Pasar al contenido principal

METODOS Y MODELOS PARA LA PLANIFICACION DE OPERACIONES Y GESTION DE PEDIDOS EN CADENAS DE SUMINISTRO CARACTERIZADAS POR LA FALTA DE HOMOGENEIDAD EN EL PRODUCTO

DPI2011-23597

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Model-Driven Decision Support System for the Master Planning of Ceramic Supply Chains with Non-uniformity of Finished Goods

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Boza, Andres|||0000-0002-5429-0416
  • Poler, R.|||0000-0003-4475-6371
[EN] In this paper, a Model-Driven Decision Support System (DSS) for the Master Planning of ceramic Supply Chains characterized by producing units of the same finished good in a specific lot that differ in the aspect (quality), tone (colour) and/or gage (thickness) is proposed. The DSS is based on a mathematical programming model reflecting these non-uniformity characteristics. Through the different DSS functionalities, Decision Makers can generate different scenarios by means of changing any data. Optimal solution of each scenario can be evaluated for robustness under other scenarios. The Decision Maker can compare different solutions and finally choose the most satisfactory one for being implemented. To demonstrate the validity of the DSS, a realistic example is described through the generation of different scenarios based on the degree of finished goods uniformity in lots., This work has been carried out as part of the project “DPI2008-06788-C02-01 (PERMACASI)” funded by Ministerio de Ciencia e Innovación of the Spanish Government and as part of the project “PAID-06-10-2396 (NegoSol-MAS)” funded by Vicerrectorado de Investigación of Universidat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of particle swarm optimisation with backward calculation to solve a fuzzy multi-objective supply chain master planning model

  • Grillo Espinoza, Hanzel
  • Peidro Payá, David|||0000-0001-8678-6881
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Mula, Josefa|||0000-0002-8447-3387
Traditionally, supply chain planning problems consider variables with uncertainty associated with uncontrolled factors. These factors have been normally modelled by complex methodologies where the seeking solution process often presents high scale of difficulty. This work presents the fuzzy set theory as a tool to model uncertainty in supply chain planning problems and proposes the particle swarm optimisation (PSO) metaheuristics technique combined with a backward calculation as a solution method. The aim of this combination is to present a simple effective method to model uncertainty, while good quality solutions are obtained with metaheuristics due to its capacity to find them with satisfactory computational performance in complex problems, in a relatively short time period., This research is partly supported by the Spanish Ministry of Economy and Competitiveness projects 'Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity' (PLANGES-FHP) (Ref. DPI2011-23597) and 'Operations design and Management of Global Supply Chains' (GLOBOP) (Ref. DPI2012-38061-C02-01); by the project funded by the Polytechnic University of Valencia entitled 'Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics' (PAID-06-12); and by the Ministry of Science, Technology and Telecommunications, government of Costa Rica (MICITT), through the incentive program of the National Council for Scientific and Technological Research (CONICIT) (contract No FI-132-2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review of mathematical models for production planning under uncertainty due to lack of homogeneity: proposal of a conceptual model

  • Mundi, I.
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Poler, R.|||0000-0003-4475-6371
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Lack of homogeneity in the product (LHP) appears in some production processes that confer heterogeneity in the characteristics of the products obtained. Supply chains with this issue have to classify the product in different homogeneous subsets, whose quantity is uncertain during the production planning process. This paper proposes a generic framework for reviewing in a unified way the literature about production planning models dealing with LHP uncertainty. This analysis allows the identification of similarities among sectors to transfer solutions between them and gaps existing in the literature for further research. The results of the review show: (1) sectors affected by LHP inherent uncertainty, (2) the inherent LHP uncertainty types modelled, and (3) the approaches for modelling LHP uncertainty most widely employed. Finally, we suggest a conceptual model reflecting the aspects to be considered when modelling the production planning in sectors with LHP in an uncertain environment., This research was initiated within the framework of the project funded by the Ministerio de Economía y Competitividad [Ref. DPI2011-23597] entitled ‘Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity’ (PLANGES-FHP) already finished. After, the project leading to this application has received funding from the European Union’s research and innovation programme under the H2020 Marie Skłodowska-Curie Actions with the grant agreement No 691249, Project entitled ’Enhancing and implementing Knowledge based ICT solutions within high Riskand Uncertain Conditions for Agriculture Production Systems’ (RUC-APS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy sets to model master production effectively in Make to Stock companies with Lack of Homogeneity in the Product

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Poler, R.|||0000-0003-4475-6371
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Supply chains (SCs) with Lack of Homogeneity in the Product (LHP) present inherent sources of uncertainty due to the heterogeneity of raw materials and uncontrollable productive factors. LHP SCs are characterized by producing units of the same finished goods that are not homogeneous. However, the exact quantity of each one in a production lot will only be known when it is produced. These SCs must classify finished goods into subtypes according to customer requirements. In this paper, a fuzzy mathematical programming model is proposed. To match homogeneity customer requirements with the sizing of production lots, the proposed master plan considers two main aspects: 1) forecast demand is expressed in terms of number of orders with a similar order size; 2) LHP is modeled by considering that each production lot is split into several homogeneous sub-lots. Then uncertainty is considered by means of fuzzy sets in order sizes and homogeneous sub-lots quantities. The fuzzy model is evaluated by emulating real conditions and is compared with the equivalent deterministic one to assess its robustness. The results demonstrate that the fuzzy approach outperforms the deterministic one and that it is more effective for handling real situations when LHP is present., This research has been carried out within the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical modelling of the order-promising process for fruit supply chains considering the perishability and subtypes of products

  • Grillo Espinoza, Hanzel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] This paper proposes a mixed integer mathematical programming model to support the complex order promising process in fruit supply chains. Due to natural factors, such as land, weather or harvesting time, these supply chains present units of the same product that differ in certain relevant attributes to customers (subtypes). This becomes a manage- rial problem when customers require specific subtypes in their orders. Additionally, the de- terioration of the original characteristics of subtypes over time generates waste and gives rise to a shelf life-based pricing policy. Therefore, the developed model should ensure that customers are served not only the quantities and dates, but also the required homogene- ity and freshness. The model aims to maximise two conflicting objectives: total profit and mean product freshness. The novelty of the model derives from considering both homo- geneity in subtypes as a requirement in customer orders and the traceability of product deterioration over time. Different scenarios are defined according to the weight assigned to each objective, shelf-life length and pricing policy in a rolling horizon scheme. The nu- merical experiments conducted for a real orange and tangerine supply chain, show the model¿s validity and the conflicting behaviour of the two objectives. The highest profit is made at the expense of the lowest mean freshness delivered, which is reinforced by the narrower the price variation with freshness. Finally, the positive impact of prolonging the product¿s shelf life on both objectives is shown., This research has been partly supported by the Ministry of Science, Technology and Telecommunications, of the government of Costa Rica (MICITT), from the Spanish "Science, Technology and Telecommunications" through the programme of innovation and human capital for competitiveness (PINN) (contract number PED-019-2015-1), and by the Spanish Ministry of Economy and Competitiveness Project "Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP) (Ref. DPI2011-23597)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation to reallocate supply to committed orders under shortage

  • Esteso, Ana|||0000-0003-0379-8786
  • Mula, Josefa|||0000-0002-8447-3387
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Campuzano-Bolarín, Francisco
[EN] This article aims to deal with the reallocating supply problem in both its real and planned contexts, to orders that result from the order promising process under shortage. To this end, we propose a system dynamics-based simulation model to facilitate modelling for order managers, and to provide a graphic support tool to understand the process and to make decisions. The basis of the simulation model's structure is a mixed-integer linear programming approach that intends to maximise profits by considering the possibility of making partial and delayed deliveries. To illustrate this, we consider a real-world problem from the ceramic sector that contemplates 35 orders. We obtained a solution by a mathematical programming model and a simulation model. The results show the simulation model's capacity to obtain near-optimum results, and to provide a simulated history of the system., "This is an Author's Accepted Manuscript of an article published in Esteso, Ana, Josefa Mula, Francisco Campuzano-Bolarín, MME Alemany Diaz, and Angel Ortiz. 2018. Simulation to Reallocate Supply to Committed Orders under Shortage. International Journal of Production Research 57 (5). Informa UK Limited: 1552 70. doi:10.1080/00207543.2018.1493239, available online at: https://www.tandfonline.com/doi/full/10.1080/00207543.2018.1493239"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Framework for Modelling the Decision: View of the Supply Chains Collaborative Planning Process

  • Pérez Perales, David|||0000-0001-5149-3835
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Lario Esteban, Francisco Cruz
  • Hernández Hormazábal, Jorge Esteban
[EN] In the supply chains operations planning context, and from a research viewpoint, it has been mainly assumed that different supply chain members make decisions in a centralised manner (one decision centre). However, reality shows that this is not the most usual situation, rather distributed supply chain decision making is. This paper proposes a framework to support modelling the decisional view of collaborative planning from a decision-making process perspective for both centralised and distributed situations. Along these lines, the framework assumes that the supply chain may be composed of one or several decision centres which aim to support every supply chain planning operation. Therefore, the main framework contributions are: consideration of decisions jointly with physical, organisation and information views; the spatial and temporal integration among the different supply chain decision centres; the definition of the macro level for “conceptually” modelling the collaborative planning process and the micro level for developing analytical models in all the decisional activities identified in the supply chains operations planning process. Finally, a brief overview of a real case application is also described., This work is derived from the authors’ participation in two research projects. The first one was funded by the spanish ministry of science and technology, entitled “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos (PERMACASI)” Ref. DPI 2008-06788-C02-01. The second one was funded by the spanish ministry of economy and competitiveness (Ref. DPI2011-23597) and the universitat politècnica de València (Ref. PAID06-11/1840), entitled “Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity” (PLANGES-FHP). We also mention the aid obtained from the universitat politècnica de València for the visiting stays made by academic and research staff in prestigious european research groups/centres, in this case the ULMS (university of Liverpool management school) as part of its “research and development support programme” (PAID-00-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reasignación óptima del inventario a pedidos en empresas cerámicas caracterizadas por la falta de homogeneidad en el producto (FHP), Optimal inventory reallocation to customer orders in ceramic tile companies characterized by the lack of homogeneity in the product (LHP)

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Lario Esteban, Francisco Cruz
[ES] La Falta de Homogeneidad en el Producto (FHP), se define como la carencia de la homogeneidad requerida por el cliente en los productos. La FHP aparece en empresas en las que los productos finales obtenidos no son homogéneos, dando lugar a la existencia de diferentes referencias (subtipos) de un mismo producto final. Esta falta de homogeneidad supone un problema cuando el cliente requiere ser servido a través de unidades homogéneas de un mismo producto y sus pedidos se comprometen en base cantidades planificadas, cuyas características de homogeneidad finales se desconocen en el momento de adquirir los compromisos con el cliente. Las constantes discrepancias provocadas por la FHP entre las cantidades planificadas y las realmente obtenidas y disponibles, pueden impedir servir pedidos comprometidos previamente. Para resolver este problema, se propone un modelo de programación matemática que permite reasignar el inventario en empresas caracterizadas por la FHP que fabrican contra almacén (Make to Stock: MTS) que combina varios objetivos. El modelo matemático propuesto se ha validado mediante su aplicación a un caso real de una empresa cerámica. El análisis de los resultados indica la obtención de mejoras considerables en la cantidad de pedidos completados a tiempo y en los ingresos por ventas., [EN] The lack of homogeneity in the product (LHP) is defined as the lack of uniformity required by the customer in the products. The LHP appears in companies where the final products obtained are not homogeneous, leading to the existence of different references (subtypes) of the same product. This lack of homogeneity is a problem when the client needs to be served through homogeneous units of a product and commit orders are based on planned quantities, whose final homogeneity characteristics are unknown at the time of acquiring the customer commitments. The frequent discrepancies caused by the LHP between planned homogeneous amounts and those actually obtained and available, can prevent the delivery of committed orders. To solve this problem, we propose a mathematical programming model for the reallocation of inventory in Make to Stock (MTS) ceramic tile companies characterized by the LHP that combines multiple objectives. The proposed mathematical model has been validated by its application to a real case of a ceramic company. The analysis of the obtained results indicates significant improvements in the number of orders completed on time and in sales revenue achieved., El presente trabajo se ha desarrollado parcialmente, tanto en el marco del proyecto de investigación titulado “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos” (DPI 2008-06788-C02-01), financiado por el Ministerio de Ciencia e Innovación español, como en el proyecto de investigación titulado “Métodos y modelos para la planificación y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la Falta de Homogeneidad en el Producto” (DPI2011-23597), financiado por el Ministerio de Economía y Competitividad español y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia (PAID-06-11/1840), dentro de los cuales se ha tenido oportunidad de validar el funcionamiento del modelo propuesto aplicándolo a una empresa líder en el sector cerámico.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metodología para la reingeniería basada en el modelado de procesos de negocio, Methodology for reengineering based on business process modeling

  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • JEANPIERRE, FREDERIC
[EN] Methodologies to improve processes help to find ways to improve industrial activity, reducing ineffi ciencies and improving the value perceived by the customer. One of the most widely used improvement methodologies to improve processes is the Business Process Reengineering. Yet, despite its high diffusion, many organizations complain about the low returns they have achieved with it and many experts stress its risks or criticize. Other methodologies surveyed are unwieldy and have problems such as long periods of implementation, or the high effort, knowledge and training required for use. Therefore, the objective of this paper is to propose a methodology for process improvement simple and effective, by which is possible to identify areas of process improvement from its modeling. The result is an agile and effective methodology that consists of seven stages by which it is possible to identify both possible improvements in process and improvements that are not technically feasible. All this with low training requirements and low cost. The main contributions of the proposed methodology are, therefore, its simplicity, ease of use and communication, its graphic aspect and its fl exibility to adapt to different companies, sectors or types of processes, [ES] Las metodologías para la mejora de procesos ayudan a encontrar formas de mejorar la actividad industrial, reduciendo ineficiencias y mejorando el valor percibido por el cliente. Una de las metodologías más utilizadas para la mejora de procesos es la Reingeniería de Procesos de Negocio, aunque, a pesar de su alta difusión, muchas organizaciones se quejan de la poca rentabilidad que han alcanzado con ella y muchos expertos subrayan sus riesgos o la critican. Otras metodologías consultadas son poco manejables y presentan problemas como: largos periodos de implementación o el elevado esfuerzo, conocimientos y formación requeridos para su utilización. Por ello, el objetivo del presente trabajo es proponer una metodología para la mejora de procesos sencilla y efectiva, mediante la cual se puedan identificar los aspectos de mejora de un proceso a partir de su modelado. El resultado obtenido es una metodología ágil y eficaz, que consta de siete fases mediante la cuales es posible identificar tanto posibles mejoras en el proceso como mejoras que no son viables técnicamente. Todo ello con bajos requerimientos de formación y con bajo coste. Las principales aportaciones de la metodología propuesta son, por tanto, su simplicidad, su facilidad de uso y de comunicación, su carácter gráfico y su flexibilidad para adaptarse a distintas empresas, sectores o tipos de procesos., El presente trabajo ha sido parcialmente desarrollado en el marco del Proyecto titulado “Métodos y modelos para la planificación de operaciones y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la falta de homogeneidad en el producto”, subvencionado por el Ministerio Español de Economía y Competitividad (MICINN), con referencia DPI2011-23597 y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia, con referencia PAID06-11/1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model-driven decision support system for reallocation of supply to orders under uncertainty in ceramic companies

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Boza, Andres|||0000-0002-5429-0416
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
In ceramic companies, uncertainty in the tone and gage obtained in first quality units of the same finished good (FG) entails frequent discrepancies between planned homogeneous quantities and real ones. This fact can lead to a shortage situation in which certain previously committed customer orders cannot be served because there are not enough homogeneous units of a specificFG (i.e., with the same tone and gage). In this paper, a Model-Driven Decision Support System (DSS) is proposed to reassign the actual homogeneous stock and the planned homogeneous sublots to already committed orders under uncertainty by means of a mathematical programming model (SP-Model). The DSS functionalities enable ceramic decision makers to generate different solutions by changing model options. Uncertainty in the planned homogeneous quantities, and any other type of uncertainty, is managed via scenarios. The robustness of each solution is tested in planned and real situations with another DSS functionality based on another mathematical programming model (ASP-Model). With these DSS features, the ceramic decision maker can choose in a friendly fashion the orders to be served with the current homogeneous stock and the future uncertainty homogeneous supply to better achieve a balance between the maximisation of multiple objectives and robustness., This research has been carried out within the PLANGES-FHP Project framework funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597), the Polytechnic University of Valencia (Ref. PAID-06-11/1840) and the ADENPRO-PJP project (Ref. UPV PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A review of mathematical models for supporting the order promising process under Lack of Homogeneity in Product and other sources of uncertainty

  • Grillo-Espinoza, Hanzel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
[EN] This paper presents a review of mathematical programming models for supporting the order promising process (OPP) under Lack of Homogeneity in Product (LHP) conditions and uncertainty in a modelling approach. LHP appears in productive processes with raw materials, which directly stem from nature and/or production processes with operations that confer heterogeneity to the characteristics of the out-puts obtained, even when the inputs used are homogenous. LHP has a direct impact on the company s service level, mainly when the customer needs to be served with homogeneous units of the same product. LHP leads to inherent sources of uncertainty due to the natural physical characteristics of the supply chain. This research aims to determine the way that LHP, and uncertainties related either to LHP or dif-ferent variables that confer more realistic conditions to OPP, have been modelled in different LHP sectors, or others affected by uncertainty. This result may provide the opportunity to transfer knowledge among them and to identify gaps for further research. Accordingly, and in order to set the basis for future research into the OPP topic, for cases affected by LHP and for uncertainties inherent to LHP conditions, or due to other possible uncertain variables, this research needs to consider both mathematical model types: (i) mathematical programming models of the OPP that consider some LHP characteristic and (ii) mathematical programming models of the OPP that consider any type of uncertainty in the modelling approach. We propose a taxonomy approach to classify and analyse the literature based on the main characteristics of its environment, order promising approach, customer order characteristics, modelling characteristics, and LHP and uncertainty modelling. The main finding of this research was that research into OPP modelling, combined with LHP characteristics and uncertainty, are lacking. We provide some starting points for further research in this field., This research has been partly supported by Spanish Ministry of Economy and Competitiveness Project 'Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity' (PLANGES-FHP) (Ref. DPI2011-23597), and by the Ministry of Science, Technology and Telecommunications, Government of Costa Rica (MICITT), through the program of innovation and human capital for competitiveness (PINN) (Contract No. PED-019-2015-1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fuzzy model for shortage planning under uncertainty due to lack of homogeneity in planned production lots

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
  • Grillo Espinoza, Hanzel
Lack of homogeneity in the product (LHP) affects several sectors like horticulture, reverse logistics, furniture, ceramics and leathers, among others. Productive processes with LHP are characterized by manufacturing units of the same finished good (FG) with certain attributes that differ and are relevant to customers. This aspect leads to the existence of different subtypes of the same FG in each production lot, which provides homogeneous sublots. Due to inherent LHP uncertainty, the size of each homogeneous sublot is not known until produced. LHP becomes a problem when customers order several units of the same FG and require homogeneity among them; i.e., being served with the same subtype. Like inherent LHP uncertainty, discrepancies between planned homogeneous quantities and the real ones is quite usual. This means it is impossible to serve committed orders with the previously defined requirements of quantity, homogeneity and due date, which brings about a shortage situation. In this paper, a fuzzy mixed integer linear programming model is proposed to support shortage planning in environments with LHP (LHP-FSP model). The LHP-FSP model aims to maximize the profits of served orders by reallocating the quantities of subtypes in stock and the uncertainty future ones in the master plan among the already committed orders. One of the main contributions of the paper is to model the fuzzy interdependent coefficients that represent the fraction of each homogeneous sublot. Finally, experiments based on realistic data from a ceramic company have been designed to validate the model and to analyze its behavior in different scenarios., This research has been carried out within the project framework funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Universitat Politecnica de Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Event Management in Decision-Making processes with Decision Support Systems

  • Boza, Andres|||0000-0002-5429-0416
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Vicens Salort, Eduardo|||0000-0002-8111-5269
  • Cuenca, L.|||0000-0003-3589-4182
DSS systems are exposed to events from any decision level of the company and it is possible to start the decision process from scratch in case any unexpected internal and external events take place. Thus, an event monitoring and management system should interact with the DSS to manage events that might affect their decisions. It should act as a supra-system to identify when decisions made are still valid or need to be reanalysed. The traditional configuration of DSS (where they collect internal and external information of the organization and the decision-maker is involved in the decision-making process) should be extended to treat event management using a monitoring and management system which monitors internal and external information and facilitate the introduction of no monitored events., This Research has been carried out in the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the ADENPRO-PJP project (ref. SP20120703) funded by the Vicerrectorat d’Investigació de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A decision support tool for the order promising process with product homogeneity requirements in hybrid Make-To-Stock and Make-To-Order environments. Application to a ceramic tile company

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Order promising in manufacturing systems that produce non-uniform units of the same finished good becomes a more complex process when customer orders need to be served with homogeneous units. To facilitate this task, we propose a mathematical model-based decision tool to support the order promising process according to product homogeneity requirements in hybrid Make-To-Stock (MTS) and Make-To-Order (MTO) contexts. In these manufacturing environments, the comparison of Available-To-Promise (ATP) and/or Capable-To-Promise (CTP) quantities with homogeneous ones ordered by customers is necessary during the order commitment. To properly deal with customers' product uniformity requirements, different ATP consumption rules are implemented by defining a novel objective function. CTP modelling in these systems also entails having to address new aspects, such as estimating future homogeneous quantities in additional lots to the master plan, accomplishing minimum lot sizes and saving in setups when programming new lots. By including CTP in the order promising model, a closer integration with the master production schedule is achieved. The resulting mathematical model was applied to a ceramic tile company in different supply scenarios and execution modes, and at several availability levels (ATP and ATP&CTP). The results validate model performance and provide insights into the impact of ATP consumption rules on the profits made from committed customer orders in different scenarios for the specific ceramic tile company., This work was supported by the Spanish Ministry of Economy and Competitiveness with Grant DPI2011-23597 and the Universitat Polito cnica de Valencia with Grant Ref. PAID-06-11/1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Fuzzy Order Promising Model With Non-Uniform Finished Goods

  • Grillo-Espinoza, Hanzel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Mula, Josefa|||0000-0002-8447-3387
[EN] In this paper, in order to reliably meet the homogeneity required by customers, a fuzzy model is proposed to support the promising process in LHP contexts after taking into account uncertainty in planned homoge- neous sublots. The fuzzy model is translated into an alpha- parametric equivalent crisp model. Here, it is important to highlight another important novelty of the paper related to the proposed methodology to analyse the suitability of the minimum degree of possibility (the a-cut), by an adapted TOPSIS-based fuzzy procedure. Finally, the experimental design, which is inspired in the ceramic sector, proves both the validity of the model and a better performance of the fuzzy model compared to the deterministic one, in several executions with forecasts of the real size of homogeneous sublots., This research is partly supported by: The Ministry of Science, Technology and Telecommunications of the of Costa Rica Government (MICITT), through the Programme of Innovation and Human Capital for Competitiveness (PINN)(Contract No. PED-019-2015-1); and the Spanish Ministry of Economy and Competitiveness Projects "Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity'' (PLANGES-FHP) (Ref. DPI2011-23597) and "Operations design and Management of Global Supply Chains'' (GLOBOP) (Ref. DPI2012-38061-C02-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Operations research models for the management of supply chains of perishable and heterogeneous products in uncertain contexts. Application to the agri-food and ceramic sectors

