Pasar al contenido principal

APLICACIONES DE LA TECNOLOGIA NANOFOTONICA AL CAMPO DE LAS TELECOMUNICACIONES Y LOS SENSORES

TEC2011-29120-C05-05

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Figures of merit for microwave photonic phase shifters based on semiconductor optical amplifiers

  • Sancho Durá, Juan
  • Lloret Soler, Juan Antonio
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We theoretically and experimentally compare the performance of two fully tunable phase shifter structures based on semiconductor optical amplifiers (SOA) by means of several figures of merit common to microwave photonic systems. A single SOA stage followed by a tailored notch filter is compared with a cascaded implementation comprising three SOA-based phase shifter stages. Attention is focused on the assessment of the RF net gain, noise figure and nonlinear distortion. Recommendations on the performance optimization of this sort of approaches are detailed., The authors wish to acknowledge the financial support of the European Commission Seventh Framework Programme (FP7) project GOSPEL; the GVA PROMETEO 2008/092, the Plan Nacional I + D TEC2011-29120-C05-05 and Infraestructura FEDER UPVOV08-3E-008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time-frequency analysis of long fiber Bragg gratings with low reflectivity

  • Sancho Durá, Juan
  • Chin, Sanghoon
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A new technique to investigate the spatial distribution of the reflection spectrum along fabricated long weak fiber Bragg gratings (FBG) is experimentally demonstrated, together with its potential applications for distributed fiber sensing and broadband signal processing. A short pulsed coherent light signal is launched into a FBG and the signal frequency is scanned through the FBG reflection spectrum. When the pulse duration is set much shorter than the transit time through the grating a time-resolved reflected signal can be obtained for each signal frequency. It informs about the distribution of the refractive index periodic perturbation along the entire FBG length, hence the uniformity or frequency chirp information of the fabricated FBG. This technique has been implemented to demonstrate a distributed temperature sensing system with high spatial resolution and to also realize a robust all-fiber tunable delay line for broadband signals., The authors wish to acknowledge the financial support of the European Commission through the COST Action TD1001 "OFSeSa"; Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, Ministerio de Ciencia e Innovacion through the project TEC2011-29120C05-05, the Swiss National Science Foundation through project 200021-134546 and the EPFL Space Center.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MWP phase shifters integrated in PbS-SU8 waveguides

  • Hervás Peralta, Javier
  • Suárez Álvarez, Isaac
  • Perez, Joaquin
  • Rodríguez Cantó, Pedro Javier
  • Abargues, Rafael
  • Martinez-Pastor, J.P.
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We present new kind of microwave phase shifters (MPS) based on dispersion of PbS colloidal quantum dots (QDs) in commercially available photoresist SU8 after a ligand exchange process. Ridge PbS-SU8 waveguides are implemented by integration of the nanocomposite in a silicon platform. When these waveguides are pumped at wavelengths below the band-gap of the PbS QDs, a phase shift in an optically conveyed (at 1550 nm) microwave signal is produced. The strong light confinement produced in the ridge waveguides allows an improvement of the phase shift as compared to the case of planar structures. Moreover, a novel ridge bilayer waveguide composed by a PbS-SU8 nanocomposite and a SU8 passive layer is proposed to decrease the propagation losses of the pump beam and in consequence to improve the microwave phase shift up to 36.5° at 25 GHz. Experimental results are reproduced by a theoretical model based on the slow light effect produced in a semiconductor waveguide due to the coherent population oscillations. The resulting device shows potential benefits respect to the current MPS technologies since it allows a fast tunability of the phase shift and a high level of integration due to its small size., The authors would like to thank Prof. Antonio Diez (Semiconductor and Fiber Optics group from the University of Valencia) for the fabrication of the tapered fiber tip. This work was supported in part by the Spanish MCINN through the projects TEC2011-29120-C05-05 and TEC2011-29120-C05-01, the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012, the EU-NAVOLCHI (project 288869) and the SEQMUST project under R+D+i joint resources and appreciation programme from the VLC/CAMPUS International Campus of Excellence supported by the Spanish MECD. J. Hervas work is supported by the MECD FPU scholarship (FPU13/04675) and J. Perez's work is supported by Spanish MINECO Juan de la Cierva Fellowship JCI-2012-14805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time resolved emission at 1.3 micrometers of a single InAs quantum dot by using a tunable fibre Bragg grating

  • Muñoz Matutano, Guillermo
  • Rivas, David
  • Ricchiuti, Amelia Lavinia
  • Fernández Pousa, Carlos R.
  • Martínez Pastor, J.
  • Seravalli, Luca
  • Trevisi, Giovanna
  • Frigeri, Paola
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Photoluminescence and time resolved photoluminescence from single metamorphic InAs/GaAs quantum dots (QDs) emitting at 1.3 micrometers have been measured by means of a novel fibre-based characterization set-up. We demonstrate that the use of a wavelength tunable fibre Bragg grating filter increases the light collection efficiency by more than one order of magnitude as compared to a conventional grating monochromator. We identified single charged exciton and neutral biexciton transitions in the framework of a random population model. The QD recombination dynamics under pulsed excitation can be understood under the weak quantum confinement potential limit and the interaction between carriers at the wetting layer and QD states., G Munoz-Matutano appreciates valuable help from Professor Miguel Andres (University of Valencia) and thanks the Spanish Juan de la Cierva program (JCI-2011-10686). We acknowledge the support of the FEDER actions UPVOV08-3E-008 and UPVOV10-3E-492, the PROMETEO2009/74 project from Generalitat Valenciana, the Spanish projects TEC2011-29120-C05-01-02-05, the Italian FIRB Project ‘Nanotecnologie e Nanodispositivi per la Societa` dell’Informazione’ and ‘SANDiE’ Network of Excellence of EC, Contract No. NMP4-CT-2004-500101.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long Weak FBG Sensor Interrogation Using Microwave Photonics Filtering Technique

  • Lavinia Ricchiuti, Amelia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on long weak fiber Bragg gratings (FBGs) is illustrated and experimentally demonstrated. The FBG sensor is able to detect and measure the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics filters. The long weak FBGs are used as quasi-distributed sensors. Several events can be detected along the FBG device with a spatial accuracy of <1 mm using a modulator and a photodetector with a modest bandwidth of <500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and easy to reconfigure., This work was supported in part by the COST Action under Grant TD1001 through the OFSeSa Project, in part by the Infraestructura through the Federacion Espanola de Enfermedades Raras Project under Grant UPVOV08-3E-008 and Grant UPVOV10-3E-492, in part by the Spanish Ministerio de Ciencia e Innovacion under Project TEC2011-29120-C05-05, in part by the Valencia Government through the Ayuda Complementaria Project under Grant ACOMP/2013/146, in part by the Research Excellency Award Program GVA PROMETEO under Grant 2013/012, and in part by the Swiss Commission for Technology and Innovation under Project 13122.1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature Sensor Based on Colloidal Quantum Dots PMMA Nanocomposite Waveguides

  • Bueno Martínez, Antonio
  • Suárez Álvarez, Isaac
  • Abargues, Rafael
  • J. MARTÍNEZ-PASTOR
  • Sales Maicas, Salvador|||0000-0001-9457-976X
In this paper, integrated temperature sensors based on active nanocomposite planar waveguides are presented. The nanocomposites consist of cadmium selenide (CdSe) and cadmium telluride (CdTe) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) matrix. When the samples are heated in a temperature range from 25$^{circ}{rm C}$ to 50 $^{circ}{rm C}$, the waveguided photoluminescence of QDs suffers from a strong intensity decrease, which is approximately quadratic dependent on temperature. Moreover, the wavelength peak of the waveguided emission spectrum of CdTe-PMMA shows a blue shift of 0.25 ${rm nm}/^{circ}{rm C}$, whereas it remains constant in the case of CdSe-PMMA. A temperature resolution of 0.1$^{circ}{rm C}$ is obtained. QD waveguides have great potential for the development of photonic sensors because of their integration, multiplexing, and roll-to-roll fabrication capabilities., Manuscript received February 21, 2012; revised May 8, 2012; accepted July 18, 2012. Date of publication July 24, 2012; date of current version August 9, 2012. This work was supported in part by the Spanish MICINN and Generalitat Valenciana under Grant TEC-2011-06756-C03-03 and Grant PROMETEO/2009/074, the Plan Nacional I + D under Project TEC2011-29120-C05-01 and Project TEC2011-29120-C05-05, and the Infraestructura FEDER UPVOV08-3E-008. The associate editor coordinating the review of this paper and approving it for publication was Prof. E. H. Yang.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Colloidal Quantum Dots-PMMA Waveguides as Integrable Microwave Photonic Phase Shifters

  • Ricchiuti, Amelia L.
  • Suárez Álvarez, Isaac
  • Rodríguez Cantó, Pedro Javier
  • Fernandez-Pousa, Carlos R.
  • Abargues, Rafael
  • Martinez-Pastor, Juan
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel scheme for the control of microwave signals carried at optical wavelengths by use of PbS colloidal quantum dots embedded in PMMA waveguides is presented. When these structures are pumped at wavelengths where PbS has efficient absorption (980 or 1310 nm), a phase shift in a signal carried at 1550 nm is induced. Optimal conditions have been analyzed by studying the influence of the microwave signal and the waveguide structure. In a proof-of-concept experiment, a continuous phase shift up to 35° at 25 GHz has been demonstrated, with good thermal stability (<2° at 25 GHz) when the samples are heated 20 °C above room temperature. The potential benefits of the use of this active-waveguide technology in microwave photonics are due to the continuous scan of the phase delay, its high tuning speed, and its small size, which leads to the possibility of integration., This work was supported in part by the Infraestructura FEDER under Grants UPVOV08-3E-008 and FEDER UPVOV10-3E-492, in part by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic Technologies, and in part by the Spanish MCINN under Projects TEC2011-29120-C05-01, TEC2011-29120-C05-02, and TEC2011-29120-C05-05.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long fiber Bragg grating sensor interrogation using discrete-time microwave photonic filtering techniques

  • Ricchiuti, Amelia Lavinia
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A novel technique for interrogating photonic sensors based on long fiber Bragg gratings (FBGs) is presented and experimentally demonstrated, dedicated to detect the presence and the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics (MWP) filters. The long FBGs are used as quasi-distributed sensors. Several hot-spots can be detected along the FBG with a spatial accuracy under 0.5 mm using a modulator and a photodetector (PD) with a modest bandwidth of less than 1 GHz. The proposed interrogation system is intrinsically robust against environmental changes., The authors wish to acknowledge the financial support of the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the projects TEC2011-29120-C05-05 and TEC2011-29120-C05-01, the Valencia Government through the Ayuda Complementaria ACOMP/2013/146, European Commission through the COST Action TD1001 "OFSeSa" and the Swiss National Science Foundation through project 200021-134546 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012, Next generation Microwave Photonic technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature gradient sensor based on a long-fiber Bragg grating and time-frequency analysis

  • Ricchiuti, Amelia Lavinia
  • Nonaka, Koji
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A photonic sensor based on a 10-cm-long fiber Bragg grating (FBG) is presented and experimentally validated that is dedicated to detect the presence and the position of a temperature gradient. The system is based on the measurement of the central frequency distribution of the grating based on time-frequency domain analysis. A short optical pulse, having duration much shorter than the transit time along the grating, is coupled into the FBG, and the back-reflected pulse is scanned by means of an oscilloscope. A spatial resolution of 1 mm, given by half the input pulse duration, is achieved. The proposed sensor is based on a simple configuration and presents a sensing range of 10 cm, which could be further enhanced by fabricating a longer grating. (C) 2014 Optical Society of America, The authors wish to acknowledge the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the project TEC2011-29120-C05-05, the Valencian Government through the Ayuda Complementaria ACOMP/2013/146 and the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave photonics filtering technique for interrogating a very-weak fiber Bragg grating cascade sensor

  • Ricchiuti, Amelia Lavinia
  • Hervás Peralta, Javier
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A system to interrogate photonic sensors based on a very weak fiber Bragg grating cascade fiber is presented and experimentally validated and dedicated to detecting the presence and location of a spot event. The distributed sensor proposed consists of a 5-m-long fiber, containing 500 9-mm-long Bragg gratings with a grating separation of 10.21 mm. The principle of operation is based on a technique used to analyze microwave photonics filters. The detection of spot events along the sensor is demonstrated with remarkable accuracy under 1 mm, using a photodetector and a modulator with a bandwidth of only 500 MHz. The simple proposed scheme is intrinsically robust against environmental changes and is easy to reconfigure., This work was supported in part by the Infraestructura FEDER UPVOV08-3E-008, by FEDER UPVOV10-3E-492, by the Spanish MCINN through Project TEC2011-29120-C05-05, by the Valencia Government through Ayuda Complementaria ACOMP/2013/146, by the grant of the program SANTIAGO GRISOLIA, and by the Research Excellency Award Program GVA PROMETEO 2013/012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time and frequency pump-probe multiplexing to enhance the signal response of Brillouin optical time-domain analyzers

  • Soto, Marcelo A.
  • Ricchiuti, Amelia Lavinia
  • Zhang, Liang
  • Thevenaz, Luc
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
A technique to enhance the response and performance of Brillouin distributed fiber sensors is proposed and experimentally validated. The method consists in creating a multi-frequency pump pulse interacting with a matching multi-frequency continuous-wave probe. To avoid nonlinear cross-interaction between spectral lines, the method requires that the distinct pump pulse components and temporal traces reaching the photodetector are subject to wavelength-selective delaying. This way the total pump and probe powers launched into the fiber can be incrementally boosted beyond the thresholds imposed by nonlinear effects. As a consequence of the multiplied pump-probe Brillouin interactions occurring along the fiber, the sensor response can be enhanced in exact proportion to the number of spectral components. The method is experimentally validated in a 50 km-long distributed optical fiber sensor augmented to 3 pump-probe spectral pairs, demonstrating a signal-to-noise ratio enhancement of 4.8 dB., The authors would like to thank Mr. Javier Urricelqui from Universidad Publica de Navarra (Spain) for the valuable discussions and help in relation to the noise characteristics of BOTDA sensors. This work was performed in the framework and with the support of the COST Action TD1001 OFSeSa. M. A. Soto and L. Thevenaz acknowledge the support from the Swiss Commission for Technology and Innovation (Project 13122.1), and from the Swiss State Secretariat for Education, Research and Innovation (SERI) through the project COST C10.0093. UPVLC group acknowledges the support from the Spanish MICINN and the Valencia Government through the projects TEC2011-29120-C05-05 and ACOMP/2013/146, respectively. L. Zhang acknowledges the support from the China Scholarship Council during his stay at EPFL in Switzerland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultracompact electro-optic phase modulator based on III-V-on-silicon microdisk resonator

  • Lloret Soler, Juan Antonio
  • Kumar, R.
  • Morthier, Geert
  • Mechet, P.
  • Spuesens, T.
  • Van Thourhout, D.
  • Olivier, N.
  • Fedeli, J.M.
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Ramos, Francisco|||0000-0003-1514-2792
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] A novel ultracompact electro-optic phase modulator based on a single 9 ¥ìm-diameter III-V microdisk resonator heterogeneously integrated on and coupled to a nanophotonic waveguide is presented. Modulation is enabled by effective index modification through carrier injection. Proof-of-concept implementation involving binary phase shift keying modulation format is assembled. A power imbalance of ¡-0.6&#8201;&#8201;dB between both symbols and a modulation rate up to 1.8 Gbps are demonstrated without using any special driving technique., The authors gratefully acknowledge the financial support given by the European Seventh Framework Programme through the projects GOSPEL, WADIMOS, and HISTORIC; the Generalitat Valenciana through the Microwave Photonics Excellency Award programme GVA PROMETEO 2008/092; and also the Plan Nacional I+D TEC2011-29120-C05-05 and TEC2008-06145.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband microwave photonic fully tunable filter using a single heterogeneously integrated III-V/SOI-microdisk-based phase shifter

  • Lloret Soler, Juan Antonio
  • Morthier, Geert
  • Van Thourhout, D.
  • Spuesens, T.
  • Olivier, N.
  • Fedeli, J.M.
  • Ramos, Francisco|||0000-0003-1514-2792
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
A broadband microwave photonic phase shifter based on a single III-V microdisk resonator heterogeneously integrated on and coupled to a nanophotonic silicon-on-insulator waveguide is reported. The phase shift tunability is accomplished by modifying the effective index through carrier injection. A comprehensive semi-analytical model aiming at predicting its behavior is formulated and confirmed by measurements. Quasi-linear and continuously tunable 2 pi phase shifts at radiofrequencies greater than 18 GHz are experimentally demonstrated. The phase shifter performance is also evaluated when used as a key element in tunable filtering schemes. Distortion-free and wideband filtering responses with a tuning range of similar to 100% over the free spectral range are obtained. (C) 2012 Optical Society of America, The authors wish to acknowledge the technical support given by Rajesh Kumar and Pauline Mechet, as well as the financial support of the European Commission Seventh Framework Programme (FP 7) through the projects GOSPEL, WADIMOS and HISTORIC; the Generalitat Valenciana through the Microwave Photonics research Excellency award programme GVA PROMETEO 2008/092 and also the Plan Nacional I + D TEC2011-29120-C05-05 and TEC2008-06145.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A high-temperature fiber sensor using a low cost interrogation scheme

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Regenerated Fibre Bragg Gratings have the potential for high-temperature monitoring. In this paper, the inscription of Fibre Bragg Gratings (FBGs) and the later regeneration process to obtain Regenerated Fiber Bragg Gratings (RFBGs) in high-birefringence optical fiber is reported. The obtained RFBGs show two Bragg resonances corresponding to the slow and fast axis that are characterized in temperature terms. As the temperature increases the separation between the two Bragg resonances is reduced, which can be used for low cost interrogation. The proposed interrogation setup is based in the use of optical filters in order to convert the wavelength shift of each of the Bragg resonances into optical power changes. The design of the optical filters is also studied in this article. In first place, the ideal filter is calculated using a recursive method and defining the boundary conditions. This ideal filter linearizes the output of the interrogation setup but is limited by the large wavelength shift of the RFBG with temperature and the maximum attenuation. The response of modal interferometers as optical filters is also analyzed. They can be easily tuned shifting the optical spectrum. The output of the proposed interrogation scheme is simulated in these conditions improving the sensitivity., The authors wish to acknowledge the financial support of the Infraestructura FEDER UPVOV08-3E-008, FEDER UPVOV10-3E-492, the Spanish MCINN through the project TEC2011-29120-C05-05 and the Valencia Government through the Ayuda Complementaria ACOMP/2013/146. The authors also acknowledge the collaboration of Alvarez from Fibercore for providing the high birefringence optical fiber.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tunable and reconfigurable multi-tap microwave photonic filter based on dynamic Brillouin gratings in fibers

  • Sancho Durá, Juan
  • Primerov, N.
  • Chin, S.
  • Antman, Y.
  • Zadok, A
  • Thevenaz, L.
  • Sales Maicas, Salvador|||0000-0001-9457-976X
We propose and experimentally demonstrate new architectures to realize multi-tap microwave photonic filters, based on the generation of a single or multiple dynamic Brillouin gratings in polarization maintaining fibers. The spectral range and selectivity of the proposed periodic filters is extensively tunable, simply by reconfiguring the positions and the number of dynamic gratings along the fiber respectively. In this paper, we present a complete analysis of three different configurations comprising a microwave photonic filter implementation: a simple notch-type Mach-Zehnder approach with a single movable dynamic grating, a multi-tap performance based on multiple dynamic gratings and finally a stationary grating configuration based on the phase modulation of two counter-propagating optical waves by a common pseudo-random bit sequence (PRBS)., The authors wish to acknowledge the financial support of the European Community's Seventh Framework Programme (FP 7) project GOSPEL; the GVA PROMETEO 2008/092, Infraestructura FEDER UPVOV08-3E-008, the Plan Nacional I + D TEC2011-29120-C05-05, the Swiss National Science Foundation through project 200021-134546 and the EPFL Space Center, the Israeli Science Foundation (ISF), and the KAMIN program of the Chief Scientist Office, Israel Ministry of Industry, Trade and Labor.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New fiber optic sensor for monitoring temperatures in concrete structures during fires

  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
Monitoring temperatures in structures during fires provides valuable information to 1) the firemen engaged in extinguishing it, 2) those who assess its security, and 3) the organizations who have to decide on its possible repair, renovation or demolition. Developing sensors able to measure extremely high temperatures in actual blaze conditions is therefore a fundamental requirement. This paper proposes a new fiber optic sensor based on Regenerated Fiber Bragg Gratings specially designed to be embedded in concrete structures to monitor temperatures during fire events. A practical test was carried out on a 5.8m long beam subjected to the ISO-834 fire curve for 77 minutes under the typical loads borne by beams in conventional structures. Nine optical sensors were installed at the mid-span section of the beam and were submitted directly to flames and high temperature gradients (of the order of 200ºC/min) that make them measure maximum temperatures of 953º C. The temperatures recorded by the new sensors were compared with those obtained from electrical sensors (thermocouples) and a numerical model, with which they showed a good fit, except in those places in which concrete spalling caused distortions in the results and/or failure of the sensors. The paper thus demonstrates the viability of optical technologies in monitoring reinforced concrete during fires and analyzes sensor behavior to point out areas in which additional research is required., This work was made possible by the support from the Universitat Politecnica de Valencia, the Spanish Ministry for Science and Innovation (Research Project BIA2011-27104 and TEC2011-29120-C05-05) and the Spanish Ministry of Public Works (Project Sopromac P41/08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of new regenerated fiber Bragg grating high-temperature sensors in an ISO 834 fire test

  • Rinaudo, Paula
  • Torres Górriz, Benjamín
  • Paya-Zaforteza, Ignacio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Temperature, one of the most important parameters in building fires, is now mostly measured with high-temperature thermocouples, which have the typical drawbacks of electric sensors, such as their sensitivity to electrical and magnetic interference. Fiber optic sensors are an alternative to electric sensors and offer many advantages, although their use in fire engineering is somewhat limited at the present time. This paper presents a set of new fiber optic sensors for measuring high temperatures, based on Regenerated Fiber Bragg Gratings (RFBGs). The sensors were placed near the surface of two concrete specimens and then tested under ISO 834 fire curve conditions for one hour. We consider this an important step forward in the application of high-temperature fiber optic sensors in fire engineering, as the sensors were subjected to direct flames and temperature increments of the order of 200 degrees C/min, similar to those in a real fire. The RFBG sensors measured maximum gas temperatures of circa 970 degrees C, in good agreement with those provided by thermocouples in the same position. The gas temperature measurements of the FOSs were also compared with the adiabatic temperatures measured by plate thermometers and concrete specimens surface temperatures calculated with numerical heat transfer models. (C) 2014 Elsevier Ltd. All rights reserved., This work has been possible thanks to the financial support of the Spanish Ministry of Science and Innovation (Research Projects BIA 2011-27104 and TEC2011-29120-C05-05). Funding for this research was provided to Paula Rinaudo by the European Commission (Erasmus Mundus Project Action 2 ARCOIRIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quantum model of light transmission in array waveguide gratings

  • Capmany Francoy, José|||0000-0002-6460-4167
  • Mora Almerich, José|||0000-0002-2877-4118
  • P. Muñoz|||0000-0001-6026-1649
  • Fernández-Pousa, Carlos R.
We develop, to the best of our knowledge, the first model for an array waveguide grating (AWG) device subject to quantum inputs and analyze its basic transformation functionalities for single-photon states. A commercial, cyclic AWG is experimentally characterized with weak input coherent states as a means of exploring its behaviour under realistic quantum detection. In particular it is shown the existence of a cutoff value of the average photon number below which quantum crosstalk between AWG ports is negligible with respect to dark counts. These results can be useful when considering the application of AWG devices to integrated quantum photonic systems. (C)2013 Optical Society of America, The authors wish to acknowledge the financial support given by the Research Excellency Award Program GVA PROMETEO 2013/012; Proof of Concept from the Universitat Politecnica de Valencia SP20120588; Spanish Ministerio de Economia y Competitividad projects TEC2011-29120-C05-02 and -05, and TEC2010-21337 ATOMIC, and FEDER projects UPVOV08-3E-008 and UPVOV10-3E-492.