Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterisation of side chain liquid crystal copolymers containing sulfonic acid groups

  • Martinez Felipe, Alfonso
  • Lu, Zhibao
  • Henderson, Peter A.
  • Picken, Stephen J.
  • Norder, Ben
  • Imrie, Corrie T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A series of novel side chain liquid crystal copolymers, the poly[10-(4-methoxy-4'-oxy-azobenzene) decyl methacrylate]-co-poly[2-acrylamido-2-methyl-1-propanesulfonic acid]s (10-MeOAzB/AMPS-x/y) have been synthesised by free radical copolymerisation. The mol fraction of the sulfonic acid-based group, AMPS, has been varied over a broad range of composition in the copolymers, and these have been characterised using differential scanning calorimetry (DSC), polarised light microscopy (PLM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). The liquid crystal homopolymer and copolymers containing up to 0.54 mol fraction AMPS-based units, all exhibit a smectic A phase, while at higher mol fraction AMPS-based groups, liquid crystallinity is extinguished and the copolymers are amorphous. The local packing arrangements within the smectic A phase varies with composition attributed, in part, to phase separation between acid rich domains and liquid crystal regions. The dependence of the transitional properties on copolymer composition may be interpreted in terms of the packing efficiency of the mesogenic side chains and hydrogen bonding between the sulfonic acid groups, as a consequence of increasing the concentration of acid-based groups. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE 2011-28735- CO2-01 and IT-2009-0074 and the awarding of two FPI and FPU predoctoral grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic and thermal characterisation of the swelling behaviour of nafion membranes in mixtures of water and methanol

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The spectroscopic and thermal properties of swollen Nafion membranes in methanol aqueous mixtures were investigated to understand the behavior of commercial electrolytes in the presence of polar solvents. Several differences were observed in the absorption processes depending on the composition of the solvent. Deconvolution methods were applied to study specific contributions of solvents and polymer groups based on Fourier transform infrared spectroscopy and thermogravimetric analysis. The results evidence compositional effects on the interactions between solvents and Nafion. A major influence of the nonpolar domains (hydrophobic regions) in the absorption of methanol together with a reduction of the interactions with sulfonate groups was observed. Such changes are accompanied by a modification of the cluster morphology of the equilibrated membranes evaluated by differential scanning calorimetry. These findings can be useful to improve the knowledge on Nafion’s microstructure in the presence of polar solvents, The authors thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOV08-3E-013, IT2009-0074, ENE2011-28735-C02-01 and the awarding of two FPI and FPU predoctoral grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ionically conducting and photoresponsive liquid crystalline terpolymers: Towards multifunctional polymer electrolytes

  • Vanti, L.
  • Alauddin, S. Mohd
  • Zaton, D.
  • Aripin, N.F.K.
  • Giaccinti-Baschetti, M.
  • Imrie, C.T.
  • Martinez-Felipe, A.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] We have prepared a series of new ionically conducting polymer electrolytes consisting of side-chain liquid crystal terpolymers with mesogenic azobenzenes, sulfonic acid groups and methyl methacrylate. The poly[10-(4-methoxyazobenzene -4'-oxy)decyl methacrylate] -co-poly[2-acrylamido-2-methyl-1-propanesulfonic acid]-copoly [methyl methacrylate]s, 10-MeOAzB/AMPS/MMA terpolymers, were synthesised by a one-pot conventional radical polymerisation. All samples were characterised by NMR, GPC/SEC, FT-IR, POM, XRD, DSC, UV-visible spectrophotometry and EIS. The terpolymers have light responsive properties, and exhibit liquid crystallinity over a wide range of compositions. Above a certain threshold of AMPS content, the 10-MeOAzB/AMPS/MMA terpolymers exhibit ionic conductivities in the 10(-8)-10(-4)S.cm(-1) range, with signs of decoupling of ionic mobility from segmental motions of the polymer., ARG and AMF thank the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs, and the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013 and the awarding of two FPI and FPU pre-doctoral grants. AMF and NFKA would like to thank the Royal Academy of Engineering for the award of the Newton Research Collaboration Programme grant NRCP1516/4/61. AMF acknowledges the School of Engineering of the University of Aberdeen for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decompositon kinetics

  • Badia, J.D.
  • Santonja Blasco, Laura
  • Moriana Torró, Rosana
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The disposal stage of polylactide (PLA) was assessed by burying it in active soil following an international standard. Degradation in soil promotes physical and chemical changes in the polylactide properties. The characterization of the extent of degradation underwent by PLA was carried out by using Thermal Analysis techniques. In this paper, studies on the thermal stability and the thermal decomposition kinetics were performed in order to assess the degradation process of a commercial PLA submitted to an accelerated soil burial test by means of multi-linear-non-isothermal thermogravimetric analyses. Results have been correlated to changes in molecular weight, showing the same evolution as that described by the parameters of thermal stability temperatures and apparent activation energies. The decomposition reactions can be described by two competitive different mechanisms: Nucleation model (A2) and Reaction Contracting Volume model (R3). The changes in the kinetic parameters and kinetic models are in agreement with the calorimetric and dynamic mechanical thermal results, presented in the Part I of the study [1]. (C) 2010 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Ministerio de Educación y Ciencia (Spanish Government) and the European Regional Development Fund for the economical support through the Project ENE2007/67584/C03-02 and the research position granted through the FPU pre-doctoral program to J.D. Badía. The Ministerio of Ciencia e Innovación is acknowledged by L.Santonja-Blasco and Rosana Moriana for the research position by means of the FPI pre-doctoral programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid crystal polymers and ionomers for membrane applications

  • Martinez-Felipe, Alfonso
[EN] Transport phenomena through polymeric composite membranes depend on several complex factors, involving not only their chemical composition but also their microstructure. Due to the combination of mesomorphic and macromolecular behaviour, thermotropic liquid crystal polymers (LCP) may enhance the transport properties in membranes by improving parameters related to the order, orientation, connectivity and distribution of the different domains arising from phase separation. This paper provides an overview of some existing and potential applications of liquid crystals (LC) in polymeric membranes as effective structure-directing templates or as components providing a dynamic response to external stimuli. The first part is a description of the composition and phase behaviour of LCP containing ionic and ionogenic groups, the so-called liquid crystal ionomers (LCI). The second part is focused on the description of LCP and LCI used in transport applications, such as proton-conducting films in fuel cells, ionic polymer transducers and hydrogels. The paper highlights the relationships between the composition and the LC properties of the materials and their potential as membranes for ionic and solvent transport, with particular attention paid to covalently linked materials prepared by copolymerisation, due to their higher versatility and stability., The author would like to especially thank Professor Amparo Ribes-Greus, from Universitat Politecnica de Valencia, UPV, and Professor Corrie T. Imrie, from the University of Aberdeen, UoA, for their support during the discussion of this work, and also the researchers and students from the research group of Degradation and Recycling of Polymeric Materials in the Institute of Materials Technology (ITM) of UPV. Also acknowledged for their financial support are the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of two FPU and FPI pre-doctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal analysis applied to the characterization of degradation in soil of polylactide: I. Calorimetric and viscoelastic analyses

  • Santonja Blasco, Laura
  • Moriana Torró, Rosana
  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] An accelerated soil burial test has been performed on a commercial polylactide (PLA) for simulating non-controlled disposal. Degradation in soil promotes physical and chemical changes in polylactide properties, which can be characterized by Thermal Analysis techniques. Physical changes occurred in polylactide due to the degradation in soil were evaluated by correlating their calorimetric and visco-elastic properties. It is highly remarkable that each calorimetric scan offers specific and enlightening information. Degradation in soil affects the polylactide chains reorganization. A multimodal melting behavior is observed for buried PLA, degradation in soil also promotes the enlarging the lamellar thickness distribution of the population with bigger average size. Morphological changes due to degradation in soil lead to an increase in the free volume of the polylactide chains in the amorphous phase that highly affected the bulk properties. Thermal Analysis techniques provide reliable indicators of the degradation stage of polylactide induced by degradation in soil, as corroborated by molecular weight analysis. (C) 2010 Elsevier Ltd. All rights reserved., Partial funding of this work by Ministerio de Educación y Ciencia, Project ENE2007-67584-C03-02 and for a pre-doctoral grant scholarship FPU to J.D. Badía, and by the Ministerio de Ciencia e Innovación for a pre-doctoral grant scholarships FPI to L. Santonja Blasco and Rosana Moriana, is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

  • Martinez-Felipe, Alfonso
  • Badia, J.D.
  • Santonja Blasco, Laura
  • Imrie, C.T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A multi-rate non-isothermal kinetic analysis of the isotropic-melt to liquid crystalline phase transition of novel liquid crystalline ionogenic copolymers, LCIs, the 10-(4-methoxyazobenzene-4'-oxy)decyl methacrylate]-co-2-(acrylamido-2-methyl-1-propanesulfonic acid)s, 10-MeOAzB/AMPS, copolymers, has been performed by means of calorimetric experiments. An analytical methodology which includes the study of the phase transition rate parameter, the determination of the activation energies by using Kissinger and Flynn-Wall-Ozawa models, and the study of the phase transition kinetics by the use of the Avrami theory, has been applied. The formation of the mesophases from the isotropic state occurred close to thermodynamic equilibrium. The results evidence the presence of several individual processes in the formation of liquid crystalline phases from the melt and a strong dependence of phase transition rates and activation energies with acid contents. A decrease in the phase transition rate, related to a decrease in the overall change of the transition entropy, has been observed. The final inhibition of the liquid crystal (LC) behaviour is ascribed to an exponential increase in the activation energy of the phase transition, promoted by strong acid aggregation. An optimum composition of the 10-MeOAzB/AMPS copolymers to achieve the dual characteristics of LCIs (ionogenic and liquid crystalline behaviour) requires acid concentrations capable of promoting structure-forming effects on the LC phases and the evolution of phase separated morphologies., The authors would like to acknowledge the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074 and three FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. The Vice-rectorate for Research of UPV is also thanked for additional support through the PAID 05-09-4331, PAID-05-11/2806, and PAID 06-11-2037 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Crosslinked Poly(vinyl alcohol)-Based Membranes with Different Hydrolysis Degrees for Their Use as Electrolytes in Direct Methanol Fuel Cells

  • Martinez-Felipe, Alfonso
  • Moliner Estopiñán, Cristina Elia
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The effect of the degree of hydrolysis of poly(vinyl alcohol) (PVA) substrates on the preparation and properties of crosslinked membranes prepared via esterification with sulfosuccinic acid (SSA) has been studied using attenuated total reflectance-Fourier transform spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Three PVA substrates with degrees of hydrolysis of 89, 96, and 99% were crosslinked using SSA at high temperatures. FTIR spectroscopy revealed that esterification occurred in all the membranes and to some extent, prior to heat treatment. The final morphology of the membranes was dependent on both the SSA concentration and the composition of the PVA substrate. Thermogravimetric analysis showed an increase in the thermal stability of the PVA-SSA membranes with respect to their PVA substrates arising from the formation of a crosslinked structure. In addition, TGA revealed the presence of free and tightly bound water in the PVA-SSA membranes. Thermal treatment had a more pronounced effect on the properties of the PVA substrates having higher degrees of hydrolysis. The results from the swelling tests, the ionic exchange capacities (IEC) and the tests in DMFC monocells demonstrated that a balance between water and methanol selectivity and ionic conduction determines the potential of these materials to act as electrolytes in fuel cells, Contract grant sponsor: Generalitat Valenciana; contract grant number: Grisolia and Forteza 2010 and 2011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative thermal, biological and photo degradation kinetics of polylactide and effect on crystallization rates

  • Santonja Blasco, Laura
  • Alamo, R. G.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A comparison is made between available literature and present results of the three major types of polylactide (PLA) degradation giving a compiled view on the details of degradation mechanisms with relation to explicit factors affecting degradation. The temporal decrease of molar mass has been analyzed under isothermal conditions at 220 degrees C, biological and photodegradation conditions using a polylactide (PLA) with similar to 4 mol% D units. The decrease of molar mass with time during biodegradation follows a first order process (M = M(o)e(-kt)) while the molar mass of specimens tested during thermal and photodegradation follows a second order law (1/M = (1/M-o) + kt) Literature data obtained in similar degradation conditions were also adequately fitted with these equations. This allows us to conclude that the main step in the three types of degradation is a random chain excision, with some differences in the algebraic functionality. Under the degradation conditions tested, the degradation rate follows the progression thermal > photo > biological. For equivalent molar mass, the effect of degradation type on cold crystallization and melting is significant indicating that degradation cannot be explained by a solely outcome of chains breakage and molar mass reduction. This feature is especially prominent when the linear growth rates of specimens subjected to bio or photo degradation are compared. Anhydride groups that are formed during photodegradation decrease the crystallization rate compared to biodegraded specimens of equivalent molar mass. The molar mass dependence of the maximum growth rate follows a power law with exponents 1.3 for bio and 1.0 for photodegraded specimens, representative of semi-entangled systems. The temperature coefficient of the growth rate, analyzed according to secondary nucleation leads to a linear dependence for bio and photodegraded specimens, and to values of the surface free energy of crystallites that decrease from similar to 85 to 55 erg/cm(2) with decreasing molar mass. Combinations of molar mass characterization, FTIR, and thermal and crystallization rate analysis are proven useful strategies to assess and discriminate macroscopic changes of PLA structure induced by different types of degradation. This work also underlines the importance of analyzing the linear growth rates as a parameter that uncovers specific structural changes during degradation. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the USA National Science Foundation for partial funding of this work. Also acknowledged are the Spanish Ministry of Science and Innovation, Research Projects ENE2007-67584-C03-02, UPOVCE-3E-013, ENE2011-28735-C02-01, FPI predoctoral grant to L.Santonja-Blasco, and support from the Generalitat Valenciana, through the ACOMP/2011/189 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Structure Formation in Side-Chain Liquid Crystal Copolymers by Variable Temperature Fourier Transform Infrared Spectroscopy

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The formation of smectic phases in side-chain liquid crystal copolymers, SCLCPs, containing sulfonic acid-based nonmesogenic units, has been investigated using variable temperature FT-IR microscopy. Two copolymers have been characterized, namely, the poly[10-(4-methoxy-4′-oxy-azobenzene) decyl methacrylate]−copoly[2-acrylamido-2-methyl-1- propanesulfonic acid]s, the X-MeOAzB/AMPS copolymers, containing X = 0.71 and 0.56 mol fraction of mesogenic sidechains, respectively. For comparative purposes the corresponding side chain liquid crystal homopolymer, poly[10-(4-methoxy-4′- oxy-azobenzene) decyl methacrylate], MeOAzB, has also been characterized. The 0.56-MeOAzB/AMPS copolymer exhibits a bilayer smectic A phase, in which the mesogenic side chains constitute one layer with a SmA1 packing arrangement and the sulfonic acid groups another; whereas in the smectic A phase shown by the 0.71-MeOAzB/AMPS copolymer, the acid groups are located within the smectic layers giving a partially interdigated SmAd phase and reducing side chain packing efficiency. Smectic stabilization is attributed to a combination of stronger interactions involving the ester groups, as reflected in changes to the C O stretching band at ν ∼ 1730 cm−1 , and hydrogen bonding between the amide groups within the acid-based layers, as inferred by changes to the NH stretching band at ν ∼ 3320 cm−1 . The temperature response observed for groups with different chemical environments permits the mapping of the short-range interactions between the various structural components in SCLCPs with a view to controlling the functionality of the materials., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors also thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia (GRISOLIAP/2010/057, GRISOLIAP/2012/056, GRISOLIAP/2013/A/036) and Forteza programs and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 program.