Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Oujja, M., Agua, F., Sanz, M., Morales-Martín, D., García-Heras, M., Villegas M.A., Castillejo, M. 2021. Multiphoton Excitation Fluorescence Microscopy and Spectroscopic Multianalytical Approach for Characterization of Historical Glass Grisailles. Talanta 230, 122314”

  • Oujja, Mohamed
  • Agua Martínez, Fernando
  • Sanz, Mikel
  • Morales-Martín, D.
  • Carmona-Quiroga, Paula
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
  • Castillejo, Marta
Laser-induced Breakdown Spectrocopy (LIBS) analyses of glass without grisaille (body surface) and the grisaille itself were performed using laser excitation at 266 nm (Nd:YAG laser, 6 ns pulses, 10 Hz repetition rate; Quantel Brilliant) and a 0.30 m spectrograph with a 1200 grooves/mm grating (TMc300 Bentham) coupled to an intensified charged coupled detector (ICCD, 2151 Andor Technologies). The fluence was of 6.6 J cm− 2. LIBS spectra were recorded with a gate delay and width of 100 ns and 3 μs, respectively. For the Laser-induced Fluorescence (LIF) analyses, the same equipment described above was used. However, time gate was operated with a zero-time delay, the grating was 300 lines/mm and the number of accumulations of 25. The fluence was 6 × 10− 3 J cm− 2. A home-made nonlinear optical microscope (NLOM) was used for Multi-Photon Excitation Fluorescence (MPEF) measurements of grisaille thickness with a mode-locked Ti:Sapphire femtosecond laser. The laser emits at 800 nm, with an average power of 680 mW, delivering 70 fs pulses at a repetition rate of 80 MHz and a laser power of 6–9 mW. The laser beam was modulated using a chopper at a frequency of 130 Hz and conducted to the sample through the aperture of a microscope objective lens (M Plan Apo HL 50X, Mitutoyo, NA 0.42). The focal plane of the laser was selected with motorized translation XYZ stages (Standa 8MVT100-25-1 for XY and Standa 8MTF for Z). In-depth cross section imaging of carbon coated glasses decorated with grisaille paint was carried out by Field Emission Scanning Electron Microscope (FESEM) with a Hitachi S-4800 cold cathode equipment, working with acceleration voltage of 15 kV. An Oxford X-Max of 20 mm2 system coupled to the electron microscope with resolution of 125 eV (Mg Kα) was used for Energy Dispersive X-Ray Spectroscopy (EDS) microanalyses. More details of the experimental conditions are available in their respective data folder. Data life: 2021- (unlimited validity). This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Talanta, 230: 122314 (2021) (http://hdl.handle.net/10261/244443) in which the thickness and composition of grisaille paints in four Spanish historical stained glasses, named Balmaseda (A; 19th century), Girona (B; 18th century), Leon (C; 13th century) and Goyeneche (D; early 20th century) after their place of origin, have been determined. The samples are glass fragments without value for their replacement available from previous conservation works made by some of the authors. This data set includes the results of the chemical and physical characterization of grisaille with a set of optical and spectroscopic techniques, including non-invasive techniques such as the emerging Nonlinear Optical Microscopy (NLOM) in the modality of Multi-Photon Excitation Fluorescence (MPEF). This allows determining the thicknesses values of the historical grisaille paint layers on the basis of their intrinsic fluorescence without photochemical and physical damage. The results obtained (FWHM values of depth scan after refractive index correction) show significant consistency and agreement with those obtained from traditional Field Emission Scanning Electron Microscope (FESEM) in which mean thickness varies between 26-78 µm. Scanning Electron Microscope coupled with Energy Dispersive X-Ray Spectroscopy (FESEM-EDS) and Laser Induced Breakdown Spectrosocopy (LIBS) show the elemental composition of both the body glass and the grisaille paint in the 4 samples according to the respective emission lines of the main and minor components. And finally, Laser Induced Fluorescence (LIF) provides complementary information (fluorescence species)., We acknowledge financial support from the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-104220RB-I00/AEI/10.13039/501100011033; from the Community of Madrid through project TOP Heritage-CM (S2018/NMT-4372); from European Union’s Horizon 2020 through IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) project and CSIC through M.O.’s contract., dc.description.tableofcontentsLIBS folder: LIBS_readme; LIBS_A-glass; LIBS_A-grisaille; LIBS_B-glass; LIBS_ B-grisaille; LIBS_C-glass; LIBS_C-grisaille; LIBS_D-glass; LIBS_D_grisailleLIF folder: LIF_readme; LIF_A-glass; LIF_A-grisaille; LIF_B-glass; LIF_B-grisaille; LIF_C-glass; LIF_C-grisaille; LIF_D-glass; LIF_D-grisailleNLOM folder: NLOM_readme; NLOM_A-grisaille_l; NLOM_A-grisaille_h; NLOM_B-grisaille_l; NLOM_B-grisaille_h; NLOM_C-grisaille_l; NLOM_C-grisaille_h; NLOM_D-grisaille_l; NLOM_D-grisaille_hFESEM-EDS folder: FESEM-EDS_readme; EDS_A-grisaille; EDS_B-grisaille; EDS_C-grisaille; EDS_D-grisaille; FESEM_A-grisaille; FESEM_B-grisaille; FESEM_C-grisaille; FESEM_D-grisaillePHOTOS folder: Photos_redame; A-glass_grisaille; B-glass_grisaille; C-glass_grisaille; D-glass_grisaille O, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Oujja, M., Palomar, T., Martínez-Weinbaum, M., Martínez-Ramírez S., Castillejo, M. 2021. Characterization of medieval-like glass alteration layers by laser spectroscopy and nonlinear optical microscopy. Eur. Phys. J. Plus 136, 859"

  • Oujja, Mohamed
  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Castillejo, Marta
The study was undertaken in six medieval-like model glass samples UG (unaltered glass), MAK, MAR, MTA, MTB and MTN subjected to various environmental and atmospheric conditions in order to generate alteration layers of different characteristics. A potash-lime silicate glass, with composition similar to that of medieval glasses, was melted at 1400 °C during two hours, poured in a brass mould of rectangular cross section and annealed at 650 °C. The resulting glass ingot was cut in slices of around 10×10×2 mm3 and then polished using emery paper and an aqueous suspension of cerium oxide to obtain optical quality surfaces. Alteration of the glass slices was conducted by exposure to five different laboratory corrosion tests: SO2 corrosion for MAK sample, synthetic river water degradation for MAR, and degradation due to acid, basic and neutral medium for MTA, MTB and MTN, respectively. This dataset consists of images of the samples; Laser-induced Breakdown Spectrocopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; Optical Microscopy (OM); FT-Raman spectroscopy and Multi-Photon Excitation Fluorescence (MPEF) signals obtained with a Nonlinear optical microscopy (NLOM). This information allows characterizing the composition of both body glass and determining the thickness of the degradation layer. Images are presented in JPG. All spectra are presented in cvs format, in a single page. Descriptions of the samples and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. For LIBS, 1 file per sample of elemental composition of the medieval-like glass are included. Each file is composed of 2 columns (wavelength and intensity). For LIF, 1 file per sample of the analysis of fluorescent species of each medieval-like glass are included. Each file is composed of 2 columns (wavelength and intensity). For NLOM, 2 files per sample. In the first one: “MPEF Safe limits”, each file is composed for 10 columns: 2 are for depth (µm) and 8 are for MPEF signal divided in two groups relating to the the power in the sample surface. In the second group of files: “MPEF profiles”, each file is composed for 4 columns: 1 is for depth (µm), 1 is the normalized MPEF intensity, 1 is the Lorentzian fit of depth (µm) and the last one Lorentzian fit. (The thicknesses of the degradation layers of the medieval-like glasses is calculated by the FWHM values of the fits after refractive index corrections). For FT-Raman, 1 file per sample of the analysis of the structure of the medieval-like glass through their vibrational modes is included. Each file is composed of 2 columns (Raman shift and intensity in arbitrary units). This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Eur. Phys. Plus, 136:859 (2021) (http://hdl.handle.net/10261/248668). Historical glass-based objects undergo, since the time of their manufacture, different degradation phenomena that are related to their composition and to the environment to which they were exposed. Three-dimensional (3D) structural and chemical characterization of the degradation layers is important to select the most adequate conservation strategies for glass objects. Optical microscopy (OM) is the most frequently used non-destructive method to examine the surface of historical glasses; however, the 3D structural assessment of alteration layers requires applying the destructive modality of this technique to conduct a cross-sectional study. In this work, a different approach for structural and compositional characterization of alteration layers on model medieval-like glasses is presented, based on the combination of the laser spectroscopies of laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF) and FT-Raman, and the emerging, cutting edge technique of nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). The results obtained through this multi-analytical photonic approach were compared with those retrieved by examination of the surface and cross sections of the samples by OM and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS). While the combination of LIBS, LIF and FT-Raman served to assess the composition of the various alteration layers, the use of MPEF microscopy allowed the non-destructive determination of the thicknesses of these layers, showing for both thickness and composition a good agreement with the OM and SEM–EDS results. Thus, the proposed approach, which avoids sample preparation, illustrates the capability of non-destructive, or micro-destructive in the case of LIBS, laser spectroscopies and microscopies for the in situ study of glass objects of historic or/and artistic value, This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033, the CSIC General Foundation (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. M.O. thanks CSIC for a contract. The authors also thank M.A. Villegas and M. García Heras (Institute of History, CSIC) for fruitful discussions on historical glasses., There are 4 files which correspond to each technic employed for the analysis of the six different samples. The file title “LIBS” contains: LIBS_UG; LIBS_MAK; LIBS_MAR; LIBS_MTA; LIBS_MTB; LIBS_MTN. The file for “LIF” contains: LIF_UG; LIF_MAK; LIF_MAR; LIF_MTA; LIF_MTB; LIF_MTN. The file for “FT-RAMAN” contains: FT-RAMAN_UG; FT-RAMAN_MAK; FT-RAMAN_MAR; FT-RAMAN_MTA; FT-RAMAN_MTB; FT-RAMAN_MTN. For the “MPEF” there are two files inside. One title “MPEF safe limits” which contains the documents: MPEF_MAK_SL; MPEF_MAR_SL; MPEF_MTA_SL; MPEF_MTB_SL; MPEF_MTN_SL. And the other called “MPEF profiles” which contains: MPEF_MAK_PROFILE; MPEF_MAR_PROFILE; MPEF _MTA_PROFILE; MPEF _MTB_PROFILE; MPEF _MTN_PROFILE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Palomar, T.; Martínez-Weinbaum, Marina; Aparicio, Mario; Maestro-Guijarro, Laura; Castillejo, Marta; Oujja, M. 2022. Spectroscopic and Microscopic Characterization of Flashed Glasses from Stained Glass Windows. Appl. Sci. 12(11): 5760"

  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Aparicio, Mario
  • Maestro-Guijarro, Laura
  • Castillejo, Marta
  • Oujja, Mohamed
The study was undertaken in eleven flashed glass samples, provided by LambertsGlas® consisting of a colorless base glass covered by layers of different colors and thicknesses. This dataset consists of images of the samples; Laser-induced Breakdown Spectrocopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; Optical Microscopy (OM) images; UV-Vis-IR spectra and Field Emission Scanning Electron Microscopy (FESEM) images and the assingment of the Energy-dispersive X-ray (EDS) analysis. This information allows characterizing the composition of both sides of the glasses and determining the chemilcal identification of chromophores responsible for the flashed glass coloration. Images are presented in JPG. All spectra are presented in cvs format, in a single page. Descriptions of the samples and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. For LIBS, 1 file per sample of elemental composition of the flashed glasses are included. Each file is composed of 2 columns (wavelength and intensity). For LIF, 1 file per sample of the analysis of fluorescent species of each flashed glass are included. Each file is composed of 2 columns (wavelength and intensity). For UV-Vis-IR spectroscopy, 1 file per sample of glass chromophores, just for the colored side. Each file is composed of 2 columns (wavelength and intensity). For FESEM-EDS, 2 files per sample. In the first one: "PHOTOS", 1 cross section image per sample is included. In the second group of files: "EDS", 1 file per sample of the assignment of the main elements. Each file is composed of 3 columns (the main elements, the results of the glass base and the colored layer in weight percentage, respectively). -- This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Appl. Sci., 12(11), 5760 (2022) (https://www.mdpi.com/2076-3417/12/11/5760). Flashed glasses are composed of a base glass and a thin colored layer and have been used since medieval times in stained glass windows. Their study can be challenging because of their complex composition and multilayer structure. In the present work, a set of optical and spectroscopic techniques have been used for the characterization of a representative set of flashed glasses commonly used in the manufacture of stained glass windows. The structural and chemical composition of the pieces were investigated by optical microscopy, field emission scanning electron microscopy-energy dispersive X-ray spectrometry (FESEM-EDS), UV-Vis-IR spectroscopy, laser-induced breakdown spectroscopy (LIBS), and laser-induced fluorescence (LIF). Optical microscopy and FESEM-EDS allowed the determination of the thicknesses of the colored layers, while LIBS, EDS, UV-Vis-IR, and LIF spectroscopies served for elemental, molecular, and chromophores characterization of the base glasses and colored layers. Results obtained using the micro-invasive LIBS technique were compared with those retrieved by the cross-sectional technique FESEM-EDS, which requires sample taking, and showed significant consistency and agreement. In addition, LIBS results revealed the presence of additional elements in the composition of flashed glasses that could not be detected by FESEM-EDS. The combination of UV-Vis-IR and LIF results allowed precise chemical identification of chromophores responsible for the flashed glass coloration., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, the Fundación General CSIC (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034)., There are 5 files which correspond to each technic employed for the analysis of the eleven different samples. The file title "PHOTOS" contains: Fig. 1_Flashedglasses_Photo; Fig. 2_OM_Photo. The file title “LIBS” contains: LIBS_Black-Baseglass; LIBS_Black-Coloredlayer; LIBS_Blue1-Baseglass; LIBS_Blue1-Coloredlayer; LIBS_Blue2-Baseglass; LIBS_Blue2-Coloredlayer; LIBS_Blue3-Baseglass; LIBS_Blue3-Coloredlayer; LIBS_Brown1-Baseglass; LIBS_Brown1-Coloredlayer; LIBS_Brown2-Baseglass; LIBS_Brown2-Coloredlayer; LIBS_Green1-Baseglass; LIBS_Green1-Coloredlayer; LIBS_Green2-Baseglass; LIBS_Green2-Coloredlayer; LIBS_Green3-Baseglass; LIBS_Green3-Coloredlayer; LIBS_Pink1-Baseglass; LIBS_Pink1-Coloredlayer; LIBS_Pink2-Baseglass; LIBS_Pink2-Coloredlayer. The file for “LIF” contains: LIF_Black-Baseglass; LIF_Black-Coloredlayer; LIF_Blue1-Baseglass; LIF_Blue1-Coloredlayer; LIF_Blue2-Baseglass; LIF_Blue2-Coloredlayer; LIF_Blue3-Baseglass; LIF_Blue3-Coloredlayer; LIF_Brown1-Baseglass; LIF_Brown1-Coloredlayer; LIF_Brown2-Baseglass; LIF_Brown2-Coloredlayer; LIF_Green1-Baseglass; LIF_Green1-Coloredlayer; LIF_Green2-Baseglass; LIF_Green2-Coloredlayer; LIF_Green3-Baseglass; LIF_Green3-Coloredlayer; LIF_Pink1-Baseglass; LIF_Pink1-Coloredlayer; LIF_Pink2-Baseglass; LIF_Pink2-Coloredlayer. For the “FESEM-EDS” there are two files inside. One title "EDS" which contains the documents: EDS_Black; EDS_Blue1; EDS_Blue2; EDS_Blue3; EDS_Brown1; EDS_Brown2; EDS_Brown2; EDS_Green1; EDS_Green2; EDS_Green3; EDS_Pink1; EDS_Pink2. And the other called "PHOTOS" which contains: FESEM_Black; FESEM_Blue1; FESEM_Blue2; FESEM_Blue3; FESEM_Brown1; FESEM_Brown2; FESEM_Green1; FESEM_Green2; FESEM_Green3; FESEM_Pink1; FESEM_Pink2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Martínez-Weinbaum, M.; Lozano-Carbó, M.; Maestro-Guijarro, L.; Carmona-Quiroga, P.M.; Oujja, M.; Castillejo, M., Comparison of the Use of Traditional Solvents and Nanosecond 213 nm Nd:YAG Laser in Thinning Naturally Aged Varnish on a Contemporary Oil Easel Painting. Heritage. 2023, 6(2), 957-967.”

  • Martínez-Weinbaum, Marina
  • Lozano-Carbó, Miriam
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
The study was undertaken in a contemporary oil easel painting which was temporarily loaned from the Restoration-Conservation Laboratory of the Faculty of Fine Arts of the University of Barcelona. Different varnish removal procedures were assessed over this painting, and, in order to analyse and compare the efficiency of the methods, several non-invasive and invasive techniques were applied. This dataset consists of images of the artwork (general and detail) and the results of the different cleaning procedures; the varnish removal test conditions performed; Laser-induced Breakdown Spectroscopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; and Fourier-transform infrared spectroscopy (FTIR Spectroscopy). This information allows for assessing the results achieved with each cleaning methodology. Images are presented in JPG format. All spectra are presented in CSV format, on a single page. Descriptions of the selected areas and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. To illustrate the artwork, we took one image of the painting considered in the study (Fig. 1) and a general image under UV light of the picture (Fig. 2). Additionally, we can see the outcomes of varnish removal in the detail photos digital microscopy images (Fig. 3), and in detail UV light photograph of one of the cleaned areas (Fig. 4). For kinetic LIBS, 1 file per each uncleaned and cleaned by different methods area is included. Each file is composed of 41 columns, the first one (x) for wavelength and, the other 40 (y) for intensity. For LIF, 1 file per sample of the analysis of the fluorescence of each un/cleaned area. Each file is composed of 2 columns (wavelength and intensity). For FTIR, 1 file for the characterisation of the varnish, which is composed of 2 columns, the first one indicates the wavenumber (x), and the second one the transmittance (y)., [EN] The removal of aged varnish on artistic paintings is a delicate intervention and the use of UV laser for this purpose is of special relevance. In particular, the use of nanosecond-pulsed lasers operating at 213 nm has been noted to produce good results in mock-up samples, but it has not been tested in real artworks. In this paper, we report on the application of this procedure for the first time on a contemporary oil easel painting with naturally aged varnish. The obtained results were compared with those achieved using traditional solvents, specifically a mixture of ligroin:acetone. Additionally, hot water was used to remove surface dirt. The performance of the different cleaning procedures was assessed with a range of techniques, including low-power microscopy, UV lamp illumination, laser-induced fluorescence (LIF), and laser-induced breakdown spectroscopy (LIBS). Of the tested treatments, the best performance is obtained by nanosecond laser irradiation at 213 nm using an adequate laser fluence (typically 0.14 J/cm2) that allows controlled and efficient removal of the outermost aged varnish layer without affecting the underlying non-aged varnish and paint layers., This research was funded by the Spanish State Research Agency (AEI) through the project SCOCHLAS (Study and Conservation of Cultural Heritage with Lasers, PID2019-04124RBI00/AEI/1013039/501100011033), by the Community of Madrid through the project Top Heritage- CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372), and by the H2020 project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., There are 4 folders that correspond to each technic employed for the analysis of the cleaning procedures, and 1 for the cleaning conditions description. The folder titled "PHOTOS" contains: Fig. 1 Image of the picture. Selected cleaned areas; Fig. 2 UV light image of the artwork; Fig. 3 Digital microscopy of area 6 (before and after cleaning); Fig. 4 Fluorescence under UV lamp before and after cleaning. The folder titled “LIBS” contains: LIBS_withoutcleaning; LIBS_deionizedwater; LIBS_solventmixture; LIBS_213nm,0.10 Jcm2; LIBS_213nm,0.14 Jcm2. The folder for “LIF” contains: LIF_withoutcleaning; LIF_deionizedwater; LIF_solventmixture; LIF_213nm,0.10 Jcm2; LIF_213nm,0.14 Jcm2. The folder “FTIR” contains: FTIR_varnish. The folder "Cleaning conditions description" contains the file "Cleaning treatments"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

SERS activity of silver-based calcium silicate hydrate upon laser irradiation

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
