Pasar al contenido principal

BIO-FUNCIONALIZACION DE CHIPS EN SUSPENSION INNOVADORES PARA ESTUDIOS QUIMICOS, BIOELECTRONICOS Y MECANICOS EN CELULAS VIVAS

PID2020-115663GB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular Hydrogels Consisting of Nanofibers Increase the Bioavailability of Curcuminoids in Inflammatory Skin Diseases

  • Limón, David
  • Gil Lianes, Pablo
  • Rodríguez Cid, Laura
  • Alvarado, Helen-Lissette
  • Díaz Garrido, Natalia
  • Mallandrich, Mireia
  • Baldomà, Laura
  • Calpena-Campmany, Ana Cristina
  • Domingo Pascual, M. Concepción
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
The low bioavailability of curcuminoids (CCMoids) limits their use in the treatment of inflammatory skin diseases. Our work shows that this constraint can be overcome upon their incorporation into supramolecular hydrogels assembled from a gemini-imidazolium amphiphilic gelator. Three structural CCMoid analogues were used to prepare supramolecular hydrogels, and it was observed that the concentration of both the gelator and CCMoid and the proportion of solvents influence the self-assembly process. Moreover, the mechanical properties of the nanostructured gels were studied to find the optimum gels, which were then further characterized microscopically, and their ability to release the CCMoid was evaluated. The physicochemical properties of the CCMoids play a fundamental role in the interaction with the gelator, influencing not only the gelation but also the morphology at the microscopic level, the mechanical properties, and the biopharmaceutical behavior such as the amount of CCMoid released from the gels. The nanostructured supramolecular hydrogels, which contain the CCMoids at much lower concentrations (μg/mL) in comparison to other products, promote the penetration of the CCMoids within the skin, but not their transdermal permeation, thus preventing any possible systemic effects and representing a safer option for topical administration. As a result, the CCMoid-containing hydrogels can effectively reduce skin inflammation in vivo, proving that these supramolecular systems are excellent alternatives in the treatment of inflammatory skin diseases., This work was supported by the projects PID2020-115663GB-C3-2, PID2019-108794GB-I00, and PID2020–115631GB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. We thank AGAUR for a grant to consolidated research groups 2017SGR1277. A.G.-C. and N.A.-A. acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE) (2020-2023). A.G.-C. also acknowledges a Ramon y Cajal Grant (RYC-2017-22910)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Activation of Peroxymonosulfate for Tetracycline Degradation Using CoNi-Based Electrodeposited Films

  • Gómez, Elvira
  • Fons, Arnau
  • Cestaro, Roberto
  • Serrà, Albert
Synthesizing efficient heterogeneous catalysts with multiple active sites able to activate peroxymonosulfate (PMS) for the degradation of persistent organic pollutants continues to be a challenge for societies worldwide. In response, cost-effective, eco-friendly oxidized Ni-rich and Co-rich CoNi micro-nanostructured films were fabricated following a two-step process based on simple electrodeposition using green deep eutectic solvent as an electrochemical media and thermal annealing. The CoNi-based catalysts demonstrated exceptional efficiency in the heterogeneous catalyzed activation of PMS for tetracycline degradation and mineralization. The effects of the catalysts’ chemical nature and morphology, the pH, the concentration of PMS, irradiation with visible light, and the duration of contact with the catalysts on the degradation and mineralization of tetracycline were also studied. In dark conditions, oxidized Co-rich CoNi degraded more than 99% of tetracyclines in only 30 min and mineralized more than 99% of them in only 60 min. Moreover, the degradation kinetics doubled from 0.173 min−1 in dark conditions to 0.388 min−1 under visible light irradiation. In addition, the material demonstrated excellent reusability and can be easily recovered with simple heat treatment. Given those findings, our work provides new strategies for constructing high-efficiency and cost-effective PMS catalysts and elucidating the effects of operational parameters and primary reactive species formed by the catalyst–PMS system on water treatment technologies., This research was funded by Grant PID2020-115663GB-C32 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic Permeation and Anti-Inflammatory Evaluation of Curcumin, Bisdemethoxycurcumin and Bisdemethylcurcumin by a Validated HPLC-UV Method

  • Alvarado, Helen-Lissette
  • Limón, David
  • Calpena-Campmany, Ana Cristina
  • Mallandrich, Mireia
  • Rodríguez Cid, Laura
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
Curcumin shows anti-inflammatory activity, and it has been widely investigated for neurodegenerative diseases, adjuvant treatment in AIDS and antitumor activity against different tumors, among other activities. The goal of this work was to evaluate the capacity of curcumin and its derivatives (bisdemethoxycurcumin and bisdemethylcurcumin) in preventing the irritant effects of topically applied xylol and to assess the intrinsic capacity of curcuminoids in permeating human skin by ex vivo permeation tests. Its secondary goal was to validate an HPLC method to simultaneously determine the curcuminoids in the samples from the ex vivo permeation studies and drug extraction from the skin. Curcuminoid quantification was performed using an RP-C18 column, at isocratic conditions of elution and a detection wavelength of 265 nm. The method was specific with a suitable peak resolution, as well as linear, precise, and accurate in the range of 0.195–3.125 μg/mL for the three curcuminoids. Bisdemethylcurcumin showed the greatest permeation through the human skin, and it was the curcuminoid that was most retained within the human skin. The anti-inflammatory activity of the curcuminoids was evaluated in vivo using a xylol-induced inflammation model in rats. Histological studies were performed to observe any changes in morphology at the microscopic level, and these three curcuminoids were found to be respectful within the skin structure. These results show that these three curcuminoids are suitable for anti-inflammatory formulations for dermal applications, and they can be properly quantified using HPLC-UV., This research was funded by AGAUR, grant number 2017SGR1277. This work was supported by the projects PID2020-115663GB-C3-2, PID2019-108794GB-I00 and PID2020–115631GB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. AGC and NAA thank the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE) (2020-2023). AGC also thanks for the Ramon y Cajal Grant (RYC-2017-22910). The authors also thank Universitat de Barcelona for the financial support for the Open Access publication., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular and base-induced singlet oxygen generation enhancement of a water-soluble phthalocyanine

  • Smith, Shaun M.
  • Abelha, Thais F.
  • Limón, David
  • Samperi, Mario
  • Sharma, Bunty
  • Plaetzer, Kristjan
  • Dumoulin, Fabienne
  • Amabilino, David B.
  • Pérez García, Lluïsa
Investigation into the reactive oxygen species (ROS) generating abilities of photosensitizers outside of in-vitro/vivo conditions is a crucial element in the wider study of photodynamic therapy (PDT) in clinical settings. Zinc(II) phthalocyanine tetrasulfonic acid (ZnPcTS) is a water-soluble photosensitizer that can generate ROS as singlet oxygen (SO) under irradiation in the red and far-red region of the electromagnetic spectrum. The incorporation of ZnPcTS into nano-fibers of a bis-imidazolium hydrogel was demonstrated and the material was characterized with photophysical, rheological, and microscopy techniques. This supramolecular material containing ZnPcTS (named ZnPcTS_nEqBase@Gels) was found to significantly enhance the SO generation rate with respect to that of ZnPcTS in an aqueous solution. The effect is attributed mainly to reduced aggregation within the gel microenvironment compared with a solution. Furthermore, the preparation of ZnPcTS_nEqBase@Gels was carried out in the presence of varying amounts (0, 1, 2, 3, 4 eq.) of NaOH to improve the dissolution of ZnPcTSby ensuring full deprotonation of the sulfonate. The gel material containing 4 equivalents of NaOH per phthalocyanine was found to have a significantly greater SO-generating ability than the corresponding material containing no base. This phenomenon was shown to be partially a consequence of reduced aggregation as observed in the spectroscopic characterization. The enhancement in SO generation induced by this type of hybrid material makes it an attractive candidate to be used in different applications when efficient SO production is required., Project PID2020-115663GB-C32 was funded by MCIN/AEI. SMS thanks the University of Nottingham through the Beacon of Excellence Propulsion Futures and the EPSRC through the LDMI DTP for funding. We thank AGAUR (Generalitat de Catalunya) for grant 2021 SGR 01085, DBA thanks the Ministerio de Ciencia e Innovacion for funding through project PID2021-123873NB-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time microscopy of the relaxation of a glass

  • Ruiz-Ruiz, Marta
  • Vila-Costa, Ana
  • Bar, Tapas
  • Rodríguez-Tinoco, Cristian
  • González-Silveira, Marta
  • Plaza, José Antonio
  • Alcalá, Jorge
  • Fraxedas, J.
  • Rodríguez-Viejo, Javier
The understanding of the dynamics of a glass above its devitrification temperature remains incomplete. Here, we build a spatio-temporal map of the relaxation dynamics of a highly stable glass into its supercooled liquid using real-time atomic force microscopy imaging. This methodology enables direct visualization of the progression of the liquid phase and clarifies and quantifies the presence of localized fast mobility regions separated by giant length scales. Our data establish a clear correlation between dynamic length and time scales in glasses. This approach may also be applicable to unveil the microscopic structure and dynamics of other glass-forming systems with much shorter length and time scales, including liquid-cooled glasses., Grant nos. PID2020-117409RB-I00 (J.R.-V., C.R.-T. and M.G.-S.), PGC2018-095032-B-100 (J.F.), PID2020-115663GB-C3 (J.A.P.) and PID2019-106744GB-I00 (J.A.), funded by MCIN/AEI/10.13039/501100011033. Project 2021SGR-00644 funded by AGAUR. C.R.-T. is a Serra Hunter Fellow. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant no. CEX2021-001214-S, funded by grant no. MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Surface Quantification of Multifunctionalized Gold Nanoparticles Using UV-Visible Absorption Spectroscopy Deconvolution

  • Potts, Jordan C.
  • Jain, Akhil
  • Amabilino, David B.
  • Rawson, Frankie J.
  • Pérez García, Lluïsa
Multifunctional gold nanoparticles (AuNPs) are of great interest, owing to their vast potential for use in many areas including sensing, imaging, delivery, and medicine. A key factor in determining the biological activity of multifunctional AuNPs is the quantification of surface conjugated molecules. There has been a lack of accurate methods to determine this for multifunctionalized AuNPs. We address this limitation by using a new method based on the deconvolution and Levenberg-Marquardt algorithm fitting of UV-visible absorption spectrum to calculate the precise concentration and number of cytochrome C (Cyt C) and zinc porphyrin (Zn Porph) bound to each multifunctional AuNP. Dynamic light scattering (DLS) and zeta potential measurements were used to confirm the functionalization of AuNPs with Cyt C and Zn Porph. Transmission electron microscopy (TEM) was used in conjunction with UV-visible absorption spectroscopy and DLS to identify the AuNP size and confirm that no aggregation had taken place after functionalization. Despite the overlapping absorption bands of Cyt C and Zn Porph, this method was able to reveal a precise concentration and number of Cyt C and Zn Porph molecules attached per AuNP. Furthermore, using this method, we were able to identify unconjugated molecules, suggesting the need for further purification of the sample. This guide provides a simple and effective method to quickly quantify molecules bound to AuNPs, giving users valuable information, especially for applications in drug delivery and biosensors., This work was supported by the Engineering and Physical Sciences Research Council Grant No. EP/R004072/1. L.P.G.’s work was also supported by Project PID2020-115663GB-C3-2 funded by MCIN/AEI/10.13039/501100011033. L.P.G. and D.B.A. would also like to thank the Generalitat de Catalunya for project 2021SGR01085., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wireless pulsed nanophotoelectrochemical cell for the ultrafast degradation of organic pollutants

  • Serrà, Albert
  • Gómez-Elvira González, José Manuel
  • al Hoda al Bast, Nour
  • Zhang, Yue
  • Duque, Marcos
  • Esplandiú, María J.
  • Esteve, Jaume
  • Nogués, Josep
  • Sepúlveda, Borja
An urgent demand exists for advanced-technologies to efficiently remove persistent organic pollutants from water, while minimizing energy consumption. Here, we introduce an innovative wireless nanophotoelectrochemical (nPEC) cell using pulsed light for the ultrafast degradation/mineralization of organic pollutants. The nPEC cell comprises a nanostructured Si-pn photodiode that monolithically integrates: (i) a Si-n/Au nanowire-based-photocathode for effective light absorption and photovoltage generation, and (ii) a Si-p/mesoporous-NiPt photoanode serving as catalyst to wirelessly amplify the sulfate radical production by low-intensity light without any bias voltage. The efficacy of the nPEC cell was shown by ultrafast degradation (>99 %) and mineralization (>98 %) of three emerging pollutants (tetracycline, levofloxacin and anatoxin-A). Notably, reaction kinetics were boosted by more than one order of magnitude when exposed to light intensities ca. 5-fold lower than sunlight. Remarkably, pulsed light beams in the 100–500 Hz range provided an additional enhancement in the degradation/mineralization efficiencies, reducing energy-input by half, while enhancing the catalyst's oxidation state and durability., We acknowledge the financial support of the projects PID2020-115663 GB-C32, PCI2019-111896-2 (Euronanomed 2019), PID2021-124568NB-I00, PID2022-138588OB-C31, PID2022-138588OB-C32 funded by MICIU/ AEI /10.13039/501100011033 and by ERDF /EU. Authors thank the CCiT-UB for the use of their equipment. The funding from Generalitat de Catalunya through the 2021-SGR-00651 project is also acknowledged. ICN2 is funded by the CERCA programme/ Generalitat de Catalunya . The ICN2 is supported by the CEX2021-001214-S grant funded by MICIU/AEI/10 . 13039/501100011033., With funding from the Spanish government through the "María de Maeztu Centre of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-controlled micron-scale molecular motion

