Pasar al contenido principal

CATALIZADORES BIFUNCIONALES BASADOS EN RESIDUOS AGROINDUSTRIALES PARA ELECTRODOS AVANZADOS PARA LA REDUCCION Y EVOLUCION DE OXIGENO

PID2020-115848RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons license CC-BY 4.0, Figure S 1. SEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 2.TEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 3. Particle size distribution of the various electrocatalyst: (a) CoFe2O4, (b) CoFe/NC10% , (c) CoFe/NC20% ,(d) CoFe/NC30% , and (e) CoFe/NC40% . Table S 1. Amount of CoFe alloys and oxides in the composite samples, determined from the XRD analysis. Figure S 4. XPS high resolution spectra of (a) Fe 2p, (b) Co 2p, for all electrocatalysts. Table S 2. XPS analysis results of the electrocatalysts. Table S 3. Elemental composition of the prepared electrocatalysts. Table S 4. Specific capacitance and ECSA values for the various eletrocataysts. Table S 5. Charge transfer resistance (Rct) and solution resistance (Rs) determined from EIS measurement. Figure S 5. ECSA-normalized polarization curve., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions [Dataset]

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Under a Creative Commons license BY 4.0 deed., Table S1. Raman shift (cm-1) of the G, D, D’ and D’’ from Raman spectra deconvolution and ID/IG intensity ratio. Table S2. Surface carbon, oxygen, nitrogen, cobalt and titanium contents and C/N, Co/N and Ti/N ratios calculated by XPS of the electrocatalysts and the relative content (%) of the deconvoluted peaks for N1s, Co2p and Ti2p. Figure S1. High-resolution C1s core level of NGC, Ti/NGC, Co/NGC and TiCo/NGC composites. Figure S2. LSV at 0.005 V s−1 in an O2-saturated 0.1 M NaOH solution, recorded using different electrode rotating rates indicated in the legend (rpm). (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S3. Koutecky−Levich diagrams obtained between 0.3 and 0.56 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S4. Koutecky−Levich diagrams obtained between 0.6 and 0.78 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction [Dataset]

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
6 figures, 2 tables.-- Under a Creative Commons license CC BY 4.0, https://creativecommons.org/licenses/by/4.0/, Figure S1. TEM images and diffraction patterns of copper, cuprite and graphite for Cu-150-NC. Figure S2. Raman Spectrum of Cu-X-NC (X= 0, 120, 150, 180). Figure S3. High resolution N1s spectra of Cu-X-NC (X= 0, 120, 150, 180). Figure S4. Nyquist plot from EIS experiments at 0.78 V vs RHE for the catalysts Cu-X-NC (X = 0, 120, 150 and 180). Figure S5. ORR polarization curves before and after accelerated stability test of catalysts Cu-0-NC, Cu-120-NC and Cu 180-NC. Figure S6. SEM images of Cu-150-NC (A) before and (B) after acceleration stability test. Table S1. Surface chemical composition (wt%) of the catalysts obtained by XPS. Table S2 Double Layer capacitance, Electrochemical Surface Area, Mass Activity and Specific Activity of the catalyst Cu-X-NC (X= 0, 120, 150 and 180) and after Accelerated stability test Cu-X-NC 10000 (X=0, 120, 150 and 180)., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license: https://creativecommons.org/licenses/by/4.0/, 1. Physicochemical characterization; Figure S1. (a)TEM image of NiP@CF, and (b,c)HAADF-EDX of NiP@CF; Figure S2. XPS survey spectra of the various samples; Figure S3. HER polarization curves comparison of NiP@CF sample at different thermal treatments; Figure S4. Cyclic voltammograms at different scan rates: (a) CF, (b) P@CF, (c)NiO@CF, (d)NiO@CF-T, and (e)NiP@CF; Figure S5. (a) SEM and (b )EDX of NiP@CF after stability measurements, Scanning electron microscopy (SEM-EDX) was conducted using an SEM Hitachi 3400N and an EDX Röntec XFlash of Si (Li). For detailed morphology observation, a high-resolution transmission electron microscope (TEM) (Tecnai F30) was utilized, operating at an accelerating voltage of 200 kV. X-ray diffraction (XRD) analyses were performed using a Bruker D8 Advance diffractometer with Cu Kα as the X-ray source, generating 1600 W. X-ray photoelectron spectra (XPS) were acquired using a VG Escalab 200R spectrometer equipped with a hemispherical electron analyzer. The XPS measurements employed Mg Kα (1253.6 eV) at 100 W with passing energy of 50 eV for the survey analysis and 20 eV for the high-resolution regions. The C 1s line at 284.6 eV was used for charge correction in all XPS spectra. Peak fitting and quantification were performed using CasaXPS software, and a Shirley-type background was applied to all peaks. A 70%/30% Gaussian/Lorentzian line shape was employed to deconvolute the high-resolution data for each component., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts [Dataset]

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license., Figure S1. Particle size distribution of Ni-based particles (from CNF growth catalyst) in the rGO-CNF1.0 nanocomposite; Figure S2. Pore size distribution curves obtained by applying BJH method to the desorption branches; Figure S3. XPS signals for Ta 4f for the different TaOx-based catalysts; Figure S4. XRD patterns for the TaOx catalysts supported on rGO-CNF composites as well as rGO and CNF (* line with multiple indexes). The dotted lines (shown only those at Bragg angles above 35º 2theta for the sake of clarity) indicate the position of different reflections and Miller indexes according to ICDD reference patterns (Na2Ta8O21 PDF#28-1137, Ta2O5 PDF#89-2843, TaO PDF#89-4772, Ni PDF#87-0712); Table S1. Lattice parameters from XRD patterns for the tantalum-related phases. The values written in bold correspond to the main component of the tantalum-based formulation., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed