Pasar al contenido principal

ESTUDIO EXPERIMENTAL DE LA FUNCIONALIDAD Y SEGURIDAD DE LAS CARRETERAS CONVENCIONALES

TRA2013-42578-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Estudio de la velocidad desarrollada por vehículos pesados en carreteras convencionales

  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La velocidad de operación, definida como el percentil 85 de la distribución de velocidad de vehículos ligeros circulando en carreteras convencionales en condiciones de flujo libre, es una de las principales variables en la evaluación de la consistencia del diseño geométrico. De esta forma, los únicos vehículos considerados en el análisis son los vehículos ligeros, obviando la influencia de los vehículos pesados. Para la estimación de la velocidad de operación de estos vehículos el número de modelos existentes es mínimo. Por ello, el objetivo del trabajo que se presenta es el estudio experimental de la velocidad desarrollada por vehículos pesados en carreteras convencionales. El estudio no se centra únicamente en la velocidad de operación, sino en el estudio de la distribución completa de la velocidad, ya que los percentiles bajos están relacionados con el riesgo de alcance de vehículos ligeros. Se han analizado las diferentes variables que pueden influir con especial énfasis en las variables geométricas de la carretera. El estudio se ha basado en los datos obtenidos gracias a la colaboración de dos empresas, que han permitido la colocación de dispositivos GPS de 1 Hz en vehículos de su flota. Los GPS registraron de forma continua la velocidad desarrollada por los vehículos durante la realización de su ruta habitual. La influencia sobre el comportamiento de los conductores fue mínima al tratarse de un dispositivo de pequeño tamaño ubicado en el exterior del vehículo. Tras la restitución de la geometría de las carreteras objeto de estudio y el tratamiento de los datos de velocidad registrados, se analizó la influencia de las variables geométricas del trazado, especialmente en cuanto a alzado se refiere, en la velocidad. Se ha concluido que la pendiente no tiene una influencia significativa en la elección de la velocidad por parte de los conductores de vehículos pesados en curvas de carreteras convencionales, donde el principal control de la velocidad son los radios de las propias curvas., El estudio que se ha presentado es parte del proyecto de investigación “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013- 42578-P), subvencionado por el Ministerio de Economía y Competitividad y el Fondo Social Europeo. Asimismo, los autores quieren agradecer a las empresas SAV y SAEVI, así como la Entidad Metropolitana para el Tratamiento de Residuos en Valencia, por su colaboración totalmente desinteresada en toma de datos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of Low-Cost Driving Simulator Based on Continuous Speed Profiles

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
[EN] The number of road safety studies that are based on driving simulators is growing significantly. The Polytechnic University of Valencia, Spain, developed a low-cost driving simulator for the assessment, training, and rehabilitation of drivers (SE2RCO). The main objective of this research was the validation of the driving simulator so that studies about road safety and highway geometric design that considered human factors could be performed. The validation was based on continuous speed profiles collected from 28 volunteers on a 30-km-long, two-lane rural road section. The same volunteers drove through the same road section built in SE2RCO. Speed data of 79 curves and 52 tangents were selected for the analysis. Comparison of the real and simulated speeds ensured the simulator's objective validity according to average and operating speeds. Two models were developed to predict field speeds from simulated speeds. Results showed that a simulated average speed lower than approximately 90 km/h was linked to a similar real average speed. For higher simulated speeds, the average speed in the real environment was lower than the simulated one. In addition, the actual operating speed was around 5 km/h lower than the operating speed in the driving simulator. Most volunteers assessed the quality and similarity of the virtual environment compared with the real world as medium or high and assessed the driving tasks similarly, thus achieving subjective validation of the simulator., The authors thank the Polytechnic University of Valencia, which subsidized the research project CONSIM-Desarrollo de un Modelo para la Evaluacion de la Consistencia del Diseno Geometric de Carreteras Convencionales Mediante Simuladores de Conduccion. The study presented here was also part of the research project titled CASEFU-Estudio Experimental de la Funcionalidad y Seguridad de las Carreteras Convencionales, which was subsidized by the Spanish Ministry of Economy and Competitiveness and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

ANÁLISIS DE LA LONGITUD DE LAS RECTAS Y SU INFLUENCIA EN LA CONSISTENCIA DEL DISEÑO GEOMÉTRICO DE CARRETERAS CONVENCIONALES

  • García García, Alfredo|||0000-0003-1345-3685
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Díaz García, Jaime Sebastián
[ES] Los trazados que presentan rectas de elevada longitud fomentan que los conductores circulen a mayores velocidades, pudiendo alcanzar sus velocidades deseadas en la parte central de las mismas. Como consecuencia de ello, son grandes las reducciones de velocidad para afrontar las curvas posteriores. En cambio, con rectas cortas, las velocidades que se pueden desarrollar en las dos curvas de los extremos están condicionadas mutuamente para que no haya una reducción excesiva de la velocidad. Las reducciones excesivas de velocidad comprometen la adecuada consistencia de una carretera por lo que están correlacionadas con una mayor siniestralidad. La mayoría de modelos de velocidad de operación existentes han sido calibrados a partir de mediciones puntuales de velocidad. Para estimar los perfiles de velocidad de operación, se hace necesario incorporar unas reglas de construcción. La gran mayoría de ellas considera que los cambios de velocidad se producen solo a lo largo de la recta. En la investigación que se presenta, se ha analizado el comportamiento operacional de un gran número de conductores en las rectas, encontrando importantes diferencias respecto del comportamiento anterior. Analizando la evolución de la velocidad de operación observada en 70 secciones curva-recta-curva de carreteras convencionales se ha encontrado que la variación de velocidad se produce en una longitud superior a la propia recta; esa nueva longitud efectiva está conformada por la longitud de la recta más un cierto desarrollo de las curvas adyacentes. Los resultados apuntan a que la longitud empleada para variar la velocidad antes y después de las rectas es de unos 145 m, independientemente de la configuración geométrica. Adicionalmente, se han comparado los resultados del análisis geométrico y operacional de las secciones con los criterios correspondientes de la nueva Instrucción de Trazado de Carreteras, encontrando disparidades manifiestas y planteándose mejoras a la misma, siendo el punto de mayor discrepancia las reducidas longitudes que esta emplea para considerar algunas rectas como no independientes. Se han encontrado tres niveles de independencia de las rectas a diferencia de los dos niveles tradicionalmente empleados a nivel internacional., El desarrollo de esta investigación se enmarca dentro del proyecto “CASEFU – Estudio Experimental de la Funcionalidad y Seguridad de las Carreteras Convencionales”, con referencia TRA2013-42578-P, subvencionado por el Ministerio de Economía y Competitividad. Asimismo, la toma de datos continuos de velocidad en la que está basada este proyecto se llevó a cabo dentro del proyecto “REVEL – Una Metodología para la Revisión de los Límites de Velocidad”, de referencia PT-2006-031-25 IAPP, gracias a la subvención parcial recibida del Centro de Estudios y Experimentación de Obras Públicas (Ministerio de Fomento).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Examination Free-Flow Speed Distribution on Two-Lane Rural Roads

  • García Jiménez, María Elena
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Free-flow speed variation of passenger vehicles along a road segment is one of the most used factors in road safety studies, as a surrogate measure to evaluate road design consistency. Free-flow speed may be measured when a road segment is already built but must be estimated during the design phase. Several studies have been carried out to calibrate models to estimate free-flow speed, with geometric features as explanatory variables. Currently, most free-flow speed models focus only on mean speed or speed in particular percentiles, such as the 85th or 95th. Moreover, most studies have assumed normality in the free-flow speed distribution without checking this hypothesis. The main objective of this study was to analyze the free-flow speed distribution on two-lane rural road curves and tangents. The research focused on two main issues: determining whether speed data were normally distributed at a specific site and analyzing the behavior of the mean and standard deviation of speed on curves and tangents. The study was based on continuous operating speed profiles, which were obtained from a database of more than 16,000 vehicles/km. A total of 63 horizontal curves and 78 tangents were analyzed. According to the results, the normal distribution is not the best distribution in most cases for describing free-flow speeds. In 46 of the curves and 64 of the tangents, free-flow speed cannot be assumed to be normally distributed. Therefore, some other distributions should be tested in further research., The study presented in this paper is part of the research project CASEFU-Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales, subsidized by the Spanish Ministry of Economy and Competitiveness and the European Social Fund. In addition, the authors thank the Center for Studies and Experimentation of Public Works of the Spanish Ministry of Public Works for subsidizing the field data collection, and the Infrastructure and Transportation Department of the General Directorate of Public Works of the Valencian Government, the Valencian Provincial Council, and the Ministry of the Interior, especially the General Directorate of Traffic of Spain, for their cooperation in gathering the field data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of horizontal geometric design of two-lane rural roads on vehicle CO2 emissions

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[EN] In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions. This study aims to evaluate the impact of road horizontal alignment on CO2 emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO2 emission rate for each homogeneous road segment was estimated as the average of CO2 emission rates of all vehicles driving, estimated by applying the VT-Micro model. The analysis concluded that CO2 emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO2 emission rates and they increase even more on roads with high speed dispersions. Based on this data, several regression models were calibrated for different vehicle types to estimate CO2 emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design., The study presented in this paper is part of the research project titled "CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales" (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness and the European Social Fund. In addition, the authors would like to thank the Center for Studies and Experimentation of Public Works (CEDEX) of the Spanish Ministry of Public Works for subsidizing the field data collection and the General Directorate of Public Works and Transportation of the Valencian Government, to the Road Department of the Valencian Provincial Council, and to the Spanish Ministry of the Interior, especially the General Directorate of Traffic of Spain, for their cooperation in field data gathering. Finally, we would like to thank Professor Hesham A. Rakha, Virginia Tech (USA), for providing the VT-Micro model and assessing the authors in its use to obtain outcomes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Influence of Geometric Design Consistency on Vehicle CO2 Emissions