C-S-H and C-S-Ag-H gel solutions were analysed by UV/Vis/NIR spectroscopy with a Shimadzu 3600 UV/Vis/NIR spectrometer equipped with 2H and Wlamps, a photomultiplier (UV/Vis), and a InGaAs and a PbS (NIR) detectors. The baseline reference sample was prepared with 1000 µL of MilliQ water. The samples were diluted 1:19 (50 μL of gel solution to 950 μL of of MilliQ water) and the measurements were recorded in the range of 190–850 nm, with slow scan speed. The sampling interval and the slit width were 0.5 nm and 1 nm, respectively. For the 29Si NMR analysis of dried C-S-H and C-S-Ag-H, a Bruker AV-400 (9.4 T and νR of 4 kHz) (Bruker, Germany) NMR spectrometer was used in the following conditions: pulse width of 7 μs and relaxation delay of 60 s with typically 3000 scans. The 29Si chemical shifts were determined relative to tetramethylsilane. The spectra were treated for band deconvolution into Gaussian peaks and fitted using Origin 2022 software. The micro-Raman spectra were carried out on pressed pellets of the samples with a Raman microscope Renishaw RM1000 (Renishaw, Wotton-under-Endge, UK) equipped with a Leica microscope and an electrically refrigerated CCD camera. Laser excitation line was provided by a He:Ne (633 nm wavelength, 25 mW output power with approximately 2 mW at the sample). The spectra were obtained using a 50× magnification objective, a spectral resolution of 4 cm−1, a 10 s exposure time, 5 accumulations, and 2mW laser power per spectra in the range of 2000–100 cm−1 in order to increase signal/noise ratio. The frequencies were calibrated with silicon at 520 cm−1. X-ray photoelectron (XP) and SERS spectra were taken on pressed C-S-Ag-H pellets before and after irradiation at 355 nm, and 532 nm (and of the reference C-S-H pellet). For the former technique, the analysis was performed under a base pressure lower than 7.5 · 10−9 Torr using a PHOIBOS-150 (Specs) electron analyzer, Mg Kα radiation and a constant pass energy of 100 eV and 20 eV for the wide and narrow scans, respectively. The pellets were fixed to the sample holder using double-sided conductive carbon tape to ensure a good conductivity and the X-ray gun was used at 100 W power in order to avoid any possible sample degradation induced by the X-ray irradiation. The binding energy scale was referenced to the main C 1s signal of the adventitious carbon contamination layer which was set at 284.8 eV. All the spectra were fitted using pseudo-Voigt lines (30 % Gaussian/70 % Lorentzian) and a Shirley-type background. For the SERS analysis, the same experimental conditions were used as for obtaining the Raman spectra using Rhodamine B as a probe molecule (an aliquot of 2 µl of a 5 × 10−6 M aqueous solution was dropped on the irradiated and on the non-irradiated silver-containing pellets). Additionally, different reference RhB spectra were acquired on hydroxylamine-reduced silver nanoparticles (NPs), 2 µl dropped on top of both C-S-H and C-S-Ag-H pellets for the comparison of the SERS activities. More details about samples preparation and irradiation conditions are available in Materials folder., Data life: 2024- (unlimited validity), This is the experimental dataset used in the paper Applied Surface Science, 662: 160107 (2024) (https://doi.org/10.1016/j.apsusc.2024.160107) in which a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement, was synthetized. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. This data set includes the results of the effect of silver on the gel structure via visible UV spectroscopy, micro-Raman and 29Si Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR). It also includes the characterization analyses of the C-S-Ag-H pellets by X-ray Photoelectron Spectroscopy (XPS) to determine the silver oxidation state and the assessment of their SERS activity before and after laser irradiation using for the latter Rhodamine B (RhB) as a probe., We acknowledge financial support from the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/501100011033; PID2020-113900RB-I00/AEI/10.13039/ 501100011033; and PID2022-137017OB-I00/AEI/10.13039/501100011033; from European Union’s Horizon 2020 through IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) project; and from the Community of Madrid through Maestro-Guijarro’s Youth Guarantee contract (CAM20_IQFR_AI_06)., Materials folder: “Sample_synthesis”; “Laser_irradiation_conditions” NMR folder: "NMR_readme"; "NMR_C-S-H"; "NMR_C-S-Ag-H" Raman folder: “Raman_readme"; "Raman_C-S-H"; "Raman_C-S-Ag-H"; "Raman_C-S-H_RhB"; "Raman_C-S-Ag-H_RhB" SERS folder: "SERS_readme"; "SERS_RhB_C-S-Ag-H_355"; "SERS_RhB_C-S-Ag-H_355_NPs"; "SERS_RhB_C-S-Ag-H_532"; "SERS_RhB_C-S-Ag-H_532_NPs"; "SERS_RhB_C-S-Ag-H_NPs"; "SERS_RhB_C-S-H_NPs" XPS folder: "XPS_readme"; "XPS_AgAuger_C-S-Ag-H_532"; "XPS_AgAuger_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H_532"; "XPS_Ag3d_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H"; "XPS_Ag3d_C-S-H"; "XPS_Ca2p_C-S-Ag-H_532"; "XPS_C1s_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_355"; "XPS_wide_C-S-Ag-H"; "XPS_wide_C-S-H" UV-Vis folder: "UV-VIS_readme"; "UV-VIS_C-S-H"; "UV-VIS_C-S-Ag-H", Peer reviewed