Pasar al contenido principal

EXPLORANDO NUEVOS MECANISMOS DE MOVIMIENTO AUTOSOSTENIDO Y COMPORTAMIENTO COLECTIVO DE SUPERFICIES ACTIVAS EN LA NANOESCALA

PGC2018-095032-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exciton tuning and strain imaging in WS2supported on PDMS micropillars

  • Sledzinska, Marianna
  • Xiao, Peng
  • Puig Vilardell, E.
  • Chávez-Angel, Emigdio
  • Esplandiú, María J.
  • Sotomayor Torres, C. M.
Since the raise of 2D materials, significant research has been dedicated to their strain-dependent electronic and mechanical properties. In this work, we studied exciton energies and low-frequency phonon modes in CVD-grown mono- and few-layer WS2 transferred on PDMS micropillars. The modification of the band structure under strain was investigated by photoluminescence (PL) spectroscopy at room temperature. Machine learning (ML) methods were used to analyze the PL spatial maps and facilitate the spectral deconvolution. For monolayer (1L) WS2, red shift in the exciton energy was detected as a function of the position, which was ascribed to the presence of residual strain. For three-layer (3L) strained WS2, a significant increase in the PL intensity corresponding to direct (K-K) band transition together with a change of exciton energy was observed. From the PL spectra, strain distribution maps were extracted for both studied samples, which strongly resembled the ML clustering results. Finally, the low-frequency Raman modes of WS2 were studied on both Si/SiO2 and PDMS substrates and no significant change of their frequency was observed for the 3L-WS2., This work has been supported by the Severo Ochoa Program (No. SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033), by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos. PGC2018-095032-B-I00 and PID2021-124568NB-I00, and by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the European Union's H2020 FET Proactive Project TOCHA (Grant No. 824140) and the ERC-AdG Project LEIT (Grant No. 885689).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Passivation of Bi2Te3 Topological Insulator by Transferred CVD-Graphene: Toward Intermixing-Free Interfaces

  • Galceran, Regina
  • Bonell, Fréderic
  • Camosi, Lorenzo
  • Sauthier, Guillaume
  • Gebeyehu, Zewdu M.
  • Esplandiú, María J.
  • Arrighi, Aloïs
  • Fernández Aguirre, Iván
  • Figueroa, Adriana I.
  • Sierra, Juan F.
  • Valenzuela, Sergio O.
The investigation, and ultimate application, of topological insulators, typically involve exposure to ambient conditions or their integration with metals, which lead to surface oxidation or material intermixing. X-ray photoelectron spectroscopy (XPS) measurements that demonstrate passivated and intermixing-free interfaces in the topological insulator BiTe by means of dry-transferred CVD graphene are reported. After air exposure, no traces of BiTe oxidation are found. Furthermore, it is demonstrated that graphene acts as a very efficient metal and chalcogen diffusion barrier in BiTe/graphene/permalloy (Py) heterostructures, which are relevant for spintronics. Such results are in stark contrast with the significant surface degradation observed in bare BiTe under ambient conditions and the deep Bi-Te bonding disruption that occurs in BiTe/Py heterostructures. These findings provide a new approach to control and engineer topological insulator interfaces for spintronic applications and a new platform to investigate the combined use of graphene and topological insulator Dirac states., The authors acknowledge the support of the Spanish Research Agency (AEI), Ministry of Science and Innovation (MCIN) under contract no. PID2019-111773RB-I00/AEI/10.13039/501100011033, PGC2018-095032-B-100, and SEV-2017-0706 Severo Ochoa, and by PCI2021-122035-2A funded by MICIN and by the European Union Next Generation EU/PRTR, and of the European Union's Horizon 2020 under grant agreement 881603 (Graphene Flagship). R.G. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 840588 (GRISOTO) and I.F.A from a fellowship from la Caixa Foundation (ID 100010434) with code LCF/BQ/DI18/11660030 and of H2020 Marie Skłodowska-Curie grant agreement No. 713673. J.F.S acknowledges support from MINECO under contract RYC2019-028368-I/AEI/10.13039/50110001103.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Tumor Eradication at Ultralow Drug Concentration via Externally Controlled and Boosted Metallic Iron Magnetoplasmonic Nanocapsules

  • Fluksman, Arnon
  • Lafuente, Aritz
  • Li, Zhi
  • Sort, Jordi
  • Lope-Piedrafita, Silvia
  • Esplandiú, María J.
  • Nogués, Josep
  • Roca, Alejandro G.
  • Benny, Ofra
  • Sepúlveda, Borja
With the aim to locally enhance the efficacy of cancer nanotherapies, here we present metal iron based magnetoplasmonic drug-loaded nanocapsules (MAPSULES), merging powerful external magnetic concentration in the tumor and efficient photothermal actuation to locally boost the drug therapeutic action at ultralow drug concentrations. The MAPSULES are composed of paclitaxel-loaded polylactic-co-glycolic acid (PLGA) nanoparticles partially coated by a nanodome shape iron/silica semishell. The iron semishell has been designed to present a ferromagnetic vortex for incorporating a large quantity of ferromagnetic material while maintaining high colloidal stability. The large iron semishell provides very strong magnetic manipulation via magnetophoretic forces, enabling over 10-fold higher trapping efficiency in microfluidic channels than typical superparamagnetic iron oxide nanoparticles. Moreover, the iron semishell exhibits highly damped plasmonic behavior, yielding intense broadband absorbance in the near-infrared biological windows and photothermal efficiency similar to the best plasmonic nanoheaters. The in vivo therapeutic assays in a mouse xenograft tumor model show a high amplification of the therapeutic effects by combining magnetic concentration and photothermal actuation in the tumor, leading to a complete eradication of the tumors at ultralow nanoparticle and drug concentration (equivalent to only 1 mg/kg PLGA nanoparticles containing 8 μg/kg of paclitaxel, i.e., 100-500-fold lower than the therapeutic window of the free and PLGA encapsulated drug and 13-3000-fold lower than current nanotherapies combining paclitaxel and light actuation). These results highlight the strength of this externally controlled and amplified therapeutic approach, which could be applied to locally boost a wide variety of drugs for different diseases., This work was financially supported by the European Research Council (ERC-StG) under the European union’s horizon 2020 research and innovation program, ERC proof of concept grant (ERC-2022-PoC1). We acknowledge financial support from grants No MAT2016-77391-R, PID2019-106229RB-I00,PID2020-116844RB-C21,PGC2018-095032-B-100, PCIN2016-093 (M-ERA-NET), RTI2018-095495-J-I00, and RYC2019-027449-I funded by MCIN/AEI/10.13039/501100011033. We thank the Ramon Areces foundation through grant CIVP19A5922. The funding from Generalitat de Catalunya through the 2017-SGR-292 project is also acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the SEV-2017-0706 grant funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time microscopy of the relaxation of a glass

  • Ruiz-Ruiz, Marta
  • Vila-Costa, Ana
  • Bar, Tapas
  • Rodríguez-Tinoco, Cristian
  • González-Silveira, Marta
  • Plaza, José Antonio
  • Alcalá, Jorge
  • Fraxedas, J.
  • Rodríguez-Viejo, Javier
The understanding of the dynamics of a glass above its devitrification temperature remains incomplete. Here, we build a spatio-temporal map of the relaxation dynamics of a highly stable glass into its supercooled liquid using real-time atomic force microscopy imaging. This methodology enables direct visualization of the progression of the liquid phase and clarifies and quantifies the presence of localized fast mobility regions separated by giant length scales. Our data establish a clear correlation between dynamic length and time scales in glasses. This approach may also be applicable to unveil the microscopic structure and dynamics of other glass-forming systems with much shorter length and time scales, including liquid-cooled glasses., Grant nos. PID2020-117409RB-I00 (J.R.-V., C.R.-T. and M.G.-S.), PGC2018-095032-B-100 (J.F.), PID2020-115663GB-C3 (J.A.P.) and PID2019-106744GB-I00 (J.A.), funded by MCIN/AEI/10.13039/501100011033. Project 2021SGR-00644 funded by AGAUR. C.R.-T. is a Serra Hunter Fellow. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant no. CEX2021-001214-S, funded by grant no. MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe/Au galvanic nanocells to generate self-sustained Fenton reactions without additives at neutral pH

