Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 161
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Model-Driven Decision Support System for the Master Planning of Ceramic Supply Chains with Non-uniformity of Finished Goods

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Boza, Andres|||0000-0002-5429-0416
  • Poler, R.|||0000-0003-4475-6371
[EN] In this paper, a Model-Driven Decision Support System (DSS) for the Master Planning of ceramic Supply Chains characterized by producing units of the same finished good in a specific lot that differ in the aspect (quality), tone (colour) and/or gage (thickness) is proposed. The DSS is based on a mathematical programming model reflecting these non-uniformity characteristics. Through the different DSS functionalities, Decision Makers can generate different scenarios by means of changing any data. Optimal solution of each scenario can be evaluated for robustness under other scenarios. The Decision Maker can compare different solutions and finally choose the most satisfactory one for being implemented. To demonstrate the validity of the DSS, a realistic example is described through the generation of different scenarios based on the degree of finished goods uniformity in lots., This work has been carried out as part of the project “DPI2008-06788-C02-01 (PERMACASI)” funded by Ministerio de Ciencia e Innovación of the Spanish Government and as part of the project “PAID-06-10-2396 (NegoSol-MAS)” funded by Vicerrectorado de Investigación of Universidat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and elastic properties of defect chalcopyrite HgGa2S4 under high pressure

  • Gomis, O.|||0000-0001-6763-0638
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Luna Molina, Ramón|||0000-0001-8792-7578
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Santamaría-Pérez, D.
  • Sans, J. A.
  • Errandonea, D.
  • Pérez-González, E.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Tiginyanu, I. M.
  • Ursaki, V. V.
In this work, we focus on the study of the structural and elastic properties of mercury digallium sulfide (HgGa2S4) at high pressures. This compound belongs to the family of AB(2)X(4) ordered-vacancy compounds and exhibits a tetragonal defect chalcopyrite structure. X-ray diffraction measurements at room temperature have been performed under compression up to 15.1 GPa in a diamond anvil cell. Our measurements have been complemented and compared with ab initio total energy calculations. The axial compressibility and the equation of state of the low-pressure phase of HgGa2S4 have been experimentally and theoretically determined and compared to other related ordered-vacancy compounds. The pressure dependence of the theoretical cation-anion and vacancy-anion distances and compressibilities in HgGa2S4 are reported and discussed in comparison to other related ordered-vacancy compounds. Finally, the pressure dependence of the theoretical elastic constants and elastic moduli of HgGa2S4 has been studied. Our calculations indicate that the low-pressure phase of HgGa2S4 becomes mechanically unstable above 13.8 GPa. (C) 2013 Elsevier B. V. All rights reserved., This study was supported by the Spanish government MEC under Grants No: MAT2010-21270-C04-01/03/04 and CTQ2009-14596-C02-01, by the Comunidad de Madrid and European Social Fund (S2009/PPQ-1551 4161893), by MALTA Consolider Ingenio 2010 Project (CSD2007-00045), by Generalitat Valenciana (GVA-ACOMP-2013-1012), and by the Vicerrectorado de Investigacion y Desarrollo of the Universidad Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). E.P-G., A. M., and P.R-H. acknowledge computing time provided by Red Espa ola de Supercomputacion (RES) and MALTA-Cluster. J.A.S. acknowledges Juan de la Cierva fellowship program for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytic-numerical solution of random boundary value heat problems in a semi-infinite bar

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • García Mora, María Belén|||0000-0002-4112-5411
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
[EN] This paper deals with the analytic-numerical solution of random heat problems for the temperature distribution in a semi-infinite bar with different boundary value conditions. We apply a random Fourier sine and cosine transform mean square approach. Random operational mean square calculus is developed for the introduced transforms. Using previous results about random ordinary differential equations, a closed form solution stochastic process is firstly obtained. Then, expectation and variance are computed. Illustrative numerical examples are included., This work has been partially supported by the Ministerio de Economia y Competitividad Grant no. DPI2010-20891-C02-01 and Universitat Politecnica de Valencia Grant no. PAID06-11-2070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of expanded titanosilicate MWW-related materials from a pure silica precursor

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
Titanosilicate forms of expanded MWW-related material are synthesized starting from a pure silica precursor, ITQ-1. This procedure improves the current synthetic route of the expanded titanosilicate MWW material (Ti-YNU-1), which requires the use of a borosilicate MWW as precursor and, consequently, several postsynthetic acid treatments for removing boron atoms from the framework. The expanded Ti-MWW-related materials presented here show better activity than regular Ti-MWW in the selective epoxidation reaction of cyclohexene using H2O2 as oxidant., Financial support by the Spanish MINECO (MAT2012-37160, and Consolider Ingenio 2010-Multicat), Generalitat Valenciana by the PROMETEO program, and UPV through PAID-06-11 (no. 1952) is acknowledged. M.M. also acknowledges "Subprograma Ramon y Cajal" for the contract RYC-2011-08972.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of water and straw management practices on methane emissions from rice fields: A review through a meta-analysis

  • Sanchis Jiménez, Elena María|||0000-0001-9766-1937
  • Cambra López, María|||0000-0001-6130-9392
  • Calvet, S.|||0000-0001-6639-9892
  • Ferrer Roglán, Marta
  • Torres, Antonio G.
[EN] Rice fields contribute substantially to global warming of the atmosphere through emission of methane (CH4). This article reviews the state of the art of factors affecting CH4 emissions in rice fields, focusing on soil organic matter content and water management practices. A quantitative relationship between these factors was established through a meta-analysis based on a literature survey. This relationship can be useful to update emission factors used to estimate CH4 in the National Emission Inventories. Methane emissions in rice fields can be as much as 90% higher in continuously flooded rice fields compared with other water management practices, independent from straw addition. Water management systems that involve absence of flooding in total or for part of the growing period such as midseason drainages, intermittent flooding, and percolation control, can reduce CH4 emissions substantially. Moreover, CH4 emissions increase with the amount of straw added up to 7.7 t/ha for continuously flooded soils and up to 5.1 t/ha for other water regimes. Above these levels, no further increase is produced with further addition of straw. With regard to rice straw management mitigation strategies, recommended practices are composting rice straw, straw burning under controlled conditions, recollecting rice straw for biochar production, generation of energy, to be used as a substrate, or to obtain other byproducts with added value. This review improves the understanding of the relationship between straw application rate, water regimes, and CH4 emissions from rice fields to date. This relationship can help to select the most appropriate management practices to improve current mitigation strategies to reduce atmospheric CH4. © 2012 Mary Ann Liebert, Inc., This study was financially supported by Fundacio´n Agroalimed from the Consellerı´a de Agricultura of Valencia, Spain and the Vicerrectorado de Investigacio´n of the UPV (Programa de Apoyo a la Investigacio´n y Desarrollo, PAID06-11 Program, Project No. 1950).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Smart-Distributed Pareto Front Using ev-MOGA Evolutionary Algorithm

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Reynoso Meza, Gilberto
[EN] Obtaining multi-objective optimization solutions with a small number of points smartly distributed along the Pareto front is a challenge. Optimization methods, such as the nor- malized normal constraint (NNC), propose the use of a filter to achieve a smart Pareto front distribution. The NCC optimization method presents several disadvantages related with the procedure itself, initial condition dependency, and computational burden. In this article, the epsilon-variable multi-objective genetic algorithm (ev-MOGA) is pre- sented. This algorithm characterizes the Pareto front in a smart way and removes the disadvantages of the NNC method. Finally, examples of a three-bar truss design and controller tuning optimizations are presented for comparison purposes., This work was partially supported by the FPI-2010/19 grant and the PAID-06-11 project from the Universitat Politècnica de València, projects TIN2011-28082 and ENE2011-25900 (Spanish Ministry of Economy and Competitiveness) and the GV/2012/073 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer- and Ionic Liquid-Containing Palladium: Recoverable Soluble Cross-Coupling Catalysts

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Phosphine, palladacycle, and N-heterocyclic carbene palladium complexes are highly active homogeneous catalysts that can promote a wide range of CC and CN cross-coupling reactions. An evolution from homogeneous catalysis has been to anchor these complexes in a platform in such a way that the catalytic reaction still occurs in homogeneous phase, but the palladium complex can be recovered at the end of the reaction and reused to promote consecutive reactions. In the present review we describe those strategies to develop palladium complexes anchored to soluble polymers and ionic liquids showing the advantages and limitations of this approach to develop recyclable palladium catalysts., Financial support by the Spanish MICINN (H. G., CTQ2012-32315 and M. A., CTQ2010-18671), Universidad Politecnica de Valencia (S.N., PAID-06-11, no2095) and Generalitat Valenciana (H. G. Prometeo 2012/014 and S.N., GV/2013/040) is gratefully acknowledged. S.N. thanks the UPV for a lecturer contract (Programa Cantera)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Hydrogen Annealing on the photocatalytic activity of diamond supported gold catalysts

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Sempere Aracil, David
Fenton-treated diamond nanoparticles have been submitted to hydrogen reduction at 500 °C with the purpose of modifying the nature of the functional groups present on the diamond surface. The nature of the functional groups on the diamond samples was characterized by a combination of spectroscopic and analytical techniques. In particular, Fouriertransformed infrared spectroscopy, temperature-programmed desorption, and X-ray photoelectron spectroscopy (XPS) show the decrease in the population of carboxylic acids, esters, and anhydrides after hydrogen treatment. XPS also shows a decrease on the oxygen content after the hydrogen treatment of the diamond nanoparticles and lower electronegativity of the carbons as assessed by the lower binding energy values. Although Fentontreated diamond colloids in water changes the zeta potential from positive to negative values as a function of the pH, hydrogen annealing and the disappearance of the carboxyl groups determines that the zeta potential of the resulting sample remains positive in the complete pH range. Deposition of gold nanoparticles was carried out by the polyol method consisting on the reduction of HAuCl4 by hot ethylene glycol in the presence of the support. TEM analysis shows a variation of the average gold nanoparticle size that decreases after hydrogen reduction of carboxylic groups and becomes smaller for low gold loadings. The catalytic activity of the diamond supported gold nanoparticles as a function of the surface annealing treatment and gold loading was evaluated for the natural sunlight-assisted peroxidation of phenol by H2O2. It was observed that the most efficient sample was the one having lower gold nanoparticle size that was obtained for diamond samples reduced by hydrogen at 500 °C after the Fenton treatment and having low gold loading (0.05 wt %). Turnover frequencies above 2400 and 940 h−1 were obtained for phenol degradation and H2O2 decomposition, respectively., Financial support by the Spanish Ministry of Economy and Competitiveness (MINECO, Severo Ochoa program and CTQ 2012-32315), Universidad Politecnica de Valencia (PAID-06-11, no 2095) and Generalitat Valenciana (Prometeo 2013/014 and GV/2013/040).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dispositivo de navegación para personas invidentes basado en la tecnología Time of Flight, Navigation device for blind people based on Time-of-Flight technology

  • Lengua, Ismael|||0000-0002-4320-8325
  • Dunai, Larisa|||0000-0002-5076-0695
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
  • Defez Garcia, Beatriz|||0000-0002-3658-6766
[EN] The paper presents a new navigation and object detector device for blind people based on Time-of-Flight technology and acoustic sounds. The device has been developed as a complementary device for blind people. Its main objective is to detect and localize the obstacles from the environment and inform to the user about their presence through acoustic sounds, both in distance and in azimuth. The device working area is from 0,5m up to 5m in distance and between 30º left and 30º right of the human head, with a precision of 0,9º. The device architecture is based on glasses which contain a 3D-CMOS sensor, an FPGA with the whole electronics and software. After a short experimental period it was possible to demonstrate the importance of the development of such device for the blind community. Due to the acoustic device, blind users were able to detect obstacles from the environment, localize and avoid them., [ES] El artículo presenta un nuevo dispositivo de navegación y detección de obstáculos para las personas ciegas, basado en la tecnología Time-of-Flight y en sonidos acústicos. El dispositivo se ha desarrollado como un dispositivo de ayuda, complementario al bastón, para las personas invidentes. Su objetivo primordial es detectar los obstáculos e informar al usuario mediante sonidos acústicos de la locación de los mismos, tanto en distancia como en dirección. El dispositivo tiene un rango de trabajo entre los 0.5 m y 5 m en distancia y entre 30º izquierda y 30º derecha en azimut, con una precisión de 0,9º. El dispositivo informa a los usuarios mediante auriculares estéreo, de la presencia de los obstáculos situados en su camino. Está compuesto por un sistema de sensores 3D-CMOS montado en un par de gafas de sol, un FPGA que se encarga de procesar la información recibida por los sensores y transformarla en sonidos acústicos, y un par de auriculares estéreo. Las pruebas experimentales llevadas a cabo demuestran el potencial que puede tener para las personas invidentes. Se prueba que con la ayuda del dispositivo acústico los usuarios se sienten más seguros a la hora de transitar por las calles, debido a que tienen una amplia información sobre el entorno que los rodea, más allá de la obtenida con el bastón., El trabajo ha sido apoyado por el proyecto Nº 2062 del programa PAID-06-11 de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ZnO-based spinels grown by electrodeposition

  • Tortosa Jorques, María Dolores
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Mollar García, Miguel Alfonso|||0000-0003-4315-0407
  • Marí, B.|||0000-0003-0001-419X
We report on the synthesis of thin films of ZnCo 2O 4 and ZnMn 2O 4 spinels, as well as pure Co 3O 4 and Mn 3O 4 spinels, by means of electrodeposition. Spinel thin films have been analyzed by energy dispersive spectroscopy, X-ray diffraction, and Raman spectroscopy. We show that under determined deposition conditions the initial wurtzite structure of Co- and Mn-doped ZnO develops into spinel structures when the Co and Mn concentration in the films is above the solubility limit of these ions in the typical ZnO-wurtzite structure. © 2012 Elsevier Ltd. All rights reserved., This work was supported by Spanish Government through MICINN grants MAT2009-14625-C03-03, MAT2010-21270-C04-04 and MALTA CSD2007-0045. Financial support by the European Commission through NanoCIS project (PIRSES-GA-2010-269279) is gratefully acknowledged. Finally, we also want to acknowledge the support of Vicerrectorado de Investigacion y Desarrollo de la Universitat Politecnica de Valencia through projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct synthesis of functional zeolitic materials

  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Recently, the direct synthesis of zeolitic materials has received much attention because several well-defined functionalities have been introduced in those materials by “one-pot” methodologies. The rationalization of the physics and chemistry of the processes involved in the zeolite growth has allowed the direct preparation of different functional molecular sieves with unique properties and potential applicability in industry. In the present paper, the “one-pot” preparations of metal-containing zeolites (both in framework and extra-framework positions), hybrid organic-inorganic molecular sieves, hierarchical microporous mesoporous zeotypes, nanosheets, nanozeolites, or template-free molecular sieves are intensively evaluated., Financial support by the Spanish MINECO (MAT2012-37160), Consolider Ingenio 2010-Multicat, and UPV through PAID-06-11 (n. 1952) is acknowledged. The author also acknowledges “Subprograma Ramon y Cajal” for the contract RYC-2011-08972, and Dr. Cristina Mart´ınez and Dr. Pedro Serna for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio de la eliminación de arritmias cardíacas mediante el uso de la modelización matemática

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
  • Trujillo, Macarena
[EN] Mathematical modeling is a fast and low cost tool used as a first approach to solve certain problems in real contexts. In this paper we present an example of how a real clinical problem, in the context of cardiac surgery, can be simulated and responded to through mathematical models. Specifically, the resolution of these models, which are based on a coupled electric-thermal problem, allows us to assess in detail the temperature distribution and the geometry of the thermal lesion created in the ventricular wall after radiofrequency ablation in order to eliminate cardiac arrhythmias., [ES] El modelado matemático es una herramienta rápida y de bajo coste que se utiliza como primera aproximación para resolver determinados problemas en contextos reales. En este artículo presentamos un ejemplo de cómo a través de modelos matemáticos se puede simular y dar respuesta a un problema clínico real en el ámbito de la cirugía cardíaca. Concretamente, la resolución de estos modelos, basados en un problema electro-térmico acoplado, nos permite evaluar con detalle la distribución de temperatura y la geometría de la lesión térmica creada en la pared ventricular tras la ablación por radiofrecuencia con objeto de eliminar arritmias cardíacas., Este trabajo está financiado por el "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovación" (TEC2011-27133-C02-01), por la Universidad Politécnica de Valencia (PAID-06- 11 ref. 1988). A. González-Suárez tiene una beca VaLi+D (ACIF/2011/194) de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New polymorph of InVO4: A high-pressure structure with six-coordinated vanadium

