Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Room-Temperature Silicon Platform for GHz-Frequency Nanoelectro-Opto-Mechanical Systems

  • Navarro-Urrios, Daniel
  • Colombano, Martín F.
  • Arregui, Guillermo
  • Madiot, Guilhem
  • Pitanti, Alessandro
  • Makkonen, Tapani
  • Ahopelto, Jouni
  • Sotomayor-Torres, Clivia
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-optomechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains., This research has received funding from the European Union H2020 FET Open Project PHENOMEN (No. 713450). TheICN2 authors acknowledge support by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-20190706), the MCIN project SIP (PGC2018-101743-B-100), and by the CERCA Programme Generalitat de Catalunya. G.A. was supported by a BIST and MFC by a S. Ochoa Project Ph.D. studentships. G. M. acknowledges support from the EU ERC project LEIT (GA Nr. 885689). A.M. acknowledges support from MCIN/AEI/10.13039/501100011033/(Projects PGC2018-094490-BC21 and ICTS-2017-28-UPV-9), from Generalitat Valenciana (BEST/2020/178, PROMETEO/2019/123, and IDIFEDER/2021/061) and from "Unio ' n Europea NextGenerationEU/PRTR".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excitation and detection of acoustic phonons in nanoscale systems

  • Ng, Ryan C.
  • Sachat, Alexandros el
  • Céspedes, Francisco
  • Poblet, Martin
  • Madiot, Guilhem
  • Jaramillo-Fernandez, Juliana
  • Florez, Omar
  • Xiao, Peng
  • Sledzinska, Marianna
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
This article is part of the themed collection: Recent Review Articles., Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 authors thank the Severo Ochoa (Spanish Research Agency AEI, grant no. SEV-2017-0706) and the CERCA Programme / Generalitat de Catalunya. R. C. N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A. E. S. acknowledges support by the H2020-MSCA-IF project THERMIC-GA No. 101029727. F. C. acknowledges funding from the scholarship BES-2016-077203 funded by MCIN/AEI/10.13038/501100011033 and by “ESF Investing in your future”. O. F. is supported by BIST PhD fellowship Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 754558. P. X. additionally acknowledges support by a Ph.D. fellowship from the EU Marie Skłodowska-Curie COFUND PREBIST project (Grant No. 754558)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exciton tuning and strain imaging in WS2supported on PDMS micropillars

  • Sledzinska, Marianna
  • Xiao, Peng
  • Puig Vilardell, E.
  • Chávez-Angel, Emigdio
  • Esplandiú, María J.
  • Sotomayor Torres, C. M.
Since the raise of 2D materials, significant research has been dedicated to their strain-dependent electronic and mechanical properties. In this work, we studied exciton energies and low-frequency phonon modes in CVD-grown mono- and few-layer WS2 transferred on PDMS micropillars. The modification of the band structure under strain was investigated by photoluminescence (PL) spectroscopy at room temperature. Machine learning (ML) methods were used to analyze the PL spatial maps and facilitate the spectral deconvolution. For monolayer (1L) WS2, red shift in the exciton energy was detected as a function of the position, which was ascribed to the presence of residual strain. For three-layer (3L) strained WS2, a significant increase in the PL intensity corresponding to direct (K-K) band transition together with a change of exciton energy was observed. From the PL spectra, strain distribution maps were extracted for both studied samples, which strongly resembled the ML clustering results. Finally, the low-frequency Raman modes of WS2 were studied on both Si/SiO2 and PDMS substrates and no significant change of their frequency was observed for the 3L-WS2., This work has been supported by the Severo Ochoa Program (No. SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033), by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos. PGC2018-095032-B-I00 and PID2021-124568NB-I00, and by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the European Union's H2020 FET Proactive Project TOCHA (Grant No. 824140) and the ERC-AdG Project LEIT (Grant No. 885689).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of Synchrotron Radiation-Based Fourier-Transform Infrared Microspectroscopy for Thermal Imaging of Polymer Thin Films

  • Chávez-Angel, Emigdio
  • Ng, Ryan C.
  • Sandell, Susanne
  • He, Jianying
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
  • Kreuzer, Martin
The thermal imaging of surfaces with microscale spatial resolution over micro-sized areas remains a challenging and time-consuming task. Surface thermal imaging is a very important characterization tool in mechanical engineering, microelectronics, chemical process engineering, optics, microfluidics, and biochemistry processing, among others. Within the realm of electronic circuits, this technique has significant potential for investigating hot spots, power densities, and monitoring heat distributions in complementary metal-oxide-semiconductor (CMOS) platforms. We present a new technique for remote non-invasive, contactless thermal field mapping using synchrotron radiation-based Fourier-transform infrared microspectroscopy. We demonstrate a spatial resolution better than 10 um over areas on the order of 12,000 um2 measured in a polymeric thin film on top of CaF2 substrates. Thermal images were obtained from infrared spectra of poly(methyl methacrylate) thin films heated with a wire. The temperature dependence of the collected infrared spectra was analyzed via linear regression and machine learning algorithms, namely random forest and k-nearest neighbor algorithms. This approach speeds up signal analysis and allows for the generation of hyperspectral temperature maps. The results here highlight the potential of infrared absorbance to serve as a remote method for the quantitative determination of heat distribution, thermal properties, and the existence of hot spots, with implications in CMOS technologies and other electronic devices., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). The Research Council of Norway is acknowledged for the support to NorFab (Grant No. 295864) and the HEFACE project (Grant No. 251068). A.C.-A. acknowledges the support from the Fondecyt Iniciación 11200620., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optomechanical Generation of Coherent GHz Vibrations in a Phononic Waveguide

  • Madiot, Guilhem
  • Ng, Ryan C.
  • Arregui, Guillermo
  • Florez, Omar
  • Albrechtsen, Marcus
  • Stobbe, Søren
  • García Fernández, Pedro David
  • Sotomayor Torres, C. M.
13 pages, 4 main text figures, 6 appendix figures, Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while nonpiezoelectric demonstrations have been inefficient. In this Letter, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation around 6.8 GHz, operating at room temperature. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, Grant No. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R. C. N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). O. F. is supported by a BIST PhD fellowship under the Marie Sklodowska Curie Grant Agreement (No. 754558). M. A. and S. S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intermodulation of optical frequency combs in a multimode optomechanical system

  • Ng, Ryan C.
  • Nizet, Paul
  • Navarro-Urrios, D.
  • Arregui, Guillermo
  • Albrechtsen, Marcus
  • García Fernández, Pedro David
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • Madiot, Guilhem
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the megahertz and gigahertz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in gigahertz phononic devices, signal processing, and optical comb sensing applications., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, Grant No. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). O.F. is supported by a BIST Ph.D. fellowship under the Marie Sklodowska Curie Grant Agreement (No. 754558). M.A. and S.S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering heat transport across epitaxial lattice-mismatched van der Waals heterointerfaces

  • Chávez-Angel, Emigdio
  • Tsipas, Polychronis
  • Xiao, Peng
  • Ahmadi, Mohammad Taghi
  • Daaoub, Abdalghani H. S.
  • Sadeghi, Hatef
  • Sotomayor Torres, C. M.
  • Dimoulas, Athanasios
  • Sachat, Alexandros el
Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating thermal metamaterials based on atomically thin lattice-mismatched Bi2Se3/MoSe2 superlattices and graphene/PdSe2 heterostructures with exceptional thermal resistances (70–202 m2 K/GW) and ultralow cross-plane thermal conductivities (0.012–0.07 W/mK) at room temperature, comparable to those of amorphous materials. Experimental data obtained using frequency-domain thermoreflectance and low-frequency Raman spectroscopy, supported by tight-binding phonon calculations, reveal the impact of lattice mismatch, phonon-interface scattering, size effects, temperature, and interface thermal resistance on cross-plane heat dissipation, uncovering different thermal transport regimes and the dominant role of long-wavelength phonons. Our findings provide essential insights into emerging synthesis and thermal characterization methods and valuable guidance for the development of large-area heteroepitaxial van der Waals films of dissimilar materials with tailored thermal transport characteristics., A.E. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727). H.S. acknowledges the UKRI for Future Leaders Fellowship numbers MR/S015329/2 and MR/X015181/1. E.C.A. and C.M.S.T. acknowledge support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimode optomechanics with a two-dimensional optomechanical crystal

  • Madiot, Guilhem
  • Albrechtsen, Marcus
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • Arregui, Guillermo
Chip-scale multimode optomechanical systems have unique benefits for sensing, metrology, and quantum technologies relative to their single-mode counterparts. Slot-mode optomechanical crystals enable sideband resolution and large optomechanical couplings of a single optical cavity to two microwave-frequency mechanical modes. Still, previous implementations have been limited to nanobeam geometries, whose effective quantum cooperativity at ultralow temperatures is limited by their low thermal conductance. In this work, we design and experimentally demonstrate a two-dimensional mechanical–optical–mechanical (MOM) platform that dispersively couples a slow-light slot-guided photonic-crystal waveguide mode and two slow-sound ∼ 7 GHz phononic wire modes localized in physically distinct regions. We first demonstrate optomechanical interactions in long waveguide sections, unveiling acoustic group velocities below 800 m/s, and then move on to mode-gap adiabatic heterostructure cavities with a tailored mechanical frequency difference. Through optomechanical spectroscopy, we demonstrate optical quality factors Q ∼ 105, vacuum optomechanical coupling rates, go/2π, of 1.5 MHz, and dynamical back-action effects beyond the single-mode picture. At a larger power and adequate laser-cavity detuning, we demonstrate regenerative optomechanical oscillations involving a single mechanical mode, extending to both mechanical modes through modulation of the input laser drive at their frequency difference. This work constitutes an important advance toward engineering MOM systems with nearly degenerate mechanical modes as part of hybrid multipartite quantum systems., G.M. and C.M.S.-T. acknowledge the support from the project LEIT funded by the European Research Council, H2020 (Grant Agreement No. 885689). ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, Grant No. SEV–2017-0706) and by the CERCA Programme/Generalitat de Catalunya. M.A. and S.S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170). S.S. additionally acknowledges funding from the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), the Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), the Independent Research Fund Denmark (Grant No. 0135-00315—VAFL), and the European Research Council (Grant No. 101045396—SPOTLIGHT). G.A. acknowledges the financial support from the European Union’s Horizon 2021 research and innovation program under the Marie Skłodowska-Curie Actions (Grant No. 101067606—TOPEX)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ Raman analysis of reduced-graphene oxide-based electroactive nanofluids

  • Parpal, Monica
  • El Sachat, Alexandros
  • Sotomayor Torres, C. M.
  • Gómez-Romero, P.
  • Rueda-García, Daniel
  • Chávez-Angel, Emigdio
This study investigates the effect of an applied stationary voltage on the vibrational properties of 1 M H2SO4 and H2SO4-based reduced-graphene oxide (rGO) nanofluids, commonly used as electrolytes in electrochemical cells. Our findings indicate that the energy of the symmetric stretching vibrations of H2SO4 remains unaffected by the electric field. However, a slight deviation toward lower energy and an enhancement of Raman intensity are observed in the asymmetric stretching vibration of H2SO4 due to the applied voltage. Furthermore, the addition of rGO to the base fluid produces a significant redshift in the symmetric stretching bands, indicating that the presence of rGO produces important changes at the macroscopic level in the base fluid. Synchronous and asynchronous maps further uncover the positive correlations between the D and G bands as well as between rGO and the base fluid bands. Specifically, the asynchronous map revealed complex dynamics between the rGO and H2SO4 bands and only positive correlations between H2SO4 bands. These results demonstrate the potential of Raman spectroscopy as a non-invasive technique to systematically study the influence of electric fields on the vibrational properties of fluids and nanofluids, which can ultimately lead to the development of significantly more efficient electrochemical cells., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. E.C.A and C.M.S.T. acknowledge support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727). P.G.-R. acknowledges support from Spanish Ministry of Science and Innovation through the project Nanopeistorage Grant Agreement No. PID2021-128390OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS2 phononic crystals for advanced thermal management