  • Shahnazarova, Gubakhanim
  • Al Hoda Al Bast, Nour
  • Ramírez, Jéssica Casandra
  • Nogués, Josep
  • Esteve, Jaume
  • Fraxedas, J.
  • Serrà, Albert
  • Esplandiú, María J.
  • Sepúlveda, Borja
The generation of reactive oxygen species (ROS) via the Fenton reaction has received significant attention for widespread applications. This reaction can be triggered by zero-valent metal nanoparticles by converting externally added H2O2 into hydroxyl radicals (˙OH) in acidic media. To avoid the addition of external additives or energy supply, developing self-sustained catalytic systems enabling onsite production of H2O2 at a neutral pH is crucial. Here, we present novel galvanic nanocells (GNCs) based on metallic Fe/Au bilayers on arrays of nanoporous silica nanostructures for the generation of self-sustained Fenton reactions. These GNCs exploit the large electrochemical potential difference between the Fe and Au layers to enable direct H2O2 production and efficient release of Fe2+ in water at neutral pH, thereby triggering the Fenton reaction. Additionally, the GNCs promote Fe2+/Fe3+ circulation and minimize side reactions that passivate the iron surface to enhance their reactivity. The capability to directly trigger the Fenton reaction in water at pH 7 is demonstrated by the fast degradation and mineralization of organic pollutants, by using tiny amounts of catalyst. The self-generated H2O2 and its transformation into ˙OH in a neutral environment provide a promising route not only in environmental remediation but also to produce therapeutic ROS and address the limitations of Fenton catalytic nanostructures., G. Shahnazarova would like to acknowledge the PREBIST project, which has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 754558. We acknowledge funding from Generalitat de Catalunya through the 2021-SGR-00651 project. We acknowledge the financial support from the Spanish de Ciencia e Innòvacion (MCIIN) through the projects PGC2018-095032-B-100, PID2019-106229RB-100 and PID2021-124568NB-I00 funded by MCIN/AEI/10.13039/501100011033. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the CEX2021-001214-S grant funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Lowering the activation temperature of Ti-Zr-V non-evaporable getter films by removing surface carbon contamination: an in situ XPS study

  • Fraxedas, J.
  • Sauthier, Guillaume
  • Tran, L.
  • Carlino, Vincent
FIGURE 1: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing and in situ oxygen plasma treatment (50 W for 15 min) and annealing at four different temperatures: 100 °C, 130 °C, 150 °C and 200 °C. FIGURE 2: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of an as-received sample, after an in situ argon (80%)/oxygen (20%) plasma treatment (60 W for 2h) and after an annealing at 150 °C overnight. FIGURE 3: XPS raw data of the O1s-V2p lines corresponding to different sequential plasma and annealing cycles performed at 150 °C overnight in all cases. FIGURE 4: Normalized O1s area ratio as a function of annealing at 100, 130, 150 and 200 °C, respectively. FIGURE 5: XPS raw spectra corresponding to the O1s core level of Ti-Zr-V films undergoing plasma and 150 °C annealing cycles: (a) 50 W oxygen plasma for 15 min and (b) 60 W argon/oxygen plasma for 2 h. The intensity of the spectra corresponding after annealing have been multiplied by a factor of two. FIGURE 6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of a sample exposed to argon (80%)/oxygen (20%) plasma (60 W for 2 h) after an annealing at 150 °C overnight and the same sample stored in UHV (≈ 1×10-9 mbar) for 5 days. Spectra have been normalized to their maxima. FIGURE 7: XPS raw data of the Si2p lines corresponding to as-received samples and after different plasma treatments: oxygen plasma (50 W, 15 min), argon/oxygen (50 W, 2 h) and (60 W, 2 h). FIGURE S2: Experimental and simulated (using SESSA software) survey XPS spectra. FIGURE S3: XPS raw data of the C1s core level of an as-received Ti-Zr-V film, after an exposure to a first 50W oxygen plasma cycle for 15 min, after an overnight annealing at 150 °C and after a subsequent second 50W oxygen plasma cycle for 15 min. FIGURE S4: XPS raw data of the C1s core level of an as-received sample with the corresponding least-squares fits using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half maximum (FWHM) for all components. FIGURE S5: XPS raw data of the N1s core level of an as-received sample, after exposure to an argon/oxygen plasma (80%-20%) at 60 W for 2 and after annealing overnight at 150 °C. FIGURE S6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing at 130 °C for 24 h, oxygen plasma treatment (50 W for 15 min), annealing al 200 °C for 1 h and exposure at a base pressure of ≈ 5 × 10-7 mbar for 16 h., [Description of methods used for collection/generation of data] Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra., [Methods for processing the data] CasaXPS software version 2.3.16 PR 1.6., Original raw data of XPS spectra obtained in ORIGIN format. Columns (X) correspond to binding energies and columns Y to XPS intensity (Y). The different plasma and annealing conditions are indicated in the corresponding columns (“in Comments”). Labels in “Long name” files correspond to the original CasaXPS files names. Photon energy is 1486.6 eV., - Spanish Ministry of Science and Innovation (MCIN) under Contract Nos. PGC2018-095032-B-100 and PID2021-124568NB-I00. - The ICN2 is funded by the CERCA program/Generalitat de Catalunya. - The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., ile List: figure_01.opju; figure_02.opju; figure_03.opju; figure_04.opju; figure_05.opju; figure_06.opju; figure_07.opju; figure_S2.opju, figure_S3.opju, figure_S4.opju, figure_S5.opju, figure_S6.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lowering the activation temperature of Ti-Zr-V non-evaporable getter films by removing surface carbon contamination: An in situ XPS study

  • Fraxedas, J.
  • Sauthier, Guillaume
  • Tran, L.
  • Carlino, Vincent
Distributed pumping on the inner walls of ultrahigh vacuum (UHV) chambers using thin films of non-evaporable (NEG) getters has shown its large potentialities in particle accelerators in terms of pumping speed, ultimate pressures, outgassing/degassing rates and low secondary electron yields. The successful ternary combination of titanium, vanadium and zirconium provides large pumping speeds for 1–2 μm thick films with activation temperatures of 180 °C. However, for several UHV systems this temperature is still too high for the delicate instrumentation they host such as optics in beamlines of synchrotron radiation and free-electron lasers facilities. Thus, the quest for lower activation temperatures continues to be an important objective in the particle accelerators and storage rings community. In this study, we show that the removal of surface carbon contamination in Ti-Zr-V NEG films can decrease the activation temperature down to 150 °C, thus approaching the bakeout temperatures that the delicate instrumentation can withstand. Carbon removal is achieved by means of in situ low-pressure inductively-coupled downstream RF plasma and the evidence of surface cleaning and activation is assessed by monitoring the reduction of surfaces oxides with in situ X-ray photoemission spectroscopy (XPS). We present experimental conditions under which the films become virtually fully activated and test the effect of the plasma on silicon wafers emulating surfaces used in X-ray optics., This project has received funding from the Spanish Ministry of Science and Innovation (MCIN) under Contract Nos. PGC2018-095032-B-100 and PID2021-124568NB-I00. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exciton tuning and strain imaging in WS2supported on PDMS micropillars

  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Xiao, Peng|||0000-0002-4711-2566
  • Puig Vilardell, E.
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Since the raise of 2D materials, significant research has been dedicated to their strain-dependent electronic and mechanical properties. In this work, we studied exciton energies and low-frequency phonon modes in CVD-grown mono- and few-layer WS2 transferred on PDMS micropillars. The modification of the band structure under strain was investigated by photoluminescence (PL) spectroscopy at room temperature. Machine learning (ML) methods were used to analyze the PL spatial maps and facilitate the spectral deconvolution. For monolayer (1L) WS2, red shift in the exciton energy was detected as a function of the position, which was ascribed to the presence of residual strain. For three-layer (3L) strained WS2, a significant increase in the PL intensity corresponding to direct (K-K) band transition together with a change of exciton energy was observed. From the PL spectra, strain distribution maps were extracted for both studied samples, which strongly resembled the ML clustering results. Finally, the low-frequency Raman modes of WS2 were studied on both Si/SiO2 and PDMS substrates and no significant change of their frequency was observed for the 3L-WS2.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In situ XPS analysis of the electronic structure of silicon and titanium thin films exposed to low-pressure inductively-coupled RF plasma

  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Schütte, Max
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Tallarida, Massimo
  • Ferrer, Salvador
  • Carlino, Vincent
  • Pellegrin, Eric|||0000-0002-1648-0331
Carbon contamination of synchrotron and free-electron lasers beamline optics continues to be a major nuisance due to the interaction of the intense photon beams with the surfaces of the optical elements in the presence of residual gases even in ultrahigh vacuum (UHV) conditions. Among the available in situ cleaning strategies, low-pressure radio frequency (RF) plasma treatment has emerged as a useful and relatively simple approach to remove such carbon contamination. However, the irreversible damage that the plasma may induce in such critical surfaces has to be carefully characterized before its general application. In this study, we focus on reducing the amount of carbon from UHV chamber inside surfaces via silicon and titanium coatings using a low-pressure inductively-coupled downstream plasma source and we characterize the surface alterations by in situ X-ray photoemission spectroscopy (XPS). The in situ mirror cleaning is simulated by means of silicon wafers. We observe upward band bending, which translates into lower binding energies of the photoemission lines, that we attribute to the generation of vacancies and trapped charges in the oxide layers.