  • Errandonea, Daniel
  • García-Domene, B.
  • Pellicer Porres, Julio
  • Katari, V.
  • Achary, S. N.
  • Tyagi, A. K.
  • Popescu, C.
  • Gomis, O.|||0000-0001-6763-0638
A new wolframite-type polymorph of InVO4 is identified under compression near 7 GPa by in situ high-pressure (HP) X-ray diffraction (XRD) and Raman spectroscopic investigations on the stable orthorhombic InVO4. The structural transition is accompanied by a large volume collapse (Delta V/V = -14%) and a drastic increase in bulk modulus (from 69 to 168 GPa). Both techniques also show the existence of a third phase coexisting with the low- and high-pressure phases in a limited pressure range close to the transition pressure. XRD studies revealed a highly anisotropic compression in orthorhombic InVO4. In addition, the compressibility becomes nonlinear in the HP polymorph. The volume collapse in the lattice is related to an increase of the polyhedral coordination around the vanadium atoms. The transformation is not fully reversible. The drastic change in the polyhedral arrangement observed at the transition is indicative of a reconstructive phase transformation. The HP phase here found is the only modification of InVO4 reported to date with 6-fold coordinated vanadium atoms. Finally, Raman frequencies and pressure coefficients in the low- and high-pressure phases of InVO4 are reported., This research supported by the Spanish government MINECO under Grant Nos. MAT2010-21270-C04-01/04 and CSD2007-00045. O.G. acknowledges support from Vicerrectorado de Investigacion y Desarrollo of UPV (Grant No. UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). S.N.A. acknowledges support provided by Universitat de Valencia during his visit to it. B.G.-D. acknowledges the financial support from MINECO through the FPI program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase behaviour of Ag2CrO4 under compression: Structural, vibrational, and optical properties

  • Santamaría Pérez, David
  • Errandonea, Daniel
  • Ruiz-Fuertes, Javier
  • Sans, Juan Ángel
  • Rodríguez-Hernández, Plácida
  • Muñoz, Alfonso
  • Bandiello, Enrico|||0000-0003-0956-3195
  • Gomis, O.|||0000-0001-6763-0638
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We have performed an experimental study of the crystal structure, lattice dynamics, and optical properties of silver chromate (Ag2CrO4) at ambient temperature and high pressures. In particular, the crystal structure, Raman-active phonons, and electronic band gap have been accurately determined. When the initial orthorhombic Pnma Ag2CrO4 structure (phase I) is compressed up to 4.5 GPa, a previously undetected phase (phase II) has been observed with a 0.95% volume collapse. The structure of phase II can be indexed to a similar orthorhombic cell as phase I, and the transition can be considered to be an isostructural transition. This collapse is mainly due to the drastic contraction of the a axis (1.3%). A second phase transition to phase III occurs at 13 GPa to a structure not yet determined. First-principles calculations have been unable to reproduce the isostructural phase transition, but they propose the stabilization of a spinel-type structure at 11 GPa. This phase is not detected in experiments probably because of the presence of kinetic barriers. Experiments and calculations therefore seem to indicate that a new structural and electronic description is required to model the properties of silver chromate., This study was supported by the Spanish government MEC under grants MAT2010-21270-C04-01/03/04 and CTQ2009-14596-C02-01, by the Comunidad de Madrid and European Social Fund (S2009/PPQ1551 4161893), by the MALTA Consolider Ingenio 2010 project (CSD2007-00045), and by the Vicerrectorado de Investigacion y Desarrollo of the Universidad Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). A.M. and P.R.-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. J.A.S. acknowledges Juan de la Cierva Fellowship Program for its financial support. Diamond and ALBA Synchrotron Light Sources are acknowledged for provisions of beam time. We also thank Drs. Peral, Popescu, and Fauth for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermogalvanic corrosion and galvanic effects of copper and AISI 316L stainless steel pairs in heavy LiBr brines under hydrodynamic conditions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Thermogalvanic corrosion of the copper/copper and AISI 316L/AISI 316L stainless steel pairs was studied in heavy lithium bromide brines under hydrodynamic conditions. The galvanic coupling effect between copper and stainless steel was also analysed. The cold electrode (25 °C) was the stainless steel for the galvanic pair, whereas copper temperature varied (25, 50 and 75 °C). A hydrodynamic circuit was designed to study thermogalvanic corrosion by means of the zero resistance ammeter technique. Hot cathodes take place in stainless steel pairs while cold cathodes are present in copper/copper and stainless steel/copper pairs; this agrees with the thermal temperature coefficient of the potential sign. Thermogalvanic corrosion increases corrosion rates, especially working with copper. Weight loss measurements show that there is a combined effect due to the thermogalvanic and the galvanic effects, The authors would like to express their gratitude to the MICINN (CTQ2009-07518), to the FPU Grant given to Rita Sanchez Tovar, to FEDER, to the Generalitat Valenciana for its help in the LSCM acquisition (MY08/ISIRM/S/100), to the Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11-1864) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the exact calculation of the fill rate in a periodic review inventory policy under discrete demand patterns

  • Guijarro, Ester|||0000-0003-1988-0397
  • Babiloni, Eugenia|||0000-0002-7949-3703
  • Cardós, Manuel
The primary goal of this paper is the development of a generalized method to compute the fill rate for any discrete demand distribution in a periodic review policy. The fill rate is defined as the fraction of demand that is satisfied directly from shelf. In the majority of related work, this service metric is computed by using what is known as the traditional approximation, which calculates the fill rate as the complement of the quotient between the expected unfulfilled demand and the expected demand per replenishment cycle, instead of focusing on the expected fraction of fulfilled demand. This paper shows the systematic underestimation of the fill rate when the traditional approximation is used, and evises both the foundations of the traditional approach and the definition of fill rate itself. As a result, this paper presents the following main contributions: (i) a new exact procedure to compute the traditional approximation for any discrete demand distribution; (ii) a more suitable definition of the fill rate in order to ignore those cycles without demand; and (iii) a new standard procedure to compute the fill rate that outperforms previous approaches, especially when the probability of zero demand is substantial. This paper ocuses on the traditional periodic review, order up to level system under any uncorrelated, discrete and stationary demand pattern for the lost sales scenario., The authors would like to thank the two anonymous referees for their thorough reading and very constructive comments on earlier versions of this paper. This work was part of a project supported by the Universitat Politecnica de Valencia, Ref. PAID-06-11/2022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and theoretical investigations on the polymorphism and metastability of BiPO4

  • Achary, S. N.
  • Errandonea, Daniel
  • Muñoz, Alfonso
  • Rodríguez Hernández, Plácida
  • Krishna, P. S. R.
  • Patwe, S. J.
  • Grover, V.
  • Tyagi, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
In this work we report the metastability and the energetics of the phase transitions of three different polymorphs of BiPO4, namely trigonal (Phase-I, space group P3(1)21), monoclinic monazite-type (Phase-II, space group P2(1)/n) and SbPO4-type monoclinic (Phase-III, space group P2(1)/m) from ambient and non-ambient temperature powder XRD and neutron diffraction studies as well as ab initio density functional theory (DFT) calculations. The symmetry ambiguity between P2(1) and P2(1)/m of the high temperature polymorph of BiPO4 has been resolved by a neutron diffraction study. The structure and vibrational properties of these polymorphs of the three polymorphs have also been reported in detail. Total energy calculations have been used to understand the experimentally observed metastable behavior of trigonal and monazite-type BiPO4. Interestingly, all of the three phases were found to coexist after heating a single phasic trigonal BiPO4 to 773 K. The irreversible nature of these phase transitions has been explained by the concepts of the interplay of the structural distortion, molar volume and total energy., This study was supported by the Spanish government MEC under grants no: MAT2010-21270-C04-01/04, by MALTA Consolider Ingenio 2010 project (CSD2007-00045), and by the Vicerrectorado de Investigacion y Desarrollo of the Universidad Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). S. N. A. acknowledges the support provided by Universitat de Valencia during his visit to it. A. M. and P. R.-H. acknowledge the computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ISO 14001 y variables económicas, ¿hay alguna relación?.Análisis de las empresas certificadas del sector cerámico español, Analysis of the impact of ISO 14001 in the economic variables of the Spanish ceramic tile industry¿s companies.

  • Peiró Signes, Angel|||0000-0002-1549-6972
  • Segarra-Oña, Marival|||0000-0001-9674-9056
  • Mondéjar-Jiménez, José
  • Vargas Vargas, Manuel
[ES] Es un hecho constatable el incremento de la adopción de prácticas medioambientales certificadas de manera formal a través de sistemas de gestión medioambiental. De su implantación, que tiene un elevado coste para las empresas, se espera la generación de beneficios, aunque no se ha documentado aún si existe relación entre la implantación de la ISO 14001 y su influencia en la mejora de los indicadores económicos a lo largo del tiempo. En este trabajo se analiza la relación entre la implantación de un sistema de gestión medioambiental, la ISO 14001 y el comportamiento económico en el corto, medio y largo plazo de las empresas del sector cerámico español. Se estudian los indicadores económicos para cada una de las 66 empresas productoras que han implantado la citada norma desde 1996 hasta el año 2009 a través de la comparación con su grupo de control. Los resultados indican que la ISO 14001 no influye en los resultados de las empresas del sector cerámico, ya que no se han encontrado diferencias significativas en los valores de ingresos de explotación ni en el incremento de los ingresos a largo plazo en ninguno de los tres horizontes temporales, corto, medio y largo plazo, obteniendo resultados opuestos a los esperados., [EN] The increased in the adoption of formally environmental certified practices through environmental management systems is a provable fact. Its implementation, which has a high cost for the companies, is expected to generate benefits, although the relation between the implementation of ISO 14001 and its influence on the improvement of economic indicators over time has not been documented. This paper analyzes the relation between the implementation of an environmental management system, the ISO 14001, and economic performance in the short, medium and long term for the companies of the Spanish ceramic tile industry. It explores the economic indicators for each of the 66 manufacturing companies which have implemented the aforementioned standard from 1996 until 2009 through a comparison with a control group. Results show that ISO 14001 does not affect the economic results of the studied companies. We have not found significant differences in the operating income values, neither in the increase in revenues in the long term in any of the three analyzed periods, contrary to the expected results., Los autores desean agradecer al Ministerio de Economía y Competitividad por el apoyo económico recibido a través del proyecto (EC02011-27369), así como a la Universitat Politècnica de València por la financiación a través de su programa de movilidad de profesores y del proyecto PAID06-2011-1879, “Impacto de las prácticas innovadoras en el “performance” medioambiental de la empresa: identificación de factores moderadores”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Implementing an exact estimation approach of the base stock for the periodic review policy based on fill rate

  • Babiloni, Eugenia|||0000-0002-7949-3703
  • Guijarro, Ester|||0000-0003-1988-0397
  • Cardós, Manuel
[EN] Recent developments on the fill rate estimation in periodic review stock policies provide new techniques for setting up the stock policy parameters including exact procedures. However, the implementation of this method in real environments may be a difficult task due to issues such as the availability of demand data, the identification of an appropriate demand distribution pattern and the target fill rate established for each item according to a global target fill rate. This paper focuses on the modifications needed in the information management system of a company in order to implement an exact estimation procedure of the stock policies taking advantage of available data., This research was part of a project supported by the Universitat Politècnica de València, with reference number PAID-06-11/2022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pair-end inexact mapping on hybrid GPU environments and out-of-core indexes

  • Salavert Torres, José|||0000-0001-6309-4401
  • Tomás Domínguez, Andrés Enrique
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
  • Medina Castelló, Ignacio
  • Sadakane, Kunihiko
[EN] Due to the NGS data deluge, sequence mapping has become an intensive task that, depending on the experiment, may demand high amounts of computing power or memory capacity. On the one hand, GPGPU architectures have become a cost-effective solution that outperforms common processors in specific tasks. On the other hand, out-of-core implementations allow to directly access data from secondary memory, which may be useful when mapping against big indexes in systems with low memory configurations. In this paper we discuss the implementation of backward search methods for inexact mapping in these two different study cases. A hybrid CPU-GPU implementation of a backward search algorithm capable of obtaining the pair-ends and the one error mappings of a read has been developed. This implementation can be used to increase the sensitivity and reduce the number of reads to be analysed with a dynamic programming approach. Also, a CPU out-of-core index using MMAP has been studied (provided by csalib). Such index can be used in memory limited scenarios, in which the time of loading many different big genomes into memory is greater than the time needed to map the reads., The authors would like to thank the Universitat Politècnica de Valencia (Spain) in the frame of the grant “High-performance tools for the alignment of genetic sequences using graphic accelerators (GPGPUs) / Herramientas de altas prestaciones para el alineamiento de secuencias genéticas mediante el uso de aceleradores gráficos (GPGPUs)”, research program PAID- 06-11, code 2025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the traces of the solutions of the anisotropic hyperbolic heat equation with irregular heat sources

  • López Molina, Juan Antonio
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
We present some results about the traces of solutions of the anisotropic hyperbolic heat equation over the boundary of cylindrical open sets of types Ω x ]0, T [ and Ωx ]0, ∞[, when the heat sources are irregular distributions., Partially supported by the PAID-06-11 UPV grant, Ref. 1988. The research for the first named author was partially supported by Generalitat Valenciana, Conselleria d'Educació, Cultura i Esport, Spain, Grant PROMETEO/2013/058.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Complex high-pressure polymorphism of barium tungstate

  • Gomis, O.|||0000-0001-6763-0638
  • Sans, J. A.
  • Lacomba-Perales, R.
  • Errandonea, D.
  • Meng, Y.
  • Chervin, J. C.
  • Polian, A.
We have studied BaWO 4 under compression at room temperature by means of x-ray diffraction and Raman spectroscopy. When compressed with neon as a pressure-transmitting medium (quasihydrostatic conditions), we found that BaWO 4 transforms from its low-pressure tetragonal structure into a much denser monoclinic structure. This result confirms our previous theoretical prediction based on ab initio calculations that the scheelite to BaWO 4-II transition occurs at room temperature if kinetic barriers are suppressed by pressure. However, our experiment without any pressure- transmitting medium has resulted in a phase transition to a completely different structure, suggesting nonhydrostaticity may be responsible for previously reported rich polymorphism in BaWO 4. The crystal structure of the low- and high-pressure phases from the quasihydrostatic experiments has been Rietveld refined. Additionally, for the tetragonal phase the effects of pressure on the unit-cell volume and lattice parameters are discussed. Finally, the pressure evolution of the Raman modes of different phases is reported and compared with previous studies. © 2012 American Physical Society., This research was supported by Spanish MEC (Grant No. MAT2010-21270-C04-01/04), MALTA Consolider Ingenio 2010 (Grant No. CSD2007-00045), and Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (Grants No. UPV2011-0914 PAID-05-11 and No. UPV2011-0966 PAID-06-11). XRD data were collected at HPCAT, Advanced Photon Source (APS), Argonne National Laboratory. HPCAT is supported by CIW, CDAC, UNLV, and LLNL through funding from DOE-NNSA, DOE-BES, and NSF. APS is supported by DOE-BES under Contract No. DEAC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constructing mean square approximations of decomposable space-time uncertainty diffusion models

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Villafuerte, L.
[EN] In this paper mixed diffusion models under decomposable space-time uncertainty are studied. Existence conditions for constructing a mean square convergent series stochastic solution process are given. Methods for constructing numerical mean square approximations and computing the expectation and variance are illustrated by an example., This work has been partially supported by the Spanish Ministery of Economy and Competitiveness grants MTM2009-08587, DPI2010– 20891–C02–01, Universitat Politècnica de València grant PAID06-11-2070 and Mexican CONACYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electronic and elastic properties of yttrium gallium garnet under pressure from ab initio studies

  • Monteseguro, V.
  • Rodríguez-Hernández, P.
  • Lavín, V.
  • Muñoz, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
In this paper, we present an ab initio study within the framework of density functional theory employing the generalized gradient approximation applied to the study of the structural, elastic, and electronic properties of yttrium gallium garnet, Y3Ga5O12, under hydrostatic pressure. The calculated structural ground state properties are in good agreement with the available experimental data. Pressure dependence of the elastic constants and the mechanical stability are analysed up to 90 GPa, showing that the garnet is mechanically unstable above 84 GPa. We also present the electronic band structure calculations which show that upon compression the fundamental direct gap first increases up to 63 GPa and later monotonically decreases under pressure. (C) 2013 AIP Publishing LLC., This work has been supported by Ministerio de Ciencia e Innovacion of Spain (MICINN) under the National Program of Materials (MAT2010-21270-C04-02/03/04) and the Consolider-Ingenio 2010 Program (MALTA CSD2007-0045), by the Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11) and by the EU-FEDER funds. V. Monteseguro wishes to thank MICINN for the FPI Grant (BES-2011-044596). We thank the computer time provided by the Red Espanola de Supercomputacion (RES).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Rodrigues-type formula for Gegenbauer matrix polynomials

  • Defez Candel, Emilio|||0000-0002-3303-6371
This paper centers on the derivation of a Rodrigues-type formula for the Gegenbauer matrix polynomial. A connection between Gegenbauer and Jacobi matrix polynomials is given, This research has been supported by the Universitat Politecnica de Valencia under grant PAID-06-11-2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Could the heat sink effect of blood flow inside large vessels protect the vessel wall from thermal damage during RF-assisted surgical resection?

