Pasar al contenido principal

TOWARDS ALL-OPTICAL SENSING AND SIGNAL PROCESSING USING CAVITY AND MOLECULAR OPTOMECHANICS

PID2021-124618NB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Giant injection-locking bandwidth of a self-pulsing limit-cycle in an optomechanical cavity

  • Navarro-Urrios, Daniel
  • Arregui, Guillermo
  • Colombano, Martín F.
  • Jaramillo-Fernández, Juliana
  • Pitanti, Alessandro
  • Capuj, Néstor E.
  • Griol Barres, Amadeu
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Locking of oscillators to ultra-stable external sources is of paramount importance for improving close-to-carrier phase noise in free running oscillators. In most of them, such as Micro-Electro-Mechanical-Systems or LC circuit-based oscillators, the locking frequency range is limited by the robustness of their natural frequency, which comes explicitly related with intrinsic parameters of the system. In this work we report the synchronization of an optically-driven self-pulsing limit-cycle taking place in a silicon optomechanical crystal cavity to an external harmonic signal that modulates the driving laser. Because of the extreme ductility of the natural self-pulsing frequency (several tens of MHz), the injection-locking mechanism is highly efficient and displays giant relative bandwidths exceeding 60%. The external modulation reveals itself as a knob to explore dynamical attractors that are otherwise elusive and, in particular, as a means to initialize a mechanical resonator into a state of self-sustained oscillations driven by radiation pressure forces. Moreover, we exploit the large anharmonicity of the studied limit-cycle to induce injection-locking to integer multiples and fractions of the frequency of the external reference, which can be used for frequency conversion purposes in nano-electro-opto-mechanical systems., This work was supported by the MICINN project ALLEGRO (PID2021-124618NB-C21 and PID2021-124618NB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cascaded injection locking of optomechanical crystal oscillators

  • Alonso-Tomás, David
  • Arregui, Guillermo
  • Capuj, Nestor E.
  • Navarro-Urrios, Daniel
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Griol Barres, Amadeu
[EN] Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, therefore increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities acting as optomechanical oscillators to an external reference signal that subtly modulates the laser driving only one of them. In contrast to most previous implementations, both cavities support isolated optical resonances and interact by a weak mechanical interconnection. This configuration allows one cavity to be used for probing the mechanical perturbation generated by the oscillator that receives the external forcing. The combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon¿photon hybrid circuits., This work was supported by the MICINN projects ALLEGRO (Grants Nos. PID2021-124618NB-C22 and PID2021-124618NB-C21) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). D.A.-T. acknowledges the financial support of the Generalitat de Catalunya through Grant No. AGAUR FI-SDUR 2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimode Phonon Lasing via Self-Induced Optical Coherent Pumping

  • Alonso Tomás, David
  • Capuj, Nestor E.
  • Navarro Urrios, Daniel
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Multimode phonon lasing in cavity optomechanical systems enables the generation of coherent, multi-frequency mechanical signals with potential applications in RF signal processing, frequency combs, and sensing. However, achieving simultaneous self-sustained oscillations in multiple mechanical modes is often hindered by strong mode competition. Here, we demonstrate robust multimode phonon lasing in a silicon optomechanical nanobeam, driven by a self-pulsing (SP) mechanism originating from free-carrier dispersion and thermo-optic effects. Unlike previous approaches that rely on external pump modulation or the use of widely spectrally separated modes to mitigate the suppression of self-oscillations, our system supports lasing of two strongly competing in-plane flexural modes of the nanobeam under continuous-wave pumping. The SP cycle dynamically adapts to the mechanical perturbations, providing synchronized optical pumping even in the absence of harmonic frequency relations. This results in stable multimode operation across periodic, quasi-periodic, and chaotic regimes, all accurately predicted by numerical modeling. These findings establish SP as a passive and self-organized mechanism for coherent multi-frequency phonon generation in chip-scale platforms., This work was supported by the MCINN through the projects ALLEGRO (Grants No. PID2021-124618NB-C22 and PID2021-124618NB-C21), MOCCASIN-2D (Grant No. TED2021-132040B-C21), and an FPU fellowship (Grant No. FPU23/00690) awarded to D.A.T.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering Multiple GHz Mechanical Modes in Optomechanical Crystal Cavities

  • Mercadé, Laura|||0000-0002-4994-7727
  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Grau-Martínez, Alberto|||0000-0002-2411-1317
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Navarro-Urrios, Daniel
[EN] Optomechanical crystal cavities (OMCCs) are fundamental nanostructures for a wide range of phenomena and applications. Usually, optomechanical interaction in such OMCCs is limited to a single optical mode and a unique mechanical mode. In this sense, eliminating the single-mode constraint¿for instance, by adding more mechanical modes¿should enable more complex physical phenomena, giving rise to a context of multimode optomechanical interaction. However, a general method to produce in a controlled way multiple mechanical modes with large coupling rates in OMCCs is still missing. In this work, we present a route to confine multiple GHz mechanical modes coupled to the same optical field with similar optomechanical coupling rates¿up to 400 kHz¿by OMCC engineering. In essence, we increase the number of unit cells (consisting of a silicon nanobrick perforated by circular holes with corrugations at both its sides) in the adiabatic transition between the cavity center and the mirror region. Remarkably, the mechanical modes in our cavities are located within a full phononic band gap, which is a key requirement to achieve ultrahigh mechanical Q factors at cryogenic temperatures. The multimode behavior in a full phononic band gap and the easiness of realization using standard silicon nanotechnology make our OMCCs highly appealing for applications in the classical and quantum realms., The authors acknowledge funding from the Spanish State Research Agency (Grants No. PID2021- 124618NB-C21 and No. PID2021-124618NB-C22) ; Generalitat Valenciana (Grants No. BEST/2020/178, No. PROMETEO/2019/123, No. IDIFEDER/2020/041, and No. IDIFEDER/2021/061). L.M. is grateful for financial support from the Next Generation EU program, Ministerio de Universidades (Gobierno de Espana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unidirectional Synchronization of Silicon Optomechanical Nanobeam Oscillators by External Feedback

  • Alonso-Tomás, David
  • Capuj, Nestor E.
  • Navarro-Urrios, Daniel
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a unidirectional type of synchronization between two self-sustained optomechanical crystal oscillators that interact solely through an external optical feedback stage. Several pieces of experimental evidence rule out the possibility of resonant forcing and, in contrast to previous works, indicate that synchronization is achieved in the regime of natural dynamics suppression. Our experimental results are in agreement with the predictions of a numerical model describing the specific mechanical lasing dynamics of each oscillator and the unidirectional interaction between them. The outcomes of our study pave the way toward the synchronization of clock signals corresponding to far-placed processing elements in a future synchronous photonic integrated circuit., This work was supported by the MICINN Projects ALLEGRO (Grant Nos. PID2021-124618NB-C22 and PID2021- 124618NB-C21) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). A.M. acknowledges funding from the Generalitat Valenciana under Grants IDIFEDER/2020/ 041 and IDIFEDER/2021/061.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie
  • Necio, Tomasz
  • Chávez-Angel, Emigdio
  • Colombano, Martin F.
  • Jaramillo-Fernandez, Juliana
  • Sotomayor Torres, C. M.
  • Capuj, Néstor E.
  • Navarro-Urrios, D.
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless techniques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed., This work was supported by the MICINN projects ALLEGRO (Grant No. PID2021-124618NB-C22) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). TN acknowledges the support of the European Commission through the Erasmus + program. J.M., E.C.A., M.F.C., and C.M.S.T. acknowledge the support of the Spanish projects S. Ochoa 2017-0706, MINECO Project No. FIS2015-70862-P, and the SGR Project No. SGR1238. J.M. and C.M.S.T. acknowledge support by the EC Future Emerging Technologies project Grant Agreement No. 753450 (PHENOMEN)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie
  • Necio, Tomasz
  • Chavez Angel, Emigdio|||0000-0002-9783-0806
  • Colombano, M.F
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Sotomayor Torres, Clivia M.
  • Capuj, N.E.
  • Navarro Urrios, Daniel
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless tech- niques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed., This work was supported by the MICINN projects ALLE- GRO (Grant No. PID2021-124618NB-C22) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). TN acknowledges the support of the European Commission through the Erasmus + program. J.M., E.C.A., M.F.C., and C.M.S.T. acknowledge the support of the Span- ish projects S. Ochoa 2017-0706, MINECO Project No. FIS2015- 70862-P, and the SGR Project No. SGR1238. J.M. and C.M.S.T. acknowledge support by the EC Future Emerging Technologies project Grant Agreement No. 753450 (PHENOMEN).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie
  • Necio, Tomasz
  • Chavez Angel, Emigdio
  • Colombano, M.F
  • Jaramillo Fernández, Juliana
  • Sotomayor Torres, Clivia M.
  • Capuj, N.E.
  • Navarro Urrios, Daniel
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless tech- niques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed., This work was supported by the MICINN projects ALLE- GRO (Grant No. PID2021-124618NB-C22) and MOCCASIN-2D (Grant No. TED2021-132040B-C21). TN acknowledges the support of the European Commission through the Erasmus + program. J.M., E.C.A., M.F.C., and C.M.S.T. acknowledge the support of the Span- ish projects S. Ochoa 2017-0706, MINECO Project No. FIS2015- 70862-P, and the SGR Project No. SGR1238. J.M. and C.M.S.T. acknowledge support by the EC Future Emerging Technologies project Grant Agreement No. 753450 (PHENOMEN)., Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Contactless characterization of the elastic properties of glass microspheres

  • Maire, Jeremie|||0000-0002-9921-4804
  • Necio, Tomasz|||0000-0002-0232-1698
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Colombano, Martín F.
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
Glass microspheres are of great interest for numerous industrial, biomedical, or standalone applications, but it remains challenging to evaluate their elastic and optical properties in a non-destructive way. In this work, we address this issue by using two complementary contactless techniques to obtain elastic and optical constants of glass microspheres with diameters ranging from 10 to 60 µm. The first technique we employ is Brillouin Light Scattering, which yields scattering with longitudinal acoustic phonons, the frequency of which is found to be 5% lower than that measured in the bulk material. The second technique involves exciting the optical whispering gallery modes of the microspheres, which allows us to transduce some of their vibrational modes. The combined data allow for extracting the refractive index and the elastic constants of the material. Our findings indicate that the values of those properties are reduced with respect to their bulk material counterpart due to an effective decrease of the density, resulting from the fabrication process. We propose the use of this combined method to extract elastic and optical parameters of glass materials in microsphere geometries and compare them with the values of the pristine material from which they are formed.