Pasar al contenido principal

TRATAMIENTO TERMICO DE RESIDUOS VOLUMINOSOS Y ELECTRONICOS: CARACTERIZACION Y FORMACION/DESTRUCCION DE DIOXINAS, PCBS Y OTROS CONTAMINANTES

CTQ2013-41006-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Physical and chemical evaluation of furniture waste briquettes

  • Moreno Caballero, Ana Isabel
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Emissions from pyrolysis and combustion of automotive shredder residue

  • Rey Martínez, Lorena
  • Conesa, Juan A.
  • Aracil, Ignacio
  • Garrido, María A.
  • Ortuño García, Nuria
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
The present work has been carried out to verify the feasibility of thermal valorization of an automobile shredder residue (ASR). With this aim, the thermal decomposition of this waste has been studied in a laboratory scale reactor in order to analyze the pollutants emitted under different operating conditions. The emission factors of carbon oxides, light hydrocarbons, PAHs, PCPhs, PCBzs, PBPhs, PCDD/Fs, dioxin-like PCBs and PBDD/Fs were determined at two temperatures, 600 and 850ºC, and under varying oxygen ratios ranging from 0 (pure pyrolysis) to 1.5 (over-stoichiometric oxidation). After analyzing all these compounds we conclude that thermal valorization of ASR may be an efficient way to achieve the targets established in the Directive 2000/53/EC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Volatile and semivolatile compounds from the pyrolysis and combustion of viscoelastic memory foam

  • Garrido, María A.
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Viscoelastic memory foam (VMF) is a polyurethane-based foam with additional chemicals to obtain a material showing both viscous and elastic behavior at the same time. This type of foam presents the ability to distribute the weight over all surface, being mainly used to manufacture mattresses and pillows in order to provide products which can prevent health problems related with the lack of sleep. The increase of sleeping disorders in the population has involved that the memory foam mattress market has grown 20% in the past eight years, meanwhile for the next three years the expected trend is to achieve the annual increase of 7%. Mattresses waste management is a big problem because of their high volume. They are not desirable items for landfilling and their recycling involves economic drawbacks. These facts, together with the high caloric value of this type of waste, make the waste-to-energy the best disposal option. To optimize this management method it is necessary to know the kinetics of the decomposition of VMF, which has been reported previously1, and the pollutant formation under different conditions. The present work aims to characterize the emissions from pyrolysis and combustion of VMF waste at different temperatures, mainly focusing on the analysis of gases, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs) and Polychlorobiphenyls (PCBs).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Decomposition kinetics of materials combining biomass and electronic waste

  • Conesa, Juan A.
  • Soler, Aurora
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
The disposal of waste from electrical and electronic equipment is an actual problem of industrialized countries. In the present work, thermal decomposition of different materials has been studied in a thermobalance at different heating rates. Kinetic models are proposed for the pyrolysis, gasification and combustion of crushed wood pellets (CWP), halogen-free electrical wires (EWs) and printed circuit boards (PCBs). Three different heating rates were used at each atmosphere condition. One set of parameters can explain all the experiments at the different atmospheres and at the three different heating rates used. In the case of CWP, a model considering three independent first-order reactions gave very good correlations all the heating rates tested both in inert and oxidant atmosphere. The decomposition of synthetic materials (EW and PCB) is modeled by using nth order kinetics. On the other hand, mixtures of these three materials have been prepared and tested for decomposition behavior. A weighted sum of the curves simulated using kinetics of the materials separately gives a good concordance with the experimental curve in the case of PCBs, indicating that there is not chemical interaction between CWP and PCBs when heated and decomposed. This would indicate that the production of pollutants in the decomposition will not be affected by the presence of the other material. Nevertheless, a strong interaction is found with the mixtures between biomass and EW.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modeling the thermal decomposition of automotive shredder residue

  • Conesa, Juan A.
  • Rey Martínez, Lorena
  • Aracil, Ignacio
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
The pyrolysis and combustion of automotive shredder residue (ASR) were studied by dynamic thermogravimetry and derivative thermogravimetry at heating rates of 5, 15 and 30 K min−1 at atmospheric pressure. For the simulation of pyrolysis and combustion processes, two different kinetic models are proposed. One of them is based on the distribution of activation energies (DAEM), with three pools of reactants (three pseudocomponents) because of the complexity of the samples studied. The other model assumes a simple first-order decomposition of the three different fractions. The experimental thermogravimetric data of pyrolysis (oxygen absence) and combustion (at two different oxygen concentrations) processes were simultaneously fitted to determine a single set of kinetic parameters able to describe both processes at the different heating rates. The comparison of the models permits to discuss the importance to consider a DAEM. The experimental results and kinetic parameters may provide useful data for the design of thermal decomposition processing system using ASR as feedstock.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thermogravimetric and kinetic analysis of the decomposition of solid recovered fuel from municipal solid waste

  • Conesa, Juan A.
  • Rey Martínez, Lorena
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
The thermal decomposition of a solid recovered fuel has been studied using thermogravimetry, in order to get information about the main steps in the decomposition of such material. The study comprises two different atmospheres: inert and oxidative. The kinetics of decomposition is determined at three different heating rates using the same kinetic constants and model for both atmospheres at all the heating rates simultaneously. A good correlation of the TG data is obtained using three nth-order parallel reactions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of pollutants evolved from combustion and pyrolysis of flexible polyurethane foam in a laboratory furnace

  • Ortuño García, Nuria
  • Garrido, María A.
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
Every year 30 million mattresses reach their end of life in Europe, being land9ll the 9nal destination of 60<% of this waste and incineration for the rest 40<%. In January of 2030, only 5<% of the total municipal waste could be land9lled; this fact together with the diFculties associated with mattresses recycling, make the incineration the best option for mattresses waste management. 42<% of the mattresses produced in Europe in 2013 were made from polyurethane, 45<% were spring mattresses, 11<% were latex mattresses and the rest made from other compounds. Bearing in mind this distribution, it is important to study the thermal degradation of Kexible polyurethane foam (FPUF), one of the most used materials to produce mattresses. In the present study, the evolved products from the combustion and pyrolysis of FPUF at 550 and 850 ºC have been analysed employing a horizontal quartz laboratory scale reactor. The study includes the analysis of ammonia, carbon oxides, light hydrocarbons, semivolatile compounds such as polycyclic aromatic hydrocarbons (PAHs), chlorobenzenes (ClBzs), chlorophenols (ClPhs), polychlorinated dibenzopdioxins and dibenzofurans (PCDD/Fs) and “dioxin-like” polychlorinated biphenyls (PCBs) in duplicate.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Emissions of Gases, Polycyclic Aromatic Hydrocarbons and Brominated Pollutants during Thermal Degradation of Waste Printed Circuit Boards

  • Soler, Aurora
  • Ortuño García, Nuria
  • Conesa, Juan A.
  • Moltó Berenguer, Julia
  • Font, Rafael
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
Electronic waste is one of the fastest growing waste streams in the world due to the rapid pace of technology enhancement and development. The exponential growth of electronic waste contributes to a rapid increase in the rate of contaminants and waste entering landfills. This fact implies the need for an appropriate management of waste electrical and electronic equipment (WEEE). Printed circuit boards (PCB) are one of the most complex constituents of WEEE, with a mixture of both valuable and/or hazardous elements. Thermal treatments represent an interesting alternative to recycle this kind of waste, but particular attention has to be paid to the potential emissions of toxic by-products. In this study, the emissions from thermal degradation of printed circuit boards (with and without metals) have been studied using a laboratory scale reactor, under oxidizing and inert atmosphere at 600 and 850 oC. The study comprises the analysis of gases, halogens and hydrogen halides, carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), chlorinated phenol, chlorinated benzenes and brominated phenols, among other semivolatile compounds, as well as polybromo- and polychloro- dibenzo-p-dioxins and furans and dioxin-like polychlorobiphenyls. The maximum formation of PAHs was found in pyrolysis at 850 oC, naphthalene being the most abundant. High levels of 2-, 4-, 2,4-, 2,6- and 2,4,6-bromophenols were found, especially at 600 oC. Emissions of PCDD/Fs and dioxin-like PCBs were very slow and much lower than that of PBDD/Fs, due to the higher bromine content of the samples. Combustion at 600 oC was the run with the highest PBDD/F formation: the total content of eleven 2,3,7,8-substituted congeners (tetra- through heptaBDD/Fs) was 7240 and 3250 ng WHO2005-TEQ/kg sample, corresponding to the sample with and without metals, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollutant formation in the pyrolysis and combustion of Automotive Shredder Residue

  • Rey Martínez, Lorena
  • Conesa, Juan A.
  • Aracil, Ignacio
  • Garrido, María A.
  • Ortuño García, Nuria
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
The present work has been carried out to verify the feasibility of thermal valorization of an automobile shredder residue (ASR). With this aim, the thermal decomposition of this waste has been studied in a laboratory scale reactor, analyzing the pollutants emitted under different operating conditions. The emission factors of carbon oxides, light hydrocarbons, PAHs, PCPhs, PCBzs, PBPhs, PCDD/Fs, dioxin-like PCBs and PBDD/Fs were determined at two temperatures, 600 and 850 °C, and under different oxygen ratios ranging from 0 (pure pyrolysis) to 1.5 (over-stoichiometric oxidation). After analyzing all these compounds, we conclude that thermal valorization of ASR is a clean way to treat this waste.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pyrolysis and combustion study of flexible polyurethane foam

  • Garrido, María A.
  • Font, Rafael
The thermal degradation of flexible polyurethane foam has been studied under different conditions by thermogravimetric analysis (TG), thermogravimetric analysis-infrared spectrometry (TG-IR) and thermogravimetric analysis-mass spectrometry (TG-MS). For the kinetic study, dynamic and dynamic+isothermal runs were performed at different heating rates (5, 10 and 20 °C min−1) in three different atmospheres (N2, N2:O2 4:1 and N2:O2 9:1). Two reaction models were obtained, one for the pyrolysis and another for the combustion degradation (N2:O2 4:1 and N2:O2 9:1), simultaneously correlating the experimental data from the dynamic and dynamic+isothermal runs at different heating rates. The pyrolytic model considered consisted of two consecutive reactions with activation energies of 142 and 217.5 kJ mol−1 and reaction orders of 0.805 and 1.246. Nevertheless, to simulate the experimental data from the combustion runs, three consecutive reactions were employed with activation energies of 237.9, 103.5 and 120.1 kJ mol−1, and reaction orders of 2.003, 0.778 and 1.025. From the characterization of the sample employing TG-IR and TG-MS, the results obtained showed that the FPUF, under an inert atmosphere, started the decomposition breaking the urethane bond to produce long chains of ethers which were degraded immediately in the next step. However, under an oxidative atmosphere, at the first step not only the urethane bonds were broken but also some ether polyols started their degradation which finished at the second step producing a char that was degraded at the last stage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gasification and pyrolysis of Posidonia oceanica in the presence of dolomite

  • Conesa, Juan A.
  • Domene, Antonio
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
In the present work, a very detailed study of the reforming of syngas produced in the decomposition of Posidonia oceanica is done. The effect of the presence of different amounts of dolomite is analyzed. Also pyrolysis is studied, in nitrogen atmosphere, and gasification in the presence of air, oxygen and different amounts of steam. A detailed discussion on formation and destruction of tars is done. Furthermore, the effect of the heating rate in the decomposition and the residence time of the evolved gases are discussed. Syngas with ratio H2/CO from 0.3 to ca. 3 can be obtained from this interesting material. Marine species (microalgae) are usually studied with the aim of cultivating them for gas or oil production, but in this paper we draw attention to the possibility of using a natural resource with a very small impact in the ecosystem.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Emissions of toxic pollutants from co-combustion of demolition and construction wood and household waste fuel blends

