Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 108
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of regularized alternating least squares to an astrophysical problem

  • Llinares Llopis, Raúl|||0000-0002-9732-2262
  • Igual García, Jorge|||0000-0003-3408-4014
  • Camacho-García, Andrés|||0000-0001-8542-4264
Determination of the compounds that are present in molecular clouds is carried out from the study of the infrared spectrum of astrophysical ices. This analysis plays a fundamental role in the prediction of the future evolution of the cloud under study. The process is simulated in the laboratory under similar conditions of thermal and energetic processing, recording the infrared absorption spectrum of the resultant ice. The spectrum of each ice can be modeled as the linear instantaneous superposition of the spectrum of the different compounds, so a Source Separation approach is appropriate. We propose the use of Alternating Least Squares and a Regularized version to identify the molecules that are present in the ice mixtures. Since the spectra and abundances are non-negative, a non-negativity constraint can be applied to obtain solutions with physical meaning. We perform several simulations of synthetic and real mixtures of ices in order to compare both solutions and to show how the proposed approach provides an efficient way to recover underlying spectral patterns that are physically meaningful. (C) 2012 Elsevier Inc. All rights reserved., This work has been funded by the Valencia Regional Government (Generalitat Valenciana) through project GV/2010/002 (Conselleria d'Educacio) and by the Universidad Politecnica de Valencia under Grant No. PAID-06-09-003-382.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructural, physical, and sensory impact of starch, inulin and soy protein in low-fat gluten and lactose free white sauces

  • Guardeño Expósito, Luis Miguel
  • Hernández Carrión, María
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] The microstructural, physical, and sensory properties of low-fat sauces made with different starches, soy protein, and inulin as a fat replacer were analyzed. Gluten-free waxy starches-rice and corn-were selected as well as soy protein to obtain sauces suitable for celiac and lactose intolerant consumers. Light microscopy was used to visualize the swollen starch granules dispersed in a protein-amylopectin-inulin phase. Inulin seemed to limit protein network development, which was related with a higher dispersion of starch granules within the sauce matrix. Therefore, the sauces made with inulin had a lower apparent viscosity (¿app) values (P < 0.05) in comparison with oil sauces. The sauces made with rice starches also exhibited a lower viscosity (P < 0.05) since these granules did not swell as corn granules do. All the sauces had a remarkable physical stability since there were no syneresis phenomena and color did not change significantly (P < 0.05) after 15 d of refrigeration storage (4 °C). Finally, the sensory test suggests that oil could be substituted by inulin in the preparation of low-fat sauces since no significant differences (P < 0.05) in texture and flavor were found. These results encourage further research to optimize the formulations of these types of alternative white sauces. Practical Application: Nowadays there is a great demand of ready-to-eat products due to new consumptions habits. In this context, it would be interesting to develop low-fat sauces with inulin that could be used in this type of products improving their nutritional profile. The requirement of processed food for specific groups of population, such as celiac and lactose intolerant consumers, makes it necessary to use gluten free starches and soy protein in the formulation of sauces. The characterization of structural, physical and sensory properties is required to understand the product acceptability and its behavior during its shelf life. © 2012 Institute of Food Technologists®., The authors are grateful for the FPU grant awarded to L. M. Guardeno and the economic support received from Univ. Politecnica de Valencia-project PAID-06-09-2871 and Generalitat Valenciana-project GV-2010/038.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of prestressed concrete precast road bridges with hybrid simulated annealing

  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Gonzalez Vidosa, Fernando
  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
This paper describes one approach to the analysis and design of prestressed concrete precast road bridges, with double U-shaped cross-section and isostatic spans. The procedure used to solve the combinatorial problem is a variant of simulated annealing with a neighborhood move based on the mutation operator from the genetic algorithms (SAMO). This algorithm is applied to the economic cost of these structures at different stages of manufacturing, transportation and construction. The problem involved 59 discrete design variables for the geometry of the beam and the slab, materials in the two elements, as well as active and passive reinforcement. The parametric study showed a good orrelation for the cost, geometric and reinforcement characteristics with the span length, which can be useful for the day-to-day design of PC precast bridges. A cost sensitivity analysis first indicates that a maximum 20% rise in steel costs leads to an 11.82% increase in the cost, while a 20% rise in concrete costs increases the cost up to 4.20%, namely 2.8 times less. The analysis also indicated that the characteristics of the cost-optimized bridges are somewhat influenced by different economic scenarios for steel and concrete costs. Finally, there is a growth in the volume of concrete when the steel cost rises; surprisingly, the variation in the volume of concrete is almost insensitive to its rising price., This work was supported by the Universitat Politecnica de Valencia (Research Project PAID-06-09) and the Spanish Ministry of Science and Innovation (Research Project BIA2011-23602). The authors are grateful to the anonymous reviewers for their constructive comments and useful suggestions. The authors are also grateful to Dr. Debra Westall for her thorough revision of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving Riccati time-dependent models with random quadratic coefficient

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Company Rossi, Rafael|||0000-0001-5217-1889
  • Villafuerte Altuzar, Laura
This paper deals with the construction of approximate solutions of a random logistic differential equation whose nonlinear coefficient is assumed to be an analytic stochastic process and the initial condition is a random variable. Applying p-mean stochastic calculus, the nonlinear equation is transformed into a random linear equation whose coefficients keep analyticity. Next, an approximate solution of the nonlinear problem is constructed in terms of a random power series solution of the associate linear problem. Approximations of the average and variance of the solution are provided. The proposed technique is illustrated through an example where comparisons with respect to Monte Carlo simulations are shown. © 2011 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-08587, DPI2010-20891-C02-01, Universitat Politecnica de Valencia grant PAID06-09-2588 and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Bishop-Phelps-Bollobas Type Theorem for uniform algegras

  • Cascales, B.
  • Kadets, V.
  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
This paper is devoted to showing that Asplund operators with range in a uniform Banach algebra have the Bishop¿Phelps¿Bollobas property, i.e., they are approximated by norm attaining Asplund operators at the same time that a point where the approximated operator almost attains its norm is approximated by a point at which the approximating operator attains it. To prove this result we use the weak*-to-norm fragmentability of weak*-compact subsets of the dual of Asplund spaces and we need to observe a Urysohn type result producing peak complex-valued functions in uniform algebras that are small outside a given open set and whose image is inside a Stolz region., This research was partially supported by MEC and FEDER projects MTM2008-05396 and MTM2011-25377. The research of the second author was also partially supported by Generalitat Valenciana (GV/2010/036), and by Universidad Politecnica de Valencia (project PAID-06-09-2829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of the voltammetric tongue in fresh cod (Gadus morhua) quality assessment

  • Ruiz Rico, María
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
The aimof this work was to evaluate the use of the voltammetric tongue in the shelf-life assessment of fresh cod in cold storage. For this purpose, physico-chemical and microbial analyseswere carried out, as well as measurements with the electronic tongue. The samples exceeded the acceptability limits of total volatile basic nitrogen (TVB-N), mesophilic and Enterobacteriaceae on the fourth day of storage, which means that the fish had a shelf-life of less than 4 days. The voltammetric tongue was able to differentiate between days 0 and 1 of storage from the other days. These results are in accordance with those obtained in the physico-chemical and microbial analyses, which showed a clear loss of freshness from day 0 to day 4. In the models obtained with partial least squares for TVB-N and mesophilic counts, the predicted values were successfully fitted to the experimental values, which confirm the potential usefulness of the voltammetric tongue for assessing cod spoilage. Industrial relevance: Shelf-life assessment of fresh fish is of great interest for consumers, industries and authorities. The current methods used for this purpose are tedious, expensive, time-consuming and require skilled personnel. Therefore, the development of rapid non-destructive quality control techniques, which can be applied at any stage of the supply chain, could be highly interesting. This paper describes the possible application of a voltammetric tongue to assess cod spoilage during cold storage. This technique could be used as a rapid and non-destructive method applicable to routine quality control at any stage of the supply chain., The authors are grateful for the financial support received for the work reported here from the Universidad Politecnica de Valencia (PAID-06-09-2940) and MICINN (MAT2009-14564-004-02). A Fuentes would also like to thank the Campus de Excelencia Internacional at the Universidad Politecnica de Valencia for its support. The proof-reading of the paper was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Systematic characterization of the ionic basis of rabbit cellular electrophysiology using two ventricular models

  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Carbonell Pascual, Beatriz
  • Rodríguez, Blanca
[EN] Several mathematical models of rabbit ventricular action potential (AP) have been proposed to investigate mechanisms of arrhythmias and excitation-contraction coupling. Our study aims at systematically characterizing how ionic current properties modulate the main cellular biomarkers of arrhythmic risk using two widely-used rabbit ventricular models, and comparing simulation results using the two models with experimental data available for rabbit. A sensitivity analysis of AP properties, Ca(2+) and Na(+) dynamics, and their rate dependence to variations (+/- 15% and +/- 30%) in the main transmembrane current conductances and kinetics was performed using the Shannon et al. (2004) and the Mahajan et al. (2008a,b) AP rabbit models. The effects of severe transmembrane current blocks (up to 100%) on steady-state AP and calcium transients, and AP duration (APD) restitution curves were also simulated using both models. Our simulations show that, in both virtual rabbit cardiomyocytes, APD is significantly modified by most repolarization currents, AP triangulation is regulated mostly by the inward rectifier K(+) current (I(K1)) whereas APD rate adaptation as well as [Na(+)](i) rate dependence is influenced by the Na(+)/K(+) pump current (I(NaK)). In addition, steady-state [Ca(2+)](i) levels, APD restitution properties and [Ca(2+)](i); rate dependence are strongly dependent on I(NaK), the L-Type Ca(2+) current (I(CaL)) and the Na(+)/Ca(2+) exchanger current (I(NaCa)), although the relative role of these currents is markedly model dependent. Furthermore, our results show that simulations using both models agree with many experimentally-reported electrophysiological characteristics. However, our study shows that the Shannon et al. model mimics rabbit electrophysiology more accurately at normal pacing rates, whereas Mahajan et al. model behaves more appropriately at faster rates. Our results reinforce the usefulness of sensitivity analysis for further understanding of cellular electrophysiology and validation of cardiac AP models., This work was partially supported by the European Commission preDiCT grant (DG INFSO-224381), Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica del Ministerio de Ciencia e Innovación of Spain (TEC2008-02090, TIN2004-03602), Programa de Apoyo a la Investigación y Desarrollo (PAID-06-09-2843)de la Universidad Politécnica de Valencia, Dirección General de Política Científica de la Generalitat Valenciana (GV/2010/078), a Consellería de Educación de la Generalitat Valenciana grant (BEST/2010/102) (to J.M.F), a Universidad Politécnica de Valencia grant (PAID-00-10) (to L.R.) and an UK Medical Research Council Career Development Award (to B.R.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A moving mesh generation strategy for solving an injector internal flow problem

  • Margot , Xandra|||0000-0002-2639-0444
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Fajardo, Pablo
  • Patouna, Stavroula
[EN] The ability to handle complex geometries is an important part of transient calculations; therefore, the need for fully automatic mesh generation capable of dealing with such geometries is quite demanded. In this paper a specific approach to fully automatic three-dimensional mesh generation is presented. An approach to moving the generated mesh is also outlined. In particular, the simulation of a diesel injector needle movement is sought. The movement of the needle was calculated on the basis of injection rate experimental data and injection rate predicted data with steady state boundaries and geometry. The simulation was performed using the commercial code STAR-CD version 4.06. (C) 2010 Elsevier Ltd. All rights reserved., This research was funded by the Spanish Government in the framework of the Project "Caracterizacion experimental de la cavitacion en el flujo interno e influencia sobre modelos de chorro Diesel'', Reference TRA2007-68006-C02-01. SH and PF were partially supported by the Universidad Politecnica de Valencia under the program "Primeros Proyectos de investigacion'', in the framework of the project "Simulacion CFD de chorros Diesel en inyeccion directa: la atomizacion primaria'', Reference PAID-2759.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Corrosion Resistance and Galvanic Coupling of UNS N08031 Base Metal, Heat-Affected Zone, and Weld Metal in Phosphoric Acid at Different Temperatures

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Ibáñez-Ferrándiz, M.
  • Guenbour, Abdellah
[EN] Open-circuit potential tests and potentiodynamic anodic polarization curves have been carried out to obtain information about the electrochemical behavior of a highly alloyed austenitic stainless steel (UNS N08031) used as base metal (BM), heat-affected zone (HAZ) region, and weld metal (WM). The weld was performed using the gas tungsten arc welding technique (GTAW) with a nickel-based alloy (UNS N06059) as filler metal. The galvanic corrosion generated by the electrical contact between the base metal, the HAZ, and the weld metal was estimated from the polarization diagrams according to the mixed potential theory. The objective of the present work was to study the effect of the solution temperature on the corrosion resistance of the studied materials. These materials were tested in 5.5 M phosphoric acid (H3PO4) solution at 25°C, 40°C, 60°C, and 80°C. Results demonstrated that materials passivated spontaneously in the studied solution and their corrosion resistance decreased with temperature., We wish to express our gratitude to the Ministerio de Asuntos Exteriores y Cooperación of Spain (PCI Mediterráneo C/8196/07, Ref. C/018046/08, and D/023608/09), to Programa de Apoyo a la Investigación y Desarrollo de la Universidad Politécnica de Valencia (PAID-06-09), and to A. Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive determination of cut-off frequencies for filtering the in-cylinder pressure in diesel engines combustion analysis

  • Payri, F.|||0000-0002-3314-4911
  • Olmeda, P.|||0000-0002-3161-0165
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Martín, Jaime|||0000-0002-0496-3176
[EN] In-cylinder pressure analysis is a key tool for engine research and diagnosis and it has been object of study from the beginning of the internal combustion engines. One of its most useful application is combustion analysis on the basis of the First Law of Thermodynamics. However, heat release law calculations use the in-cylinder pressure derivative signal. Hence, the noise is increased and pressure filtering becomes necessary to remove high frequency noise, thus allowing for accurate combustion analyses. In this work, a methodology to set the cut-off frequency of a low-pass filter is proposed. Statistical criteria are used to separate the signal from the noise through the calculation of the Discrete Fourier Transform of several consecutive in-cylinder pressures cycles. Thus, only physically meaningful information is preserved. The proposed methodology is compared with some adaptive and non-adaptive algorithms used to select the cut-off frequencies, and it shows a good ability to adapt to different engine operating conditions. © 2011 Elsevier Ltd. All rights reserved., The authors thank the Universidad Politécnica de Valencia (PAID-06-09) and Generalitat Valenciana (GV/2010/045) for its valuable support to this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploiting periodicity to extract the atrial activity in atrial arrhythmias

  • Llinares Llopis, Raúl|||0000-0002-9732-2262
  • Igual García, Jorge|||0000-0003-3408-4014
[EN] Atrial fibrillation disorders are one of the main arrhythmias of the elderly. The atrial and ventricular activities are decoupled during an atrial fibrillation episode, and very rapid and irregular waves replace the usual atrial P-wave in a normal sinus rhythm electrocardiogram (ECG). The estimation of these wavelets is a must for clinical analysis. We propose a new approach to this problem focused on the quasiperiodicity of these wavelets. Atrial activity is characterized by a main atrial rhythm in the interval 3-12 Hz. It enables us to establish the problem as the separation of the original sources from the instantaneous linear combination of them recorded in the ECG or the extraction of only the atrial component exploiting the quasiperiodic feature of the atrial signal. This methodology implies the previous estimation of such main atrial period. We present two algorithms that separate and extract the atrial rhythm starting from a prior estimation of the main atrial frequency. The first one is an algebraic method based on the maximization of a cost function that measures the periodicity. The other one is an adaptive algorithm that exploits the decorrelation of the atrial and other signals diagonalizing the correlation matrices at multiple lags of the period of atrial activity. The algorithms are applied successfully to synthetic and real data. In simulated ECGs, the average correlation index obtained was 0.811 and 0.847, respectively. In real ECGs, the accuracy of the results was validated using spectral and temporal parameters. The average peak frequency and spectral concentration obtained were 5.550 and 5.554 Hz and 56.3 and 54.4%, respectively, and the kurtosis was 0.266 and 0.695. For validation purposes, we compared the proposed algorithms with established methods, obtaining better results for simulated and real registers., This paper is in part supported by the Valencia Regional Government (Generalitat Valenciana) through project GV/2010/002 (Conselleria d'Educacio) and by the Universidad Politecnica de Valencia under grant no. PAID-06-09-003-382.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Devaney chaos and distributional chaos in the solution of certain partial differential equations

  • Barrachina Civera, Xavier
  • Conejero, J. Alberto|||0000-0003-3681-7533
The notion of distributional chaos has been recently added to the study of the linear dynamics of operators and C0-semigroups of operators. We will study this notion of chaos for some examples of C0-semigroups that are already known to be Devaney chaotic. © 2012 Xavier Barrachina and J. Alberto Conejero., This work is supported in part by MEC and FEDER, Project MTM2010-14909, by Generalitat Valenciana, Project GV/2010/091, and by Universitat Politecnica de Valencia, Project PAID-06-09-2932. X. Barrachina also wants to acknowledge the support of the Grant FPI-UPV 2009-04 from Programa de Ayudas de Investigacion y Desarrollo de la Universitat Politecnica de Valencia. The authors also thank the referees for helpful comments that improved the presentation of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predicting the academic underachievement in high school in Spain over the next few years: A dynamic modelling approach

  • Camacho Vidal, Francisco Javier
  • Micle, Raluca Maria
  • Sánchez-Sánchez, A.
  • Cortés, J.-C.|||0000-0002-6528-2155
[EN] In this paper we propose a dynamic model to understand the evolution of the academic underachievement in a high school in Spain. This model is based on ideas of Christakis and Fowler where individual habits may be transmitted by social contact. Thus, to build the model we suppose that a student has academic failure when she/he gets into study habits transmitted by students with bad academic habits. From the available academic results of the Spanish high school educational system during the period 1999 2008, we fit the model to the data in order to obtain the parameters of the model. Then, we predict the academic underachievement evolution over the next few years., This work has been partially supported by the Spanish M.C.Y.T. grant MTM2009-08587 and the Universitat Politecnica de Valencia grant PAID06-09-2588
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A complete 0D thermodynamic predictive model for direct injection diesel engines

  • Payri, F.|||0000-0002-3314-4911
  • Olmeda, P.|||0000-0002-3161-0165
  • Martín, Jaime|||0000-0002-0496-3176
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] Ideal models provide the simplest way to reproduce internal combustion engine (ICE) cycles, but they usually do not represent with sufficient accuracy the actual behaviour of an ICE. A suitable alternative for research and development applications is provided by zero-dimensional (0D) thermodynamic models. Such models are very useful for predicting the instantaneous pressure and temperature in the combustion chamber, which in turn allows the prediction of engine operation characteristics. However, they use simplifying hypotheses which lead, in some cases, to a lack of accuracy or a limited predictive capability.This paper describes a 0D single-zone thermodynamic model that takes into account the heat transfer to the chamber walls, the blow-by leakage, the fuel injection and engine deformations, along with the instantaneous change in gas properties. Special attention has been paid to the description of the specific sub-models that have been used for the calculation of the energy and mass equations terms. The procedures followed for the estimation of some mechanical and heat transfer parameters and the combustion model fitting are also detailed. After the fitting, the model was validated in different operation points in a 4-cylinder 2-l DI diesel engine, showing a good capability for accurate predictions of engine performance and the gas state in the closed cycle. © 2011 Elsevier Ltd., The authors thank the Universitat Politecnica de Valencia (PAID-06-09) and Generalitat Valenciana (GV/2010/045) for their valuable support to this work and the referees for their worthy comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

I want creative neighbors. Do creative service spillovers cross regional boundaries?

  • Boix, Rafael
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
[EN] The occurrence of creative service industries (CSI) is a strong determinant of differences in wealth amongst European regions. However, it is unknown if the strong effects are limited to occurring within regional boundaries or whether there are spillover effects into neighbouring regions. The purpose of this paper is to assess the existence of CSI spillover effects on the wealth of neighbouring regions. CSI and spillovers are integrated into both an empirical model and an endogenous growth model. Both models are estimated for a sample of 250 regions in the European Union in 2008. We find that most of the effects of CSI take place within regions, although there is also evidence that CSI has indirect spillovers across regions., The authors would like to thank the Ministry of Science and Innovation and the Universitat Politècnica de València (Spain) for financially supporting this research (ECO2010-17318 MICINN Project and Research Project n. 2677-UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Resultados percibidos obtenidos por las empresas asociados al uso de las prácticas de alta implicación (HIWP), Perceived results obtained by companies associated to the use of high involvement work practices

  • Conci, Graziela
[EN] The main goal of this article is to investigate the relationships between high involvement work practices (HIWP) and the results perceived by managers of the companies using them. In the research we identify both the meta-analyses and the literature reviews done in the last 25 years. We present a revision of the literature of the articles published in the years not included in the previous revisions (from 2007 to 2011) and that analyze the association of productivity, satisfaction, quality, competitiveness or customer care indicators, as a result of the use of HIWP. As a main conclusion we can show that the adoption of HIWP, in general, contribute with positive results to the organizations, [ES] El objetivo principal de este artículo es investigar las relaciones entre las prácticas de alta implicación (HIWP) y los resultados percibidos por los mandos de las empresas. En la investigación identificamos los metaanalisis y revisiones de literatura realizados en los últimos 25 años. Aportamos una revisión de literatura de los artículos publicados en los años no contenidos en las revisiones anteriores (del 2007 al 2011) y que analizan la asociación de los indicadores de productividad, satisfacción, calidad, competitividad o atención al cliente como resultados de la aplicación de las HIWP. Como principal conclusión podemos indicar que la adopción de las HIWP, en general, aporta resultados positivos a las organizaciones., Este trabajo se ha realizado con la financiación del proyecto "arquitectura de las practicas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence" (PAID-06-09-2850) de la Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La rotación de puestos de trabajo como medio para la integración de trabajadores con discapacidad, Job rotation as a method for disabled workers integration

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
[ES] La Rotación de Puestos de Trabajo permite la variación de las tareas llevadas a cabo por los trabajadores y el tiempo empleado en cada una de ellas, facilitando la alternancia de los grupos musculares utilizados y la incorporación progresiva de trabajadores con problemas músculo-esqueléticos. Con la rotación es posible asignar a los trabajadores limitados a puestos compatibles con sus capacidades y restringir el tiempo que se exponen a factores de riesgo a los que son especialmente sensibles.Este trabajo presenta la aplicación del algoritmo DPI-ASEPEYO al diseño de agendas de RPT para prevenir los trastornos músculo-esqueléticos e integrar a trabajadores con limitaciones físicas, psíquicas o de comunicación en entornos de trabajo caracterizados por una elevada repetitividad de movimientos, como ocurre, por ejemplo, en las líneas de ensamblaje., [EN] Job rotation allows workers to vary their tasks and the time employed in each one of them, facilitating the change of the muscular groups used and the progressive incorporation of workers with musculoskeletal disorders. With the job rotation is possible to assign workers to workstations compatible with their limited capacities and to restrict the time that they are exposed to risk factors to which they are especially sensible. This paper presents the application of DPI-ASEPEYO algorithm, to the design of Job Rotation schedules to prevent musculoskeletal disorders and to integrate workers with physical, psychic or communication limitations in environs characterized by high repetitive movements as it happens, for example, in assembly lines., Agradecemos a la Universidad Politécnica de Valencia su apoyo a esta investigación a través de su Programa de Apoyo a la Investigación y Desarrollo 2009 y su financiación a través de los proyectos PAID-06-09/2902 y PAID-05-09/4215.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards a methodology for identifying path dependence in the evolution of human resources practices

  • Perello-Marin, M Rosario|||0000-0001-9183-0568
[EN] The path dependence approach seems to be well suited for analyzing certain decisions in human resources management. Within this paper, we will try to establish a framework for the application of an evolution model in human resources practices by using cladistics., This project has received funding from Universidad Politecnica de Valencia, by the Project “arquitectura de las practicas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence” (PAID-06-09-2850).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of different corn starches on microstructural, physical and sensory properties of gluten-free white sauces formulated with soy protein and inulin

  • Guardeño Expósito, Luis Miguel
  • Puig Gómez, Consuelo Ana
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Different corn starches were used to prepare gluten-free white sauces made with soy protein and inulin. A remarkable different microstructure between sauces made with modified or native starches was observed. The former were characterized by a packed matrix of swollen starch granules, while the latter showed a few starch granule remnants dispersed in a starch polymer protein inulin continuous phase. These microstructural differences were related to significant differences (P < 0.05) in the apparent viscosity values observed between sauces made with modified or native starches. Moreover, sauces made with waxy starches exhibited stable apparent viscosity values throughout refrigeration storage. Syneresis was negligible even in sauces made with native starch, proving the high water retention capacity of the soy protein inulin starch polymer matrix. In general, sauces made with modified starches had stable color parameters throughout storage and were preferred by consumers, which make them interesting in the development of this type of product., The authors are grateful for the "Formacion de Profesorado Universitario (FPU)" grant awarded to L.M. Guardeno by the Ministry of Science and Innovation of Spain and the economic support received from Universitat Politecnica de Valencia - project PAID-06-09-287 - and Generalitat Valenciana - project GV-2010/038.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

epiModel: A system to build automatically systems of differential equations of compartmental type-epidemiological models

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Sánchez-Sánchez, Almudena
  • Santonja, Francisco
In this paper we describe epiModel, a code developed in Mathematica that facilitates the building of systems of differential equations corresponding to type-epidemiological linear or quadratic models whose characteristics are defined in text files following an easy syntax. It includes the possibility of obtaining the equations of models involving age and/or sex groups. © 2011., This work has been partially supported by the FIS PI-10/01433, the Spanish Government MICINN and FEDER Grant MTM2009-08587 and the Universitat Politecnica de Valencia Grant PAID-06-09 (ref. 2588).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ecological notes in Mediterranean halophytes. Towards an integrative approach

  • Marius Nicusor, Grigore
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Vicente, Oscar|||0000-0001-5076-3784
[EN] In this work we try to propose an integrative manner in which halophytes could be ecologically approached. Taking into considerations many factors related to environmental conditions, as well as corresponding adaptations in halophytes, we can obtain a good picture of interrelationships established within a typical ecosystem., Supported by grants from the Spanish Ministry of Science and Innovation, with contribution from the European Regional Development Fund (project CGL2008–00438/BOS) to O.V., and from Polytechnic University of Valencia (programme ‘PAID-06–09’) to M. B. M.-N. G. acknowledges the support provided by COST Action FA0901 for his stay in Valencia in the frame of a Short Term Scientific Mission, and by the Romanian POSDRU/89/1.5/S/49944 project “Developing the innovation capacity and improving the impact of research through post-doctoral programmes”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transient analysis of the conventional filtered-x affine projection algorithm for active noise control

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
[EN] Affine projection (AP) algorithms have been proposed in recent years for use in active noise control systems. This is due to their potential high convergence speed along with their robustness and moderate computational cost. However, these algorithms can exhibit an excessive computational cost for high projection orders (just when higher convergence speed is achieved). Thus, computationally efficient versions of these algorithms have been proposed. For the particular case of the AP algorithms applied to active noise control, the use of the conventional filtered-x structure instead of the commonly used modified filtered-x method can be understood as an efficient strategy, since it needs fewer operations to update the adaptive filter coefficients. However, the use of this structure implies different algorithm behavior for the following two reasons: the signals needed in the coefficient updates do not correspond exactly to the AP algorithm and this structure introduces a delay between the update of the adaptive filter coefficients and its effect on the noise signal. In practice, this dual effect mainly affects convergence of the algorithms in the transient regime. This correspondence presents a mathematical model so that the transient behavior of the conventional filtered-x AP algorithm can be predicted from the reference signal statistics and algorithm parameters., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion TEC2009-13741, Generalitat Valenciana PROMETEO 2009/0013, Generalitat Valenciana GV/2010/027, and Universidad Politécnica de Valencia PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Homogenization Conditions on Physicochemical Properties of Chitosan-Based Film-Forming Dispersions and Films

  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Perdones Montero, Ángela
Film-forming dispersions (FFD) based on high molecular weight chitosan (CH) alone or in combination with oleic acid (OA) were prepared under different homogenization conditions (rotor-stator or rotor stator together with microfluidization at different pressures). Film-forming dispersions (FFD) were characterized in terms of particle size distribution, rheological properties, distribution and z-potential. In order to study the impact of the properties of the FFD on the casted films, the water vapour permeability, mechanical properties and microstructure of the dry films were evaluated. Results showed that micro- fluidization promoted significant changes in the size and surface charge of the FFD particles, which in turn had an impact on the rheological properties of the FFD. The changes were more marked with the increase in microfluidization pressure. As regards film properties, the higher the microfluidization pressure in the FFD, the lower the water vapour permeability values and the stiffer the CH-OA composite films. These results were explained by film microstructure, which was observed by SEM., The authors acknowledge the financial support provided by Universidad Politecnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educacion y Ciencia (Project AGL2007-65503).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation and Mechanistic Investigation of the Arrhythmogenic Role of the Late Sodium Current in Human Heart Failure

  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Cardona Urrego, Karen Eliana
  • Gómez García, Juan Francisco
  • Rajamani, Sridharan
  • Belardinelli, Luiz
Heart failure constitutes a major public health problem worldwide. The electrophysiological remodeling of failing hearts sets the stage for malignant arrhythmias, in which the role of the late Na + current (I NaL) is relevant and is currently under investigation. In this study we examined the role of I NaL in the electrophysiological phenotype of ventricular myocytes, and its proarrhythmic effects in the failing heart. A model for cellular heart failure was proposed using a modified version of Grandi etal. model for human ventricular action potential that incorporates the formulation of I NaL. A sensitivity analysis of the model was performed and simulations of the pathological electrical activity of the cell were conducted. The proposed model for the human I NaL and the electrophysiological remodeling of myocytes from failing hearts accurately reproduce experimental observations. The sensitivity analysis of the modulation of electrophysiological parameters of myocytes from failing hearts due to ion channels remodeling, revealed a role for I NaL in the prolongation of action potential duration (APD), triangulation of the shape of the AP, and changes in Ca 2+ transient. A mechanistic investigation of intracellular Na + accumulation and APD shortening with increasing frequency of stimulation of failing myocytes revealed a role for the Na +/K + pump, the Na +/Ca 2+ exchanger and I NaL. The results of the simulations also showed that in failing myocytes, the enhancement of I NaL increased the reverse rate-dependent APD prolongation and the probability of initiating early afterdepolarizations. The electrophysiological remodeling of failing hearts and especially the enhancement of the I NaL prolong APD and alter Ca 2+ transient facilitating the development of early afterdepolarizations. An enhanced I NaL appears to be an important contributor to the electrophysiological phenotype and to the dysregulation of [Ca 2+] i homeostasis of failing myocytes. © 2012 Trenor et al., This work was partially supported by the European Commission preDiCT grant (DG-INFSO-224381), by the Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica del Ministerio de Ciencia e Innovacion of Spain (TEC2008-02090), by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-09-2843, PAID-06-11-2002) de la Universidad Politecnica de Valencia, by the Direccion General de Politica Cientifica de la Generalitat Valenciana (GV/2010/078). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This work was also supported by Gilead Sciences Palo Alto. Dr. Rajamani and Dr. Belardinelli are employees of Gilead Sciences and have collaborated in the study design and manuscript preparation. No additional external funding received for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis factorial exploratorio para identificar las dimensiones subyacentes de los constructos de remuneración y participación

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Conci, Graziela
Los programas de alta implicación de los operarios se han clasificado tradicionalmente en 4 grandes categorías: formación, comunicación, remuneración y participación. La investigación reciente parece indicar que las propiedades psicométricas de los constructos de formación y comunicación son adecuadas. Sin embargo, un solo factor no parece representar de manera adecuada a los constructos de remuneración y participación. En esta comunicación partimos de un análisis factorial exploratorio y se propone una estructura de 3 factores para los programas de remuneración y para los de participación. Mediante un análisis confirmatorio de los datos de 105 casos de empresas españolas podemos observar que la bondad de ajuste del modelo es buena, pero el a de Cronbach de las escalas para la muestra española es bastante bajo y la varianza extraída y la fiabilidad compuesta son muy bajas, por lo que la validez discriminante de las escalas queda en entredicho. Nuestra conclusión es que no es posible representar los ítems de participación y remuneración de los cuestionaros tipo Lawler (2001) bajo un mismo constructo, debiendo ser usados de manera independiente cuando se incorporan a modelos de estructura., Este trabajo se ha realizado con la financiación del proyecto “arquitectura de las practicas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence” (PAID-06-09-2850) de la Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Micro-geographies of creative industries clusters in Europe: From hot spots to assemblages

  • Boix, Rafael
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
The aim of this paper is to provide basic stylized facts about the spatial patterns of location and co-location of clusters of creative industries in Europe. The research proposes a novel methodology for detailing the spatial delimitation of clusters, based on a geo-statistical algorithm and firm-based micro-data. The procedure is applied to a continuous space of 16 European countries and 15 creative industries in 2009. The investigation reveals that creative firms are highly clustered, and that clusters are concentrated in a creative belt stretching from the South of England to the South-east of Germany. These clusters are predominantly metro- politan, heterogeneous, cross borders, and may co-locate to form assemblages., The authors would like to thank the Spanish Ministry of Science and Innovation and the Universitat Politecnica de Valencia (Spain) for funding this research (ECO2010-17318 MICINN Project, Research Project no. 2677-UPV, and PAID2012-487-UPV). We also would like to thank the three anonymous referees by their valuable comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chitosan lemon essential oil coatings on storage-keeping quality of strawberry

  • Perdones Montero, Ángela
  • Sánchez González, Laura
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Film-forming dispersions (FFD) were prepared with 1% high molecular weight chitosan and 3% lemon essential oil and were submitted to two different homogenization treatments. The particle size and viscosity of the FFD were evaluated and stand-alone coatings were characterized in terms of water vapour permeability (WVP) and antimicrobial activity. The FFD were applied to cold-stored strawberries, cv. Camarosa, and the physicochemical properties, fungal decay and respiration rate of strawberries were determined throughout cold storage at 5 degrees C. The use of microfluidization to prepare chitosan-based FFD led to a significant reduction in the particle size and apparent viscosity of the dispersions, with no significant effect on the decrease in the WVP of the stand-alone coatings. Chitosan coatings did not show a significant effect in terms of the acidity, pH and soluble solid content of strawberries throughout storage. In contrast, coatings slowed down the respiration rate of samples when lemon essential oil was added to the FFD. Adding lemon essential oil enhanced the chitosan antifungal activity both in in vitro tests and during cold storage in strawberries inoculated with a spore suspension of Botrytis cinerea., The authors acknowledge the financial support provided by Conselleria de Empresa, Universidad y Ciencia (project GV/2010/082), Universitat Politecnica de Valencia (project PAID-06-09-2834) and Ministerio de Economia y Competitividad (project AGL2010-20694). Author A. Perdones is grateful to Universitat Politecnia de Valencia for a FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Random Hermite differential equations: Mean square power series solutions and statistical properties

  • Calbo Sanjuán, Gema
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
This paper deals with the construction of random power series solution of second order linear differential equations of Hermite containing uncertainty through its coefficients and initial conditions. Under appropriate hypotheses on the data, we establish that the constructed random power series solution is mean square convergent. We provide conditions in order to obtain random polynomial solutions and, as a consequence, random Hermite polynomial are introduced. Also, the main statistical functions of the approximate stochastic process solution generated by truncation of the exact power series solution are given. Finally, we apply the proposed technique to several illustrative examples comparing the numerical results with respect to those provided by other available approaches including Monte Carlo simulation. © 2011 Elsevier Inc. All rights reserved., This work has been partially supported by the Spanish M.C.Y.T. and FEDER grants MTM2009-08587, DPI2010-20891-C02-01 as well as the Universitat Politecnica de Valencia grant PAID-06-09 (Ref. 2588).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Edible films and coatings to prevent the detrimental effect of oxygen on food quality: Possibilities and limitations

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Oxygen has a deleterious effect on the quality of a wide variety of food products. The application of edible films and coatings to food products represents a new approach to solve this problem. Edible films and coatings can include antioxidant agents in their formulation and at the same time, they represent a barrier to oxygen, which results in a better preservation of quality. The water activity of the product, as well as the ambient relative humidity, determines the antioxidant effect of films and coatings. This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings.Highlights ► The deleterious effect of oxygen on food quality can be controlled with edible films and coatings containing antioxidants. ► The action of these involves the oxygen barrier effect and the specific activity of the incorporated antioxidant agents. ► The efficiency of edible films and coatings is greatly affected by the water availability in the film. ► This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An entropic picture of emergent quantum mechanics

  • Acosta Iglesias, Dagoberto
  • González-Santander Martínez, Juan Luis
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Isidro, J.M.|||0000-0002-0720-9945
Quantum mechanics emerges à la Verlinde from a foliation of 3 by holographic screens, when regarding the latter as entropy reservoirs that a particle can exchange entropy with. This entropy is quantized in units of Boltzmann's constant k B. The holographic screens can be treated thermodynamically as stretched membranes. On that side of a holographic screen where spacetime has already emerged, the energy representation of thermodynamics gives rise to the usual quantum mechanics. A knowledge of the different surface densities of entropy flow across all screens is equivalent to a knowledge of the quantum-mechanical wavefunction on 3. The entropy representation of thermodynamics, as applied to a screen, can be used to describe quantum mechanics in the absence of spacetime, that is, quantum mechanics beyond a holographic screen, where spacetime has not yet emerged. Our approach can be regarded as a formal derivation of Planck's constant ¿ from Boltzmann's constant k B. © 2012 World Scientific Publishing Company., J.M.I. thanks Max-Planck-Institut fur Gravitationsphysik, Albert-Einstein-Institut (Golm, Germany), for hospitality extended a number of times over the years. This work has been supported by Universidad Politecnica de Valencia under grant PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene

  • Peydro, M. A.|||0000-0002-8503-1505
  • Parres, F.|||0000-0002-1083-9526
  • Crespo, J.E|||0000-0003-1372-4289
  • Navarro Vidal, Raúl
Recovery of recycled acrylonitrile-butadiene-styrene (ABS) through mixing with styrene-ethylene/butylene-styrene (SEBS) has been studied in this paper. To simulate recycled ABS, virgin ABS was processed through 5 cycles, at extreme processing temperatures, 220 degrees C and 260 degrees C. The virgin ABS, the virgin SEBS, the recycled ABS and the mixtures were mechanically, thermally and rheologically characterized after the various cycles of reprocessing in order to evaluate their corresponding properties and correlate them with the number of cycles undergone. With these data and using Computer Aided Engineering (CAE) the injection process was simulated by obtaining the optimal injection process parameters. Mixtures were injected at two temperatures in a sensorised mold correlating the shrinkage of the parts with temperature. The results show that tensile strength of ABS remains practically constant as the number of reprocessing cycles increases, while in the material injected with SEBS the tensile strength decreases. Concerning the Charpy notched impact strength; the values of the ABS reprocessed at 220 degrees C remain more or less unchanged, while the values for 260 C show a significant decrease. The adhesion of the SEBS causes, in both cases, an increase in impact strength. DSC techniques enabled us to observe how the glass transition temperature (T-g) remains more or less constant regardless of the number of cycles or the temperature, whereas the crosslinking is much greater in the samples reprocessed at 260 C. Finally, the viscosity decreases with each cycle and this decrease becomes even more noticeable with the addition of SEBS, and also that the parts molded at lower temperatures have less shrinkage. (c) 2013 Elsevier B.V. All rights reserved., We would like to thank the Vice-Directorate of Research, Development and Innovation of the Polytechnic University of Valencia for the help granted to the project: "Ternary systems research applied to polymeric materials for the upgrading of waste styrene", Ref: 20091056 within the program of First Projects of Investigation (PAID 06-09) where this work is framed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving parameter estimates obtained from thermal response tests: Effect of ambient air temperature variations

  • Bandos, Tetyana
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] This paper presents a method of subtracting the effect of atmospheric conditions from thermal response test (TRT) estimates by using data on the ambient air temperature. The method assesses effective ground thermal conductivity within 10% of the mean value from the test, depending on the time interval chosen for the analysis, whereas the estimated value can vary by a third if energy losses outside the borehole are neglected. Evaluating the same test data using the finite line-source (FLS) model gives lower values for the ground thermal conductivity than for the infinite line-source (ILS) model, whether or not heat dissipation to ambient air is assumed., This paper has been supported by the European Union Commission under projects GROUND-MED FP7-ENERGY-2007-2-TREN-218895, 043340, and Geotrainet - IEE/07/581; the Spanish Ministry of Education and Science under projects "Modelado y simulacion de sistemas energeticos complejos" (Programa Ramon y Cajal 2005) and ENE2008-00599/CON; by the Government of Valencia under project GV/2008/292; and by PAID-06-09/2734.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Seasonal variation in proline contents in several halophytes from a littoral salt marsh in Alicante (SE Spain)

  • Marius-NIcusor, Grigore
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Vicente, Oscar|||0000-0001-5076-3784
[EN] In the present study, we have investigated spatial and temporal changes in Pro levels in several monocotyledonous and dicotyledonous halophytes growing in a littoral salt marsh located near the city of Alicante (SE Spain)., Supported by grants from the Spanish Ministry of Science and Innovation, with contribution from the European Regional Development Fund (project CGL2008–00438/BOS) to O.V., and from Polytechnic University of Valencia (programme ‘PAID-06–09’) to M.B. M.-N.G. acknowledges the support provided by COST Action FA0901 for his stay in Valencia in the frame of a Short Term Scientific Mission, and by the Romanian POSDRU/89/1.5/S/49944 project “Developing the innovation capacity and improving the impact of research through post-doctoral programmes”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MATLAB GUI for computing Bessel functions using continued fractions algorithm, GUI Matlab para o cálculo de funções de Bessel usando frações continuadas

  • Hernandez Vargas, E.
  • Commeford, K.
  • Pérez Quiles, María Jezabel
[EN] Higher order Bessel functions are prevalent in physics and engineering and there exist different methods to evaluate them quickly and efficiently. Two of these methods are Miller's algorithm and the continued fractions algorithm. Miller's algorithm uses arbitrary starting values and normalization constants to evaluate Bessel functions. The continued fractions algorithm directly computes each value, keeping the error as small as possible. Both methods respect the stability of the Bessel function recurrence relations. Here we outline both methods and explain why the continued fractions algorithm is more efficient. The goal of this paper is both (1) to introduce the continued fractions algorithm to physics and engineering students and (2) to present a MATLAB GUI (Graphic User Interface) where this method has been used for computing the Semi-integer Bessel Functions and their zeros., [PT] Funções de Bessel de ordem mais alta são recorrentes em física e nas engenharias, sendo que há diferentes métodos para calculá-las de maneira rápida e eficiente. Dois destes métodos são o algoritmo de Miller e o algoritmo de frações continuadas. O primeiro faz uso de valores iniciais e constantes de normalização arbitrários, enquanto o segundo o faz calculando cada valor diretamente, minimizando tanto quanto possível o erro. Ambos respeitam a estabilidade das relações de recorrência das funções de Bessel. Neste trabalho descrevemos ambos os métodos e explicamos a razão pela qual o algoritmo das frações continuadas é mais eficiente. O objetivo do artigo é (1) introduzir o algoritmo de frações continuadas para estudantes de física e das engenharias e (2) apresentar um GUI (Graphic User Interface) em Matlab no qual este método foi utilizado para calcular funções de Bessel semi-inteiras e seus zeros., The authors wish to thank the financial support received from the Universidad Politécnica de Valencia under grant PAID-06-09-2734, from the Ministerio de Ciencia e Innovación through grant ENE2008-00599 and specially from the Generalitat Valenciana under grant reference 3012/2009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A genetic algorithm for the design of job rotation schedules considering ergonomic and competence criteria

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • Andrés Romano, Carlos|||0000-0003-4453-4891
Job rotation is an organizational strategy increasingly used in manufacturing systems as it provides benefits to both workers and management in an organization. Job rotation prevents musculoskeletal disorders, eliminates boredom and increases job satisfaction and morale. As a result, the company gains a skilled and motivated workforce, which leads to increases in productivity, employee loyalty and decreases in employee turnover. A multi-criteria genetic algorithm is employed to generate job rotation schedules, with considering the most adequate employee-job assignments to prevent musculoskeletal disorders caused by accumulation of fatigue. The algorithm provides the best adequacy available between workers and the competences needed for performing the tasks. The design of the rotation schedules is based not only on ergonomic criteria but also on issues related to product quality and employee satisfaction. The model includes the workers' competences as a measure for the goodness of solutions. © 2011 Springer-Verlag., We thank the Universidad Politecnica de Valencia for its support of this research through its Research and Development Program 2009 and financing through the project PAID-06-09/2902. The Universidad Politecnica de Valencia has funded the translation of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Completeness in the Mackey topology

  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
Bonet and Cascales [Non-complete Mackey topologies on Banach spaces, Bulletin of the Australian Mathematical Society, 81, 3 (2010), 409-413], answering a question of M. Kunze and W. Arendt, gave an example of a norming norm-closed subspace N of the dual of a Banach space X such that mu(X, N) is not complete,where mu(X, N) denotes the Mackey topology associated with the dual pair aEuroX, NaEuro parts per thousand. We prove in this note that we can decide on the completeness or incompleteness of topologies of this form in a quite general context, thus providing large classes of counterexamples to the aforesaid question. Moreover, our examples use subspaces N of X* that contain a predual P of X (if exists), showing that the phenomenon of noncompleteness that Kunze and Arendt were looking for is not only relatively common but illustrated by "well-located" subspaces of the dual. We discuss also the situation for a typical Banach space without a predual-the space c (0)-and for the James space J., The first author is supported in part by MICINN and FEDER (project no. MTM2008-05396), by Fundacion Seneca (project no. 08848/PI/08), by Generalitat Valenciana (GV/2010/036), and by Universitat Politecnica de Valencia (project no. PAID-06-09-2829). The second author is supported in part by MICINN project no. MTM2011-22417, by Generalitat Valenciana (GV/2010/036), and by Universidad Politecnica de Valencia (project no. PAID-06-09-2829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

User effect comparison between metal bezel antenna and planarinverted f-antenna for mobile terminal

  • Sonkki, Marko
  • Berg, M.
  • Salonen, E. T.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
This article presents a novel metal bezel antenna structure and its performance in user vicinity. The antenna is designed by keeping in mind the insensitivity in usage environments. In the antenna structure, a mobile chassis and a bezel are combined as one antenna element. Symmetrical feeding is used to excite the antenna. The characteristics of the metal bezel are compared with those of a conventional planar inverted-F antenna in terms of user effect at E-GSM band (880-960 MHz). Both antennas are measured and compared with four different hand phantom grips representing a browsing mode. The grips are designed so that the chassis is under the hand phantom in different variable usage conditions. Results are compared in terms of S-11, total efficiency, total body loss, radiation efficiency, reflection loss, and in Smith chart presentation. Finally, antenna structures are compared with hand and head phantom measurements representing a calling mode. The comparison is done in terms of average total body loss. The used hand grips are the same as in the case of the hand phantom measurements., This work was supported by the Finnish Funding Agency for Technology and Innovation, Nokia Devices Oulu, Pulse Finland, and Universitat Politecnica de Valencia under project PAID-06-09-2868. The first author M. Sonkki would like to thank the Tauno Tonning Foundation and Universitat Politecnica de Valencia for financially supporting his research exchange in Valencia. He also wants to thank iTEAM laboratory engineers Antonio Vila-Jimenez and Bernardo Bernardo for helping with practical problems and manufacturing the prototype antenna.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Brain oscillations in a random neural network

  • Acedo Rodríguez, Luis
  • Moraño Fernández, José Antonio|||0000-0003-4385-7277
[EN] It is well-known that rhythmic patterns of neural activity appear both in the normal and abnormal function of the brain. Apart from the standard bands of electric oscillations found in the electroencephalogram (EEG): from alpha (8-12 Hz) to delta waves (1-4 Hz), synchronized firing of neural populations characterize some complex cognitive functions such as memory, attention and consciousness. In the case of electrocardiogram (ECG) it is usually recognized that oscillations can be understood as the limit cycle of an underlying non-linear process in heart dynamics. However, the situation is not so clear for EEG and the origin and purpose of neural oscillations are still the subject of a heated debate. Our model is a version of the standard SIRS model from epidemiology in which susceptible, infected and recovered sites represent quiescent, firing and refractory neurons, respectively. Here we show that, in a SIRS random network epidemic model for neural activity, self-sustained oscillations appear in a restricted parameter region of the transition probabilities. This could explain the role of synchronized oscillations as a discriminant process for internal or external stimuli in brain dynamics. (C) 2011 Elsevier Ltd. All rights reserved., This work was supported by grant from the Universidad Politecnica de Valencia PAID-06-09 ref: 2588 and FIS Research Grant PI10/01433 from the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Planar Wideband Antenna Element and its Usage in a Mobile MIMO System

  • Sonkki, Marko
  • Salonen, E.T.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
A simple antenna structure for a multiple-input-multiple-output (MIMO) system in a mobile terminal with spatial diversity is presented. A single antenna element consists of a combination of an electric dipole and a square magnetic slot. The studies with a single quasi-complementary antenna element show that the electric dipole and the square-shaped magnetic slot are partially compensating the effect of the electric conductor closely spaced to the electric dipole (0.0037-0.01¿). Simulations also show that by scaling antenna structure, a 0.7-2.1-GHz frequency bandwidth can be achieved. The measured -6-dB impedance bandwidth of the MIMO antenna prototype is from 2.0 to 5.6 GHz, corresponding to a 95% relative bandwidth. The measured S 21 is less than -19 dB within the -6-dB impedance bandwidth. The average measured total efficiency at the aforementioned bandwidth is -0.85 dB. The measured radiation patterns are presented at 2 and 5 GHz with a maximum total gain of 2.8 and 5.7 dBi, respectively. The measured envelope correlation of the MIMO antenna is less than 0.04 with 90% MIMO efficiency within the -6-dB impedance bandwidth. © 2002-2011 IEEE., This work was supported by the Finnish Funding Agency for Technology and Innovation, Nokia Devices Oulu, Pulse Finland, and Universitat Politecnica de Valencia under Project PAID-06-09-2868. The work of M. Sonkki was supported by the Tauno Tonning Foundation and Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Label-free antibody detection using band edge fringes in SOI planar photonic crystal waveguides in the slow-light regime

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Griol Barres, Amadeu
  • Maquieira, Angel|||0000-0003-4641-4957
  • Toccafondo, Veronica
  • Garcia Castello, Javier
  • Peransi-Llopis, Sergio
[EN] We report experimental results of label-free anti-bovine serum albumin (anti-BSA) antibody detection using a SOI planar photonic crystal waveguide previously bio-functionalized with complementary BSA antigen probes. Sharp fringes appearing in the slow-light regime near the edge of the guided band are used to perform the sensing. We have modeled the presence of these band edge fringes and demonstrated the possibility of using them for sensing purposes by performing refractive index variations detection, achieving a sensitivity of 174.8 nm/RIU. Then, label-free anti-BSA biosensing experiments have been carried out, estimating a surface mass density detection limit below 2.1 pg/mm(2) and a total mass detection limit below 0.2 fg., This work was funded by the European Commission, carried out within the FP7-ICT-223932- INTOPSENS project, and by Spanish MICINN under contracts TEC2008-06333 and CTQ2007-64735/BQU. Support from the Universidad Politécnica de Valencia through programs PAID-05-09 and PAID-06-09 and the Conselleria d Educació through program GV2010-031 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical solution of random differential initial value problems: Multistep methods

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Villafuerte, L.
This paper deals with the construction of numerical methods of random initial value problems. Random linear multistep methods are presented and sufficient conditions for their mean square convergence are established. Main statistical properties of the approximations processes are computed in several illustrative examples. Copyright © 2010 John Wiley & Sons, Ltd., Thanks to the anonymous reviewer whose comments greatly enhanced the paper. This work has been partially supported by the Spanish M.E.C. and FEDER grants MTM2009-08587 and TRA2007-68006-C02-02, the Universidad Politecnica de Valencia grant PAID-06-09 (ref. 2588) and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Do museums innovate in the conservation and restoration of artwork? Differences between countries, ¿Innovan los museos en la Conservación y Restauración de obras de arte? Diferencias entre países

  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
  • de-Miguel-Molina, María|||0000-0003-4264-8000
  • Hedderich, Bárbara
[EN] This paper examines the types of artwork restoration innovation that museums undertake, and how their knowledge bases influence these innovations. The study is based on a sample derived from a survey of 167 museums in 43 countries, with 90 of the museums having a restoration and conservation department. The sample selected for this paper includes 59 museums from nine countries: South Africa, the United States, Austria, Germany, Norway, Poland, Spain, Switzerland and the United Kingdom. Two important conclusions can be inferred from the results obtained in this paper. The first is that museums in these nine countries do innovate in the restoration and conservation of artwork. The second is that innovation performance, and the works that museums are able to restore, depend on the combination of symbolic, analytical and synthetic knowledge bases., [ES] Este artículo examina los tipos de innovación que llevan a cabo los museos en la restauración de obras de ar te, así como la influencia de las bases de conocimiento en dichas innovaciones. Los datos proceden de una encuesta respondida por 167 museos de 43 países, de los que 90 tienen departamento de conservación y restauración. La muestra para este artículo incluye a 59 museos de 9 países: Sudáfrica, Estados Unidos, Austria, Alemania, Noruega, Polonia, España, Suiza y Reino Unido. El artículo ofrece dos conclusiones importantes. La primera es que los museos de estos nueve países innovan en la restauración y conservación de obras de arte. La segunda, que los resultados de la innovación, así como los trabajos que los museos restauran o son capaces de restaurar, dependen de la combinación de las bases de conocimiento simbólica, analítica y sintética. Esta segunda conclusión representa un avance importante en el análisis de las industrias creativas y culturales, en las que el conocimiento simbólico es visto como una característica distintiva., The authors would like to thank the Ministry of Science and Innovation and the Universitat Politècnica de València (Spain) for supporting this research financially (ECO2010-17318 MICINN Project, conducted by José-Luis Hervás-Oliver; Research Project n. 2677-UPV, conducted by Blanca de-Miguel-Molina; PAID2012-487-UPV, conducted by Blanca deMiguel-Molina)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mass Transfer and Volume Changes in French Fries During Air Frying

  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Argüelles Foix, Angel Luís|||0000-0001-5320-7011
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
The production of healthier fried foods requires the adaptation of industrial processes. In this context, air frying is an alternative to deep oil frying to obtain French fries with lower fat content. Kinetic analysis of compositional changes and main fluxes involved in air frying were carried out, and the results were compared to those obtained for deep oil frying. The influence of the type of sample (unpretreated, frozen, or blanched potatoes) was also analyzed. The results showed that oil uptake is much lower in air frying although a much longer processing time is required. Also, water loss and thus the loss of volume were much higher in air frying compared to the conventional process., The authors would like to thank the Universitat Politecnica de Valencia (PAID-06-09-2876) for the financial support given to this investigation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A parametric study of optimum road frame bridges by threshold acceptance

  • Perea de Dios, Cristian
  • PEREA DE
  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
  • Gonzalez Vidosa, Fernando
[EN] This paper examines the economic optimization of reinforced concrete road frame bridges by threshold acceptance. The formulation of the problem includes 50 discrete variables: three geometrical ones, three types of concrete and 44 reinforcement bars and bar lengths. Design loads are in accordance with the national codes for road bridges. An internal matrix method program computes the stress resultants and envelopes of the frame bridges. The evaluation module includes the ultimate limit state of fatigue plus other commonly specified limit states of service and ultimate flexure, shear and deflections. Solutions are evaluated following the Spanish code for structural concrete. This study reviews the main factors affecting the design of frame bridges. The study then presents a parametric study of commonly used road frame bridges from 8 to 16 m in horizontal span for different fills and earth covers conditions. The evolution of the total, concrete and steel cost is examined with regard to the key parameters, resulting in practical rules of thumb for optimum frames. Finally, it is shown that the steel-to-concrete cost has a fair influence on the characteristics of the optimum road frame bridges., Tha authors would like to acknowledge the support of the Generalitat Valenciana (research project GV/2010/086) and the Universidad Politécnica de Valencia (research project PAID-06-09), as well as the thorough revision of the manuscript by Dr Debra Westall.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On a classical renorming construction of V. Klee

  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
  • Zizler, Vaclav
We further develop a classical geometric construction of V. Klee and show, typically, that if X is a nonreflexive Banach space with separable dual, then X admits an equivalent norm vertical bar . vertical bar which is Frechet differentiable, locally uniformly rotund, its dual norm vertical bar . vertical bar* is uniformly Gateaux differentiable, the weak* and the norm topologies coincide on the sphere of (X*, vertical bar . vertical bar*) and, yet, vertical bar . vertical bar* is not rotund. This proves (a stronger form of) a conjecture of V. Klee. (C) 2011 Elsevier Inc., Supported in part by a grant AVOZ 101 905 03 and IAA 100190901 (Czech Republic).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Bishop-Phelps-Bollobás property for numerical radius in l(1)(C)

  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Kozhushkina, Olena
We show that the set of bounded linear operators from X to X admits a Bishop Phelps Bollobas type theorem for numerical radius whenever X is l(1)(C) or c(0)(C). As an essential tool we provide two constructive versions of the classical Bishop-Phelps-Bollobas theorem for l(1)(C)., The research of the first named author was supported in part by MICINN and FEDER (project MTM2011-25377), by Fundacion Seneca (project 08848/PI/08), by Generalitat Valenciana (GV/2010/036), and by Universidad Politecnica de Valencia (project PAID-06-09-2829). The research of the second named author is supported by Kent State University
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accuracy of analytical-numerical solutions of the Michaelis-Menten equation

  • Gonzalez-Parra, G.
  • Acedo Rodríguez, Luis
  • Arenas, A.
[EN] It is the aim of this paper to investigate a suitable approach to compute solutions of the powerful Michaelis-Menten enzyme reaction equation with less computational effort. We obtain analytical-numerical solutions using piecewise finite series by means of the differential transformation method, DTM. In addition, we compute a global analytical solution by a modal series expansion. The Michaelis-Menten equation considered here describes the rate of depletion of the substrate of interest and in general is a powerful approach to describe enzyme processes. A comparison of the numerical solutions using DTM, Adomian decomposition and Runge-Kutta methods is presented. The numerical results show that the DTM is accurate, easy to apply and the obtained solutions retain the positivity property of the continuous model. It is concluded that the analytic form of the DTM and global modal series solutions are accurate, and require less computational effort than other approaches thus making them more convenient., Authors are grateful to the reviewers for their helpful comments and suggestions. Luis Acedo acknowledges financial support from the grant PAID-06-09 ref: 2588 of the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selección de plataformas para el trabajo colaborativo en grupos deslocalizados: formulación del problema

  • Marín García, María Teresa
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Perello-Marin, M Rosario|||0000-0001-9183-0568
  • García Sabater, Julio Juan|||0000-0001-9449-1709
[ES] Determinadas decisiones de gestión de operaciones están caracterizadas por elegir un conjunto de herramientas complementarias para desarrollar diferentes funciones. Sin duda, esto es una decisión multicriterio, pero con la particularidad de que no se sabe si lo mejor es elegir una herramienta o un conjunto de ellas. En este trabajo vamos a abordara un problema simplificado y se identifican varios casos concretos, donde se han tomado decisiones basadas en el juicio de expertos y se planteará la aplicación de la metodología proponiendo la formulación matemática del problema. En el futuro, se podrá comparar las propuestas del modelo con las propuestas de expertos humanos y analizar los resultados a medio y largo plazo., Este trabajo se ha realizado con la financiación del proyecto “arquitectura de las practicas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence” (PAID-06-09-2850) de la Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interaction of Specialized Cardiac Conduction System With Antiarrhythmic Drugs: A Simulation Study

  • Dux-Santoy Hurtado, Lydia
  • Sebastián Aguilar, Rafael
  • Felix-Rodriguez, Jose
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] The use of antiarrhythmic drugs is common to treat heart rhythm disorders. Computational modeling and simulation are promising tools that could be used to investigate the effects of specific drugs on cardiac electrophysiology. In this paper, we study the multiscale effects of dofetilide, a drug that blocks IKr, from cellular to organ level paying special attention to its effect on heart structures, in particular the specialized cardiac conduction system (CCS). We include a model of the CCS in a patient-specific anatomical ventricular model and study the drug effects in simulations with and without a CCS. Results confirmed the expected effects of dofetilide at cellular level, increasing the action potential duration, and at organ level, prolonging the QT segment. Notable differences are shown between models with and without the CCS on action potential duration distributions. These techniques show the importance of heart heterogeneity and the global effects of the interaction of drugs with cardiac structures. © 2006 IEEE., This work was supported in part by the Ministry of Science and Innovation, TEC-2008-02090 (FPI grant BES-2009-016071), in part by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-09-2843) de la Universitat Politecnica de Valencia, and in part by the Direccion General de Politica Cientifica de la Generalitat Valenciana (GV/2010/078). Asterisk indicates corresponding author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In order to evaluate the impact of chitosan on the physical properties of wheat starch-glycerol films, part of the wheat starch was replaced by chitosan, and the effect of composition on the properties of both the films and the film-forming dispersions was studied. The latter became more stable and viscous as the chitosan proportion was increased in the mixture. Both polymers appeared to integrate homogeneously in the film matrix. The combined effect of the glycerol and chitosan proportions affected the mechanical and barrier properties of the films. The tensile strength and elastic modulus of the films were improved as chitosan ratio increased. The oxygen and water vapor permeability slightly increased in line with the amount of chitosan in the blend although the induced differences were very small. Chitosan ratio directly affected the antimicrobial properties of the films, which showed a significant bactericide activity when the chitosan-starch ratio in the film was 50%. Nevertheless, at a starch:chitosan ratio of 80:20, counts of coliforms did not exceed the initial value in the meat after 7 storage days., The authors acknowledge the financial support from Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2010-20694 and Universidad Politecnica de Valencia (projects PAID-06-09-2834 and PAID-06-11-2013). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model of the expansion process for R245fa in an Organic Rankine Cycle (ORC)