  • Xiao, Peng
  • El Sachat, Alexandros
  • Chávez-Angel, Emigdio
  • Ng, Ryan C.
  • Nikoulis, Giorgos
  • Kioseoglou, Joseph
  • Termentzidis, Konstantinos
  • Sotomayor Torres, C. M.
  • Sledzinska, Marianna
Effective thermal management of electronic devices encounters substantial challenges owing to the notable power densities involved. Here, we propose layered MoS2 phononic crystals (PnCs) that can effectively reduce thermal conductivity (κ) with relatively small disruption of electrical conductivity (σ), offering a potential thermal management solution for nanoelectronics. These layered PnCs exhibit remarkable efficiency in reducing κ, surpassing that of Si and SiC PnCs with similar periodicity by ~100-fold. Specifically, in suspended MoS2 PnCs, we measure an exceptionally low κ down to 0.1 watts per meter kelvin, below the amorphous limit while preserving the crystalline structure. These findings are supported by molecular dynamics simulations that account for the film thickness, porosity, and temperature. We demonstrate the approach efficiency by fabricating suspended heat-routing structures that effectively confine and guide heat flow in prespecified directions. This study underpins the immense potential of layered materials as directional heat spreaders, thermal insulators, and active components for thermoelectric devices., This work was supported by the Severo Ochoa program, the Spanish Research Agency (AEI, grant SEV-2017-0706), and the CERCA Programme/Generalitat de Catalunya. We acknowledge support from Spanish MICINN Project SIP (grant no. PGC2018-101743-B-I00) and MINERVA (grant no. PCI2021-122092-2A). P.X. acknowledges support from the Barcelona Recerca Jove I Emergent Convocatoria 2022 - LEONINE project (grant no. 22S09495-001) and the EU Marie Skłodowska-Curie COFUND PREBIST program (grant agreement 754558). C.M.S.T. acknowledges support from the ERC project LEIT (grant agreement 885689). A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (grant no. 101029727). This work was supported by computational time granted from the Greek Research & Technology Network (GRNET) in the “ARIS” National HPC infrastructure under the project NOUS (pr015006); E.C.A. acknowledges the financial support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Brillouin light scattering spectroscopy of cavity optomechanical crystals

  • Madiot, Guilhem
  • Florez, Omar
  • Sotomayor Torres, C. M.
Special Collection: Brillouin Scattering and Optomechanics, We present a detailed study of Brillouin light scattering (BLS) spectroscopy applied to phononic waveguides embedded within optomechanical crystal structures. By comparing numerical simulations with experimental spectra, we validate the capability of BLS to probe GHz mechanical modes, including acoustic slow modes at 6.7 GHz, in silicon-on-insulator platforms at room temperature. Our results highlight the potential of BLS to characterize mechanical dispersion, guided modes, and acoustic bandgaps in cavity optomechanics, where photons and phonons are colocalized. This work provides critical insights into the feasibility of leveraging hypersonic phonons for in-chip interconnects and integrated broadband communication systems., The authors acknowledge the support from the project LEIT funded by the European Research Council, H2020 (Grant Agreement No. 885689). ICN2 is supported by the Severo Ochoa program of the Spanish Research Agency (AEI, Grant No. SEV–2017-0706) and by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of Synchrotron Radiation-Based Fourier-Transform Infrared Microspectroscopy for Thermal Imaging of Polymer Thin Films

  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Sandell, Susanne|||0000-0003-1906-6790
  • He, Jianying|||0000-0001-8485-7893
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Kreuzer, Martin|||0000-0002-7305-5016
The thermal imaging of surfaces with microscale spatial resolution over micro-sized areas remains a challenging and time-consuming task. Surface thermal imaging is a very important characterization tool in mechanical engineering, microelectronics, chemical process engineering, optics, microfluidics, and biochemistry processing, among others. Within the realm of electronic circuits, this technique has significant potential for investigating hot spots, power densities, and monitoring heat distributions in complementary metal-oxide-semiconductor (CMOS) platforms. We present a new technique for remote non-invasive, contactless thermal field mapping using synchrotron radiation-based Fourier-transform infrared microspectroscopy. We demonstrate a spatial resolution better than 10 um over areas on the order of 12,000 um measured in a polymeric thin film on top of CaF substrates. Thermal images were obtained from infrared spectra of poly(methyl methacrylate) thin films heated with a wire. The temperature dependence of the collected infrared spectra was analyzed via linear regression and machine learning algorithms, namely random forest and k-nearest neighbor algorithms. This approach speeds up signal analysis and allows for the generation of hyperspectral temperature maps. The results here highlight the potential of infrared absorbance to serve as a remote method for the quantitative determination of heat distribution, thermal properties, and the existence of hot spots, with implications in CMOS technologies and other electronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exciton tuning and strain imaging in WS2supported on PDMS micropillars

  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Xiao, Peng|||0000-0002-4711-2566
  • Puig Vilardell, E.
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Since the raise of 2D materials, significant research has been dedicated to their strain-dependent electronic and mechanical properties. In this work, we studied exciton energies and low-frequency phonon modes in CVD-grown mono- and few-layer WS2 transferred on PDMS micropillars. The modification of the band structure under strain was investigated by photoluminescence (PL) spectroscopy at room temperature. Machine learning (ML) methods were used to analyze the PL spatial maps and facilitate the spectral deconvolution. For monolayer (1L) WS2, red shift in the exciton energy was detected as a function of the position, which was ascribed to the presence of residual strain. For three-layer (3L) strained WS2, a significant increase in the PL intensity corresponding to direct (K-K) band transition together with a change of exciton energy was observed. From the PL spectra, strain distribution maps were extracted for both studied samples, which strongly resembled the ML clustering results. Finally, the low-frequency Raman modes of WS2 were studied on both Si/SiO2 and PDMS substrates and no significant change of their frequency was observed for the 3L-WS2.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Room-temperature silicon platform for GHz-frequency nanoelectro-opto-mechanical systems

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Madiot, Guilhem|||0000-0003-2662-4324
  • Pitanti, Alessandro|||0000-0002-7027-0300
  • Griol, Amadeu|||0000-0002-5428-5713
  • Makkonen, Tapani
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Martínez, Alejandro|||0000-0001-5448-0140
Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-opto-mechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-Temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Excitation and detection of acoustic phonons in nanoscale systems

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Céspedes, Francisco|||0000-0001-5444-7113
  • Poblet, Martin|||0000-0002-8259-4660
  • Madiot, Guilhem|||0000-0003-2662-4324
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Florez, Omar|||0000-0001-6662-9811
  • Xiao, Peng|||0000-0002-4711-2566
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering Heat Transport Across Epitaxial Lattice-Mismatched van der Waals Heterointerfaces

  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Tsipas, Polychronis|||0000-0001-9064-9601
  • Xiao, Peng|||0000-0002-4711-2566
  • Ahmadi, Mohammad Taghi
  • Daaoub, Abdalghani H. S.
  • Sadeghi, Hatef|||0000-0001-5398-8620
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Dimoulas, Athanasios|||0000-0003-3199-1356
  • Sachat, Alexandros el|||0000-0003-3798-9724
Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating thermal metamaterials based on atomically thin lattice-mismatched BiSe/MoSe superlattices and graphene/PdSe heterostructures with exceptional thermal resistances (70-202 m 2 K/GW) and ultralow cross-plane thermal conductivities (0.012-0.07 W/mK) at room temperature, comparable to those of amorphous materials. Experimental data obtained using frequency-domain thermoreflectance and low-frequency Raman spectroscopy, supported by tight-binding phonon calculations, reveal the impact of lattice mismatch, phonon-interface scattering, size effects, temperature, and interface thermal resistance on cross-plane heat dissipation, uncovering different thermal transport regimes and the dominant role of long-wavelength phonons. Our findings provide essential insights into emerging synthesis and thermal characterization methods and valuable guidance for the development of large-area heteroepitaxial van der Waals films of dissimilar materials with tailored thermal transport characteristics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Intermodulation of optical frequency combs in a multimode optomechanical system

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Nizet, Paul
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Albrechtsen, Marcus|||0000-0003-4226-0997
  • García Fernández, Pedro David|||0000-0002-3422-178X
  • Stobbe, Søren|||0000-0002-0991-041X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Madiot, Guilhem|||0000-0003-2662-4324
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the megahertz and gigahertz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in gigahertz phononic devices, signal processing, and optical comb sensing applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In situ Raman analysis of reduced-graphene oxide-based electroactive nanofluids

  • Parpal, Monica
  • El Sachat, Alexandros
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
This study investigates the effect of an applied stationary voltage on the vibrational properties of 1 M HSO and HSO-based reduced-graphene oxide (rGO) nanofluids, commonly used as electrolytes in electrochemical cells. Our findings indicate that the energy of the symmetric stretching vibrations of HSO remains unaffected by the electric field. However, a slight deviation toward lower energy and an enhancement of Raman intensity are observed in the asymmetric stretching vibration of HSO due to the applied voltage. Furthermore, the addition of rGO to the base fluid produces a significant redshift in the symmetric stretching bands, indicating that the presence of rGO produces important changes at the macroscopic level in the base fluid. Synchronous and asynchronous maps further uncover the positive correlations between the D and G bands as well as between rGO and the base fluid bands. Specifically, the asynchronous map revealed complex dynamics between the rGO and HSO bands and only positive correlations between HSO bands. These results demonstrate the potential of Raman spectroscopy as a non-invasive technique to systematically study the influence of electric fields on the vibrational properties of fluids and nanofluids, which can ultimately lead to the development of significantly more efficient electrochemical cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MoS2 phononic crystals for advanced thermal management

  • Xiao, Peng|||0000-0002-4711-2566
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Nikoulis, Georgios
  • Kioseoglou, Joseph
  • Termentzidis, Konstantinos|||0000-0002-8521-7107
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Sledzinska, Marianna|||0000-0001-8592-1121
Effective thermal management of electronic devices encounters substantial challenges owing to the notable power densities involved. Here, we propose layered MoS phononic crystals (PnCs) that can effectively reduce thermal conductivity (κ) with relatively small disruption of electrical conductivity (σ), offering a potential thermal management solution for nanoelectronics. These layered PnCs exhibit remarkable efficiency in reducing κ, surpassing that of Si and SiC PnCs with similar periodicity by ~100-fold. Specifically, in suspended MoS PnCs, we measure an exceptionally low κ down to 0.1 watts per meter kelvin, below the amorphous limit while preserving the crystalline structure. These findings are supported by molecular dynamics simulations that account for the film thickness, porosity, and temperature. We demonstrate the approach efficiency by fabricating suspended heat-routing structures that effectively confine and guide heat flow in prespecified directions. This study underpins the immense potential of layered materials as directional heat spreaders, thermal insulators, and active components for thermoelectric devices.