Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recyclability of four types of plastics exposed to UV irradiation in a marine environment

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Plastics are the most abundant products in the world and therefore also represent the largest volume of materials found in the sea. Their resistance to degradation makes them dangerous for the marine environment. In this study, the degradation of the four main plastics (Nylon, Polyethylene (PE), Polypropylene (PP), Polyethylene terephthalate (PET)) found in the sea was observed for 6.5 months as they were exposed to UV irradiation in a marine environment. Data on changes in the physical and chemical properties of each of them were collected in order to evaluate the possibilities of material (mechanical) recycling. A thermobalance was used to look for differences in the thermal decomposition of the plastics during this time. In addition, the mechanical properties of each plastic were studied. Results showed that both thermal and mechanical properties were affected, causing a weakening of the material which became less elastic and more rigid. Furthermore, SEM and AFM images were obtained: they showed cracks, flakes and granular oxidation as well as a loss of homogeneity on the surface of the samples. These changes make mechanical recycling unfeasible, since the quality of the recycled material is insufficient to ensure a high virgin material substitution rate.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Sodium Chloride and Thiourea on Pollutant Formation during Combustion of Plastics

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Thermal decomposition of different samples containing a mixture of plastics (polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), and nylon) combined with NaCl and metal oxides (Fe2O3, CuO) was studied under an air atmosphere at 850 °C using a reactor, followed by analysis of the evolved products. Combustion runs were performed to study how the presence of such compounds influences the production of pollutants. Here, we report the analyses of the emissions of the main gases, as well as volatiles and semivolatiles, including polyaromatic hydrocarbons (PAHs), polychlorinated benzenes and phenols, and polybrominated phenols. Results show that the production of chlorinated pollutants did not increase in the presence of NaCl, but the presence of other metals during the decomposition led to the production of a great amount of pollutants. In this regard, the emission of chlorinated phenols increased from 110 to ca. 250 mg/kg when the sample included a small quantity of a transition metal oxide. Additionally, the presence of an inhibitor—thiourea (TUA)—was tested. Results confirm that adding TUA to the sample reduced these emissions to a considerable extent, with the emission of chlorinated phenols amounting to 65 mg/kg.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollutant content in marine debris and characterization by thermal decomposition

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Marine debris (MDs) produces a wide variety of negative environmental, economic, safety, health and cultural impacts. Most marine litter has a very low decomposition rate (plastics), leading to a gradual accumulation in the coastal and marine environment. Characterization of the MDs has been done in terms of their pollutant content: PAHs, ClBzs, ClPhs, BrPhs, PCDD/Fs and PCBs. The results show that MDs is not a very contaminated waste. Also, thermal decomposition of MDs materials has been studied in a thermobalance at different atmospheres and heating rates. Below 400–500 K, the atmosphere does not affect the thermal degradation of the mentioned waste. However, at temperatures between 500 and 800 K the presence of oxygen accelerates the decomposition. Also, a kinetic model is proposed for the combustion of the MDs, and the decomposition is compared with that of their main constituents, i.e., polyethylene (PE), polystyrene (PS), polypropylene (PP), nylon and polyethylene-terephthalate (PET).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrothermal carbonization (HTC) of marine plastic debris

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Once removed from the sea, some plastics cannot be recycled or reused. This debris has high calorific value which makes it suitable to use as fuel. For this reason, a mixture of plastic materials was subjected to hydrothermal carbonization using seawater as solvent. We could thus examine the characteristics of the final products obtained and test the feasibility of converting marine plastic debris into fuel. Results showed that raising the temperature of the process reduced the inorganic anions content and increased hydrochar NCV. In addition, thermobalance was used to look for differences in the thermal decomposition of the different solid residues, being hydrochar at 300 °C the most affected material. The content of inorganic compounds in the HTC-liquor increases as the process temperature rose. Amides, alcohols and alkanes were the main organic compounds found in all cases. Gases emissions also increased with temperature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Microplastics in Spanish Table Salt

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Marine debris is widely recognized as a global environmental problem. One of its main components, microplastics, has been found in several sea salt samples from different countries, indicating that sea products are irremediably contaminated by microplastics. Previous studies show very confusing results, reporting amounts of microparticles (MPs) in salt ranging from zero to 680 MPs/kg, with no mention of the possible causes of such differences. Several errors in the experimental procedures used were found and are reported in the present work. Likewise, 21 different samples of commercial table salt from Spain have been analyzed for MPs content and nature. The samples comprise sea salts and well salts, before and after packing. The microplastic content found was of 50–280 MPs/kg salt, being polyethylene-terephthalate (PET) the most frequently found polymer, followed by polypropylene (PP) and polyethylene (PE), with no significant differences among all the samples. The results indicate that even though the micro-particles might originate from multiple sources, there is a background presence of microplastics in the environment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gasification and Pyrolysis of Posidonia oceanica in the Presence of Dolomite

