Pasar al contenido principal

SENSORIZACION AMBIENTAL SUBACUATICA PARA LA INSPECCION Y MONITORIZACION DE EXPLOTACIONES DE ACUICULTURA MARINA.

CTM2011-29691-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An ultra-low power and flexible acoustic modem design to develop energy-efficient underwater sensor networks

  • Sánchez Matías, Antonio María
  • Serrano Martín, Juan José
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
  • Perles, Angel|||0000-0002-5782-4284
This paper is focused on the description of the physical layer of a new acoustic modem called ITACA. The modem architecture includes as a major novelty an ultra-low power asynchronous wake-up system implementation for underwater acoustic transmission that is based on a low-cost off-the-shelf RFID peripheral integrated circuit. This feature enables a reduced power dissipation of 10 ¿W in stand-by mode and registers very low power values during reception and transmission. The modem also incorporates clear channel assessment (CCA) to support CSMA-based medium access control (MAC) layer protocols. The design is part of a compact platform for a long-life short/medium range underwater wireless sensor network. © 2012 by the authors; licensee MDPI, Basel, Switzerland., This work has been partially funded by projects DPI2007-66796-C03-01 (Diseno, Evaluacion e Implementacion de una Red Subacuatica de Sensores-Ministerio de Educacion y Ciencia), PET2008-0011 (Investigacion basica fundamental sobre tecnologias constitutivas de un sistema de red inalambrica de sensores y su aplicacion para el desarrollo de una plataforma de redes inalambricas de sensores-Ministerio de Ciencia e Innovacion) and CTM2011-29691-C02-01 (Sonorizacion ambiental subacuatica para la inspeccion y monitorizacion de explotaciones de acuicultura marina-Ministerio de Ciencia e Innovacion).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring pest insect traps by means of low-power image sensor technologies

  • López ., Otoniel
  • Martinez Rach, Miguel Onofre
  • Migallon ., Héctor
  • Perez Malumbres, Manuel Jose
  • Serrano Martín, Juan José
  • Bonastre Pina, Alberto Miguel|||0000-0003-3639-8420
Monitoring pest insect populations is currently a key issue in agriculture and forestry protection. At the farm level, human operators typically must perform periodical surveys of the traps disseminated through the field. This is a labor-, time- and cost-consuming activity, in particular for large plantations or large forestry areas, so it would be of great advantage to have an affordable system capable of doing this task automatically in an accurate and a more efficient way. This paper proposes an autonomous monitoring system based on a low-cost image sensor that it is able to capture and send images of the trap contents to a remote control station with the periodicity demanded by the trapping application. Our autonomous monitoring system will be able to cover large areas with very low energy consumption. This issue would be the main key point in our study; since the operational live of the overall monitoring system should be extended to months of continuous operation without any kind of maintenance (i.e., battery replacement). The images delivered by image sensors would be time-stamped and processed in the control station to get the number of individuals found at each trap. All the information would be conveniently stored at the control station, and accessible via Internet by means of available network services at control station (WiFi, WiMax, 3G/4G, etc.). © 2012 by the authors; licensee MDPI, Basel, Switzerland., This work was partially funded by Ministry of Education and Science grants CTM2011-29691-C02-01, TIN2011-28435-C03-01 and TIN2011-27543-C03-03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In line river monitoring of nitrate concentration by means of a Wireless Sensor Network with energy harvesting

  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
  • Bonastre Pina, Alberto Miguel|||0000-0003-3639-8420
  • Ors Carot, Rafael|||0000-0003-2787-4683
  • Peris Tortajada, Miguel|||0000-0003-3142-0529
Wireless Sensor Networks (WSNs) are highly promising tools in the advanced automation of chemical analysis processes. This work helps to prove how they can take advantage of this technology. Two main drawbacks have been addressed in order to test this applicability: the availability of suitable transducers and the energy supply. The development and deployment of a WSN for the continuous in-line monitoring of the content of nitrates in a real scenario (River Turia, Valencia, Eastern Spain) are then presented. In this application an ion selective electrode (ISE) transducer and an energy harvesting system based on a solar panel have been used. The proposed system has been deployed along a certain stretch of the river, its operation being studied and validated. The results obtained not only show WSN applicability to analytical chemical environments, but also highlight all the advantages offered by this novel technology, namely: easy deployment, friendly use, and the fact that the great amount of data obtained allows for new possibilities for both spatial and temporal analysis of chemical species., The authors gratefully acknowledged the financial support from the Spanish MICINN (Projects No. CTM2011-29691-C02-01 and TIN2011-28435-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Low-cost AUV based on Arduino Open Source Microcontroller Board for oceanographic research applications in a collaborative long term deployment missions and suitable for combining with an USV as autonomous automatic recharging platform

  • Busquets, Javier
  • Tudela, Dionisio
  • Pérez, Francisco
  • Busquets-Carbonell, Jesús
  • Barberá, Álvaro
  • Rodríguez, Carlos
  • García, Antonio Javier
  • Gilabert, Javier
  • Busquets Mataix, José Vicente|||0000-0003-2949-502X
The challenge of extending the autonomy in AUV deployments is one of the most important issues in oceanographic research today. The possibility of maintaining a team of AUV under deployment in a defined area of interest for a long period could provide an additional source of information [8]. All this data in combination with the measures provided by buoys and sea gliders used for slow motion and long range operations will be very valuable. A group of low cost AUV's in alternative automatic switching system navigation-charging operation, could allow a kind of continuous surveying operation. This work is the continuation of the ideas that some of the authors previously presented in the AUV 2010 conference at MBARI [8]. At this conference was proposed the great interest for researching oceanic processes on two areas near Cartagena, Spain: cape Tiñoso and the Mar Menor a shallow coastal lagoon. Both areas require a different research structure configuration because of their opposite characteristics. The Mar Menor is a shallow salty lagoon 20 miles long with 7 m of maximum depth and particular features. This lagoon seems to present a sort of oceanic behavior and can be compared with the major oceans but a minor scale. The second area considered is cape Tiñoso, a very deep area in the Mediterranean Sea where the presence of a self-break provides an interesting potential for the research of the effect of upwelling currents., This work has been partly supported by the Spanish Ministry of Education under projects number TIN2011-28435-C03-01 and CTM2011-29691-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SIVEH: numerical computing simulation of wireless energy-harvesting sensor nodes

  • Sánchez Matías, Antonio María
  • Climent, Salvador
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
  • Ors Carot, Rafael|||0000-0003-2787-4683
[EN] The paper presents a numerical energy harvesting model for sensor nodes, SIVEH (Simulator I–V for EH), based on I–V hardware tracking. I–V tracking is demonstrated to be more accurate than traditional energy modeling techniques when some of the components present different power dissipation at either different operating voltages or drawn currents. SIVEH numerical computing allows fast simulation of long periods of time—days, weeks, months or years—using real solar radiation curves. Moreover, SIVEH modeling has been enhanced with sleep time rate dynamic adjustment, while seeking energy-neutral operation. This paper presents the model description, a functional verification and a critical comparison with the classic energy approach, The authors gratefully acknowledge financial support from CICYT. ANDREA: Automated Inspection and Remote Performance of Marine Fish Farms (CTM2011-29691-C02-01); and RIDeWAM: Research on Improvement of the Dependability of WSN-based Applications by Developing a Hybrid Monitoring Platform. (TIN2011-28435-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wireless sensor networks with energy harvesting: Modeling and simulation based on a practical architecture using real radiation levels

  • Climent, Salvador
  • Sánchez Matías, Antonio María
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
  • Ors Carot, Rafael|||0000-0003-2787-4683
This paper presents a new energy-harvesting model for a network simulator that implements super-capacitor energy storage with solar energy-harvesting recharge. The model is easily extensible, and other energyharvesting systems, or different energy storages, can be further developed. Moreover, code can be conveniently reused as the implementation is entirely uncoupled from the radio and node models. Real radiation data are obtained from available online databases in order to dynamically calculate super-capacitor charge and discharge. Such novelty enables the evaluation of energy evolution on a network of sensor nodes at various physical world locations and during different seasons. The model is validated against a real and fully working prototype, and good result correlation is shown. Furthermore, various experiments using the ns-3 simulator were conducted, demonstrating the utility of the model in assisting the research and development of the deployment of everlasting wireless sensor networks., This work was supported by the CICYT (research projects CTM2011-29691-C02-01 and TIN2011-28435-C03-01) and UPV research project SP20120889.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A proposal for modeling real hardware, weather and marine conditions for underwater sensor networks

  • Climent, Salvador
  • Serrano Martín, Juan José
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Perles, Angel|||0000-0002-5782-4284
Network simulators are useful for researching protocol performance, appraising new hardware capabilities and evaluating real application scenarios. However, these tasks can only be achieved when using accurate models and real parameters that enable the extraction of trustworthy results and conclusions. This paper presents an underwater wireless sensor network ecosystem for the ns-3 simulator. This ecosystem is composed of a new energy-harvesting model and a low-cost, low-power underwater wake-up modem model that, alongside existing models, enables the performance of accurate simulations by providing real weather and marine conditions from the location where the real application is to be deployed., The authors gratefully acknowledge financial support from CICYT (research projects CTM2011-29691-C02-01, TIN2011-28435-C03-01) and UPV (research project SP20120889).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced Acoustic Wake-Up System for Underwater Sensor Networks

  • Sánchez Matías, Antonio María
  • Piqueras Gozalbes, Ignacio Rafael
  • Serrano Martín, Juan José
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
[EN] This paper presents a low-cost and low-power consumption asynchronous Wake-Up (WU) development to Underwater Wireless Sensor Networks (UWSN). An asynchronous WU offers important advantages for energyaware network polices, however it needs some specific hardware, an optimal configuration of system facilities and the interconnection with a core control unit. This proposed WU implementation has been specifically designed to be used in acoustic underwater modems, able to react to external acoustic stimuli. Both the modem and the Wake-Up system use a unique piezoelectric transducer dissipating, to our knowledge, the lowest power published until now. Moreover, the system is able to detect both simple tones and predefined bit patterns, being able to wake up a network node UWSN individually or even to different nodes at the same time., This work was supported in part by the Spanish Government: Project funds of SABINA CTM2011-29691-C02-01 (SENSORIZACIÓN AMBIENTAL SUBACUÁTICA PARA LA INSPECCIÓN Y MONITORIZACIÓN DE EXPLOTACIONES DE ACUICULTURA MARIAN) AND RIDEWAN TIN2011-28435-C03-01 (INVESTIGACIÓN EN LA MEJORA DE LA CONFIABILIDAD DE APLICACIONES BASADAS EN WSN MEDIANTE EL DESARROLLO DE UNA PLATAFORMA HIBRIDA DE MONITORIZACIÓN)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IUmote: A Framework for the Efficient Modelling, Evaluation, and Deployment of Algorithms and Hardware for Underwater Communications

  • Sánchez Matías, Antonio María
  • Serrano Martín, Juan José
  • Perles, Angel|||0000-0002-5782-4284
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
We present an approach for the modelling and simulating of the modem section of underwater sensor networks. The proposal is based on a specially designed modem architecture and the use of simulation tools and models that represent each of the communication elements: the water medium, physical transducers, electronics, and coding/decoding software. The algorithms can be simulated in the modelling environment; this framework does not require recoding and allows the combination of real and modelled elements. In physical terms, the modem engine provides a decoupled pipelined design of the processing path for the algorithms which allows users to run complex algorithms without requiring a highly demanding specific hardware. The proposal includes a methodology that has allowed us to significantly reduce the effort required in the process, from algorithm development to the effective deployment of the system. As a case study, this paper shows its application and results in the evaluation of a multipath and Doppler-shift correction algorithms., The authors gratefully acknowledge financial support from the CICYT ANDREA: Automated Inspection and Remote Performance of Marine Fish Farms (CTM2011-29691-C02-01), RIDeWAM: Research on Improvement of the Dependability of WSN based Applications by developing a hybrid monitoring platform (TIN2011-28435-C03-01), Valencian Regional Government under Research Project GV/2014/012, and Universitat Politecnica de Valencia under Research Project UPV PAID-02-12. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active low intrusion hybrid monitor for wireless sensor networks

  • Navia, Marlon
  • Serrano Martín, Juan José
  • Campelo Rivadulla, José Carlos|||0000-0003-0558-7683
  • Bonastre Pina, Alberto Miguel|||0000-0003-3639-8420
  • Ors Carot, Rafael|||0000-0003-2787-4683
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
Several systems have been proposed to monitor wireless sensor networks (WSN). These systems may be active (causing a high degree of intrusion) or passive (low observability inside the nodes). This paper presents the implementation of an active hybrid (hardware and software) monitor with low intrusion. It is based on the addition to the sensor node of a monitor node (hardware part) which, through a standard interface, is able to receive the monitoring information sent by a piece of software executed in the sensor node. The intrusion on time, code, and energy caused in the sensor nodes by the monitor is evaluated as a function of data size and the interface used. Then different interfaces, commonly available in sensor nodes, are evaluated: serial transmission (USART), serial peripheral interface (SPI), and parallel. The proposed hybrid monitor provides highly detailed information, barely disturbed by the measurement tool (interference), about the behavior of the WSN that may be used to evaluate many properties such as performance, dependability, security, etc. Monitor nodes are self-powered and may be removed after the monitoring campaign to be reused in other campaigns and/or WSNs. No other hardware-independent monitoring platforms with such low interference have been found in the literature., This research was supported by the Valencian Regional Government under Research Project GV/2014/012, the Polytechnic University of Valencia under Research Projects VLC/Campus UPV PAID-06-12, financed by the Ministerio de Educacion, Cultura y Deporte as part of the program Campus de excelencia internacional UPV SP20140730 and UPV SP20150050, and the Spanish government under projects CTM2011-29691-C02-01 and TIN2011-28435-C03-0.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Suitability Evaluation of Multipoint Simultaneous CO2 Sampling Wireless Sensors for Livestock Buildings

  • Calvet, S.|||0000-0001-6639-9892
  • Campelo Rivadulla, José Carlos|||0000-0003-0558-7683
  • Estellés, F.|||0000-0001-6774-6075
  • Perles, Angel|||0000-0002-5782-4284
  • Mercado Romero, Ricardo|||0000-0003-3316-0097
  • Serrano Martín, Juan José
[EN] The environment in livestock buildings must be controlled to ensure the health and welfare of both workers and animals, as well as to restrict the emission of pollutants to the atmosphere. Among the pollutants generated inside these premises, carbon dioxide (CO2) is of great interest in terms of animal welfare and ventilation control. The use of inexpensive sensors means that complete systems can be designed with a number of sensors located around the building. This paper describes a study of the suitability of multipoint simultaneous CO2 sensors operating in a wireless sensor network, which was found to operate satisfactorily under laboratory conditions and was found to be the best alternative for these applications. The sensors showed a highly linear response to CO2 concentrations, ranging from 500 to 5000 ppm. However, individual sensor response was found to differ, which made it necessary to calibrate each one separately. Sensor precision ranged between 80 and 110 ppm CO2, and sensor response to register a 95% change in concentration was estimated at around 5 min. These features mean this type of sensor network can be used to monitor animal welfare and also for environmental control in poorly ventilated livestock premises. According to the tests conducted in this study, a temporal drift may occur and therefore a regular calibration of sensors would be needed., This project was supported by the Vicerrectorado de Investigacion of the UPV (Programa de Apoyo a la Investigacion y Desarrollo, PAID-06-11 Program, Project No. 2843) and the Spanish Government under Projects CTM2011-29691-C02-01 and TIN2011-28435-C03-0. The translation of this paper was funded by the Universitat Politecnica de Valencia, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of a Computerised Flight Mill Device to Measure the Flight Potential of Different Insects

