Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura|||0000-0002-9875-2774
  • Xiao, Peng|||0000-0002-4711-2566
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Yang, Jia Qi
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Sledzinska, Marianna|||0000-0001-8592-1121
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura
  • Xiao, Peng
  • Esplandiú, María J.
  • Yang, JiaQi
  • Navarro-Urrios, D.
  • Rodríguez-Viejo, Javier
  • Sledzinska, Marianna
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. This work was supported by the MICINN projects MOCCASIN-2D (Grants No. TED2021-132040B-C21; TED2021-132040B-C22), TED-2021-129898B-C21 and PID 2021-124568NB-I00. This work was supported by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. and M.J.E. acknowledge support from ICN2 Seed Fund Project STRIDE-MoD. J.R.-V acknowledges support from 2021SGR-00644 funded by AGAUR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neural-Network-Assisted Impedance Analysis for Humidity and Ammonia Detection Using MXene and PtSnO2 Sensors with Cross-Interference Suppression

  • Prakasha, Bharath Somalapura
  • Kumar, Amit
  • Mishra, Jai
  • Tan, Pu
  • Wang, Chenglin
  • Rodríguez-Viejo, Javier
  • Kumar, Mahesh
  • Sledzinska, Marianna
Nonlinearity, baseline drift, humidity interference, and selectivity are among the primary challenges associated with direct current measurements in semiconducting gas sensors today. This study demonstrates that integrating PtSnO2 and MXene-based sensors enables high-performance gas sensing by effectively mitigating humidity-induced interference. Impedance measurements across multiple frequencies were employed, yielding sensors with tunable gas responses, low noise, extended dynamic range, enhanced baseline stability, and minimal humidity cross-sensitivity. PtSnO2 was optimized for simultaneous NH3 and relative humidity (RH) detection, while MXene served as a dedicated RH sensor. A multilayer perceptron was trained on the impedance dataset to deconvolute and accurately predict RH and NH3 concentrations. The proposed sensor system and analytical framework were benchmarked against commercial DHT22 (humidity) and DFrobot (NH3) sensors, demonstrating superior performance and sensitivity. This methodology is extendable to other material systems, including metal oxides and transition metal dichalcogenides, for advanced gas-sensing applications. These findings advance gas-sensing technology by improving detection accuracy and robustness in industrial safety, environmental monitoring, and biomedical diagnostics, including early disease detection., This work was supported by the MICINN project MOCCASIN-2D (Grant No. TED2021-132040B-C22) and by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. acknowledges support from the ICN2 Seed Fund Project STRIDE-MoD. J.R.V. acknowledges 2021SGR-00644 funded by AGAUR. ICN2 was supported by the Severo Ochoa Centres of Excellence Program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. Authors thank Damaso Torres for preparing the artwork for publication., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed