Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical fiber sensors embedded in concrete for measurement of temperature in a real fire test

  • Bueno Martínez, Antonio
  • Torres Górriz, Benjamín
  • Lloris, J.
  • López, M.
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
We present the results of a real fire test using optical fiber sensors embedded in concrete samples. The temperature curve used in this experiment is described in the Spanish/European standard UNE-EN 1363-1 temperature profile for normalized concrete resistance to real fire tests, reaching temperatures of more than 1000◦C inside the fire chamber and up to 600◦C inside the concrete samples. Three types of optical sensors have been embedded in concrete: 1. standard fiber Bragg gratings inscribed in photosensitive germanium-boron co-doped fiber, 2. regenerated fiber Bragg grating (RFGB) inscribed in germanium doped fiber, and 3. RFBG inscribed in germanium-boron co-doped fiber. C 2011 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.3658760], The authors gratefully acknowledge research funding by the Spanish Ministry of Science and Innovation through Project SOPROMAC P41/08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Packaged Optical Sensors Based on Regenerated Fiber Bragg Gratings for High Temperature Applications

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Finazzi, Vittoria
  • Villatoro, Joel
  • Pruneri, Valerio
We report on temperature sensors based on regenerated fiber Bragg gratings (RFBGs) for measurements up to 1100°C. The annealing process required to regenerate such gratings makes the optical fiber too delicate, thus making an adequate packaging necessary. Prior to the grating regeneration the optical fiber is protected with a ceramic tube which in turn is shielded with a thick metal casing. We have performed a thorough characterization of the thermo-optical response of both packaged and unpackaged RFBG sensors placing especial attention on possible residual hysteresis after several temperature cycling tests. The response and recovery times of packaged sensors were found to be, respectively, ~ 9 s and ~ 22 s. © 2006 IEEE., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spain, through projects TEC2007-68065-C03-01, SO-PROMAC No. P41/08, in part by the "Ramon y Cajal" Program, and in part by the European COST Action 299 FIDES. This is an expanded paper from the 4th European Workshop on Optical Fiber Sensors, Porto, Portugal, September 8-10, 2010. Date of publication March 03, 2011; date of current version November 29, 2011. The associate editor coordinating the review of this manuscript and approving it for publication was Dr. William MacPherson.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical analysis of a hybrid FBG long gauge sensor for structural health monitoring

  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
This paper presents a new long gauge sensor for structural health monitoring based on the use of Fiber Bragg gratings. The proposed sensor has the advantage over existing sensors that it does not require prestressing of the optical fiber. The development consisted of numerical studies complemented by experimental tests to analyze: (1) the strain transfer between the sensor and the host structure; (2) the in!uence of sensor axial stiffness on the structural behavior of the host structure; (3) the in!uence of the mechanical properties of the adhesive used to fix the sensor and (4) the failure modes of the sensor (buckling and shear stress of sensor anchors)., This work was made possible by the support from the Universitat Politecnica de Valencia, the Spanish Ministry for Science and Innovation (Research Project BIA2011-27104) and the Spanish Ministry of Public Works (Project Sopromac P41/08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New fiber optic sensor for monitoring temperatures in concrete structures during fires

  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Monitoring temperatures in structures during fires provides valuable information to 1) the firemen engaged in extinguishing it, 2) those who assess its security, and 3) the organizations who have to decide on its possible repair, renovation or demolition. Developing sensors able to measure extremely high temperatures in actual blaze conditions is therefore a fundamental requirement. This paper proposes a new fiber optic sensor based on Regenerated Fiber Bragg Gratings specially designed to be embedded in concrete structures to monitor temperatures during fire events. A practical test was carried out on a 5.8m long beam subjected to the ISO-834 fire curve for 77 minutes under the typical loads borne by beams in conventional structures. Nine optical sensors were installed at the mid-span section of the beam and were submitted directly to flames and high temperature gradients (of the order of 200ºC/min) that make them measure maximum temperatures of 953º C. The temperatures recorded by the new sensors were compared with those obtained from electrical sensors (thermocouples) and a numerical model, with which they showed a good fit, except in those places in which concrete spalling caused distortions in the results and/or failure of the sensors. The paper thus demonstrates the viability of optical technologies in monitoring reinforced concrete during fires and analyzes sensor behavior to point out areas in which additional research is required., This work was made possible by the support from the Universitat Politecnica de Valencia, the Spanish Ministry for Science and Innovation (Research Project BIA2011-27104 and TEC2011-29120-C05-05) and the Spanish Ministry of Public Works (Project Sopromac P41/08).