Pasar al contenido principal

WALKIE-TALKIE: SOPORTE A ENTORNOS DE TRANSPORTE SEGURO, INTELIGENTE Y SOSTENIBLE PARA LA FUTURA GENERACION DE COCHES INTELIGENTES

TIN2011-27543-C03-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Topology-based broadcast schemes for urban scenarios targeting adverse density conditions

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Research works regarding vehicular communications usually obviate assessing the proposals in scenarios including adverse vehicle densities, despite such scenarios are quite common in real urban environments. In this paper, we study the effect of these hostile conditions on the performance of different schemes providing warning message dissemination. We then propose the Junction Store and Forward (JSF) and the Nearest Junction Located (NJL) schemes, which were specially designed to be used in very low and very high density scenarios, respectively. Simulation results using real maps demonstrate how our proposed schemes are able to outperform existing warning message dissemination schemes in urban environments under adverse vehicle density conditions., This work was partially supported by the Ministerio de Ciencia e Innovacion´ , Spain, under Grant TIN2011-27543- C03-01, as well as the Government of Arag ´on and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Using evolution strategies to reduce emergency services arrival time in case of accident

  • Barrachina Villalba, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] A critical issue, especially in urban areas, is the occurrence of traffic accidents, since it could generate traffic jams. Additionally, these traffic jams will negatively affect to the rescue process, increasing the emergency services arrival time, which can determine the difference between life or death for injured people involved in the accident. In this paper, we propose four different approaches addressing the traffic congestion problem, comparing them to obtain the best solution. Using V2I communications, we are able to accurately estimate the traffic density in a certain area, which represents a key parameter to perform efficient traffic redirection, thereby reducing the emergency services arrival time, and avoiding traffic jams when an accident occurs. Specifically, we propose two approaches based on the Dijkstra algorithm, and two approaches based on Evolution Strategies. Results indicate that the Density-Based Evolution Strategy system is the best one among all the proposed solutions, since it offers the lowest emergency services travel times., This work was partially supported by the Ministerio de Ciencia e Innovacióm , Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundación Universitaria Antonio Gargallo, the Obra Social de Ibercaja, the Government of Aragon, and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identifying the key factors affecting warning message dissemination in VANET real urban scenarios

  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In recent years, new architectures and technologies have been proposed for Vehicular Ad Hoc networks (VANETs). Due to the cost and complexity of deploying such networks, most of these proposals rely on simulation. However, we find that most of the experiments made to validate these proposals tend to overlook the most important and representative factors. Moreover, the scenarios simulated tend to be very simplistic (highways or Manhattan-based layouts), which could seriously affect the validity of the obtained results. In this paper, we present a statistical analysis based on the 2 k factorial methodology to determine the most representative factors affecting traffic safety applications under real roadmaps. Our purpose is to determine which are the key factors affecting Warning Message Dissemination in order to concentrate research tests on such parameters, thus avoiding unnecessary simulations and reducing the amount of simulation time required. Simulation results show that the key factors affecting warning messages delivery are the density of vehicles and the roadmap used. Based on this statistical analysis, we consider that VANET researchers must evaluate the benefits of their proposals using different vehicle densities and city scenarios, to obtain a broad perspective on the effectiveness of their solution. Finally, since city maps can be quite heterogeneous, we propose a roadmap profile classification to further reduce the number of cities evaluated, This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, and by the Diputacion General de Aragon, under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A V2I-based real-time traffic density estimation system in urban scenarios

  • Barrachina, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
The number of vehicles in our roads is drastically increasing, especially in developing countries. In addition, these vehicles tend to be concentrated in urban areas which present a large population. Since traffic jams have important and mostly negative consequences, such as increasing travel time, fuel consumption, and air pollution, governments are making efforts to alleviate the increasing traffic pressure, being vehicular density one of the main metrics used for assessing the road traffic conditions. However, vehicle density is highly variable in time and space, making it difficult to be estimated accurately. In this paper, we present a solution to estimate the density of vehicles in urban scenarios. Our proposal, that has been specially designed for vehicular networks, allows intelligent transportation systems to continuously estimate vehicular density by accounting for the number of beacons received per road side unit (RSU), and also considering the roadmap topology where the RSUs are located. Using V2I communications, we are able to estimate the traffic density in a certain area, which represents a key parameter to perform efficient traffic redirection, thereby reducing the vehicles’ travel time and avoiding traffic., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, and by the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An adaptive system based on roadmap profiling to enhance warning message dissemination in VANETS

  • Fogué Cortés, Manuel
  • Garrido Picazo, María Piedad
  • Martínez Domínguez, Francisco José
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In recent years, new applications, architectures, and technologies have been proposed for vehicular ad hoc networks (VANETs). Regarding traffic safety applications for VANETs, warning messages have to be quickly and smartly disseminated in order to reduce the required dissemination time and to increase the number of vehicles receiving the traffic warning information. In the past, several approaches have been proposed to improve the alert dissemination process in multihop wireless networks, but none of them were tested in real urban scenarios, adapting its behavior to the propagation features of the scenario. In this paper, we present the Profile-driven Adaptive Warning Dissemination Scheme (PAWDS) designed to improve the warning message dissemination process. With respect to previous proposals, our proposed scheme uses a mapping technique based on adapting the dissemination strategy according to both the characteristics of the street area where the vehicles are moving and the density of vehicles in the target scenario. Our algorithm reported a noticeable improvement in the performance of alert dissemination processes in scenarios based on real city maps., This work was supported in part by the Ministerio de Educacion y Ciencia, Spain, under Grant TIN2011-27543-C03-01 and the Diputacion General de Aragon under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the impact of a novel message dissemination scheme for vehicular networks using real maps

  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In traffic safety applications for vehicular ad hoc networks (VANETs), some warning messages have to be urgently disseminated in order to increase the number of vehicles receiving the traffic warning information. In those cases, redundancy, contention, and packet collisions due to simultaneous forwarding (usually known as the broadcast storm problem) are prone to occur. In the past, several approaches have been proposed to solve the broadcast storm problem in multi-hop wireless networks such as Mobile ad hoc Networks (MANETs). Among them we can find counter-based, distance-based, locationbased, cluster-based, and probabilistic schemes, which have been mainly tested in non-realistic simulation environments. In this paper, we present the enhanced Message Dissemination based on Roadmaps (eMDR), a novel scheme specially designed to increase the percentage of informed vehicles and reduce the notification time; at the same time, it mitigates the broadcast storm problem in real urban scenarios. We evaluate the impact that our scheme has on performance when applied to VANET scenarios based on real city maps, and the results show that it outperforms previous schemes in all situations. 2012 Elsevier Ltd. All rights reserved., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, and by the Diputacion General de Aragon, under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Characterizing the driving style behavior using artificial intelligence techniques

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The On Board Diagnosis (OBD-II) standard allows accessing the vehicles’ Electronic Control Unit (ECU) easily through a Bluetooth OBD-II connector. This paper presents the DrivingStyles architecture, which adopts data mining techniques and neural networks to analyze and generate a classification of driving styles by analysing the characteristics of the driver along the route followed. The final goal is to assist drivers at correcting the bad habits in their driving behavior, while offering helpful tips to improve fuel economy. Since it is well known that smart driving can lead to a lower fuel consumption, the environmental impact is also reduced. A study involving more than 180 users is being carried out, where their real time traces (with different traffic conditions) is sent periodically to the platform. DrivingStyles is currently available on the Google Play Store platform for free download, and has achieved more than 2800 downloads from different countries in just a few months, This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Universitat Politècnica de València through the ABATIS project (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Infrastructureless Approach to Estimate Vehicular Density in Urban Environments

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martinez, Francisco J
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
In Vehicular Networks, communication success usually depends on the density of vehicles, since a higher density allows having shorter and more reliable wireless links. Thus, knowing the density of vehicles in a vehicular communications environment is important, as better opportunities for wireless communication can show up. However, vehicle density is highly variable in time and space. This paper deals with the importance of predicting the density of vehicles in vehicular environments to take decisions for enhancing the dissemination of warning messages between vehicles. We propose a novel mechanism to estimate the vehicular density in urban environments. Our mechanism uses as input parameters the number of beacons received per vehicle, and the topological characteristics of the environment where the vehicles are located. Simulation results indicate that, unlike previous proposals solely based on the number of beacons received, our approach is able to accurately estimate the vehicular density, and therefore it could support more efficient dissemination protocols for vehicular environments, as well as improve previously proposed schemes., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundacion Universitaria Antonio Gargallo (FUAG), and the Caja de Ahorros de la Inmaculada (CAI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RCDP: Raptor-based Content Delivery Protocol for unicast communication in wireless networks for ITS

  • Báguena Albaladejo, Miguel
  • Toh, C. K.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Recent advances in forward error correction (FEC) coding techniques were focused on addressing the challenges of multicast and broadcast delivery. However, FEC approaches can also be used for unicast content delivery in order to solve transmission control protocol issues found in wireless networks. In thispaper, we exploit the error resilient properties of Raptor codes by proposing Raptor-based content delivery protocol (RCDP) ¿ a novel solution for reliable and bidirectional unicast communication in lossy links that can improve content delivery in situations where the wireless network is the bottleneck. RCDP has been designed, validated, optimized, and its performance has been analyzed in terms of throughput and resource efficiency. Experimental results show that RCDP is a highly efficient solution for environments characterized by high delays and packet losses making it very suitable for intelligent transport system oriented applications since it achieves significant performance improvements when compared to traditional transport layer protocols., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01 and by the Ministerio de Educacion, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An algorithm to evaluate routing conditions in smartphones-based wireless networks

  • Soler Fernández, David
  • Albiach Vicent, José
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
  • Manzoni, Pietro|||0000-0003-3753-0403
The increasing penetration of smartphones, i.e., smart devices with multiple sensing and communication interfaces, creates the possibility to build novel types of networks. Opportunistic networking and Content- Based networking strongly rely on the use of such devices. Smartphones tend to have an ON/OFF status that strongly depends on the user activity, mobility pattern and energy saving approach. Wireless adaptors are, after the terminal screen, the strongest source of power consumption. It is therefore common for a node to occasionally turn off the networking device to save energy. The impact on routing of the presence of nodes in the off-state must therefore be thoroughly evaluated. We propose an analyticalmodelbasedon evolving graphs,whichprovides an exhaustive evaluationof routing conditions with the aim to determine the best recurring strategy and parameters when dealing with enddevices that show an ON-OFF behavior. Computational results are given, both on static and dynamic scenarios. 2013 Elsevier Ltd. All rights reserved., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

VEWE: A vehicle ECU wireless Emulation Tool Supporting OBD-II Communication and Geopositioning

  • Alvear, Oscar
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Almost all the vehicles built during the last decade integrate an On Board Diagnostic (OBD-II) interface, through which it is possible to monitor and manage multiple operational parameters. In the past few years, Bluetooth OBD-II devices have been introduced in the market to facilitate connection to mobile devices. With the increased use of these devices, many applications for real-time control and monitoring of different parameters are being developed in the automotive sector. This infrastructure has opened a broad research area related to "smart driving". The main problem in the development and testing of these applications is the need to debug and validate them using different vehicles, under different configurations and scenarios. Our proposal to address this problem is VEWE: Vehicle Wireless Emulator offering realistic vehicle dynamics, which allows testing the correctness and the performance of mobile applications using off-the-shelf computers, thereby speeding up the development time and lowering costs. Another useful functionality of VEWE is the emulation of Geo-positions in Android systems through a GPS-Emulator. By combining both functionalities, VEWE provides a complete and flexible development environment for mobile vehicular applications., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Fast Model for Evaluating the Detection of Selfish Nodes Using a Collaborative Approach in MANETs

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • SERRAT OLMOS, MANUEL DAVID
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Mobilead-hocnetworks(MANETs)relyonnetworkcooperationschemestowork properly. Nevertheless, if nodes have a selfish behaviour and are unwilling to cooperate, the overall network performance could be seriously affected. The use of watchdogs is a well- known mechanism to detect selfish nodes. In this paper we propose a collaborative watchdog approach, which is based on the fast diffusion of selfish nodes awareness. Then, we introduce an analytical model to evaluate the time of detection and the overhead (number of messages) of our collaborative watchdog approach for detecting one selfish node. This model is extended for the case of several selfish nodes, including a mean¿max approximation for a feasible computation when the number of selfish nodes is high. The results show that a collaborative watchdog is a very efficient approach since the detection time of selfish nodes is reduced, and the overall overhead is very low., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain (Grant TIN2011-27543-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CoCoWa: A Collaborative Contact-based Watchdog for Detecting Selfish Nodes

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • SERRAT OLMOS, MANUEL DAVID
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Mobile Ad-hoc Networks (MANETs) assume that mobile nodes voluntary cooperate in order to work properly. This cooperation is a cost-intensive activity and some nodes can refuse to cooperate, leading to a selfish node behaviour. Thus, the overall network performance could be seriously affected. The use of watchdogs is a well-known mechanism to detect selfish nodes. However, the detection process performed by watchdogs can fail, generating false positives and false negatives that can induce to wrong operations. Moreover, relying on local watchdogs alone can lead to poor performance when detecting selfish nodes, in term of precision and speed. This is specially important on networks with sporadic contacts, such as Delay Tolerant Networks (DTNs), where sometimes watchdogs lack of enough time or information to detect the selfish nodes. Thus, we propose CoCoWa (Collaborative Contact-based Watchdog) as a collaborative approach based on the diffusion of local selfish nodes awareness when a contact occurs, so that information about selfish nodes is quickly propagated. As shown in the paper, this collaborative approach reduces the time and increases the precision when detecting selfish nodes., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain (grant TIN2011-27543-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Breaking the Vehicular Wireless Communications Barriers: Vertical Handover Techniques for Heterogeneous Networks

  • Marquez-Barja, Johann M.
  • Ahmadi, Hamed
  • Tornell, Sergio M
  • DaSilva, Luiz A
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
End users increasingly expect ubiquitous connectivity while on the move. With a variety of wireless access technologies available, we expect to always be connected to the technology that best matches our performance goals and price points. Meanwhile, sophisticated onboard units (OBUs) enable geolocation and complex computation in support of handover. In this paper, we present an overview of vertical handover techniques and propose an algorithm empowered by the IEEE 802.21 standard, which considers the particularities of the vehicular networks (VNs), the surrounding context, the application requirements, the user preferences, and the different available wireless networks [i.e., Wireless Fidelity (Wi-Fi), Worldwide Interoperability for Microwave Access (WiMAX), and Universal Mobile Telecommunications System (UMTS)] to improve users' quality of experience (QoE). Our results demonstrate that our approach, under the considered scenario, is able to meet application requirements while ensuring user preferences are also met., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant TIN2011-27543-C03-01 and Grant BES-2012-052673, by Universitat Politecnica de Valencia through the ABATIS Project (PAID-05-12), and by the Science Foundation Ireland under Grant 10/IN.1/I3007 and Grant 10/CE/I1853. The review of this paper was coordinated by Dr. Y. Ji.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

VEACON: A Vehicular Accident Ontology designed to improve safety on the roads

  • Barrachina, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Vehicles are nowadays provided with a variety of new sensors capable of gathering information about themselves and from their surroundings. In a near future, these vehicles will also be capable of sharing all the harvested information, with the surrounding environment and among nearby vehicles over smart wireless links. They will also be able to connect with emergency services in case of accidents. Hence, distributed applications based on Vehicular Networks (VNs) will need to agree on a `common understanding¿ of context for interoperability, and, therefore, it is necessary to create a standard structure which enables data interoperability among all the different entities involved in transportation systems. In this paper, we focus on traffic safety applications; specifically, we present the VEhicular ACcident ONtology (VEACON) designed to improve traffic safety. Our ontology combines the information collected when an accident occurs, and the data available in the General Estimates System (GES) accidents database. We assess the reliability of our proposal using both realistic crash tests, held in the facilities of Applus+ IDIADA in Tarragona, Spain, and Vehicular Network simulations, based on the ns-2 simulation tool. Experimental results highlight that both nearby vehicles and infrastructure elements (RSUs) are correctly notified about an accident in just a few seconds, increasing the emergency services notification effectiveness. (c) 2012 Elsevier Ltd. All rights reserved., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the feasibility of using smartphones for ITS safety applications

  • Tornell, Sergio M.
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Driving security and comfort can be improved by applying Intelligent Transportation Systems (ITS) proposals. The low adoption rate of new ITS hardware and software products is slowing down the market introduction of these solutions. In this paper we present a driving safety application for smartphones based on a warning dissemination protocol called eMDR. The use of smartphones minimizes the hardware cost and eliminates most of the adoption barriers; users will no longer have to install new dedicated devices in their vehicles. Instead, they will simply have to install an application in their smartphone. Our application is integrated with a Navigation System which provides access to road maps, current location, and route information. We analyzed the behavior of the wireless channel and the GPS location service under different conditions to assess the feasibility of our proposal. Results showed that, in C2C communications, smartphones are able to provide a reasonable degree of connectivity, and that the degree of precision achieved is enough for certain types of driving safety applications., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

DTB-MAC: Dynamic Token-Based MAC Protocol for reliable and efficient beacon broadcasting in VANETs

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Most applications developed for vehicular environments rely on broadcasting as the main mechanism to disseminate their messages. However, in IEEE 802.11p, which is the most widely accepted MAC protocol for vehicular communications, all transmissions remain unacknowledged if broadcasting is used. Furthermore, safety message transmission requires a strict delay limit and a high reliability, which is an issue for random access MAC protocols like IEEE 802.11p. Therefore, transmission reliability becomes the most important issue for broadcast-based services in vehicular environments. In this paper, we propose a hybrid MAC protocol, referred as Dynamic Token-Based MAC Protocol (DTB-MAC). DTB-MAC uses both a token passing mechanism and a random access MAC protocol to prevent channel contention as much as possible, and to improve the reliability of safety message transmissions. Our proposed protocol tries to select the best neighbouring node as the next transmitter, and when it is not possible, or when it causes a high overhead, the random access MAC protocol is used instead. Based on simulation experiments, we show that the DTB-MAC protocol can achieve better performance compared with IEEE802.11p in terms of channel utilization and beacon delivery ratio., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic Accident Detection: Assistance Through Communication Technologies and Vehicles

  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The symbiosis between communication technologies and vehicles offer a priceless opportunity to improve assistance to people injured in traffic accidents, providing information about the incident to reduce the response time of emergency services. Determining more accurately the required human and material resources for each particular accident could significantly reduce the number of victims. This paper presents our novel system prototype especially designed to detect and provide faster assistance for traffic accidents, thereby minimizing the consequences on the passengers¿ health. The proposed system requires each vehicle to be endowed with an On-Board Unit responsible for detecting and reporting accident situations to an external Control Unit that estimates its severity, allocating the necessary resources for the rescue operation. The development of our prototype based on off-the-shelf devices, and its validation at the Applus+ IDIADA Automotive Research Corporation facilities, shows that our system could notably reduce the time needed to alert and deploy the emergency services after an accident takes place., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Diputación General de Aragón, under Grant subvenciones destinadas a la formación y contratación de personal investigador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis and evaluation of a raptor-based content delivery protocol and its high-performance extensions

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Forward Error Correction (FEC) has proved to be a very effective solution in the presence of challenging network environments. Its usage is focused mainly on multicast and broadcast delivery, but its impact on research is much wider. For example, FEC can also be used for unicast content delivery to avoid known TCP issues in wireless network environments. In this paper we propose RCDP, a solution that exploits the error resilience properties of Raptor Codes to offer reliable and bidirectional unicast communication in lossy links. Based on an initial approach, different architectural choices are proposed to seek a tradeoff between complexity and efficiency, and offer suitable instances of the protocol for real systems. Experimental results show that RCDP is a highly efficient solution for environments characterized by high delays and packet losses (e.g. ad-hoc networks), achieving significant performance improvements compared to traditional transport-layer protocols., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01 and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An analytical evaluation of a Map-based Sensor-data Delivery Protocol for VANETs

  • Martínez Tornell, Sergio
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The Delay Tolerant Networks (DTN) approach is considered the best strategy to address the specific issues of the VANETs, namely high mobility, variable node density or frequent radio obstacles. Several protocols have been proposed for DTNs, being the epidemic routing (and variations of it) the most representative protocol. Nevertheless, the availability of navigation systems, thanks to which each vehicle is aware of its location within a map, introduces the possibility for a new routing approach, known as Geographic Routing. In this paper we analytically evaluate the performance of our previously presented Map-based Sensor-data Delivery Protocol (MSDP). We introduce an analytical model that takes into account the effect of constrained buffers. The results show that adopting the Map-based Sensor-data Delivery Protocol (MSDP) routing mechanism allows achieving a reasonable delivery time with an insignificant overhead compared with epidemic routing., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing the impact of driving behavior on instantaneous fuel consumption

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Despite the recent technological improvements in vehicles and engines, and the introduction of better fuels, road transportation is still responsible for air pollution in urban areas due to the increasing number of circulating vehicles, and their relative travelled distances. We develop a methodology to calculate, in real-time, the consumption and environmental impact of spark ignition and diesel vehicles from a set of variables such as Engine Fuel Rate, Speed, Mass Air Flow, Absolute Load, and Manifold Absolute Pressure, all of them obtained from the vehicle’s Electronic Control Unit (ECU). Our platform is able to assist drivers in correcting their bad driving habits, while offering helpful recommendations to improve fuel economy. In this paper we will demonstrate through data mining, to what extent does the driving style really affect (negatively or positively) the fuel consumption, as well as the increase or reduction of greenhouse gas emissions generated by vehicles., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Impact of mobility on Message Oriented Middleware (MOM) protocols for collaboration in transportation

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Pérez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Message Oriented Middleware (MOM) refers to the software infrastructure that support ubiquitous information delivery among software and hardware systems. Two of the most relevant protocols in this context are AMQP and MQTT. Lately, they have been extensively used to exchange messages conserving network bandwidth, device memory and batteries. These protocols provide an abstraction of the communication programming details of the different participating system entities, alleviating their coordination and collaboration. However, these protocols have not been thoroughly tested focused on studying the impact of node mobility. In this paper we present an experimental evaluation of both protocols quantifying the effect of the node mobility in terms of message loss, latency, jitter and saturation boundary values. Based on the results obtained, we provide criteria of applicability of these protocols. This evaluation is of interest for the upcoming applications that can be supported by MOM, and in especial for communication in Machine to Machine (M2M) and Internet of Things (IoT)., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A system for automatic notification and severity estimation of automotive accidents

  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
New communication technologies integrated into modern vehicles offer an opportunity for better assistance to people injured in traffic accidents. Recent studies show how communication capabilities should be supported by artificial intelligence systems capable of automating many of the decisions to be taken by emergency services, thereby adapting the rescue resources to the severity of the accident and reducing assistance time. To improve the overall rescue process, a fast and accurate estimation of the severity of the accident represent a key point to help emergency services better estimate the required resources. This paper proposes a novel intelligent system which is able to automatically detect road accidents, notify them through vehicular networks, and estimate their severity based on the concept of data mining and knowledge inference. Our system considers the most relevant variables that can characterize the severity of the accidents (variables such as the vehicle speed, the type of vehicles involved, the impact speed, and the status of the airbag). Results show that a complete Knowledge Discovery in Databases (KDD) process, with an adequate selection of relevant features, allows generating estimation models that can predict the severity of new accidents. We develop a prototype of our system based on off-the-shelf devices and validate it at the Applus+ IDIADA Automotive Research Corporation facilities, showing that our system can notably reduce the time needed to alert and deploy emergency services after an accident takes place., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03- 01, and by the Diputacion General de Aragon, under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

I-VDE: A Novel Approach to Estimate Vehicular Density by Using Vehicular Networks

  • Barrachina Villalba, Javier
  • Garrido Picazo, María Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Road traffic is experiencing a drastic increase in recent years, thereby increasing the every day traffic congestion problems, especially in cities. Vehicle density is one of the main metrics used for assessing the road traffic conditions. Currently, most of the existing vehicle density estimation approaches, such as inductive loop detectors or traffic surveillance cameras, require infrastructure-based traffic information systems to be installed at various locations. In this paper, we present I-VDE, a solution to estimate the density of vehicles that has been specially designed for Vehicular Networks. Our proposal allows Intelligent Transportation Systems to continuously estimate the vehicular density by accounting for the number of beacons received per Road Side Unit, as well as the roadmap topology. Simulation results indicate that our approach accurately estimates the vehicular density, and therefore automatic traffic controlling systems may use it to predict traffic jams and introduce countermeasures., This work was partially supported by the Ministerio de Ciencia e Innovaci´on, Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundaci´on Universitaria Antonio Gargallo (FUAG), and the Caja de Ahorros de la Inmaculada (CAI)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating computation offloading tradeoffs in mobile cloud computing: a sample application

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Mobile cloud computing is generally referred to as the infrastructure where both the data storage and the data processing happen outside of the mobile device. The nature of the connection between the cloud servers and the mobile host are anyway much less reliable than in classical cloud computing with static devices. A compromise must be found between local versus remote computation so to cope with the reduced performance of the data connection and with the characteristics of the mobile device, basically its power availability limitations. In this paper, we evaluate the tradeoffs of computation offloading using as a case study a facial recognition application for smartphones where recognition is a service in the cloud. We present a specifically designed application for mobile devices developed as a component of the proposed evaluation system. The intensive calculus needed for the image manipulation is compared in terms of speed and accuracy both when we delegate it to cloud computing and when we perform it locally on the mobile device. These two alternatives and the intermediate options are compared to determine the optimal settings to take better advantage of integrating these two technologies., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving selfish node detection in MANETs using a collaborative watchdog

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • SERRAT OLMOS, MANUEL DAVID
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Mobile ad-hoc networks (MANETs) are composed of mobile nodes connected by wireless links without using any pre-existent infrastructure. MANET nodes rely on network cooperation schemes to properly work, forwarding traffic unrelated to its own use. However, in the real world, most nodes may have a selfish behavior, being unwilling to forward packets for others in order to save resources. Therefore, detecting these nodes is essential for network performance. Watchdogs are used to detect selfish nodes in computer networks. A way to reduce the detection time and to improve the accuracy of watchdogs is the collaborative approach. This paper proposes a collaborative watchdog based on contact dissemination of the detected selfish nodes. Then, we introduce an analytical model to evaluate the detection time and the cost of this collaborative approach. Numerical results show that our collaborative watchdog can dramatically reduce the overall detection time with a reduced overhead., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain (Grant TIN2011-27543-C03-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An integral model for target tracking based on the use of a WSN

  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Lino, Carlos
  • Díaz Ramírez, Arnoldo
[EN] The use of wireless sensor networks (WSN) in tracking applications is growing at a fast pace. In these applications, the sensor nodes discover, monitor and track an event or target object. A significant number of proposals relating the use of WSNs for target tracking have been published to date. However, they either focus on the tracking algorithm or on the communication protocol, and none of them address the problem integrally. In this paper, a comprehensive proposal for target detection and tracking is discussed. We introduce a tracking algorithm to detect and estimate a target location. Moreover, we introduce a low-overhead routing protocol to be used along with our tracking algorithm. The proposed algorithm has low computational complexity and has been designed considering the use of a mobile sink while generating minimal delay and packet loss. We also discuss the results of the evaluation of the proposed algorithms., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GRCBox: Extending Smartphone Connectivity in Vehicular Networks

  • Martínez Tornell, Sergio
  • PATRA, SUBHADEEP
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The low penetration of connectivity-enabled OBUs is delaying the deployment of Vehicular Networks (VNs), and therefore the development of Vehicular Delay Tolerant Network (VDTN) applications, among others. In this paper we present GRCBox, an architecture based on RaspberryPi that allows integrating smartphones in VNs. GRCBox is based on a low-cost device that combines several pieces of software to provide ad-hoc and multi-interface connectivity to smartphones. Using GRCBox each application can choose the interface for its data flows, which increases flexibility and will allow developers to easily implement applications based on ad-hoc connectivity, such as VDTN applications., This work was partially supported by the Ministerio de Economia y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673, and by the European Commission under Svagata.eu, the Erasmus Mundus Programme, Action 2 (EMA2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Congestion Control for Vehicular Environments by Adjusting IEEE 802.11 Contention Window Size

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Medium access control protocols should manage the highly dynamic nature of Vehicular Ad Hoc Networks (VANETs) and the variety of application requirements. Therefore, achieving a well-designed MAC protocol in VANETs is a challenging issue. The contention window is a critical element for handling medium access collisions in IEEE 802.11, and it highly affects the communications performance. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in urban scenarios show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Validation of a vehicle emulation platform supporting OBD-II communications

  • ALVEAR ALVEAR, ÓSCAR
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
In the next few years, important developments are expected in the Intelligent Transportation Systems (ITS) area. One of the key issues enabling future solutions is achieving an effective integration between mobile apps and vehicles. Such integration can be efficiently achieved on all existing vehicles by relying on the On Board Diagnostic (OBD-II) interface. This allows obtaining critical information such as speed, fuel consumption, gas emissions and system failures. In this paper we propose a vehicle emulation platform, called VEWE, that allows developing and testing OBD-II aware applications. The advantages of this approach include: avoiding the need for a real vehicle, allowing to easily generate realistic vehicle parameter patterns, and supporting emulated GPS functionality. We evaluate our platform by conducting a performance analysis in terms of OBD-II response times and channel capacity when relying on a Bluetooth adapter. We compare our results with respect to those obtained in real vehicles, and demonstrate that our VEWE platform behaves similarly to realistic on board devices, thereby providing a complete and reliable platform for smartphone application development., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

VACaMobil: VANET Car Mobility Manager for OMNeT++

  • Báguena Albaladejo, Miguel
  • Tornell, Sergio M.
  • Torres Cortés, Álvaro
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The performance of communication protocols in vehicular networks highly depends on the mobility pattern. Therefore, one of the most important issues when simulating this kind of protocols is how to properly model vehicular mobility. In this paper we present VACaMobil, a VANET Car Mobility Manager for the OMNeT++ simulator which allows researchers to completely define vehicular mobility by setting the desired average number of vehicles along with its upper and lower bounds. We compare VACaMobil against other common methods employed to generate vehicular mobility. Results clearly show the advantages of the VACaMobil tool when distributing vehicles in a real scenario, becoming one of the best mobility generators to evaluate the performance of different communication protocols and algorithms in VANET environments., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673, and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397, AP2009-2415.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of flooding schemes for real-time video transmission in VANETs