  • Edo Giménez, María del Mar
  • Ortuño García, Nuria
  • Persson, Per-Erik
  • Conesa, Juan A.
  • Jansson, Stina
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
Four different types of fuel blends containing demolition and construction wood and household waste were combusted in a small-scale experimental set-up to study the effect of fuel composition on the emissions of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), chlorobenzenes (PCBzs), chlorophenols (PCPhs) and polycyclic aromatic hydrocarbons (PAHs). Two woody materials, commercial stemwood (ST) and demolition and construction wood (DC) were selected because of the differences in their persistent organic pollutants (POPs), ash and metals content. For household waste, we used a municipal solid waste (MSW) and a refuse-derived fuel (RDF) from MSW with 5–20 wt% and up to 5 wt% food waste content respectively. No clear effect on the formation of pollutants was observed with different food waste content in the fuel blends tested. Combustion of ST-based fuels was very inefficient which led to high PAH emissions (32 ± 3.8 mg/kgfuel). The use of DC clearly increased the total PCDD and PCDF emissions (71 ± 26 μg/kgfuel) and had a clear effect on the formation of toxic congeners (210 ± 87 ng WHO2005-TEQ/kgfuel). The high PCDD and PCDF emissions from DC-based fuels can be attributed to the presence of material contaminants such as small pieces of metals or plastics as well as timber treated with chromated copper arsenate preservatives and pentachlorophenol in the DC source.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollutant emissions during pyrolysis and combustion of waste printed circuit boards, before and after metal removal

  • Ortuño García, Nuria
  • Conesa, Juan A.
  • Moltó Berenguer, Julia
  • Font, Rafael
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
The constant increase in the production of electronic devices implies the need for an appropriate management of a growing number of waste electrical and electronic equipment. Thermal treatments represent an interesting alternative to recycle this kind of waste, but particular attention has to be paid to the potential emissions of toxic by-products. In this study, the emissions from thermal degradation of printed circuit boards (with and without metals) have been studied using a laboratory scale reactor, under oxidizing and inert atmosphere at 600 and 850 °C. Apart from carbon oxides, HBr was the main decomposition product, followed by high amounts of methane, ethylene, propylene, phenol and benzene. The maximum formation of PAHs was found in pyrolysis at 850 °C, naphthalene being the most abundant. High levels of 2-, 4-, 2,4-, 2,6- and 2,4,6-bromophenols were found, especially at 600 °C. Emissions of PCDD/Fs and dioxin-like PCBs were quite low and much lower than that of PBDD/Fs, due to the higher bromine content of the samples. Combustion at 600 °C was the run with the highest PBDD/F formation: the total content of eleven 2,3,7,8-substituted congeners (tetra- through heptaBDD/Fs) was 7240 and 3250 ng WHO2005-TEQ/kg sample, corresponding to the sample with and without metals, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Marine debris occurrence and treatment: A review

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Marine debris produces a wide variety of negative environmental, economic, safety, health and cultural impacts. Most marine litter has a very low decomposition rate (as plastics, which are the most abundant type of marine debris), leading to a gradual, but significant accumulation in the coastal and marine environment. Along that time, marine debris is a significant source of chemical contaminants to the marine environment. Once extracted from the water, incineration is the method most widely used to treat marine debris. Other treatment methods have been tested, but they still need some improvement and so far have only been used in some countries. Several extraction and collection programs have been carried out. However, as marine debris keep entering the sea, these programs result insufficient and the problem of marine debris will continue its increase. The present work addresses the environmental impact and social aspects of the marine debris, with a review of the state of the art in the treatments of this kind of waste, together with an estimation of the worldwide occurrence and characteristics.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Isocyanate emissions from pyrolysis of mattresses containing polyurethane foam

  • Garrido, María A.
  • Gerecke, Andreas C.
  • Heeb, Norbert
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
This study examined the emissions of powerful asthmatic agents called isocyanates from small-scale pyrolysis experiments of two common foams employed in mattress production such as flexible polyurethane foam (FPUF) and viscoelastic memory foam (VMF). A nitrogen atmosphere and five different temperatures, 300, 350, 400, 450 and 850 °C, were selected to carry out the experiments in order to evaluate the worst possible conditions for thermal degradation. A similar trend for both materials was found. At lower temperatures, diisocyanates were the most important products whereas at 850 °C monoisocyanates, and mainly isocyanic acid released mainly from the thermal cracking of diisocyanates evolved directly from the polymer chains. The total yields of isocyanates were in the range of 1.43–11.95 mg/m3 for FPUF at 300-850 °C and 0.05–6.13 mg/m3 for VMF, 300-850 °C. This difference could be a consequence of the lower amount of isocyanates employed in the VMF production which was confirmed by the nitrogen content of the foams, 5.95% FPUF vs. 3.34% in VMF. Additionally, a qualitative search for so far unknown isocyanates was performed in samples from the pyrolysis of FPUF at 300, 400 and 850 °C. It was confirmed that six different aminoisocyanates at 300 °C were evolved, whereas at 400 and 850 °C only five of them were detected. The general trend observed was a decrease of the aminoisocyanate levels with increasing pyrolysis temperature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pyrolysis of furniture wood waste: Decomposition and gases evolved

  • Moreno Caballero, Ana Isabel
  • Font, Rafael
The pyrolysis of furniture wood waste was studied due to its importance as a thermochemical conversion process, and also because it is a step in the combustion process. Furniture wood contains organic additives and inorganic elements (being noteworthy the high content of Ti). These additives cause changes in the thermal processes. A thermogravimetric analysis of the pyrolysis of furniture wood waste was carried out in a TGA apparatus using dynamic and dynamic + isothermal runs. The pyrolysis was modeled with acceptable approximation by three independent reactions, according to the decomposition of the main components of the wood (hemicellulose, cellulose and lignin). The gaseous products evolved during the pyrolysis were measured by the TG-MS and TG-FTIR techniques. The maximum formation of gases occurs around 360 °C. The CO2 formation remains until the end of the run, due to the wide range of lignin degradation. In addition, runs to identify the volatile and semi-volatile compounds were also carried out in a laboratory scale tubular reactor at 500 and 850 °C and the results were compared with the pyrolysis of a cleaner wood.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gasification and Pyrolysis of Posidonia oceanica in the Presence of Dolomite

  • Iñiguez, María Esperanza
  • Domene, Antonio
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Thermochemical conversion pathways of biomass for the production of primary energy by direct combustion, as well as other thermal processes, have a remarkable drawback among others: tar formation. In the present work, a detailed study of the reforming of syngas produced in the decomposition of Posidonia oceanica is done. The effect of the presence of different amounts of dolomite is analysed. Gasification of the species is done in the presence of sub-stoichiometric air, analyzing the produced gases. Also pyrolysis is studied, in nitrogen atmosphere, and gasification in the presence of air, oxygen and different amounts of steam. A discussion on formation and destruction of tars is done. Furthermore, the effect of the heating rate in the decomposition and the residence time of the evolved gases are discussed. Syngas with ratio H2/CO from 0.3 to ca. 3 can be obtained from this interesting material. It can be concluded that: 1) The presence of increasing percentages of water vapor in the reaction gases in the presence of dolomite increases the ratio H2/CO and decreases the NCV of the gas for all reaction atmospheres and residence times; 2) The highest values of the ratio H2/CO and less NCV are obtained for combustion in sub-stoichiometric air and low residence time; 3) The possible use of syngas goes from heat engines use with internal and external combustion to the processing fluid for obtaining biofuels, methanol, ammonia, synthetic natural gas and hydrogen; 4) If atmospheres are used with an amount of oxygen, it would be necessary a post-treatment aimed to remove the oxygen gas. Marine species (microalgae) are usually studied with the aim of cultivate them for gas or oil production, but in this work we draw attention to the possibility of using a natural resource with a very small impact in the ecosystem.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Levels of dioxin-like PCBs in low-volume serum samples of male patients attending fertility clinics

  • Moltó Berenguer, Julia
  • Paul, Raiza
  • Ortuño García, Nuria
  • Medrano, María Llanos
  • Aizpurua, Jon
  • Gómez-Torres, María José
  • Gómez-Torres, María José|||/items/98e76526-8bb1-4710-9b76-59f6fadc332c
  • Medrano, María Llanos|||/items/d924737e-710c-4fee-ac24-24425cad229a
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
An accurate and easy method for the extraction, cleanup, and HRGC-HRMS analysis of dioxin-like PCBs (DL-PCBs) in low-volume serum samples (1 mL) was developed. Serum samples were extracted several times using n-hexane and purified by acid washing. Recovery rates of labeled congeners ranged from 70 to 110 % and the limits of detection were below 1 pg/g on lipid basis. Although human studies are limited and contradictory, several studies have shown that DL-PCBs can have adverse effects on the male reproductive system. In this way, the present method was applied to 21 serum samples of male patients attending fertility clinics. The total levels obtained for the patients ranged from 6.90 to 84.1 pg WHO-TEQ/g lipid, with a mean value of 20.3 pg WHO-TEQ/g lipid. The predominant PCBs (the sum of PCB 118, 156, and 105) contributed 67 % to the mean concentration of total DL-PCBs in the samples analyzed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Contaminación derivada de la descomposición de residuos. El papel de la industria del cemento

  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Se recogen en este artículo alguno de los aspectos más importantes relacionados con la emisión de contaminantes en la industria del cemento, especialmente en relación con el uso de residuos como combustibles alternativos. Se incide en la importancia de otras fuentes de contaminación, así como en el hecho de que la mayor parte de las emisiones provenientes de quema de residuos tiene lugar sin control de temperatura y aporte de oxígeno.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization of gaseous emissions and ashes from the combustion of furniture waste

  • Moreno Caballero, Ana Isabel
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Gaseous emissions and ash obtained in the combustion of furniture waste have been studied, with particular emphasis on the emissions of hazardous pollutants, such as PCDD/Fs and dl-PCBS. Two different combustion procedures were carried out, one of them in a conventional residential stove (without an automatic control of combustion air and bad mixing of combustion gases with air), and the other in a laboratory-scale reactor (operating under substoichiometric conditions). Three different experiments were carried out in the residential stove, in which the gaseous emissions and ashes obtained were analysed. The fuel burnt out in two of the experiments was furniture wood waste and in one of the experiments, the fuel burnt out was briquettes composed of a mixture of furniture wood with 10 wt.% of polyurethane foam. One of the purposes of these experiments was the evaluation of the possible inhibition effect of the higher nitrogen content on the formation of PCDD/Fs. Slight inhibition of the PCDD/F formation was found although, it is noteworthy that the lowest yield of PAHs, volatile and semi-volatile compounds were obtained in the combustion of these briquettes. In all experiments, the emission factors of polychlorinated dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls (PCDD/Fs and dl-PCBs) were between 29 and 74 ng WHO-TEQ/kg sample burnt, lower than that obtained by other authors in the burning of pine needles and cones. PCDD/Fs and dl-PCBs emissions from furniture wood waste combustion were also analysed in the laboratory scale reactor at 850 °C and the results were compared with the values obtained from the combustion of solid wood (untreated wood). The total equivalent toxicity obtained was 21.1 ng WHO-TEQ/kg sample for combustion of furniture wood waste, which is low in comparison with those obtained for other waste combustion in similar conditions. In the laboratory scale reactor, PCDFs were the dominant compounds in the profiles of PCDD/Fs, by contrast, in the combustion in the residential stove, the majority compounds were PCDDs, due to the different operation conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

PCDD/F determination in sewage sludge composting. Influence of aeration and the presence of PCP

  • Muñoz Fernández, María
  • Garrido, María A.
  • Gómez-Rico, María Francisca
  • Font, Rafael
  • Gómez-Rico, María Francisca|||/items/858ecde1-f676-4a71-982c-77a0fbb2c21c
Composting of sewage sludge is a common practice for sludge disposal. Some previous studies found high levels of polychorodibenzo-p-dioxins and polychorodibenzofurans (PCDD/Fs) after composting, especially octachlorodibenzo-p-dioxin (OCDD) but also 1234678-heptachlorodibenzo-p-dioxin (1234678-HpCDD) to a lesser extent. In this work, the concentrations of OCDD, 1234678-HpCDD and the rest of the 17 toxic congeners of PCDD/Fs were determined in compost obtained under different conditions. Although the toxicity of the two compounds mentioned above is small, their generation may reach undesirable levels. The PCDD/F content was analyzed in a composting plant and in a laboratory test. In both cases, the composted material was a mixture of sewage sludge, straw and sawdust. The composting plant was a tunnel with air turbine aeration and with a turner to homogenize and move the mixture upwards. The laboratory tests were carried out with Dewar vessels (with air dispersion at the bottom and controlled temperature) and with small vessels inside a controlled oven with non-forced aeration. The laboratory runs were also carried out with the addition of pentachlorophenol in some runs, as a dioxin precursor. The highest OCDD levels were found in three samples of the composting plant (30000–90000 pg/g dry matter or dm), with toxicity values surpassing the limit level for soil amendment (17 pg I-TEQ/g dm). Their formation was analyzed considering their concentration vs. that of octachorodibenzofuran (OCDF), which is not formed during composting. In the laboratory, in experiments carried out in a vessel with non-forced aeration conditions and with the addition of pentachlorophenol, the formation of OCDD was significant (e.g. from 80 to 1500 pg/g dm). That means that these two factors, non-forced aeration and the presence of pentachlorophenol, can cause the OCDD formation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combustion of furniture wood waste and solid wood: Kinetic study and evolution of pollutants

  • Moreno Caballero, Ana Isabel
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
This work is focused on the combustion processes of wood waste. Two kinds of waste have been studied: furniture wood waste (treated and used wood) and solid wood from factories (untreated wood). A kinetic study has been carried out for each material in air and an N2:O2 9:1 atmosphere with dynamic and dynamic + isothermal runs at different heating rates, considering the decomposition of the three main components of the wood and also the combustion of the char obtained. Satisfactory kinetic models were obtained for each kind of wood. Significant differences in thermal behavior were found between furniture wood waste and solid wood, probably due to the presence of additives and inorganic compounds in the furniture wood waste, which modifies the kinetic parameters of the thermal process. Moreover, combustion runs at 850 °C of both kinds of woods were also carried out in a laboratory scale tubular reactor in order to analyze the volatile and semivolatile compounds. The main differences were found in the higher yield of nitrogenated compounds found during the combustion of the furniture wood waste.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Semivolatile and Volatile Compound Evolution during Pyrolysis and Combustion of Colombian Coffee Husk

  • Conesa, Juan A.
  • Sánchez, Nazly E.
  • Garrido, María A.
  • Casas, Juan C.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Thermal characterization of coffee husk (Coffea arabica) from Colombian coffee has been studied. Different products, mostly volatile and semivolatile compounds, were analyzed, paying special attention to 16 polycyclic aromatic hydrocarbons (PAHs) classified by the United States Environmental Protection Agency (U.S. EPA) as priority pollutants, frequently used for checking toxicity in environmental samples. A fixed amount of raw material was exposed to different excess air ratios (λ = 0–2.33) and nominal temperature of 1123 K in a horizontal quartz reactor. The results show that coffee husk is a promising biomass for energetic exploitation with reduced formation of PAHs in a low air excess ratio. This implies reduction of carcinogenic potential in the limited presence of oxygen, demonstrated by calculating the carcinogenic potential (KE) for each experimental condition. Most volatile and semivolatile compounds followed different trends, with the oxygen presence prevailing their decomposition with increasing the air excess ratio.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Emissions of PCDD/Fs, PBDD/Fs, dioxin like-PCBs and PAHs from a cement plant using a long-term monitoring system

  • Conesa, Juan A.
  • Ortuño García, Nuria
  • Abad Holgado, Esteban
  • Rivera-Austrui, Joan
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
The aim of the present work was to assess the emission of different persistent organic pollutants from a cement plant over a period of one year, under normal operational conditions. Thus, a long-term sampling device was installed in the clinker kiln stack of the cement plant. The factory uses petroleum coke as primary fuel, but also alternative fuels such as solid recovered fuel (SRF), automotive shredder residue (ASR), sewage sludge, waste tires, and meat and bone meal (MBM) wastes, with an energy substitution level of about 40%. Both PCDD/Fs (together with dl-PCBs) and PBDD/Fs were continuously sampled, with a total of ten samples collected in 2–4 week periods. Also, PAHs were sampled during one-week periods, in order to evaluate their emissions in three different samples. The emission levels throughout the year were much lower than the set legal limits in all substances, being < 10 pg I-TEQ/Nm3 in the case of PCDD/Fs. The data obtained allowed calculation of updated emission factors for the cement sector, which were 8.5 ng I-TEQ/ton clinker for PCDD/Fs and 3.2 ng WHO-TEQ/ton clinker for PCBs. With respect to the congener distribution, 2,3,7,8-TCDF accounts for 60 to 68% of the total toxicity for PCDD/Fs, and in PBDD/F emissions, a clear predominance of octa-substituted species (both dioxin and furan) was found.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollutant emissions from the pyrolysis and combustion of viscoelastic memory foam