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Highway vehicles driving on rural roads account for more than 50% of all CO2 emissions produced by the transportation sector in Europe. Although the policy measures to mitigate Greenhouse Gas emissions are increasing, these do not include policies aimed at reducing emissions by means of highway geometric design, which significantly influences drivers¿ speeds and accelerations and, consequently, plays a major role on fuel consumption and emissions. Therefore, the main objective of this research is to study the influence of the geometric design consistency on vehicle CO2 emissions. To do this, continuous speed data were collected on 47 homogeneous road segments by means of Global Positioning System devices. Vehicle CO2 emissions were estimated by applying the VT-micro model, whereas geometric design consistency was assessed considering different global consistency models. As a conclusion, vehicle CO2 emissions decreases as the consistency level of a homogeneous road segment increases. Specifically, a good consistency road segment has been found to present an emission rate 20-30% lower than a poor-consistent one. Therefore, the design of consistent roads allows, in addition to maximize road safety, to help to achieve more environmentally sustainable highways, reducing CO2 emission production., The presented study is part of the research project titled “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), subsidized by the Spanish Ministryof Economy, Industry, and Competitiveness and the European Social Fund. In addition, authors would like to thank Professor Hesham A. Rakha, Virginia Tech (USA), for providing the VT-Micro model and assessing the authors in its use to obtain outcomes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time-Based Calibration of the Inertial Operating Speed to Enhance the Assessment of the Geometric Design Consistency

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
  • Bella, Francesco
[EN] Road crashes are mainly caused by three concurrent factors: infrastructure, vehicle, and human factors. The interaction between the infrastructure and human factors leads to the concept of geometric design consistency. Recently, a global consistency model was developed based on the difference between the inertial operating speed profile and the operating speed profile. The first was defined as the weighted average operating speed of the previous road section based on distance, and represents drivers¿ expectancies, whereas the second represents road behavior. However, drivers¿ expectancies are related to short-term memory which declines gradually and depends on time. Thus, a time-based inertial operating speed would allow a more accurate estimation of the phenomenon. This research analyzes different periods of time and weighting distributions to identify how drivers¿ expectancies should be estimated. A set of 71 homogeneous road segments located in Italy were considered in the study. As a result, 25 seconds and a convex parabolic distribution should be used to calculate the inertial operating speed profile. This new way of estimating drivers¿ expectancies showed better results than those obtained based on distance. Finally, the proposed consistency model was compared with the previous models and was found to be able to assess more accurately the geometric design consistency. Therefore, the proposed consistency model is a useful tool for engineers to estimate the number of crashes so that they can incorporate road safety considerations into the geometric design of either new two-lane rural roads, or improving the existing ones., This research was subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness through ‘‘Ayudas a la movilidad predoctoral para la realizacio´n de estancias breves en centros de I+ D 2015.’’ The study presented in this paper is also part of the research project entitled ‘‘CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales’’ (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness and the European Social Fund. In addition, the authors would like to thank the ‘‘Azienda Nazionale Autonoma delle Strade’’ (ANAS) and the ‘‘Automobile Club Italia’’ (ACI), who provided traffic and crash data, respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration of Inertial Consistency Models on North Carolina Two-Lane Rural Roads

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
  • Findley, Daniel J.
[EN] Road crash occurrence is closely related to the geometric design consistency, which can be defined as how drivers¿ expectancies and road behavior fit. To this regard, the crash rate on a road segment increases as its consistency level decreases. To assess this phenomenon, inertial consistency models were recently developed. These models are based on the difference between the inertial operating speed, which represents drivers¿ expectancies, and the operating speed, which represents road behavior. The higher the difference between both speeds, the higher the likelihood of crash occurrence. This research aims to validate and calibrate these consistency models on American two-lane rural roads. For this, a total of 194 homogeneous road segments and 977 horizontal curves along 665 km in North Carolina (US) were used. As a result, the geometric design consistency was identified as a major factor of crash occurrence. The higher the difference between drivers¿ expectancies and road behavior, the higher the crash rate. Likewise, the greater the consistency level, the greater the percentage of horizontal curves without reported crashes. A Safety Performance Function was also calibrated to estimate the number of crashes on a road segment. Consistency thresholds were defined and tested to identify where these crashes are more likely to take place. Finally, the results obtained in this study were compared with those obtained previously on Spanish highways. To this regard, the crash rate on an American highway was 1.85 times greater than those observed on a Spanish highway under the same risk exposure and consistency conditions. Therefore, different tools were developed to enhance the assessment of road safety to the geometric design of both new two-lane rural roads and improvements of existing highways., This research was subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness through “Ayudas a la movilidad predoctoral para la realización de estancias breves en centros de I+D 2017” (EEBB-I-17-12154). The study presented in this paper is also part of the research project titled “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness and the European Social Fund. In addition, the authors would like to thank the North Carolina Department of Transportation (NCDOT), which provided traffic and crash data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modification of the Highway Capacity Manual two-lane highway analysis procedure for Spanish conditions

  • Moreno Chou, Ana Tsui
  • Llorca García, Carlos
  • Washburn, Scott
  • Bessa Jr., José Elievam
  • Hale, David K
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two-lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two-lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables., The research was funded by the Spanish Ministry of Economy and Competitiveness (TRA2013-42578-P) and has been partially developed as a result of a mobility stay at the University of Florida funded by the Spanish Ministry of Economy and Competitiveness (EEBB-I-15-09970). The research was completed with the support of the FPI Research and Teaching Fellowship of the Spanish Ministry of Economy and Competitiveness (BES-2011-044612) and the TUM University Foundation Fellowship (TUFF) for international postdocs. We would like to thank Dr Lemke from the Bundesanstalt fur Straaenwesen (Federal Highway Research Institute) for providing the book from Brannolte and Holz [13] and the final reports of the research projects FE-Nr. 02.155G92 [12] and FE 16.0015/2009 [11].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Operating speed models for heavy vehicles on tangents of two-lane rural roads

  • González-Hernández, Brayan
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Road safety is one of the most important public health concerns in our society. In Spain, most road crashes involving heavy vehicles occur on two-lane rural roads. However, current road safety assessment procedures only rely on the analysis of the operating speed profile for passenger cars due to the few speed models available for heavy vehicles. Therefore, the main objective of this research was to analyze and model the free flow truck speeds on tangents of two-lane rural roads. To do this, the continuous speed profiles of 83 drivers travelling with their own heavy vehicle were collected by means of Global Positioning System tracking devices on 12 road sections. As a result, two different patterns were identified, which were associated with unloaded (35-54 kg/kW) and loaded (112-131 kg/kW) trucks. The most influential variables on truck speeds were tangent length, the grade of the tangent, the Curvature Change Rate of the tangent and its adjacent horizontal curves, and the speed of the preceding horizontal curve. Finally, several regression models were calibrated to predict the 85th percentile speeds for both loaded and unloaded trucks., The study presented in this paper is part of the research project titled CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales . This work was supported by the Spanish Ministry of Science, Innovation, and Universities and the European Social Fund (TRA2013-42578-P). In addition, the authors would like to thank the companies Agricultores de la Vega de Valencia (SAV) S.L., Saevi S.L., and Abonos Orgánicos Montagut (AOM) S.L., for their cooperation in field data gathering.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling vehicles acceleration during overtaking manoeuvres

  • Llorca Garcia, Carlos
  • Moreno, A. T.
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Abstract: Overtaking manoeuvre is a key issue for two-lane rural roads. These roads should provide sufficient overtaking sight distance (OSD) at certain locations to allow faster vehicles to pass slower ones. However, overtaking requires occupying the opposing lane, which represents a serious safety concern. Severity of overtaking related crashes is very high, compared with other manoeuvres. The development of advanced driver assistance systems (ADAS) for overtaking is being a complex task. Only few systems have been developed, but are not still in use. This research incorporated accurate data of real manoeuvres to improve the knowledge of the phenomenon. The trajectory of the overtaking vehicles on the left lane was observed. An instrumented vehicle measured the overtaking time and distance, the abreast position, and the initial and final speed of 180 drivers that passed it during a field experiment. Six different kinematic models (such as uniform acceleration or linear variation of acceleration) were calibrated. Generally, drivers started to accelerate before changing to the opposing lane. These models may be applied to ADAS, to estimate OSD and to improve microsimulation models., Part of this research was included in the project 'Desarrollo de modelos de distancias de visibilidad de adelantamiento', with reference code TRA2010-21736 and subsidised by the Spanish Ministery of Economy and Competitivity. The authors also thank Prof Dr Sayed, from University of British Columbia, for his valuable review.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparison of the highway safety manual predictive method with safety performance functions based on geometric design consistency

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
  • Findley, Daniel J.
[EN] Road safety is a major public health concern in our society. Effective road design and accurate safety analyses must be a component of programs focused on reducing and eliminating roadway injuries and deaths. Various methodologies exist to determine the expected number of crashes on rural two-lane rural roads. This research compares different procedures which allow for the estimation of the number of crashes on homogeneous road segments. In this effort, a total of 27 two-lane rural road sections located in North Carolina were considered, resulting in 59 homogeneous road segments composed of 350 horizontal curves and 375 tangents along 150 km of road. Four methods were applied to the selected roadways: the Highway Safety Manual predictive method, two jurisdiction-specific Safety Performance Functions (SPFs), and a SPF which includes a consistency parameter. This research found that the use of SPFs which incorporate a consistency parameter allows highway engineers to consider human factor impacts on road safety assessment. The use of a consistency parameter can also simplify the crash estimation process. Analysis methods which only included local geometric variables provided unreliable results due to the calibration of only the specific road elements instead of their relationship with other road elements along homogeneous road segments., This research was subsidized by the Spanish Ministry of Science, Innovation, and Universities through "Ayudas a la movilidad predoctoral para la realizacion de estancias breves en centros de I+D 2017" (EEBB-I-17-12154) and is part of the research project titled "CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales" (TRA2013-42578-P), subsidized by the above mentioned Spanish Ministry and the European Social Fund. In addition, the authors would like to thank the North Carolina Department of Transportation, which provided traffic and crash data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Seguridad De Ciclistas Circulando En Pelotón En Carretera Convencional

  • Llorca García, Carlos
  • Serra Planelles, Jorge
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La afluencia de ciclistas aficionados en carreteras convencionales para la práctica de actividades deportivas es muy notable, llegando en algunos casos a que la intensidad de tráfico ciclista supere a la de tráfico motorizado. Sin embargo, la presencia de ciclistas compartiendo la infraestructura con vehículos supone un problema para la seguridad vial. Los accidentes relacionados con alcances, adelantamientos o salidas de vía tienen consecuencias muy graves, debido a la diferencia de velocidad y tamaño entre bicicletas y vehículos y a la falta de protección del cuerpo del ciclista ante un accidente.En particular, la disposición de los ciclistas al circular en la vía (individualmente, en línea, en paralelo, etc.) puede afectar a su visibilidad, capacidad de reacción y margen de seguridad disponible en las maniobras de adelantamiento realizadas por el tráfico motorizado. Esta investigación caracterizó las trayectorias y la posible invasión del sentido contrario de los vehículos a motor, cuando adelantaron a ciclistas dispuestos en diversas configuraciones de pelotón (individual, 2 en línea, 2 en paralelo).Para ello, se hizo circular a tres ciclistas, en configuraciones previamente fijadas, por un tramo de carretera convencional. Las bicicletas fueron equipadas con distanciómetros láser, medidores de velocidad, GPS cámaras de video, y un pulsador mediante el que los ciclistas valoraban el riesgo percibido cada vez que un vehículo motorizado les rebasaba. El análisis de los datos obtenidos permitió comparar, en las diversas configuraciones de pelotón, la distribución de las distancias laterales durante el adelantamiento, las velocidades de los vehículos que adelantan, y el nivel de riesgo percibido.Los resultados obtenidos proporcionaron criterios para evaluar los riesgos de circular en cada una de las configuraciones, en base a características objetivas (separación, velocidad o tipo de vehículo), y subjetivas (percepción de riesgo)., Este estudio se enmarca en el proyecto “CASEFU, Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” con referencia TRA2013-42578-P, subvencionado por el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a global inertial consistency model to assess road safety on Spanish two-lane rural roads

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The most important factors for road crash occurrence are infrastructure, vehicle, and human factors. In fact, infrastructure and its interaction with human factor have been thoroughly studied in recent years through geometric design consistency, which can be defined as how drivers¿ expectations and road behavior relate. Global consistency models were calibrated in the last decade to assess road safety on an entire homogeneous road segment. However, none of them include the underlying consistency phenomenon in their formulation. Recently, a new model was developed based on the difference between the inertial operating speed profile, which represents drivers¿ expectancies, and the operating speed profile, which represents road behavior. While the operating speed represents the estimated operating speed for every location along the road, the inertial operating speed aggregates for every station the operating speed effect along some distance already covered by drivers. The authors hypothesized that this `aggregation effect¿ was connected to drivers¿ expectancies, which proved to be true based on the best model fitted. However, the exact distance (or time) that should be considered to estimate the inertial operating speed still remains unknown. This paper aims to complete this model, analyzing how the inertial operating speed varies depending on different distances and periods of time. This impact is measured considering the reliability of the corresponding consistency model. The paper also covers how the inertial operating speed should be determined along the final distance or time. For this, a total of 184 homogeneous road segments along 650¿km in Spain were used., The study presented in this paper is part of the research project titled "CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales" (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy, Industry and Competitiveness and the European Social Fund. In addition, the authors would like to thank the Department of Housing, Public Works and Spatial Planning of the Valencian Regional Government and the Traffic Department of the Spanish Government, which provided traffic and crash data, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

VELOCIDAD DE OPERACIÓN DE VEHÍCULOS LIGEROS EN CURVAS DE CARRETERAS CONVENCIONALES

  • García Jiménez, María Elena
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La velocidad de operación es uno de los factores más estudiados en el análisis de la seguridad vial por su relación con la siniestralidad. En la fase de explotación es relativamente sencillo calcular la velocidad de operación a partir de datos empíricos, pero, en las fases de planeamiento y de proyecto, sólo será posible estimarla. Numerosos autores han modelizado la velocidad de operación de vehículos ligeros en curvas de carreteras convencionales considerando su velocidad mínima. Algunos a partir de observaciones en aquellos puntos de la carretera más significativos como el punto medio de la curva (velocidad mínima), otros a partir de datos continuos utilizando, por ejemplo, dispositivos GPS. La mayoría de los modelos que estiman esta velocidad se basan únicamente en el percentil 85 de la distribución o en su velocidad media. Además, la mayoría de los estudios asumen que sus datos se distribuyen según una normal sin, en muchos casos, comprobar dicha hipótesis. El objetivo de este estudio es analizar la distribución de la velocidad desarrollada por vehículos ligeros circulando en condiciones de flujo libre en curvas de carreteras convencionales. Para ello, la investigación se basa en determinar si los datos de velocidad de 63 curvas disponibles de una base de más de 16.000 vh·km se distribuyen según una normal, y en el análisis del comportamiento de la media y la desviación típica de la distribución de velocidades en curvas. Se ha concluido que la distribución normal no es la que mejor se ajusta al comportamiento de la velocidad en la mayoría de los casos., El estudio que se ha presentado es parte del proyecto de investigación “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013- 42578-P), subvencionado por el Ministerio de Economía y Competitividad y el Fondo Social Europeo. Asimismo, los autores quieren agradecer al Centro de Estudios y Experimentación de Obras Públicas (CEDEX) del Ministerio de Fomento por subvencionar la investigación en la que se llevó a cabo la toma de datos, a la Dirección General de Obras Públicas, Transporte y Movilidad de la Conselleria de Vivienda, Obras Públicas y Vertebración del Territorio, a la Diputación de Valencia, y al Ministerio del Interior, especialmente a la Dirección General de Tráfico, por su colaboración en la toma de datos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

ANÁLISIS DEL COMPORTAMIENTO DE CONDUCTORES EN CURVAS DE BAJO ÁNGULO DE DEFLEXIÓN

  • Ulpiano Cogollos, José Luis
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[ES] Las curvas con un bajo ángulo de deflexión pueden ser un problema para la percepción por parte de los conductores. Para evitar este aspecto, las diferentes normativas establecen criterios de desarrollo o radios mínimos, que las haga apreciables por los conductores. Los criterios que están incorporados en las normativas españolas nunca tuvieron una base experimental científica sino fueron fruto de juicios técnicos. Los objetivos de esta investigación son analizar la percepción subjetiva y caracterizar la respuesta de los usuarios de carreteras convencionales ante curvas de bajo ángulo de deflexión, para conseguir unas recomendaciones de diseño para este tipo de curvas. Estas curvas se restituyen geométricamente con el objetivo de identificar cuál servirá para un posterior estudio más detallado in situ. Para ello se presenta el diseño y desarrollo de un cuestionario online, el cual incorpora una base de datos de curvas de bajo ángulo de deflexión presentes en carreteras convencionales españolas. El cuestionario consiste en mostrar a un amplio número de conductores una serie de vídeos aleatorios donde se visualiza, desde el punto de vista del usuario de la carretera, el recorrido de varias de las curvas. Tras este paso, los encuestados deben expresar su percepción y comportamiento a través de varias preguntas de tipo abierto y cerrado. Estos resultados quedan registrados en una base de datos, para su posterior filtrado, tratamiento e interpretación estadística., La presente investigación es parte del proyecto “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (referencia TRA2013-42578- P), que pretende actualizar el modo en el que se diseñan las carreteras convencionales en España atendiendo a criterios de operación, seguridad y funcionalidad. Dicho proyecto está financiado por el Fondo Social Europeo y el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Análisis y Validación de la Consistencia en un Simulador de Conducción