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
  • Burdío, Fernando
  • Andaluz, Anna
Purpose: To assess by means of computer simulations whether the heat sink effect inside a large vessel (portal vein) could protect the vessel wall from thermal damage close to an internally cooled electrode during radiofrequency (RF)-assisted resection. Methods: First, in vivo experiments were conducted to validate the computational model by comparing the experimental and computational thermal lesion shapes created around the vessels. Computer simulations were then carried out to study the effect of different factors such as device-tissue contact, vessel position, and vessel-device distance on temperature distributions and thermal lesion shapes near a large vessel, specifically the portal vein. Results: The geometries of thermal lesions around the vessels in thein vivo experiments were in agreement with the computer results. The thermal lesion shape created around the portal vein was significantly modified by the heat sink effect in all the cases considered. Thermal damage to the portal vein wall was inversely related to the vessel-device distance. It was also more pronounced when the device-tissue contact surface was reduced or when the vessel was parallel to the device or perpendicular to its distal end (blade zone), the vessel wall being damaged at distances less than 4.25 mm. Conclusions: The computational findings suggest that the heat sink effect could protect the portal vein wall for distances equal to or greater than 5 mm, regardless of its position and distance with respect to the RF-based device. © 2014 American Association of Physicists in Medicine., This work received financial support from the Spanish "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion" Grant No. TEC2011-27133-C02-01 and -02, also from the Universitat Politecnica de Valencia (INNOVA11-01-5502; and PAID-06-11 Ref. 1988). A. Gonzalez-Suarez is the recipient of a Grant VALi+d (ACIF/2011/194) from the Generalitat Valenciana. E.B and F.B. declare a stock ownership in Apeiron Medical S.L. This company has a license for Patent U.S. 8.303.584, on which the device considered in this study is based. The remaining authors have no conflict of interest or financial ties to disclose.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gaseous and particulate emission profiles during controlled rice straw burning

  • Sanchis Jiménez, Elena María|||0000-0001-9766-1937
  • Calvet, S.|||0000-0001-6639-9892
  • Cambra López, María|||0000-0001-6130-9392
  • Ferrer Roglán, Marta
  • C. Coscollà
  • V. Yusà
[EN] Burning of rice straw can emit considerable amounts of atmospheric pollutants. We evaluated the effect of rice straw moisture content (5%, 10% and 20%) on the emission of carbon dioxide (CO2) and on the organic and inorganic constituents of released particulate matter (PM): dioxins, heavy metals, and polycyclic aromatic hydrocarbons (PAHs). Four burning tests were conducted per moisture treatment using the open chamber method. Gaseous emission profiles of carbon monoxide (CO), sulfur dioxide (SO2), nitrogen monoxide (NO), and nitrogen dioxide (NO2) were also measured. Additionally, combustion characteristics, including burning stages, durations, combustion efficiency, temperature, and relative humidity, were recorded. Burning tests showed flaming and smoldering stages were significantly longer in 20% moisture treatment (P<0.05) compared with the rest. The amount of burned straw and ashes decreased with increasing straw moisture content (P<0.001). Carbon dioxide was the main product obtained during combustion with emission values ranging from 692 g CO2 kg dry straw-1 (10% moisture content) to 835 g CO2 kg dry straw-1 (20% moisture content). Emission factors for PM were the highest in 20% moisture treatment (P<0.005). Fine PM (PM2.5) accounted to more than 60% of total PM mass. Emission factors for dioxins increased with straw moisture content, being the highest in 20% moisture treatment, although showing a wide variability among burning tests (P>0.05). Emissions factors for heavy metals were low and similar among moisture treatments (P>0.05). Emission factors for individual PAHs were generally higher in 20% moisture treatment. Average SO2 and NO emissions decreased with moisture content. In contrast, CO emissions increased with moisture content. Overall, emission factors of atmospheric pollutants measured in our study were higher in the 20% moisture content. This difference could be attributed to the incomplete combustion at higher levels of rice straw moisture content. According to our results, rice straw burning should be done after straw drying and under minimal moisture conditions to lower pollutant emission levels., Authors thank Ignacio Iturriaga and Eduardo Loma, members of the Fire Brigade of Valencia, for providing support during rice straw burning tests. This study was financially supported by the Vicerrectorado de Investigacion of the UPV (Programa de Apoyo a la Investigacion y Desarrollo, PAID-06-11 Program, Project No. 1950).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of the ignition and combustion processes of a dual-fuel spray under diesel-like conditions using computational fluid dynamics (CFD) modeling

  • López, J. Javier|||0000-0002-9486-2511
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Winklinger, Johannes Franz
Recent research activities in the field of diesel engines have shown the potential to reduce pollutant emissions and improve the thermal efficiency by controlling the fuel reactivity. However, understanding the impact of blending fuels with different physical and especially chemical properties on diesel-like spray mixing and combustion processes is still a challenge. Since the experimental techniques are still far from providing detailed temporal and spatial information about local spray conditions, computational fluid dynamics (CFD) modeling tools have become the key source of information for investigating the characteristics of these dual-fuel sprays. In this frame, the present research focuses on modeling a dual-fuel spray in diesel-like conditions, comparing different gasoline and diesel blends in terms of ignition characteristics and flame structure. The results confirm the suitability of the state of the art computational CFD modeling tools for reproducing the complex phenomena associated to dual-fuel sprays. Moreover, the important benefits provided by dual-fuel blends, considering the expected reduction in pollutant emissions as a consequence of the differences observed in terms of flame structure, are confirmed., The authors thank Dr. Jose Manuel Pastor for his support during this work and for sharing his profound knowledge and experience. Support for this research was provided by the Universitat Politecnica de Valencia inside the program Programas de Apoyo a la I + D + I, Primeros proyectos de investigacion (reference PAID-06-11 2033) and by the Ministerio de Ciencia e Innovacion inside the VeLoSoot project (TRA 2008_06448), which is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct synthesis of a titanosilicate molecular sieve containing large and medium pores in its structure

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The direct synthesis of the titanosilicate form of ITQ-39 is reported. This is the first description of the direct preparation of a titanosilicate molecular sieve containing large and medium pores in the same structure. The characterization clearly indicates the presence of Ti atoms in tetrahedral coordination in the framework of ITQ-39 zeolite. This material is very active in the oxidation of lineal and cyclic olefins with H2O2, showing selectivities between TS-1 and Ti-Beta. (C) 2012 Elsevier Inc. All rights reserved., Financial support by the Spanish MEC (Consolider Ingenio 2010-Multicat), Generalitat Valenciana by the PROMETEO program and UPV through PAID-06-11 (n.1952) is acknowledged. Manuel Moliner acknowledges to "Subprograma Ramon y Cajal" for the contract RYC-2011-08972. Jose Gaona is also acknowledged for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Automatic deployment of a consensus networks MAS

  • Gómez ., Yolanda
  • Palomares Chust, Alberto|||0000-0002-4583-467X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
The main goal of the work here presented is the easy deployment in real multi-agent systems of consensus processes. MAGENTIX2 agent platform has been used to implement real agents that follow the consensus algorithm to reach agreements., This work is supported by TIN2012-36586-C03-01 and PROMETEO/2008/051 projects of the Spanish government, CONSOLIDER-INGENIO 2010 under grant CSD2007-00022, and PAID-06-11-2084
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon monoxide effects on human ventricle action potential assessed by mathematical simulations

  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Cardona-Urrego, Karen Eliana
  • Rajamani, Sridharan
  • Belardinelli, Luiz
  • Giles, Wayne R.
Carbon monoxide (CO) that is produced in a number of different mammalian tissues is now known to have significant effects on the cardiovascular system. These include: (i) vasodilation, (ii) changes in heart rate and strength of contractions, and (iii) modulation of autonomic nervous system input to both the primary pacemaker and the working myocardium. Excessive CO in the environment is toxic and can initiate or mediate life threatening cardiac rhythm disturbances. Recent reports link these ventricular arrhythmias to an increase in the slowly inactivating, or “late” component of the Na+ current in the mammalian heart. The main goal of this paper is to explore the basis of this pro-arrhythmic capability of CO by incorporating changes in CO-induced ion channel activity with intracellular signaling pathways in the mammalian heart. To do this, a quite well-documented mathematical model of the action potential and intracellular calcium transient in the human ventricular myocyte has been employed. In silico iterations based on this model provide a useful first step in illustrating the cellular electrophysiological consequences of CO that have been reported from mammalian heart experiments. Specifically, when the Grandi et al. model of the human ventricular action potential is utilized, and after the Na+ and Ca2+ currents in a single myocyte are modified based on the experimental literature, early after-depolarization (EAD) rhythm disturbances appear, and important elements of the underlying causes of these EADs are revealed/illustrated. Our modified mathematical model of the human ventricular action potential also provides a convenient digital platform for designing future experimental work and relating these changes in cellular cardiac electrophysiology to emerging clinical and epidemiological data on CO toxicity., In Valencia, this work was supported by: (i) VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica from the Ministerio de Economia y Competitividad of Spain (TIN2012-37546-0O3-01) and the European Commission (European Regional Development Funds-ERDF-FEDER)., (ii) Plan Avanza en el marco de la Accion Estrategica de Telecomunicaciones y Sociedad de la Informacion del Ministerio de Industria Turismo y Comercio of Spain (TSI-020100-2010-469), (iii) Programa deApoyo a la Investigacion y Desarrollo (PAID-06-11-2002) de la Universitat Politecnica de Valencia, (iv) Programa Prometeo (PROMETEO/2012/030) de la Conselleria d'Educacio Formacio I Ocupacio, Generalitat Valenciana, and (v) GileadSciences, Ltd. Wayne Giles acknowledges receipt of financial support in the form of a salary award (Medical Scientist) from Alberta Innovates-Health Solutions, and operating funding from the Canadian Institutes for Health Research and the Heart and Stroke Foundation of Alberta.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A three-dimensional human atrial model with fiber orientation. Electrograms and arrhythmic activation patterns relationship

  • Tobón Zuluaga, Catalina
  • Ruiz Villa, Carlos Alberto
  • Heidenreich, Elvio
  • Hornero, Fernando
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
The most common sustained cardiac arrhythmias in humans are atrial tachyarrhythmias, mainly atrial fibrillation. Areas of complex fractionated atrial electrograms and high dominant frequency have been proposed as critical regions for maintaining atrial fibrillation; however, there is a paucity of data on the relationship between the characteristics of electrograms and the propagation pattern underlying them. In this study, a realistic 3D computer model of the human atria has been developed to investigate this relationship. The model includes a realistic geometry with fiber orientation, anisotropic conductivity and electrophysiological heterogeneity. We simulated different tachyarrhythmic episodes applying both transient and continuous ectopic activity. Electrograms and their dominant frequency and organization index values were calculated over the entire atrial surface. Our simulations show electrograms with simple potentials, with little or no cycle length variations, narrow frequency peaks and high organization index values during stable and regular activity as the observed in atrial flutter, atrial tachycardia (except in areas of conduction block) and in areas closer to ectopic activity during focal atrial fibrillation. By contrast, cycle length variations and polymorphic electrograms with single, double and fragmented potentials were observed in areas of irregular and unstable activity during atrial fibrillation episodes. Our results also show: 1) electrograms with potentials without negative deflection related to spiral or curved wavefronts that pass over the recording point and move away, 2) potentials with a much greater proportion of positive deflection than negative in areas of wave collisions, 3) double potentials related with wave fragmentations or blocking lines and 4) fragmented electrograms associated with pivot points. Our model is the first human atrial model with realistic fiber orientation used to investigate the relationship between different atrial arrhythmic propagation patterns and the electrograms observed at more than 43000 points on the atrial surface., This work was partially supported by the Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica, Ministerio de Ciencia e Innovacion of Spain (TEC2008-02090), by the Plan Avanza (Accion Estrategica de Telecomunicaciones y Sociedad de la Informacion), Ministerio de Industria Turismo y Comercio of Spain (TSI-020100-2010-469), by the Programa Prometeo 2012 of the Generalitat Valenciana and by the Programa de Apoyo a la Investigacion y Desarrollo de la Universitat Politecnica de Valencia (PAID-06-11-2002). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances in the synthesis of titanosilicates: From the medium pore TS-1 zeolite to highly-accessible ordered materials

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In the present review, we would like to cover the most fundamental advances achieved in the design of ordered titanosilicates since the earlier discovery of TS-1 reported by EniChem in the mid-eighties. The invention of the medium-pore TS-1 zeolite was a breakthrough, and this material has been applied as efficient catalyst in diverse industrial applications. However, its limited pore size (5 5.5 Å) offers diffusion limitations when working with large molecules. The design and preparation of open titanosilicates, such as large pore molecular sieves, mesoporous ordered materials, or layered-type zeolites will be described. The applicability of these titanosilicates to catalytic oxidation processes requiring bulky organic molecules will also be presented., This work has been supported by the Spanish GovernmentMINECO (MAT2012-37160), Consolider Ingenio 2010-Multicat, and UPV through PAID-06-11 (n.1952). Manuel Moliner also acknowledges to ‘‘Subprograma Ramon y Cajal’’ for the contract RYC-2011-08972. ITQ thanks the ‘‘Program Severo Ochoa’’ for financial support (SEV 2012 0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isostructural second-order phase transition of b-Bi2O3 at high pressures: an experimental and theoretical study

  • Pereira, Andre L. J.
  • Sans Tresserras, Juan Ángel
  • Gomis, O.
  • Rodriguez-Hernandez, Placida
  • Muñoz, Alfonso
  • Popescu, Catalin
  • Beltran, Armando
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We report a joint experimental and theoretical study of the structural and vibrational properties of synthetic sphaerobismoite (beta-Bi2O3) at high pressures in which room-temperature angle-dispersive X-ray diffraction (XRD) and Raman scattering measurements have been complemented with ab initio total energy and lattice dynamics calculations. Striking changes in Raman spectra were observed around 2 GPa, whereas X-ray diffraction measurements evidence no change in the tetragonal symmetry of the compound up to 20 GPa; however, a significant change exists in the compressibility when increasing pressure above 2 GPa. These features have been understood by means of theoretical calculations, which show that beta-Bi2O3 undergoes a pressure-induced isostructural phase transition near 2 GPa. In the new isostructural beta' phase, the Bi3+ and O2- environments become more regular than those in the original beta phase because of the strong decrease in the activity of the lone electron pair of Bi above 2 GPa. Raman measurements and theoretical calculations provide evidence of the second-order nature of the pressure-induced isostructural transition. Above 20 GPa, XRD measurements suggest a partial amorphization of the sample despite Raman measurements still show weak peaks, probably related to a new unknown phase which remains up to 27 GPa. On pressure release, XRD patterns and Raman spectra below 2 GPa correspond to elemental Bi-I, thus evidencing a pressure-induced decomposition of the sample during downstroke., Financial support from the Spanish Consolider Ingenio 2010 Program (MALTA Project CSD2007-00045) is acknowledged. This work was also supported by Brazilian Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Project 201050/2012-9, Spanish MICINN under Projects MAT2010-21270-004-01/03/04 and MAT2013-46649-C4-2/3/4-P, Spanish MINECO under Project CTQ2012-36253-C03-02, and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. JAS. acknowledges Juan de la Cierva fellowship program for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Contribution of the flowing conditions to the galvanic corrosion of the copper/AISI 316L coupling in highly concentrated LiBr solutions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The galvanic corrosion of copper/AISI 316L stainless steel couples has been studied under different temperatures and flowing conditions in heavy LiBr brines. The mixed potential theory, zero-resistance ammeter and weight loss measurements were performed. Temperature and Reynolds number increase galvanic corrosion rates of copper. Statistical analysis by means of multilevel factorial design reveals that temperature greatly affects galvanic current densities. Additionally, the mixed potential theory suggests that thermogalvanic corrosion may occur when the materials of the pair work at different temperatures. The most important increase of current densities due to thermogalvanic effects takes place at high Reynolds numbers with the highest difference of temperature between copper/AISI 316L pairs and the anode operating at 25 °C. The results obtained with the different techniques are in good agreement., The authors would like to express their gratitude to the FPU grant given to Rita Sanchez Tovar, MICINN (CTQ2009-07518), to FEDER, to the Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11-1864), to the Generalitat Valenciana for its help in the LSCM acquisition (MY08/ISIRM/S/100) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Propiedades acústicas de láminas multicapa a partir de residuos de neumático

