Pasar al contenido principal

COORDINACION DE OPERACIONES EN REDES DE SUMINISTRO/DEMANDA AJUSTADAS, RESILIENTES A LA INCERTIDUMBRE: MODELOS Y ALGORITMOS PARA LA GESTION DE LA INCERTIDUMBRE Y LA COMPLEJIDAD

DPI2010-18243

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La innovación organizacional en el sector turístico: nuevas demandas del entorno, Innovation in tourism: new environmental demands

  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] In these times of economic and financial instability, innovation will lead us to be competitive. All companies use to be innovating, even without knowledge about it. So, the challenge is to find a way to deal with innovation and not lose it in the company¿s administrative and organizational processes. Referred on the tourism sector where innovation is possible, in this paper we present a model based in different experiences developed in touristic companies. We propose ten variables or behavior patterns applied to organizational structure and ideas management system, which will guide companies to be innovative., [ES] En estos momentos de gran inestabilidad económica y financiera, innovar es el reto que nos guiará a ser competitivos. Todas las empresas innovan, aún sin saber que lo están haciendo, así que el reto radica en saber canalizar dicha innovación de forma que no se pierda en la maraña administrativa y organizativa de la empresa. De este modo, basándonos en el sector turístico donde hay más que margen para la innovación, en el presente trabajo se presenta un modelo extraído de diferentes experiencias realizadas en empresas del sector. Se proponen diez variables, o patrones de conducta,aplicadas a la estructura organizativa y el sistema de gestión de ideas de la empresa, lo cual contribuirá a convertir las empresas en innovadoras., Trabajo parcialmente financiado por los proyectos: CORSARI MAGIC DPI2010-18243; TIN2008-06872-C04-02/TIN; MINECO (DER2012-37844); MICNIN (DER2009-14519-C05-01/JURI); PAID-05-12-SP20120480 y PIME/2012/A/016/A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporación de Riesgos Ergonómicos en el Balanceo de Líneas de Ensamble en U, Incorporating ergonomic risks into U-shaped assembly line balancing problem

  • Coronado-Hernandez, Jairo R.
  • Ospina Mateus, Holman
[EN] This paper presents an optimization model for the U-line balancing to incorporating ergonomic risks. Our article, paper considers different ergonomic methods, which may be involved into assembly line. An example is shown as distributed and assigned tasks on different workstations ergonomically acceptable compliance level in repetitive activities valued by the check List OCRA method into U-shaped assembly line balancing., [ES] En este trabajo se presenta un modelo de optimización en el balanceo de línea en U considerando riesgos ergonómicos de las tareas dentro de las estaciones de trabajo. El documento, explora diferentes métodos ergonómicos, los cuales pueden ser involucrados dentro de una línea de ensamble. Por medio de un ejemplo, se evidencia como se balancea las tareas en diferentes estaciones de trabajo, respetando el nivel aceptable ergonómico en actividades repetitivas, valorado por medio del método Check List OCRA para una línea de ensamble en U., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "COORDINACION DE OPERACIONES EN REDES DE SUMINISTRO/DEMANDA AJUSTADAS, RESILIENTES A LA INCERTIDUMBRE: MODELOS Y ALGORITMOS PARA LA GESTION DE LA INCERTIDUMBRE Y LA COMPLEJIDAD". Agradecemos a IBM, por proveernos la herramienta ILOG IBM CPLEX Optimization Studio, Versión: 12.2 bajo el Academic Partner Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La matriz de Operaciones y Materiales y la Matriz de Operaciones y Recursos, un nuevo enfoque para resolver el problema GMOP basado en el concepto del Stroke, The Operations &amp, Materials Matrix and the Operations &amp, Resources Matrix, a new approach to solve the GMOP problem based on the Stroke concept

  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, José Pedro|||0000-0002-9097-2852
[EN] Since the 1970, the multi-stage product materials management used the methodology called MRP. The CRP incorporation in the traditional ERP jointly with the MRP gave birth to the so-called MRPII. However, since that time in the literature, a unique bill of materials and a unique list of resources are assigned to each product to be assembled which implies strong limitations to consider alternative operations. In the GMOP problem, the use of the stroke concept is proposed to solve the operations and materials planning problem considering alternative operations. The aim of this paper is to present firstly an evolution of the GMOP problem considering scheduled receptions, and secondly to present the deployment and analysis of the matrices that are proposed to facilitate a model and tool implementation based on the stroke concept., [ES] La gestión de materiales de productos multi-nivel usa desde los años 1970 la metodología denominada MRP. La incorporación del CRP en los ERP conjuntamente al MRP tradicional dio nacimiento a los llamados MRPII. Sin embargo, desde aquella época en la literatura, se asigna una única lista de materiales y una lista única de recursos a cada producto susceptible de ser ensamblado lo que implica fuertes limitaciones para considerar operaciones alternativas. En el problema GMOP, se propone el uso del concepto del stroke para resolver el problema de planificación de las operaciones y de los materiales considerando operaciones alternativas. En este artículo, se presenta primero una evolución del problema GMOP introduciendo las recepciones programadas, y segundo, se presenta el despliegue y análisis de las matrices que se proponen para facilitar la implementación de un modelo y una herramienta que se basen en el concepto de stroke., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título «Coordinación de operaciones en redes de suministro/demanda ajustadas, resilientes a la incertidumbre: modelos y algoritmos para la gestión de la incertidumbre y la complejidad». También, esta investigación ha sido parcialmente financiada por el Séptimo Programa Marco de la Comisión de las Comunidades Europea (FP7/2007- 2013) mediante el acuerdo de subvención n.° NMP2-SL-2009-229333, Proyecto «Resilient Multi-Plant Networks» (REMPLANET). Asimismo, esta investigación también ha sido financiada mediante
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new formulation technique to model Materials and Operations Planning: The Generic Materials and Operations Planning (GMOP) Problem

  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Maheut, Julien|||0000-0002-5796-9053
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
This paper presents a technique that mathematically models relationships between operations and materials, which amends the usual technique used to model materials and resources requirement planning through mathematical programming. This technique represents operations and materials requirement planning by extending the bill of materials concept beyond the Gozinto structure. This so-called generic materials and operations planning (GMOP) problem is based on the 'stroke' concept. The decision variables are the operations (strokes) each resource is capable of, and not materials or resources. This form extends modelling capacity to transformation operations, resource and product substitution, and material transportation. It considers most conventional bills of materials types (direct, alternative and reverse BOMs, alternative resources and routings) with the same data structure. It contemplates multi-level problem modelling, and even packaging and alternative transport modes. The same data structure represents these characteristics. The problem, its mathematical modelling approach and examples illustrating its use are provided., The work described in this paper has been supported by the project 'Corsari Magic DPI2010-18243' by the Ministerio de Ciencia e Innovacion del Gobierno de Espana within the programme de 'Proyectos de Investigacion Fundamental No Orientada'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flow shop scheduling with heterogeneous workers

  • Benavides, Alexander J.
  • Ritt, Marcus
  • Miralles Insa, Cristóbal Javier|||0000-0002-5269-9955
We propose an extension to the flow shop scheduling problem named Heterogeneous Flow Shop Scheduling Problem (Het-FSSP), where two simultaneous issues have to be resolved: finding the best worker assignment to the workstations, and solving the corresponding scheduling problem. This problem is motivated by Sheltered Work centers for Disabled, whose main objective is the labor integration of persons with disabilities, an important aim not only for these centers but for any company desiring to overcome the traditional standardized vision of the workforce. In such a scenario the goal is to maintain high productivity levels by minimizing the maximum completion time, while respecting the diverse capabilities and paces of the heterogeneous workers, which increases the complexity of finding an optimal schedule. We present a mathematical model that extends a flow shop model to admit a heterogeneous worker assignment, and propose a heuristic based on scatter search and path relinking to solve the problem. Computational results show that this approach finds good solutions within a short time, providing the production managers with practical approaches for this combined assignment and scheduling problem., We are grateful for the support by CAPES-Brazil and MEC-Spain (project CAPES-DGU258-12/PHB-0012-PC), by FAPERGS (project 12/2046-6), by Petrobras, by CNPq (project 478847/2013-0), and by the National Center for Supercomputing at UFRGS. We also thank the project "CORSARI MAGIC DPI2010-18243" of the Spanish Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Economic lot scheduling with deliberated and controlled coproduction

  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Coronado-Hernández, Jairo R.
This paper presents an algorithm to define the optimal parameters for deliberated and controlled coproduction in an economic lot scheduling problem setting (DCCELSP). Coproduction is said to be deliberated and controlled because it is possible to decide whether or not to coproduce when all the parameters associated with the process are known. The aim is to determine how to produce two products most economically where deliberated coproduction is an option. For this purpose, a procedure for defining optimal lot periods is introduced. Two models are proposed for this procedure and a numerical illustration is provided to gain insight into their dynamics. The cost advantages of coproduction were found to depend on the relationship between setup and holding costs, production rates, and demand for products. The more similar these system parameters are and the higher the machine usage ratio is, the more favourable coproduction is. Additionally, if coproduction is not deliberated appropriately, costs soar., The work described in this paper has been supported by the project "CORSARI MAGIC DPI2010-18243" of the Ministerio de Ciencia e Innvovacion of Government of Spain within the Program "Proyectos de Investigacion Fundamental no orientada". The translation of this paper was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis crítico de los problemas de secuenciación en líneas de montaje con mezcla de modelos en la literatura científica, A critycal analysis of MMAL Sequencing problems in the literature

  • Valero-Herrero, Maria
[EN] In the current paper, we show an analysis of scientific literature on the MixedModel Assembly Lines sequencing, such as automobile assembly lines. In the real car productive systems, the sequence is defined by the content and the extraction order of a subset of units, taken from a buffer at the beginning of the assembly line, which is dynamicallyrefilled. The problem consists of defining the sequence of an assembly line in real time to optimize the flow of materials and the requirements of resources on the line. The aim of this review was to determine the different approaches and their approximation to real applications., [ES] En el presente trabajo se muestra un análisis de la literatura científica existente sobre la secuenciación en líneas de montaje con mezcla de modelos, como son las líneas demontaje de automóviles. En los sistemas realesde fabricación de automóviles, la secuencia se define por el contenido y el orden de extracción de un subconjunto de unidades, tomado de un almacén previo a la línea de montaje, que se rellena dinámicamente. El problema consiste en definir la secuencia de una cadena de montaje en tiempo real para optimizar el flujo de materiales y los requisitos de recursos en la línea. El objetivo de esta revisión ha sido conocer los diferentes enfoques existentes y su aproximación a las aplicaciones reales, El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "Coordinación de operaciones en redes de suministro/demanda ajustadas, resilientes a la incertidumbre: modelos y algoritmos para la gestion de la incertidumbre y la complejidad".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influencia de la teoría de Impression Management en los comportamientos que afectan a la relación entre personas y organizaciones, The influence of the Impression Management theory in the behaviors that affect relationship between people and organization

