Pasar al contenido principal

DEFINICION DE CONDICIONES DE MONITORIZACION, ENCAPSULADO Y FIJACION DE SENSORES OPTICOS PARA MEDIR TEMPERATURAS Y DEFORMACIONES EN ESTRUCTURAS SOMETIDAS A ALTAS TEMPERATURAS

BIA2011-27104

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valencia bridge fire tests: Experimental study of a composite bridge under fire

  • Alós-Moya, José
  • Rinaudo, Paula
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] The consequences of bridge fires and the lack of guidelines on the evaluation of the fire resistance of bridges have triggered a lot of recent research. Most of these studies are based on numerical models and thus need validation by experimental studies. This paper aims to bridge this gap by describing a battery of open air fire tests carried out under an experimental bridge at the Universitet Politecnica de Valencia in Valencia, Spain. The bridge, with a 6 m span and a composite deck with two steel I-girders supporting an RC slab, was submitted to four different fire scenarios similar to those of real bridge fires, although smaller in magnitude. Results show that: (a) maximum gas temperatures are reached in the region between the I-girders, (b) as gas and steel temperatures vary significantly along the longitudinal axis of the bridge, it is unrealistic to assume a longitudinally uniform gas or girder temperature (c) temperatures in the bottom flange and the web of the I-girders are very similar and significantly higher than top web temperatures, and (d) the magnitude of the fire load and its position are key factors in the bridge response. This study is of major importance as it enables the validation of the numerical models used in bridge fire engineering and is a crucial step towards the development of a performance-based approach for the design of bridges against fires. The information given will also be useful to those interested in carrying out open air experiinental bridge fire tests. (C) 2017 Elsevier Ltd. All rights reserved., Funding for this research was provided by the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104). The authors are grateful to the Infrastructure and Safety departments of the Universitat Politecnica de Valencia and the City of Valencia Fire Department (Cuerpo de Bomberos de Valencia), which provided crucial support in conducting the tests. Finally, the authors would like to thank Dr. Luke Bisby from the University of Edinburgh, and Dr. Juan Hidalgo and Dr. Cristian Maluk from the University of Queensland for their advice and support during the early stages of planning the fire tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving tunnel resilience against fires: A new methodology based on temperature monitoring

  • Rinaudo, Paula
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
Monitoring temperatures during tunnel fires is of major importance for both the firefighters extinguishing the fire, and the engineers in charge of the subsequent repair work. However, current methods of assessing fire damage have limitations when applied to tunnels and only provide estimates of the maximum fire temperatures at specific locations of the tunnel. This is not a desirable situation, as the temperature time curves associated with the fire event should be available for use in assessing the residual strength of the tunnel structure. This is the key parameter in defining repair work and the length of time the tunnel will need to be closed and thus the socio-economic cost of the tunnel fire. In addition, real-time recording of the temperature time curves would provide valuable information to the firefighters engaged in extinguishing the fire. This paper presents a new general methodology for the optimal placement of sensors in a tunnel to obtain the temperature evolution at any point along its lining during a fire. The methodology was applied to the Virgolo Tunnel in Italy, in which 100 potential high-temperature sensor configurations were tested and a set of optimal sensor configurations was proposed. The results of the analysis show that: (a) the proper location of the sensors is crucial; (b) it is possible to define a set of sensor configurations that minimize the cost of the monitoring system and maximize the accuracy of the estimated temperatures; (c) it is important to place at least three high-temperature sensors in each monitored cross section (at the crown and symmetrically on the haunches/side walls). The proposed methodology improves tunnel resilience against fires, as it enables safer infrastructure and a faster and more economic recovery of the tunnel after a fire event, This work has been possible thanks to the financial support of the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104). Funding for this research was provided to Paula Rinaudo by the European Commission (Project Erasmus Mundus Action 2 ARCOIRIS). The authors are also grateful to Eduardo Cassiraga from the Universitat Politecnica de Valencia and to Eduardo Loma Ossorio for all the support provided.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fire hazard in bridges: Review, assessment and repair strategies

  • Garlock, M.E.M.
  • Paya-Zaforteza, I.
  • Kodur, Venkatesh
  • Gu, Li
[EN] This paper presents an overview of fire hazard in bridges. A detailed review of actual fire incidents, case studies related to fire hazards, and post-fire assessment and repair strategies in bridges is presented and summarized. In doing so, this review points to the importance of fire hazard in bridges, aids practicing engineers with practical tools for developing strategies for repairing fire damage in bridges and identifies areas where further research is needed. © 2011 Elsevier Ltd., The research presented in this paper is co-sponsored by Michigan State University (through Strategic Partnership Grant Award No. SPG-71-1452), the Spanish Ministry of Education (postdoctoral fellowship awarded to Mr. Paya-Zaforteza - Grant No. EX-2008-0669- and research project BIA 2011-27104), and the National Science Foundation (NSF) under Grant Nos. CMMI-1068252 and CMMI-1068621 awarded to Princeton University and Michigan State University. All opinions, findings, and conclusions expressed in this paper are of the authors' only and do not necessarily reflect the policies and views of Michigan State University, or the Spanish Ministry of Education. The authors also thank Dr. Khaled Mahmoud for his valuable contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valencia bridge fire tests: Validation of simplified and advanced numerical approaches to model bridge fire scenarios

  • Alós-Moya, José
  • Loma-Ossorio, E.
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] Bridge fires are a major concern and the subject of many studies that use numerical models. However, experimental studies are still required to test the validity of these numerical models and improve their accuracy. This paper uses temperature results of the Valencia bridge fire tests carried out at the Universitat Politecnica de Valencia, in Valencia (Spain) to calibrate the fire models that constitute the first step in modeling any bridge fire event. The calibration is carried out by both a simplified approach (Heskestad and Hamada's correlation) and advanced numerical models (Computational Fluid Dynamics models built with the Fire Dynamics Simulator -FDS- software). The Valencia bridge fire tests involved four fire scenarios under a composite bridge with Heat Release Rate (HRR) values between 361 and 1352 kW. The results show that applying Heskestad and Hamada's correlation gave good results when used within its limits of application (HRR < 0.764 MW) but did not work well beyond them, which means it would be suitable for planning reduced scale bridge fire tests but not in the analysis of real bridge fires. On the other hand, FDS provides good predictions of the temperatures and can be used to study bridge fire responses. This work is therefore an important step forward in the study of bridge fires and towards the improvement of the resilience of infrastructure networks vis-a-vis fire hazards. It also highlights the problems that can arise in fire tests in the open air, the influence of the wind being of critical importance., Funding for this research was provided by the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104). The authors are grateful to the Infrastructure and Safety departments of the Universitat Politecnica de Valencia and the City of Valencia Fire Department (Cuerpo de Bomberos de Valencia), which provided crucial support in conducting the tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of a bridge failure due to fire using computational fluid dynamics and finite element models

  • Alós Moya, José
  • Paya-Zaforteza, Ignacio
  • Garlock, Maria E.M.
  • Loma-Ossorio, Eduardo
  • Schiffner, Daniel
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
Bridge fires are a major concern because of the consequences that these kind of events have and because they are a real threat. However, bridge fire response is under researched and not covered in the codes. This paper studies the capabilities of numerical models to predict the fire response of a bridge and provides modeling guidelines useful for improving bridge design. To reach this goal, a numerical analysis of the fire of the I-65 overpass in Birmingham, Alabama, USA in 2002 is carried out. The analyses are based on computational fluid dynamics (CFD) for creating the fire model, and finite element (FE) software for obtaining the thermo-mechanical response of the bridge. The models are validated with parametric studies that consider heat release rate of the spilled fuel, discretization of the fire temperature in the transition from CFD to FE modeling, and boundary conditions. The validated model is used in a study to evaluate the influence of fire scenario (CFD versus standard fires), and live load. Results show that numerical models are able to simulate the response of the bridge and can be used as a basis for a performance-based approach for the design of bridges under fire. Additionally, it is found that applying the Eurocode standard and hydrocarbon fires along the full length of the bridge does not adequately represent a real bridge fire response for medium-long span bridges such as this case study. The study also shows that live loads essentially do not influence the response of the bridge. (C) 2014 Elsevier Ltd. All rights reserved., Funding for this research has been provided by the Spanish Ministry of Science and Innovation (research project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). Funding has also been provided to Dr. Maria Garlock by the National Science Foundation (NSF) under award number CMMI-1068252. The authors are grateful to R. King from the Federal Highway Administration of the USA, J. Black and T. Colquett from the Alabama Department of Transportation, J. Glassman from Princeton University, J.V. Aguado from Ecole Centrale de Nantes and to J. Hidalgo from the University of Edinburgh for all the information and support provided. All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and analytical evaluation of the response time of high temperature fiber optic sensors

  • Rinaudo, Paula
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Gas temperature is a key variable in many high temperature applications. Sensors for measuring gas temperatures must be selected according to many different criteria, response time being one of the most important. Response time quantifies the time that the sensor needs to react to a sudden temperature variation. When rapid temperature fluctuations are expected, as in the case of fire tests, significant instantaneous errors can occur if the sensor response time is longer than the duration of the temperature fluctuation. Despite the importance of response time, there is no general agreement on how to quantify this value in high temperature fiber optic sensors. This paper proposes a methodology to estimate the response time of fiber optic temperature sensors based on an analytical model of the heat transfer between the sensor and its surroundings. The method is validated by an experimental study. In addition, the response times of three different high temperature fiber optic sensors developed by the authors are compared with each other and with the response time of some widely used thermocouples. The results show (i) that fiber optic sensors have a significantly shorter response time than thermocouples with similar packaging, (ii) that the response time is shorter during the heating phase than the cooling phase, and (iii) highlight the importance of considering this parameter in the sensor selection process. (C) 2016 Elsevier B.V. All rights reserved., This work has been possible thanks to the financial support of the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104). Funding for this research has been provided to Paula Rinaudo by the European Commission (Erasmus Mundus Action 2 ARCOIRIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A numerical investigation on the fire response of a steel girder bridge

  • Paya-Zaforteza, I.
  • Garlock, Maria E.M.
The response of bridges subject to fire is an under researched topic despite the number of bridge failures caused by fire. Since available data shows that steel girder bridges are especially vulnerable to fire, this paper delves into their fire response by analyzing with a 3D numerical model the response of a typical bridge of 12.20 m span length. A parametric study is performed considering: (1) two possibilities for the axial restraint of the bridge deck, (2) four types of structural steel for the girders (carbon steel and stainless steel grades 1.4301, 1.4401, and 1.4462), (3) three different constitutive models for carbon steel, (4) four live loads, and (5) two alternative fire loads (the hydrocarbon fire defined by Eurocode 1 and a fire corresponding to a real fire event). Results show that restraint to deck expansion coming from an adjacent span or abutment should be considered in the numerical model. In addition, times to collapse are very small when the bridge girders are built with carbon steel (between 8.5 and 18 min) but they can almost double if stainless steel is used for the girders. Therefore, stainless steel is a material to consider for steel girder bridges in a high fire risk situation, especially if the bridge is located in a corrosive environment and its aesthetics deserves special attention. The methodology developed in this paper and the results obtained are useful for researchers and practitioners interested in developing and applying a performance-based approach for the design of bridges against fire. © 2012 Elsevier Ltd. All rights reserved., Funding for this research has been provided to Dr. Paya-Zaforteza by the Spanish Ministry of Education (contract number EX-2008-0669 of the Program for Postdoctoral Stays), the Spanish Ministry of Economy and Competitiveness (research project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). Funding has also been provided to Dr. Maria Garlock by the National Science Foundation (NSF) under award number CMMI-1068252. All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The San Nicolas Church in Gandia (Spain) or how Eduardo Torroja devised a new, innovative and sustainable structural system for long-span roofs

  • Núñez Collado, Gala
  • Garzón Roca, Julio
  • Paya-Zaforteza, I.
  • Adam, Jose M|||0000-0002-9205-8458
This paper analyzes the structural behavior and the context of the roof designed by the Spanish engineer Eduardo Torroja for the San Nicolas Church in Gandia (Spain). The roof is an unknown, unique, elegant and sustainable thin-walled structural system made of two deep concrete beams spanning 29 m. The structure was possible because of Torroja's exceptional conceptual design, which used prestressing in a new way to counterbalance the biaxial bending and torsion problems caused by using deep beams with an open asymmetric cross section in long-span structures. The paper explains in detail the conceptual design of the roof as well as the results of a complete finite element modeling of the structure carried out by the authors, which provides a better understanding of this unknown masterpiece of Structural Art. The paper describes its original way of overcoming the major drawbacks of using open cross-section beams in long-span structural systems and points out the capabilities of simplified analysis methods to develop conceptual designs for complex structures. The authors believe the study provides inspiration for future designs and will help to give value and preserve a masterpiece of concrete construction. (C) 2013 Elsevier Ltd. All rights reserved., Funding for this research was provided by the Spanish Ministry for Science and Innovation (Research Project BIA 2011-27104) and the Spanish Ministry of Education (Collaboration Grant awarded to G. Nunez-Collado). The authors are very grateful to the architects O. Perosanz and A. Meseguer, art historian J. Paya-Zaforteza, teacher F. Carbonell and the Archivo Torroja and its librarian, I. Garcia, for all the information and support provided. The authors also want to thank the first and present parish priests of San Nicolas Church, Father J. Minana and Father R. Sala for the invaluable information they gave and for providing full access to the church.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Eduardo Torroja&apos, s Zarzuela Racecourse grandstand: Design, construction, evolution and critical assessment from the Structural Art perspective

  • Moragues, Juan J|||0000-0001-8111-5480
  • Paya-Zaforteza, Ignacio
  • Adam, Jose M|||0000-0002-9205-8458
  • Medina, Oswaldo
The grandstands of La Zarzuela Racecourse in Madrid designed by the engineer E. Torroja and the architects C. Arniches and M. Dominguez are one of the world s most outstanding concrete constructions of the first half of the 20th century. This paper describes the design competition and the conceptual design process that led to their construction and carries out a critical assessment of the grandstands from the perspective of Structural Art. By doing so, the paper helps to develop the discipline of structural criticism, and points out lessons learned from their design and construction process which should not be forgotten at the present time, such as: (a) the importance of design competitions; (b) the fact that the pursuit of economy and efficiency can actually improve the quality and aesthetics of the design; (c) the importance of combining logical reasoning based on technical criteria with imagination to achieve excellence in structural design; and (d) the importance of estimating structural behavior by simple formulas and of learning from both existing structures and experimental models., The authors are very grateful to the engineers G. Ayuso and L. Fernandez Troyano from Carlos Fernandez Casado S.L. and C. Polo from the company Hipodromo de La Zarzuela S.A. for all the information and support provided. The authors also want to thank the Archivo Torroja and its former librarian, I. Garcia, for providing full access to the funds of the archive to develop this research. Funding for this research was provided by the Spanish Ministry for Science and Innovation (Research Project BIA 2011-27104).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-linear analysis of Eduardo Torroja s Frontón de Recoletos roof using a discrete reinforcement approach

  • Cabello, Adrián
  • Paya-Zaforteza, Ignacio
  • Adam, Jose M|||0000-0002-9205-8458
Eduardo Torroja was a Spanish engineer and a famous figure in structural design. His vast production of technically demanding work includes thin reinforced concrete shells, daring structures that meet efficiency requirements through their thinness. One of his most remarkable works is the Fronton Recoletos, which is described in an extensive bibliography, enabling us to approach this milestone of structural engineering again with modern computational tools. Although thin shells have mainly been designed under the elasticity hypothesis, nonlinear analysis also deserves to be considered, since current computer processing speeds make this possible. The present work carries out a complete non-linear analysis of the roof of Torroja's Fronton de Recoletos and can be considered as the continuation of the linear-elastic analysis previously carried out by Lozano-Galant and Paya-Zaforteza (2011). The key aspects of the investigation presented in this paper are the use of discrete reinforcement instead of the more common smeared approximation to modeling the roof reinforcement and the accurate definition of concrete through a robust constitutive equation, the Multi-crack model proposed by Jefferson (1999) for which FE software was used. The results have been checked against both the historical documentation in the Torroja Archive and the recent studies using linear models by Lozano-Galant and Paya-Zaforteza (2011). As it turns out, the relevance of geometric nonlinearities, material nonlinearities and stability behavior should not be neglected. (C) 2014 Elsevier Ltd. All rights reserved., Funding for this research was provided by the Spanish Ministry for Science and Innovation (Research Project BIA 2011-27,104). The authors are grateful to J. A. Lozano Galant, whose work is the starting point of the present research. The authors also want to thank the Archivo Torroja and their librarians Maria Isabel Sanchez de Rojas and Virtudes Azorin Albinana, for their kind cooperation and for the drawings provided. Finally, the authors want to thank Prof. Dr. Ester Gimenez Carbo for her help on the definition of concrete properties.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the influence of geometric, modeling and environmental parameters on the fire response of steel bridges subjected to realistic fire scenarios

  • Peris-Sayol, Guillem
  • Paya-Zaforteza, Ignacio
  • Alós Moya, José
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
This paper studies bridge fires by using numerical models to analyze the response of a typical girder bridge to tanker truck fires. It explains the influence of fire position, bridge configuration (vertical clearance, number of spans) and wind speed on the bridge response. Results show that the most damage is caused by tanker fires close to the abutments in single span bridges with minimum vertical clearance and under windless conditions. The paper provides new insights into modeling techniques and proves that bridge response can be predicted by FE models of the most exposed girder, which saves significant modeling and analysis times. (C) 2015 Elsevier Ltd. All rights reserved., Funding for this research was provided by the Spanish Ministry of Science and Innovation (Research Project BIA 2011-27104) and the Universitat Politecnica de Valencia (Research and Development Support Program PAID-06-11). All opinions expressed in this paper are the authors' and do not necessarily reflect the policies and views of the sponsors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio paramétrico de la respuesta termo-estructural de un puente metálico multijácena sometido a incendios reales, A parametric study on the thermo-mechanical response of a multi-girder steel bridge submitted to real fires

  • Peris Sayol, Guillem
  • Alós Moya, J.
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] Bridge fire response is a barely studied topic not covered in current design codes despite the frequency and consequences of this kind of events. Within this context, this paper analyzes the response of a multi-girder steel bridge in real fires caused by a tanker. To reach this goal, fire models of the bridge and its surroundings are done using Computer Fluid Dynamics (CFD) techniques, and then an uncoupled thermo-mechanical analysis of the most fire affected bridge girders is carried out. The study analyzes modeling features as well as the influence of the position of the tanker and the existence of gas spills. Results are interesting for both researchers and engineers and show (a) the importance of considering real fires and not simplified models, and (b) the need to develop a performance based approach specific to bridge fire design., [ES] La respuesta de los puentes frente al fuego es un tema poco estudiado y ausente de las normativas actuales a pesar de la frecuencia y consecuencias de los incendios en puentes. Por ello, este artículo analiza la respuesta de un puente metálico multijácena ante incendios reales provocados por un camión cisterna. Para ello se realizan primeramente modelos de incendio del puente y su entorno con técnicas de Dinámica de Fluidos Computacional y luego análisis termo-estructurales no lineales de las vigas más afectadas por el fuego. El estudio analiza aspectos de modelización numérica y la influencia de la posición del camión y la existencia de derrames de combustible. Los resultados son de interés para ingenieros e investigadores y muestran (a) la importancia de considerar condiciones reales de incendio y no modelos simplificados y (b) la necesidad de desarrollar herramientas específicas para el proyecto de puentes frente al fuego., Este trabajo ha sido posible gracias a la financiación prestada por el Ministerio de Ciencia e Innovación (proyecto BIA 2011-27104 del Plan Nacional de I+D+i) y por la Universitat Politècnica de València (Programa de Apoyo a la I+D PAID06-11). Los autores desaean agradecer la colaboración en los modelos de fuego prestada por D. Eduardo Loma de Osorio, ingeniero del Cuerpo de Bomberos de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical analysis of a hybrid FBG long gauge sensor for structural health monitoring

  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
This paper presents a new long gauge sensor for structural health monitoring based on the use of Fiber Bragg gratings. The proposed sensor has the advantage over existing sensors that it does not require prestressing of the optical fiber. The development consisted of numerical studies complemented by experimental tests to analyze: (1) the strain transfer between the sensor and the host structure; (2) the in!uence of sensor axial stiffness on the structural behavior of the host structure; (3) the in!uence of the mechanical properties of the adhesive used to fix the sensor and (4) the failure modes of the sensor (buckling and shear stress of sensor anchors)., This work was made possible by the support from the Universitat Politecnica de Valencia, the Spanish Ministry for Science and Innovation (Research Project BIA2011-27104) and the Spanish Ministry of Public Works (Project Sopromac P41/08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New fiber optic sensor for monitoring temperatures in concrete structures during fires

  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Monitoring temperatures in structures during fires provides valuable information to 1) the firemen engaged in extinguishing it, 2) those who assess its security, and 3) the organizations who have to decide on its possible repair, renovation or demolition. Developing sensors able to measure extremely high temperatures in actual blaze conditions is therefore a fundamental requirement. This paper proposes a new fiber optic sensor based on Regenerated Fiber Bragg Gratings specially designed to be embedded in concrete structures to monitor temperatures during fire events. A practical test was carried out on a 5.8m long beam subjected to the ISO-834 fire curve for 77 minutes under the typical loads borne by beams in conventional structures. Nine optical sensors were installed at the mid-span section of the beam and were submitted directly to flames and high temperature gradients (of the order of 200ºC/min) that make them measure maximum temperatures of 953º C. The temperatures recorded by the new sensors were compared with those obtained from electrical sensors (thermocouples) and a numerical model, with which they showed a good fit, except in those places in which concrete spalling caused distortions in the results and/or failure of the sensors. The paper thus demonstrates the viability of optical technologies in monitoring reinforced concrete during fires and analyzes sensor behavior to point out areas in which additional research is required., This work was made possible by the support from the Universitat Politecnica de Valencia, the Spanish Ministry for Science and Innovation (Research Project BIA2011-27104 and TEC2011-29120-C05-05) and the Spanish Ministry of Public Works (Project Sopromac P41/08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of new regenerated fiber Bragg grating high-temperature sensors in an ISO 834 fire test

  • Rinaudo, Paula
  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Temperature, one of the most important parameters in building fires, is now mostly measured with high-temperature thermocouples, which have the typical drawbacks of electric sensors, such as their sensitivity to electrical and magnetic interference. Fiber optic sensors are an alternative to electric sensors and offer many advantages, although their use in fire engineering is somewhat limited at the present time. This paper presents a set of new fiber optic sensors for measuring high temperatures, based on Regenerated Fiber Bragg Gratings (RFBGs). The sensors were placed near the surface of two concrete specimens and then tested under ISO 834 fire curve conditions for one hour. We consider this an important step forward in the application of high-temperature fiber optic sensors in fire engineering, as the sensors were subjected to direct flames and temperature increments of the order of 200 degrees C/min, similar to those in a real fire. The RFBG sensors measured maximum gas temperatures of circa 970 degrees C, in good agreement with those provided by thermocouples in the same position. The gas temperature measurements of the FOSs were also compared with the adiabatic temperatures measured by plate thermometers and concrete specimens surface temperatures calculated with numerical heat transfer models. (C) 2014 Elsevier Ltd. All rights reserved., This work has been possible thanks to the financial support of the Spanish Ministry of Science and Innovation (Research Projects BIA 2011-27104 and TEC2011-29120-C05-05). Funding for this research was provided to Paula Rinaudo by the European Commission (Erasmus Mundus Project Action 2 ARCOIRIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detailed Analysis of the Causes of Bridge Fires and Their Associated Damage Levels

  • Peris-Sayol, Guillem
  • Alós-Moya, José
  • Paya-Zaforteza, Ignacio
  • Balasch Parisi, Sebastià|||0000-0001-6632-2166
[EN] Although bridge fires pose a real threat, the topic is not covered in current design codes. This paper analyses information related to 154 cases of bridge fires, proposes classifying the damage levels suffered by a bridge during a fire, and establishes the main factors involved in bridge fire damage, which include: type of vehicle involved in the fire and its position, vertical clearance of the bridge, and the type of material composing the deck. The analysis shows that wooden bridges are the most vulnerable and that a tanker carrying gasoline under the bridge, or that is on the bridge and causes a serious spill under the bridge, is responsible for most of the fires that result in the collapse or demolition of the bridge., The research presented in this paper is sponsored by the Spanish Ministry of Education (Research Project BIA 2011-27104). The authors also thank Dr. J. Glassman for providing information for the present study and Dr. V. Yepes for his assistance. The authors are also grateful to D. Terrasa Diaz, J. Perez Armino, B. Black, and R. Campbell, who kindly gave permission to use the photos of Fig. 1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Monitorización de deformaciones y temperaturas en la estructura de un túnel artificial de alta velocidad mediante sensores ópticos puntuales, de longitud y distribuidos, High-speed railway tunnel monitoring using point, long gauge and distributed strain and temperature fiber optic sensors

  • Torres, B.
  • Payá Zaforteza, I.
  • Barrera, David
  • Alvarado, Y. A.
  • Calderón, P. A.
  • Loayssa Lara, Alayn
  • Sagüés García, Mikel
  • Zornoza Indart, Ander
  • Sales, S.
La monitorización de estructuras es una rama de la ingeniería estructural que está captando mucha atención actualmente. Las deformaciones y temperaturas son, habitualmente, los parámetros monitorizados porque son los que mejor representan el comportamiento estructural. De todos los tipos de sensores existentes, los basados en fibra óptica resultan especialmente interesantes debido a sus ventajas comparativas sobre los sensores convencionales. En este artículo se presentan los trabajos de monitorización de la estructura de un túnel artificial de Alta Velocidad construido en Mogente (España) mediante tres tipos de sensores ópticos desarrollados por los autores. Los resultados de los sensores se comparan con los proporcionados por un modelo teórico de elementos finitos. Esta comparación confirma que los sensores reproducen notablemente bien la pauta general de comportamiento de la estructura, incluso con pequeños niveles de deformación (5µε). Por último, el artículo discute el comportamiento de los sensores, sus mediciones y sus campos de aplicación., Structural Health Monitoring (SHM) is presently having a great development. Strains and temperatures are usually the key parameters to be monitored due to their relevance when explaining structural behavior. Several types of sensors are used in SHM, but fiber optic sensors are especially interesting due to their advantages with respect to conventional sensors. In this paper, the monitoring of a high-speed train tunnel recently built in Spain using three types of fiber optic sensors developed by the authors is shown. Results given by the sensors are compared to those provided by a theoretical model built using FEM. Comparison of measurements and theoretical results confirms that the sensors reproduced remarkably well the general patterns of the tunnel structural behavior, even when strains are relatively small (around 5 µε). Finally, the paper discusses the behavior of the sensors, their measurements and their field of application which is useful for researchers and practitioners., Los autores quieren agradecer a la Universitat Politècnica de València, al Ministerio de Educación por la financiación recibida a través del proyecto BIA2011-27104 y al Ministerio de Fomento por el apoyo recibido a través del Proyecto SOPROMAC (P41/08).