Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visibility of sparkle in metallic paints

  • Kirchner, Eric
  • Van der Lans, Ivo
  • Perales, Esther
  • Martínez-Verdú, Francisco M.
  • Campos Acosta, Joaquín
  • Ferrero Turrión, Alejandro
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
For suitable illumination and observation conditions, sparkles may be observed in metallic coatings. The visibility of these sparkles depends critically on their intensity, and on the paint medium surrounding the metallic flakes. Based on previous perception studies from other disciplines, we derive equations for the threshold for sparkles to be visible. The resulting equations show how the visibility of sparkles varies with the luminosity and distance of the light source, the diameter of the metallic flakes, and the reflection properties of the paint medium. The predictions are confirmed by common observations on metallic sparkle. For example, under appropriate conditions even metallic flakes as small as 1 μm diameter may be visible as sparkle, whereas under intense spot light the finer grades of metallic coatings do not show sparkle. We show that in direct sunlight, dark coarse metallic coatings show sparkles that are brighter than the brightest stars and planets in the night sky. Finally, we give equations to predict the number of visually distinguishable flake intensities, depending on local conditions. These equations are confirmed by previous results. Several practical examples for applying the equations derived in this article are provided.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of color perceptibility of gonio‐apparent panels with curvature angle

  • Chorro, Elísabet
  • Perales, Esther
  • Viqueira, Valentín
  • Martínez-Verdú, Francisco M.
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
Color tolerances of curved gonio‐apparent panels have been studied in this work. To achieve that, an experimental set‐up of the illumination and tilt variation of two identical coated panels was designed for simulation of curved panels with both concave and convex borders and with and without effect pigments (perceived as solid and gonio‐apparent colors, respectively). Finally, visual and instrumental measures were collected with both curvatures. The results show that the relationship of the instrumental color difference with the tilt angle can be modeled by a second‐order and the vertex did not depend on illumination, but on coating type. The critical angles (the angle marked when the color discrepancy between two identical samples is merely perceived) assessed by the observers showed that they were not equal according to border, nor according to coating type. The color tolerances at these angles were clearly higher than the conventional chromatic thresholds of industrial color comparisons.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Validation of a gonio-hyperspectral imaging system based on light-emitting diodes for the spectral and colorimetric analysis of automotive coatings

  • Burgos Fernández, Francisco Javier
  • Vilaseca Ricart, Meritxell
  • Perales, Esther
  • Chorro, Elísabet
  • Martínez-Verdú, Francisco M.
  • Fernández-Dorado, José
  • Pujol Ramo, Jaume
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
In this study, a novel gonio-hyperspectral imaging system based on light-emitting diodes for the analysis of automotive coatings was validated colorimetrically and spectrally from 368 to 1309 nm. A total of 30 pearlescent, 30 metallic, and 30 solid real automotive coatings were evaluated with this system, the BYK-mac and X-Rite MA98 gonio-spectrophotometers, and also with the SPECTRO 320 spectrometer for further comparison. The results showed very precise correlations, especially in the visible range. In conclusion, this new system provides a deeper assessment of goniochromatic pigments than current approaches due to the expansion of the spectral range to the infrared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Texture Evaluation of Automotive Coatings by Means of a Gonio-Hyperspectral Imaging System Based on Light-Emitting Diodes

  • Burgos Fernández, Francisco Javier
  • Pujol Ramo, Jaume
  • Perales, Esther
  • Martínez-Verdú, Francisco M.
  • Vilaseca Ricart, Meritxell
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
Sparkle and graininess are textural effects that appear as intrinsic spatial features of coatings containing goniochromatic pigments, whereas others such as mottling are undesired outcomes. In this study, we present new methods for the evaluation of sparkle, graininess and mottling of automotive coatings through images acquired with a novel gonio-hyperspectral imaging system based on light-emitting diodes with extended spectral sensitivity beyond the visible range (368–1309 nm). A novel analysis of sparkle that considered the amount of sparkling spots was used. Graininess was quantified through a novel statistical descriptor based on the energy descriptor computed from the histogram. A new index was proposed for an enhanced detection of mottling based on the analysis of striping, which was better observed and quantified in the infrared range. Spectral assessments showed a strong relationship with color and spectral reflectance for graininess and mottling. In conclusion, the results showed that these new spatial and spectral methods are a suitable, alternative and potential approach for the assessment of these textural features.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mejora de las propiedades térmicas y ópticas de una bioresina empleando Nanopigmentos con colorantes naturales

  • Micó-Vicent, Bàrbara
  • Perales, Esther
  • Chorro, Elísabet
  • Gómez Lozano, Omar
  • Viqueira, Valentín
  • Martínez-Verdú, Francisco M.
  • Gilabert Pérez, Eduardo
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
En este trabajo se lleva a cabo la optimización del proceso de síntesis de nanopigmentos híbridos naturales a partir de tres colorantes naturales; extracto de clorofila, β-caroteno, y extracto de raíz de remolacha. El objetivo es determinar los aditivos que deben emplearse en el proceso de síntesis, así como el orden en el que deben emplearse. Para este fin, se emplea el diseño estadístico de experimentos L9 de Taguchi. Las respuestas a optimizar son referentes al rendimiento de los nanopigmentos en la aplicación de una resina epoxy biodegradable. En el trabajo se evaluarán la temperatura de degradación térmica de la bioresina y la resistencia a la radiación UV-Vis de las muestras. Cómo podrá observarse los mejores resultados se obtienen al emplear hidrotalcita calcinada o no previamente a 600oC durante 3h.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spectrally tunable light source based on light-emitting diodes for custom lighting solutions

  • Burgos Fernández, Francisco Javier
  • Vilaseca Ricart, Meritxell
  • Perales, Esther
  • Herrera Ramírez, Jorge Alexis
  • Martínez-Verdú, Francisco M.
  • Pujol Ramo, Jaume
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
This study describes a novel spectral LED-based tunable light source used for customized lighting solutions, especially for the reconstruction of CIE (Commission Internationale de l’Éclairage) standard illuminants. The light source comprises 31 spectral bands ranging from 400 to 700 nm, an integrating cube and a control board with a 16-bit resolution. A minimization algorithm to calculate the weighting values for each channel was applied to reproduce illuminants with precision. The differences in spectral fitting and colorimetric parameters showed that the reconstructed spectra were comparable to the standard, especially for the D65, D50, A and E illuminants. Accurate results were also obtained for illuminants with narrow peaks such as fluorescents (F2 and F11) and a high-pressure sodium lamp (HP1). In conclusion, the developed spectral LED-based light source and the minimization algorithm are able to reproduce any CIE standard illuminants with a high spectral and colorimetric accuracy able to advance available custom lighting systems useful in the industry and other fields such as museum lighting.