Pasar al contenido principal

ESTUDIO DE COMPRENSION DE PROCESOS DE COMBUSTION DIESEL CON BAJA FORMACION DE HOLLIN

TRA2008-06448

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of the ignition and combustion processes of a dual-fuel spray under diesel-like conditions using computational fluid dynamics (CFD) modeling

  • López, J. Javier|||0000-0002-9486-2511
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Winklinger, Johannes Franz
Recent research activities in the field of diesel engines have shown the potential to reduce pollutant emissions and improve the thermal efficiency by controlling the fuel reactivity. However, understanding the impact of blending fuels with different physical and especially chemical properties on diesel-like spray mixing and combustion processes is still a challenge. Since the experimental techniques are still far from providing detailed temporal and spatial information about local spray conditions, computational fluid dynamics (CFD) modeling tools have become the key source of information for investigating the characteristics of these dual-fuel sprays. In this frame, the present research focuses on modeling a dual-fuel spray in diesel-like conditions, comparing different gasoline and diesel blends in terms of ignition characteristics and flame structure. The results confirm the suitability of the state of the art computational CFD modeling tools for reproducing the complex phenomena associated to dual-fuel sprays. Moreover, the important benefits provided by dual-fuel blends, considering the expected reduction in pollutant emissions as a consequence of the differences observed in terms of flame structure, are confirmed., The authors thank Dr. Jose Manuel Pastor for his support during this work and for sharing his profound knowledge and experience. Support for this research was provided by the Universitat Politecnica de Valencia inside the program Programas de Apoyo a la I + D + I, Primeros proyectos de investigacion (reference PAID-06-11 2033) and by the Ministerio de Ciencia e Innovacion inside the VeLoSoot project (TRA 2008_06448), which is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comprehensive modeling study analyzing the insights of the NO NO2 conversion process in current diesel engines

  • Benajes, Jesús|||0000-0002-1653-9188
  • López, J. Javier|||0000-0002-9486-2511
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Redón Lurbe, Pau
Multiple researches have focused on reducing the NOx emissions and the greatest results have been achieved when lowering the combustion temperature by employing massive exhaust gas recirculation rates (LTC). Despite this benefit, a substantial increase in the NO2 contribution to the NOx emissions has also been observed, which is the most harmful specie and is important for the design and positioning of the after-treatment devices. To understand how NO2 behaves and how it contributes to the total NOx (NO2/NOx), not only under LTC but also for CDC conditions, a stepwise computational research study was performed with Chemkin Pro software, due to the complexity of isolating the different phenomena studied, to analyze: (1) general equilibrium conditions and (2) the influence of typical diesel engine phenomena (combustion and cooling effects) under non-equilibrium conditions. The results obtained under equilibrium state confirm the theoretical guidelines established for the NO2 formation process. When considering a combustion process (HCCI-like mode), the previous results were corroborated as well as the fact that only poor or slow combustion processes are responsible for the NO2 formation. Additionally, it reflected a cyclic process between NO and NO2, or in other words, it is suffice to just concentrate on NO to be able to predict NO2. Finally, the results yield after analyzing some cooling effects, inherent to how diesel engines work (the expansion stroke, dilution of combustion products with the rest of in-cylinder charge and the one caused by wall impingement), reflect that: (1) the dilution effect explains the 10% of the NO2/NOx ratio under CDC conditions and (2) the coupling of the dilution with the expansion stroke cooling effects can explain the NO2 increase typical of LTC conditions. These results were also supported by some experiments performed in a single-cylinder diesel engine. Consequently, the cooling effect caused by dilution should be considered when modeling the NO2 formation just like the expansion stroke., The authors would like to acknowledge the contribution of the Spanish Ministry of Economic and Competitively for the financial support of the present research study associate to the Projects TRA 2008-06448 (VELOSOOT) and TRA 2010-20271 (LOWTECOM). Additionally, special acknowledgement to Dr. L. Pickett which kindly shared a copy of the TSL model to perform the diesel spray simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New 0-D methodology for predicting NO formation under continuously varying temperature and mixture composition conditions

  • Benajes, Jesús|||0000-0002-1653-9188
  • López, J. Javier|||0000-0002-9486-2511
  • Molina, Santiago|||0000-0001-7879-2421
  • Redón Lurbe, Pau
The development of new diesel combustion modes characterized by low combustion temperatures, to minimize the NOx emissions, has caused a noticeable change in the diesel spray s structure and in the NOx chemistry, gaining relevance the N2O and the prompt routes in detriment of the thermal mechanism.Therefore, to accurately predict the NOx emissions, the detailed chemistry and physics must be taken into account, with the consequence of increasing the computational cost. The authors propose in the current study a new predictive methodology associated to low computational cost, where detailed chemistry and simplified physics are considered. To diminish even more the computational cost, the chemistry was tabulated as a function of temperature and oxygen excess mass fraction (parameter which effectively couples the equivalence ratio and the EGR rate). This tool has been developed with the objective of being applicable in continuously varying temperature and mixture fraction conditions (the diffusion diesel spray context) and was validated with the Two-Stage Lagrangian model (TSL-model) and with real engine measurements. The results in both validation scenarios reflect a high degree of accuracy making it applicable, at least, to perform qualitative predictions. By extension, it is expected to perform similarly in continuously varying temperature conditions (i.e.: homogenous charge compression ignition diesel combustion modes) which are less demanding computationally speaking., The authors would like to acknowledge the contribution of the Spanish Ministry of Economic and Competitively for the financial support of the present research study associate to the projects TRA 2008-06448 (VELOSOOT) and to Dr. V. Golovitchev for his valuable comments and suggestions.