Pasar al contenido principal

MAKING NEW ELECTRONIC DEVICES FROM AMORPHOUS MATERIALS

PCI2021-122092-2A

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprograma Subprograma Estatal de Internacionalización
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the improved stability of amorphous boron-nitride upon carbon doping

  • Kaya, Onurcan
  • Colombo, Luigi
  • Antidormi, Aleandro
  • Lanza, Mario
  • Roche, Stephan
We report on a large improvement of the thermal stability and mechanical properties of amorphous boron-nitride upon carbon doping. By generating versatile force fields using first-principles and machine learning simulations, we investigate the structural properties of amorphous boron-nitride with varying contents of carbon (from a few percent to 40 at%). We found that for 20 at% of carbon, the sp/sp ratio reaches a maximum with a negligible graphitisation effect, resulting in an improvement of the thermal stability by up to 20% while the bulk Young's modulus increases by about 30%. These results provide a guide to experimentalists and engineers to further tailor the growth conditions of BN-based compounds as non-conductive diffusion barriers and ultralow dielectric coefficient materials for a number of applications including interconnect technology., This project has been supported by Samsung Advanced Institute of Technology and is conducted under the REDI Program, a project that has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101034328. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Simulations were performed at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of hydrogenation on the stability and mechanical properties of amorphous boron nitride

  • Kaya, Onurcan
  • Colombo, Luigi
  • Antidormi, Aleandro
  • Villena, Marco A.
  • Lanza, Mario
  • Cole, Ivan
  • Roche, Stephan
Interconnect materials with ultralow dielectric constant, and good thermal and mechanical properties are crucial for the further miniaturization of electronic devices. Recently, it has been demonstrated that ultrathin amorphous boron nitride (aBN) films have a very low dielectric constant, high density (above 2.1 g cm−3), high thermal stability, and mechanical properties. The excellent properties of aBN derive from the nature and degree of disorder, which can be controlled at fabrication, allowing tuning of the physical properties for desired applications. Here, we report an improvement in the stability and mechanical properties of aBN upon hydrogen doping. With the introduction of a Gaussian approximation potential for atomistic simulations, we investigate the changing morphology of aBN with varying H doping concentrations. We found that for 8 at% of H doping, the concentration of sp3-hybridized atoms reaches to a maximum which leads to an improvement of thermal stability and mechanical properties by 20%. These results will be a guideline for experimentalists and process engineers to tune the growth conditions of aBN films for numerous applications., This project has been supported by Samsung Advanced Institute of Technology and is conducted under the REDI Program, a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101034328. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’. Simulations were performed at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. Additional computational support was received from the King Abdullah University of Science and Technology-KAUST (Supercomputer Shaheen II Cray XC40) and Texas Advanced Computing Center (TACC) at The University of Texas at Austin., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Density functional theory and molecular dynamics simulations for resistive switching research

  • Villena, Marco A.
  • Kaya, Onurcan
  • Schwingenschlögl, Udo
  • Roche, Stephan
  • Lanza, Mario
Resistive switching (RS) devices, often referred to as memristors, have exhibited interesting electronic performance that could be useful to enhance the capabilities of multiple types of integrated circuits that we use in our daily lives. However, RS devices still do not fulfil the reliability requirements of most commercial applications, mainly because the switching and failure mechanisms are still not fully understood. Density functional theory (DFT) and/or molecular dynamics (MD) are simulations used to describe complex interactions between groups of atoms, and they can be employed to clarify which physical, chemical, thermal and/or electronic phenomena take place during the normal operation of RS devices, which should help to enhance their performance and reliability. In this article, we review which studies have employed DFT and/or MD in the field of RS research, focusing on which methods have been employed and which material properties have been calculated. The goal of this article is not to delve into deep mathematical and computational issues – although some fundamental knowledge is presented – but to describe which type of simulations have been carried out and why they are useful in the field of RS research. This article helps to bridge the gap between the vast group of experimentalists working in the field of RS and computational scientists developing DFT and/or MD simulations., This work has been supported by the baseline funding scheme of the King Abdullah University of Science and Technology. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’. This work has been performed ‘Amb el support del Departament de Recerca i Universitats de la Generalitat de Catalunya’ and with funding from PN: ‘Proyecto PID2022-138283NB-I00 (MCIN/ AEI /10.13039/501100011033) and by FEDER. The author O.K. is supported by the REDI Program, a project that has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 101034328., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring dielectric properties in atomistic models of amorphous boron nitride