  • Iñiguez, María Esperanza
  • Domene, Antonio
  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Thermochemical conversion pathways of biomass for the production of primary energy by direct combustion, as well as other thermal processes, have a remarkable drawback among others: tar formation. In the present work, a detailed study of the reforming of syngas produced in the decomposition of Posidonia oceanica is done. The effect of the presence of different amounts of dolomite is analysed. Gasification of the species is done in the presence of sub-stoichiometric air, analyzing the produced gases. Also pyrolysis is studied, in nitrogen atmosphere, and gasification in the presence of air, oxygen and different amounts of steam. A discussion on formation and destruction of tars is done. Furthermore, the effect of the heating rate in the decomposition and the residence time of the evolved gases are discussed. Syngas with ratio H2/CO from 0.3 to ca. 3 can be obtained from this interesting material. It can be concluded that: 1) The presence of increasing percentages of water vapor in the reaction gases in the presence of dolomite increases the ratio H2/CO and decreases the NCV of the gas for all reaction atmospheres and residence times; 2) The highest values of the ratio H2/CO and less NCV are obtained for combustion in sub-stoichiometric air and low residence time; 3) The possible use of syngas goes from heat engines use with internal and external combustion to the processing fluid for obtaining biofuels, methanol, ammonia, synthetic natural gas and hydrogen; 4) If atmospheres are used with an amount of oxygen, it would be necessary a post-treatment aimed to remove the oxygen gas. Marine species (microalgae) are usually studied with the aim of cultivate them for gas or oil production, but in this work we draw attention to the possibility of using a natural resource with a very small impact in the ecosystem.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pollution in the Marine Environment: Plastics, Microplastics and Organic Pollutants

  • Conesa, Juan A.
  • Iñiguez, María Esperanza
  • Fullana, Andres
  • Ortuño García, Nuria
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
Marine debris (MDs) produces a wide variety of negative environmental, economic, safety, health and cultural impacts, thus further research should focus on these kinds of waste. The present work has three main purposes: First, characterization of the MDs has been carried out in terms of their plastic composition, and their pollutant content (PAHs, ClBzs, ClPhs, BrPhs, PCDD/Fs and PCBs). Thermogravimetry has been used to identify the main constituents of the debris, using kinetic modelling to fit the proportion of each plastic. The decomposition of MDs is compared with that of their neat constituents, i.e. polyethylene (PE), polystyrene (PS), polypropylene (PP), nylon and polyethylen-tereftalate (PET). Furthermore, the analysis of pollutants in the samples reveal that MDs is not a highly contaminated waste. In addition, thermal decomposition of MD materials has been studied in a thermobalance at different atmospheres and heating rates. Second, a method for reusing the MDs is presented, consisting on the hydrothermal carbonization (HTC) of the wastes and the seawater where they are found. The plastics, once removed from the sea, cannot usually be recycled or reused. This debris has high net calorific value (NCV) what makes them suitable as a fuel. For this reason, a mixture of plastic materials was treated by HTC using seawater as a solvent, to examine the characteristics of the final products obtained and to test the feasibility of converting marine plastic debris to fuel. Results showed that an increase in the temperature of the process reduces the content of the inorganic anions and increases the NCV of the hydrochar (HTC char). The content of inorganic compounds in the HTC-liquor was measured, which increases as the process temperature rises. Organic compounds were also analyzed, being amides, alcohols and alkanes the major compounds in all cases. Finally, worried about the way in which these plastics reach the human being, microplastics where measured in sea products, more specifically in salt samples. In this sense, 21 different samples of commercial table salt from Spain have been analyzed for MP content and nature. The samples comprise sea salts and rock salts, before and after packing. Results indicate that even though the micro-particles might originate from multiple sources, there is a background presence of microplastics in the environment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of marine ambient in the production of pollutants from the pyrolysis and combustion of a mixture of plastic materials

  • Iñiguez, María Esperanza
  • Conesa, Juan A.
  • Soler, Aurora
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
A mixture of polyethylene (PE), polyethylene-terephtalate (PET), polypropylene (PP) and Nylon was submerged in marine water during 12 moths. The chlorine content of these plastics was measured through the passing time. Thermobalance was used to look for differences in the thermal decomposition of the plastics during in that time interval. Degradation of PET, PP and Nylon produced changes in the weight loss curve, but behaviour of PE is confusing. Pyrolysis and combustion at 850 °C was finally performed to get knowledge of the possible differences in the emission of main gases, volatiles and semivolatiles including polycyclic aromatic hydrocarbons (PAHs), polychlorinated benzenes (ClBzs), polychlorinated phenols (ClPhs), polybrominated phenols (BrPhs), polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Results show that the emission of chlorinated species is somewhat not affected by the chlorine content of the plastics mix. The production of PCBs and PCDD/Fs was very low, under 4 pg WHO-TEQ/g.