  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[ES] Muy diversas investigaciones previas han mostrado cómo la percepción del riesgo afecta el comportamiento de los conductores. Muchas de ellas van dirigidas a observar la diferencia de percepción entre conductores experimentados y noveles, o entre el riesgo objetivo y el percibido. Mientras que el riesgo objetivo puede ser obtenido a partir de las estadísticas de siniestralidad, el riesgo percibido es más complicado de evaluar. Existen diversos métodos, yendo desde la encuesta directa hasta técnicas de rastreo de la visión.En este estudio se presenta una nueva metodología para recoger datos de Percepción Subjetiva de Riesgo (PSR) de forma quasi-naturalística. Con esta metodología, los conductores pueden indicar de forma sencilla su percepción de confort tras recorrer cada una de las curvas que compone un trazado. Posteriormente, la correlación de estos datos con la geometría de las curvas y otras variables permite derivar sencillas reglas para obtener un diseño consistente de la carretera. Igualmente, si esta metodología es válida para ser llevada a cabo en un entorno simulado, permitiría evaluar carreteras en fase de proyecto, convirtiéndose en una valiosa herramienta para los ingenieros.Un total de 28 conductores participaron en la toma de datos, recorriendo el mismo tramo de carretera en la realidad y en entorno simulado, de 32 km. En ambos casos indicaron su percepción de PSR tras cada una de las curvas aisladas. En este estudio se muestran los resultados alcanzados, tanto en el entorno real como el simulado. Igualmente, se establecen conexiones y correlaciones entre ambos métodos, mostrando bajo qué condiciones el entorno simulado arroja valores válidos., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New consistency model based on inertial operating speed profiles for road safety evaluation

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
  • Bella, Francesco
[EN] Road crashes are mainly caused by three concurrent factors: infrastructure, vehicle and human factor. The interaction between infrastructure and human factor leads to the concept of geometric design consistency, which can be defined as how driver¿s expectations and road behavior fit. This paper presents a new global consistency model based on the difference between the inertial operating speed profile (Vi) and the operating speed profile (V85). The first one is calculated as the weighted average speed of the previous road section and represents drivers¿ expectations, whereas the second one represents road behavior. A set of 71 homogeneous two-lane rural road segments located in Italy were used in the calibration of the model. As a result, a Safety Performance Function based on this new consistency model was proposed in order to estimate the number of crashes in an entire road segment. Finally, the new model was compared with previous global consistency models, concluding that the new consistency parameter better explains the phenomenon than the previous ones. Therefore, the new consistency model is a useful tool for the engineers which allows estimating the number of crashes and incorporate road safety to the geometric design of both new two-lane rural roads and improvements of existing highways., This research was subsidized by the Spanish Ministry of Economy and Competitiveness through "Ayudas a la movilidad predoctoral para la realizacion de estancias breves en centros de I+D 2015." The study presented in this paper is also part of the research project titled "CASEFU-Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales" (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy and Competitiveness and the European Social Fund. In addition, the authors would like to thank the Azienda Nazionale Autonoma delle Strade (ANAS) and the Automobile Club Italia (ACI), which provided traffic and crash data, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Validación de un simulador de conducción de bajo coste para el diseño de carreteras convencionales

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • García García, Alfredo|||0000-0003-1345-3685
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
[ES] La cantidad de estudios de seguridad vial basados en simuladores de conducción está en continuo crecimiento. En este sentido, la Universitat Politècnica de València (UPV) ha desarrollado un simulador de conducción de bajo coste: SE2RCO (Simulador para la Evaluación, Entrenamiento y Rehabilitación de Conductores). El principal objetivo de la investigación es la validación de este simulador, con el fin de desarrollar estudios relacionados con la seguridad vial y el diseño geométrico de carreteras incorporando el factor humano. Dicha validación se ha realizado a partir de la observación en campo de los perfiles continuos de velocidad desarrollados por 28 voluntarios conduciendo su propio vehículo en un tramo de carretera convencional de 30 km. Los mismos voluntarios condujeron posteriormente en el simulador de conducción ese mismo tramo de carretera reconstruido en un entorno virtual. Un total de 79 curvas y 52 rectas fueron objeto de análisis. La comparación entre las velocidades desarrolladas en la realidad y las observadas durante la simulación permitieron llevar a cabo la validez objetiva del simulador de conducción. Los resultados mostraron que la velocidad media en el simulador y en la realidad era similar cuando la velocidad simulada era inferior a 87.3 km/h. En caso de ser superior, la velocidad media en la realidad era menor que en el simulador. En cuanto a la velocidad de operación, se observó que la velocidad real era aproximadamente 5 km/h menor que la simulada. Finalmente, estos resultados estuvieron apoyados por la percepción de los conductores, ya que la mayoría de ellos evaluaron la calidad del entorno simulado y el grado de similitud entre la tarea de conducción real y simulada como medio o alto, consiguiendo de esta manera la validez subjetiva del simulador de conducción., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration of the inertial consistency index to assess road safety on horizontal curves of two-lane rural roads