  • Esteso, Ana|||0000-0003-0379-8786
[ES] Algunos productos se caracterizan por su falta de homogeneidad, lo que significa que productos con diferentes características pueden ser obtenidos de un mismo proceso de producción debido a factores incontrolables como la naturaleza de las materias primas o las condiciones ambientales durante la producción. Hay cuatro aspectos que caracterizan la falta de homogeneidad en el producto: los subtipos homogéneos que se obtienen de un mismo lote de producción, la cantidad de productos que componen cada subtipo, el valor de cada uno de los subtipos, y el estado de los productos. La falta de homogeneidad en el producto dificulta la gestión de los procesos de las empresas y cadenas de suministro en el momento en el que los clientes requieren homogeneidad entre las unidades de producto que adquieren. Un ejemplo de esto se produce en el sector de la cerámica, en el que los clientes requieren que todas las unidades que van a ser ensambladas juntas tengan el mismo color, espesor y calidad por razones estéticas y de seguridad. Otro ejemplo es el extraído del sector agroalimentario, en el que el mercado final requiere productos que cumplan con un tamaño mínimo, un color particular, o sabor en el caso de las frutas. Además, el sector agroalimentario tiene la complejidad añadida producida por el deterioro de los productos a lo largo del tiempo, y la necesidad de los mercados de ofrecer a los clientes productos con una mínima duración tras su venta. En esta Tesis, se define como productos heterogéneos a aquellos productos que se pueden clasificar en subtipos homogéneos con una cantidad variable, mientras que los productos perecederos son aquellos que, además de ser heterogéneos, tienen falta de homogeneidad en su estado. De acuerdo con estos conceptos, el sector cerámico comercializa productos heterogéneos mientras que el sector agroalimentario comercializa productos perecederos. Esta Tesis propone marcos conceptuales y modelos de Investigación Operativa que soporten la gestión de cadenas de suministro con productos heterogéneos y perecederos en la toma de decisiones centralizada y distribuidas relacionadas con los niveles de decisión estratégica, táctica y operativa. El objetivo es mejorar la competitividad, sostenibilidad y flexibilidad de la cadena de suministro para adaptarse a los requerimientos del mercado bajo condiciones de incertidumbre. Para esto, se han propuesto modelos de Investigación Operativa deterministas e inciertos, cuyos resultados se comparan concluyendo que los resultados obtenidos con los modelos inciertos se adaptan mejor al comportamiento real de las cadenas de suministros.Los modelos de Investigación Operativa propuestos han contribuido a tres áreas de investigación: problemas operativos en el sector cerámico, problemas estratégicos en el sector agroalimentario y problemas de planificación en el sector agroalimentario. Las principales novedades en los problemas operativos en el sector cerámico son el modelado de las características de las baldosas cerámicas, la consideración de los requerimientos de homogeneidad entre unidades de diferentes líneas de pedido, y la posibilidad de realizar entregas parciales y entregas con retraso. Esta Tesis contribuye a los problemas estratégicos en el sector agroalimentario al diseñar una cadena de suministro completa de productos agroalimentarios frescos considerando el aspecto perecedero de los productos e integrando decisiones tácticas, y determinando el impacto real que tiene considerar el aspecto perecedero de los productos durante el diseño de la cadena de suministro ..., [CA] Alguns productes es caracteritzen per la seua falta d'homogeneïtat, el que significa que productes amb diferents característiques poden ser obtinguts d'un mateix procés de producció degut a factors incontrolables com la naturalesa de les matèries primeres o les condicions ambientals durant la producció. Hi ha quatre aspectes que caracteritzen la falta d'homogeneïtat en el producte: els subtipus homogenis que s'obtenen d'un mateix lot de producció, la quantitat de productes que componen cada subtipus, el valor de cada un dels subtipus, i l'estat dels productes. La falta d'homogeneïtat en el producte dificulta la gestió dels processos de les empreses i cadenes de subministrament en el moment en què els clients requerixen homogeneïtat entre les unitats de producte que adquirixen. Un exemple d'açò es produïx en el sector de la ceràmica, en el que els clients requerixen que totes les unitats que seran acoblades juntes tinguen el mateix color, grossària i qualitat per raons estètiques i de seguretat. Un altre exemple és l'extret del sector agroalimentari, en el que el mercat final requerix productes que complisquen amb una grandària mínima, un color particular, o sabor en el cas de les fruites. A més, el sector agroalimentari té la complexitat afegida produïda pel deteriorament dels productes al llarg del temps, i la necessitat dels mercats d'oferir als clients productes amb una mínima duració després de la seua venda. En aquesta Tesi, es definix com a productes heterogenis a aquells productes que es poden classificar en subtipus homogenis amb una quantitat variable, mentres que els productes peribles són aquells que, a més de ser heterogenis, tenen falta d'homogeneïtat en el seu estat. D'acord amb aquests conceptes, el sector ceràmic comercialitza productes heterogenis mentres que el sector agroalimentari comercialitza productes peribles. Aquesta Tesi proposa marcs conceptuals i models d'Investigació Operativa que suporten la gestió de cadenes de subministrament amb productes heterogenis i peribles en la presa de decisions centralitzada i distribuïdes relacionades amb els nivells de decisió estratègica, tàctica i operativa. L'objectiu és millorar la competitivitat, sostenibilitat i flexibilitat de la cadena de subministrament per adaptar-se als requeriments del mercat sota condicions d'incertesa. Per a açò, s'han proposat models d'Investigació Operativa deterministes i incerts, els resultats es comparen concloent que els resultats obtinguts amb els models incerts s'adapten millor al comportament real de les cadenes de subministraments. Els models d'Investigació Operativa proposats han contribuït a tres àrees d'investigació: problemes operatius en el sector ceràmic, problemes estratègics en el sector agroalimentari i problemes de planificació en el sector agroalimentari. Les principals novetats en els problemes operatius en el sector ceràmic són el modelatge de les característiques de les rajoles ceràmiques, la consideració dels requeriments d'homogeneïtat entre unitats de diferents línies de comanda, i la possibilitat de realitzar lliuraments parcials i lliuraments amb retard. Aquesta Tesi contribueix als problemes estratègics en el sector agroalimentari al dissenyar una cadena de subministrament completa de productes agroalimentaris frescos considerant l'aspecte perible dels productes, integrant decisions tàctiques, i determinant l'impacte real que té considerar l'aspecte perible dels productes durant el disseny de la cadena de subministrament ..., [EN] Some products are characterised by their lack of homogeneity, what means that products with different characteristics can be obtained from the same production process due to uncontrollable factors such as the nature of raw materials or the environmental conditions during production. There are four aspects that characterize the lack of homogeneity in the product: the homogeneous subtypes to be obtained from a production lot, the quantity of products that belong to each subtype, the value related to each of the subtypes and the state of the products. The lack of homogeneity in the product hinders the management of the supply chain or company's processes at the time customers require the homogeneity among the acquired units of product. An example of this is produced in the ceramic tile sector, in which customers need all acquired ceramic tiles that are going to be jointly assembled to have the same colour, thickness and quality for aesthetic and safety reasons. Another example is the extracted from the agri-food sector, in which final markets require products that meet some characteristics such as a minimum size, a particular colour or flavour in the case of fruits. In addition, the agri-food sector has the added complexity produced by the deterioration of products over time, and the need of markets to offer to end consumers products with a minimum durability after sale. In this Thesis, heterogeneous products are defined as products for which different subtypes can be obtained in a variable quantity while perishable products are those that, apart from being heterogeneous, have a lack of homogeneity in their state. According to these concepts, ceramic sectors would commercialize heterogeneous products while the agri-food sector would do so with perishable products. This Thesis proposes conceptual frameworks and Operations Research models to support the management of supply chains with heterogeneous and perishable products in centralized and distributed decision-making processes related to strategic, tactical and operative decisional levels. The objective is to improve the supply chain competitiveness, sustainability and flexibility to adapt to market requirements under uncertain conditions. For this, both deterministic and uncertain Operations Research models have been proposed, whose results are compared concluding that results obtained with uncertain models better fit with the behaviour of real supply chains. The proposed Operations Research models have contributed to three research areas: operational problems in the ceramic sector, strategic problems in the agri-food sector and planning problems in the agri-food sector. Main novelties in the ceramic operational problems are the modelling of the characteristics of ceramic tile products, the consideration of homogeneity requirements between units from different order lines, and the possibility of making partial deliveries and delayed deliveries. This Thesis contributes to strategic problems in agri-food products by designing an entire fresh agri-food supply chain considering the perishability of products and integrating tactical decisions, and by determining the real impact that considering the products' perishability has on the supply chain design process ..., This Thesis has been developed in the Research Centre of Management and Production Engineering (CIGIP, for its acronym in Spanish “Centro de Investigación en Gestión e Ingeniería de Producción”) of the Universitat Politècnica de València with the support of the predoctoral grant Programme of Formation of University Professors (FPU, for its acronym in Spanish “Formación de Profesorado Universitario”) from the Spanish Ministry of Science, Innovation and Universities (Ref. FPU15/03595). The supervisors of this Thesis are Dr. Angel Ortiz, and Dra. María del Mar Alemany Diaz that are Professors in the Research Centre of Management and Production Engineering (CIGIP) of the Universitat Politècnica de València. The FPU grant has been endorsed by the supervisor Dr. Ángel Ortiz. This Thesis has also been supported by the project ‘RUC-APS: Enhancing and implementing Knowledge based ICT solutions within high Risk and Uncertain Conditions for Agriculture Production Systems’ (Ref. 691249) funded by the EU under its funding scheme H2020-MSCA-RISE-2015, the project ‘Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity’ (PLANGES-FHP) (Ref. DPI2011- 23597) funded by the Spanish Ministry of Economy and Competitiveness. The projects RUC-APS and PLANGES-FHP have been led by the one of the supervisors of this Thesis Dr. María del Mar Eva Alemany. In order to obtain the international mention for this Thesis, three months of research stages have been made in the research agency Agenzia Lucana di Sviluppo e di Innovazione in Agricoltora, located in Metaponto (Italy)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Available-To-Promise modeling for multi-plant manufacturing characterized by lack of homogeneity in the product: An illustration of a ceramic case

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Gómez, F.
  • Lario Esteban, Francisco Cruz
Lack of homogeneity in the product (LHP) appears in some production processes which incorporate raw materials that originate directly from nature and/or production processes with operations that confer heterogeneity to the characteristics of the outputs obtained, even when the inputs used are homogeneous. Poor LHP management may have a very negative impact on the customer service level and on the supply chains’ operation costs, especially when the customer needs to be served with homogeneous units of one same product. One of the key processes for suitable LHP management is the order-promising process. This work presents a mathematical programming order-promising model for make-to-stock environments with LHP. The model considers two objectives placed within a single objective by the weighted sum method. For the purpose of testing the validity of the proposed model and to evaluate the characteristics of the solutions obtained in different scenarios, numerical experiments based on realistic data from a ceramic tile company have been conducted. The results show that better results are obtained for the defined performance measures if multiple objectives are considered when promising orders than the single objective of maximizing profits. Furthermore, the superiority of the results obtained from the proposed model, if compared with current company practice, proves the model’s utility., This research has been carried out in the framework of the project funded by the Spanish Ministry of Science and Technology, entitled "Personalizacion en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos (PER-MACASI)" Ref. DPI 2008-06788-C02-01, and the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A multi-objective model for inventory and planned production reassignment to committed orders with homogeneity requirements

  • Esteso, Ana|||0000-0003-0379-8786
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Peidro Payá, David|||0000-0001-8678-6881
[EN] Certain industries are characterized by obtaining non-homogeneous units of the same product. However, customers require homogeneity in some attributes between units of the same and different products requesting in their orders. To commit such orders, an estimation of the homogeneous product to be obtained can be used. Unfortunately, estimations of homogenous product quantities can differ considerably from real distributions. This fact could entail the impossibility of accomplishing the delivery of customer orders in the terms previously committed. To solve this, we propose a multi-objective mathematical programming model to reallocate already available homogeneous products in stock and planned production to committed orders. The main contributions of this model are the consideration of the homogeneity requirement between units of different lines of the same order, the allowance of partial deliveries of order lines, and the specification of some relevant attributes of products to accomplish with the customer homogeneity requirement. Different hypotheses are proved through experiments and statistical analyses applied to a ceramic tile company. The epsilon-constraint method is used to obtain an implementable solution for the company. The weighted sum method is used when proving other hypotheses that offer some managerial insights to companies., This work was supported by the Program of Formation of University Professors (FPU) of the Spanish Ministry of Education, Culture and Sport (FPU15/03595), and by the Spanish Ministry of Economy and Competitiveness Project DPI2011-23597.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model-driven DSS architecture for delivery management in collaborative supply chains with lack of homogeneity in products

  • Boza, Andres|||0000-0002-5429-0416
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Cuenca, L.|||0000-0003-3589-4182
Uniform product deliveries are required in the ceramic, horticulture and leather sectors because customers require product homogeneity to use, present or consume them together. Some industries cannot prevent the lack of homogeneity in products in their manufacturing processes; hence, they cannot avoid non-uniform finished products arriving at their warehouses and, consequently, fragmentation of their stocks. Therefore, final uniform product amounts do not match planned production ones, which frequently makes serving previous committed orders with homogeneous quantities impossible. This paper proposes a model-driven decision support system (DSS) to help the person in charge of delivery management to reallocate the available real inventory to orders to satisfy homogenous customer requirements in a collaborative supply chain (SC). The DSS has been validated in a ceramic tile collaborative SC., This research has been carried out within the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled 'Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity' (PLANGES-FHP). Also, we thank the comments and suggestions made by the Editors and the Reviewers. In our opinion, these changes have improved the quality of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Effect of Modeling Qualities, Tones and Gages in Ceramic Supply Chains&apos, Master Planning

  • Mundi, Isabel
  • Alemany, Ma Mar Eva
  • Boza, Andres|||0000-0002-5429-0416
  • Poler, R.|||0000-0003-4475-6371
[EN] Ceramic production processes are characterized by providing quantities of the same finished goods that differ in qualities, tones and gages. This aspect becomes a problem for ceramic supply chains (SCs) that should promise and serve customer orders with homogeneous quantities of the same finished good. In this paper a mathematical programming model for the centralized master planning of ceramic SC is proposed. Inputs to the master plan include demand forecasts in terms of customer order classes based on their order size and splitting percentages of a lot into homogeneous sub-lots. Then, the master plan defines the size and loading of lots to production lines and their distribution with the aim of maximizing the number of customer orders fulfilled with homogeneous quantities in the most efficient manner for the SC. Finally, the effect of modeling qualities, tones and gages in master planning is assessed. Keywords: Ceramic Supply Chains, Mathematical Programming Model, Qualities, Tones, Gages, Lack of Homogeneity in the Product, This research has been carried out in the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID06-11/1840) entitled “Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity” (PLANGES-FHP)