  • Luján, José M.|||0000-0001-6133-8943
  • Serrano, J.R.|||0000-0003-0692-3917
  • Dolz, Vicente|||0000-0003-1511-6957
  • Sánchez Serrano, Jaime
An Organic Rankine Cycle (ORC) is considered as one of the most environmental-friendly ways to convert different kinds of low temperature energies, i.e. solar, geothermal, biomass and thermal energy of exhaust gases into electrical energy. Two important facts about the ORC must be considered: An organic fluid is selected as the working fluid and a high expansion ratio is usually presented in the machinery due to thermodynamic and efficiency factors. In the past, the pre-design of turbomachinery has been based on the usage of ideal fluid laws, but the real gas effects have a significant influence in the ORC working condition, due to its proximity to the saturation vapor line. In this article, the Equations of State (EoS) (Ideal gas, Redlich-Kwong-Soave and Peng-Robinson) have been evaluated in a typical ORC expansion in order to observe the inaccuracies of the ideal gas model with different thermodynamic variables. Finally an isothermal process followed by an isochoric process is proposed to reproduce the thermodynamic process of the organic fluid expansion by means of simpler equations. In the last point of this paper, several examples of this expansion process have been calculated, in order to analyze the proposed methodologies. It has been concluded that in typical expansion process of ORC (2.5 MPa-0.1 MPa and 1.6MPa-0.1MPa), the PR and RKS equations show deviations between 6% and 8% in specific energy. These deviations are very low compared with the ideal gas equation whose deviations are above 100 %., This work was partially funded by the "Programa de Formacion de Profesorado Universitario (F.P.U)", "Programa de Apoyo a la Investigacion y Desarrollo de la Universidad Politecnica de Valencia 2010", "Proyectos I+D para grupos de investigacion emergentes 2011" and "Programa de apoyo a la investigacion y desarrollo de la U.P.V (PAID-06-09)". The authors thanks to R. Gatzweiler for his help to improve the English grammar.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Random mixed hyperbolic models: Numerical analysis and computing

  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villafuerte, L.
This paper deals with the construction of reliable numerical solutions of mixed problems for hyperbolic second order partial differential models with random information in the variable coefficients of the partial differential equation and in the initial data. Using random difference schemes a random discrete eigenfunctions method is developed in order to construct a discrete approximating stochastic process. Mean square consistency of the random difference scheme is treated and mean square stability of the numerical solution is studied and illustrated with examples. Statistical moments of the numerical solution are also computed., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-08587, DPI2010-20891-C02-01, Universidad Politecnica de Valencia grant PAID06-09-2588 and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplicative structures of hypercyclic functions for convolution operators

  • Bernal-González, L.
  • Costakis, G.
  • Seoane-Sepúlveda, J.B.
  • Conejero, J. Alberto|||0000-0003-3681-7533
[EN] In this note, it is proved the existence of an infinitely generated multiplicative group consisting of entire functions that are, except for the constant function 1, hypercyclic with respect to the convolution operator associated to a given entire function of subexponential type. A certain stability under multiplication is also shown for compositional hypercyclicity on complex domains., The first author has been supported by the Plan Andaluz de Investigacion de la Junta de Andalucia FQM-127 Grant P08-FQM-03543 and by MEC Grant MTM2015-65242-C2-1-P. The second author has been supported by MEC Grant MTM2016-75963-P. The second and third authors were also supported by Generalitat Valenciana, Project GV/2010/091, and by Universitat Politecnica de Valencia, Project PAID-06-09-2932. The fourth author has been supported by Grant MTM2015-65825-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Convex combination filtered-X algorithms for active noise control systems

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
Adaptive filtering schemes exhibit a compromise between convergence speed and steady-state mean square error. Trying to overcome this trade-off, convex combination of adaptive filters have been recently developed for system identification achieving better performance than traditional approaches. The purpose of this work is to apply the convex combination strategy to single-channel and multichannel active noise control systems. In these systems it is necessary to take into account the secondary path between the adaptive filter output and the error sensor and the possible unavailability of the disturbance signal, which depends on the filtering scheme considered. Even though this strategy involves a higher computational burden than the classic adaptive filters, it exhibits a good performance in terms of convergence speed and steady-state mean square error., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion TEC2009-13741, Generalitat Valenciana PROMETEO 2009/0013, Generalitat Valenciana GV/2010/027, and Universitat Politecnica de Valencia PAID-06-09. The associate editor coordinating the review of this manuscript and approving it for publication was Prof. Boaz Rafaely.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolution of mechanical and optical properties of french fries obtained by hot air-frying

  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Argüelles Foix, Angel Luís|||0000-0001-5320-7011
  • Andrés Grau, Ana María|||0000-0002-6132-3167
The aim of this study was to analyse the influence of frying technique (air-frying and deep oil-frying) and type of pre-treatment (freezing and blanching) on the evolution of mechanical and optical properties of French fries. The results showed that the chromatic parameters, a* and b*, experimented an increase regardless of the frying method. The increase in a* was significantly higher in deep-oil frying as a result of Maillard's reactions. The texture analysis reported a first stage of initial softening related to starch gelatinization followed by a second stage where the maximum force increased due to the gradual formation of a crust, both stages being faster in deep-oil frying. Pre-frozen potatoes presented the highest value of maximum force parameter independent of the type of frying, Authors would like to thank to the Universitat Politecnica de Valencia (PAID-06-09-2876) for the financial support given to this investigation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heuristic optimization of reinforced concrete road vault underpasses

  • Carbonell Lombardero, Alfonso
  • Gonzalez Vidosa, Fernando
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper aims at the automatic design and cost minimization of reinforced concrete vaults used in road construction. This paper presents three heuristic optimization methods: the multi-start global best descent local search (MGB), the meta-simulated annealing (SA) and the meta-threshold acceptance (TA). Penalty functions are used for unfeasible solutions. The structure is de¿ned by 49 discrete design variables and the objective function is the cost of the structure. All methods are applied to a vault of 12.40 m of horizontal free span, 3.00 m of vertical height of the lateral walls and 1.00 m of earth cover. This paper presents two original moves of neighborhood search and an algorithm for the calibration of SA-TA algorithms. The MGB algorithm appears to be more ef¿cient than the SA and the TA algorithms in terms of mean results. However, the SA outperforms MGB and TA in terms of best results. The optimization method indicates savings of about 10% with respect to a traditional design. (C) 2011 Elsevier Ltd. All rights reserved., This study was partially funded by the Universidad Politecnica de Valencia (Research Project PAID-06-09) and by the Generalitat Valenciana (Research Project GV/2010/086). The authors are grateful for the thorough revision of the manuscript by Ms. ha Wallon.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A method to design job rotation schedules to prevent work-related musculoskeletal disorders in repetitive work

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • Cremades Oliver, L.V.
  • González-Cruz, María-Carmen
Job rotation is an organisational strategy widely used in human-based production lines with the aim of preventing work-related musculoskeletal disorders (WMSDs). These work environments are characterised by the presence of a high repetition of movements, which is a major risk factor associated with WMSDs. This article presents a genetic algorithm to obtain rotation schedules aimed at preventing WMSDs in such environments. To do this, it combines the effectiveness of genetic algorithms optimisation with the ability to evaluate the presence of risk by repeated movements by following the OCRA ergonomic assessment method. The proposed algorithm can design solutions in which workers will switch jobs with high repeatability of movements with other less demanding jobs that support their recovery. In addition, these solutions are able to diversify the tasks performed by workers during the day, consider their disabilities and comply with restrictions arising from the work organisation., The authors wish to thank the Universitat Politecnica de Valencia which supported this research through its Program for the Support of Research and Development 2009 and its financing through the project PAID-06-09/2902.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exact solution for the time-dependent temperature field in dry grinding: application to segmental wheels

  • González-Santander Martínez, Juan Luis
  • Valdes Placeres, J. M.
  • Isidro, J.M.|||0000-0002-0720-9945
We present a closed analytical solution for the time evolution of the temperature field in dry grinding for any time-dependent friction profile between the grinding wheel and the workpiece. We base our solution in the framework of the Samara-Valencia model Skuratov et al., 2007, solving the integral equation posed for the case of dry grinding. We apply our solution to segmental wheels that produce an intermittent friction over the workpiece surface. For the same grinding parameters, we plot the temperature fields of up- and downgrinding, showing that they are quite different from each other. © 2011 J. L. Gonzlez-Santander et al., The authors wish to thank the financial support received from Generalitat Valenciana under Grant GVA 3012/2009 and from Universidad Politecnica de Valencia under Grant PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Different Rice Starches, Inulin, and Soy Protein on Microstructural, Physical, and Sensory Properties of Low-Fat, Gluten, and Lactose Free White Sauces

  • Guardeño Expósito, Luis Miguel
  • Vázquez Gutiérrez, José Luis
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] The microstructural, physical, and sensory properties of low-fat sauces made with different rice starches, soy protein ,and inulin were analysed in order to obtain sauces suitable for celiac and lactose intolerant consumers. Soy protein and inulin could prevent starch degradation due to their high water-binding capacity. Moreover, protein molecules could diffuse into the starch granules and soluble inulin could interact with starch polymers within the granule. Both effects would hinder amylose leaching. Inulin provides better diffusion capacity of gelatinised granules and soy protein-starch granule aggregates than sunflower oil, which helps to decrease viscosity in modified rice starch sauces. Soy protein prevents synaeresis in the sauces. Inulin affects colour parameters in native rice starch sauces, probably because of inulin and retrograded amylose polymers interactions. Sauces made with sunflower oil and modified rice starch are best rated by consumers. However, according to the statistical analyses, the replacement of oil by inulin could be suitable to prepare low-fat, gluten, and lactose free white sauces when modified rice starch is used., Supported by the Universitat Politecnica de Valencia, Project No. PAID-06-09-2871, and Generalitat Valenciana, Project GV-2010/038.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Tool to Perform Global Energy Balances in DI Diesel Engines 2014-01-0665

  • Payri, F.|||0000-0002-3314-4911
  • Olmeda, P.|||0000-0002-3161-0165
  • Martín, Jaime|||0000-0002-0496-3176
  • Carreño, Ricardo
[EN] The generalization of exhaust aftertreatment systems along with the growing awareness about climate change is leading to an increasing importance of the efficiency over other criteria during the design of reciprocating engines. Using experimental and theoretical tools to perform detailed global energy balance (GEB) of the engine is a key issue for assessing the potential of different strategies to reduce consumption. With the objective of improving the analysis of GEB, this paper describes a tool that allows calculating the detailed internal repartition of the fuel energy in DI Diesel engines. Starting from the instantaneous in-cylinder pressure, the tool is able to describe the different energy paths thanks to different submodels for all the relevant subsystems. Hence, the heat transfer from gases to engine walls is obtained with specific convective and radiative models in the chamber and ports; the repartition of the heat flux throughout the engine metal elements towards the oil and coolant is estimated with a lumped capacitance model; finally, the ancillary systems and friction losses are obtained through specific semiempirical submodels. The validation of the tool is performed in a 4- cylinder DI Diesel engine instrumented to perform detailed experimental GEB. Finally, a simple analysis of combined internal and external analysis in the complete engine map shows the effect of operating conditions on each energy term. Thus it is demonstrated the utility of the proposed tool, that complements the experimental heat flow measurements in Diesel engine researches oriented to the reduction of energy consumption., The support of the Universitat Politècnica de València (PAID06-09) and Generalitat Valenciana (GV/2010/045) is greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparative study to the numerical approximation of random Airy differential equation

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
The aim of this paper is twofold. First, we deal with the extension to the random framework of the piecewise Fröbenius method to solve Airy differential equations. This extension is based on mean square stochastic calculus. Second, we want to explore the capability to provide not only reliable approximations for both the average and the standard deviation functions associated to the solution stochastic process, but also to save computational time as it happens in dealing with the analogous problem in the deterministic scenario. This includes a comparison of the numerical results with respect to those obtained by other commonly used operational methods such as polynomial chaos and Monte Carlo simulations. To conduct this comparative study, we have chosen the Airy random differential equation because it has highly oscillatory solutions. This feature allows us to emphasize differences between all the considered approaches. © 2011 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish M.C.Y.T. and FEDER grants MTM2009-08587, DPI2010-20891-C02-01 as well as the Universitat Politecnica de Valencia grant PAID-06-09 (Ref. 2588).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical solution of random differential models

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Company Rossi, Rafael|||0000-0001-5217-1889
  • Villafuerte Altuzar, Laura
This paper deals with the construction of a numerical solution of random initial value problems by means of a random improved Euler method. Conditions for the mean square convergence of the proposed method are established. Finally, an illustrative example is included in which the main statistics properties such as the mean and the variance of the stochastic approximation solution process are given. © 2011 Elsevier Ltd., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-08587, DPI2010-20891-C02-01, Universidad Politecnica de Valencia grant PAID06-09-2588 and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the thermal properties of Acrylonitrile Butadiene Styrene - High Impact Polystyrene blends with Styrene Ethylene Butylene Styrene

  • Peydro, M. A.|||0000-0002-8503-1505
  • Juárez Varón, David|||0000-0003-3251-8851
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Parres, F.|||0000-0002-1083-9526
[EN] A binary blend Acrylonitrile Butadiene Styrene ¿ High Impact Polystyrene (ABS-HIPS 50% wt) was prepared on a twin-screw extruder at 190-210 oC. The different properties were then analyzed using melt flow index (MFI), thermogravimetric analysis (TGA), and Fourier Transform Infrared spectroscopy (FTIR). FTIR analysis indicated heterogeneous distribution of the blend in injected pieces and SEM micrographs show heterogeneous distribution of both phase (ABS and HIPS). On the other hand, we have prepared ternary blends of ABS-HIPS-Styrene Ethylene Butylene Styrene (SEBS), varying the percentage of SEBS from 10 to 30 %wt using a twin screw extruder at 190-210oC. The addition of SEBS to the binary system (ABS-HIPS) allowed us to increase the ductile properties as well as reducing the viscosity., We would like to thank the Vice-Directorate of Research, Development and Innovation of the Polytechnic University of Valencia for the help granted to the project: “Ternary systems research applied to polymeric materials for the upgrading of waste styrene”, Ref: 20091056 within the program of First Projects of Investigation (PAID 06-09) where this work is framed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel humid electronic nose combined with an electronic tongue for assessing deterioration of wine

  • Gil Sánchez, Luís|||0000-0003-3453-5559
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
  • Ibáñez Civera, Francisco Javier|||0000-0002-1035-2662
  • Soto Camino, Juan
  • Llobet Valero, Eduard
We report herein the use of a combined system for the analysis of the spoilage of wine when in contact with air. The system consists of a potentiometric electronic tongue and a humid electronic nose. The potentiometric electronic tongue was built with thick-film serigraphic techniques using commercially available resistances and conductors for hybrid electronic circuits; i.e. Ag, Au, Cu, Ru, AgCl, and C. The humid electronic nose was designed in order to detect vapours that emanate from the wine and are apprehended by a moist environment. The humid nose was constructed using a piece of thin cloth sewn, damped with distilled water, forming five hollows of the right size to introduce the electrodes. In this particular case four electrodes were used for the humid electronic nose: a glass electrode, aluminium (Al), graphite and platinum (Pt) wires and an Ag-AgCl reference electrode. The humid electronic nose together with the potentiometric electronic tongue were used for the evaluation of the evolution in the course of time of wine samples. Additionally to the analysis performed by the tongue and nose, the spoilage of the wines was followed via a simple determination of the titratable (total) acidity. © 2011 Elsevier B.V., We thank the Spanish Government (project MAT2009-14564-C04) and the Generalitat Valenciana (project PROME-TEO/2009/016) for support. Luis Gil-Sanchez also thanks the Universidad Politecnica de Valencia for support (Primeros Proyectos de Investigacion - PAID-06-09) and the Generalitat Valenciana (proyectos de I+D para grupos de investigacion emergentes - 2009/8650).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recuperación de plásticos reciclados mediante adicción de elastómeros termoplásticos. Caracterización mecánica y térmica, Thermoplastic elastomer addition for recovering recycled plastics. Mechanical and thermal characterization

  • Peydro, M. A.|||0000-0002-8503-1505
  • Parres, F.|||0000-0002-1083-9526
  • Crespo, J.E|||0000-0003-1372-4289
  • Navarro Vidal, Raúl
[EN] Recovery of recycled acrylonitrile butadiene styrene (ABS) through mixing with styrene-ethylene/butylene-styrene (SEBS) has been studied in this paper. To simulate recycled ABS, virgin ABS was processed through 5 cycles, at extreme processing temperatures, 220 degrees C and 260 degrees C. The virgin ABS, the virgin SEBS, the recycled ABS and the mixtures were mechanically and thermally characterized after the various cycles of reprocessing in order to evaluate their corresponding properties and correlate them with the number of cycles undergone. The results show that tensile strength of ABS remains practically constant as the number of reprocessing cycles increases, while in the material injected with SEBS the tensile strength decreases. Concerning the Charpy notched impact strength, the values of the ABS reprocessed at 220 degrees C remain more or less unchanged, while the values for 260 degrees C show a significant decrease. The adhesion of the SEBS causes, in both cases, an increase in impact strength. DSC techniques enabled us to observe how the glass transition temperature (Tg) remains more or less constant regardless of the number of cycles or the temperature, whereas the crosslinking is much greater in the samples reprocessed at 260 degrees C. As conclusion, it is suggested that the people who works handling and dealing with plastic that, when possible, use low temperatures of transformation of ABS instead of high temperatures. It is also recommended to recycle the ABS to those who work with it; to use 5% of SEBS added to the recycled ABS to recover the possible loss of properties., [ES] En este trabajo se estudia la recuperación de un Acrilonitrilo-Butadieno-Estireno (ABS) reciclado mediante mezcla con Estireno-Etileno/ Butadieno-Estireno (SEBS). Para simular el ABS reciclado se ha reprocesado ABS virgen durante cinco ciclos a las dos temperaturas extremas de procesamiento, 220ºC y 260ºC. Los materiales ABS virgen, SEBS virgen, ABS reprocesado y las mezclas han sido caracterizados mecánica y térmicamente para evaluar sus propiedades correspondientes y correlacionarlo con el número de ciclos de proceso. Los resultados muestran que la resistencia a tracción del ABS se mantiene prácticamente constante conforme aumenta el número de ciclos de reprocesado, en cambio, disminuye al aditivarlo con SEBS. Con respecto a la resistencia al impacto, los valores del ABS reprocesado a 220ºC permanecen prácticamente inalterables, mientras que para el reprocesado a 260ºC disminuyen de forma notable. La adhesión de SEBS provoca, en ambos casos, un incremento de energía de impacto. Las técnicas de DSC han permitido observar como la temperatura de transición vítrea se mantiene prácticamente constante independientemente del número de ciclos o de la temperatura; en cambio, el efecto de entrecruzamiento de las moléculas (crosslinking) es mucho mayor para las muestra reprocesadas a 260ºC. Como conclusión, se recomienda a los transformadores de plástico que, en lo posible, utilicen temperaturas de transformación del ABS bajas en vez de altas. También se recomienda a los transformadores que recuperen ABS, que utilicen un 5% de SEBS para mejorar las propiedades., Nos gustaría agradecer a la Subdirección de Investigación, Desarrollo e Innovación de la Universitat Politècnica de Valencia la ayuda concedida al proyecto: “la investigación de sistemas ternarios aplicados a los materiales poliméricos para la mejora de residuos de estireno”, Ref.: 20091056 en el programa de los primeros proyectos de investigación (PAID 06-09), donde este trabajo es un fragmento.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model-driven decision support system for reallocation of supply to orders under uncertainty in ceramic companies

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Boza, Andres|||0000-0002-5429-0416
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
In ceramic companies, uncertainty in the tone and gage obtained in first quality units of the same finished good (FG) entails frequent discrepancies between planned homogeneous quantities and real ones. This fact can lead to a shortage situation in which certain previously committed customer orders cannot be served because there are not enough homogeneous units of a specificFG (i.e., with the same tone and gage). In this paper, a Model-Driven Decision Support System (DSS) is proposed to reassign the actual homogeneous stock and the planned homogeneous sublots to already committed orders under uncertainty by means of a mathematical programming model (SP-Model). The DSS functionalities enable ceramic decision makers to generate different solutions by changing model options. Uncertainty in the planned homogeneous quantities, and any other type of uncertainty, is managed via scenarios. The robustness of each solution is tested in planned and real situations with another DSS functionality based on another mathematical programming model (ASP-Model). With these DSS features, the ceramic decision maker can choose in a friendly fashion the orders to be served with the current homogeneous stock and the future uncertainty homogeneous supply to better achieve a balance between the maximisation of multiple objectives and robustness., This research has been carried out within the PLANGES-FHP Project framework funded by the Spanish Ministry of Economy and Competitiveness (Ref. DPI2011-23597), the Polytechnic University of Valencia (Ref. PAID-06-11/1840) and the ADENPRO-PJP project (Ref. UPV PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-Time and Low-Cost Sensing Technique Based on Photonic Bandgap Structures

  • García Castelló, Javier
  • Toccafondo, Veronica
  • Pérez Millán, Pedro
  • Sánchez Losilla, Nuria
  • Cruz, J. L.
  • Andres, M. V.
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A technique for the development of low-cost and high-sensitivity photonic biosensing devices is proposed and experimentally demonstrated. In this technique, a photonic bandgap structure is used as transducer, but its readout is performed by simply using a broadband source, an optical filter, and a power meter, without the need of obtaining the transmission spectrum of the structure; thus, a really low-cost system and real-time results are achieved. Experimental results show that it is possible to detect very low refractive index variations, achieving a detection limit below 2 x 10(-6) refractive index units using this low-cost measuring technique. (C) 2011 Optical Society of America[, This work was funded by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under contracts TEC2008-06333, JCI-009-5805, and TEC2008-05490. Support by the Universidad Politecnica de Valencia through program PAID-06-09 and the Conselleria d'Educacio through program GV-2010-031 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Morfología de tableros aligerados de canto constante postesados para puentes carreteros y ferroviarios, Post-stressed constant depth beam concrete road and railway bridge voided decks morphology

  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Gonzalez Vidosa, Fernando
[EN] In the work a study to statistically characterise 82 prestressed concrete bridge decks of real flyovers of constant depth are treated. The main objective of the study is to find design formulae with the least number of data so as to improve the preliminary design of this type of structures. The study performs an exploratory analysis and a multivariate analysis of the geometrical variables, the amount of materials and the cost far voided decks. The regression models have allowed predicting the depth of the deck as a function of the span and the externa/ void. The depth is the variable that better explains (51.9%) the cost per unit surface of the deck in road bridges, while for railway decks this variable only explains in the order of 23.4%, what implies more independent variables. The main span and the external void together with the infernal void of the road deck with the number of spa ns and the total length in the case of the railway deck are enough to find the preliminary design of the slab with reasonable accuracy for the economic assessment of the design, [ES] En el trabajo se aborda una caracterización estadística de una muestra de 82 tableros reales tipo losa pretensada de canto constante para carreteras y ferrocarriles. El objetivo principal es encontrar fórmulas de predimensionamiento con el mínimo número de datos posible que permita mejorar el diseño previo de estas estructuras.Para ello se ha realizado un análisis exploratorio y otro multivariante de las variables geométricas determinantes, de las cuantías de materiales y del coste de los tableros. Los modelos de regresión han permitido deducir que el canto queda bien explicado por la luz y el aligeramiento exterior. El canto es la variable que mejor explica el coste por unidad de superficie de tablero en losas para carreteras (51,9%), mientras que en las de ferrocarriles sólo lo explica en un 23,4%, por lo que se necesitan más variables para su explicación. La luz principal y los voladizos bastan para el diseño previo de losas para carreteras; si además se incluye el número de vanos y la longitud total, se pueden predimendionar las losas de ferrocarril, con errores razonables en la estimación económica., Los autores agradecen el apoyo de la Universidad Politécnica de Valencia (Proyecto PAID-06-09) y a la Generalitat Valenciana (Proyecto GV/2010/086).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CO2-Optimization Design of Reinforced Concrete Retaining Walls Based on a VNS-Threshold Acceptance Strategy

  • Yepes, V.|||0000-0001-5488-6001
  • Gonzalez Vidosa, Fernando
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Villalba Izquierdo, Pere
This paper presents one approach to a methodology to design reinforced concrete cantilever retaining walls for road construction using a hybrid multistart optimization strategic method based on a variable neighborhood search threshold acceptance strategy (VNS-MTAR) algorithm. This algorithm is applied to two objective functions: the embedded carbon dioxide (CO 2) emissions and the economic cost of reinforced concrete walls at different stages of materials production, transportation, and construction. The problem involved 20 design variables: four geometric variables (thickness of the stem and the base slab; toe and heel lengths), four material types, and 12 variables for the reinforcement setup. Results first indicate that embedded emissions and cost are closely related and that more environmentally friendly solutions than the lowest cost solution are available at a cost increment of less than 1.28%. The analysis also indicated that reducing costs by 1 Euro could save up to 2.28%kg in CO 2 emissions. Finally, the cost-optimized walls require approximately 4.8% more concrete than the best environmental ones, which need 1.9% more steel. © 2012 American Society of Civil Engineers., This work was supported by the Generalitat Valenciana (Research Project GV/2010/086) and by the Universitat Politecnica de Valencia (Research Project PAID-06-09). The authors are grateful to the anonymous reviewers for their constructive comments and useful suggestions. The authors are also grateful Dr. Debra Westall for her thorough revision of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical properties of chitosan-basil essential oil edible films as affected by oil content and homogenization conditions

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] This work studies the influence of basil essential oil, its content and the homogenization treatment on the physical properties of chitosan-based edible films. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF). Composite films were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed microcracks due to the weak interactions between chitosan and oil, which affected their mechanical behaviour. In pure chitosan films, MF significantly increased water vapour permeability. Homogenization treatment greatly affected this property. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of thermal conductivity from thermal response test for estimating steady-state temperatures in rock and stratified soil near a line source of heat

  • Bandos, Tetyana
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
This article addresses the influence of anisotropy of the ground on steady-state temperature in the surroundings of vertical borehole and effective thermal conductivity measured by a field thermal response test. This is a key parameter in the design of ground coupled heat pumps to heat and cool buildings. First, this article provides a brief overview of the current technique of estimating thermal conductivity from data obtained in a thermal response test based on predictions for temperature from a line source of heat in an isotropic ground. Then, the analytical solutions to the isotropic model for the ground are used to obtain the solutions to the anisotropic model for stratified medium. In addition, the article provides a new analytical exact solution for temperatures around a finite line source of heat penetrating anisotropic semi-infinite medium, in which the angle between the ground surface and the sedimentary strata is arbitrary. Approximate expressions for the temperature evolution during the test and for the steady-state temperature are presented. Such approximate expressions are also given for integral mean temperature for two special orientations of the strata. The limitations of the finite line source method in stratified medium and recommendations for layout of multiple vertical or horizontal ground coupled heat exchangers or waste canisters in repository rock are discussed. Copyright © 2011 American Society of Heating, Refrigerating and Air-Conditioning Engineers., This paper has been supported by the European Union Commission under project 043340, and Geotrainet-IEE/07/581; the Spanish Ministry of Education and Science under projects "Modelado y simulacion de sistemas energeticos complejos" (Programa Ramon y Cajal 2005) and ENE2008-00599/ CON; by the Government of Valencia under project GV/2008/292; and by PAID-06-09/2734.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Is implementation of continuous improvement possible? An evolutionary model of enablers and inhibitors

  • García Sabater, Julio Juan|||0000-0001-9449-1709
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Perello-Marin, M Rosario|||0000-0001-9183-0568
The purpose of this article is to present an evolutionary model of the enablers and inhibitors affecting the implementation and sustainability of continuous improvement. With this aim, a qualitative study using the grounded theory was carried out. Interviews were conducted with managers responsible for continuous improvement in first-tier suppliers in the automotive sector. As a result, two existing lines of research in the continuous improvement literature are synthesized: on one hand, the literature concerning the enablers and barriers associated with continuous improvement sustainability; and on the other, the literature concerning the evolutionary model., This work was carried out with the support of Universidad Politecnica de Valencia (PAID-06-09-2850; "arquitectura de las practicas de alto rendimiento de gestion de operaciones y gestion de recursos humanos: definicion de los constructos, modelo factorial y establecimiento del path dependence").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a new salmon salting smoking method and process monitoring by impedance spectroscopy

  • Rizo Párraga, Arancha María
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
[EN] In this work two objectives were proposed: (i) to optimize a new salmon salting smoking method using vacuum packaging and (ii) to evaluate the application of impedance spectroscopy (IS) to the on-line monitoring of the process. Different processing conditions were evaluated (4 smoke flavoring (SF) salt concentrations, 3 salting times, salting in vacuum or in air). Physico-chemical analyses and IS measurements were performed with three different sensors during the process. Salting with 16 g SF salt/100 g fish in vacuum packaging provided smoked salmon similar to products currently available on the market. This new method has the advantages of reducing processing times and waste. IS measurements were carried out by three different electrodes. The most appropriate sensor for process monitoring was a needle electrode, with which robust prediction models for NaCl content, moisture and a,,, during the salting smoking process were obtained. The results showed the potential of IS as a rapid on-line monitoring method of the salmon salting smoking process. (C) 2012 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the financial support for the work reported here received from the Generalitat Valenciana (GV/2011/098) and the Universitat Politecnica de Valencia (UPV) (PAID-06-09-2940). A. Fuentes would like to thank the Campus de Excelencia Internacional at the UPV for its support. The proof-reading of this paper was funded by the UPV, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding innovation in creative industries: knowledge bases and innovation performance in art restoration organisations

  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
  • Boix Domenech, Rafael
[EN] This paper studies innovation in the creative industry of art restoration, which is characterised by an intensive use of symbolic knowledge. Using the resource-based view of the firm as a theoretical framework, this study adapts Community Innovation Survey (CIS) methodology to this industry, creating and exploiting a unique dataset from the restoration departments of museums in 43 countries on 5 continents. The results suggest that the type and composition of the knowledge bases in play influence a department¿s absorptive capacity to access external information sources and thereby impact innovative outcomes. The article contributes to innovation literature by capturing innovation processes in a symbolic-based industry., This work was supported by the Universitat Politecnica de Valencia, Spain (Research Project n. 2677-UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the noncommutative Eikonal

  • Isidro, J.M.|||0000-0002-0720-9945
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Rivera Rebolledo, Jose Manuel
  • González-Santander Martínez, Juan Luis
We study the Eikonal approximation to quantum mechanics on the Moyal plane. Instead of using a star product, the analysis is carried out in terms of operator-valued wavefunctions depending on noncommuting, operator-valued coordinates. © 2011 World Scientific Publishing Company., J. M. I. thanks Max-Planck-Institut fur Gravitationsphysik, Albert-Einstein-Institut (Golm, Germany), for hospitality. This work has been supported by Universidad Politecnica de Valencia under grant PAID-06-09, and by Generalitat Valenciana (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling population uncertainty using statistical moments

  • González Parra, Gilberto Carlos
  • Santonja, Francisco José
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] In this paper a random differential equation system modeling population dynamics is investigated by means of the statistical moments equation. Monte Carlo simulations are performed in order to compare with the statistical moments equation approach. The randomness in the model appears due to the uncertainty on the initial conditions. The model is a nonlinear differential equation system with random initial conditions and is based on the classical SIS epidemic model. By assuming different probability distribution functions for the initial conditions of different classes of the population we obtain the mean and variance of the stochastic process representing the proportion of these classes at any time. The results show that the theoretical approach of moments equation agrees very well with Monte Carlo numerical results and the solutions converge to the equilibrium point independently of the probability distribution function of the initial conditions., The authors are grateful to the anonymous reviewers for their valuable comments and suggestions which improved the quality and the clarity of the paper. This work has been partially supported by the Spanish M.C.Y.T. and FEDER grants MTM2009–08587, DPI2010–20891–C02–01 as well as the Universitat Polit`ecnica de Val`encia grant PAID-06–09 (ref. 2588).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic design of concrete vaults using iterated local search and extreme value estimation

  • CARBONELL LOMBARDERO, ALFONSO
  • Yepes, V.|||0000-0001-5488-6001
  • Gonzalez Vidosa, Fernando
[EN] This paper describes an iterated local search algorithm based on a Gray code global best-descent (ILS-GB) for the automatic design and cost minimization of reinforced concrete vaults for road con-struction. The study involves a vault which measures 12.40 m in horizontal free span, 3.00 m in vertical height of the lateral walls and 1.00 m in earth cover. This problem includes 49 discrete de-sign variables as well as penalty functions for unfeasible solutions. An objective methodology based on the extreme value theory is used to determine the number of experimental tests required to provide a solution with user-defined accuracy as compared to a global optimum solution. Results indicate that the local optima found by ILS-GB fits a three-parameter Weibull distribution so the estimated location parameter &#947; can be used as an estimation of the global minimum cost solution. The minimum value obtained by ILS-GB differed just 0.81% compared to the theoretical mini-mum value so that, from the structural engineering perspective, the divergence was small enough to be accepted. Finally, the opti-mization method indicates savings of about 7% compared to a traditional design., This study was partially funded by the Spanish Ministry of Science and Innovation (research project BIA2011-23602), as well as the Universitat Politècnica de València (Research Project PAID-06-09). The authors are grateful to Dr. Debra Westall for her thorough revision of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A note on the Mackey-star topology on a dual Banach space

  • Guirao Sánchez, Antonio José|||0000-0002-1031-3954
  • Montesinos Santalucia, Vicente
[EN] By using a result in Kirk (Pac J Math 45:543 554, 1973), we show that there are separable Banach spaces such that their dual spaces, endowed with the Mackey-star topology, are not analytic. This solves a question raised in Kakol et al. (Descriptive topology in selected topics of functional analysis, Springer, 2011), and in Kakol and López-Pellicer (RACSAM 105:39 70, 2011)., A. J. Guirao is Supported in part by MICINN and FEDER (Project MTM2008-05396), by Fundación Séneca (Project 08848/PI/08), by Generalitat Valenciana (GV/2010/036), and by Universitat Politècnica de València (project PAID-06-09-2829). V. Montesinos is Supported in part by Project MICINN MTM2011-22417, Generalitat Valenciana (GV/2010/036), and by Universitat Politècnica de València (Project PAID-06-09-2829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validación de un modelo de medida de los resultados percibidos por los mandos relacionados con el uso de las prácticas de alta implicación-HIWP (Validation of a model of measure for the results perceived by senior managers related to the use of HIWP), Validation of a model of measure for the results perceived by senior managers related to the use of high involvement work practices - HIWP

  • Conzi, Graziela
[EN] Upon several human resources practices high involvement work practices stand out. Lawler’s model (1991; 1998) groups these practices in four constructs: communication, training, empowerment and rewards. Our work focuses on validating the model of measure of the scale of results, proposed by Lawler and colleagues (2001) and other alternative measurement models in order to measure the results with subjective perception for the senior managers. The measurement model is composed of performance and services scales, human resources and results achieved by the organization. After carrying out the confirmatory factorial analyses for collected data from 98 Spanish companies, we validate a model that presents very good convergent statistics of validity., [ES] Entre las prácticas de recursos humanos destacan las herramientas de alta implicación (HIWP). El modelo de Lawler (1991; 1998), agrupa estas prácticas en cuatro constructos: comunicación, formación, participación y compensación. Nuestro trabajo se centra en validar el modelo de medida de la escala de resultados, propuesto por Lawler y colaboradores (2001) y otros modelos de medida alternativos para medir los resultados con percepciones subjetivas por el mando. El modelo de medida se compone de las escalas de desempeño y servicio, recursos humanos y resultados de la organización. Tras realizar los análisis factoriales confirmatorias de los datos de 98 empresas españolas, validamos un modelo que presenta unos estadísticos de validez convergente muy buenos. Abstract: Upon several human resources practices high involvement work practices stand out. Lawler's model (1991; 1998) groups these practices in four constructs: communication, training, empowerment and rewards. Our work focuses on validating the model of measure of the scale of results, proposed by Lawler and colleagues (2001) and other alternative measurement models in order to measure the results with subjective perception for the senior managers. The measurement model is composed of performance and services scales, human resources and results achieved by the organization. After carrying out the confirmatory factorial analyses for collected data from 98 Spanish companies, we validate a model that presents very good convergent statistics of validity., This paper has been done with the project funding “architecture of high involvement and human resources management practices: definition of the constructs, factorial model and establishing of the path dependence” (PAID-06-09-2850) de la Universidad Politécnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Desarrollo de una metodología para identificar dependencia de camino en gestión de operaciones

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • García Sabater, Julio Juan|||0000-0001-9449-1709
  • Perello-Marin, M Rosario|||0000-0001-9183-0568
El marco teórico de la dependencia de camino puede resultar muy adecuado para analizar determinadas decisiones de gestión de operaciones. Por ello, este trabajo se plantea con el objetivo de proponer un procedimiento que permita definir si una decisión a tomar presenta "dependencia de camino". En caso afirmativo, se pretende crear un modelo que ayude al decisor a aumentar las probabilidades de éxito en estas situaciones. Con todo ello, se quiere plantear una hoja de ruta de investigación, seleccionando qué tipo de metodología sería la más adecuada para construir este modelo., Este trabajo se ha realizado con la financiación del proyecto “arquitectura de las practicas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence” (PAID-06-09-2850) de la Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remarks on the representation theory of the Moyal plane

  • Isidro, J.M.|||0000-0002-0720-9945
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • RIVERA REBOLLEDO, JOSE MANUEL
  • González-Santander Martínez, Juan Luis
We present an explicit construction of a unitary representation of the commutator algebra satisfied by position and momentum operators on the Moyal plane., The authors would like to thank the referee for constructive suggestions. J. M. Isidro thanks Max-Planck-Institut fur Gravitationsphysik (Albert-Einstein-Institut) Golm, Germany, for hospitality. This paper has been supported by Universidad Politecnica de Valencia under Grant PAID-06-09, and by Generalitat Valenciana Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast exact variable order affine projection algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
Variable order affine projection algorithms have been recently presented to be used when not only the convergence speed of the algorithm has to be adjusted but also its computational cost and its final residual error. These kind of affine projection (AP) algorithms improve the standard AP algorithm performance at steady state by reducing the residual mean square error. Furthermore these algorithms optimize computational cost by dynamically adjusting their projection order to convergence speed requirements. The main cost of the standard AP algorithm is due to the matrix inversion that appears in the coefficient update equation. Most efforts to decrease the computational cost of these algorithms have focused on the optimization of this matrix inversion. This paper deals with optimization of the computational cost of variable order AP algorithms by recursive calculation of the inverse signal matrix. Thus, a fast exact variable order AP algorithm is proposed. Exact iterative expressions to calculate the inverse matrix when the algorithm projection order either increases or decreases are incorporated into a variable order AP algorithm leading to a reduced complexity implementation. The simulation results show the proposed algorithm performs similarly to the variable order AP algorithms and it has a lower computational complexity. © 2012 Elsevier B.V. All rights reserved., Partially supported by TEC2009-13741, PROMETEO 2009/0013, GV/ 2010/027, ACOMP/2010/006 and UPV PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alternative tools to mass production and human performance indicators in sheltered work centers of Valencian community (Spain)

  • Marín-García, Juan Antonio
  • Miralles Insa, Cristóbal Javier|||0000-0002-5269-9955
  • García Sabater, Julio Juan|||0000-0001-9449-1709
  • Perello-Marin, M Rosario|||0000-0001-9183-0568
[EN] Purpose: The most popular alternative systems to mass production at an academic level (lean manufacturing, agile manufacturing, flexible customization, mass customization...) share many characteristics. Our article identifies an extensive set of alternative practices to mass production; analyzes the classification of practices in categories (Flow, TQM, TPM, Customer Relations, Supplier Relations and Human Resources Practices) and analyzes the impact on several human performance indicators such as satisfaction, absenteeism, voluntary turnover, permanent contracts, knowledge, personal & social adjustment activities and integration of workers into ordinary companies. Design/methodology/approach: Survey in sheltered work centers. We use regression analysis in order to prove relations between explicative and criterion variables. Findings: The results of our research allow us to identify that human resource management and customer relationship practices have significant effects on job satisfaction, knowledge, integration into ordinary companies and personal and social adjustment. Research limitations/implications: Data came only from one industry; therefore the results would not be directly generalized to other contexts. Practical implications: Managers in Sheltered work centers can estimate the impact of the deployment of alternative tools to mass production. Originality/value: There are few papers relating lean manufacturing tools and human resources performance indicators. At the same time, there are very few research carried out in sheltered work centers context., This research was supported by the project “Arquitectura de las prácticas de alto rendimiento de gestión de operaciones y gestión de recursos humanos: definición de los constructos, modelo factorial y establecimiento del path dependence” (PAID06-09-2850) from Universidad Politécnica de Valencia. This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures

  • Escrivá Cerdán, Clara
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Guenbour, A.
The influence of temperature (20–80 °C) and chloride concentration (0.06–0.42 wt.% KCl) on the electrochemical behaviour of the UNS N08031 was studied in 40 wt.% polluted phosphoric acid solution. Passivation behaviour was investigated by using potentiostatic tests at different potentials. From the linear regions of the log i vs. log t transients, the parameter n was obtained. The results showed that the applied potential hardly affects on the passivation rate n. However, n values decreased when temperature increased. The values of n demonstrated that the passive film formed on Alloy 31 was compact and highly protective., The authors express their gratitude to the MAEC of Spain (PCI Mediterraneo C/8196/07, C/018046/08, D/023608/09 and D/030177/10), to Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-09) and to the Generalitat Valenciana (GV/2011/093) for the financial support and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Applying generalised feedforward neural networks to classifying industrial jobs in terms of risk of low back disorders

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • Alcaide-Marzal, Jorge|||0000-0001-7116-9784
[EN] This paper describes a new approach for the development of artificial neural networks applied to classifying the risk of low back disorders (LBDs) presented by certain lifting jobs. The development process of neural networks for classification problems and the influence of network architecture on its prediction and generalisation capabilities are analysed. The phenomenon of overfitting and its relationship to the number of network connections, and the size of the training data set are discussed. The new approach uses complex architecture networks and early stopping of training procedures to avoid overfitting. It is thus compared with previous studies and its results and advantages over them are assessed. Such comparison shows that this approach allows for the development of neural networks for the classification of industrial jobs according to their risk of causing LBDs in a way faster than previous procedures. The neural network obtained is able to correctly classify 81.6% of highly repetitive lifting industrial jobs as posing low or high-risk for LBDs, from five independent variables representing biomechanical risk factors. The neural network obtained has been implemented in a software application which focuses on risk analysis and prevention of the injuries caused by tasks involving manual lifting in the industrial environment. Relevance to industry The approach described in this paper allows neural networks to be developed for the prediction of musculoskeletal disorders in a way that is faster and easier than with previous procedures. It can also be applied to risk prediction in other areas of ergonomics. The neural network obtained can be used by the ergonomist as a diagnostic system, enabling jobs to be classified into two categories (low-risk and high-risk) according to the associated likelihood of causing low back disorders. This system provides a higher proportion of correct classifications than other previous models., We would like to thank the Universidad Politécnica de Valencia for its assistance to carry out this research through its Support Programme for Research and Development and its Funding Projects PAID-06-09/2902 and PAID-05-09/4215.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Steady-state mean square performance of the multichannel filtered-X affine projection algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Piñero, Gema|||0000-0002-8719-8106
This paper provides a unified analysis of the steady-state behavior of different multichannel filtered-x affine projection algorithms when used in active noise control (ANC) systems. The analysis deals with two different filtering schemes: the modified filtered-x affine projection (MFXAP) algorithm, with the modified filtered-x structure embedded, that has been studied in previous works, and the filtered-x affine projection (CFXAP) algorithm, with the conventional filtered-x structure embedded, that becomes the main contribution of this work. This study is based on energy conservation principles and does not require a specific signal distribution. The derived theoretical models allow to accurately predict the steady-state performance of the considered algorithms for moderate AP orders and low step sizes mu. Simulation results obtained in practical ANC systems validate both the analysis and the achieved expressions, showing a relative good match between theory and practice. © 2012 IEEE., This work was supported in part by PROMETEO/2009/013, CICYT grant TEC2009-13741, Generalitat Valenciana GV/2010/027, and the Universitat Politecnica de Valencia PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature Effect on the Corrosion Behaviour of Alloy 31 in polluted H3PO4 and Analysis of the Corrosion Products by Laser Raman Microscope

  • Escrivá Cerdán, Clara
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Ben-Bachir, A.
[EN] Electrochemical behaviour of Alloy 31, a highly alloyed austenitic stainless steel (UNS N08031), in a 40 wt.% H3PO4 solution polluted with 2 wt.% H2SO4, 0.06 wt.% KCl and 0.6 wt.% HF was evaluated by cyclic potentiodinamic curves at different temperatures (20, 40, 60 and 80 degrees C). Temperature was found to favour both cathodic and anodic reactions. The corrosion products forming on the surface of Alloy 31 were indentified in situ by Laser Raman microscope. Corrosion products were mainly iron and chromium oxides, although phosphates were also included as a corrosion product on the surface of Alloy 31., Authors express their gratitude to the MAEC of Spain (PCI Mediterráneo C/8196/07, C/018046/08, D/023608/09 and D/030177/10), to Programa de Apoyo a la Investigación y Desarrollo de la UPV (PAID-06-09) and to the Generalitat Valenciana (GV/2011/093) for the financial support, to Ministerio de Ciencia e Innovación for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and to Dra. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the mechanical properties of Acrylonitrile Butadiene Styrene - High Impact Polystyrene blends with Styrene Ethylene Butylene Styrene

  • Peydro, M. A.|||0000-0002-8503-1505
  • Juárez Varón, David|||0000-0003-3251-8851
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Parres, F.|||0000-0002-1083-9526
[EN] A binary blend Acrylonitrile Butadiene Styrene ¿ High Impact Polystyrene (ABS-HIPS 50% wt) was prepared on a twin-screw extruder at 190-210 oC. The different mechanical properties were then analyzed using tensile strength and impact tests. The analysis of mechanical properties showed a decrease in elongation at break and impact strength. On the other hand, we have prepared ternary blends of ABS-HIPS- Styrene Ethylene Butylene Styrene (SEBS), varying the percentage of SEBS from 10 to 30 %wt using a twin screw extruder at 190-210oC. The addition of SEBS to the binary system (ABS-HIPS) allowed us to increase the ductile properties (elongation at break and impact strength)., We would like to thank the Vice-Directorate of Research, Development and Innovation of the Polytechnic University of Valencia for the help granted to the project: “Ternary systems research applied to polymeric materials for the upgrading of waste styrene”, Ref: 20091056 within the program of First Projects of Investigation (PAID 06-09) where this work is framed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proline as a biochemical marker in relation to the ecology of two halophytic Juncus species

  • Boscaiu, Monica|||0000-0002-9691-4223
  • Lull, Cristina|||0000-0001-9270-2365
  • Llinares Palacios, Josep Vicent|||0000-0002-9740-3281
  • Vicente, Oscar|||0000-0001-5076-3784
  • Boira Tortajada, Herminio|||0000-0002-5087-5249
[EN] Aims Osmolytes, used for maintaining osmotic balance and as osmoprotectants , are synthesized in plants as a general, conserved response to abiotic stress, although their contribution to stress-tolerance mechanisms remains unclear. Proline, the most common osmolyte, accumulates in many plant species in parallel with increased external salinity and is considered a reliable biochemical marker of salt stress. We have measured proline levels in two halophytic, closely related Juncus species under laboratory and field conditions to assess the possible relevance of proline biosynthesis for salt tolerance and therefore for the ecology of these two taxa. Methods Proline was quantified in plants treated with increasing NaCl concentrations and in plants sampled in two salt marshes located in the provinces of Valencia and Alicante, respectively, in southeast Spain. Electrical conductivity, pH, Na+ and Cl&#8722; concentrations were measured in soil samples collected in parallel with the plant material. Important Findings Treatment with NaCl inhibited growth of J. acutus plants in a concentration-dependent manner, but only under high salt conditions for J. maritimus. Salt treatments led to proline accumulation in both species, especially in the more salt-tolerant J. maritimus. The results, obtained under laboratory conditions, were confirmed in plants sampled in the field. In all the samplings, proline contents were significantly lower in J. acutus than in the more tolerant J. maritimus growing in the same area. No direct correlation between soil salinity and proline levels could be established, but seasonal variations were detected, with increased proline contents under accentuated water deficit conditions. Our results suggest that proline biosynthesis is not only an induced, general response to salt stress but also an important contributing factor in the physiological mechanisms of salt tolerance in Juncus, and that it therefore correlates with the ecology of both species., Spanish Ministry of Science and Innovation and European Regional Development Fund to O.V. (CGL2008-00438/BOS); Polytechnic University of Valencia to M. B. (PAID-06-09).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Creative service business and regional performance: evidence for the European regions

  • Boix, Rafael
  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
[EN] The study shows the important impact that the creative service business exerts on the wealth of European regions. The study disentangles the differences between creative service business and other non-creative service business, and explores how much each type of service business contributes to the wealth of the European regions. Most importantly, the study provides robust evidence about the fact that creative service business industries present the highest impact on the wealth of the European regions. The study has important implications for scholars and policymakers, focusing specifically on the type of service business that should be promoted by regional governments., The authors would like to thank the Ministry of Science and Innovation and the Universitat Polite`cnica de Vale`ncia (Spain) for financially supporting this research (ECO2010-17318 MICINN Project and Research Project n. 2677-UPV). Dr. Hervas-Oliver acknowledges funding from the Generalitat Valenciana, Conselleria d’Educacio´ (BEST, 2011; London School of Economics and Political Science), and the enormous support received from the London School of Economics.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Museums: Not Just Visiting Spaces but a Driving Force for the Use of Advanced S&amp, T in the Restoration of Artworks

  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
  • de-Miguel-Molina, María|||0000-0003-4264-8000
  • Albors Garrigós, José
Our paper analyses how museums not only play a traditional role in the cultural service but also act as a driving force for the use of science and technology in the conservation of artworks. Through a bibliometric approach and the use of social network analysis (SNA), we explore co-authorship of scientific articles and we detect how museums look for knowledge bases in science and technology. We also differentiate between institutions and geographical regions in order to find patterns in the cooperation with other institutions. Results indicate that European countries are important nodes in the cooperation for restoration and conservation, and patterns of cooperation indicate that museums look for knowledge bases mainly in restoration institutes and other museums in their own countries. This implies that museums look for analytical and synthetic knowledge out of the museums when they need to apply advanced science and technology in restoration., The authors would like to thank the Spanish Ministry of Economy and Competitiveness and Universitat Politècnica de València (Spain) for funding this research (HAR2012-32060 Project, Research Projects no. 2677-UPV and PAID2012-487-UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical properties of chitosan-essential oils film-forming dispersions. Effect of homogenization treatments

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Chitosan films enriched with basil (B) or thyme (T) essential oils (EO) were prepared by means of two homogenization treatments, without (H1) and with (H2) microfluidization. H2 treatment led to a significant decrease in the average particle size and the type of EO significantly affected d(43) values (p<0.05). zeta-potential significantly increased with the use of H2 treatment. Treatment H2 changed the rheological behaviour of the FFD. In all cases, the viscosity of the FFD was reduced by this treatment. The type of EO had a different effect on rheological behaviour depending on the homogenization treatment. CH:T were more viscous at H2 and CH:A showed higher apparent viscosity values than CH:T at H1., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of essential oils and homogenization conditions on properties of chitosan-based films

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of essential oil type (basil and thyme), its content and the homogenization treatment on the physical properties of chitosan-based film-forming dispersions and edible films was studied. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF) at 165 MPa. H2 emulsions showed the smallest particle size with the highest zeta-potential and the lowest viscosity. Composite films with essential oils were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed micro-cracks due to the weakening of the polymer chain interaction forces when oils are present, which affected their mechanical behaviour. MF increased WVP of pure CH films while oil incorporation was only effective to reduce WVP when they were incorporated at the lowest ratio and when high pressure was used in the homogenization of the film-forming dispersion. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082). Authors also thank Manuel Planes, Jose Luis Moya and Mercedes Tabernero of the UPV Electronic Microscopy Service for their assistance in the use of the SEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a control-oriented model to optimise fuel consumption and NOX emissions in a DI Diesel engine

  • Molina, Santiago|||0000-0001-7879-2421
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Martín, Jaime|||0000-0002-0496-3176
  • García Sarmiento, Daniel
This paper describes a predictive NOX and consumption model, which is oriented to control and optimisation of DI Diesel engines. The model applies the Response Surface Methodology following a two-step process: firstly, the relationship between engine inputs (intake charge conditions and injection settings) and some combustion parameters (peak pressure, indicated mean effective pressure and burn angles) is determined; secondly, engine outputs (NOX and consumption) are predicted from the combustion parameters using NOX and mechanical losses models. Splitting the model into two parts allows using either experimental or modelled combustion parameters, thus enhancing the model flexibility. If experimental in-cylinder pressure is used to obtain combustion parameters, the mean error of predicted NOX and consumption are 2% and 6% respectively, with a calculation time of 5.5 ms. Using modelled parameters reduces the calculation time to 1.5 ms, with a penalty in the accuracy. The model performs well in a multi-objective optimisation, reducing NOX and consumption in different amounts depending on the objective of the optimisation., The support of the Universitat Politecnica de Valencia (PAID-06-09) and Generalitat Valenciana (GV/2010/045) is greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the random Legendre differential equation: Mean square power series solution and its statistical functions

  • Calbo Sanjuán, Gema
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
  • Villafuerte Altuzar, Laura
In this paper we construct, by means of random power series, the solution of second order linear differential equations of Legendre-type containing uncertainty through its coefficients and initial conditions. By assuming appropriate hypotheses on the data, we prove that the constructed random power series solution is mean square convergent. In addition, the main statistical functions of the approximate solution stochastic process generated by truncation of the exact power series solution are given. Finally, we apply the proposed method to some illustrative examples to compare the numerical results for the average and the variance with respect to those obtained by the Monte Carlo approach. © 2011 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish M.C.Y.T. grants MTM2009-08587, DPI2010-20891-C02-01, Universidad Politecnica de Valencia grant PAID06-09-2588 and Mexican Conacyt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends

  • Peydro, M. A.|||0000-0002-8503-1505
  • Parres, F.|||0000-0002-1083-9526
  • Navarro Vidal, Raúl
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
This work studies the recovery of two grades of acrylonitrile butadiene styrene (ABS) contaminated with low-density polyethylene (LDPE), by adding styrene ethylene/butadiene styrene (SEBS). To simulate contaminated ABS, virgin ABS was mixed with 1, 2, 4, and 8% of LDPE and then extruded at 220°C. After this, the ABS with the highest percentage of LDPE (8%) was mixed with 1, 2, 4, and 8% of SEBS and then extruded. Different blends were mechanically, rheologically, optically, and dimensionally characterized to study how different percentages of LDPE and SEBS modify their properties. The results obtained show how the tensile strength, Young modulus, elongation, and impact strength linearly decrease as the LDPE amount increases, for both natural and black ABS. Through the addition of SEBS to contaminated ABS, it is possible to improve its impact strength and elongation values nearly to those of virgin ABS. However, its tensile strength and Young modulus show no improvement, and even show a slight reduction. Regarding the rheological properties, the LDPE contamination in ABS causes a remarkable decrease in viscosity, and adding SEBS to the blend lowers its viscosity even further for both natural and black grades. This reduction is not a negative aspect, but rather quite the reverse, as the more fluid the material, the easier the mold injection process becomes. POLYM. ENG. SCI., 54:1313 1324, 2014. © 2013 Society of Plastics Engineers, Contract grant sponsor: "Subdireccion de Investigacion, Desarrollo e Innovacion de la Universitat Politecnica de Valencia" to the research project: "la investigacion de sistemas ternarios aplicados a los materiales polimericos para la mejora de residuos de estireno," Ref.: 20091056 belonging to the research program primeros proyectos de investigacion; contract grant number: PAID 06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysing innovation in museums through qualitative comparative analysis

  • de-Miguel-Molina, Blanca|||0000-0002-1267-6070
  • de-Miguel-Molina, María|||0000-0003-4264-8000
  • Boix Domenech, Rafael
[EN] The aim of this paper is to analyse innovation in the processes undertaken by museums in the conservation and restoration of artworks. Information from 90 conservation and restoration departments from museums in 43 countries was analysed using qualitative comparative analysis. Two theoretical concepts - knowledge bases (analytical, synthetic, symbolic) and modes of innovations (Science, Technology and Innovation; Doing, Using, and Interacting) - were used to define necessary and sufficient conditions which explain innovation in artwork restoration. Two important results were obtained from the analysis. The first indicated that innovation was explained by the combination of symbolic and analytical knowledge bases (unrelated variety), and high innovation performance was also explained by the related variety in the analytical knowledge base. The second result revealed that innovation is higher when museums cooperate simultaneously with partners using the two modes of innovation., This work was supported by the Universitat Politecnica de Valencia [Research Project n. 2677-UPV, and SP20120346].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodology to design a bottoming Rankine cycle, as a waste energy recovering system in vehicles. Study in a HDD engine

  • Macian Martinez, Vicente
  • Sánchez Serrano, Jaime
  • Serrano, J.R.|||0000-0003-0692-3917
  • Dolz, Vicente|||0000-0003-1511-6957
This article describes a methodology for the optimization of a bottoming cycle as a waste heat recovering system in vehicles. The methodology is applied to two particular cases in order to evaluate the preliminary energetic and technical feasibility of the implementation of a bottoming cycle in a heavy duty diesel (HDD) engine considering two different criteria. Initially, a study of the different waste heat sources of the engine is described. In this study, the power and exergy of each heat source is quantified, in order to evaluate which sources are suitable to be used in the bottoming cycle. The optimum working fluids to run the cycles are selected (water and R245fa). Then, the ideal Rankine cycle is optimized for the two different working fluids and different sets of heat sources (all the available heat sources and the sources with high exergy respectively) throughout the engine operating range, reaching a maximum improvement of 15% of the fuel consumption of the engine. Later, a study of the minimum temperature difference between the hot and cold flow of the heat exchangers is described. The improvements in fuel consumption and the size of the installed heat exchanger are related to this temperature difference. Finally, the non-ideal behavior of the machines (pump and expander) is analyzed, obtaining a maximum improvement of 10% in brake specific fuel consumption (bsfc)., This work was partially funded by the "Programa de Formacion de Profesorado Universitario (FPU)", "Programa de Apoyo a la Investigacion y Desarrollo de la Universidad Politecnica de Valencia 2010", "Proyectos I + D para grupos de investigacion emergentes 2011" and "Programa de apoyo a la investigacion y desarrollo de la U.P.V (PAID-06-09)". The authors thank J. Dahlqvist for his help in improving the English grammar.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chitosan essential oil films on the storage-keeping quality of pork meat products

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
Edible films based on chitosan were prepared, with and without basil or thyme essential oils, with the aim of assessing their protective ability against lipid oxidation and their antimicrobial activity. Chitosan films had good oxygenbarrier properties, which were worsened by essential oil addition, especially when the film equilibrium moisture content increased. Due to the oxygen-barrier effect, all the films effectively protected pork fat from oxidation, in comparison to unprotected samples. In spite of the worsening of the oxygen-barrier properties, the films with essential oils were more effective than those of pure chitosan, which points to the chemical action of specific antioxidant compounds of the oils. Films were effective to control microbial growth in minced pork meat, although the incorporation of essential oils did not improve their antimicrobial activity. Throughout the storage, the films led to colour changes in minced pork meat associated with the conversion of myoglobin into metmyoglobin due to the reduction of the oxygen availability., The authors acknowledge the financial support provided by the Universitat Politecnica de Valencia (PAID-06-09-2834), Generalitat Valenciana (GV/2010/082) and Ministerio de Educacion y Ciencia (AGL2010-20694). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chaotic differential operators

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Martínez Jiménez, Félix|||0000-0002-3369-4286
We give sufficient conditions for chaos of (differential) operators on Hilbert spaces of entire functions. To this aim we establish conditions on the coefficients of a polynomial P(z) such that P(B) is chaotic on the space lp, where B is the backward shift operator. © 2011 Springer-Verlag., This work was partially supported by the MEC and FEDER Projects MTM2007-64222, MTM2010-14909, and by GVA Project GV/2010/091, and by UPV Project PAID-06-09-2932. The authors would like to thank A. Peris for helpful comments and ideas that produced a great improvement of the paper's presentation. We also thank the referees for their helpful comments and for reporting to us a gap in Theorem 1.