Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura|||0000-0002-9875-2774
  • Xiao, Peng|||0000-0002-4711-2566
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Yang, Jia Qi
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Sledzinska, Marianna|||0000-0001-8592-1121
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cascaded injection locking of optomechanical crystal oscillators

  • Alonso-Tomás, David
  • Arregui, Guillermo
  • Capuj, Nestor E.
  • Navarro-Urrios, Daniel
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Griol Barres, Amadeu
[EN] Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, therefore increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities acting as optomechanical oscillators to an external reference signal that subtly modulates the laser driving only one of them. In contrast to most previous implementations, both cavities support isolated optical resonances and interact by a weak mechanical interconnection. This configuration allows one cavity to be used for probing the mechanical perturbation generated by the oscillator that receives the external forcing. The combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon¿photon hybrid circuits., This work was supported by the MICINN projects ALLEGRO (Grants Nos. PID2021-124618NB-C22 and PID2021-124618NB-C21) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). D.A.-T. acknowledges the financial support of the Generalitat de Catalunya through Grant No. AGAUR FI-SDUR 2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimode Phonon Lasing via Self-Induced Optical Coherent Pumping

  • Alonso Tomás, David
  • Capuj, Nestor E.
  • Navarro Urrios, Daniel
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Multimode phonon lasing in cavity optomechanical systems enables the generation of coherent, multi-frequency mechanical signals with potential applications in RF signal processing, frequency combs, and sensing. However, achieving simultaneous self-sustained oscillations in multiple mechanical modes is often hindered by strong mode competition. Here, we demonstrate robust multimode phonon lasing in a silicon optomechanical nanobeam, driven by a self-pulsing (SP) mechanism originating from free-carrier dispersion and thermo-optic effects. Unlike previous approaches that rely on external pump modulation or the use of widely spectrally separated modes to mitigate the suppression of self-oscillations, our system supports lasing of two strongly competing in-plane flexural modes of the nanobeam under continuous-wave pumping. The SP cycle dynamically adapts to the mechanical perturbations, providing synchronized optical pumping even in the absence of harmonic frequency relations. This results in stable multimode operation across periodic, quasi-periodic, and chaotic regimes, all accurately predicted by numerical modeling. These findings establish SP as a passive and self-organized mechanism for coherent multi-frequency phonon generation in chip-scale platforms., This work was supported by the MCINN through the projects ALLEGRO (Grants No. PID2021-124618NB-C22 and PID2021-124618NB-C21), MOCCASIN-2D (Grant No. TED2021-132040B-C21), and an FPU fellowship (Grant No. FPU23/00690) awarded to D.A.T.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unidirectional Synchronization of Silicon Optomechanical Nanobeam Oscillators by External Feedback

  • Alonso-Tomás, David
  • Capuj, Nestor E.
  • Navarro-Urrios, Daniel
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a unidirectional type of synchronization between two self-sustained optomechanical crystal oscillators that interact solely through an external optical feedback stage. Several pieces of experimental evidence rule out the possibility of resonant forcing and, in contrast to previous works, indicate that synchronization is achieved in the regime of natural dynamics suppression. Our experimental results are in agreement with the predictions of a numerical model describing the specific mechanical lasing dynamics of each oscillator and the unidirectional interaction between them. The outcomes of our study pave the way toward the synchronization of clock signals corresponding to far-placed processing elements in a future synchronous photonic integrated circuit., This work was supported by the MICINN Projects ALLEGRO (Grant Nos. PID2021-124618NB-C22 and PID2021- 124618NB-C21) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). A.M. acknowledges funding from the Generalitat Valenciana under Grants IDIFEDER/2020/ 041 and IDIFEDER/2021/061.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie
  • Necio, Tomasz
  • Chávez-Angel, Emigdio
  • Colombano, Martin F.
  • Jaramillo-Fernandez, Juliana
  • Sotomayor Torres, C. M.
  • Capuj, Néstor E.
  • Navarro-Urrios, D.
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless techniques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed., This work was supported by the MICINN projects ALLEGRO (Grant No. PID2021-124618NB-C22) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). TN acknowledges the support of the European Commission through the Erasmus + program. J.M., E.C.A., M.F.C., and C.M.S.T. acknowledge the support of the Spanish projects S. Ochoa 2017-0706, MINECO Project No. FIS2015-70862-P, and the SGR Project No. SGR1238. J.M. and C.M.S.T. acknowledge support by the EC Future Emerging Technologies project Grant Agreement No. 753450 (PHENOMEN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura
  • Xiao, Peng
  • Esplandiú, María J.
  • Yang, JiaQi
  • Navarro-Urrios, D.
  • Rodríguez-Viejo, Javier
  • Sledzinska, Marianna
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. This work was supported by the MICINN projects MOCCASIN-2D (Grants No. TED2021-132040B-C21; TED2021-132040B-C22), TED-2021-129898B-C21 and PID 2021-124568NB-I00. This work was supported by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. and M.J.E. acknowledge support from ICN2 Seed Fund Project STRIDE-MoD. J.R.-V acknowledges support from 2021SGR-00644 funded by AGAUR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie|||0000-0002-9921-4804
  • Necio, Tomasz|||0000-0002-0232-1698
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Colombano, Martín F.
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless techniques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed.