Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Model-Driven Decision Support System for the Master Planning of Ceramic Supply Chains with Non-uniformity of Finished Goods

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Boza, Andres|||0000-0002-5429-0416
  • Poler, R.|||0000-0003-4475-6371
[EN] In this paper, a Model-Driven Decision Support System (DSS) for the Master Planning of ceramic Supply Chains characterized by producing units of the same finished good in a specific lot that differ in the aspect (quality), tone (colour) and/or gage (thickness) is proposed. The DSS is based on a mathematical programming model reflecting these non-uniformity characteristics. Through the different DSS functionalities, Decision Makers can generate different scenarios by means of changing any data. Optimal solution of each scenario can be evaluated for robustness under other scenarios. The Decision Maker can compare different solutions and finally choose the most satisfactory one for being implemented. To demonstrate the validity of the DSS, a realistic example is described through the generation of different scenarios based on the degree of finished goods uniformity in lots., This work has been carried out as part of the project “DPI2008-06788-C02-01 (PERMACASI)” funded by Ministerio de Ciencia e Innovación of the Spanish Government and as part of the project “PAID-06-10-2396 (NegoSol-MAS)” funded by Vicerrectorado de Investigación of Universidat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy sets to model master production effectively in Make to Stock companies with Lack of Homogeneity in the Product

  • Mundi Sancho, María Isabel
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Poler, R.|||0000-0003-4475-6371
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Supply chains (SCs) with Lack of Homogeneity in the Product (LHP) present inherent sources of uncertainty due to the heterogeneity of raw materials and uncontrollable productive factors. LHP SCs are characterized by producing units of the same finished goods that are not homogeneous. However, the exact quantity of each one in a production lot will only be known when it is produced. These SCs must classify finished goods into subtypes according to customer requirements. In this paper, a fuzzy mathematical programming model is proposed. To match homogeneity customer requirements with the sizing of production lots, the proposed master plan considers two main aspects: 1) forecast demand is expressed in terms of number of orders with a similar order size; 2) LHP is modeled by considering that each production lot is split into several homogeneous sub-lots. Then uncertainty is considered by means of fuzzy sets in order sizes and homogeneous sub-lots quantities. The fuzzy model is evaluated by emulating real conditions and is compared with the equivalent deterministic one to assess its robustness. The results demonstrate that the fuzzy approach outperforms the deterministic one and that it is more effective for handling real situations when LHP is present., This research has been carried out within the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Framework for Modelling the Decision: View of the Supply Chains Collaborative Planning Process

  • Pérez Perales, David|||0000-0001-5149-3835
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Lario Esteban, Francisco Cruz
  • Hernández Hormazábal, Jorge Esteban
[EN] In the supply chains operations planning context, and from a research viewpoint, it has been mainly assumed that different supply chain members make decisions in a centralised manner (one decision centre). However, reality shows that this is not the most usual situation, rather distributed supply chain decision making is. This paper proposes a framework to support modelling the decisional view of collaborative planning from a decision-making process perspective for both centralised and distributed situations. Along these lines, the framework assumes that the supply chain may be composed of one or several decision centres which aim to support every supply chain planning operation. Therefore, the main framework contributions are: consideration of decisions jointly with physical, organisation and information views; the spatial and temporal integration among the different supply chain decision centres; the definition of the macro level for “conceptually” modelling the collaborative planning process and the micro level for developing analytical models in all the decisional activities identified in the supply chains operations planning process. Finally, a brief overview of a real case application is also described., This work is derived from the authors’ participation in two research projects. The first one was funded by the spanish ministry of science and technology, entitled “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos (PERMACASI)” Ref. DPI 2008-06788-C02-01. The second one was funded by the spanish ministry of economy and competitiveness (Ref. DPI2011-23597) and the universitat politècnica de València (Ref. PAID06-11/1840), entitled “Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity” (PLANGES-FHP). We also mention the aid obtained from the universitat politècnica de València for the visiting stays made by academic and research staff in prestigious european research groups/centres, in this case the ULMS (university of Liverpool management school) as part of its “research and development support programme” (PAID-00-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reasignación óptima del inventario a pedidos en empresas cerámicas caracterizadas por la falta de homogeneidad en el producto (FHP), Optimal inventory reallocation to customer orders in ceramic tile companies characterized by the lack of homogeneity in the product (LHP)

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Lario Esteban, Francisco Cruz
[ES] La Falta de Homogeneidad en el Producto (FHP), se define como la carencia de la homogeneidad requerida por el cliente en los productos. La FHP aparece en empresas en las que los productos finales obtenidos no son homogéneos, dando lugar a la existencia de diferentes referencias (subtipos) de un mismo producto final. Esta falta de homogeneidad supone un problema cuando el cliente requiere ser servido a través de unidades homogéneas de un mismo producto y sus pedidos se comprometen en base cantidades planificadas, cuyas características de homogeneidad finales se desconocen en el momento de adquirir los compromisos con el cliente. Las constantes discrepancias provocadas por la FHP entre las cantidades planificadas y las realmente obtenidas y disponibles, pueden impedir servir pedidos comprometidos previamente. Para resolver este problema, se propone un modelo de programación matemática que permite reasignar el inventario en empresas caracterizadas por la FHP que fabrican contra almacén (Make to Stock: MTS) que combina varios objetivos. El modelo matemático propuesto se ha validado mediante su aplicación a un caso real de una empresa cerámica. El análisis de los resultados indica la obtención de mejoras considerables en la cantidad de pedidos completados a tiempo y en los ingresos por ventas., [EN] The lack of homogeneity in the product (LHP) is defined as the lack of uniformity required by the customer in the products. The LHP appears in companies where the final products obtained are not homogeneous, leading to the existence of different references (subtypes) of the same product. This lack of homogeneity is a problem when the client needs to be served through homogeneous units of a product and commit orders are based on planned quantities, whose final homogeneity characteristics are unknown at the time of acquiring the customer commitments. The frequent discrepancies caused by the LHP between planned homogeneous amounts and those actually obtained and available, can prevent the delivery of committed orders. To solve this problem, we propose a mathematical programming model for the reallocation of inventory in Make to Stock (MTS) ceramic tile companies characterized by the LHP that combines multiple objectives. The proposed mathematical model has been validated by its application to a real case of a ceramic company. The analysis of the obtained results indicates significant improvements in the number of orders completed on time and in sales revenue achieved., El presente trabajo se ha desarrollado parcialmente, tanto en el marco del proyecto de investigación titulado “Personalización en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos” (DPI 2008-06788-C02-01), financiado por el Ministerio de Ciencia e Innovación español, como en el proyecto de investigación titulado “Métodos y modelos para la planificación y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la Falta de Homogeneidad en el Producto” (DPI2011-23597), financiado por el Ministerio de Economía y Competitividad español y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia (PAID-06-11/1840), dentro de los cuales se ha tenido oportunidad de validar el funcionamiento del modelo propuesto aplicándolo a una empresa líder en el sector cerámico.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metodología para la reingeniería basada en el modelado de procesos de negocio, Methodology for reengineering based on business process modeling

  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • JEANPIERRE, FREDERIC
[EN] Methodologies to improve processes help to find ways to improve industrial activity, reducing ineffi ciencies and improving the value perceived by the customer. One of the most widely used improvement methodologies to improve processes is the Business Process Reengineering. Yet, despite its high diffusion, many organizations complain about the low returns they have achieved with it and many experts stress its risks or criticize. Other methodologies surveyed are unwieldy and have problems such as long periods of implementation, or the high effort, knowledge and training required for use. Therefore, the objective of this paper is to propose a methodology for process improvement simple and effective, by which is possible to identify areas of process improvement from its modeling. The result is an agile and effective methodology that consists of seven stages by which it is possible to identify both possible improvements in process and improvements that are not technically feasible. All this with low training requirements and low cost. The main contributions of the proposed methodology are, therefore, its simplicity, ease of use and communication, its graphic aspect and its fl exibility to adapt to different companies, sectors or types of processes, [ES] Las metodologías para la mejora de procesos ayudan a encontrar formas de mejorar la actividad industrial, reduciendo ineficiencias y mejorando el valor percibido por el cliente. Una de las metodologías más utilizadas para la mejora de procesos es la Reingeniería de Procesos de Negocio, aunque, a pesar de su alta difusión, muchas organizaciones se quejan de la poca rentabilidad que han alcanzado con ella y muchos expertos subrayan sus riesgos o la critican. Otras metodologías consultadas son poco manejables y presentan problemas como: largos periodos de implementación o el elevado esfuerzo, conocimientos y formación requeridos para su utilización. Por ello, el objetivo del presente trabajo es proponer una metodología para la mejora de procesos sencilla y efectiva, mediante la cual se puedan identificar los aspectos de mejora de un proceso a partir de su modelado. El resultado obtenido es una metodología ágil y eficaz, que consta de siete fases mediante la cuales es posible identificar tanto posibles mejoras en el proceso como mejoras que no son viables técnicamente. Todo ello con bajos requerimientos de formación y con bajo coste. Las principales aportaciones de la metodología propuesta son, por tanto, su simplicidad, su facilidad de uso y de comunicación, su carácter gráfico y su flexibilidad para adaptarse a distintas empresas, sectores o tipos de procesos., El presente trabajo ha sido parcialmente desarrollado en el marco del Proyecto titulado “Métodos y modelos para la planificación de operaciones y gestión de pedidos en cadenas de suministro caracterizadas por la incertidumbre en la producción debido a la falta de homogeneidad en el producto”, subvencionado por el Ministerio Español de Economía y Competitividad (MICINN), con referencia DPI2011-23597 y por el Vicerrectorado de Investigación de la Universidad Politécnica de Valencia, con referencia PAID06-11/1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model-driven decision support system for reallocation of supply to orders under uncertainty in ceramic companies

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Boza, Andres|||0000-0002-5429-0416
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
In ceramic companies, uncertainty in the tone and gage obtained in first quality units of the same finished good (FG) entails frequent discrepancies between planned homogeneous quantities and real ones. This fact can lead to a shortage situation in which certain previously committed customer orders cannot be served because there are not enough homogeneous units of a specificFG (i.e., with the same tone and gage). In this paper, a Model-Driven Decision Support System (DSS) is proposed to reassign the actual homogeneous stock and the planned homogeneous sublots to already committed orders under uncertainty by means of a mathematical programming model (SP-Model). The DSS functionalities enable ceramic decision makers to generate different solutions by changing model options. Uncertainty in the planned homogeneous quantities, and any other type of uncertainty, is managed via scenarios. The robustness of each solution is tested in planned and real situations with another DSS functionality based on another mathematical programming model (ASP-Model). With these DSS features, the ceramic decision maker can choose in a friendly fashion the orders to be served with the current homogeneous stock and the future uncertainty homogeneous supply to better achieve a balance between the maximisation of multiple objectives and robustness., This research has been carried out within the PLANGES-FHP Project framework funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597), the Polytechnic University of Valencia (Ref. PAID-06-11/1840) and the ADENPRO-PJP project (Ref. UPV PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fuzzy model for shortage planning under uncertainty due to lack of homogeneity in planned production lots

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
  • Grillo Espinoza, Hanzel
Lack of homogeneity in the product (LHP) affects several sectors like horticulture, reverse logistics, furniture, ceramics and leathers, among others. Productive processes with LHP are characterized by manufacturing units of the same finished good (FG) with certain attributes that differ and are relevant to customers. This aspect leads to the existence of different subtypes of the same FG in each production lot, which provides homogeneous sublots. Due to inherent LHP uncertainty, the size of each homogeneous sublot is not known until produced. LHP becomes a problem when customers order several units of the same FG and require homogeneity among them; i.e., being served with the same subtype. Like inherent LHP uncertainty, discrepancies between planned homogeneous quantities and the real ones is quite usual. This means it is impossible to serve committed orders with the previously defined requirements of quantity, homogeneity and due date, which brings about a shortage situation. In this paper, a fuzzy mixed integer linear programming model is proposed to support shortage planning in environments with LHP (LHP-FSP model). The LHP-FSP model aims to maximize the profits of served orders by reallocating the quantities of subtypes in stock and the uncertainty future ones in the master plan among the already committed orders. One of the main contributions of the paper is to model the fuzzy interdependent coefficients that represent the fraction of each homogeneous sublot. Finally, experiments based on realistic data from a ceramic company have been designed to validate the model and to analyze its behavior in different scenarios., This research has been carried out within the project framework funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Universitat Politecnica de Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A decision support tool for the order promising process with product homogeneity requirements in hybrid Make-To-Stock and Make-To-Order environments. Application to a ceramic tile company

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
[EN] Order promising in manufacturing systems that produce non-uniform units of the same finished good becomes a more complex process when customer orders need to be served with homogeneous units. To facilitate this task, we propose a mathematical model-based decision tool to support the order promising process according to product homogeneity requirements in hybrid Make-To-Stock (MTS) and Make-To-Order (MTO) contexts. In these manufacturing environments, the comparison of Available-To-Promise (ATP) and/or Capable-To-Promise (CTP) quantities with homogeneous ones ordered by customers is necessary during the order commitment. To properly deal with customers' product uniformity requirements, different ATP consumption rules are implemented by defining a novel objective function. CTP modelling in these systems also entails having to address new aspects, such as estimating future homogeneous quantities in additional lots to the master plan, accomplishing minimum lot sizes and saving in setups when programming new lots. By including CTP in the order promising model, a closer integration with the master production schedule is achieved. The resulting mathematical model was applied to a ceramic tile company in different supply scenarios and execution modes, and at several availability levels (ATP and ATP&CTP). The results validate model performance and provide insights into the impact of ATP consumption rules on the profits made from committed customer orders in different scenarios for the specific ceramic tile company., This work was supported by the Spanish Ministry of Economy and Competitiveness with Grant DPI2011-23597 and the Universitat Polito cnica de Valencia with Grant Ref. PAID-06-11/1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Available-To-Promise modeling for multi-plant manufacturing characterized by lack of homogeneity in the product: An illustration of a ceramic case

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Gómez, F.
  • Lario Esteban, Francisco Cruz
Lack of homogeneity in the product (LHP) appears in some production processes which incorporate raw materials that originate directly from nature and/or production processes with operations that confer heterogeneity to the characteristics of the outputs obtained, even when the inputs used are homogeneous. Poor LHP management may have a very negative impact on the customer service level and on the supply chains’ operation costs, especially when the customer needs to be served with homogeneous units of one same product. One of the key processes for suitable LHP management is the order-promising process. This work presents a mathematical programming order-promising model for make-to-stock environments with LHP. The model considers two objectives placed within a single objective by the weighted sum method. For the purpose of testing the validity of the proposed model and to evaluate the characteristics of the solutions obtained in different scenarios, numerical experiments based on realistic data from a ceramic tile company have been conducted. The results show that better results are obtained for the defined performance measures if multiple objectives are considered when promising orders than the single objective of maximizing profits. Furthermore, the superiority of the results obtained from the proposed model, if compared with current company practice, proves the model’s utility., This research has been carried out in the framework of the project funded by the Spanish Ministry of Science and Technology, entitled "Personalizacion en Masa y Cadenas de Suministro Inteligentes, con Productos y Procesos Complejos (PER-MACASI)" Ref. DPI 2008-06788-C02-01, and the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled "Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity" (PLANGES-FHP)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model-driven DSS architecture for delivery management in collaborative supply chains with lack of homogeneity in products

  • Boza, Andres|||0000-0002-5429-0416
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Cuenca, L.|||0000-0003-3589-4182
Uniform product deliveries are required in the ceramic, horticulture and leather sectors because customers require product homogeneity to use, present or consume them together. Some industries cannot prevent the lack of homogeneity in products in their manufacturing processes; hence, they cannot avoid non-uniform finished products arriving at their warehouses and, consequently, fragmentation of their stocks. Therefore, final uniform product amounts do not match planned production ones, which frequently makes serving previous committed orders with homogeneous quantities impossible. This paper proposes a model-driven decision support system (DSS) to help the person in charge of delivery management to reallocate the available real inventory to orders to satisfy homogenous customer requirements in a collaborative supply chain (SC). The DSS has been validated in a ceramic tile collaborative SC., This research has been carried out within the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID-06-11/1840) entitled 'Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity' (PLANGES-FHP). Also, we thank the comments and suggestions made by the Editors and the Reviewers. In our opinion, these changes have improved the quality of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Effect of Modeling Qualities, Tones and Gages in Ceramic Supply Chains&apos, Master Planning

  • Mundi, Isabel
  • Alemany, Ma Mar Eva
  • Boza, Andres|||0000-0002-5429-0416
  • Poler, R.|||0000-0003-4475-6371
[EN] Ceramic production processes are characterized by providing quantities of the same finished goods that differ in qualities, tones and gages. This aspect becomes a problem for ceramic supply chains (SCs) that should promise and serve customer orders with homogeneous quantities of the same finished good. In this paper a mathematical programming model for the centralized master planning of ceramic SC is proposed. Inputs to the master plan include demand forecasts in terms of customer order classes based on their order size and splitting percentages of a lot into homogeneous sub-lots. Then, the master plan defines the size and loading of lots to production lines and their distribution with the aim of maximizing the number of customer orders fulfilled with homogeneous quantities in the most efficient manner for the SC. Finally, the effect of modeling qualities, tones and gages in master planning is assessed. Keywords: Ceramic Supply Chains, Mathematical Programming Model, Qualities, Tones, Gages, Lack of Homogeneity in the Product, This research has been carried out in the framework of the project funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597) and the Polytechnic University of Valencia (Ref. PAID06-11/1840) entitled “Methods and models for operations planning and order management in supply chains characterized by uncertainty in production due to the lack of product uniformity” (PLANGES-FHP)