  • Torres Cortés, Álvaro
  • Ji, Yusheng
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Long-distance real-time video flooding over Vehicular Ad-hoc Networks (VANETs) is challenging due to the dynamic nature of vehicular networks. Real-time video transmission has high requirements in terms of bandwidth and delay, while VANETs are characterized by very limited radio resources and high mobility. Our objective is to compare ten different flooding schemes specially designed for this task and select the best in terms of packet arrival ratio and Peak Signal-to-Noise Ratio (PSNR). Additionally, we propose Automatic Copies Distance Based (ACDB), an improved flooding scheme, to cope with variable vehicle density situations. Furthermore, to ensure a good behavior under all types of circumstances, we also study the impact of Global Positioning System (GPS) drift on these schemes. Simulation results show that long-distance real-time video flooding transmission is feasible under certain vehicle density conditions and the quality achieved is enough to allow using such solutions in future applications., This work was partially supported by the Ministerio de Economia y Competitividad, Spain, under Grant TIN2011-27543-C03-01, by the Ministerio de Educacion, Spain, under the FPU program, AP2009-2415, and by the National Institute of Informatics International Internship Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Tool Offering Steady-State Simulations for VANETs

  • Báguena Albaladejo, Miguel
  • Martínez Tornell, Sergio
  • Torres Cortés, Álvaro
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Without realistic vehicle mobility patterns, the evaluation of communication protocols in vehicular networks is compromised. Moreover, in order to ensure repeatability and fairness in vehicular simulations, researchers require simulation tools that allow them to have a complete control of simulations. In this paper we present VACaMobil, a Mobility Manager for the OMNeT++ simulator which offers a way to create complex scenarios with realistic vehicular mobility by allowing to define the desired average number of vehicles, along with its upper and lower bounds, which are maintained throughout the simulation. We compare VACaMobil against other commonly used methods which also generate and manage vehicular mobility. Results expose some flaws of those basic tools, and shows that VACaMobil behaves significantly better. The harmful impact on communication protocols when using common tools is also quantified, revealing VACaMobil as a necessity for current research., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grants TIN2011-27543- C03-01 and BES-2012-052673, by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397, AP2009-2415, and by the Universitat Politècnica de València under project ABATIS (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Assessing the effectiveness of DTN techniques under realistic urban environments

  • Tornell, Sergio M.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Intelligent Transportation Systems (ITS) require collecting and distributing as much relevant information as possible to provide their services. Such information could also offer new possibilities to various service providers in the wider Smart City context. The distribution of this intelligence is carried out through various vehicular networking strategies, the most flexible of all being Delay Tolerant Networking (DTN). DTN protocols can cope with the problems derived from high mobility and the possibility of high node sparsity. Nevertheless, achieving a fair comparison of DTN solutions in an urban environment is a hard task. In this paper we present a generic DTN model that we use to compare various representative DTN solutions in a metropolitan scenario. We highlight the weak and strong points of each evaluated proposal by also taking into consideration different sending strategies adopted to improve the performance of DTN protocols., This work was partially supported by the Ministerio de Econom´ıa y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673 and by the Universitat Politecnica de Val ` encia through the ABATIS project (PAID- `05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reducing Channel Contention in Vehicular Environments Through an Adaptive Contention Window Solution

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Intelligent Transportation Systems (ITS) are attracting growing attention both in industry and academia due to the advances in wireless communication technologies, and a significant demand for a wide variety of applications targeting this kind of environments are expected. In order to make it usable in real vehicular environments, achieving a well-designed Medium Access Control (MAC) protocol is a challenging issue due to the dynamic nature of Vehicular Ad Hoc Networks (VANETs), scalability issues, and the variety of application requirements. Different standardization organizations have selected IEEE 802.11 as the first choice for VANET environments considering its availability, maturity, and cost. The contention window is a critical parameter for handling medium access collisions by the IEEE 802.11 MAC protocol, and it highly affects the communications performance. The impact of adjusting the contention window has been studied in Mobile Ad-Hoc Networks (MANETs), but the vehicular communications community has not yet addressed this issue thoroughly. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in a highway scenario show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities., This work was partially supported by the Ministerio de Ciencia e Innovacióm , Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

TGRP: Topological-Geographical Adaptive Routing Protocol for Vehicular Environments

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Vehicular networks represent an extremely variable and unpredictable environment. Scenarios can vary from very dense and congested configurations to sparsely populated arrangements. Therefore, protocols designed for such a general scope may fail to efficiently behave in certain configurations. In this paper we propose the Topological-Geographical Routing Protocol (TGRP), a novel solution that presents an adaptive behavior by using a set of standard routing strategies. According to the scenario, TGRP chooses among four different routing approaches — two-hop direct delivery, Dynamic MANET On-demand (DYMO), greedy georouting, and store-carry-andforward technique— to dynamically adapt its behavior to every situation. Performance evaluation shows that TGRP presents a more stable performance under different circumstances, being more adaptable to the changing characteristics of vehicular networks. In fact, TGRP outperforms DYMO by 10% in low density scenarios. In dense networks, TGRP also outperforms the Delay Tolerant Network (DTN) protocol by 10%., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01 and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Representative and Accurate Characterization of Inter-contact Times in Mobile Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
A representative characterisation of inter-contact times between nodes is essential for the performance evaluation of mobile networks. The most common characterization of inter-contact times is based on the study of the aggregate distribution of contacts between individual pairs of nodes. The problem with this aggregate distribution is that it is not always representative of the individual pair distributions, especially in the short term and when the number of nodes in the network is high. Thus, deriving results from this characterisation, can lead to inaccurate performance evaluations results. In this paper, we propose and evaluate two new methods for characterising the inter-contact times distribution in mobile networks. We prove that these characterizations have a higher representativeness, thereby improving the accuracy of the derived performance results. For evaluating the precision of the different characterizations we use the epidemic routing protocol, which has an analytical performance expression that is based on a contact rate λ. We derive from each of the characterizations the corresponding λ values. Then, we compare the results obtained using the analytical expression with simulation results using both synthetic and real contact traces. It is shown that the new characterization methods are very accurate, even for reduced contact traces and high number of nodes., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing Vehicular Density Estimation Using Vehicle-to-Infrastructure Communications

  • Barrachina Villalba, Javier
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Vehicle density is one of the main metrics used for assessing the road traffic conditions. In this paper, we present a solution to estimate the density of vehicles that has been specially designed for Vehicular Networks. Our proposal allows Intelligent Transportation Systems to continuously estimate the vehicular density by accounting for the number of beacons received per Road Side Unit, as well as the roadmap topology. Simulation results indicate that our approach accurately estimates the vehicular density, and therefore automatic traffic controlling systems may use it to predict traffic jams and introduce countermeasures. Index Terms—Vehicular Networks, vehicular density estimation, Road Side Unit, VANETs., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

V2X solutions for real-time video collection

  • Torres Cortés, Álvaro
  • Ji, Yusheng
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Quickly identifying the severity of highway acci-dents, as well as the resources required to assist the people involved in those accidents, is a basic requirement for future intelligent transportation systems. In this context, vehicular communication technologies currently being standardized are able to provide novel solutions to address this problem. In this work we study the feasibility of combining vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications to deliver a video stream from the place of the accident to the traffic authorities. Our approach relies on vehicles as data relays, thus having the additional advantage of providing drivers with a clear view about the accident, thereby helping to reduce stress and improving traffic flow. An experimental analysis comparing different traffic flooding mechanisms for wireless networks show that the proposed system is viable for highways with moderate/high amounts of traffic, although highlighting the need for more efficient mechanisms specifically addressing broadcast propagation in highway envi-ronments., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grant TIN2011- 27543-C03-01, by the Ministerio de Educación, Spain, under the FPU program, AP2009-2415, and by the National Institute of Informatics International Internship Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Seamless MANET autoconfiguration through enhanced 802.11 beaconing

  • Villanueva del Pozo, María José
  • Torres Cortés, Álvaro
  • Cano Reyes, José
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The deployment of mobile ad-hoc networks involves several configuration steps, which complicate research efforts and hinder user interest. This problem prompts for new approaches offering full autoconfiguration of terminals at the different network layers involved. In this paper we propose a novel solution for the autoconfiguration of IEEE 802.11 based MANETs that relies on SSID parameter embedding. Our solution allows users to join an existing MANET without resorting to any additional technology, and even in the presence of encrypted communications. Experimental testbed results using a real implementation of the proposed solution show that it introduces significant improvements compared to other existing solutions, allowing nearby stations to be configured in about two seconds, and also enabling multi-hop dissemination of configuration data to take place quickly and efficiently., This work was partially supported by the Ministerio de Educacion y Ciencia, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A comparative evaluation of AMQP and MQTT protocols over unstable and mobile networks

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Pérez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Message oriented middleware (MOM) refers to the software infrastructure supporting sending and receiving messages between distributed systems. AMQP and MQTT are the two most relevant protocols in this context. They are extensively used for exchanging messages since they provide an abstraction of the different participating system entities, alleviating their coordination and simplifying the communication programming details. These protocols, however, have not been thoroughly tested in the context of mobile or dynamic networks like vehicular networks. In this paper we present an experimental evaluation of both protocols in such scenarios, characterizing their behavior in terms of message loss, latency, jitter and saturation boundary values. Based on the results obtained, we provide criteria of applicability of these protocols, and we assess their performance and viability. This evaluation is of interest for the upcoming applications of MOM, especially to systems related to the Internet of Things., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UbiqBIOPARC: A Wireless and Sensor Based Context-Aware System for an Enhanced Guide Experience

  • Sorribes Díaz, José Vicente
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This work discusses and evaluates the use of wireless and multi-sensor based technologies to develop UbiqBIOPARC, a new generation zoological park that has been created based on the zoo-immersion concept. It offers appropriate contextual information to zoo visitors, depending on their preferences and the environment in which they are positioned. It combines the flexibility of the iPhone SDK, the connectivity provided by 3G technologies, the location capabilities of GPS, and the orientation offered by a digital compass integrated in the device. In this document the overall architecture and the implementation steps followed to create this context-aware application are presented. We compare our system with respect to previous ones and demonstrate that UbiqBIOPARC is an example of how innovative context-aware applications can be built with the aid of GPS and compass features. Several real experiments have been carried out in order to evaluate performance and system behavior, and numerical results demonstrate the practicality offered by our application, while providing a quite reasonable performance in terms of delay, usability, and energy efficiency., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543- C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the Selection of Optimal Broadcast Schemes in VANETs

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
In Vehicular ad hoc Networks (VANETs), efficient dissemination of messages is a key factor to speed up the development of useful services and applications. In this paper, we propose a novel algorithm that automatically chooses the best dissemination scheme trying to fit the warning message delivery policy to the current characteristics of each specific vehicular scenario. Our mechanism uses as input parameters the vehicular density and the topological characteristics of the environment where the vehicles are located, in order to decide which dissemination scheme to use. Simulation results demonstrate the feasibility of our approach, which is able to support more efficient warning message dissemination in vehicular environments., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, by the Fundación Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as the Government of Aragón and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing the Impact of Obstacle Modeling Accuracy on IEEE 802.11p Based Message Dissemination

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Deploying real IEEE 802.11p vehicular network testbeds is a challenging but difficult option for most researchers. In these cases, the research community relies on simulation tools to test their protocols. However, since simulation accuracy is a critical issue, real testbed results should be used as a reference to improve simulation behavior. Our proposal adjusts common propagation models to mimic samples taken from real environments, and it uses a building aware model to achieve as much accuracy as possible in urban scenarios. We evaluate the performance differences obtained with this model against other usual simulation schemes, like line-ofsight propagation models, models where no building blockage is taken into account, and models where propagation is only allowed along streets, achieving differences of up to 70% in some measurements. Going a step further, the model is used to study the radio propagation behavior along different city layouts, showing that the actual building layout is one of the key factors affecting protocol performance in urban environments., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

V2X-d: a Vehicular Density Estimation System that combines V2V and V2I Communications

  • Barrachina Villalba, Javier
  • Sangüesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Road traffic is experiencing a drastic increase, and vehicular traffic congestion is becoming a major problem, especially in metropolitan environments throughout the world. Additionally, in modern Intelligent Transportation Systems (ITS) communications, the high amount of information that can be generated and processed by vehicles will significantly increase message redundancy, channel contention, and message collisions, thus reducing the efficiency of message dissemination processes. In this work, we present a V2X architecture to estimate traffic density on the road that relies on the advantages of combining V2V and V2I communications. Our proposal uses both the number of beacons received per vehicle (V2V) and per RSU (V2I), as well as the roadmap topology features to estimate the vehicle density. By using our approach, modern Intelligent Transportation Systems will be able to reduce traffic congestion and also to adopt more efficient message dissemination protocols., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, by the Fundación Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as the Government of Aragón and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Road side unit deployment: a density-based approach

  • Barrachina, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Franciso J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Currently, the number of vehicles increases every year, raising the probability of having accidents. When an accident occurs, wireless technologies enable vehicles to share warning messages with other vehicles by using vehicle to vehicle (V2V) communications, and with the emergency services by using vehicle to infrastructure (V2I) communications. Regarding vehicle to infrastructure communications, Road Side Units (RSUs) act similarly to wireless LAN access points, and can provide communications with the infrastructure. Since RSUs are usually very expensive to install, authorities limit their number, especially in suburbs and areas of sparse population, making RSUs a precious resource in vehicular environments. In this paper, we propose a Density-based Road Side Unit deployment policy (D-RSU), specially designed to obtain an efficient system with the lowest possible cost to alert emergency services in case of an accident. Our approach is based on deploying RSUs using an inverse proportion to the expected density of vehicles. The obtained results show how D-RSU is able to reduce the required number of RSUs, as well as the accident notification time., This work was partially supported by the Ministerio de Educacion y Ciencia, Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundacion Universitaria Antonio Gargallo (FUAG), and the Caja de Ahorros de la Inmaculada (CAI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Securing Warning Message Dissemination in VANETs using Cooperative Neighbor Position Verification

  • Fogue, Manuel
  • Martinez, Francisco J.
  • Garrido, Piedad
  • Fiore, Marco
  • Chiasserini, Carla-Fabiana
  • Casetti, Claudio
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Efficient schemes for warning message dissemination in vehicular ad hoc networks (VANETs) use context information collected by vehicles about their neighbor nodes to guide the dissemination process. Based on this information, vehicles autonomously decide whether they are the most appropriate forwarding nodes. These schemes maximize their performance when all the vehicles advertise correct information about their positions, but position errors may drastically reduce the performance of the dissemination process. We present a proactive cooperative neighbor position verification protocol that detects nodes advertising false locations and selects optimal forwarders to mitigate the impact of adversarial users. We combine our mechanism with two warning dissemination schemes for VANETs and demonstrate how the latter can benefit from the use of our security scheme in the presence of malicious nodes trying to exploit known system vulnerabilities., Manuscript received July 30, 2013; revised May 28, 2014; accepted July 4, 2014. Date of publication July 30, 2014; date of current version June 16, 2015. This work was supported in part by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, by the Fundacion Universitaria Antonio Gargallo and the Obra Social de Ibercaja under Grant 2013/B010, by the Government of Aragon under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador," and by the European Social Fund (T91 Research Group). The review of this paper was coordinated by Prof. Y. Qian.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using topology and neighbor information to overcome adverse vehicle density conditions