  • Jácome López, Rita
  • Guillen Parra, Manuel
  • Bañón Gomis, Alexis Jacobo
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
[EN] Impression management (IM), the process by which individuals -consciously or unconsciously- try to control the impressions others form of them, plays an important role in the relationship between people and organizations. This article reviews the existing literature on this concept, in a multidisciplinary and systematic way, analysing and combining the different approaches from which it has been studied: social behavior; organizational behavior and human resource management; and social responsibility. It offers a comprehensive and proper definition considering the three dimensions of individual behavior and its implications for business organization. It finally comes to show a "path" for future research on the IM theory applied to the organizational level., [ES] El proceso por el que las personas intentan, de modo más o menos consciente controlar las impresiones que otros se forman de ellos, impression management (IM), juega un papel importante en la relación entre las personas y las organizaciones. Este artículo revisa la literatura existente sobre el concepto, de forma multidisciplinar y sistematizada, analizando y aunando los distintos enfoques desde los que ha sido estudiado: comportamiento social; comportamiento organizativo y los recursos humanos; y comportamiento ético. Ofrece una definición integral y propia teniendo en cuenta las tres dimensiones del comportamiento individual y sus implicaciones para la organización de empresas. Trata finalmente de mostrar un "mapa" para futuras investigaciones sobre la teoría de IM aplicada al ámbito organizativo., CORSARI MAGIC DPI2010-18243, TIN2008-06872-C04-02/TIN
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Supply chain integration scales validation and benchmark values

  • Marín-García, Juan Antonio
  • Alfalla Luque, Rafaela
  • Medina-López, Carmen
[EN] Purpose: The clarification of the constructs of the supply chain integration (clients, suppliers, external and internal), the creation of a measurement instrument based on a list of items taken from earlier papers, the validation of these scales and a preliminary benchmark to interpret the scales by percentiles based on a set of control variables (size of the plant, country, sector and degree of vertical integration). Design/methodology/approach: Our empirical analysis is based on the HPM project database (2005-2007 timeframe). The international sample is made up of 266 plants across ten countries: Austria, Canada, Finland, Germany, Italy, Japan, Korea, Spain, Sweden and the USA. In each country. We analized the descriptive statistics, internal consistency testing to purify the items (inter-item correlations, Cronbach’s alpha, squared multiple correlation, corrected item-total correlation), exploratory factor analysis, and finally, a confirmatory factor analysis to check the convergent and discriminant validity of the scales. The analyses will be done with the SPSS and EQS programme using the maximum likelihood parameter estimation method. Findings: The four proposed scales show excellent psychometric properties. Research limitations/implications: with a clearer and more concise designation of the supply chain integration measurement scales more reliable and accurate data could be taken to analyse the relations between these constructs with other variables of interest to the academic l fields. Practical implications: providing scales that are valid as a diagnostic tool for best practices, as well as providing a benchmark with which to compare the score for each individual plant against a collection of industrial companies from the machinery, electronics and transportation sectors. Originality/value: supply chain integration may be a major factor in explaining the performance of companies. The results are nevertheless inconclusive, the vast range of results obtained are due, amongst other things, to the fact that there is no exactness to the group of scales used, no-one has yet published an analysis of the measurement models nor clear benchmarks as to the variety of the scales used., This paper has been made possible thanks to grant DPI2006-05531 (HPM Project-Spain: Project for high performance manufacturing) awarded by the Spanish Ministry of Education and Science and the project “CORSARI MAGIC DPI2010-18243” by the Spanish Ministry of Science and Innovation within the Program “Proyectos de Investigación Fundamental No Orientada”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio de la configuración productiva de una planta de pre-montaje de unidades aplicando parámetros de presencia máxima de opciones, Study of the configuration of a pre-assembly plant using maximum fill levels of units’ options

  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Morant Llorca, Joan
[EN] In this paper, a " pull " system to solve the problem of sequencing homogeneous units is defined. The literature and practice usually address this problem of " Push" mode in which an intelligent system calculates the next unit that the system must produce according to what is available . The proposed method suggests that the plant is fed with production orders (unit by unit) versus those that remain in the plant ( or rather those than miss). The case study of an assembly factory in which a new pre-assembly plant with parallel lines and alternate routings and pull off tables prior to the final assembly plant is introduced. The impact of restricting the number of units that receive high operating cycle time in the system consid-ering different indicators are studied. It is proposed to analyze the levels, theoretically con-sidering both physical space as existing times in the system. Finally , an analysis through a simulation based on discrete events with Simio Simulation Software® is proposed., [ES] En este artículo, se define un sistema Pull para resolver el problema de secuenciación de unidades homogéneas. La literatura y la práctica abordan habitualmente este problema de un modo Push en el que un sistema inteligente calcula la siguiente unidad que el sistema debe producir en función de lo que tiene disponible. El método propuesto plantea que se alimente la planta con órdenes de fabricación (unidad a unidad) en función de las que permanecen en la planta (o más bien de las que faltan). Se plantea el caso de una planta de montaje en la que existe una planta de pre-montaje previa a la línea de montaje con líneas en paralelo y ruteos alternativos así como operaciones que se realizan en estaciones ubicadas fuera de la línea. Se estudiará el impacto de restringir la cantidad de unidades que reciben operaciones de alto tiempo de ciclo en el sistema considerando diferentes indicadores. Se propone analizar los niveles de manera teórica considerando tanto los espacios físicos existentes y considerando los tiempos existentes en el sistema. Por último, se propone un análisis a través de una simulación basada en eventos discretos con Simio Simulation Software®., El presente trabajo forma parte del Proyecto CORSARI MAGIC (Ref. DPI2010-18243) financiado por el Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An analysis of the direct and mediated effects of employee commitment and supply chain integration on organisational performance

  • Alfalla-Luque, Rafaela
  • Medina-Lopez, Carmen
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
This paper focuses on the interrelationships among the different dimensions of supply chain integration. Specifically, it examines the relationship between employee commitment and supply chain integration dimensions to explain several performance measures, such as flexibility, delivery, quality, inventory and customer satisfaction. Very little research has been conducted onto this topic, since employee commitment is rarely included as an antecedent of the effect of supply chain integration on performance. Seven research models have been analysed with Structural Equation Models using a multiple-informant international sample of 266 mid-to-large-size manufacturing plants. The findings suggest that the relationship between employee commitment and operational performance is fully mediated by supply chain integration. Employee commitment contributes to improving internal integration, and internal integration affects performance both directly and indirectly. Moreover, obtaining internal integration helps to achieve supplier and customer integration. As a result, companies should strive to achieve both employee commitment and internal integration, as they mutually reinforce each other. Similarly, managers should achieve internal integration before external integration and include external integration at the strategic level in order to reap the greatest advantages from supply chain integration. Meanwhile, managers should promote employee commitment not only for better supply chain success, but also to mitigate the barriers of supply chain management implementation., This paper has been made possible thanks to Grants DPI2009-11148 and DPI2010-18243 awarded by the Spanish Ministry of Science and Innovation and the Project of Excelence P08 SEJ 3841 awarded by the Junta de Andalucia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coproducción: Una revisión de la literatura

  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
[ES] El objetivo del presente artículo es analizar la literatura existente en el entorno de la coproducción. De acuerdo con Deuermeyer y Pierskalla (1978), es posible afirmar que existe coproducción cuando un proceso productivo da como resultado más de un producto de manera simultánea. La coproducción aparece en ambientes de alta y baja tecnología de producción. La coproducción, suele ocurrir en entornos de producción en los que algunos procesos no se conocen/comprenden perfectamente y/o no están totalmente bajo control (coproducción incontrolada). Sin embargo, tal y como, se ha podido constatar en la realidad industrial, en ocasiones el proceso de coproducción, si se conoce/comprende perfectamente (coproducción controlada). La coproducción puede ser un fenómeno intrínseco al propio proceso productivo (coproducción no deliberada). Aunque en ocasiones puede ser escogida por el gestor del proceso (coproducción deliberada). Así, resulta interesante clasificar la literatura respecto a estas variables, pues hasta la fecha no se había realizado, proporcionando al lector una visión clara de la literatura existente en torno a la coproducción., Este trabajo ha sido realizado gracias a la financiación del Ministerio de Ciencia e Innovación a través del proyecto CORSARI MAGIC: Coordinación de operaciones en redes de suministro/demanda ajustadas, resilientes a la incertidumbre: modelos y algoritmos para la gestión de la incertidumbre y la complejidad, DPI: 2010-18243.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Algorithm for complete enumeration based on a stroke graph to solve the supply network configuration and operations scheduling problem

  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, José Pedro|||0000-0002-9097-2852
[EN] Purpose: The purpose of this paper is to present an algorithm that solves the supply network configuration and operations scheduling problem in a mass customization company that faces alternative operations for one specific tool machine order in a multiplant context. Design/methodology/approach: To achieve this objective, the supply chain network configuration and operations scheduling problem is presented. A model based on stroke graphs allows the design of an algorithm that enumerates all the feasible solutions. The algorithm considers the arrival of a new customized order proposal which has to be inserted into a scheduled program. A selection function is then used to choose the solutions to be simulated in a specific simulation tool implemented in a Decision Support System. Findings and Originality/value: The algorithm itself proves efficient to find all feasible solutions when alternative operations must be considered. The stroke structure is successfully used to schedule operations when considering more than one manufacturing and supply option in each step. Research limitations/implications: This paper includes only the algorithm structure for a one-by-one, sequenced introduction of new products into the list of units to be manufactured. Therefore, the lotsizing process is done on a lot-per-lot basis. Moreover, the validation analysis is done through a case study and no generalization can be done without risk. Practical implications: The result of this research would help stakeholders to determine all the feasible and practical solutions for their problem. It would also allow to assessing the total costs and delivery times of each solution. Moreover, the Decision Support System proves useful to assess alternative solutions. Originality/value: This research offers a simple algorithm that helps solve the supply network configuration problem and, simultaneously, the scheduling problem by considering alternative operations. The proposed system allows an easier generation of many different alternatives for the supply network configuration., The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. NMP2-SL-2009- 229333 and has been partially supported by the Spanish Ministry of Science and Innovation within the Program "Proyectos de Investigación Fundamental No Orientada through the project "CORSARI MAGIC DPI2010-18243". Julien Maheut holds a VALi+d grant funded by the Regional Valencian Government (Ref. ACIF/2010/222).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Common items in the companies information flow from the organizational structure and management of ideas through the perspective of the global cognitive theory

  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Pons Morera, Carlos
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
[EN] Companies have to adapt their structures to environmental continuous changes. In crisis time is impor-tant to identify and appreciate what people can bring to businesses (ideas, knowledge, innovation, etc.) in order to survive by creating competitive advantages and exploiting what the environment offers. In addition, Information and Communication Technologies (ICT) have a deep impact on organizations; ICT are often related to the emergence of new organizational forms, linking technological change and or-ganizational change, which in turn affects people. In this paper we show the relation between informa-tion flows, organizational structure and ideas and knowledge management., This work has been partially supported by the projects TIN2008-06872-C04-02/TIN and CORSARI MAGIC DPI2010-18243.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model and heuristics for the Assembly Line Worker Integration and Balancing Problem

  • Moreira, Mayron Cesar O.
  • Costa, Alysson M.
  • Miralles Insa, Cristóbal Javier|||0000-0002-5269-9955
We propose the Assembly Line Worker Integration and Balancing Problem (ALWIBP), a new assembly line balancing problem arising in lines with conventional and disabled workers. The goal of this problem is to maintain high productivity levels by minimizing the number of workstations needed to reach a given output, while integrating in the assembly line a number of disabled workers. Being able to efficiently manage a heterogeneous workforce is especially important in the current social context where companies are urged to integrate workers with different profiles. In this paper we present mathematical models and heuristic methodologies that can help assembly line managers to cope with this additional complexity. We demonstrate by means of a robust benchmark how this integration can be done with losses of productivity that are much lower than expected. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by CAPES-Brazil and MEC-Spain (coordinated project CAPES DGU 258-12/PHB2011-0012-PC) and by FAPESP-Brazil. We also thank the project "CORSARI MAGIC DPI 2010-18243" of the Ministerio de Ciencia e Innovacion del Gobierno de Espana within the Program "Proyectos de Investigacion Fundamental No Orientada". The authors also thank two anonymous reviewers and the editor for their useful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the car resequencing problem with mix Banks, Resolviendo el problema de Resecuenciación de Coches con el uso de líneas de acumulo paralelas

  • Valero-Herrero, Maria
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
[EN] Mixed-model assembly lines are used at the automotive industry to obtain more efficient production flows. The sequencing of the different units is done at the very beginning of the process, but frequently large perturbations of the original sequence can be observed. These perturbations might be intended or not but to some extent, a resequencing process –to create a new sequence with the available units- is necessary. This paper focuses in the re-sequencing process by using parallel buffering lines (known as mix banks). Algorithms to decide the line of destination of incoming units and the line of extraction of units to the line are presented and evaluated. The algorithms and their performance have been verified using discrete event simulation software (SIMIO). An analysis considering different operations situations is done and some recommendations to real case users are presented., [ES] En la industria del automóvil se utilizan líneas mixtas de montaje de modelos para obtener flujos de producción más eficientes. Aunque la secuencia de los productos en la línea se contempla en el comienzo del proceso, se suelen producir perturbaciones en la secuencia de producción. En ocasiones es necesaria una resecuenciación entendida como la creación de una nueva secuencia. Este trabajo se centra en la resecuenciación mediante el uso de líneas paralelas de almacenamiento (conocidas como mix-bank). Se proponen algoritmos para decidir en qué línea se debe introducir y de qué línea se debe extraer. Los algoritmos son verificados mediante modelos de simulación implementados en SIMIO. Se realiza un análisis para diferentes factores operacionales y se proponen reglas de gestión para su uso en casos reales., The work described in this paper has been supported by the project "CORSARI MAGIC DPI2010-18243" by the Ministerio de Ciencia e Innovación del Gobierno de España within the Program de "Proyectos de Investigación Fundamental No Orientada". This paper also has been written with financial support from the Project “Path Dependence y toma de decisiones para selección de herramientas y prácticas de Lean Manufacturing” (PAID-06-12-SP20120717) of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimating costs in the EOQ formula

  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Valero-Herrero, Maria
[EN] The EOQ formula (Harris, Fact Mag Manage 10(2):135-6-152, 1913) provides a balance between setup costs and holding costs in the system. This formula has been widely developed in the literature. However in the industrial reality, it is often difficult to know the exact value of these setup and holding costs. In this paper, we develop a formula to estimate lot size from the values known in the company. It is verified that the behavior of these formulas meets expectations., The work described in this paper has been supported by Project “CORSARI MAGIC DPI2010-18243” from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transparent fuzzy logic based methods for some human resources problems

  • Fuller, Robert
  • Canos Daros, Mª Jose
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
[EN] Personnel selection and reallocation are human resources policies that should be planned and implemented accurately because of their importance to the future of the company. When a person is hired, he or she represents an investment in human capital. This is the reason because managers have to use different tools in order to make good decisions. In this paper we present some fuzzy tools for personnel selection and reallocation processes and the advantages and disadvantages of their applying. Moreover, we show some examples, including the use of a specific software., [ES] Las políticas de selección y reasignación de recursos humanos deberían planearse y llevarse a cabo cuidadosamente a causa de su importancia en el futuro de las empresas. Cuando se contrata a una persona, la empresa está haciendo una inversión en capital humano. Por eso, los gerentes y directores deben usar diferentes herramientas que les permitan tomar una buena decisión. En este trabajo presentamos algunas herramientas basadas en matemáticas borrosas para procesos de selección y reasignación de personal y analizamos las ventajas e inconvenientes derivados de su aplicación. Además, mostramos algunos ejemplos, incluyendo el uso de un software específicamente diseñado., This work has been partially supported by the projects TIN2008-06872-C04-02/TIN and CORSARI MAGIC DPI2010-18243.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Verification of the reflective model of first order factors for reward and empowerment constructs, based on questionnaires derived from Lawler et al. (1991)

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Conci, Graziela
[EN] Purpose: High involvement practices have traditionally been classified in four main categories: training, communication, rewards and empowerment. In order to measure the degree of implementation of these programs, different questionnaires have been developed. In this paper, we have identified 3 types of questionnaires and we have deeply analyzed the psychometrical properties of one of these types: questionnaires derived from Lawler et al. (1991). The most recent investigation seems to show that psychometrical properties of both training and communication constructs are appropriate. However, it is necessary to work on rewards and empowerment scales. This research analyzes, by means of confirmatory factorial, two reflective measurement models, already present in the previous literature of rewards and empowerment scales. Design/methodology/approach: Spanish samples from 1997 (n=105), as well as United States ones (n=212 dating 1996 and n=143 dating 1999) have been used. Convergent and discriminant validity were tested. Findings and Originality/value: None of the models presents and acceptable adjustment in the used samples. Therefore, a possible future line of investigation in order to check whether the measurement model of rewards and empowerment constructs is formative instead of reflective, has been opened. Practical implications: Practitioners can profit from the results of this research because questionnaires validity will allow companies to have measurement and good practices diagnosis tools that can be used either for internal benchmarking or for the comparison with reference groups of companies. Originality/value: our paper identifies three questionnaire typologies used in the field of investigations of rewards and empowerment practices. We show that the point of view with which the scales of theses questionnaires have been treated has always been reflective. Moreover, this is one of the few papers that have checked the validity of the measurement model of questionnaires derived from Lawler et al. (1991). It questions the validity of a single questionnaire with similar samples, of different years, and simultaneously, with samples from same years but from different countries., The work described in this paper has been supported by the project "CORSARI MAGIC DPI2010-18243" by the Ministerio de Ciencia e Innovación del Gobierno de España within the Program de "Proyectos de Investigación Fundamental No Orientada"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Revisión de la literatura sobre la flexibilidad de decisión operacional

  • Maheut, Julien|||0000-0002-5796-9053
[ES] En este artículo se presenta una revisión de la literatura sobre la flexibilidad en la toma de decisiones operacionales en el contexto de planificación y gestión en las cadenas de suministro. Esta revisión reflexiona sobre algunas de las definiciones propuestas en la literatura sobre la flexibilidad en la planificación estratégica. Se propone una caracterización de los diferentes tipos de flexibilidad presentes en la literatura en función de las diferentes tareas de planificación existentes y de las diferentes consideraciones en el uso de los materiales., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "COORDINACION DE OPERACIONES EN REDES DE SUMINISTRO/DEMANDA AJUSTADAS, RESILIENTES A LA INCERTIDUMBRE: MODELOS Y ALGORITMOS PARA LA GESTION DE LA INCERTIDUMBRE Y LA COMPLEJIDAD". Asimismo, esta investigación también ha sido financiada mediante una beca doctoral concedida por la Generalitat Valenciana de España a Julien Maheut (Ref. ACIF/2010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A decision support system for modelling and implementing the supply network configuration and operations scheduling problem in the machine tool industry

  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Besga, Juan Manuel
  • Uribetxebarria, Jone
[EN] This paper presents a decision support system to simultaneously solve the supply network configuration problem and the operations scheduling problem for the machine tool industry. A novel database structure, which is able to consider alternative operations and alternative bills of material, has been used. An algorithm for complete enumeration to determine all the feasible solutions using stroke graphs is introduced. A multiagent-based simulator evaluates the different key performance indicators that the supply network deals with for each alternative solution (e.g. workload, profits, delivery times, etc.) to determine that ‘satisficed’ by the collaborative decision-making among its members. A case study based on a Spanish company that assembles highly customised machines and tools in several European plants is considered. From the experiments results based on data linked to this industry, it will be demonstrated that the tool is potentially useful for stakeholders and for the central decision-maker to make decisions collaboratively in a multisite context case, We thank the EWG-DSS and their four expert anonymous referees as well as the guest editorial board for their useful suggestions and criticism on earlier versions of this paper. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. NMP2-SL-2009-229333 and has been partially supported by the Spanish Ministry of Science and Innovation within the 'Proyectos de Investigacion Fundamental No Orientada Programme' through Project 'CORSARI MAGIC DPI2010-18243'. Julien Maheut holds a VALi+d grant funded by the Regional Valencian Government (Ref. ACIF/2010/222).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Etapas en la evolución de la mejora continua: Estudio multicaso, Levels in the evolution of continuous improvement: A multiple case study

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Bautista Poveda, Yolanda
  • García Sabater, Julio Juan|||0000-0001-9449-1709
[ES] Objeto: El modelo de evolución de la mejora continua en las empresas está en un estado intermedio de desarrollo. En investigaciones previas se han planteado y validado las etapas o niveles y los comportamientos o conductas asociadas a cada una de ellas en los procesos de mejora continua. Sin embargo no está clara la relación entre etapas, rutinas entendidas como conjuntos de comportamientos y facilitadores. En este trabajo se propone una definición conceptual diferenciada para los facilitadores y para las conductas de la mejora continua. También se ha recopilado y resumido un listado de los facilitadores que dan soporte al desarrollo de la mejora continua en la empresa y propone un modelo de cuándo y cómo se activan los facilitadores y el impacto que tienen esos facilitadores para ir avanzando en las diferentes etapas de evolución del programa de mejora continua. Diseño/metodología/enfoque: Estudio cualitativo multicaso con 4 empresas medianas, líderes en sus sectores, y con recursos económicos. Aportaciones y resultados: Presenta una propuesta de relación entre facilitadores, etapas de evolución y sus conductas asociadas y pone de manifiesto que la evolución de la implantación de la mejora continua no se trata de un continuo incremental, sino que existe un punto de discontinuidad entre las etapas 3 y 4, que exige un cambio radical en el proceso de implantación. Originalidad / Valor añadido: Extiende el modelo de Bessant, Caffyn y Gallagher (2001) explicitando cómo avanzar en el desarrollo de la implementación de unos niveles a otros superiores a través de la activación de los facilitadores adecuados. También presenta ejemplos de aplicación que pueden resultar muy ilustrativos para los directivos de producción. Además, plantea una secuencia de activación de los facilitadores que permite orientar a los mandos en la toma de decisiones relacionadas con la implantación y despliegue de la mejora continua en sus empresas., [EN] Purpose: The evolution model of continuous improvement is at an intermediate stage of development. Previous research had been raised and validated levels and behaviors of continuous improvement. However, there is no clear relationship between levels, routines in terms of group of behaviours, and enablers. We propose a differentiated conceptual definition for facilitators and for the behaviors. We have also collected and summarized a list of enablers that support the development of continuous improvement. In addition, we propose a model of when and how to activate the enablers and the impact of these enablers to go forward at different stages of evolution of the continuous improvement. Design/methodology: Qualitative Multicase study with 4 midsize businesses with financial resources and leaders in their industries. Findings: Presents a relationship between facilitators, phases of evolution and its associated behaviors and demonstrates that the evolution of the implementation of continuous improvement is not a continuous incremental, but there is a point of discontinuity between stages 3 and 4, which requires a radical change in the implementation process. Originality/value: Extend the model of Bessant et al. (2001) explaining how to advance the implementation to higher levels of continuous improvement through the activation of appropriate facilitators. It also presents examples of applications that can be very illustrative for production managers. Also raises an activation sequence of facilitators for guiding the manager in making decisions related to the implementation and deployment of continuous improvement in their companies., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "COORDINACION DE OPERACIONES EN REDES DE SUMINISTRO/DEMANDA AJUSTADAS, RESILIENTES A LA INCERTIDUMBRE: MODELOS Y ALGORITMOS PARA LA GESTION DE LA INCERTIDUMBRE Y LA COMPLEJIDAD" y del proyecto PAID-06-12-SP20120717 (UPV) PATH DEPENDENCE Y TOMA DE DECISIONES PARA SELECCIÓN DE HERRAMIENTAS Y PRÁCTICAS DE LEAN MANUFACTURING.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Is worker commitment necessary for achieving competitive advantage and customer satisfaction when companies use HRM and TQM practices?, ¿Es necesario el compromiso de los trabajadores para alcanzar ventajas competitivas y satisfacción del cliente cuando las compañías emplean prácticas de HRM y TQM?

  • Alfalla Luque, Rafaela
  • Medina Lopez, Carmen
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
[EN] There is mounting interest in both theory and practice regarding the relationship between Human Resource Management (HRM) and Total Quality Management (TQM), as well as the relationship between HRM and TQM and organisational performance. This paper focuses on the empirical explanation of the role of commitment as a form of mediation between the HRM or TQM practices and company competitiveness (competitive advantage and customer satisfaction). Light is also shed on the interrelationship between HRM and TQM practices testing the scope of influence of each HRM practice on TQM implementation, including the effect of HRM on individual TQM practices., [ES] Hay un creciente interés, tanto en los aspectos teóricos como en los prácticos, sobre la relación entre la gestión de los recursos humanos (HRM) y la gestión de la calidad total (TQM), así como sobre la relación entre HRM y TQM y los resultados empresariales. Este artículo realiza un estudio empírico que analiza el papel del compromiso de los trabajadores como variable mediadora entre las prácticas de HRM y TQM y la competitividad de la empresa (ventaja competitiva y satisfacción del cliente). También se analiza la relación entre las prácticas de HRM y TQM, determinando el efecto que cada práctica individual de HRM tiene sobre la implementación de TQM, así como el efecto en HRM de cada práctica de TQM., This paper has been made possible thanks to grant DPI2006-05531 (HPM Project-Spain: Project for high performance manufacturing) awarded by the Spanish Ministry of Education and Science and the project “CORSARI MAGIC DPI2010-18243” by the Spanish Ministry of Science and Innovation within the Program “Proyectos de Investigación Fundamental No Orientada”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards a path dependence approach to study management innovation

  • Perello-Marin, M Rosario|||0000-0001-9183-0568
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Marcos Cuevas, Javier
[EN] Purpose – Scholars in social sciences tend to use the term of path dependence without explaining exactly what they mean by it. Path dependence is a useful approach to understand the success or otherwise of the implementation of management innovation. The aim of this paper is to identify under which conditions it makes sense to talk about path dependence, and the relevance of using path dependence to the analysis of management innovation. Design/methodology/approach – The path dependence literature in different contexts and knowledge areas within social science is reviewed using a narrative approach. Findings – The concept of path dependence can be used to study management innovation, particularly when analyzing the introduction of new management practices. The authors argue that the order in which management practices are introduced has a profound effect on the outcomes for the organization. When the appropriate practices are introduced first, these create enhanced capabilities for the implementation of subsequent practices. If inappropriate practices are rolled out, they may severely impede management innovation and thus evolution and change of the firm. Research limitations/implications – This work highlights the need to conduct further research to understand the interaction between existing practices and the new ones. This study can be extended with an empirical work to corroborate the results presented here. Originality/value – By reviewing the different definitions of path dependence that exist in the literature, this paper will stimulate a debate on the necessary and sufficient conditions of path dependence and encourage a greater level of clarity in the management innovation area., The work described in this paper has been supported by the project “CORSARI MAGIC DPI2010-18243” by the Ministerio de Ciencia e Innovación del Gobierno de España within the Program de “Proyectos de Investigación Fundamental No Orientada”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptación organizativa a los cambios tecnológicos en la industria cultural. Un estudio a partir de la economía experimental

  • Benavides Espinosa, María del Mar
  • COMEIG RAMÍREZ, IRENE
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
[ES] Los cambios tecnológicos en la industria de la cultura exigen una adaptación de las empresas. La capacidad de adaptación de las orgaizaciones puede ser facilitada por diversos elementos de su estructura organizativa. El diseño organizativo de las empresas pertenecientes a la industria cultural debe ser adecuado para fomentar la creatividad, la autonomía de sus trabajadores, autorizar a que tomen sus propias decisiones y generar una cultura participativa. Todo ello, hace necesario la existencia de mecanismos de coordinación menos estructurados que refuercen la cohesión entre sus miembros y se consiga así una mayor integración entre sus elementos. Estos mecanismos de coordinación son fundamentalmente la utilización de equipos de trabajo, creación de sistemas de información y el desa rrollo de una determinada cultura organizativa. La revisión de los resultados obtenidos por los diferentes experimentos económicos ha mostrado que conseguir que el equipo se coordine para adaptarse a los cambios de forma eficiente depende, en línea con nuestras proposiciones teóricas, de distintos elementos de su estructura organizativa. Concretamente, cuanto más pequeños sean los equipos de trabajo (P1), más eficientes serán para adaptarse a los cambios tecnológicos que se dan en esta industria, pero necesitan de los sistemas de información para proporcionarles las directrices comunes a seguir (P2). La utilización de estos equipos genera una determinada cultura de trabajo que modela los comportamientos de sus miembros, pudiendo fomentar la cooperación entre ellos facilitando de esta manera la adaptación de la empresa a los cambios mencionados (P3). Eso sí, habrá que tener un especial cuidado en no mezclar las distintas subculturas que se formen en los distintos equipos ya que esto puede provocar problemas añadidos (P4). Además, como los equipos están compuestos por diversos especialistas autorizados para tomar sus propias decisiones, el líder adquiere un papel fundamental para coordinar sus decisiones. Dada la importancia del papel del líder como elemento de coordinación es conveniente que éste sea elegido por los miembros del equipo. Los resultados de los experimentos estudiados señalan la figura del líder (frente a la del directivo) como herramienta crítica transversal que une todos los elementos estudiados en este trabajo, tales como la toma de decisiones (centralización vs. descentralización), la autonomía y la creatividad (formalización y estandarización) y la cultura organizativa. En este trabajo proponemos la Economía Experimental como nuevo camino para la investigación de variables organizativas. Esta metodología novedosa ofrece la posibilidad de obtener resultados empíricos con control sobre las variables objeto de estudio además de permitir comparar varias situaciones para esas variables., Trabajo parcialmente financiado por los proyectos CORSARI MAGIC DPI2010-18243, TIN2008-06872-C04-02/TIN, GV/2012/047 y GV/2011/019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CSP Dinámico: Un algoritmo dinámico para la resecuenciación en un almacén de líneas en paralelo

  • Valero-Herrero, Maria
  • Molina Morte, Pablo
[EN] This paper shows the model used for resequencing where a selectivity bank consisting of parallel line segments is applied to reshuffle a given initial sequence and rule violations are to be minimized., [ES] En el presente trabajo se muestra el modelo utilizado para la resecuenciación en una línea de ensamblaje con mezcla de modelos donde un almacén con configuración en líneas en paralelo se utiliza para resecuenciar y minimizar la violación de restricciones de la línea de montaje., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "Coordinación de operaciones en redes de suministro/demanda ajustadas, resilientes a la incertidumbre: modelos y algoritmos para la gestion de la incertidumbre y la complejidad". Este trabajo también ha sido financiado parcialmente a partir del proyecto DPI2011-27633 y título “Programacion de produccion en cadenas de suministro sincronizadas multietapa con ensamblajes/desensamblajes con renovacion constante de productos en un contexto de innovación”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two extensions for the ALWABP: Parallel stations and collaborative approach

  • Araujo, Felipe F.B.
  • Costa, Alysson M.
  • Miralles Insa, Cristóbal Javier|||0000-0002-5269-9955
[EN] In this article, we introduce two new variants of the ALWABP that allow parallelization of and collaboration between heterogeneous workers. These new approaches suppose an additional level of complexity in the Line Design and Assignment process, but also higher flexibility; which may be particularly useful in practical situations where the aim is to progressively integrate slow or limited workers in conventional assembly lines. We present linear models and heuristic procedures for these two new problems. Computational results show the efficiency of the proposed approaches and the efficacy of the studied layouts in different situations., This research was supported by CAPES-Brazil and MEC-Spain (coordinated project CAPES-DGU 258-12/PHB-0012-PC) and by FAPESP-Brazil. We also thank the project ‘‘CORSARI MAGIC DPI2010-18243’’ of the Ministerio de Ciencia e Innovación del Gobierno de España within the Program ‘‘Proyectos de Investigación Fundamental No Orientada’’.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real companies demand of competences in higher education study plans

  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • Pons Morera, Carlos
[EN] In this paper we analyse competences and skills in Industrial Engineer degrees and in master’s degrees related with this field. We have identified them in the current study plans implemented in Spanish universities. We check the fit between the different competences and skills described in Spanish degrees and master's degree. Then, we compare these specific competences with a real business environment. We base this comparison in a study developed by Canós and Santandreu (2010), in which innovative companies highlighted some competences. There are some competences in study plans that are not mentioned by managers in the considered companies. We think this can be a reflection for new degrees and master's degrees study plans designers in order to complement current curricula and better fit it to real companies' requirements., Partially supported by the projects PIME A14/11, PAID-05-11-2846 and CORSARI MAGIC DPI2010-18243.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A two-stage sequential planning scheme for integrated operations planning and scheduling system using MILP: the case of an engine assembler

  • García Sabater, José Pedro|||0000-0002-9097-2852
  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, Julio Juan|||0000-0001-9449-1709
[EN] This paper presents an operations planning scheme based on mathematical programming models (specifically, Mixed-Integer Linear Programming (MILP) models) integrated into a web-enabled Advanced Planning and Scheduling System (APS), developed for and implemented in an engine assembler that supplies the car industry. One objective of this paper is to provide empirical insights into some operations planning characteristics in the automotive industry. The other main objective is to show MILP models and their use to create plans that enable the coordination of different planning levels (mid-term and short-term) and planning domains (procurement, production and distribution). The APS fulfills the requirements of an engine assembler in the automotive sector (namely lean-type constraints and objectives). The system is based on two MILP models, which have been purposely developed together along with their relations. The models presented herein provide a solution that considers supply chain objectives and constraints, and are integrated by means of data and constraints which have proven sufficient to fulfill users' and stakeholders' requirements. This case study presents the models' most relevant aspects and their implementation. © Springer Science+Business Media, LLC 2011., The work described in this paper has been partially supported by the Ministerio de Ciencia e Innovacion del Gobierno de Espana within the Program de "Proyectos de Investigacion Fundamental No Orientada through the project "CORSARI MAGIC DPI2010-1824300" and by the Universitat Politecnica de Valencia, through the Project PAID-05-2010-2741. Julien Maheut holds a Val I + D grant funded by the Generalitad Valenciana (Regional Valencian Government, Spain) (Ref. ACIF/2010). The authors wish to thank three anonymous reviewers for their comments which have greatly improved the paper. They also wish to thank the people at the factory and at the IT consultancy firm for their continuous support and encouragement.