  • Martí-Campoy, Antonio|||0000-0002-6009-8703
  • Soto Sánchez, Antonia Isabel
  • Rodríguez-Ballester, Francisco|||0000-0002-4087-5077
  • Ávalos Masó, Juan Antonio
  • Martínez-Blay, Victoria
  • Perez Malumbres, Manuel Jose
Several insect species pose a serious threat to different plant species, sometimes becoming a pest that produces significant damage to the landscape, biodiversity, and/or the economy. This is the case of Rhynchophorus ferrugineus Olivier (Coleoptera: Dryophthoridae), Semanotus laurasii Lucas (Coleoptera: Cerambycidae), and Monochamus galloprovincialis Olivier (Coleoptera: Cerambycidae), which have become serious threats to ornamental and productive trees all over the world such as palm trees, cypresses, and pines. Knowledge about their flight potential is very important for designing and applying measures targeted to reduce the negative effects from these pests. Studying the flight capability and behaviour of some insects is difficult due to their small size and the large area wherein they can fly, so we wondered how we could obtain information about their flight capabilities in a controlled environment. The answer came with the design of flight mills. Relevant data about the flight potential of these insects may be recorded and analysed by means of a flight mill. Once an insect is attached to the flight mill, it is able to fly in a circular direction without hitting walls or objects. By adding sensors to the flight mill, it is possible to record the number of revolutions and flight time. This paper presents a full description of a computer monitored flight mill. The description covers both the mechanical and the electronic parts in detail. The mill was designed to easily adapt to the anatomy of different insects and was successfully tested with individuals from three species R. ferrugineus, S. laurasii, and M. galloprovincialis., This research was partially funded by the Foundation of the Comunidad Valencia for Agroalimentary Research, Agroalimed, within the Project: Study of the flight behaviour and chromatic attraction in Rhynchophorus ferrugineus adults (Coleoptera: Curculionidae), and CICYT projects CTM2011-29691-C02-01 and TIN2011-28435-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An interference-tolerant nitrate smart sensor for Wireless Sensor Network applications

  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
  • Bonastre Pina, Alberto Miguel|||0000-0003-3639-8420
  • Ors Carot, Rafael|||0000-0003-2787-4683
  • Peris Tortajada, Miguel|||0000-0003-3142-0529
[EN] As a major contaminant in ground water, nitrate determination is a common practice in environmental analysis, especially the continuous and simultaneous monitoring of its concentration at many different points. For this task, sensor networks are a promising tool, although they require the use of sensors with special features, such as those of Ion Selective Electrodes (ISEs). Unfortunately, their measurements are – to a greater or lesser extent – affected by the presence of other coexisting (interfering) ions. A new methodology is then proposed in this work to deal with major interferences (chloride and bicarbonate in the case of nitrate determination), in such a way that the results obtained in the measurements of the content of NO3 − with a nitrate selective electrode can be considered as virtually error-free from these interferences. For this purpose, a new sensor node has been developed; it consists of three ISEs (NO3 −, Cl−, and HCO3 −) coupled to a low-consumption, low-cost microcontroller (a small chip containing all the computer components), which receives and processes all signals coming from the electrodes. This information is suitably treated, as described in detail in this paper, to provide an accurate estimation of the true value of NO3 − concentration. The application of this methodology results in an interference-tolerant nitrate smart sensor capable of being employed within a Wireless Sensor Network in the continuous monitoring of nitrate concentration in aquifers and rivers. © 2015 Elsevier B.V. All rights reserved., The authors gratefully acknowledge the financial support from the Valencian Regional Government under Research Project GV/2014/012, Polytechnic University of Valencia (Research Project UPV PAID-06-12) and Spanish Government (Research Projects CTM2011-29691-C02-01 and TIN2011-28435-C03-0).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Acoustic Modem Featuring a Multi-Receiver and Ultra-Low Power

