Pasar al contenido principal

CONTROL DE LA FORMACION DE CONTAMINANTES ORGANICOS HALOGENADOS EN EL TRATAMIENTO TERMICO DE RESIDUOS POR MEDIO DE PRETRATAMIENTOS E INHIBICION

BES-2017-080382

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving efficiency and feasibility of subcritical water debromination of printed circuit boards E-waste via potassium carbonate adding

  • Gandon-Ros, Gerard
  • Soler, Aurora
  • Aracil, Ignacio
  • Gómez-Rico, María Francisca
  • Conesa, Juan A.
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Gómez-Rico, María Francisca|||/items/858ecde1-f676-4a71-982c-77a0fbb2c21c
Waste printed circuit boards (WCBs) were debrominated under hydrothermal treatment, using potassium carbonate as an alkaline additive to improve debromination efficiency (DE). Two different high-pressure reactors were used: a 1-L stirred reactor, where the evolution of the DE was followed over time at a low CO32−/Br− ratio (1:25), and an elementary 0.1-L non-stirred reactor, used to find the optimal parameters and to simplify the hydrothermal debromination (HTD) process. Considering both reactors, experiments were conducted changing the temperature (200 °C, 225 °C, 250 °C, 275 °C), and also the CO32−/Br− anionic ratio (1:50, 1:25, 1:10, 1:5, 1:2.5, 1:1, 2:1, 4:1) and the solid/liquid ratio (1:10, 1:5, 1:2) in the case of the 0.1-L reactor. No metallic catalyst was required. A maximum DE of about 98.9 wt % was reached in the agitated vessel at 275 °C after 4 h, with an additive/bromine ratio of 1:25. Similar DE (99.6 wt %) was also achieved in the non-stirred reactor at only 225 °C and after 2 h, using an additive/bromine ratio of 4:1 and a solid/liquid ratio of only 1:2. Concerning the solid phase behaviour during debromination, only 5 % of the net calorific value (NCV) was lost after a complete HTD treatment of WCB.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mechanochemical debromination of waste printed circuit boards with marble sludge in a planetary ball milling process

  • Gandon-Ros, Gerard
  • Aracil, Ignacio
  • Gómez-Rico, María Francisca
  • Conesa, Juan A.
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Gómez-Rico, María Francisca|||/items/858ecde1-f676-4a71-982c-77a0fbb2c21c
An effective management of waste printed circuit board (WCB) recycling presents significant advantages of an economic, social, and environmental nature. This is particularly the case when a suitable valorisation is made of the non-metallic parts of the WCBs, well known for their “hidden” toxicological risks. Such benefits motivate research on techniques that could contribute to mitigating their adverse socio-environmental impacts. In this work, waste printed circuit boards (WCBs) containing tetrabromobisphenol A (TBBPA) as a brominated flame retardant (BFR) underwent debromination using a mechanochemical treatment (MCT) and marble sludge, another recoverable waste, as well as pure CaO as additives. All runs in this work were performed at an intermediate rotation speed of 450 rpm, using additive/WCB mass ratios (Rm) of 4:1 and 8:1, ball to powder ratios (BPR) of 20:1 and 50:1, treatment times from 2.5 h to 10 h, two WCB sizes (powder and 0.84 mm) and marble sludge, from original to precalcined conditioning. Stainless steel jars and balls were used to verify the effect of each parameter on the system and to seek an optimum process. Complete debromination of 0.84 mm WCBs was achieved at 450 rpm, using a Rm of 8:1, a BPR of 50:1, a residence time of 10 h (more than 95% in only 5 h), and a precalcined marble sludge as additive. The results revealed that when using a Rm of 4:1 instead of 8:1, more waste could be effectively treated, per batch with a lesser need for additives, at the expense of a slightly lower level of debromination efficiency. In the same way, an appropriate apparent ball diameter (with respect to the volume of the used jar) should be carefully studied in relation to WCB size in order to achieve a beneficial total amount of energy transfer during milling.