Pasar al contenido principal

PROGRAMACION DE PRODUCCION EN CADENAS DE SUMINISTRO SINCRONIZADAS MULTIETAPA CON ENSAMBLAJES/DESENSAMBLAJES CON RENOVACION CONSTANTE DE PRODUCTOS EN UN CONTEXTO DE INNOVACION

DPI2011-27633

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Una revisión de las Tablas de Suplementos de la Organización Internacional del Trabajo, Time allowances of International Labour Organization: a review

  • Estelles-Miguel, Sofia|||0000-0001-6119-373X
  • Palmer Gato, Marta Elena
  • Albarracín Guillem, José Miguel|||0000-0001-6130-9405
  • Andrés Romano, Carlos|||0000-0003-4453-4891
[ES] Dentro de los estudios de Métodos y Tiempos, el cálculo de los coeficientes de fatiga es un aspecto fundamental por su impacto en la definición de los estándares de trabajo. Sin embargo, no hay un criterio universal al respecto ya que incluso la Organización Internacional del Trabajo (OIT) no llega nunca a definir una norma, sino que plantea unas recomendaciones de manera didáctica para que sean usadas por las partes afectadas si así lo consideran oportuno. En este trabajo se presentan el resultado de un análisis de estos criterios desarrollados en colaboración con la Comisión Técnica de Organización del Trabajo del Tribunal de Arbitraje Laboral de la Comunidad Valenciana realizado a partir de las tablas de suplementos existentes para su uso de manera interna en los procesos de arbitraje en los que participa la comisión., [EN] Time study can be defined as the application of a scientific method of determining process times using data collection and statistical analysis. The times that are calculated through a scientific study are used for various initiatives such as establishing accurate productivity goals, compiling objective data that compares automation/methods, identifying non-value-added time percentages, determining current staff utilization and identifying oppor tunities, quantifying gains through layout and/or method changes and reducing labor costs. Time study can be divided in some phases: element definition, rating and time measurement, base time determination, allowance definition and, finally, standard time definition. All of them have to be done carefully using a scientific approach because they involve human judgment. This is the reason because it is necessary to establish some criteria or rules to avoid subjective reasoning in these phases. This paper focuses in allowance definition. This is the process when a factor is defined to take into account the time for personal needs and fatigue in order to represent the time every worker must use to make the operation. The time factor is added to the calculated normal time to incorporate acceptable allowance for personal breaks and diminishing pace of work throughout a shift depending on the work being performed. Thus, in time studies, it is necessary to know appropriate allowances to allow people to recover from fatigue produced when they are in an environment that affects the way they work. Some practitioners determine allowances using careful and extensive studies taken on the job under regular working conditions. Other people prefer make agreements between management and labor. The authors’ experience is few factories can achieve an extensive study to define allowances, so they prefer to make agreements using previous results or some criteria taken from the literature. Unfortunately, there are no a universal criteria to establish personal allowances. Even International Labour Organization (ILO), doesn’t establish a universal rule. Instead of this, ILO suggests recommendations that can be used by the practitioners to define standard times. However, some times is difficult to adapt some of the ILO recommendations to Spanish industries. This is the reason a research was done to adapt some allowances from ILO to Spanish factories. The paper presents the results of the analysis that was performed in collaboration with the «Comisión Técnica de Organización del Trabajo del Tribunal de Arbitraje Laboral» at Valencian Community (spain). A set of criteria have been established based in ILO suggestions and other results taken from the literature. We will show some results about how these standard criteria are being used in time studies by the arbitration committee at valencian region. Key words: International Labour Organization (ILO), time, La parte final de este trabajo ha sido parcialmente financiado por el proyecto DPI2011-27633 denominado «Programación de producción en cadenas de suministro sincronizadas multietapa con ensamblajes / desensamblajes con renovación constante de productos en un contexto de innovación».
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The distributed assembly permutation flowshop scheduling problem

  • Hatami, Sara
  • Ruiz García, Rubén
  • Andrés Romano, Carlos|||0000-0003-4453-4891
Nowadays, improving the management of complex supply chains is a key to become competitive in the twenty-first century global market. Supply chains are composed of multi-plant facilities that must be coordinated and synchronised to cut waste and lead times. This paper proposes a Distributed Assembly Permutation Flowshop Scheduling Problem (DAPFSP) with two stages to model and study complex supply chains. This problem is a generalisation of the Distributed Permutation Flowshop Scheduling Problem (DPFSP). The first stage of the DAPFSP is composed of f identical production factories. Each one is a flowshop that produces jobs to be assembled into final products in a second assembly stage. The objective is to minimise the makespan. We present first a Mixed Integer Linear Programming model (MILP). Three constructive algorithms are proposed. Finally, a Variable Neighbourhood Descent (VND) algorithm has been designed and tested by a comprehensive ANOVA statistical analysis. The results show that the VND algorithm offers good performance to solve this scheduling problem., Ruben Ruiz is partially supported by the Spanish Ministry of Science and Innovation, under the project 'RESULT - Realistic Extended Scheduling Using Light Techniques' with reference DPI2012-36243-C02-01. Carlos Andres-Romano is partially supported by the Spanish Ministry of Science and Innovation, under the project 'INSAMBLE' - Scheduling at assembly/disassembly synchronised supply chains with reference DPI2011-27633.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CSP Dinámico: Un algoritmo dinámico para la resecuenciación en un almacén de líneas en paralelo

  • Valero-Herrero, Maria
  • Molina Morte, Pablo
[EN] This paper shows the model used for resequencing where a selectivity bank consisting of parallel line segments is applied to reshuffle a given initial sequence and rule violations are to be minimized., [ES] En el presente trabajo se muestra el modelo utilizado para la resecuenciación en una línea de ensamblaje con mezcla de modelos donde un almacén con configuración en líneas en paralelo se utiliza para resecuenciar y minimizar la violación de restricciones de la línea de montaje., El presente trabajo se ha desarrollado gracias a la ayuda DPI2010-18243 del Ministerio de Ciencia e Innovación del Gobierno de España dentro del programa de Proyectos de Investigación Fundamental no orientada, con el título "Coordinación de operaciones en redes de suministro/demanda ajustadas, resilientes a la incertidumbre: modelos y algoritmos para la gestion de la incertidumbre y la complejidad". Este trabajo también ha sido financiado parcialmente a partir del proyecto DPI2011-27633 y título “Programacion de produccion en cadenas de suministro sincronizadas multietapa con ensamblajes/desensamblajes con renovacion constante de productos en un contexto de innovación”