  • Galvani, Thomas
  • Hamze, Ali K.
  • Caputo, Laura
  • Kaya, Onurcan
  • Dubois, Simon M.-M.
  • Colombo, Luigi
  • Nguyen, Viet-Hung
  • Shin, Yongwoo
  • Shin, Hyeon-Jin
  • Charlier, Jean-Christopher
  • Roche, Stephan
All data that support the findings of this study are included within the article (and any supplementary files)., We report a theoretical study of dielectric properties of models of amorphous Boron Nitride, using interatomic potentials generated by machine learning. We first perform first-principles simulations on small (about 100 atoms in the periodic cell) sample sizes to explore the emergence of mid-gap states and its correlation with structural features. Next, by using a simplified tight-binding electronic model, we analyse the dielectric functions for complex three dimensional models (containing about 10.000 atoms) embedding varying concentrations of sp1, sp2 and sp3 bonds between B and N atoms. Within the limits of these methodologies, the resulting value of the zero-frequency dielectric constant is shown to be influenced by the population density of such mid-gap states and their localization characteristics. We observe nontrivial correlations between the structure-induced electronic fluctuations and the resulting dielectric constant values. Our findings are however just a first step in the quest of accessing fully accurate dielectric properties of as-grown amorphous BN of relevance for interconnect technologies and beyond., This project has been supported by Samsung Advanced Institute of Technology. This paper reflects only the author's view and the Research Executive Agency is not responsible for any use that may be made of the information it contains. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the 'European Union NextGenerationEU/PRTR'. This work has been performed 'Amb el suport del Departament de Recerca i Universitats de la Generalitat de Catalunya' and with funding from PN: 'Proyecto PID2022-138283NB-I00 (MCIN/ AEI /10.13039/501100011033) and by FEDER. The MINERVA project is also aknowledged: Proyecto PCI2021-122092-2 financiado por MCIN/AEI /10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. This project is also funded by the European Union's Horizon 2020 Research and Innovation programme under the Marie Sklodowska-Curie entitled STiBNite (N∘ 956923), by the Fédération Wallonie-Bruxelles through the ARC on Dynamically Reconfigurable Moiré Materials (N∘ 21/26-116), by the Flag-Era JTC Project MINERVA (N∘ R.8006.21), by the EOS project 'CONNECT' (N∘ 40007563) and by the Belgium F.R.S.-FNRS through the research project (N∘ T.029.22F). Simulations were performed at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. Computational resources have also been provided by the CISM supercomputing facilities of UCLouvain and the CÉCI consortium funded by F.R.S.-FNRS of Belgium (N∘ 2.5020.11). Additional computational support was received from the King Abdullah University of Science and Technology-KAUST (Supercomputer Shaheen II Cray XC40) and Texas Advanced Computing Center (TACC) at The University of Texas at Austin. O K is supported by the REDI Program, a project that has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 101034328. S R acknowledges support from PID2019-106684GB-I00 funded by MICIU/AEI /10.13039/501100011033 and by ERDF and EU and 2021 SGR 00997, funded by Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS2 phononic crystals for advanced thermal management

  • Xiao, Peng
  • El Sachat, Alexandros
  • Chávez-Angel, Emigdio
  • Ng, Ryan C.
  • Nikoulis, Giorgos
  • Kioseoglou, Joseph
  • Termentzidis, Konstantinos
  • Sotomayor Torres, C. M.
  • Sledzinska, Marianna
Effective thermal management of electronic devices encounters substantial challenges owing to the notable power densities involved. Here, we propose layered MoS2 phononic crystals (PnCs) that can effectively reduce thermal conductivity (κ) with relatively small disruption of electrical conductivity (σ), offering a potential thermal management solution for nanoelectronics. These layered PnCs exhibit remarkable efficiency in reducing κ, surpassing that of Si and SiC PnCs with similar periodicity by ~100-fold. Specifically, in suspended MoS2 PnCs, we measure an exceptionally low κ down to 0.1 watts per meter kelvin, below the amorphous limit while preserving the crystalline structure. These findings are supported by molecular dynamics simulations that account for the film thickness, porosity, and temperature. We demonstrate the approach efficiency by fabricating suspended heat-routing structures that effectively confine and guide heat flow in prespecified directions. This study underpins the immense potential of layered materials as directional heat spreaders, thermal insulators, and active components for thermoelectric devices., This work was supported by the Severo Ochoa program, the Spanish Research Agency (AEI, grant SEV-2017-0706), and the CERCA Programme/Generalitat de Catalunya. We acknowledge support from Spanish MICINN Project SIP (grant no. PGC2018-101743-B-I00) and MINERVA (grant no. PCI2021-122092-2A). P.X. acknowledges support from the Barcelona Recerca Jove I Emergent Convocatoria 2022 - LEONINE project (grant no. 22S09495-001) and the EU Marie Skłodowska-Curie COFUND PREBIST program (grant agreement 754558). C.M.S.T. acknowledges support from the ERC project LEIT (grant agreement 885689). A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (grant no. 101029727). This work was supported by computational time granted from the Greek Research & Technology Network (GRNET) in the “ARIS” National HPC infrastructure under the project NOUS (pr015006); E.C.A. acknowledges the financial support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-step ALD process for non-oxide ceramic deposition: the example of boron nitride

  • Hossain, Ali
  • Souvignet, Thomas
  • Innis, Neil R.
  • Hao, Wenjun
  • Boisron, Olivier
  • Florea, Ileana
  • Xiao, Peng
  • Sledzinska, Marianna
  • Journet, Catherine
  • Marichy, Catherine
Atomic layer deposition (ALD) based on polymer-derived ceramics (PDCs) chemistry is used for the fabrication of boron nitride thin films from reaction between trichloroborazine and hexamethyldisilazane. The transposition of the PDCs route to ALD is highly appealing for depositing ceramics, especially non-oxide ones, as it offers various molecular precursors. From a two-step approach composed of an ALD process forming a so-called preceramic film and its subsequent ceramization, conformal and homogenous BN layers are successfully synthesized on various inorganic substrates. In the first stage, smooth polyborazine coatings are obtained at a temperature as low as 90 °C. The saturation and self-limitation of the ALD gas-surface reactions are verified. Intriguingly, three ALD windows seem to exist and are attributed to change in ligand exchange. After the ceramization stage using a heat treatment, conformal near-stoichiometric BN layers are obtained. Their structure in terms of crystallinity can be adjusted from amorphous to well-crystalline sp2 phase by controlling the treatment temperature. In particular, a crystallization onset occurs at 1000 °C and well defined sp2 crystalline planes oriented parallel to the surface are noted after ceramization at 1350 °C. Finally, side-modification of the substrate surface induced by the thermal treatment appears to impact on the final BN topography and defect generation., This work has been financially supported by the National Research Agency, France (projects n° ANR-16-CE08-0021-01, ANR-20-CE09-0014-01, ANR- 21-GRF1-0002). This work was also supported by the Severo Ochoa program, the Spanish Research Agency (AEI, Grant SEV-2017-0706), and the CERCA Programme/Generalitat de Catalunya. MS and PX acknowledge support from Spanish MICINN Project MINERVA (Grant No. PCI2021-122092-2A)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D hexagonal boron nitride-based anticorrosion coatings

  • Kaya, Onurcan
  • Gabatel, Luca
  • Bellani, Sebastiano
  • Barberis, Fabrizio
  • Bonaccorso, Francesco
  • Cole, Ivan
  • Roche, Stephan
The corrosion of metallic surfaces poses significant challenges across industries such as petroleum, energy, and biomedical sectors, leading to structural degradation, safety risks, and substantial maintenance costs. Traditional organic and metallic coatings provide some protection, but their limited durability and susceptibility to harsh environmental conditions necessitate the development of more advanced and efficient solutions. This has driven significant interest in two-dimensional materials, with graphene being extensively studied for its exceptional mechanical strength and impermeability to gases and ions. However, while graphene offers short-term corrosion protection, its high electrical conductivity presents a long-term issue by promoting galvanic corrosion on metal surfaces. In contrast, hexagonal boron nitride (h-BN) has emerged as a promising alternative for anticorrosion coatings. h-BN combines exceptional chemical stability, impermeability, and electrical insulation, making it particularly suited for long-term protection in highly corrosive or high-temperature environments. While h-BN holds promise as anticorrosion material, challenges such as structural defects, agglomeration of nanosheets, and poor dispersion within coatings limit its performance. This review provides a comprehensive analysis of recent advancements in addressing these challenges, including novel functionalization strategies, scalable synthesis methods, and hybrid systems that integrate h-BN with complementary materials. By bridging the gap between fundamental research and industrial applications, this review outlines the potential for h-BN to revolutionize anticorrosion technologies. These obstacles necessitate advanced strategies such as surface functionalization to improve compatibility with polymer matrices and dispersion optimization to minimize agglomeration. Recent advancements highlight the incorporation of h-BN into composite materials, which have shown significant advances in durability, adhesion, and overall performance. Future directions for h-BN research emphasize scalable fabrication techniques to produce large-area, defect-free coatings suitable for industrial deployment. Furthermore, hybrid systems that integrate h-BN with complementary materials are proposed to enhance corrosion resistance and address specific environmental and operational demands. These approaches hold the potential to establish h-BN as a transformative material for next-generation anticorrosion technologies., This project has been supported and conducted under the REDI Program, a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101034328. This paper reflects only the author’s view, and the Research Executive Agency is not responsible for any use that may be made of the information it contains. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’. BeDimensional acknowledges funding from the European Union’s DIAMOND Horizon Europe research and innovation program under Grant Agreement No. 101084124, the European Union’s LAPERITIVO Horizon Europe research and innovation program under Grant Agreement No. 101147311, from the Italian Ministry of Environment and Energy Security in the framework of the Project GoPV (CSEAA_00011) for Research on the Electric System, and from the Italian Ministero della Università e Ricerca (MUR) in the framework of the Project FIT4H2. BeDimensional acknowledges PFBP project partners., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amorphous boron nitride as an ultrathin copper diffusion barrier for advanced interconnects

  • Kaya, Onurcan
  • Kim, Hyeongjoon
  • Kim, Byeongkyu
  • Galvani, Thomas
  • Colombo, Luciano
  • Lanza, Mario
  • Shin, Hyeon-Jin
  • Cole, Ivan
  • Shin, Hyeon Suk
  • Roche, Stephan
This study focuses on amorphous boron nitride (α-BN) as a novel diffusion barrier for advanced semiconductor technology, particularly addressing the critical challenge of copper diffusion in back-end-of-line (BEOL) interconnects. Owing to its ultralow dielectric constant and robust barrier properties, α-BN is examined as an alternative to conventional low-k dielectrics. The investigation primarily employs theoretical modelling, using a Gaussian approximation potential, to simulate and understand the atomic-level interactions. This machine-learning-based potential enables realistic simulations of amorphous α-BN structures and allows us to examine how different film morphologies affect barrier performance. Furthermore, we studied the electronic and optical properties of the films using a simple Tight-Binding model. In addition to the theoretical work, we performed copper diffusion experiments through PECVD-grown α-BN on Si substrates. Theoretical and experimental results indicate that α-BN films can suppress Cu diffusion at nanometre thicknesses. Together, molecular dynamics simulations based on a machine-learned interatomic potential and PECVD experiments support the use of α-BN as a Cu diffusion barrier for BEOL interconnects., This project has been supported by Samsung Advanced Institute of Technology and is conducted under the REDI Program, a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101034328. This paper reflects only the author’s view and the Research Executive Agency is not responsible for any use that may be made of the information it contains. This work was supported by Institute for Basic Science (IBS-R036-D1), Republic of Korea. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’. S R is also supported by MICIN with European funds NextGenerationEU (PRTRC17.I1) funded by Generalitat de Catalunya and by 2021 SGR 00997. H -J S acknowledges support from the National Research Foundation of Korea (NRF) Grant funded by the Korea government Ministry of Science and ICT (RS-2024-00352458). Simulations were performed at the Texas Advanced Computing Center (TACC) at The University of Texas at Austin and the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness-dependent thermoelectric characterization of 2D SnSe2 on a micro-chip platform

  • Xiao, Peng
  • Aubergier, Nathan
  • Chávez-Angel, Emigdio
  • Maire, Jeremie
  • Sachat, Alexandros el
  • Chessel, Nolwenn
  • Tainoff, Dimitri
  • Sotomayor Torres, C. M.
  • Sledzinska, Marianna
  • Dilhaire, Stefan
  • Bourgeois, Olivier
Investigating the temperature dependence of the Seebeck coefficient in low-dimensional materials provides an effective means to uncover how crystallinity, size, and thickness influence thermoelectric performance. Such insights are crucial for advancing large-scale thermoelectric devices and Seebeck-based sensors. To enhance measurement precision and efficiency, we developed a microchip platform specifically tailored for accurate Seebeck coefficient measurements in low-dimensional systems. The chip accommodates a broad range of samples, including both polycrystalline thin films (chemically or physically deposited) and mechanically exfoliated two-dimensional (2D) crystals. It integrates micro-heaters, temperature sensors, and voltage electrodes, enabling the generation of controlled in-plane temperature gradients and the simultaneous measurement of the induced Seebeck voltage (ΔV). Finite-element simulations support the formation of stable and tunable temperature differences across the chip. To validate the platform, we first measured Bi<inf>2</inf>Te<inf>3</inf>-based thin films, obtaining Seebeck coefficients consistent with reported literature values, thereby confirming the accuracy and robustness of the setup. Subsequently, mechanically exfoliated crystalline SnSe<inf>2</inf> flakes were investigated. Their Seebeck coefficient exhibited clear dependencies on both thickness and temperature, the absolute value increasing from −349 ± 20 μV/K at 100 K to −521 ± 10 μV/K at 300 K in a 198 nm-thick sample. These findings highlight the strong influence of dimensionality on thermoelectric transport in SnSe<inf>2</inf>. Overall, this work establishes a versatile platform for evaluating emerging 2D materials and their heterostructures, facilitating both fundamental research and the engineering of efficient 2D material-based thermoelectric devices., P.X. acknowledges support from the Barcelona Recerca Jove I Emergent Convocatoria 2022—LEONINE project (Grant No. 22S09495-001), the EU Marie Skłodowska-Curie COFUND PREBIST program (Grant No. 754558). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) was funded by the CERCA program/Generalitat de Catalunya and was supported by the Severo Ochoa Centres of Excellence Programme, Grant No. CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. M.S. acknowledges support from PID2023-152783OB-I00 by MICIU and PCI2021-122092-2A funded by MCIN/AEI/10.13039-501100011033 and by the European Union NextGenerationEU/PRTR. This work was also supported by ANR-22-CE09-CO35 through the project NEXTOP. This project has received funding from the European Union's Horizon Europe research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101107155 (Carmen). This work was co-funded by the European Union (ERC, TheMA, 101117958). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Revealing the improved stability of amorphous boron-nitride upon carbon doping

  • Kaya, Onurcan|||0000-0002-5814-5486
  • Colombo, Luigi|||0000-0002-9048-3565
  • Antidormi, Aleandro|||0000-0002-5266-8147
  • Lanza, Mario|||0000-0003-4756-8632
  • Roche, Stephan|||0000-0003-0323-4665
We report on a large improvement of the thermal stability and mechanical properties of amorphous boron-nitride upon carbon doping. By generating versatile force fields using first-principles and machine learning simulations, we investigate the structural properties of amorphous boron-nitride with varying contents of carbon (from a few percent to 40 at%). We found that for 20 at% of carbon, the sp/sp ratio reaches a maximum with a negligible graphitisation effect, resulting in an improvement of the thermal stability by up to 20% while the bulk Young's modulus increases by about 30%. These results provide a guide to experimentalists and engineers to further tailor the growth conditions of BN-based compounds as non-conductive diffusion barriers and ultralow dielectric coefficient materials for a number of applications including interconnect technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of hydrogenation on the stability and mechanical properties of amorphous boron nitride

  • Kaya, Onurcan|||0000-0002-5814-5486
  • Colombo, Luigi|||0000-0002-9048-3565
  • Antidormi, Aleandro|||0000-0002-5266-8147
  • Villena, Marco A.|||0000-0001-5547-3380
  • Lanza, Mario|||0000-0003-4756-8632
  • Cole, Ivan|||0000-0001-6582-1457
  • Roche, Stephan|||0000-0003-0323-4665
Interconnect materials with ultralow dielectric constant, and good thermal and mechanical properties are crucial for the further miniaturization of electronic devices. Recently, it has been demonstrated that ultrathin amorphous boron nitride (aBN) films have a very low dielectric constant, high density (above 2.1 g cm), high thermal stability, and mechanical properties. The excellent properties of aBN derive from the nature and degree of disorder, which can be controlled at fabrication, allowing tuning of the physical properties for desired applications. Here, we report an improvement in the stability and mechanical properties of aBN upon hydrogen doping. With the introduction of a Gaussian approximation potential for atomistic simulations, we investigate the changing morphology of aBN with varying H doping concentrations. We found that for 8 at% of H doping, the concentration of sp -hybridized atoms reaches to a maximum which leads to an improvement of thermal stability and mechanical properties by 20%. These results will be a guideline for experimentalists and process engineers to tune the growth conditions of aBN films for numerous applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MoS2 phononic crystals for advanced thermal management

  • Xiao, Peng|||0000-0002-4711-2566
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Nikoulis, Georgios
  • Kioseoglou, Joseph
  • Termentzidis, Konstantinos|||0000-0002-8521-7107
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Sledzinska, Marianna|||0000-0001-8592-1121
Effective thermal management of electronic devices encounters substantial challenges owing to the notable power densities involved. Here, we propose layered MoS phononic crystals (PnCs) that can effectively reduce thermal conductivity (κ) with relatively small disruption of electrical conductivity (σ), offering a potential thermal management solution for nanoelectronics. These layered PnCs exhibit remarkable efficiency in reducing κ, surpassing that of Si and SiC PnCs with similar periodicity by ~100-fold. Specifically, in suspended MoS PnCs, we measure an exceptionally low κ down to 0.1 watts per meter kelvin, below the amorphous limit while preserving the crystalline structure. These findings are supported by molecular dynamics simulations that account for the film thickness, porosity, and temperature. We demonstrate the approach efficiency by fabricating suspended heat-routing structures that effectively confine and guide heat flow in prespecified directions. This study underpins the immense potential of layered materials as directional heat spreaders, thermal insulators, and active components for thermoelectric devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring dielectric properties in atomistic models of amorphous boron nitride

  • Galvani, Thomas|||0000-0002-5180-2367
  • Hamze, Ali K.|||0000-0002-5246-1728
  • Caputo, Laura|||0000-0003-0185-9442
  • Kaya, Onurcan|||0000-0002-5814-5486
  • Dubois, Simon M.M.|||0000-0003-2565-859X
  • Colombo, Luigi|||0000-0002-9048-3565
  • Nguyen, Viet-Hung|||0000-0001-6729-3520
  • Shin, Yongwoo|||0000-0001-7760-9883
  • Shin, Hyeon-Jin|||0000-0002-6992-6341
  • Charlier, Jean Christophe|||0000-0002-5749-1328
  • Roche, Stephan|||0000-0003-0323-4665
We report a theoretical study of dielectric properties of models of amorphous Boron Nitride, using interatomic potentials generated by machine learning. We first perform first-principles simulations on small (about 100 atoms in the periodic cell) sample sizes to explore the emergence of mid-gap states and its correlation with structural features. Next, by using a simplified tight-binding electronic model, we analyse the dielectric functions for complex three dimensional models (containing about 10.000 atoms) embedding varying concentrations of sp, sp and sp bonds between B and N atoms. Within the limits of these methodologies, the resulting value of the zero-frequency dielectric constant is shown to be influenced by the population density of such mid-gap states and their localization characteristics. We observe nontrivial correlations between the structure-induced electronic fluctuations and the resulting dielectric constant values. Our findings are however just a first step in the quest of accessing fully accurate dielectric properties of as-grown amorphous BN of relevance for interconnect technologies and beyond.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-step ALD process for non-oxide ceramic deposition, the example of boron nitride

  • Hossain, Ali|||0000-0001-6201-5978
  • Souvignet, Thomas
  • Innis, Neil R.
  • Hao, Wenjun|||0000-0003-2772-7608
  • Boisron, Olivier
  • Florea, Ileana
  • Xiao, Peng|||0000-0002-4711-2566
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Journet, Catherine|||0000-0002-3328-317X
  • Marichy, Catherine|||0000-0002-5730-2398
Atomic layer deposition (ALD) based on polymer-derived ceramics (PDCs) chemistry is used for the fabrication of boron nitride thin films from reaction between trichloroborazine and hexamethyldisilazane. The transposition of the PDCs route to ALD is highly appealing for depositing ceramics, especially non-oxide ones, as it offers various molecular precursors. From a two-step approach composed of an ALD process forming a so-called preceramic film and its subsequent ceramization, conformal and homogenous BN layers are successfully synthesized on various inorganic substrates. In the first stage, smooth polyborazine coatings are obtained at a temperature as low as 90 °C. The saturation and self-limitation of the ALD gas-surface reactions are verified. Intriguingly, three ALD windows seem to exist and are attributed to change in ligand exchange. After the ceramization stage using a heat treatment, conformal near-stoichiometric BN layers are obtained. Their structure in terms of crystallinity can be adjusted from amorphous to well-crystalline sp phase by controlling the treatment temperature. In particular, a crystallization onset occurs at 1000 °C and well defined sp crystalline planes oriented parallel to the surface are noted after ceramization at 1350 °C. Finally, side-modification of the substrate surface induced by the thermal treatment appears to impact on the final BN topography and defect generation.