  • Sánchez Matías, Antonio María
  • Serrano Martín, Juan José
  • Blanc Clavero, Sara|||0000-0001-6439-2902
  • Yuste Pérez, Pedro|||0000-0002-6688-9426
  • Perles, Angel|||0000-0002-5782-4284
[EN] Wireless technology for underwater communication possesses a wide range of potential application, but it is still a relatively unexplored area in many aspects concerning modems physical design. A step towards future deployment of underwater networks is the reduction of power consumption. Therefore, asynchronous wakeup systems need to be integrated within the physical layer design while avoiding the use of additional transducers. This paper offers a practical and generic solution to adapt data reception and transmission together with asynchronous wakeup sub-systems in acoustic underwater modem architectures using a low power and low cost solution. The proposal has been implemented in a real prototype with success., The translation of this paper was funded by the Universitat Politècnica de València, Spain.The authors gratefully acknowledge financial support from the CICYT. ANDREA: Automated Inspection and Remote Performance of Marine Fish Farms (CTM2011-29691-C02-01) and RIDeWAN: Research on Improvement of the Dependability of WSN-based Applications by Developing a Hybrid Monitoring Platform. (TIN2011-28435-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the design of a bioacoustic sensor for the early detection of the red palm weevil

  • Martinez Rach, Miguel Onofre
  • Migallón, Héctor
  • López Granado, Otoniel
  • Perez Malumbres, Manuel Jose
  • Serrano Martín, Juan José
  • Martí-Campoy, Antonio|||0000-0002-6009-8703
During the last two decades Red Palm Weevil (RPW, Rynchophorus Ferrugineus) has become one of the most dangerous threats to palm trees in many parts of the World. Its early detection is difficult, since palm trees do not show visual evidence of infection until it is too late for them to recover. For this reason the development of efficient early detection mechanisms is a critical element of RPW pest management systems. One of the early detection mechanisms proposed in the literature is based on acoustic monitoring, as the activity of RPW larvae inside the palm trunk is audible for human operators under acceptable environmental noise levels (rural areas, night periods, etc.). In this work we propose the design of an autonomous bioacoustic sensor that can be installed in every palm tree under study and is able to analyze the captured audio signal during large periods of time. The results of the audio analysis would be reported wirelessly to a control station, to be subsequently processed and conveniently stored. That control station is to be accessible via the Internet. It is programmed to send warning messages when predefined alarm thresholds are reached, thereby allowing supervisors to check on-line the status and evolution of the palm tree orchards. We have developed a bioacoustic sensor prototype and performed an extensive set of experiments to measure its detection capability, achieving average detection rates over 90%., We would like to acknowledge Michel Ferry and Susi Gomez (from Estacion Phoenix at Elche, Spain) for giving us access to their large RPW sound recording corpora and offering their cooperation during the development of this work. Finally, this work has been partially funded by Spanish Ministry of Education and Science under grants CTM2011-29691-C02-01, TIN2011-28435-C03-01 and TIN2011-27543-C03-03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Underwater Sensor Networks: A New Energy Efficient and Robust Architecture

  • Climent, Salvador
  • Meratnia, Nirvana
  • Serrano Martín, Juan José
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
The specific characteristics of underwater environments introduce new challenges for networking protocols. In this paper, a specialized architecture for underwater sensor networks (UWSNs) is proposed and evaluated. Experiments are conducted in order to analyze the suitability of this protocol for the subaquatic transmission medium. Moreover, different scheduling techniques are applied to the architecture in order to study their performance. In addition, given the harsh conditions of the underwater medium, different retransmission methods are combined with the scheduling techniques. Finally, simulation results illustrate the performance achievements of the proposed protocol in end-to-end delay, packet delivery ratio and energy consumption, showing that this protocol can be very suitable for the underwater medium., The authors gratefully acknowledge financial support from the Spanish Ministry of Science and Innovation (MICINN research projects CTM2011-29691-C02-01 and TIN2011-28435-C03-01) and the European Commission under the 7th Framework Programme (grant agreement no. 258359 CLAM).