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[EN] One of every four road fatalities occurs on horizontal curves of two-lane rural roads. To this regard, many studies have been undertaken to analyze the crash risk on this road element. Most of them were based on the concept of geometric design consistency, which can be defined as how drivers¿ expectancies and road behavior relate. However, none of these studies included a variable which represents and estimates drivers¿ expectancies. This research presents a new local consistency model based on the Inertial Consistency Index (ICI). This consistency parameter is defined as the difference between the inertial operating speed, which represents drivers¿ expectations, and the operating speed, which represents road behavior. The inertial operating speed was defined as the weighted average operating speed of the preceding road section. In this way, different lengths, periods of time, and weighting distributions were studied to identify how the inertial operating speed should be calculated. As a result, drivers¿ expectancies should be estimated considering 15¿s along the segment and a linear weighting distribution. This was consistent with drivers¿ expectancies acquirement process, which is closely related to Short-Term Memory. A Safety Performance Function was proposed to predict the number of crashes on a horizontal curve and consistency thresholds were defined based on the ICI. To this regard, the crash rate increased as the ICI increased. Finally, the proposed consistency model was compared with previous models. As a conclusion, the new Inertial Consistency Index allowed a more accurate estimation of the number of crashes and a better assessment of the consistency level on horizontal curves. Therefore, highway engineers have a new tool to identify where road crashes are more likely to occur during the design stage of both new two-lane rural roads and improvements of existing highways., The study presented in this paper is part of the research project titled "CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales" (TRA2013-42578-P), subsidized by the Spanish Ministry of Economy, Industry and Competitiveness and the European Social Fund. In addition, the authors would like to thank the Department of Housing, Public Works and Spatial Planning of the Valencian Regional Government and the Traffic Department of the Spanish Government, which provided traffic and crash data, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Speed Prediction Models for Trucks on Horizontal Curves of Two-Lane Rural Roads

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
  • González-Hernández, Brayan
[EN] Road safety is closely related to geometric design consistency, which is usually assessed by examining operating speed. Most consistency models only consider passenger car speeds, even though the interaction between passenger cars and heavy vehicles plays a pivotal role in road safety. This is due to the fact that there are too few models to estimate heavy vehicle speeds. This study aims to develop speed prediction models for heavy vehicles on horizontal curves of two-lane rural roads. To do this, continuous speed profiles were collected by using Global Positioning System (GPS) tracking devices on 11 road sections. Truck speeds were analyzed on 105 horizontal curves. The results showed that the radius of the horizontal curve and the grade at the point of curvature have a significant influence on heavy vehicle speeds. In this regard, vertical alignment only has a significant effect on truck speeds along upgrades. In addition, different trends were identified for loaded and unloaded trucks, so different speed models were calibrated for each of them. As a result, heavy vehicle speeds were adversely affected by grades greater than 3%. This phenomenon was larger for loaded trucks than for unloaded ones. Finally, the calibrated 85th and 15th percentile speed models were compared with those developed previously. As a conclusion, the use of the proposed models in this study was recommended on Spanish two-lane rural roads due mainly to the different characteristics of heavy vehicles around the world., The study presented in this paper is part of the research project titled ‘‘CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales’’ (TRA2013-42578- P), subsidized by the Spanish Ministry of Economy, Industry, and Competitiveness and the European Social Fund. In addition, the authors would like to thank the companies SAV, SAEVI, and OAM, for their cooperation in field data gathering.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Operational Considerations of Passing Zones for Two-lane Highways: Spanish Case Study

  • Moreno Chou, Ana Tsui
  • Llorca Garcia, Carlos
  • Washburn, Scott
  • Bessa Jr., José Elievam
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The U.S. Highway Capacity Manual (HCM 2010) methodology is used in Spain to evaluate traffic operation and quality of service. In two-lane undivided highways, the effect of limiting where drivers could pass slower vehicles, or passing restrictions, is considered through the percentage of no-passing zones. This measure does not account for how passing opportunities are distributed along the road. The objective of this research was to evaluate the effect percentage of no-passing zones and average passing zone length on two-lane, and incorporate them in the analysis methodology, if significant. The TWOPAS microsimulation program was calibrated and validated to the Spanish conditions. Passing restrictions had little effect on average traffic speed (ATS), with differences lower than 6 km/h between a segment of road with no passing restrictions and a segment of a road with 100% of length with passing restriction. Conversely, passing restrictions can increase percent time spent following (PTSF) up to 30%. Increasing the passing zone length beyond 2,000 m does not improve PTSF. The new models could be used to better estimate traffic operation on Spanish two-lane highways., The research was funded by the Spanish Ministry of Economy and Competitiveness [TRA2013-42578-P], and has been partially developed as a result of a mobility stay at the University of Florida funded by the Spanish Ministry of Economy and Competitiveness [EEBB-I-15-09970]. The research was completed with the support of the FPI Research and Teaching Fellowship of the Spanish Ministry of Economy and Competitiveness [BES-2011-044612] and the TUM University Foundation Fellowship (TUFF) for international postdocs. We would like to thank Dr. Lemke from the Bundesanstalt fur Strassenwesen (Federal Highway Research Institute) for providing the final report of the research project FE 16.0015/2009 (23). This work was supported by the German Research Foundation (DFG) and the Technical University of Munich (TUM) in the framework of the Open Access Publishing Program.