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martinez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
Vehicular networks supporting cooperative driving on the road have attracted much attention due to the plethora of new possibilities they offer to modern Intelligent Transportation Systems. However, research works regarding vehicular networks usually obviate assessing their proposals in scenarios including adverse vehicle densities, i.e., density values that significantly differ from the average values, despite such densities can be quite common in real urban environments (e.g. traffic jams). In this paper, we study the effect of these hostile conditions on the performance of different schemes providing warning message dissemination. The goal of these schemes is to maximize message delivery effectiveness, something difficult to achieve in adverse density scenarios. In addition, we propose the Neighbor Store and Forward (NSF) scheme, designed to be used under low density conditions, and the Nearest Junction Located (NJL) scheme, specially developed for high density conditions. Simulation results demonstrate that our proposals are able to outperform existing warning message dissemination schemes in urban environments under adverse vehicle density conditions. In particular, NSF reduces the warning notification time in low vehicle density scenarios, while increasing up to 23.3% the percentage of informed vehicles. As for high vehicle density conditions, NJL is able to inform the same percentage of vehicles than other existing approaches, while reducing the number of messages up to 46.73%, This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, by the Fundacion Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Evaluating H.265 real-time video flooding quality in highway V2V environments

  • Torres Cortés, Álvaro
  • Piñol, Pablo
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Video transmission over VANETs is an extremely difficult task not only due to the high bandwidth requirements, but also due to typical VANET characteristics such as signal attenuation, packet losses, high relative speeds and fast topology changes. In future scenarios, vehicles will provide other vehicles with information about accidents or congestion on the road, and in these cases offering visual information can be a really valuable resource for both drivers and traffic authorities. Hence, achieving an efficient transmission is critical to maximize the user-perceived quality. In this paper we evaluate solutions that combine different flooding techniques, and different video codecs to assess the effectiveness of long-distance real-time video streaming. In particular, we will compare the most effective video coding standard available (H.264) with the upcoming H.265 codec in terms of both frame loss and PSNR., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grant TIN2011- 27543-C03-01, and by the Ministerio de Educación, Spain, under the FPU program, AP2009-2415.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel approach for traffic accidents sanitary resource allocation based on multi-objective genetic algorithms

  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The development of communication technologies integrated in vehicles allows creating new protocols and applications to improve assistance in traffic accidents. Combining this technology with intelligent systems will permit to automate most of the decisions needed to generate the appropriate sanitary resource sets, thereby reducing the time from the occurrence of the accident to the stabilization and hospitalization of the injured passengers. However, generating the optimal allocation of sanitary resources is not an easy task, since there are several objectives that are mutually exclusive, such as assistance improvement, cost reduction, and balanced resource usage. In this paper, we propose a novel approach for the sanitary resources allocation in traffic accidents. Our approach is based on the use of multiobjective genetic algorithms, and it is able to generate a list of optimal solutions accounting for the most representative factors. The inputs to our model are: (i) the accident notification, which is obtained through vehicular communication systems, and (ii) the severity estimation for the accident, achieved through data mining. We evaluate our approach under a set of vehicular scenarios, and the results show that a memetic version of the NSGA-II algorithm was the most effective method at locating the optimal resource set, while maintaining enough variability in the solutions to allow applying different resource allocation policies. 2012 Elsevier Ltd. All rights reserved., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, and by the Diputacion General de Aragon, under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Power consumption evaluation in vehicular opportunistic networks

  • Herrera-Tapia, Jorge
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
The duration of batteries is a key factor that must be considered in the design and deployment of applications and services on mobile devices. The users of this technology are not aware of the energetic impact of the applications executing in their devices, especially if these applications present an adaptive behavior. The goal of this paper is to study the power consumption associated to an opportunistic communication application. This will be achieved by analyzing the different operation stages of an application running on mobile and vehicular devices, using basic statistical analysis calculations on data collected by a logging application. Furthermore, this will allow analysing the impact of this kind of applications regarding battery performance, providing useful information to users and developers. The experiments were executed in an opportunistic network environment, using a floating content approach as a mechanism for information distribution in a geographically delimited zone., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01 and by the Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación del Ecuador (SENESCY T).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reducing emergence services arrival time by using vehicular communications and Evolution Strategies

  • Barrachina, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Nowadays, traffic jams in urban areas have become a problem that keeps growing every year since the number of vehicles in our cities is continuously increasing. One of the most common causes producing traffic jams are vehicle accidents. Moreover, the arrival time of the emergency services could be raised due to traffic congestion. Intelligent Transportation Systems (ITS) have a key role in order to reduce or mitigate this problem. In this paper, we propose four different approaches addressing the traffic congestion problem, comparing them to obtain the best solution. Using V2I communications, we are able to accurately estimate the traffic density in a certain area, which represents a key parameter to perform efficient traffic redirection, thereby reducing the emergency services arrival time, and avoiding traffic jams when an accident occurs. Specifically, we propose two approaches based on the Dijkstra algorithm, and two approaches based on Evolution Strategies. Notice that, when an accident occurs, time is a critical issue, and the strategies here proposed contribute to find the optimal solution within a short time period., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundacion Universitaria Antonio Gargallo, the Obra Social de Ibercaja, under Grant 2013/B010, and by the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RTAD: A real-time adaptive dissemination system for VANETs

  • Sanguesa, Julio A
  • Fogue, Manuel
  • Garrido, Piedad
  • Martinez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Efficient message dissemination is of utmost importance to propel the development of useful services and applications in Vehicular ad hoc Networks (VANETs). In this paper, we propose a novel adaptive system that allows each vehicle to automatically adopt the most suitable dissemination scheme in order to fit the warning message delivery policy to each specific situation. Our mechanism uses as input parameters the vehicular density and the topological characteristics of the environment where the vehicles are located, in order to decide which dissemination scheme to use. We compare our proposal with respect to two static dissemination schemes (eMDR and NJL), and three adaptive dissemination systems (UV-CAST, FDPD, and DV-CAST). Simulation results demonstrate that our approach significantly improves upon these solutions, being able to support more efficient warning message dissemination in all situations ranging from low densities with complex maps, to high densities in simple scenarios. In particular, RTAD improves existing approaches in terms of percentage of vehicles informed, while significantly reducing the number of messages sent, thus mitigating broadcast storms. 2015 Elsevier B.V. All rights reserved., This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under Grant TIN2011-27543-C03-01, as well as the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highlights: IEEE ITS Society Technical Committee on Mobile Communications Networks for ITS

  • Toh, Chai Keong
  • Higashino, Teuro
  • Weigle, Michele C.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] The TC on 'Mobile Networks for ITS' has been in existence since 2005. It will continue to initiate activities (through journal and magazine special issues, workshops, conferences, forums, etc.,) and to promote the technical interactions among professionals in the field. The success of the TC will depend on the contributions of its members and organizers. We would like to thank Prof. Urbano Nunes (VP Technical Activities) for inviting us to submit this highlight. We would also like to thank all the TC members who have supported us over the years. We look forward to your continual participation in the future., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

On the use of a cooperative neighbor position verification scheme to secure warning message dissemination in VANETs

  • Fogue, Manuel
  • Martínez, Francisco J.
  • Garrido, Piedad
  • Fiore, Marco
  • Chiasserini, Carla-Fabiana
  • Casetti, Claudio
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Efficient schemes for warning message dissemination in vehicular ad hoc networks (VANETs) use context information collected by vehicles about their neighbor nodes to guide the dissemination process. These schemes maximize their performance when all the vehicles advertise correct information about their positions, and hence position errors may drastically reduce the performance of the dissemination process. We present a proactive Cooperative Neighbor Position and Verification (CNPV) protocol that detects nodes advertising false locations so as to mitigate the impact of adversarial users. We combine our mechanism with two warning dissemination schemes for VANETs, and demonstrate how these algorithms can benefit from the use of our security scheme in the presence of malicious nodes trying to exploit the inherent vulnerabilities of each algorithm., This work was partially supported by the Ministerio de Ciencia e Innovacion´ , Spain, under Grant TIN2011-27543-C03-01, by the Fundaci´on Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as by the Diputacion General de Arag ´ on´ and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computer simulations of VANETs using realistic city topologies