  • Samperi, Mario
  • Bdiri, Bilel
  • Sleet, Charlotte D.
  • Markus, Robert
  • Mallia, Ajith R.
  • Pérez García, Lluïsa
  • Amabilino, David B.
The micron-scale movement of biomolecules along supramolecular pathways, mastered by nature, is a remarkable system requiring strong yet reversible interactions between components under the action of a suitable stimulus. Responsive microscopic systems using a variety of stimuli have demonstrated impressive relative molecular motion. However, locating the position of a movable object that travels along self-assembled fibres under an irresistible force has yet to be achieved. Here, we describe a purely supramolecular system where a molecular 'traveller' moves along a 'path' over several microns when irradiated with visible light. Real-time imaging of the motion in the solvated state using total internal reflection fluorescence microscopy shows that anionic porphyrin molecules move along the fibres of a bis-imidazolium gel upon irradiation. Slight solvent changes mean movement and restructuring of the fibres giving microtoroids, indicating control of motion by fibre mechanics with solvent composition. The insight provided here may lead to the development of artificial travellers that can perform catalytic and other functions., All the authors thank the School of Life Sciences Imaging (SLIM) in Nottingham for access to the optical microscope and the Nanoscale and Microscale Research Centre (nmRC) for facilitating access to electron microscopes. D.B.A. thanks the Telluride Conference on Molecular Rotors, Motors, and Switches for inspiring this research. We warmly thank M. Amabilino i Pérez for assistance with graphics (D.B.A.). A.R.M. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Marie–Skłodowska–Curie grant agreement no. 793424. The microscope facility was established using the BB/L013827/1 fund. This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) under grants EP/M005178/1 and EP/N024818/1 (D.B.A.), EU ERDF (FEDER) funds, Spanish Government grants TEC2017-85059-C3-2-R and PID2020-115663GB-C3-2 (L.P.-G.) and the University of Nottingham (B.B., M.S.) including work under the Anne McLaren fellowship scheme (L.P.-G.) and the Propulsion Futures Beacon of Excellence (D.B.A.)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Wireless pulsed nanophotoelectrochemical cell for the ultrafast degradation of organic pollutants

  • Serrà, Albert|||0000-0003-0147-3400
  • Gomez, Elvira|||0000-0002-9223-6357
  • Al Hoda Al Bast, Nour
  • Zhang, Yue
  • Duque, Marcos
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Esteve, Jaume|||0000-0001-9440-7984
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
An urgent demand exists for advanced-technologies to efficiently remove persistent organic pollutants from water, while minimizing energy consumption. Here, we introduce an innovative wireless nanophotoelectrochemical (nPEC) cell using pulsed light for the ultrafast degradation/mineralization of organic pollutants. The nPEC cell comprises a nanostructured Si-pn photodiode that monolithically integrates: (i) a Si-n/Au nanowire-based-photocathode for effective light absorption and photovoltage generation, and (ii) a Si-p/mesoporous-NiPt photoanode serving as catalyst to wirelessly amplify the sulfate radical production by low-intensity light without any bias voltage. The efficacy of the nPEC cell was shown by ultrafast degradation (>99 %) and mineralization (>98 %) of three emerging pollutants (tetracycline, levofloxacin and anatoxin-A). Notably, reaction kinetics were boosted by more than one order of magnitude when exposed to light intensities ca. 5-fold lower than sunlight. Remarkably, pulsed light beams in the 100-500 Hz range provided an additional enhancement in the degradation/mineralization efficiencies, reducing energy-input by half, while enhancing the catalyst's oxidation state and durability.