Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Unlocking synergistic benefits of the calcium looping-calcium hydroxide integration for energy storage: A perspective on sorbent performance

  • Arcenegui Troya, Juan
  • Carro, Andrés
  • Ortiz, Carlos
  • Chacartegui, Ricardo
  • Perejón, Antonio
  • Pérez Maqueda, Luis A
  • Sánchez-Jiménez, Pedro E.
Calcium Looping has recently attracted attention as a high temperature thermochemical energy storage system. However, significant sintering due to the high temperatures hampers the recyclability of CaO. Hydration and hydroxylation has been explored as a method to regenerate the spent CaO. This study investigates a novel synergistic integration of carbonation (CaCO3/CaO) and hydroxylation (CaO/Ca(OH)2) reactions. Calcination was conducted in N2 and N2/H2O mixtures with 29 % steam content. Carbonation was conducted in CO2/H2O mixture with similar steam concentrations. Results show that steam plays a dual role: during calcination, it promotes the formation of large pores on the CaO surface, and during carbonation, it enhances mineralization, resulting in larger CaCO3 grains. Also, steam promotes CO2 diffusion through the CaCO3 layer and, at the same time, significantly mitigates the deactivation of CaO along the cycles. Specifically, sequential calcination/carbonation cycles without steam yield a residual conversion value of 0.14. Steam injection improved residual conversion to 0.27. Alternatively, the interleaving of hydroxylation/dehydroxylation cycles in the sequence further increased this value to 0.64 without steam and up to 0.76 with steam injection. Hydroxylation/dehydroxylation cycles alone demonstrated high stability, with a residual conversion of 0.98 when interleaved with calcination/carbonation cycles under 29 % steam conditions. Additionally, frequent hydroxylation/dehydroxylation cycles improve overall conversion stability, highlighting their synergistic benefits within the integrated process. This work underscores the potential of integrating Calcium Looping with Calcium Hydroxide for improved multicycle performance and opens pathways for scaling experiments to pilot systems, alongside assessing the efficiency and economic viability of this integrated approach., Financial support is acknowledged from grants TED2021-131839B-C22 and PDC2021-121552-C21 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, and the grant PID2022-140815OB-C22 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Enhancing the Multicycle Performance of SrCO₃-Based Thermochemical Energy Storage Using SnO2

  • Santamaria Padilla, Adriana
  • Romero-Paredes Rubio, Hernando
  • Sánchez-Jiménez, Pedro E.
  • Perejón, Antonio
This work investigates the potential of strontium carbonate (SrCO3) as a thermochemical energy storage (TCES) material and explores the incorporation of tin (IV) oxide (SnO2) as a chemical spacer to enhance its multicycle performance. High-purity SrCO3 and SnO2 were used to prepare composites with various mass proportions. The composites were subjected to repeated calcination/carbonation cycles under controlled conditions. Experimental results indicate that pure SrCO3 achieves a high initial effective conversion at 900 °C; however, its performance degrades significantly over successive cycles. In contrast, the SrCO3/SnO2 composite containing 15 wt% SnO2 (SrSnO15) maintained a stable effective conversion compared to a drop to 0.11 in pure SrCO3 by the ninth cycle. Structural characterization using X-ray diffraction and scanning electron microscopy revealed the formation of secondary phases, including strontium stannate (SrSnO3) and a spinel phase (Sr2SnO4), which impact the reactivity of the material. Additionally, a pressure swing approach was applied to reduce the calcination temperature, which improved the effective conversion during initial cycles by delaying spinel formation; however, its benefits diminished over extended cycling. Comparative analysis with literature data underscores the promising performance of the SrSnO15 composite. Overall, the results demonstrate that SnO2 addition enhances the long-term cyclic stability and energy storage capacity of SrCO3-based TCES systems, paving the way for more efficient and durable renewable energy storage solutions., The authors acknowledge the financial support received through CONAHCYT as part of the Call for Basic and Frontier Science 2023-2024 within Strategic Project No. CBF2023-2024-3410, entitled "Development of Advanced Methods and New Materials for Solar Thermal Energy Storage Using Reversible Solid-Gas Reaction Cycles to Enhance the Use of Solar Technology," which enabled the development of research and support of human resource training at the graduate level. Financial support is also acknowledged from grants TED2021-131839B–C22 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, and the grant PID2022-140815OB-C22 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. The authors acknowledge the financial support received through the support scholarship by CONAHCYT with number 814358., No