  • Martínez, Francisco J.
  • Fogue, Manuel
  • Toh, C.K.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Researchers in vehicular ad hoc networks (VANETs) commonly use simulation to test new algorithms and techniques. This is the case because of the high cost and labor involved in deploying and testing vehicles in real outdoor scenarios. However, when determining the factors that should be taken into account in these simulations, some factors such as realistic road topologies and presence of obstacles are rarely addressed. In this paper, we first evaluate the packet error rate (PER) through actual measurements in an outdoor road scenario, and deduce a close model of the PER for VANETs. Secondly, we introduce a topology-based visibility scheme such that road dimension and geometry can be accounted for, in addition to line-of-sight. We then combine these factors to determine when warning messages (i.e., messages that warn drivers of danger and hazards) are successfully received in a VANET. Through extensive simulations using different road topologies, city maps, and visibility schemes, we show these factors can impact warning message dissemination time and packet delivery rate., This work was partially supported by the Ministerio de Educacion y Ciencia, Spain, under Grant TIN2011-27543-C03-01, and by the Diputacion General de Aragon, under Grant "subvenciones destinadas a la formacion y contratacion de personal investigador".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Rumours and Good Practices in Community Networks Wireless Links

  • Perez -Francisco, Miguel
  • Boronat-Perez, Pablo
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
In wireless community networks, backbone pointto-point links concentrate most of the traffic. Thus, these links are crucial for the overall performance of the network. Network managers have to constantly test and maintain these links to optimise their performance, but their decisions are often based upon rumours or a purely theoretical knowledge of the technologies being used. These sources of information can be very biased and can lead to incorrect decisions in such complex systems. In this work we provide the guidelines to help in wireless links optimization by covering the most common mistakes or questions, and by addressing the critical factors one by one using a real scenario. In our experiments we analyse critical characteristics such as the interference among links, the relation between channel bandwidth and throughput, the impact of output power, and the effect of antenna proximity., This work has been supported by project P1·1A2010-13 from the Universitat Jaume I, the project TIN2011-27543-C03-01 from “Ministerio de Ciencia e Innovación de España” and also by the ERDF of the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A reliable token-based MAC protocol for delay sensitive platooning applications

  • Balador, Ali
  • Böhm, Annette
  • Uhlemann, Elisabeth
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
Platooning is both a challenging and rewarding application. Challenging since strict timing and reliability requirements are imposed by the distributed control system required to operate the platoon. Rewarding since considerable fuel reductions are possible. As platooning takes place in a vehicular ad hoc network, the use of IEEE 802.11p is close to mandatory. However, the 802.11p medium access method suffers from packet collisions and random delays. Most ongoing research suggests using TDMA on top of 802.11p as a potential remedy. However, TDMA requires synchronization and is not very flexible if the beacon frequency needs to be updated, the number of platoon member changes or if retransmissions for increased reliability are required. We therefore suggest a token-passing medium access method where the next token holder is selected based on beacon data age. This has the advantage of allowing beacons to be re-broadcasted in each beacon interval whenever time and bandwidth is available. We show that our token-based method is able to reduce the data age and increase reliability considerably compared to pure 802.11p., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543- C03-01. Balador is funded by ERASMUS+ programme, and Böhm and Uhlemann are also funded by the Knowledge Foundation through the ACDC project
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel approach for the fast detection of black holes in mobile ad hoc networks

  • SERRAT OLMOS, MANUEL DAVID
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Mobile ad hoc networks are infrastructure-less wireless networks that rely on node cooperation to properly work. In this kind of networks, attack detection and reaction is a key issue to the whole network. The most common threat in mobile ad hoc network scenarios consists in the presence of a certain percentage of selfish nodes, which try to reduce the consumption of their own resources to prolong their battery lifetime. Those nodes do not collaborate on forwarding activities, therefore affecting the overall network performance. Watchdogs are well-known mechanisms to detect threats and attacks from misbehaved and selfish nodes in computer networks. The problem behind the use of watchdogs is that while they can be quite effective in detecting selfishness by using their traffic overhearing behaviour, they can also cause a relatively high level of false negatives, thereby reducing their accuracy. This article proposes a collaborative approach for detecting selfish nodes in mobile ad hoc networks. It is based on using a set of collaborative watchdogs, which collaborate to enhance their individual and collective performance. By using both an analytical study and simulation, we demonstrate that our approach is able to improve accuracy and detection speed, while reducing the impact of false-negative events, This work was partially supported by the Ministerio de Ciencia e Innovacion, Spain, under grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DTN Protocols for Vehicular Networks: An Application Oriented Overview

  • Tornell, Sergio M.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
This survey provides an in-depth analysis of the different proposals for Vehicular Delay Tolerant Networks (VDTNs). We introduce the DTN architecture and classify VDTN proposals according to the type of knowledge needed to route messages. This classification also includes some Delay Tolerant Network (DTN) protocols originally designed for Opportunistic Networks to illustrate the evolution from Opportunistic DTN protocols to VDTN protocols. We also identify a set of common mechanisms that can be applied to almost all the VDTN protocols, heavily influencing their performance. Finally, we present some applications where VDTNs can be applicable and evaluate the suitability of the different proposals for each specific application. Moreover, this survey is not only limited to describing the different protocols but also focuses on the reproducibility and repeatability of experiments. With this in mind, we also review the evaluation methods used by VDTN researchers. We identify a lack of realism in most of the simulation models used by the VDTN research community, providing certain guidelines to address this issue., This work was supported in part by the Ministerio de Economia y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Identifying the key factors affecting warning message dissemination in vanet real urban scenarios

  • Fogue, M.
  • Garrido, P.
  • Martinez, F.J.
  • Cano, J.C
  • Calafate, C.T.
  • Manzoni, P.
In recent years, new architectures and technologies have been proposed for Vehicular Ad Hoc networks (VANETs). Due to the cost and complexity of deploying such networks, most of these proposals rely on simulation. However, we find that most of the experiments made to validate these proposals tend to overlook the most important and representative factors. Moreover, the scenarios simulated tend to be very simplistic (highways or Manhattan-based layouts), which could seriously affect the validity of the obtained results. In this paper, we present a statistical analysis based on the 2k factorial methodology to determine the most representative factors affecting traffic safety applications under real roadmaps. Our purpose is to determine which are the key factors affecting Warning Message Dissemination in order to concentrate research tests on such parameters, thus avoiding unnecessary simulations and reducing the amount of simulation time required. Simulation results show that the key factors affecting warning messages delivery are the density of vehicles and the roadmap used. Based on this statistical analysis, we consider that VANET researchers must evaluate the benefits of their proposals using different vehicle densities and city scenarios, to obtain a broad perspective on the effectiveness of their solution. Finally, since city maps can be quite heterogeneous, we propose a roadmap profile classification to further reduce the number of cities evaluated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An infrastructureless approach to estimate vehicular density in urban environments

  • Sanguesa, J.A.
  • Fogue, M.
  • Garrido, P.
  • Martinez, F.J.
  • Cano, J.C
  • Calafate, C.T.
  • Manzoni, P.
In Vehicular Networks, communication success usually depends on the density of vehicles, since a higher density allows having shorter and more reliable wireless links. Thus, knowing the density of vehicles in a vehicular communications environment is important, as better opportunities for wireless communication can show up. However, vehicle density is highly variable in time and space. This paper deals with the importance of predicting the density of vehicles in vehicular environments to take decisions for enhancing the dissemination of warning messages between vehicles. We propose a novel mechanism to estimate the vehicular density in urban environments. Our mechanism uses as input parameters the number of beacons received per vehicle, and the topological characteristics of the environment where the vehicles are located. Simulation results indicate that, unlike previous proposals solely based on the number of beacons received, our approach is able to accurately estimate the vehicular density, and therefore it could support more efficient dissemination protocols for vehicular environments, as well as improve previously proposed schemes.