  • Segura Alcaraz, Jorge Gabriel|||0000-0001-8296-3609
  • Crespo, J.E|||0000-0003-1372-4289
  • Juliá Sanchis, Ernesto|||0000-0003-2940-3906
  • Gadea Borrell, José María|||0000-0003-0740-8781
  • Nadal Gisbert, Antonio Vicente
  • Delgado, A.
[ES] En este trabajo se realiza un estudio de la absorción acústica de paneles multicapa conformados a partir de materiales provenientes de neumáticos reciclados (GTR´s), tratando de dar una repuesta al problema medioambiental generado por estos residuos. El artículo se enmarca como un primer paso para la evaluación de la absorción acústica de estos nuevos paneles multicapa para su aplicación como barreras acústicas, insonorización de maquinaria y equipos industriales, acondicionamiento acústico de recintos, etc. Se han preparado dos tipos básicos de paneles multicapa con 10 y 20 mm de espesor. Cada panel multicapa está constituido por tres capas de diferentes espesores siempre con la disposición fibra-caucho-fibra. Para determinar el coeficiente de absorción se ha utilizado el método del tubo de impedancia acústica. Para el caucho se ha trabajado con granulometrías de entre 0,7 y 2,2-4 mm. Los resultados demuestran que los paneles multicapa con caucho de granulometría 2,2-4 mm presentan una mayor absorción acústica dentro del rango de frecuencia estudiado (400-3500 Hz)., Este trabajo forma parte del Proyecto de Investigación PAID-06-11, dentro del plan de I+D+i financiado por la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical modeling of the propagation of democratic support of extreme ideologies in Spain:Causes, Effects and Recommendations for its stop

  • De la Poza, Elena|||0000-0003-2303-0811
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Pricop, Adriana Georgiana
This paper deals with the construction of a discrete population mathematical model for the short-term forecast until January 2016 of the electoral support of extreme ideology parties in Spain. Firstly, the nontrivial concept of extreme ideology is stated. Then, the electoral register is split in three subpopulations: supporters of extremist parties, abstentions/blank voters, and supporters of establishment parties. The model takes into account the following variables: economy measured throughout the Spanish unemployment rate; demography quantified in terms of birth and death rates and emigration; sociopolitical situation measured by the Spanish poverty indicator, trust on the Government labor indicator (GLI), and the indicator of political trust. By considering the dynamic subpopulations transits built throughout data obtained from public and private prestigious institutions and sociopolitical analysis, a system of difference equations models the electoral population behavior in Spain allowing us to compute the expected electoral support in the time horizon of January 2016. Sensitivity analysis versus uncertain parameters is performed in order to improve the reliability of the model results., The authors of this paper would like to thank Phd. Pauwels from Universite Libre de Bruxelles and also Professor Eva Anduiza and her coworkers from Universidad Autonoma de Barcelona (UAB) for their valuable comments that have enriched our research. The authors would also thank the Universitat Poliecnica de Valencia since this paper has been financed through the Grant PAID06-11-2070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical approximations of second-order matrix differential equations using higher-degree splines

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Solis Lozano, Francisco Javier
Many studies of mechanical systems in engineering are based on second-order matrix models. This work discusses the second-order generalization of previous research on matrix differential equations dealing with the construction of approximate solutions for non-stiff initial problems Y 00(x) = f(x, Y (x), Y 0 (x)) using higher-degree matrix splines without any dimensional increase. An estimation of the approximation error for some illustrative examples are presented by using Mathematica. Several MatLab functions have also been developed, comparing, under equal conditions, accuracy and execution times with built-in MatLab functions. Experimental results show the advantages of solving the above initial problem by using the implemented MatLab functions., The authors wish to thank for financial support by the Universidad Politecnica de Valencia [grant number PAID-06-11-2020].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The dynamics over the next few years of the Spanish mobile telecommunications market share: a mathematical modelling approach

  • Cervelló Royo, Roberto Elías|||0000-0002-8304-4177
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Santonja, F.
Taking into account available data from 2002 to 2009 about the market share percentages of the Spanish mobile telecommunications service providers, a dynamic diffusion model to study the evolution of the clients’ change between the different companies during the period 2010–2016 is proposed. The constructed model provides a tool for forecasting short-term trends about the customers’ preferences with respect to mobile network operators taking into account both, autonomous decisions due to direct marketing and advertising strategies, and also decisions adopted through interaction via social influence. The model can provide insights to companies for designing strategies in order to gain market share., This work has been partially supported by the FIS PI-10/01433; the Spanish Government and European Regional Development Fund (FEDER) [grant number MTM2009-08587]; and the Universitat Politecnica de Valencia [grant number PAID06-11-2070].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determining the first probability density function of linear random initial value problems by the Random Variable Transformation (RVT) technique: A comprehensive study

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
Deterministic differential equations are useful tools for mathematical modelling. The consideration of uncertainty into their formulation leads to random differential equations. Solving a random differential equation means computing not only its solution stochastic process but also its main statistical functions such as the expectation and standard deviation. The determination of its first probability density function provides a more complete probabilistic description of the solution stochastic process in each time instant. In this paper, one presents a comprehensive study to determinate the first probability density function to the solution of linear random initial value problems taking advantage of the so-called random variable transformation method. For the sake of clarity, the study has been split into thirteen cases depending on the way that randomness enters into the linear model. In most cases, the analysis includes the specification of the domain of the first probability density function of the solution stochastic process whose determination is a delicate issue. A strong point of the study is the presentation of a wide range of examples, at least one of each of the thirteen casuistries, where both standard and nonstandard probabilistic distributions are considered., This work has been partially supported by the Ministerio de Economia y Competitividad under Grant no. DPI2010-20891-C02-01 and Universitat Politecnica de Valencia under Grant no. PAID06-11-2070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

HgGa2Se4 under high pressure: an optical absorption study

  • Gomis, O.
  • Ruiz-Fuertes, Javier
  • Pérez-González, E.
  • López-Solano, J.
  • Errandonea, Daniel
  • Segura, Alfredo
  • Rodríguez-Hernández, Placida
  • Muñoz, A.
  • Ursaki, Veacheslav
  • Tiginyanu, Ivan M.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Bandiello, Enrico|||0000-0003-0956-3195
High-pressure optical absorption measurements have been performed in defect chalcopyrite HgGa2Se4 to investigate the influence of pressure on the bandgap energy and its relation with the pressure-induced order-disorder processes that occur in this ordered-vacancy compound. Two different experiments have been carried out in which the sample undergoes either a partial or a total pressure-induced disorder process at 15.4 and 30.8GPa, respectively. It has been found that the direct bandgap energies of the recovered samples at 1GPa were around 0.15 and 0.23eV smaller than that of the original sample, respectively, and that both recovered samples have different pressure coefficients of the direct bandgap than the original sample. A comprehensive explanation for these results on the basis of pressure-induced order-disorder processes is provided., This study was supported by the Spanish government MEC under Grants No: MAT2010-21270-C04-01/03/04 and MAT2013-46649-C4-1/2/3-P, by MALTA Consolider Ingenio 2010 project (CSD2007-00045), by Generalitat Valenciana (GVA-ACOMP-2013-1012 and GVA-ACOMP-2014-243), and by the Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). E. P.-G., J. L.-S., P. R.-H, and A. M. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. J.R.-F. thanks the Alexander von Humboldt foundation for a postdoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forecasting Latin America’s Country Risk Scores by Means of a Dynamic Diffusion Model

  • Cervelló Royo, Roberto Elías|||0000-0002-8304-4177
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Sánchez Sánchez, A.
  • Santonja, F.
Over the last years, worldwide financial market instability has shaken confidence in global economies. Global financial crisis and changes in sovereign debts ratings have affected the Latin American financial markets and their economies. However, Latin American s relative resilience to the more acute rise in risk seen in other regions like Europe during last years is offering investors new options for improving risk-return trade-offs. Therefore, forecasting the future of economic situation involves high levels of uncertainty. The Country Risk Score (CRS) represents a broadly used indicator to measure the current situation of a country regarding measures of economic, political, and financial risk in order to determine country risk ratings. In this contribution, we present a diffusion model to study the dynamics of the CRS in 18 Latin American countries which considers both the endogenous effect of each country policies and the contagion effect among them. The model predicts quite well the evolution of the CRS in the short term despite the economic and political instability. Furthermore, the model reproduces and forecasts a slight increasing trend, on average, in the CRS dynamics for almost all Latin American countries over the next months., This work has been partially supported by the Spanish M.C.Y.T. Grants MTM2009-08587 as well as the Universitat Politecnica de Valencia Grant PAID06-11 (ref. 2070).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dealing with dependent uncertainty in modelling : a comparative study case through the airy equation

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
The consideration of uncertainty in differential equations leads to the emergent area of random differential equations. Under this approach, inputs become random variables and/or stochastic processes. Often one assumes that inputs are independent, a hypothesis that simplifies the mathematical treatment although it could not bemet in applications. In this paper,we analyse, through the Airy equation, the influence of statistical dependence of inputs on the output, computing its expectation and standard deviation by Fröbenius and Polynomial Chaos methods.The results are compared with Monte Carlo sampling. The analysis is conducted by the Airy equation since, as in the deterministic scenario its solutions are highly oscillatory, it is expected that differences will be better highlighted. To illustrate our study, and motivated by the ubiquity of Gaussian random variables in numerous practical problems, we assume that inputs follow a multivariate Gaussian distribution throughout the paper. The application of Fröbenius method to solve Airy equation is based on an extension of the method to the case where inputs are dependent. The numerical results show that the existence of statistical dependence among the inputs and its magnitude entails changes on the variability of the output., This work has been partially supported by the Ministerio de Economia y Competitividad Grants MTM2009-08587 and DPI2010-20891-C02-01 and Universitat Politecnica de Valencia Grant PAID06-11-2070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of a bridge failure due to fire using computational fluid dynamics and finite element models

  • Alós Moya, José
  • Paya-Zaforteza, Ignacio
  • Garlock, Maria E.M.
  • Loma-Ossorio, Eduardo
  • Schiffner, Daniel
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
Bridge fires are a major concern because of the consequences that these kind of events have and because they are a real threat. However, bridge fire response is under researched and not covered in the codes. This paper studies the capabilities of numerical models to predict the fire response of a bridge and provides modeling guidelines useful for improving bridge design. To reach this goal, a numerical analysis of the fire of the I-65 overpass in Birmingham, Alabama, USA in 2002 is carried out. The analyses are based on computational fluid dynamics (CFD) for creating the fire model, and finite element (FE) software for obtaining the thermo-mechanical response of the bridge. The models are validated with parametric studies that consider heat release rate of the spilled fuel, discretization of the fire temperature in the transition from CFD to FE modeling, and boundary conditions. The validated model is used in a study to evaluate the influence of fire scenario (CFD versus standard fires), and live load. Results show that numerical models are able to simulate the response of the bridge and can be used as a basis for a performance-based approach for the design of bridges under fire. Additionally, it is found that applying the Eurocode standard and hydrocarbon fires along the full length of the bridge does not adequately represent a real bridge fire response for medium-long span bridges such as this case study. The study also shows that live loads essentially do not influence the response of the bridge. (C) 2014 Elsevier Ltd. All rights reserved., Funding for this research has been provided by the Spanish Ministry of Science and Innovation (research project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). Funding has also been provided to Dr. Maria Garlock by the National Science Foundation (NSF) under award number CMMI-1068252. The authors are grateful to R. King from the Federal Highway Administration of the USA, J. Black and T. Colquett from the Alabama Department of Transportation, J. Glassman from Princeton University, J.V. Aguado from Ecole Centrale de Nantes and to J. Hidalgo from the University of Edinburgh for all the information and support provided. All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy sets to model master production effectively in Make to Stock companies with Lack of Homogeneity in the Product

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Poler, R.|||0000-0003-4475-6371
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Supply chains (SCs) with Lack of Homogeneity in the Product (LHP) present inherent sources of uncertainty due to the heterogeneity of raw materials and uncontrollable productive factors. LHP SCs are characterized by producing units of the same finished goods that are not homogeneous. However, the exact quantity of each one in a production lot will only be known when it is produced. These SCs must classify finished goods into subtypes according to customer requirements. In this paper, a fuzzy mathematical programming model is proposed. To match homogeneity customer requirements with the sizing of production lots, the proposed master plan considers two main aspects: 1) forecast demand is expressed in terms of number of orders with a similar order size; 2) LHP is modeled by considering that each production lot is split into several homogeneous sub-lots. Then uncertainty is considered by means of fuzzy sets in order sizes and homogeneous sub-lots quantities. The fuzzy model is evaluated by emulating real conditions and is compared with the equivalent deterministic one to assess its robustness. The results demonstrate that the fuzzy approach outperforms the deterministic one and that it is more effective for handling real situations when LHP is present., This research has been carried out within the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Essential oils as additives in biodegradable films and coatings for active food packaging

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Background: Petroleum derivate plastics represent a serious environmental problem, which is why alternative sustainable solutions must be found. To this aim, recent research has focused on the development of edible/biodegradable packaging for food products. The implementation of this novel packaging requires analyzing thoroughly the effect of the ingredients used on the most relevant properties of the material. Scope and approach: Essential oils represent an interesting ingredient for biodegradable food packaging, mainly due to their natural origin and their functional (antioxidant/antimicrobial) properties, allowing for obtaining active materials aiming to extend shelf-life and add value to the product. However, their inclusion in edible/biodegradable films for food packaging may imply some impact on several properties of the system (such as optical, tensile¿), affecting in turn the consumer acceptability. Before the increasing research on biodegradable materials for food packaging, and the growing interest on natural food additives, this paper aims to review the latest findings on how essential oils impact the most relevant properties of edible films and coatings, namely microstructural, physical (tensile, barrier, optical), antioxidant and antimicrobial. Key findings and conclusions: Essential oil incorporation affects the continuity of the polymer matrix, leading to physical changes depending on the specific polymer-oil components interactions. Generally, the film structure is weakened by the oil addition, whereas the water barrier properties are improved and the transparency is reduced. Essential oils may provide the films with antioxidant and/or antimicrobial properties. The oil composition and the specific interactions with the polymer determine its effectiveness as an active ingredient., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-11-2013 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2013/152).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On some properties of the Laplacian matrix revealed by the RCM algorithm

  • Pedroche Sánchez, Francisco|||0000-0001-6521-4331
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Palomares Chust, Alberto|||0000-0002-4583-467X
In this paper we present some theoretical results about the irreducibility of the Laplacian matrix ordered by the Reverse Cuthill-McKee (RCM) algorithm. We consider undirected graphs with no loops consisting of some connected components. RCM is a well-known scheme for numbering the nodes of a network in such a way that the corresponding adjacency matrix has a narrow bandwidth. Inspired by some properties of the eigenvectors of a Laplacian matrix, we derive some properties based on row sums of a Laplacian matrix that was reordered by the RCM algorithm. One of the theoretical results serves as a basis for writing an easy MATLAB code to detect connected components, by using the function “symrcm” of MATLAB. Some examples illustrate the theoretical results., The research has been supported by Spanish DGI grant MTM2010-18674, Consolider Ingenio CSD2007-00022, PROMETEO 2008/051, OVAMAH TIN2009-13839-C03-01, and PAID-06-11-2084.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving continuous models with dependent uncertainty: a computational approach

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Santonja, F.
This paper presents a computational study on a quasi-Galerkin projection-based method to deal with a class of systems of random ordinary differential equations (r.o.d.e.'s) which is assumed to depend on a finite number of random variables (r.v.'s). This class of systems of r.o.d.e.'s appears in different areas, particularly in epidemiology modelling. In contrast with the other available Galerkin-based techniques, such as the generalized Polynomial Chaos, the proposed method expands the solution directly in terms of the random inputs rather than auxiliary r.v.'s. Theoretically, Galerkin projection-based methods take advantage of orthogonality with the aim of simplifying the involved computations when solving r.o.d.e.'s, which means to compute both the solution and its main statistical functions such as the expectation and the standard deviation. This approach requires the previous determination of an orthonormal basis which, in practice, could become computationally burden and, as a consequence, could ruin the method. Motivated by this fact, we present a technique to deal with r.o.d.e.'s that avoids constructing an orthogonal basis and keeps computationally competitive even assuming statistical dependence among the random input parameters. Through a wide range of examples, including a classical epidemiologic model, we show the ability of the method to solve r.o.d.e.'s., This work has been partially supported by the Spanish M.C.Y.T. Grants: DPI2010-20891-C02-01 and FIS PI-10/01433; the Universitat Politecnica de Valencia Grant: PAID06-11-2070, and the Universitat de Valencia Grant: UV-INV-PRECOMP12-80708.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Construction of RC building structures: ICITECH&apos, s experience during the last 30 years