  • Garrido, María A.
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Thermal degradation of viscoelastic memory foam (VMF) in a horizontal laboratory scale reactor has been studied. Pyrolysis and combustion experiments under sub-stoichiometric conditions were performed at four different temperatures (550 °C, 650 °C, 750 °C and 850 °C) for the determination of pollutants. Analyses of gas and semivolatile compounds, including polychlorodibenzo-p-dioxins and furans (PCDD/Fs) and dioxin-like polychlorobiphenyls (dl-PCBs) are shown. From the results, it was deduced that pyrolytic conditions favor the formation of PAHs, methane, ethylene, NH3 and dl-PCBs, whereas the presence of oxygen involves a higher emission of PCDD/Fs and simple N-containing compounds such as NO and HCN. The toxic levels calculated for PAHs, PCDD/Fs and dl-PCBs in all cases were low confirming that the incineration of VMF mattress waste could be a good option for waste management. Nevertheless, relatively high emissions of NO, NH3 and HCN were obtained and their reduction must be considered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollutant emissions during the pyrolysis and combustion of flexible polyurethane foam

  • Garrido, María A.
  • Font, Rafael
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Thermal decomposition of flexible polyurethane foam (FPUF) was studied under nitrogen and air atmospheres at 550 °C and 850 °C using a laboratory scale reactor to analyse the evolved products. Ammonia, hydrogen cyanide and nitrile compounds were obtained in high yields in pyrolysis at the lower temperature, whereas at 850 °C polycyclic aromatic hydrocarbons (PAHs) and other semivolatile compounds, especially compounds containing nitrogen (benzonitrile, aniline, quinolone and indene) were the most abundant products. Different behaviour was observed in the evolution of polychlorodibenzo-p-dioxins and furans (PCDD/Fs) at 550 °C and 850 °C. At 550 °C, the less chlorinated congeners, mainly PCDF, were more abundant. Contrarily, at 850 °C the most chlorinated PCDD were dominant. In addition, the total yields of PCDD/Fs in the pyrolysis and combustion runs at 850 °C were low and quite similar.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Relationship between Serum Dioxin-Like Polychlorinated Biphenyls and Post-Testicular Maturation in Human Sperm

  • Paul, Raiza
  • Moltó Berenguer, Julia
  • Ortuño García, Nuria
  • Romero, Alejandro
  • Bezos, Carlos
  • Aizpurua, Jon
  • Gómez-Torres, María José
  • Gómez-Torres, María José|||/items/98e76526-8bb1-4710-9b76-59f6fadc332c
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
  • Romero, Alejandro|||/items/b302b8a7-45cd-4efd-a466-8fc7aab2e97b
The relationship between dioxin-like polychlorinated biphenyl (DL˗PCB) levels in serum and semen parameters were investigated. Our case-control included two groups of patients. Total concentrations of PCBs were significantly higher in the low semen quality (n = 24) than in the normal semen quality (n = 26) group. A significant negative correlation was found between PCB 126 and viability in men with low semen quality, while PCBs 77 and 81 were positively correlated with morphology, and PCB 118, mono-ortho and total DL-PCBs were positively correlated with volume. In the normal semen quality group, PCB 189 and 118 were negatively correlated with sperm motility and volume, respectively. In addition, positive significant correlations were found between PCB 77, 23 and total non-ortho PCBs with regard to morphology. Our findings suggest that sperm motility, viability, volume and morphology are parameters sensitive to alteration by exposure to DL-PCBs, although PCB effects on spermatogenesis were not of clinical significance.