Pasar al contenido principal

RED DE PILAS DE COMBUSTIBLE PARA UN FUTURO ENERGETICO SOSTENIBLE

ENE2017-90932-REDT

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal-free heteroatom-doped carbon-based catalysts for ORR. A critical assessment about the role of heteroatoms

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during last years because of their interesting properties towards oxygen reduction reaction. Intrinsic parameters of carbon materials such as porosity, structural order, conductivity and defects have proved to have a strong influence in the catalytic activity of these materials. However, the highest differences in catalytic activity are obtained via doping with heteroatoms, being nitrogen the most remarkable in terms of activity and selectivity. One of the most challenging goals of the scientific community is to unravel the role of the functional groups in order to design an optimized material. However, the complexity of isolating one specific functionality, the difficult unambiguous characterization of the species and the influence of the intrinsic properties of the carbon materials, make the identification of the active sites a complex and controversial issue. This review presents a critical assessment about the role of heteroatoms on ORR from the analysis of the literature that combine both experimental work and computational modelling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical functionalization of single wall carbon nanotubes with phosphorus and nitrogen species

  • Quintero-Jaime, Andrés Felipe
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Single Wall Carbon Nanotubes (SWCNTs) have been successfully functionalized by electrochemical oxidation in presence of 4-aminophenyl phosphonic acid (4-APPA). Electrochemical modification has been performed by cyclic voltammetry using different upper potential limits, producing the incorporation of N and P functionalities on SWCNT through polymerization reactions, although some covalent attachment cannot be discarded. Electrochemical oxidation in presence of CNT produces polymerization of 4-APPA, what has been related to the interaction between monomer and the CNT surface. The voltammograms of the functionalized SWCNT show different well-defined redox processes that are maintained at high pH. Raman spectroscopy shows that the structure of the SWCNT is maintained even at high potentials suggesting that oxidation selectively occurs in the 4-APPA monomer favoring polymer chain growth. The degree of modification of SWCNT can be easily controlled by selecting the electrochemical conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards understanding the active sites for the ORR in N-doped carbon materials through fine-tuning of nitrogen functionalities: an experimental and computational approach

  • Quílez-Bermejo, Javier
  • Melle-Franco, Manuel
  • San-Fabián, Emilio
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The design of advanced N-doped carbon materials towards oxygen reduction reaction (ORR) catalysis is only possible if the nature of the active sites is fully understood. There is an important piece of research seeking to overcome this challenge through experimental or theoretical results. However, the combination of both approaches is necessary to deepen the knowledge about this subject. This work presents excellent agreement between experimental results and computational models, which provides evidence of the nature of the most active sites in N-doped carbon materials. N-doped carbon materials have been experimentally obtained through double stage treatment of polyaniline in distinct atmospheres (both oxygen-containing and inert atmospheres) at different temperatures (800–1200 °C). According to temperature programmed desorption (TPD), Raman spectroscopy, N2-adsorption isotherms at −196 °C and X-ray photoelectron spectroscopy (XPS), this synthesis method results in the selective formation of nitrogen species, without significant changes in structural order or porosity. ORR catalytic tests evidence the highly efficient catalysis, with platinum-like performance in terms of the current density and onset potential, of N-doped carbon materials selectively containing graphitic-type nitrogen species. Computational chemistry, through DFT calculations, shows that edge-type graphitic nitrogen is more effective towards ORR catalysis than pyridinic, pyrrolic, pyridonic, oxidized and basal-type graphitic nitrogen species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen-Doped Superporous Activated Carbons as Electrocatalysts for the Oxygen Reduction Reaction

  • Mostazo-López, María José
  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Nitrogen-containing superporous activated carbons were prepared by chemical polymerization of aniline and nitrogen functionalization by organic routes. The resulting N-doped carbon materials were carbonized at high temperatures (600–800 °C) in inert atmosphere. X-ray Photoelectron Spectroscopy (XPS) revealed that nitrogen amount ranges from 1 to 4 at.% and the nature of the nitrogen groups depends on the treatment temperature. All samples were assessed as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline solution (0.1 M KOH) in order to understand the role of well-developed microporosity as well as the different nitrogen functionalities on the electrocatalytic performance in ORR. It was observed that nitrogen groups generated at high temperatures were highly selective towards the water formation. Among the investigated samples, polyaniline-derived activated carbon carbonized at 800 °C displayed the best performance (onset potential of 0.88 V versus RHE and an electron transfer number of 3.4), which was attributed to the highest concentration of N–C–O sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen Doped Superactivated Carbons Prepared at Mild Conditions as Electrodes for Supercapacitors in Organic Electrolyte

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Tagaya, Tomomi
  • Hatakeyama, Yoshikiyo
  • Shiraishi, Soshi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen functionalization of a highly microporous activated carbon (SBET > 3000 m2/g), to be used as electrode of electric double layer capacitor (EDLC), was carried out by different methods based on organic chemistry protocols at low temperature and selective thermal post-treatments under inert atmosphere. The combination of both methods allowed the production of carbon materials with very similar surface area (2400–3000 m2/g) and different surface chemistry. The nitrogen functionalization by chemical methods produce the attachment of 4 at. % N (XPS) by consumption of oxygen functional groups. The thermal treatments rearrange the surface chemistry by decreasing and converting both nitrogen and oxygen moieties. The effect of surface chemistry on the performance of these materials as electrodes for symmetric supercapacitors was analyzed in organic electrolyte (1M TEMABF4/propylene carbonate). The devices showed high gravimetric capacitance (37–40 F/g) and gravimetric energy density (31–37 Wh/kg). The electrochemical stability of the EDLC was evaluated by a floating test under severe conditions of voltage and temperature. The results evidence an improvement of the durability of nitrogen-doped activated carbons modified by chemical treatments due to the decrease of detrimental oxygen functionalities and the generation of nitrogen groups with higher electrochemical stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polyaniline-Derived N-Doped Ordered Mesoporous Carbon Thin Films: Efficient Catalysts towards Oxygen Reduction Reaction

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One of the most challenging targets in oxygen reduction reaction (ORR) electrocatalysts based on N-doped carbon materials is the control of the pore structure and obtaining nanostructured thin films that can easily be incorporated on the current collector. The carbonization of nitrogen-containing polymers and the heat treatment of a mixture of carbon materials and nitrogen precursor are the most common methods for obtaining N-doped carbon materials. However, in this synthetic protocols, the surface area and pore distribution are not controlled. This work enables the preparation of 2D-ordered N-doped carbon materials through the carbonization of 2D polyaniline. For that purpose, aniline has been electropolymerized within the porous structure of two different templates (ordered mesoporous Silica and ordered mesoporous Titania thin films). Thus, aniline has been impregnated into the porous structure and subsequently electropolymerized by means of chronoamperometry at constant potential. The resultant samples were heat-treated at 900 °C with the aim of obtaining 2D N-doped carbon materials within the template structures. Polyaniline and polyaniline-derived carbon materials have been analyzed via XPS and TEM and characterized by electrochemical measurements. It is worth noting that the obtained 2D-ordered mesoporous N-doped carbon materials have proved to be highly active electrocatalysts for the ORR because of the formation of quaternary nitrogen species during the heat treatment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical performance of N‐doped superporous activated carbons in ionic liquid‐based electrolytes

  • Mostazo-López, María José
  • Krummacher, Jakob
  • Balducci, Andrea
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical performance of nitrogen-doped and non-doped superporous activated carbons as electrodes for supercapacitors was assessed in organic and ionic liquid-based electrolytes. The nitrogen functionalization was carried out through post-modification treatments at mild conditions to produce N-doped activated carbons that preserve the microporosity of the pristine carbon material. The electrodes based on these materials provide large capacitance values (up to 150–180 F/g) in both 1 M Pyr14TFSI/PC and 1 M Pyr14BF4/PC due to their tailored porous texture, given by their well-developed microporosity and low mesopore volume. The electrochemical double layer capacitors based on these materials displayed outstanding capacitance (37–40 F/g and 14 F/cm3) and energy values (44–48 Wh/kg and 16–17 Wh/L). The nitrogen-doped activated carbons evidence high stability at positive and negative polarization potentials due the presence of specific N functionalities. The results prove that surface chemistry of carbon materials plays a key role on their degradation under high operation voltage conditions. The durability of the devices can be improved by doping carbon electrodes with selected nitrogen groups, such as nitrogen heterocycles and amine-like surface functionalities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the Origin of the Effect of pH in Oxygen Reduction Reaction for Nondoped and Edge-Type Quaternary N-Doped Metal-Free Carbon-Based Catalysts

  • Quílez-Bermejo, Javier
  • Strutyński, Karol
  • Melle-Franco, Manuel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during the last 15 years as an alternative toward the replacement of platinum-based catalysts for the oxygen reduction reaction (ORR). However, carbon-based catalysts only show promising catalytic activity in alkaline solution. Concurrently, the most optimized polymer electrolyte membrane fuel cells use proton exchange membranes. This means that the cathode electrode is surrounded by a protonic environment in which carbon materials show poor performance, with differences above 0.5 V in EONSET for nondoped carbon materials. Therefore, the search for highly active carbon-based catalysts is only possible if we first understand the origin of the poor electrocatalytic activity of this kind of catalysts in acidic conditions. We address this matter through a combined experimental and modeling study, which yields fundamental principles on the origin of the pH effects in ORR for carbon-based materials. This is relevant for the design of pH-independent metal-free carbon-based catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Residuos de biomasa como plataforma para obtener materiales carbonosos porosos mediante carbonización hidrotermal en presencia de H3PO4, Biomass wates as plataform to obtain porous carbon materials through a hydrothermal carbonization in presence of H3PO4

  • Chaparro-Garnica, Jessica
  • Mostazo-López, María José
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
La carbonización hidrotermal (HTC) es un proceso útil para la producción de materiales carbonosos a partir de residuos de biomasa. Sin embargo, para desarrollar una porosidad elevada es necesario emplear un tratamiento de activación adicional. Entre los métodos de activación más utilizados para los residuos de biomasa está la activación química empleando ácido fosfórico (H3PO4) como agente activante. Nuestro grupo de investigación ha desarrollado un proceso basado en un tratamiento hidrotermal en presencia de una disolución acuosa de ácido fosfórico de baja concentración, evitando así la etapa de impregnación, que puede producir materiales carbonosos con un elevado desarrollo de porosidad. Este proceso basado en un tratamiento hidrotermal es prometedor para obtener materiales carbonosos de bajo coste, ya que es respetuoso con el medio ambiente al involucrar recursos renovables y la posibilidad de reutilizar la disolución de ácido fosfórico. En este trabajo se presenta la caracterización de materiales carbonosos porosos obtenidos mediante este procedimiento y sus perspectivas para futuras aplicaciones en almacenamiento de energía.