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Adam, Jose M|||0000-0002-9205-8458
[EN] This paper contains a summary of the experience obtained by ICITECH's researchers at the Universitat Politècnica de València in the last thirty years of investigating reinforced concrete (RC) building structures under construction. During this period ambitious experimental campaigns and advanced computational simulations have been carried out, and new analytical methods have been formulated to assess slab-shore load transmissions in buildings under construction. From all these campaigns the following main conclusions can be derived: 1) the importance of considering construction processes when planning building projects; 2) the use of analytical methods to evaluate construction processes adapted to the current requirements of efficiency and sustainability; and 3) the need to improve the robustness of temporary shoring or propping structures. Improving the construction sector necessarily involves the implementation of the above measures in buildings under construction and the use of new monitoring and inspection technologies for the construction processes applied., The authors are grateful to the Spanish Ministry of Education, Culture and Sport (FPU13/02466), the Spanish Ministry for Science and Technology (BIA2004-02085), the Generalitat Valenciana (GV/2015/063), Universitat Politècnica de València (PAID-06-11), Encofrados J. Alsina S.A., Levantina, Ingeniería y Construcción S.L., SACYR, Lafarge, Ros Casares, Copasa, and ACSA, which collectively funded this line of research. They also truly appreciate the collaboration of different researchers in various projects, with a special mention for: Y. A. Alvarado, I. Gasch, B. Torres-Górriz, D. Di Palma, T. M. Pellicer, I. Payá-Zaforteza, J. Catalá, E. Pellicer and F. J. Pallarés.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calculation of the Approaches to Cycle Service Level in Continuous Review Policy: A Tool for Corporate Entrepreneur

  • Estelles-Miguel, Sofia|||0000-0001-6119-373X
  • Albarracín Guillem, José Miguel|||0000-0001-6130-9405
  • Palmer Gato, Marta Elena
  • Cardós, Manuel
[EN] This paper presents two new approximations to compute the Cycle Service Level (CSL) in a continuous review policy, as a tool for corporate entrepreneur. These approximations are not only for the backordering case but also for the lost sales one. In order to develop it we focus on transforming a form of periodic review policy in a model of continuous review policies. As a result, the analogy and the transformation proposed in this paper are different from Silver classical model. Due to huge complexity of the exact CSL calculus the aproximate methods are needed. The entrepreneurial dimension, based on internal reorganization and innovation, is an inherent, indispensable part of the discovery and creation of opportunities. Accordingly, this article contributes to the firms¿ pursuit of competitive advantages by presenting methods of internal management for corporate entrepreneurship. Efficient stock-taking is a key issue for lowering production cost and boosting competitive advantages, and, by examining this area, this paper makes a significant contribution to the study of corporate entrepreneurship., This research is part of a project supported by the Universitat Politècnica de València, with reference number PAID-06-11/2022
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast inexact mapping using advanced tree exploration on backward search methods

  • Salavert Torres, José|||0000-0001-6309-4401
  • Tomás Domínguez, Andrés Enrique
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
  • Tárraga Giménez, Joaquín
  • Medina Castelló, Ignacio
  • Dopazo Blazquez, Joaquin
Background: Short sequence mapping methods for Next Generation Sequencing consist on a combination of seeding techniques followed by local alignment based on dynamic programming approaches. Most seeding algorithms are based on backward search alignment, using the Burrows Wheeler Transform, the Ferragina and Manzini Index or Suffix Arrays. All these backward search algorithms have excellent performance, but their computational cost highly increases when allowing errors. In this paper, we discuss an inexact mapping algorithm based on pruning strategies for search tree exploration over genomic data. Results: The proposed algorithm achieves a 13x speed-up over similar algorithms when allowing 6 base errors, including insertions, deletions and mismatches. This algorithm can deal with 400 bps reads with up to 9 errors in a high quality Illumina dataset. In this example, the algorithm works as a preprocessor that reduces by 55% the number of reads to be aligned. Depending on the aligner the overall execution time is reduced between 20–40%. Conclusions: Although not intended as a complete sequence mapping tool, the proposed algorithm could be used as a preprocessing step to modern sequence mappers. This step significantly reduces the number reads to be aligned, accelerating overall alignment time. Furthermore, this algorithm could be used for accelerating the seeding step of already available sequence mappers. In addition, an out-of-core index has been implemented for working with large genomes on systems without expensive memory configurations., The authors would like to thank the Universitat Politecnica de Valencia (Spain) in the frame of the grant "High-performance tools for the alignment of genetic sequences using graphic accelerators (GPGPUs)/Herramientas de altas prestaciones para el alineamiento de secuencias geneticas mediante el uso de aceleradores graficos (GPGPUs)", research program PAID-06-11, code 2025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A heuristic to minimize the inventory value of repairable parts with service constraints: application to an airline company

  • Cardós, Manuel
  • Babiloni, Eugenia|||0000-0002-7949-3703
  • Palmer Gato, Marta Elena
  • Guijarro, Ester|||0000-0003-1988-0397
[EN] Purpose: This paper focuses on the improvement of the inventory management of repairable parts of the airline company Air Nostrum. The company uses a common sales replacement policy to manage their repairable parts and the same target fill rate for every item. This target is very high in order to assure a high availability of the aircrafts, dealing also to a high inventory value. Design/methodology/approach: However, this paper shows that an alternative heuristic approach outperforms the previous one terms of inventory value while fulfilling the target fill rate. Findings: This improvement is illustrated with an extensive and real dataset and may lead to a significant inventory reduction. Originality/value: Therefore, a company can design its inventory policies applying this heuristic focused on inventory reduction with a service level constraint instead of the usual cost optimization or service level fulfillment., UPV/PAID06-11/2022
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Can electroporation previous to radiofrequency hepatic ablation enlarge thermal lesion size? A feasibility study based on theoretical modelling and in vivo experiments

  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
  • Castellvi, Quim
  • Burdío, Fernando
  • Sánchez Velázquez, Patricia
  • Ivorra, Antoni
  • Andaluz, Anna
Purpose: The aim of this study was to assess the feasibility of a hybrid ablative technique based on applying electroporation (EP) pulses just before conducting radiofrequency ablation (RFA). The rationale was that the EP-induced reduction in blood perfusion could be sufficient to reduce the thermal sink effect and hence to increase the coagulation volume in comparison to that created exclusively by RFA. Materials and methods: A modelling study and in vivo experimental study were used. A Cool-tip RF applicator was used both for EP and RFA. Results: Overall, the results did not show any synergy effect from using the hybrid technique. Applying EP pulses prior to RFA did not increase the coagulation zone obtained and the lesions were almost identical. Additional computer simulations provided an explanation for this; the effect of reducing blood perfusion by thermal damage during RFA completely masks the effect of reducing blood perfusion by EP. This is because both thermal damage and EP affect the same zone, i.e. the tissue around the electrode. Conclusions: Our computer modelling and in vivo experimental findings suggest that the combination of EP and RFA with monopolar applicators does not provide an additional benefit over the use of RFA alone., This work received financial support from the Spanish 'Plan Nacional de I + D + I del Ministerio de Ciencia e Innovacion' Grant nos. TEC2011-27133-C02-01,02 and TEC2010-17285, from the European Commission through the Marie Curie IRG grant TAMIVIVE (256376) and from the Universitat Politecnica de Valencia (INNOVA11-01-5502; and PAID-06-11 Ref. 1988). The linguistic revision of this paper was funded by the Universitat Politecnica de Valencia, Spain. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using Portable EEG Devices to Evaluate Emotional Regulation Strategies during Virtual Reality Exposure

  • Rey, Beatriz|||0000-0001-9213-1443
  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] As Virtual Reality (VR) is starting to be used to train emotional regulation strategies, it would be interesting to propose objective techniques to monitor the emotional reactions of participants during the virtual experience. In this work, the main goal is to analyze if portable EEG systems are adequate to monitor brain activity changes caused by the emotional regulation strategies applied by the participants. The EEG signals captured from subjects that navigate through a virtual environment designed to induce a negative mood will be compared between three experimental groups that will receive different instructions about the emotional regulation strategies to apply. The study will allow us to validate the possibilities of portable EEG devices to monitor emotional regulation strategies during VR exposure., This study was funded by Vicerrectorado de Investigación de la Universitat Politècnica de València, Spain, PAID-06-2011, R.N. 1984; by Ministerio de Educación y Ciencia, Spain, Project Game Teen (TIN2010-20187) and partially by projects Consolider-C (SEJ2006-14301/PSIC), “CIBER of Physiopathology of Obesity and Nutrition, an initiative of ISCIII” and Excellence Research Program PROMETEO (Generalitat Valenciana. Consellería de Educación, 2008-157). The work of A. Rodríguez was supported by the Spanish MEC under an FPI Grant BES-2011-043316.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constructing adaptive generalized polynomial chaos method to measure the uncertainty in continuous models: A computational approach

  • Chen Charpentier, Benito Miguel
  • Licea Salazar, Juan Antonio
  • Santonja, F.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
Due to errors in measurements and inherent variability in the quantities of interest, models based on random differential equations give more realistic results than their deterministic counterpart. The generalized polynomial chaos (gPC) is a powerful technique used to approximate the solution of these equations when the random inputs follow standard probability distributions. But in many cases these random inputs do not have a standard probability distribution. In this paper, we present a step-by-step constructive methodology to implement directly a useful version of adaptive gPC for arbitrary distributions, extending the applicability of the gPC. The paper mainly focuses on the computational aspects, on the implementation of the method and on the creation of a useful software tool. This tool allows the user to easily change the types of distributions and the order of the expansions, and to study their effects on the convergence and on the results. Several examples illustrating the usefulness of the method are included., This work has been partially supported by the Spanish M.C.Y.T. grants: MTM2013-41765-P and TRA2012-36932; FIS PI10/01433; Universitat Politecnica de Valencia grants: PAID06-11-2070 and PAID-00-11-2753, and Universitat de Valencia grant: UV-INV-PRECOMP12-80708.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A numerical investigation on the fire response of a steel girder bridge

  • Paya-Zaforteza, I.
  • Garlock, Maria E.M.
The response of bridges subject to fire is an under researched topic despite the number of bridge failures caused by fire. Since available data shows that steel girder bridges are especially vulnerable to fire, this paper delves into their fire response by analyzing with a 3D numerical model the response of a typical bridge of 12.20 m span length. A parametric study is performed considering: (1) two possibilities for the axial restraint of the bridge deck, (2) four types of structural steel for the girders (carbon steel and stainless steel grades 1.4301, 1.4401, and 1.4462), (3) three different constitutive models for carbon steel, (4) four live loads, and (5) two alternative fire loads (the hydrocarbon fire defined by Eurocode 1 and a fire corresponding to a real fire event). Results show that restraint to deck expansion coming from an adjacent span or abutment should be considered in the numerical model. In addition, times to collapse are very small when the bridge girders are built with carbon steel (between 8.5 and 18 min) but they can almost double if stainless steel is used for the girders. Therefore, stainless steel is a material to consider for steel girder bridges in a high fire risk situation, especially if the bridge is located in a corrosive environment and its aesthetics deserves special attention. The methodology developed in this paper and the results obtained are useful for researchers and practitioners interested in developing and applying a performance-based approach for the design of bridges against fire. © 2012 Elsevier Ltd. All rights reserved., Funding for this research has been provided to Dr. Paya-Zaforteza by the Spanish Ministry of Education (contract number EX-2008-0669 of the Program for Postdoctoral Stays), the Spanish Ministry of Economy and Competitiveness (research project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). Funding has also been provided to Dr. Maria Garlock by the National Science Foundation (NSF) under award number CMMI-1068252. All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation and Mechanistic Investigation of the Arrhythmogenic Role of the Late Sodium Current in Human Heart Failure

  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Cardona Urrego, Karen Eliana
  • Gómez García, Juan Francisco
  • Rajamani, Sridharan
  • Belardinelli, Luiz
Heart failure constitutes a major public health problem worldwide. The electrophysiological remodeling of failing hearts sets the stage for malignant arrhythmias, in which the role of the late Na + current (I NaL) is relevant and is currently under investigation. In this study we examined the role of I NaL in the electrophysiological phenotype of ventricular myocytes, and its proarrhythmic effects in the failing heart. A model for cellular heart failure was proposed using a modified version of Grandi etal. model for human ventricular action potential that incorporates the formulation of I NaL. A sensitivity analysis of the model was performed and simulations of the pathological electrical activity of the cell were conducted. The proposed model for the human I NaL and the electrophysiological remodeling of myocytes from failing hearts accurately reproduce experimental observations. The sensitivity analysis of the modulation of electrophysiological parameters of myocytes from failing hearts due to ion channels remodeling, revealed a role for I NaL in the prolongation of action potential duration (APD), triangulation of the shape of the AP, and changes in Ca 2+ transient. A mechanistic investigation of intracellular Na + accumulation and APD shortening with increasing frequency of stimulation of failing myocytes revealed a role for the Na +/K + pump, the Na +/Ca 2+ exchanger and I NaL. The results of the simulations also showed that in failing myocytes, the enhancement of I NaL increased the reverse rate-dependent APD prolongation and the probability of initiating early afterdepolarizations. The electrophysiological remodeling of failing hearts and especially the enhancement of the I NaL prolong APD and alter Ca 2+ transient facilitating the development of early afterdepolarizations. An enhanced I NaL appears to be an important contributor to the electrophysiological phenotype and to the dysregulation of [Ca 2+] i homeostasis of failing myocytes. © 2012 Trenor et al., This work was partially supported by the European Commission preDiCT grant (DG-INFSO-224381), by the Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica del Ministerio de Ciencia e Innovacion of Spain (TEC2008-02090), by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-09-2843, PAID-06-11-2002) de la Universidad Politecnica de Valencia, by the Direccion General de Politica Cientifica de la Generalitat Valenciana (GV/2010/078). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This work was also supported by Gilead Sciences Palo Alto. Dr. Rajamani and Dr. Belardinelli are employees of Gilead Sciences and have collaborated in the study design and manuscript preparation. No additional external funding received for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Algoritmos Evolutivos y su empleo en el ajuste de controladores del tipo PID: Estado Actual y Perspectivas, Evolutionary Algorithms for PID controller tuning: Current Trends and Perspectives

  • Reynoso Meza, Gilberto
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[ES] Los controladores PID continúan siendo una solución fiable, robusta, práctica y sencilla para el control de procesos. Actualmente constituyen la primera capa de control de la gran mayoría de las aplicaciones industriales. De ahí que un número importante de trabajos de investigación se han orientado a mejorar su rendimiento y prestaciones. Las líneas de investigación en este campo van desde nuevos métodos de ajuste, pasando por nuevos tipos de estructura hasta metodologías de diseño integrales. Particularizando en el ajuste de parámetros, una de las formas de obtener una solución novedosa consiste en plantear un problema de optimización, el cual puede llegar a ser no-lineal, no-convexo y con restricciones. Dado que los algoritmos evolutivos han mostrado un buen desempeño para solucionar problemas complejos de optimización, han sido utilizados en diversas propuestas relacionadas con el ajuste de controladores PID. Este trabajo muestra un revisión de estas propuestas y las prestaciones obtenidas en cada caso. Así mismo, se identifican algunas tendencias y posibles líneas de trabajo futuras., [EN] PID controllers are a reliable, robust, practical and easy to implement control solution for industrial processes. They provide the first control layer for a vast majority of industrial applications. Owing to this, several researches invest time and resources to improve their performance. The research lines in this field scope with new tuning methods, new types of structures and integral design methods. For tuning methods, improvements could be fulfilled stating an optimization problem, which could be non-linear, non-convex and highly constrained. In such instances, evolutionary algorithms have shown a good performance and have been used in various proposals related with PID controllers tuning. This work shows a review of these proposals and the benefits obtained in each case. Some trends and possible future research lines are also identified., Este trabajo ha sido realizado parcialmente gracias al apoyo del Ministerio de Economía y Competitividad (Gobierno de España) mediante los proyectos TIN2011 - 28082, ENE2011- 25900; la Generalitat Valenciana mediante la iniciativa GV/2012/ 073 y la Universitat Politècnica de València a travès de la beca FPI-2010/19 y la iniciativa de investigacion PAID-06-11.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient numerical integration for N th-order non-autonomous linear differential equations

  • Bader, Philipp Karl Heinz
  • Casas, Fernando
  • Ponsoda Miralles, Enrique
  • Blanes Zamora, Sergio|||0000-0001-5819-8898
We consider the numerical integration of high-order linear non-homogeneous differential equations, written as first order homogeneous linear equations, and using exponential methods. Integrators like Magnus expansions or commutator-free methods belong to the class of exponential methods showing high accuracy on stiff or oscillatory problems, but the computation of the exponentials or their action on vectors can be computationally costly. The first order differential equations to be solved present a special algebraic structure (associated with the companion matrix) which allows to build new methods (hybrid methods between Magnus and commutator-free methods). The new methods are of similar accuracy as standard exponential methods with a reduced complexity. Additional parameters can be included into the scheme for optimization purposes. We illustrate how these methods can be obtained and present several sixth-order methods which are tested in several numerical experiments., PB, SB and FC acknowledge the Ministerio de Economia y Competitividad (Spain) for financial support through the coordinated project MTM2013-46553-C3-3-P. PB also acknowledges the support through the FPU fellowship AP2009-1892. FC has been additionally supported by NPRP GRANT #5-674-1-114 from the Qatar National Research Fund. EP has been partially supported by the Universitat Politecnica de Valencia under project 2087.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crystal Chemistry of CdIn2S4, MgIn2S4, and MnIn2S4 thiospinels under high pressure

  • Santamaría Pérez, David
  • Amboage, Mónica
  • Errandonea, Daniel
  • Muñoz, Alfonso
  • Rodríguez Hernández, Plácida
  • Mújica, Andrés
  • Radescu, Silvana
  • Ursaki, Veacheslav
  • Tinginyanu, Ivan
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We report X-ray diffraction measurements in CdIn2S4, MgIn2S4, and MnIn2S4 thiospinels at room temperature and high pressures. The pressure dependences of the structural parameters have been determined and compared to those from theoretical calculations. It is found that the three thiospinels have similar bulk moduli (B-0) between 75 and 80 GPa (B-0' similar to 3). The degree of inversion of these thiospinels has also been determined. The three thiospinels undergo a phase transition toward a defect LiTiO2-type structure above 9.5, 8.3, and 6.8 GPa in CdIn2S4, MgIn2S4, and MnIn2S4, respectively. Interestingly, the low- and high-pressure phases belong to the same symmetry group (Fd-3m), the transition mechanism being associated to the migration of the tetrahedrally coordinated cations to a Wyckoff position of higher multiplicity, where these cations present an octahedral environment. The new postspinel phase exhibits a larger compressibility than the spinel phase for the three compounds, likely due to the presence of stoichiometric vacancies in the unit cell as it occurs for defect chalcopyrites and stannites. The relation between the bulk and the polyhedral compressibilities is discussed as well., Financial support from the Spanish Consolider Ingenio 2010 Program (Project No. CDS2007-00045) is acknowledged. The work was also supported by Spanish MICCIN under projects CTQ2009-I4596-C02-01 and MAT2010-21270-C04-01/03/04, as well as by Comunidad de Madrid and European Social Fund, S2009/PPQ-1551 4161893 (QUIMAPRES), and by Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. We acknowledge the European Synchrotron Radiation Facility for provision of beamtime.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of combustion models based on tabulated chemistry and presumed probability density function approach for diesel spray simulation

  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Winklinger, Johannes Franz
[EN] Two combustion models of different complexity have been implemented in a RANS solver in the CFD platform OpenFOAM. Both models rely on the flame prolongation of ILDM (FPI) method, which allows the use of detailed chemistry mechanisms at relatively low computational costs. The homogeneous autoignition (HAI) model, directly using the chemical data from the FPI tabulation, does not take into account subgrid turbulence-chemistry interaction. Therefore, the second, more advanced model combines the FPI method with a presumed conditional moment approach. This auto-ignition-presumed conditional moment (AI-PCM) model accounts for the fluctuations of the mixture fraction and the progress variable caused by the turbulent flow. Both models have been evaluated by means of a parametric study of a single diesel spray at varying initial temperatures and oxygen concentration levels. The results obtained with the CFD models have been compared with experimental data from the engine combustion network (ECN). The comparison of the two models demonstrates the important role of the subgrid turbulence-chemistry interaction on the accuracy of the auto-ignition process and the diesel flame structure, as indicated by the agreement of the AI-PCM predictions with the measured data., Support for this research was provided by the Universitat Politecnica de Valencia inside the program Programas de Apoyo a la I + D + I, Primeros proyectos de investigacion (reference PAID-06-11 2033), which is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dominant frequency and organization index maps in a realistic three-dimensional computational model of atrial fibrillation

  • Tobón Zuluaga, Catalina
  • Rodriguez, Jose Felix
  • Hornero, Fernando
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
Aims To study, using simulation, the spectral characteristics of different patterns of atrial fibrillation (AF) at high spatial resolution. Dominant frequency (DF) and organization index (OI) maps have been used to approximate the location of the focal source of high frequency during AF events. Methods and results A realistic three-dimensional model of the human atria that includes fibre orientation, electrophysiological heterogeneity, and anisotropy was implemented. The cellular model was modified to simulate electrical remodelling. More than 43 000 electrograms were calculated on the surface, and were processed to reconstitute the DF and OI maps. Atrial fibrillation episodes were triggered by a source of transitory and of continuous activity (both with a cycle length of 130 ms) in five different locations. The maps obtained during the AF events triggered by transitory foci did not show areas with high DF or OI values. When continuous foci were applied, the DF maps show ample zones with high values in the atrium where the focus was applied; while OI maps display smaller areas with high values, always within the areas of high DF and, in three of five locations, this high-value area was located at the site of focus application and at the nearby area. In the other two locations, the area presenting the highest OI values is small and located at the site of focus application, which allowed its precise localization. Conclusion Organization index maps provide a better approximation than DF maps for the localization of ectopic sources of high frequency and continuous activity during episodes of simulated AF in remodelled tissue., This work was partially supported by the Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica, Ministerio de Ciencia e Innovacion of Spain (TEC2008-02090); the Plan Avanza (Accion Estrategica de Telecomunicaciones y Sociedad de la Informacion), Ministerio de Industria Turismo y Comercio of Spain (TSI-020100-2010-469); the Programa Prometeo 2012 of the Generalitat Valenciana; and the Programa de Apoyo a la Investigacion y Desarrollo of the Universitat Politecnica de Valencia (PAID-06-11-2002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure studies of topological insulators Bi2Se3,Bi2Te3, and Sb2Te3

  • Manjón, F. J.
  • Pérez-González, E.
  • Santamaría-Pérez, D.
  • Marín-Borrás, V.
  • Segura-García del Río, A.
  • González, Jesús
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Drasar, C.
  • Kucek, V.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Gomis, O.|||0000-0001-6763-0638
  • Muñoz-Sanjosé, V.
Bi2Se3, Bi2Te3, and Sb2Te3 are narrow bandgap semiconductors with tetradymite crystal structure (R-3m) which have been extensively studied along with their alloys due to their promising operation as thermoelectric materials in the temperature range between 300 and 500¿K. Studies on these layered semiconductors have increased tremendously in the last years since they have been recently predicted and demonstrated to behave as 3D topological insulators. In particular, a number of high-pressure studies have been done in the recent years in these materials. In this work we summarize the main results of the high-pressure studies performed in this family of semiconductors to date. In particular, we review recent results that address the main characteristics of the pressure-induced electronic topological transition and structural phase transitions observed in this family of compounds. Future high-pressure studies to be performed on these 3D topological insulators are also commented., This study was supported by the Spanish government and EU-FEDER under Grants: MAT2008-06873-C02-02, TEC2011-28076-C02-02, MAT2010-21270-C04-01/03/04, and by MALTA Consolider Ingenio 2010 project (CSD2007-00045). Due acknowledgement is also given to Generalitat Valenciana through projects Prometeo GV2011/035 and ISIC/2012/008. We are also indebted to the Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). E. P-G., A. M., and P. R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Some examples of detection of connected components in undirected graphs by using the Laplacian matrix and the RCM algorithm

  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Palomares Chust, Alberto|||0000-0002-4583-467X
  • Pedroche Sánchez, Francisco|||0000-0001-6521-4331
[EN] In this paper we use the recent method L-RCM, developed by the authors, to detect connected components in undirected graphs. The method uses the ordering RCM as a rst step and the computation of the row sums of the Laplacian matrix as a second step. We make the computations in MATLAB. We show the use of the method in three examples., This work is supported by Spanish DGI grant MTM2010-18674, Consolider Ingenio CSD2007-00022, PROMETEO 2008/051, OVAMAH TIN2009-13839-C03-01, and PAID-06-11-2084.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Using dynamic, full cache locking and genetic algorithms for cache size minimization in multitasking, preemptive, real-time systems

  • Martí-Campoy, Antonio|||0000-0002-6009-8703
  • Rodríguez-Ballester, Francisco|||0000-0002-4087-5077
  • Ors Carot, Rafael|||0000-0003-2787-4683
Cache locking have shown during the last years their usefulness easing the schedulability analysis of multitasking, preemptive, real-time systems. Cache locking provides a high degree of predictability while system performance is maintained at a similar level to that provided by regular, highly unpredictable, non-locked cache. Cache locking may also be useful to reduce hardware costs by means of reducing the size of the cache memory needed to make a real-time system schedulable.This work shows how full, dynamic cache locking may help to reduce the size of the cache memory versus a regular cache. This reduction is possible thanks to a genetic algorithm that selects the set of instructions that have to be locked in cache to provide the maximum cache size minimization while keeping the system schedulable., This work is partially supported by PAID-06-11/2055 of Universitat Politècnica de València and TIN2011-28435-C03-01 of Ministerio de Ciencia e Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Convergence of Weighted-average consensus for undirected graphs

  • Pedroche Sánchez, Francisco|||0000-0001-6521-4331
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Palomares Chust, Alberto|||0000-0002-4583-467X
[EN] In this note we address the problem of reaching a consensus in an undirected network where the nodes interchange information with their neighbors. Each node is provided with a value X_i and a weight w_i. The specific goal of the consensus is that each node will be aware of the weighted-average consensus value, in a distributed way, that is to say without a central control. We show the applicability of a theoretical result about reaching a consensus following an iterative algorithm., This work is supported by Spanish DGI grant MTM2010-18674, Consolider Ingenio CSD2007-00022, PROMETEO 2008/051, OVAMAH TIN2009-13839-C03-01, and PAID-06-11-2084.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient one-pot preparation of Cu-SSZ-13 materials using cooperative OSDAs for their catalytic applications in the SCR of NOx

  • Martínez Franco, Raquel
  • Thogersen, Joakim R.
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
The cooperative use of the Cu-tetraethylenepentamine complex and N,N,N-trimethyl-1-adamantammonium as organic structure-directing agents (OSDAs) enabled the rationalized one-pot preparation of Cu-containing SSZ-13 zeolites. A detailed study of different synthetic variables permitted the control of the Si/Al and Cu/(Si+Al) ratios in the final solids. Cu-SSZ-13 molecular sieves synthesized in alkaline media demonstrate excellent catalytic activities and good hydrothermal stabilities for the selective catalytic reduction of NOx. Finally, the effect of synthesis media on the catalytic active sites is also demonstrated and a remarkable activity loss for samples synthesized in fluoride media is observed., This work has been supported by Haldor-Topsoe, the Spanish Government-MINECO (MAT2012-37160), Consolider Ingenio 2010-Multicat, and UPV through PAID-06-11 (n. 1952). M.M. also acknowledges the "Subprograma Ramon y Cajal" for the contract RYC-2011-08972. The Instituto de Tecnologia Quimica thanks the "Program Severo Ochoa" for financial support (SEV 2012 0267). The authors thank Isabel Millet for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-containing zeolites as efficient catalyst for the transformation of highly valuable chiral biomass-derived products

  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
Metal-containing zeolites, especially Sn-Beta, perform as very efficient heterogeneous catalysts in the selective oxidation of levoglucosenone, which is considered as a platform chemical for the production of highly-valuable chemicals, towards the synthesis of the optically pure gamma-lactone(S)-gamma-hydroxymethyl-alpha,beta-butenolide (HBO) using H2O2 as an oxidizing agent. Using Sn-Beta as a catalyst, yields up to 75% of (S)-gamma-hydroxymethyl-alpha,beta-butenolide are achieved in a "one-pot" cascade reaction. When Sn-Beta is combined with an acid resin, such as Amberlyst-15, the "two-step" process allows yields up to 90%., This work has been supported by the Spanish Government MINECO through Consolider Ingenio 2010-Multicat and MAT2012-37160, and by UPV through PAID-06-11 (n.1952). Manuel Moliner also acknowledges "Subprograma Ramon y Cajal" for contract RYC-2011-08972. ITQ thanks the "Program Severo Ochoa" for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Impact of Social policies, Promotion and the Moderating Role of Location on firms Environmental Scores

  • Mondejar Jimenez, Jose
  • Peiró Signes, Angel|||0000-0002-1549-6972
  • Segarra-Oña, Marival|||0000-0001-9674-9056
[EN] The objective of present research was to analyze environmental scores in companies when adopting external social policies. We confirmed that location acts as a differentiating factor. We also analyzed the human rights, community and product responsibility policies interaction with Environmental Scores. Our first hypothesis stated that social policies contribute to orientate companies toward environmental aspects and improving environmental scores. The results supported the assumption that better environmental scores are influenced positively by the promotion of social policies. We can conclude that the promotion of social policies positively affects the environmental orientation of the firm. We can argue that company s capacity to operate guaranteeing the freedom association and excluding child, forced or compulsory labor, to be a good citizen protecting public health and to produce quality goods and services is a measure of being more sensible to promote environmental aspects among their structures and processes. The differences between firms that promote external social policies and those that don t are evident. Finally, we have determined how location moderates the relative impact of each policy in the environmental performance., The authors would like to thank the Spanish Economy and Competitiveness Ministry for its support through the research project (ECO2011-27369 & ECO2012-36685), and the Universitat Politècnica de València for its research funding to the project (PAID06-2011-1879).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LUT saving in embedded FPGAs for cache locking in real-time systems

  • Martí-Campoy, Antonio|||0000-0002-6009-8703
  • Rodríguez-Ballester, Francisco|||0000-0002-4087-5077
  • Ors Carot, Rafael|||0000-0003-2787-4683
[EN] In recent years, cache locking have appeared as a solution to ease the schedulability analysis of real-time systems using cache memories maintaining, at the same time, similar performance improvements than regular cache memories. New devices for the embedded market couple a processor and a programmable logic device designed to enhance system flexibility and increase the possibilities of customisation in the field. This arrangement may help to improve the use of cache locking in real-time systems. This work proposes the use of this embedded programmable logic device to implement a logic function that provides the cache controller the information it needs in order to determine if a referenced main memory block has to be loaded and locked into the cache; we have called this circuit a Locking State Generator. Experiments show the requirements in terms of number of hardware resources and a way to reduce them and the circuit complexity. This reduction ranges from 50% up to 80% of the number of hardware resources originally needed to build the Locking State Generator circuit., This work has been partially supported by PAID-06-11/2055 of Universitat Politecnica de València and TIN2011-28435- C03-01 of Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive step ODE algorithms for the 3D simulation of electric heart activity with graphics processing units

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Millet Roig, José|||0000-0002-8879-003X
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Liberos Mascarell, Alejandro
  • Climent, Andreu M.
In this paper we studied the implementation and performance of adaptive step methods for large systems of ordinary differential equations systems in graphics processing units, focusing on the simulation of three-dimensional electric cardiac activity. The Rush-Larsen method was applied in all the implemented solvers to improve efficiency. We compared the adaptive methods with the fixed step methods, and we found that the fixed step methods can be faster while the adaptive step methods are better in terms of accuracy and robustness. (c) 2013 Elsevier Ltd. All rights reserved., This work has been partially funded by Universitat Politecnica de Valencia through Programa de Apoyo a la InvestigaciOn y Desarrollo (PAID-06-11) and (PAID-05-12), by Generalitat Valenciana through projects PROMETEO/2009/013 and Ayudas para la realizacion de proyectos de I+D para grupos de investigacion emergentes GV/2012/039, and by Ministerio Espafiol de Economia y Competitividad through project TEC2012-38142-004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In order to evaluate the impact of chitosan on the physical properties of wheat starch-glycerol films, part of the wheat starch was replaced by chitosan, and the effect of composition on the properties of both the films and the film-forming dispersions was studied. The latter became more stable and viscous as the chitosan proportion was increased in the mixture. Both polymers appeared to integrate homogeneously in the film matrix. The combined effect of the glycerol and chitosan proportions affected the mechanical and barrier properties of the films. The tensile strength and elastic modulus of the films were improved as chitosan ratio increased. The oxygen and water vapor permeability slightly increased in line with the amount of chitosan in the blend although the induced differences were very small. Chitosan ratio directly affected the antimicrobial properties of the films, which showed a significant bactericide activity when the chitosan-starch ratio in the film was 50%. Nevertheless, at a starch:chitosan ratio of 80:20, counts of coliforms did not exceed the initial value in the meat after 7 storage days., The authors acknowledge the financial support from Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2010-20694 and Universidad Politecnica de Valencia (projects PAID-06-09-2834 and PAID-06-11-2013). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate and efficient matrix exponential computation

  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Ruíz Martínez, Pedro Antonio|||0000-0001-9215-5437
  • Defez Candel, Emilio|||0000-0002-3303-6371
[EN] This work gives a new formula for the forward relative error of matrix exponential Taylor approximation and proposes new bounds for it depending on the matrix size and the Taylor approximation order, providing a new efficient scaling and squaring Taylor algorithm for the matrix exponential. A Matlab version of the new algorithm is provided and compared with Pad´e state-of-the-art algorithms obtaining higher accuracy in the majority of tests at similar or even lower cost., This work has been supported by the Programa de Apoyo a la Investigacion y el Desarrollo of the Universitat Politecnica de Valencia grant PAID-06-11-2020
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the random diffusion model in an infinite medium: A mean square approach

  • M.-C. Casabán|||0000-0002-5708-5709
  • Company Rossi, Rafael|||0000-0001-5217-1889
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
[EN] This paper deals with the construction of an analytic-numerical mean square solution of the random diffusion model in an infinite medium. The well-known Fourier transform method, which is used to solve this problem in the deterministic case, is extended to the random framework. Mean square operational rules to the Fourier transform of a stochastic process are developed and stated. The main statistical moments of the stochastic process solution are also computed. Finally, some illustrative numerical examples are included., This work has been partially supported by the Ministerio de Economia y Competitividad grant: DPI2010-20891-c0-01, and Universitat Politecnica de Valencia grant: PAID06-11-2070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rational direct synthesis methodology of very active and hydrothermally stable Cu-SAPO-34 molecular sieves for the SCR of NOx

  • Martínez Franco, Raquel
  • Franch Martí, Cristina
  • Kustov, Arkady
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
A one-pot direct synthesis of Cu-SAPO-34 has been achieved that allows more than 90% yield in the material synthesis. By this method it is easy to control the Cu-loading in the Cu-SAPO-34. It is presented that a maximum in hydrothermal stability with very high activity for NOx SCR with NH3 is obtained for an optimum Cu loading., This work has been supported by Haldor-Topsoe, Consolider Ingenio 2010-Multicat, and UPV through PAID-06-11 (no. 1952). MM acknowledges to "Subprograma Ramon y Cajal" for the contract RYC-2011-08972.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A theoretical model for including the effect of monotonic shear loading in the analysis of reinforced concrete beams

  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
This paper presents a model for the analysis of reinforced concrete beams under monotonic loading conditions, including axial, bending, and shear forces, in order to effectively capture the mechanisms of shear transfer. The proposed model, or PR model, is based upon the Timoshenko Beam Theory, with the additional inclusion of two significant elements: a parabolic-shaped variable shear strain profile where the concrete is in compression and a straight line segment bounded by the neutral axis on the one hand and by the longitudinal reinforcement in tension on the other. The profile is defined by only three parameters, which are obtained by satisfying inter-layer longitudinal equilibrium at three strategic locations. The constitutive material model for reinforced concrete follows the basic assumptions of the Modified Compression Field Theory (hereinafter MCFT ). The validity of the model is established by analyzing its results under Bresler Scordelis and Vecchio Shim experimental tests. The model is further tested through comparison with additional traditional kinematic assumptions. Despite the assumption of a simple shear strain profile, the PR model gives reasonable predictions of the load deflection response and the ultimate load capacity for the experimental tests validated. Therefore, it is suitable for analysis of shearcritical reinforced concrete beams subjected to monotonic loading conditions. However, additional validation tests are required for proving the accuracy of the proposed model. Additional developments of the formulation are still required extending it to cross sections different from the rectangular one and to general loading conditions., The authors of this work wish to thank the Universitat Politecnica de Valencia for the funding through the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Suitability Evaluation of Multipoint Simultaneous CO2 Sampling Wireless Sensors for Livestock Buildings

  • Calvet, S.|||0000-0001-6639-9892
  • Campelo Rivadulla, José Carlos|||0000-0003-0558-7683
  • Estellés, F.|||0000-0001-6774-6075
  • Perles, Angel|||0000-0002-5782-4284
  • Mercado Romero, Ricardo|||0000-0003-3316-0097
  • Serrano Martín, Juan José
[EN] The environment in livestock buildings must be controlled to ensure the health and welfare of both workers and animals, as well as to restrict the emission of pollutants to the atmosphere. Among the pollutants generated inside these premises, carbon dioxide (CO2) is of great interest in terms of animal welfare and ventilation control. The use of inexpensive sensors means that complete systems can be designed with a number of sensors located around the building. This paper describes a study of the suitability of multipoint simultaneous CO2 sensors operating in a wireless sensor network, which was found to operate satisfactorily under laboratory conditions and was found to be the best alternative for these applications. The sensors showed a highly linear response to CO2 concentrations, ranging from 500 to 5000 ppm. However, individual sensor response was found to differ, which made it necessary to calibrate each one separately. Sensor precision ranged between 80 and 110 ppm CO2, and sensor response to register a 95% change in concentration was estimated at around 5 min. These features mean this type of sensor network can be used to monitor animal welfare and also for environmental control in poorly ventilated livestock premises. According to the tests conducted in this study, a temporal drift may occur and therefore a regular calibration of sensors would be needed., This project was supported by the Vicerrectorado de Investigacion of the UPV (Programa de Apoyo a la Investigacion y Desarrollo, PAID-06-11 Program, Project No. 2843) and the Spanish Government under Projects CTM2011-29691-C02-01 and TIN2011-28435-C03-0. The translation of this paper was funded by the Universitat Politecnica de Valencia, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Framework for Modelling the Decision: View of the Supply Chains Collaborative Planning Process

  • Pérez Perales, David|||0000-0001-5149-3835
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Lario Esteban, Francisco Cruz
  • Hernández Hormazábal, Jorge Esteban
[EN] In the supply chains operations planning context, and from a research viewpoint, it has been mainly assumed that different supply chain members make decisions in a centralised manner (one decision centre). However, reality shows that this is not the most usual situation, rather distributed supply chain decision making is. This paper proposes a framework to support modelling the decisional view of collaborative planning from a decision-making process perspective for both centralised and distributed situations. Along these lines, the framework assumes that the supply chain may be composed of one or several decision centres which aim to support every supply chain planning operation. Therefore, the main framework contributions are: consideration of decisions jointly with physical, organisation and information views; the spatial and temporal integration among the different supply chain decision centres; the definition of the macro level for “conceptually” modelling the collaborative planning process and the micro level for developing analytical models in all the decisional activities identified in the supply chains operations planning process. Finally, a brief overview of a real case application is also described., This work is derived from the authors’ participation in two research projects. The first one was funded by the spanish ministry of science and technology, entitled “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos (PERMACASI)” Ref. DPI 2008-06788-C02-01. The second one was funded by the spanish ministry of economy and competitiveness (Ref. DPI2011-23597) and the universitat politècnica de València (Ref. PAID06-11/1840), entitled “Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity” (PLANGES-FHP). We also mention the aid obtained from the universitat politècnica de València for the visiting stays made by academic and research staff in prestigious european research groups/centres, in this case the ULMS (university of Liverpool management school) as part of its “research and development support programme” (PAID-00-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diversity and relationships in key traits for functional and apparent quality in a collection of eggplant: fruit phenolics content, antioxidant activity, polyphenol oxidase activity, and browning

  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • López-Gresa, María Pilar|||0000-0001-9251-0160
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Herraiz García, Francisco Javier|||0000-0001-8513-5972
  • Belles Albert, José Mª|||0000-0003-0362-9616
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Torres Vidal, Cristina
  • Hurtado Ricart, María
  • Andújar Pérez, Isabel
Eggplant (Solanum melongena) varieties with increased levels of phenolics in the fruit present enhanced functional quality, but may display greater fruit flesh browning. We evaluated 18 eggplant accessions for fruit total phenolics content, chlorogenic acid content, DPPH scavenging activity, polyphenol oxidase (PPO) activity, liquid extract browning, and fruit flesh browning. For all the traits we found a high diversity, with differences among accessions of up to 3.36-fold for fruit flesh browning. Variation in total content in phenolics and in chlorogenic acid content accounted only for 18.9% and 6.0% in the variation in fruit flesh browning, and PPO activity was not significantly correlated with fruit flesh browning. Liquid extract browning was highly correlated with chlorogenic acid content (r = 0.852). Principal components analysis (PCA) identified four groups of accessions with different profiles for the traits studied. Results suggest that it is possible to develop new eggplant varieties with improved functional and apparent quality., This project has been funded by Universitat Politecnica de Valencia through the grants SP20120681 and PAID-06-11 Nr. 2082, and by Ministerio de Economia y Competitividad Grant AGL2012-34213 (jointly funded by FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and vibrational study of cubic Sb2O3 under high pressure

  • Pereira, A. L. J.
  • Gracia, L.
  • Santamaría-Pérez, D.
  • Errandonea, D.
  • Nalin, M.
  • Beltrán, A.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We report an experimental and theoretical study of antimony oxide (Sb 2O 3) in its cubic phase (senarmontite) under high pressure. X-ray diffraction and Raman scattering measurements up to 18 and 25 GPa, respectively, have been complemented with ab initio total-energy and lattice-dynamics calculations. X-ray diffraction measurements do not provide evidence of a space-group symmetry change in senarmontite up to 18 GPa. However, Raman scattering measurements evidence changes in the pressure coefficients of the Raman mode frequencies at 3.5 and 10 GPa, respectively. The behavior of the Raman modes with increasing pressure up to 25 GPa is fully reproduced by the lattice-dynamics calculations in cubic Sb 2O 3. Therefore, the combined analysis of both experiments and lattice-dynamics calculations suggest the occurrence of two isostructural phase transformations at 3.5 and 10 GPa, respectively. Total-energy calculations show that the isostructural phase transformations occur through local atomic displacements in which senarmontite loses its molecular character to become a three-dimensional solid. In addition, our calculations provide evidence that cubic senarmontite cannot undergo a phase transition to orthorhombic valentinite at high pressure, and that a phase transition to a ß-Bi 2O 3-type structure is possible above 25 GPa. © 2012 American Physical Society., Financial support from the Spanish Consolider Ingenio 2010 Program (Project No. CDS2007-00045) is acknowledged. The work was also supported by Spanish MICCIN under Projects No. CTQ2009-14596-C02-01 and No. MAT2010-21270-C04-01/04 as well as from Comunidad de Madrid and European Social Fund, S2009/PPQ-1551 4161893 (QUIMAPRES) and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. Spanish Fundacio Bancaixa Project No. P1-1A2009-08 and Brazilian Capes/Fundacion Carolina (BEX 3939/10-3) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the influence of geometric, modeling and environmental parameters on the fire response of steel bridges subjected to realistic fire scenarios

  • Peris-Sayol, Guillem
  • Paya-Zaforteza, Ignacio
  • Alós Moya, José
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
This paper studies bridge fires by using numerical models to analyze the response of a typical girder bridge to tanker truck fires. It explains the influence of fire position, bridge configuration (vertical clearance, number of spans) and wind speed on the bridge response. Results show that the most damage is caused by tanker fires close to the abutments in single span bridges with minimum vertical clearance and under windless conditions. The paper provides new insights into modeling techniques and proves that bridge response can be predicted by FE models of the most exposed girder, which saves significant modeling and analysis times. (C) 2015 Elsevier Ltd. All rights reserved., Funding for this research was provided by the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reasignación óptima del inventario a pedidos en empresas cerámicas caracterizadas por la falta de homogeneidad en el producto (FHP), Optimal inventory reallocation to customer orders in ceramic tile companies characterized by the lack of homogeneity in the product (LHP)

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Lario Esteban, Francisco Cruz
[ES] La Falta de Homogeneidad en el Producto (FHP), se define como la carencia de la homogeneidad requerida por el cliente en los productos. La FHP aparece en empresas en las que los productos finales obtenidos no son homogéneos, dando lugar a la existencia de diferentes referencias (subtipos) de un mismo producto final. Esta falta de homogeneidad supone un problema cuando el cliente requiere ser servido a través de unidades homogéneas de un mismo producto y sus pedidos se comprometen en base cantidades planificadas, cuyas características de homogeneidad finales se desconocen en el momento de adquirir los compromisos con el cliente. Las constantes discrepancias provocadas por la FHP entre las cantidades planificadas y las realmente obtenidas y disponibles, pueden impedir servir pedidos comprometidos previamente. Para resolver este problema, se propone un modelo de programación matemática que permite reasignar el inventario en empresas caracterizadas por la FHP que fabrican contra almacén (Make to Stock: MTS) que combina varios objetivos. El modelo matemático propuesto se ha validado mediante su aplicación a un caso real de una empresa cerámica. El análisis de los resultados indica la obtención de mejoras considerables en la cantidad de pedidos completados a tiempo y en los ingresos por ventas., [EN] The lack of homogeneity in the product (LHP) is defined as the lack of uniformity required by the customer in the products. The LHP appears in companies where the final products obtained are not homogeneous, leading to the existence of different references (subtypes) of the same product. This lack of homogeneity is a problem when the client needs to be served through homogeneous units of a product and commit orders are based on planned quantities, whose final homogeneity characteristics are unknown at the time of acquiring the customer commitments. The frequent discrepancies caused by the LHP between planned homogeneous amounts and those actually obtained and available, can prevent the delivery of committed orders. To solve this problem, we propose a mathematical programming model for the reallocation of inventory in Make to Stock (MTS) ceramic tile companies characterized by the LHP that combines multiple objectives. The proposed mathematical model has been validated by its application to a real case of a ceramic company. The analysis of the obtained results indicates significant improvements in the number of orders completed on time and in sales revenue achieved., El presente trabajo se ha desarrollado parcialmente, tanto en el marco del proyecto de investigación titulado “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos” (DPI 2008-06788-C02-01), financiado por el Ministerio de Ciencia e Innovación español, como en el proyecto de investigación titulado “Métodos y modelos para la planificación y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la Falta de Homogeneidad en el Producto” (DPI2011-23597), financiado por el Ministerio de Economía y Competitividad español y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia (PAID-06-11/1840), dentro de los cuales se ha tenido oportunidad de validar el funcionamiento del modelo propuesto aplicándolo a una empresa líder en el sector cerámico.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure lattice dynamical study of bulk and nanocrystalline In2O3

  • Garcia Domene, Braulio
  • Ortiz, H. M.
  • Sans, J. A.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Achary, S. N.
  • Errandonea, D.
  • Martínez-García, D.
  • Romero, A. H.
  • Singhal, A.
  • Tyagi, A. K.
  • Gomis, O.|||0000-0001-6763-0638
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
The effect of pressure on the vibrational properties of bulk and nanocrystallinepowders of cubic bixbyite-type In2O3 has been investigated at room temperature by means of Raman spectroscopy up to 31.6 and 30¿GPa, respectively. We have been able to follow the pressure dependence of up to sixteen and seven Raman modes in bulk and nanocrystalline cubic In2O3, respectively. The experimental frequencies and pressure coefficients of the Raman-active modes of bulk cubic In2O3 at ambient pressure are in good agreement with those predicted by our theoretical ab initio calculations. Furthermore, a comparison of our experimental data with our calculations for the Raman modes in rhombohedral corundum and orthorhombic Rh2O3-II structures and with already reported Raman modes of rhombohedral corundum-type In2O3 at room pressure indicate that Raman scattering measurements provide no experimental evidence of the cubic to rhombohedral or cubic to orthorhombic phase transitions either in bulk material or in nanocrystals up to 30¿GPa. © 2012 American Institute of Physics, Research financed by the Spanish MEC under Grant No. MAT2010-21270-C04-01/03/04 and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. CONACyT Mexico under the Project J-152153-F and the Marie-Curie Intra-European Fellowship have supported AHR. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. B.G.-D. acknowledges J. Ruiz-Fuertes for enlightening suggestions. We also acknowledge the financial support from the MEC through the FPI program and Juan de la Cierva fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving initial and two-point boundary value linear random differential equations: A mean square approach

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villafuerte, L.
This paper deals with the construction of mean square real-valued solutions to both initial and boundary value problems of linear differential equations whose coefficients are assumed to be stochastic processes and, initial and boundary conditions are random variables. A key result to conduct our study is the extension of the Leibniz integral rule to the random framework taking advantage of the so-called random Fourth Calculus. Exact expressions for the main statistical functions (average and variance) associated to the solutions to both problems are also provided. Illustrative examples computing the average and standard deviation are included., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-08587, DPI2010-20891-C02-01, Universidad Politecnica de Valencia grant PAID06-11-2070 and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptación para multiples GPU de un simulador de actividad eléctrica en el corazón, Multi-GPU adaptation of a simulator of heart electric activity

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • Liberos Mascarell, Alejandro
  • Climent, Andreu M.
[EN] The simulation of the electrical activity of the heart is calculated by solving a large system of ordinary differential equations; this takes an enormous amount of computation time. In recent years graphics processing unit (GPU) are being introduced in the field of high performance computing. These powerful computing devices have attracted research groups requiring simulate the electrical activity of the heart. The research group signing this paper has developed a simulator of cardiac electrical activity that runs on a single GPU. This article describes the adaptation and modification of the simulator to run on multiple GPU. The results confirm that the technique significantly reduces the execution time compared to those obtained with a single GPU, and allows the solution of larger problems., [ES] La simulación de la actividad eléctrica del corazón se calcula mediante la resolución de un gran sistema de ecuaciones diferenciales ordinarias, que necesita una enorme cantidad de tiempo de computación. Sin embargo, en los últimos años se están introduciendo, en el ámbito de la computación de alto rendimiento, las unidades de procesamiento gráfico (GPU). Estos potentes dispositivos han atraído a grupos de investigación que requieren simular la actividad eléctrica del corazón. El grupo de investigación que firma este artículo ha desarrollado un simulador de actividad eléctrica cardíaca que se ejecuta en una sola GPU. En este artículo se describe la adaptación y modificaciones de dicho simulador para su ejecución en múltiples GPU. Los resultados confirman que la técnica empleada permite reducir sensiblemente los tiempos de ejecución respecto a los que se obtienen con una sola GPU, además de permitir afrontar problemas mucho más grandes., Este trabajo ha sido financiado por la Universitat Politècnica de València a través de su Programa de Apoyo a la Investigación y Desarrollo (PAID-06-11) y (PAID-05-12), por la Generalitat Valenciana a través de los proyectos PROMETEO/2009/013 y Ayudas para la realización de proyectos de I+D para grupos de investigación emergentes GV/2012/039, y por el Ministerio Español de Economía y Competitividad y el fondo europeo de Desarrollo Regional (FEDER) de la Comunidad Europea través del proyecto TEC2012-38142-C04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiofrequency cardiac ablation with catheters placed on opposing sides of the ventricular wall: Computer modelling comparing bipolar and unipolar modes

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
  • Koruth, Jacob
  • d&apos;Avila, Andre
Purpose: The aim of this study was to compare the efficacy of bipolar (BM) vs. unipolar (UM) mode of radiofrequency ablation (RFA) in terms of creating transmural lesions across the interventricular septum (IVS) and ventricular free wall (VFW). Materials and methods: We built computational models to study the temperature distributions and lesion dimensions created by BM and UM on IVS and VFW during RFA. Two different UM types were considered: sequential (SeUM) and simultaneous (SiUM). The effect of ventricular wall thickness, catheter misalignment, epicardial fat, and presence of air in the epicardial space were also studied. Results: Regarding IVS ablation, BM created transmural and symmetrical lesions for wall thicknesses up to 15 mm. SeUM and SiUM were not able to create transmural lesions with IVS thicknesses >= 12.5 and 15 mm, respectively. Lesions were asymmetrical only with SeUM. For VFW ablation, BM also created transmural lesions for wall thicknesses up to 15 mm. However, with SeUM and SiUM transmurality was obtained for VFW thicknesses <= 7.5 and 12.5 mm, respectively. With the three modes, VFW lesions were always asymmetrical. In the scenario with air or a fat tissue layer on the epicardial side, only SiUM was capable of creating transmural lesions. Overall, BM was superior to UM in IVS and VFW ablation when the catheters were not aligned. Conclusions: Our findings suggest that BM is more effective than UM in achieving transmurality across both ventricular sites, except in the situation of the epicardial catheter tip surrounded by air or placed over a fat tissue layer., This work received financial support from the Spanish 'Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion' (TEC2011-27133-C02-01), and from the Universitat Politecnica de Valencia (PAID-06-11 Ref. 1988). A. Gonzalez-Suarez is the recipient of a Grant VaLi+D (ACIF/2011/194) from the Generalitat Valenciana, Spain. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epidemic Random Network Simulations in a Distributed Computing Environment

  • Villanueva-Oller, J.
  • Acedo Rodríguez, Luis
  • Sánchez Sánchez, A.
  • Moraño Fernández, José Antonio|||0000-0003-4385-7277
We discuss a computational system following the paradigm of distributed computing, which will allow us to simulate the epidemic propagation in random networks with large number of nodes up to one million. This paradigm consists of a server that delivers tasks to be carried out by client computers. When the task is finished, the client sends the obtained results to the server to be stored until all tasks are finished and then ready to be analysed. Finally, we show that this technique allows us to disclose the emergence of seasonal patterns in the respiratory syncytial virus transmission dynamics which do not appear neither in smaller systems nor in continuous systems., This paper has been supported by the Grant from the Universitat Politecnica de Valencia PAID-06-11 ref: 2087 and the Grant FIS PI-10/01433. The authors would like to thank the staff of the Facultad de Administracion de Empresas of the Universidad Politecnica de Valencia, in particular Mara Angeles Herrera, Teresa Solaz, and Jose Luis Real, and the staff of the CES Felipe II of Aranjuez for their help and for letting them use free computer rooms to carry out the Sisifo computations described in this paper. They would also like to acknowledge the BOINC community for its support and the many anonymous volunteers who joined thier project and helped them obtain the results so fast.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Laguerre random differential polynomials: definition, differential and statistical properties

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Company Rossi, Rafael|||0000-0001-5217-1889
  • Villafuerte, Laura
[EN] In this paper we introduce the Laguerre polynomials as mean square solutions of random differential equations. The study is based on the construction of an infinite random power series solution which becomes a random polynomial under certain conditions to be satisfied by the single involved random coefficient, denoted by A. This approach allows us to introduce the concept of Laguerre polynomials associated to the random variable A retaining their deterministic definition when the probability mass of A is concentrated in a nonnegative integer. As a result, we provide a natural way to extend the deterministic Laguerre polynomials to the random framework. In addition, the main statistical functions of the approximate solution stochastic process obtained by truncation of the exact power series solution, which generates random Laguerre polynomials, are also given. Several illustrative examples are provided., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-05857, DPI2010-20891-C02-01, Universitat Politècnica de València grant PAID06-11-2070 and Mexican CONACYT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of an extra-large molecular sieve using proton sponges as organic structure-directing agents

  • Martínez Franco, Raquel
  • Yun, Yifeng
  • Sun, Junliang
  • Wan, Wei
  • Zou, Xiaodong
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
The synthesis of crystalline microporous materials containing large pores is in high demand by industry, especially for the use of these materials as catalysts in chemical processes involving bulky molecules. An extra-large-pore silicoaluminophosphate with 16-ring openings, ITQ-51, has been synthesized by the use of bulky aromatic proton sponges as organic structure-directing agents. Proton sponges show exceptional properties for directing extra-large zeolites because of their unusually high basicity combined with their large size and rigidity. This extra-large-pore material is stable after calcination, being one of the very few examples of hydrothermally stable molecular sieves containing extra-large pores. The structure of ITQ-51 was solved from submicrometer-sized crystals using the rotation electron diffraction method. Finally, several hypothetical zeolites related to ITQ-51 have been proposed., The authors gratefully acknowledge Dr. Alejandro Vidal-Moya for the <SUP>27</SUP>Al MQ MAS NMR experiment. The authors also acknowledge financial support from Ministerio de Economia y Competitividad of Spain (MAT2012-37160), Consolider Ingenio 2010-MULTICAT, Generalitat Valenciana through the PROMETEO program, Universitat Politecnica de Valencia through PAID-06-11 (n.1952), the Swedish Research Council (VR), the Swedish Governmental Agency for Innovation Systems (VINNOVA), and the Goran Gustafsson Foundation. M. M. also acknowledges "Subprograma Ramon y Cajal" for Contract RYC-2011-08972. The TEM used in this study was purchased from a grant by the Knut and Alice Wallenberg Foundation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure polymorphs of TbVO4: A Raman and ab initio study

  • Errandonea, D.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Panchal, V.
  • Achary, S. N.
  • Tyagi, A. K.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
Raman measurements on TbVO4 show the occurrence of three pressure-induced phase transitions. The first one, an irreversible transition from the zircon to the scheelite structure, occurs beyond 6.7 GPa. In addition, two reversible transformations take place at 26.7 and 34.4 GPa. The last transition was never reported before. The experimental findings are supported by structural and lattice-dynamics calculations that helped us to identify the post-scheelite phase as a monoclinic fergusonite structure. According to the calculations, the third transition involves a symmetry increase. An orthorhombic structure is proposed for the phase found above 34.4 GPa. The results have been compared with previous studies in TbVO4 and discussed in comparison with related compounds. The calculated equations of state are reported for the different polymorphs of TbVO4. A compressibility increase is caused by the third transition. It is associated to a bond-strength decrease, which is related to a coordination increase and a delocalization of Tb f-electrons. (C) 2013 Elsevier B.V. All rights reserved., Research supported by the Spanish MINECO (Grants No.: MAT2010-21270-C04-01/03/04), MALTA Consolider (CSD2007-00045), and Vicerrectorado de Investigacion y Desarrollo of UPV (UPV2011-0966/0914). The authors also acknowledge the computing time provided by Red Espanola de Supercomputacion and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metodología para la reingeniería basada en el modelado de procesos de negocio, Methodology for reengineering based on business process modeling

  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • JEANPIERRE, FREDERIC
[EN] Methodologies to improve processes help to find ways to improve industrial activity, reducing ineffi ciencies and improving the value perceived by the customer. One of the most widely used improvement methodologies to improve processes is the Business Process Reengineering. Yet, despite its high diffusion, many organizations complain about the low returns they have achieved with it and many experts stress its risks or criticize. Other methodologies surveyed are unwieldy and have problems such as long periods of implementation, or the high effort, knowledge and training required for use. Therefore, the objective of this paper is to propose a methodology for process improvement simple and effective, by which is possible to identify areas of process improvement from its modeling. The result is an agile and effective methodology that consists of seven stages by which it is possible to identify both possible improvements in process and improvements that are not technically feasible. All this with low training requirements and low cost. The main contributions of the proposed methodology are, therefore, its simplicity, ease of use and communication, its graphic aspect and its fl exibility to adapt to different companies, sectors or types of processes, [ES] Las metodologías para la mejora de procesos ayudan a encontrar formas de mejorar la actividad industrial, reduciendo ineficiencias y mejorando el valor percibido por el cliente. Una de las metodologías más utilizadas para la mejora de procesos es la Reingeniería de Procesos de Negocio, aunque, a pesar de su alta difusión, muchas organizaciones se quejan de la poca rentabilidad que han alcanzado con ella y muchos expertos subrayan sus riesgos o la critican. Otras metodologías consultadas son poco manejables y presentan problemas como: largos periodos de implementación o el elevado esfuerzo, conocimientos y formación requeridos para su utilización. Por ello, el objetivo del presente trabajo es proponer una metodología para la mejora de procesos sencilla y efectiva, mediante la cual se puedan identificar los aspectos de mejora de un proceso a partir de su modelado. El resultado obtenido es una metodología ágil y eficaz, que consta de siete fases mediante la cuales es posible identificar tanto posibles mejoras en el proceso como mejoras que no son viables técnicamente. Todo ello con bajos requerimientos de formación y con bajo coste. Las principales aportaciones de la metodología propuesta son, por tanto, su simplicidad, su facilidad de uso y de comunicación, su carácter gráfico y su flexibilidad para adaptarse a distintas empresas, sectores o tipos de procesos., El presente trabajo ha sido parcialmente desarrollado en el marco del Proyecto titulado “Métodos y modelos para la planificación de operaciones y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la falta de homogeneidad en el producto”, subvencionado por el Ministerio Español de Economía y Competitividad (MICINN), con referencia DPI2011-23597 y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia, con referencia PAID06-11/1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using GPUs for the exact alignment of short-read genetic sequences by means of the Burrows-Wheeler transform

  • Salavert Torres, José|||0000-0001-6309-4401
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
  • Tomás Domínguez, Andrés Enrique
  • Hernández García, Vicente
  • Medina Castelló, Ignacio
  • Tárraga Giménez, Joaquín
  • Dopazo Blazquez, Joaquin
General Purpose Graphic Processing Units (GPGPUs) constitute an inexpensive resource for computing-intensive applications that could exploit an intrinsic fine-grain parallelism. This paper presents the design and implementation in GPGPUs of an exact alignment tool for nucleotide sequences based on the Burrows-Wheeler Transform. We compare this algorithm with state-of-theart implementations of the same algorithm over standard CPUs, and considering the same conditions in terms of I/O. Excluding disk transfers, the implementation of the algorithm in GPUs shows a speedup larger than 12 , when compared to CPU execution. This implementation exploits the parallelism by concurrently searching different sequences on the same reference search tree, maximizing memory locality and ensuring a symmetric access to the data. The paper describes the behavior of the algorithm in GPU, showing a good scalability in the performance, only limited by the size of the GPU inner memory., The authors would like to thank the Universitat Politecnica de Valencia in the frame of the grant "High-performance tools for the alignment of genetic sequences using graphic accelerators/Herramientas de altas prestaciones para el alineamiento de secuencias geneticas mediante el uso de aceleradores graficos (GPGPUs)," research program PAID-06-11, code 2025. They also want to thank Centro de Investigacion Principe Felipe for the support in the development of the work shown in this paper. Finally, special thanks to Mathieu Dubois and the personnel of Bull I+D HPC centre in Echirolles (France) for his excellent introductory course on CUDA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Overview of Search Strategies in Distributed Environments

  • Del Val Noguera, Elena|||0000-0002-1279-3429
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Botti V.|||0000-0002-6507-2756
[EN] Distributed systems are populated by a large number of heterogeneous entities that join and leave the systems dynamically. These entities act as clients and providers and interact with each other in order to get a resource or to achieve a goal. To facilitate the collaboration between entities the system should provide mechanisms to manage the information about which entities or resources are available in the system at a certain moment, as well as how to locate them in an e cient way. However, this is not an easy task in open and dynamic environments where there are changes in the available resources and global information is not always available. In this paper, we present a comprehensive vision of search in distributed environments. This review does not only considers the approaches of the Peer-to-Peer area, but also the approaches from three more areas: Service-Oriented Environments, Multi-Agent Systems, and Complex Networks. In these areas, the search for resources, services, or entities plays a key role for the proper performance of the systems built on them. The aim of this analysis is to compare approaches from these areas taking into account the underlying system structure and the algorithms or strategies that participate in the search process., Work partially supported by the Spanish Ministry of Science and Innovation through grants TIN2009-13839-C03-01, CSD2007-0022 (CONSOLIDER-INGENIO 2010), PROMETEO 2008/051, PAID-06-11-2048, and FPU grant AP-2008-00601 awarded to E. del Val.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Reseña (Review)

Review of the mathematical functions used to model the temperature dependence of electrical and thermal conductivities of biological tissue in radiofrequency ablation

  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
Purpose: Although theoretical modelling is widely used to study different aspects of radiofrequency ablation (RFA), its utility is directly related to its realism. An important factor in this realism is the use of mathematical functions to model the temperature dependence of thermal (k) and electrical (sigma) conductivities of tissue. Our aim was to review the piecewise mathematical functions most commonly used for modelling the temperature dependence of k and sigma in RFA computational modelling. Materials and methods: We built a hepatic RFA theoretical model of a cooled electrode and compared lesion dimensions and impedance evolution with combinations of mathematical functions proposed in previous studies. We employed the thermal damage contour D63 to compute the lesion dimension contour, which corresponds to Omega = 1, Omega being local thermal damage assessed by the Arrhenius damage model. Results: The results were very similar in all cases in terms of impedance evolution and lesion size after 6 min of ablation. Although the relative differences between cases in terms of time to first roll-off (abrupt increase in impedance) were as much as 12%, the maximum relative differences in terms of the short lesion (transverse) diameter were below 3.5%. Conclusions: The findings suggest that the different methods of modelling temperature dependence of k and sigma reported in the literature do not significantly affect the computed lesion diameter., This work received financial support from the Spanish Plan Nacional de I þ D þ I del Ministerio de Ciencia e Innovacio´n, grant no. TEC2011-27133-C02-01, and from the PAID-06-11 UPV, grant ref. 1988. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards building Agreement Spaces using consensus networks

  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Palomares Chust, Alberto|||0000-0002-4583-467X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] If a set of agents tries to reach an agreement, there will be an Agreement Space that models the maximum valid space based on the individual constraints of each agent regarding the terms of the agreement. This paper presents a possible distributed solution using a consensus algorithm. This algorithm is applied to the MAS acquaintances network to build an Agreement Space, which allows us to determine whether or not an agreement can be achieved., This work is supported by CONSOLIDER-INGENIO 2010 under Grant CSD2007-00022 and TIN2012-36586-C03-01, PROMETEOII/2013/019 and PAID-06-11-2084 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films

  • Moreno Marro, Olga
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film s brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film s transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250 &#9702;C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity., The authors acknowledge the financial support provided by the Generalitat Valenciana (GV/2013/152) and Ministerio de Economia y Competividad (Projects AGL2013-42989-R) and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.