Pasar al contenido principal

ESTUDIO DE MATERIALES DE BAJA DIMENSIONALIDAD PARA UNA GESTION TERMICA Y RECUPERACION DE ENERGIA EFICIENTE

PID2023-152783OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura|||0000-0002-9875-2774
  • Xiao, Peng|||0000-0002-4711-2566
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Yang, Jia Qi
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Sledzinska, Marianna|||0000-0001-8592-1121
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone|||0009-0000-0389-727X
  • Ma, Zheng|||0000-0003-3655-1448
  • Gómez-Torres, Hugo|||0000-0002-2857-7974
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Tan, Huan|||0000-0002-5579-2127
  • Solsona, Pau|||0000-0001-9274-2447
  • Quintana, Alberto|||0000-0002-9813-735X
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer Nahuel|||0000-0002-3610-6822
  • Ravelosona, Dafiné
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura
  • Xiao, Peng
  • Esplandiú, María J.
  • Yang, JiaQi
  • Navarro-Urrios, D.
  • Rodríguez-Viejo, Javier
  • Sledzinska, Marianna
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. This work was supported by the MICINN projects MOCCASIN-2D (Grants No. TED2021-132040B-C21; TED2021-132040B-C22), TED-2021-129898B-C21 and PID 2021-124568NB-I00. This work was supported by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. and M.J.E. acknowledge support from ICN2 Seed Fund Project STRIDE-MoD. J.R.-V acknowledges support from 2021SGR-00644 funded by AGAUR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neural-Network-Assisted Impedance Analysis for Humidity and Ammonia Detection Using MXene and PtSnO2 Sensors with Cross-Interference Suppression

  • Prakasha, Bharath Somalapura
  • Kumar, Amit
  • Mishra, Jai
  • Tan, Pu
  • Wang, Chenglin
  • Rodríguez-Viejo, Javier
  • Kumar, Mahesh
  • Sledzinska, Marianna
Nonlinearity, baseline drift, humidity interference, and selectivity are among the primary challenges associated with direct current measurements in semiconducting gas sensors today. This study demonstrates that integrating PtSnO2 and MXene-based sensors enables high-performance gas sensing by effectively mitigating humidity-induced interference. Impedance measurements across multiple frequencies were employed, yielding sensors with tunable gas responses, low noise, extended dynamic range, enhanced baseline stability, and minimal humidity cross-sensitivity. PtSnO2 was optimized for simultaneous NH3 and relative humidity (RH) detection, while MXene served as a dedicated RH sensor. A multilayer perceptron was trained on the impedance dataset to deconvolute and accurately predict RH and NH3 concentrations. The proposed sensor system and analytical framework were benchmarked against commercial DHT22 (humidity) and DFrobot (NH3) sensors, demonstrating superior performance and sensitivity. This methodology is extendable to other material systems, including metal oxides and transition metal dichalcogenides, for advanced gas-sensing applications. These findings advance gas-sensing technology by improving detection accuracy and robustness in industrial safety, environmental monitoring, and biomedical diagnostics, including early disease detection., This work was supported by the MICINN project MOCCASIN-2D (Grant No. TED2021-132040B-C22) and by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. acknowledges support from the ICN2 Seed Fund Project STRIDE-MoD. J.R.V. acknowledges 2021SGR-00644 funded by AGAUR. ICN2 was supported by the Severo Ochoa Centres of Excellence Program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. Authors thank Damaso Torres for preparing the artwork for publication., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness-dependent thermoelectric characterization of 2D SnSe2 on a micro-chip platform

  • Xiao, Peng
  • Aubergier, Nathan
  • Chávez-Angel, Emigdio
  • Maire, Jeremie
  • Sachat, Alexandros el
  • Chessel, Nolwenn
  • Tainoff, Dimitri
  • Sotomayor Torres, C. M.
  • Sledzinska, Marianna
  • Dilhaire, Stefan
  • Bourgeois, Olivier
Investigating the temperature dependence of the Seebeck coefficient in low-dimensional materials provides an effective means to uncover how crystallinity, size, and thickness influence thermoelectric performance. Such insights are crucial for advancing large-scale thermoelectric devices and Seebeck-based sensors. To enhance measurement precision and efficiency, we developed a microchip platform specifically tailored for accurate Seebeck coefficient measurements in low-dimensional systems. The chip accommodates a broad range of samples, including both polycrystalline thin films (chemically or physically deposited) and mechanically exfoliated two-dimensional (2D) crystals. It integrates micro-heaters, temperature sensors, and voltage electrodes, enabling the generation of controlled in-plane temperature gradients and the simultaneous measurement of the induced Seebeck voltage (ΔV). Finite-element simulations support the formation of stable and tunable temperature differences across the chip. To validate the platform, we first measured Bi<inf>2</inf>Te<inf>3</inf>-based thin films, obtaining Seebeck coefficients consistent with reported literature values, thereby confirming the accuracy and robustness of the setup. Subsequently, mechanically exfoliated crystalline SnSe<inf>2</inf> flakes were investigated. Their Seebeck coefficient exhibited clear dependencies on both thickness and temperature, the absolute value increasing from −349 ± 20 μV/K at 100 K to −521 ± 10 μV/K at 300 K in a 198 nm-thick sample. These findings highlight the strong influence of dimensionality on thermoelectric transport in SnSe<inf>2</inf>. Overall, this work establishes a versatile platform for evaluating emerging 2D materials and their heterostructures, facilitating both fundamental research and the engineering of efficient 2D material-based thermoelectric devices., P.X. acknowledges support from the Barcelona Recerca Jove I Emergent Convocatoria 2022—LEONINE project (Grant No. 22S09495-001), the EU Marie Skłodowska-Curie COFUND PREBIST program (Grant No. 754558). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) was funded by the CERCA program/Generalitat de Catalunya and was supported by the Severo Ochoa Centres of Excellence Programme, Grant No. CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. M.S. acknowledges support from PID2023-152783OB-I00 by MICIU and PCI2021-122092-2A funded by MCIN/AEI/10.13039-501100011033 and by the European Union NextGenerationEU/PRTR. This work was also supported by ANR-22-CE09-CO35 through the project NEXTOP. This project has received funding from the European Union's Horizon Europe research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101107155 (Carmen). This work was co-funded by the European Union (ERC, TheMA, 101117958). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone
  • Ma, Zheng
  • Gómez-Torres, Hugo
  • Arredondo-López, Aitor
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Tan, Huan
  • Solsona, Pau
  • Quintana, Alberto
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer
  • Ravelosona, Dafiné
  • Valle, Nuria del
  • Navau, Carles
  • Lopeandía, Aitor
  • Sort, Jordi
  • Menéndez, Enric
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices., Financial support by the DOCFAM-PLUS project, which has received funding from the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie Actions 2021 COFUND scheme (Grant Agreement No. 101081337), NICKEFFECT (Grant Agreement No. 101058076), the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant N° 101054687 and 2024-ERC-Proof of Concept ‘SECURE-FLEXIMAG’ Grant N° 101204328), the Spanish Government (PID2024-156385OB-I00 and PID2023-152783OB-I00), the Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00644), and the MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant N° CNS2022-135230) is acknowledged. H.G-T. acknowledges support from the Spanish Ministry of Science and Innovation through the FPI fellowship PRE2021-097883. The authors thank ICTS-SB-CSIC, which is part of the ICTs Micronanofabs node supported by the Spanish Ministry of Science, Innovation and Universities (MICIU). We also gratefully acknowledge financial support from the Horizon Europe program (EIC Pathfinder METASPIN (101098651)). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214 S, funded by MCIU/AEI/10.13039.501100011033. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding Grant IU16-014206 (METCAM-FIB) to ICN2, with the support of Ministry of Research and University, Generalitat de Catalunya. Parts of this research were carried out at ELBE at the Helmholtz-Zentrum Dresden–Rossendorf e. V., a member of the Helmholtz Association. E.M. is a Serra Húnter Fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed