Pasar al contenido principal

NANOREACTORES HIBRIDOS FOTOCATALITICOS Y DE INTERCAMBIO IONICO AUTOPROPULSADOS PARA PURIFICACION DEL AGUA

PID2021-124568NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes [Dataset]

  • Capone, F.
  • Muntada, Olga
  • Ramírez, Jéssica Casandra
  • Esplandiú, María J.
  • Dedryvère, R.
  • Grimaud, A.
  • Lassalle-Kaiser, B.
  • Céolin, D.
  • Perez Murano, Francesc X.
  • Rueff, J. P.
  • Fraxedas, J.
[Description of methods used for collection/generation of data] Data acquired with a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France) [Methods for processing the data] CasaXPS software., Original raw data (uncorrected energies) of HAXPES spectra obtained at the HAXPES endstation of the GALAXIES beamline at SOLEIL synchrotron facility (France). Each spectrum is displayed in a two-column format, kinetic energy (X) vs. HAXPES intensity (Y). Photon energies are indicated for each figure., [FIGURE 5] HAXPES raw data of the Au 4f region in kinetic energy (X) vs. intensity (Y) columns of a 40 nm Au film (au_film_40nm), a dispersion of Au nanoparticles on a 25 nm-thick membrane in air (au_np_cell16), a dispersion of Au nanoparticles in MilliQ water (au_np_cell17) and a Au film treated with oxygen plasma and measured with 1486.6 eV photons (au_film_O2_plasma, data from DOI: 10.1021/acs.accounts.8b00241). Photon energy = 5 keV., [FIGURE 6] HAXPES raw and normalized (norm) data of the (a) N 1s, (b) O 1s, (c) C 1s and (d) F 1s lines obtained with 7 keV photons and using 20 nm thick membranes. Liquid cells filled with: air (S2), vacuum (S4), with air and with a ca 5 nm-thick amorphous carbon coating deposited in the inner part of the membrane (S7) and with 60 ml of the LP57 electrolyte (1 M LiPF6 in EC:EMC 3:7) and with the ca 5 nm-thick carbon coating (S6). The formulas used for normalization (heights normalized to their corresponding maxima) are displayed in the corresponding Y columns. In Fig. 6(d) a least-squares fit using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half-maximum (FWHM) for all components is shown. Raw and corrected kinetic energies are given., [FIGURE 7] HAXPES raw data of the (a) Na 1s region of a 3.5 M NaCl aqueous solution and (b) Cs 3d and (c) Cs 4d lines of a 2.6 M aqueous solution of CsCl obtained with 7 keV photons and using 15 nm membranes., [FIGURE S1] (Top) simulation of the inelastic mean free path (nm) as a function of the kinetic energy in silicon nitride using the TPP-2M model and assuming a 3.44 gr cm-3 density for silicon nitride. (Bottom) Simulated HAXPES spectra assuming a 15 nm thick silicon nitride layer on a CsCl substrate in the 3-10 keV photon energy range., European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. Support through the Marıa de Maeztu grant CEX2023-001397-M funded by MICIU/AEI is acknowledged. Generalitat de Catalunya through the 2021-SGR-00644 project. European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_5.xls; Fig_6a.xls, Fig_6b.xls, Fig_6c.xls, Fig_6d.xls, Fig_7.xls, Fig_S1.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Lowering the activation temperature of Ti-Zr-V non-evaporable getter films by removing surface carbon contamination: an in situ XPS study

  • Fraxedas, J.
  • Sauthier, Guillaume
  • Tran, L.
  • Carlino, Vincent
FIGURE 1: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing and in situ oxygen plasma treatment (50 W for 15 min) and annealing at four different temperatures: 100 °C, 130 °C, 150 °C and 200 °C. FIGURE 2: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of an as-received sample, after an in situ argon (80%)/oxygen (20%) plasma treatment (60 W for 2h) and after an annealing at 150 °C overnight. FIGURE 3: XPS raw data of the O1s-V2p lines corresponding to different sequential plasma and annealing cycles performed at 150 °C overnight in all cases. FIGURE 4: Normalized O1s area ratio as a function of annealing at 100, 130, 150 and 200 °C, respectively. FIGURE 5: XPS raw spectra corresponding to the O1s core level of Ti-Zr-V films undergoing plasma and 150 °C annealing cycles: (a) 50 W oxygen plasma for 15 min and (b) 60 W argon/oxygen plasma for 2 h. The intensity of the spectra corresponding after annealing have been multiplied by a factor of two. FIGURE 6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of a sample exposed to argon (80%)/oxygen (20%) plasma (60 W for 2 h) after an annealing at 150 °C overnight and the same sample stored in UHV (≈ 1×10-9 mbar) for 5 days. Spectra have been normalized to their maxima. FIGURE 7: XPS raw data of the Si2p lines corresponding to as-received samples and after different plasma treatments: oxygen plasma (50 W, 15 min), argon/oxygen (50 W, 2 h) and (60 W, 2 h). FIGURE S2: Experimental and simulated (using SESSA software) survey XPS spectra. FIGURE S3: XPS raw data of the C1s core level of an as-received Ti-Zr-V film, after an exposure to a first 50W oxygen plasma cycle for 15 min, after an overnight annealing at 150 °C and after a subsequent second 50W oxygen plasma cycle for 15 min. FIGURE S4: XPS raw data of the C1s core level of an as-received sample with the corresponding least-squares fits using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half maximum (FWHM) for all components. FIGURE S5: XPS raw data of the N1s core level of an as-received sample, after exposure to an argon/oxygen plasma (80%-20%) at 60 W for 2 and after annealing overnight at 150 °C. FIGURE S6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing at 130 °C for 24 h, oxygen plasma treatment (50 W for 15 min), annealing al 200 °C for 1 h and exposure at a base pressure of ≈ 5 × 10-7 mbar for 16 h., [Description of methods used for collection/generation of data] Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra., [Methods for processing the data] CasaXPS software version 2.3.16 PR 1.6., Original raw data of XPS spectra obtained in ORIGIN format. Columns (X) correspond to binding energies and columns Y to XPS intensity (Y). The different plasma and annealing conditions are indicated in the corresponding columns (“in Comments”). Labels in “Long name” files correspond to the original CasaXPS files names. Photon energy is 1486.6 eV., - Spanish Ministry of Science and Innovation (MCIN) under Contract Nos. PGC2018-095032-B-100 and PID2021-124568NB-I00. - The ICN2 is funded by the CERCA program/Generalitat de Catalunya. - The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., ile List: figure_01.opju; figure_02.opju; figure_03.opju; figure_04.opju; figure_05.opju; figure_06.opju; figure_07.opju; figure_S2.opju, figure_S3.opju, figure_S4.opju, figure_S5.opju, figure_S6.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Determining the intrinsic electronic structure of radiation-sensitive surfaces with X-ray photoemission spectroscopy: Nafion films as a case study

  • Fraxedas, J.
  • Esplandiú, María J.
  • Muntada, Olga
  • Perez Murano, Francesc X.
  • Céolin, D.
  • Rueff, J. P.
[Description of methods used for collection/generation of data] Data acquired with a PHI-Genesis system from ULVAC-PHI located at ICN2 and a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France)., [Methods for processing the data] CasaXPS software version CasaXPS - 2.3.27 PR5.6, Determining the intrinsic electronic structure of radiation-sensitive polymer surfaces with X-ray photoelectron spectroscopy (XPS) requires careful optimization. Prior to any consistent characterization, evaluating radiation-induced damage is mandatory to establish the optimal operating parameters for the specific XPS instrument. In this work, we present a systematic methodology to address this challenge using Nafion, a widely utilized polymer containing highly radiation-sensitive sulfonate groups. Specifically, we focus on the capacity of Nafion thin films to efficiently capture divalent metal cations, such as Cd2+ and Pb2+, which are common toxic contaminants in drinking water. Given that Nafion films offer promising potential for rapid water purification and environmental remediation, a detailed analysis is essential to elucidate the ion-exchange mechanisms operating at the Nafion/water interface., - European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. - Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. - The ICN2 is funded by the CERCA program/Generalitat de Catalunya. - The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. - María de Maeztu grant CEX2023-001397-M financed by MICIU/AEI/10.13039/501100011033. - Generalitat de Catalunya through the 2021-SGR-00644 project., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_03a.opju; Fig_03b.opju; Fig_04a.opju; Fig_04b.opju; Fig_04c.opju; Fig_05a.opju; Fig_05b.opju; Fig_05c.opju; Fig_06.opju; Fig_07a.opju; Fig_07b.opju; Fig_S02.opju; Fig_S03.opju; Fig_S04.opju; Fig_S05.opju; Fig_S06.opju; Fig_S07.opju; Fig_S08.opju, Peer reviewed