Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura|||0000-0002-9875-2774
  • Xiao, Peng|||0000-0002-4711-2566
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Yang, Jia Qi
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Sledzinska, Marianna|||0000-0001-8592-1121
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bringing satellite and nanotechnologies together: unifying strengths against pollution and climate change

  • Ferral, Anabella
  • Bonansea, Matías
  • Scavuzzo, Carlos Marcelo
  • Nemiña, Francisco
  • Burgos Paci, Maximiliano
  • Ramírez, Jéssica Casandra
  • Sepúlveda, Borja
  • Fraxedas, J.
  • Esplandiú, María J.
Nowadays, we witness remarkable technological progress alongside unprecedented challenges that threaten the delicate balance of our planet’s ecological system. Environmental contamination plays a central role in this, with rapid urbanization, industrialization, mining and agricultural practices intensifying the introduction of pollutants into the environment. This article highlights the potential synergy between two fields operating at vastly different scales: satellite technology and nanotechnology. This article delves into the offerings of each of these disciplines and examines how they can mutually contribute to the detection, prevention and mitigation of environmental pollution. Satellites play a crucial role in identifying and monitoring large-scale polluted areas, offering comprehensive insights into environmental challenges. They are indispensable in tracking air, water pollution levels, assessing land degradation, and monitoring changes in ocean health with relatively high spatial and temporal resolution. Nanotechnology leverages the unique properties of materials at sub-micron scale by offering amplified chemical reactivity and new optical, electronic, and magnetic attributes, enabling selective and sensitive sensors and rapid and efficient contaminant capture/degradation strategies. Emerging nanomaterials, along with nature-inspired and self-powered or self-sustaining designs, broaden capabilities for efficient solutions. Advanced nanocharacterization techniques deepen material understanding and quantification, while nanofabrication allows precise design of functional nano-devices. We believe the synergistic relationship between both fields can yield cooperative solutions, expediting effective measures and greatly influencing policy decisions. This article advocates for the collaboration between these two disciplines to foster impactful progress in facing global challenges., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contracts No. PID 2021-124568NB-I00 and TED 2021-129898B-C21 and by CONICET grant PIBBA-2022–2023 (No 28720210100854CO), ITAREO project (Resol 2020-337-APN-MCT), MinCyT (Convocatoria Argentina Contra el Hambre 2020) and FONCyT (PICT-2021-GRF-TII00393) The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX 2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near-IR Photoinduced Electrochemiluminescence Imaging with Structured Silicon Photoanodes

  • Zhao, Yiran
  • Sépulveda, Borja
  • Descamps, Julie
  • Faye, Fatoumata
  • Duque, Marcos
  • Esteve, Jaume
  • Santinacci, Lionel
  • Sojic, Neso
  • Loget, Gabriel
  • Léger, Yoan
Infrared (IR) imaging devices that convert IR irradiation (invisible to the human eye) to a visible signal are based on solid-state components. Here, we introduce an alternative concept based on light-addressable electrochemistry (i.e., electrochemistry spatially confined under the action of a light stimulus) that involves the use of a liquid electrolyte. In this method, the projection of a near-IR image (λexc = 850 or 840 nm) onto a photoactive Si-based photoanode, immersed into a liquid phase, triggers locally the photoinduced electrochemiluminescence (PECL) of the efficient [Ru(bpy)3]2+-TPrA system. This leads to the local conversion of near-IR light to visible (λPECL = 632 nm) light. We demonstrate that compared to planar Si photoanodes, the use of a micropillar Si array leads to a large enhancement of local light generation and considerably improves the resolution of the PECL image by preventing photogenerated minority carriers from diffusing laterally. These results are important for the design of original light conversion devices and can lead to important applications in photothermal imaging and analytical chemistry., This work was funded by ANR (LiCORN, ANR-20-CE29-0006). Loic Joanny and Francis Gouttefangeas (ScanMat/CMEBA) are acknowledged for SEM. The XPS platform and Dr. Corinne Lagrost (Univ Rennes, CNRS, ScanMat), UAR2025, are acknowledged for XPS analysis. The NanoRennes platform and Renatech + network are acknowledged for additional clean room processing. We acknowledge the financial support from the projects PID2022-138588OB-C31 and TED2021-129898B-C21funded by MCIN/AEI/10.13039/501100011033 and by EU Next GenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Technology Roadmap of Micro/Nanorobots

  • Ju, Xiaohui
  • Chen, Chuanrui
  • Oral, Cagatay M.
  • Sevim, Semih
  • Golestanian, Ramin
  • Sun, Mengmeng
  • Bouzari, Negin
  • Lin, Xiankun
  • Urso, Mario
  • Nam, Jong Seok
  • Cho, Yujang
  • Peng, Xia
  • Landers, Fabian C.
  • Yang, Shihao
  • Adibi, Azin
  • Taz, Nahid
  • Wittkowski, Raphael
  • Ahmed, Daniel
  • Wang, Wei
  • Magdanz, Veronika
  • Medina-Sánchez, Mariana
  • Guix, María
  • Bari, Naimat
  • Behkam, Bahareh
  • Kapral, Raymond
  • Huang, Yaxin
  • Tang, Jinyao
  • Wang, Ben
  • Morozov, Konstantin
  • Leshansky, Alexander
  • Abbasi, Sarmad Ahmad
  • Choi, Hongsoo
  • Ghosh, Subhadip
  • Borges Fernandes, Bárbara
  • Battaglia, Giuseppe
  • Fischer, Peer
  • Ghosh, Ambarish
  • Jurado Sánchez, Beatriz
  • Escarpa, Alberto
  • Martinet, Quentin
  • Palacci, Jérémie
  • Lauga, Eric
  • Moran, Jeffrey
  • Ramos, Miguel A.
  • Städler, Brigitte
  • Herrera Restrepo, Ramón Santiago
  • Yossifon, Gilad
  • Nicholas, James D.
  • Ignés-Mullol, Jordi
  • Puigmartí Luis, Josep
  • Liu, Yutong
  • Zarzar, Lauren D.
  • Shields, C. Wyatt
  • Li, Longqiu
  • Li, Shanshan
  • Ma, Xing
  • Gracias, David H.
  • Velev, Orlin
  • Sánchez, Samuel
  • Esplandiú, María J.
  • Simmchen, Juliane
  • Lobosco, Antonio
  • Misra, Sarthak
  • Wu, Zhiguang
  • Li, Jinxing
  • Kuhn, Alexander
  • Nourhani, Amir
  • Maric, Tijana
  • Xiong, Ze
  • Aghakhani, Amirreza
  • Mei, Yongfeng
  • Tu, Yingfeng
  • Peng, Fei
  • Diller, Eric
  • Sakar, Mahmut Selman
  • Sen, Ayusman
  • Law, Junhui
  • Sun, Yu
  • Pena-Francesch, Abdon
  • Villa, Katherine
  • Li, Huaizhi
  • Fan, Donglei Emma
  • Liang, Kang
  • Huang, Tony Jun
  • Chen, Xiang-Zhong
  • Tang, Songsong
  • Zhang, Xueji
  • Cui, Jizhai
  • Wang, Hong
  • Gao, Wei
  • Kumar Bandari, Vineeth
  • Schmidt, Oliver G.
  • Wu, Xianghua
  • Guan, Jianguo
  • Sitti, Metin
  • Nelson, Bradley J.
  • Pané, Salvador
  • Zhang, Li
  • Shahsavan, Hamed
  • He, Qiang
  • Kim, Il-Doo
  • Wang, Joseph
  • Pumera, Martin
Inspired by Richard Feynman's 1959 lecture and the 1966 film Fantastic Voyage, the field of micro/nanorobots has evolved from science fiction to reality, with significant advancements in biomedical and environmental applications. Despite the rapid progress, the deployment of functional micro/nanorobots remains limited. This review of the technology roadmap identifies key challenges hindering their widespread use, focusing on propulsion mechanisms, fundamental theoretical aspects, collective behavior, material design, and embodied intelligence. We explore the current state of micro/nanorobot technology, with an emphasis on applications in biomedicine, environmental remediation, analytical sensing, and other industrial technological aspects. Additionally, we analyze issues related to scaling up production, commercialization, and regulatory frameworks that are crucial for transitioning from research to practical applications. We also emphasize the need for interdisciplinary collaboration to address both technical and nontechnical challenges, such as sustainability, ethics, and business considerations. Finally, we propose a roadmap for future research to accelerate the development of micro/nanorobots, positioning them as essential tools for addressing grand challenges and enhancing the quality of life., The content is solely the responsibility of the authors and does not necessarily represent the official views of the funding agencies. Martin Pumera acknowledges the financial support of Grant Agency of the Czech Republic (EXPRO: 25-15484X). Xiaohui Ju, Xia Peng and Cagatay M. Oral acknowledge ERDF/ESF project TECHSCALE (No. CZ.02.01.01/00/22_008/0004587) for financial support. Xiaohui Ju acknowledges the financial support from Czech Grant Agency GACR standard grant No. 25-15996S. Salvador Pane, Fabian Landers and Semih Sevim acknowledge funding from the European Union's Horizon 2020 Proactive Open program under FETPROACT-EIC-05-2019 ANGIE (No. 952152) and the European Union’s Horizon Europe Research and Innovation Programme under the EVA project (GA no. 101047081).Li Zhang acknowledges funding support from the Hong Kong Research Grants Council (RGC) with grant numbers R4015-2, RFS2122-4S03, and STG1/E-401/23-N. Hamed Shahsavan acknowledges Natural Sciences and Engineering Research Council of Canada (NSERC). Cagatay M. Oral and Hamed Shahsavan were in part funded by the WIN-CEITEC BUT Joint Seed Funding Program. Qiang He and Xiankun Lin acknowledge the National Natural Science Foundation of China (22193033, U22A20346) and Heilongjiang Provincial Key R&D Program (2022ZX02C23) for providing financial support. Il-Doo Kim acknowledges the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS-2024-00435493). Ramin Golestanian acknowledges support from the Max Planck School Matter to Life and the MaxSynBio Consortium which are jointly funded by the Federal Ministry of Education and Research (BMBF) of Germany and the Max Planck Society. Bradley J. Nelson and Semih Sevim acknowledge funding from the Swiss National Science Foundation under SNSF-Sinergia project no. 198643. Raphael Wittkowski is funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) − 535275785. Daniel Ahmed acknowledges the support provided by the European Research Council, as part of the European Union’s Horizon 2020 research and innovation program (grant agreement 853309, SONOBOTS) and Swiss National Science Foundation (SNSF) under the SNSF Project funding MINT 2022 grant agreement No. 213058. Daniel Ahmed also extends thanks to Zhiyuan Zhang, Mahmoud Medany, and Prajwal Agrawal for helpful discussions. Wei Wang acknowledges the National Natural Science Foundation of China (T2322006) and the Shenzhen Science and Technology Program (RCYX20210609103122038). Mariana Medina-Sánchez acknowledges the financial support received from the European Union’s Horizon 2020 research and innovation program (ERC Starting Grant Nr. 853609), the HORIZON-MSCA-2022-COFUND-101126600-SmartBRAIN3, and the Grant PID2023-148899OA-I00 funded by MICIU/AEI/ 10.13039/501100011033. Maria Guix acknowledges the financial support from the Spanish Ministry of Science (grants RYC2020-945030119-I and PID2023-151682NA-I00 funded by MCIN/ AEI /10.13039/501100011033/ and FEDER) and Unidades de Excelencia María de Maeztu 2021 CEX2021-001202-M. Bahareh Behkam and Naimat Kalim Bari acknowledge support from the National Science Foundation (CBET-2318093). Naimat Kalim Bari also gratefully acknowledges financial support from the Virginia Tech Presidential Postdoctoral Fellowship. Raymond Kapral acknowledges the Natural Sciences and Engineering Research Council of Canada. Giuseppe Battaglia, Subhadip Ghosh and Bárbara Borges Fernandes thank the European Research Council ChessTaG grant 769798 (G.B.); Ministry of Science and Innovation of Spain, Proyectos I+D+I PID2020-119914RBI00 and Proyectos I+D+I PID2023-149206OB-I00 and the Agencia de Gestión de Ayudas Universitarias y de Investigación (AGAUR) for the grant SGR 01538 and for SG fellowship (2022 BP 00214). Alexander Leshansky and Konstantin Morozov acknowledge the support of the Israel Science Foundation (ISF) via grant no. 2899/21. Alberto Escarpa and Beatriz Jurado Sánchez acknowledge support from The Spanish Ministry of Science, Innovation and Universities [Grant PID2023-152298NB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER, UE (A.E, B. J. S), grant TED2021-132720B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR (A.E, B. J. S); grant CNS2023-144653 funded by MCIN/AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR] and Junta de Comunidades de Castilla la Mancha (grant number SBPLY/23/180225/000058). Jeremie Palacci acknowledges support from the European Union through ERC grant (VULCAN, 101086998). Josep Puigmartí-Luis acknowledges the Agencia Estatal de Investigación (AEI) for the María de Maeztu, project no. CEX2021-001202-M, the Ministerio de Ciencia, Innovación y Universidades (Grant No. PID2020-116612RB-C33 funded by MCIN/AEI/10.13039/501100011033) and the Generalitat de Catalunya (2021 SGR 00270). James D. Nicholas, Jordi Ignés-Mullol, and Josep Puigmartí-Luis acknowledge support from the European Union’s Horizon Europe Research and Innovation Programme under the EVA project (GA no: 101047081). Josep Puigmartí-Luis and Jordi Ignés-Mullol acknowledge support from the European Union’s Horizon 2020 Proactive Open program under FETPROACT-EIC-05-2019 ANGIE (No. 952152). Jordi Ignés-Mullol also acknowledges the Ministerio de Ciencia, Innovación y Universidades (Grant No. PID2022-137713NB-C21 funded by MICIU/AEI/10.13039/501100011033). Lauren Zarzar and Yutong Liu acknowledge support from the US Army Research Office (Grant W911NF-18-1-0414). Longqiu Li acknowledges the National Natural Science Foundation of China (52125505, U23A20637) for providing financial support. Wyatt Shields acknowledges support from the National Science Foundation (NSF) through a CAREER grant (CBET 2143419). Xing Ma acknowledges the support from Shenzhen Science and Technology Program (RCJC20231211090000001). David H. Gracias acknowledges support from the NIH-NIBIB (R01EB017742). The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH. Samuel Sánchez acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and Horizon Europe research and innovation programmes (grants agreement No 866348, i-NanoSwarms), the CERCA program by the Generalitat de Catalunya, the project 2021 SGR 01606, and the "Centro de Excelencia Severo Ochoa" (Grant CEX2023-001282-S). Maria Jose Esplandiu acknowledges the Ministerio de Ciencia e Innovación of Spain (MICIN) through PID 2021-124568NB-I00 and TED2021-129898B-C21 project. Sarthak Misra and Antonio Lobosco acknowledge funding from European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (Grant Nr. 866494, project-MAESTRO). Jinxing Li acknowledges support from the National Science Foundation under Award Nos. CMMI 2323917, ECCS-2216131, ECCS 2339495, ECCS-2334134, NIH NIBIB Trailblazer R21 Award, and Henry Ford Hospital + MSU Cancer Research Pilot Award. Ze Xiong acknowledges the financial support from the International S&T Cooperation Program of Shanghai (24490710900) and the start-up grant from ShanghaiTech University (2023F0209-000-02). Yongfeng Mei acknowledges the National Natural Science Foundation of China (62375054), Science and Technology Commission of Shanghai Municipality (24520750200, 24CL2900200), and Shanghai Talent Programs. Ayusman Sen thanks the National Science Foundation, the Air Force Office of Scientific Research, and the Sloan Foundation for their financial support. Abdon Pena-Francesch acknowledges support from the Air Force Office of Scientific Research under award number FA9550-24-1-0185. Katherine Villa acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (GA no. 101076680; PhotoSwim) and the support from the Spanish Ministry of Science (MCIN/AEI/10.13039/501100011033) and the European Union (Next generation EU/PRTR) through the Ramón y Cajal grant, RYC2021-031075-I. Kang Liang acknowledges support from the Australian Research Council (DP250101401 and FT220100479) and the National Breast Cancer Foundation, Australia (IIRS-22–104). Jizhai Cui acknowledges the National Key Technologies R&D Program of China (2022YFA1207000) and Shanghai Rising-Star Program (24QA2700700). Xiang-Zhong Chen acknowledges the National Natural Science Foundation of China (52473254) and the National Key Research and Development Program of China (2023YFB35070003)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2021-001202-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001282-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedance-Assisted Multivariate Analysis Technique for Enhanced Gas Sensing with 2D Dichalcogenides

  • Prakasha, Bharath Somalapura
  • Xiao, Peng
  • Esplandiú, María J.
  • Yang, JiaQi
  • Navarro-Urrios, D.
  • Rodríguez-Viejo, Javier
  • Sledzinska, Marianna
Semiconducting two-dimensional (2D) materials have emerged as promising candidates for gas sensors due to their exceptional sensitivity and rapid response/recovery times. However, these sensors often face significant challenges, including baseline drift, nonlinearity, cross-sensitivity to multiple gases, and early response saturation, all of which compromise their accuracy and reliability. Conventional resistive sensing approaches, which rely on a single output signal for gas concentration estimation, fail to capture the complex interactions inherent to 2D materials, such as charge carrier generation, transport, and polarization. This work addresses these limitations by utilizing impedance measurements across multiple frequencies for MoS2- and WS2-based sensors, coupled with machine learning-assisted data processing for accurate relative humidity (RH) quantification. By leveraging the impedance domain, we effectively mitigated baseline drift over extended periods and identified mutually exclusive phase behavior for the WS2-based sensor. The MoS2-based sensor exhibited long-term stability, motivating the application of a neural network-based multilayer perceptron (MLP), one-dimensional convolutional network (1D-CNN), and long short-term memory (LSTM) models to interpret multifrequency impedance data for precise RH measurements. Our approach enabled robust humidity sensing over a wide range (0-90%) with significantly faster response and recovery times than commercial sensors. Additionally, the neural network-assisted WS2 sensor effectively minimized cross-sensitivity between humidity and CO2. This work showcases the potential of multifrequency impedance-based sensing, combined with machine learning, to overcome the traditional limitations of 2D material-based sensors, offering a pathway toward more reliable, stable, and precise gas-sensing technologies., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. This work was supported by the MICINN projects MOCCASIN-2D (Grants No. TED2021-132040B-C21; TED2021-132040B-C22), TED-2021-129898B-C21 and PID 2021-124568NB-I00. This work was supported by the MICIU project ELEMENTAL (Grant No. PID2023-152783OB-I00). M.S. and M.J.E. acknowledge support from ICN2 Seed Fund Project STRIDE-MoD. J.R.-V acknowledges support from 2021SGR-00644 funded by AGAUR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Minimizing Energy Demand in the Conversion of Levulinic Acid to γ‑Valerolactone via Photothermal Catalysis Using Raney Ni

  • Bujaldón, Roger
  • Fons, Arnau
  • García Amorós, Jaume
  • Vaca, Cristina
  • Nogués, Josep
  • Esplandiú, María J.
  • Gómez, Elvira
  • Sepúlveda, Borja
  • Serrà, Albert
The valorization of lignocellulosic wastes emerges as a prime strategy to mitigate the global carbon footprint. Among the multiple biomass derivatives, γ-valerolactone is particularly attractive as precursor of high-value chemicals, biofuel, green solvent or perfumery. γ-Valerolactone can be synthesized through a hydrogenation reaction from levulinic acid, obtained from cellulose. However, the high energy requirements of this synthetic pathway have hindered its industrial viability. To drastically reduce the reaction energy requirements, here a novel synthetic strategy, based on solvothermal-photothermal processes using cost-effective Raney-Ni as photothermal catalyst, is proposed. First, the use of hydrogen gas is avoided by selecting isopropanol as a safer and greener H-source. Second, a photothermocatalytic process is used to minimize the reaction temperature and time with respect to conventional reactions. This approach exploits the broadband optical absorption of the Raney®-Ni, due to its highly damped plasmonic behavior, to achieve fast and efficient catalyst heating inside the reactor. The photothermal reaction required less than 2 h and just 132 °C to reach over 95% conversion, thereby drastically reducing the reaction time and energy consumption compared to conventional reactions. Importantly, these conditions granted high catalyst reusability. This solvothermal-photothermal approach could offer a sustainable alternative for the industrial production of γ-valerolactone., R.B. and A.F. contributed equally to this work. Ministerio de Ciencia e Innovación (MICIN) was acknowledged through Grants DIN2021-011916, PID 2021–124568NB-I00, TED 2021–129898B-C21, and TED2021-129898B-C22, funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. The 2021-SGR-00651 grant from the Generalitat de Catalunya is also acknowledged. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB was supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Lafuente, Aritz
  • Vaca, Cristina
  • Sledzinska, Marianna
  • Novikov, Valentin
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
Nanostructures based on transition metal dichalcogenides have attracted considerable attention due to their tunable optoelectronic properties and large surface areas, showing a great potential as photocatalysts. Here, a novel supported structure based on 2D-MoS2/Cu2O nanoflakes grown on 3D mesoporous silica templates fabricated by a combination of solvothermal synthesis and e-beam deposition methods is presented. The synthesized MoS2 nanoflakes exhibited a combination of trigonal-prismatic 2H and distorted-trigonal 1T' phases, which contributed to a high density of active catalytic sites, facilitating efficient photogenerated charge transfer to analytes at the liquid interface. The deposition of Cu on the MoS2 nanoflakes enabled the formation of a semiconducting MoS2/Cu2O heterostructure with greatly enhanced photocatalytic activity. The supported MoS2/Cu2O nanoflakes showed excellent stability and an efficient generation of reactive oxygen species (ROS) with white and near infrared (NIR) light. The photocatalytic potential of the MoS2/Cu2O nanoflakes was established by the nearly complete degradation and mineralization of two organic pollutants (the antibiotic tetracycline and the biotoxin anatoxin-A) under low intensity white light, using ultralow catalyst concentration (ca. 4 μg mL-1). In addition, the use of MoS2/Cu2O nanostructures as photodynamic agents under low intensity NIR light was demonstrated. The NIR illuminated MoS2/Cu2O nanoflakes, placed at a distance of 120 μm from cultured cancer cells, enabled the complete elimination of cells via apoptosis, despite the large separation between them. These results underline the high photocatalytic activity of the supported MoS2/Cu2O nanoflakes to produce ROS with visible and NIR light, thus highlighting their suitability for environmental remediation and biomedical applications., The Ministerio de Ciencia e Innovación (MICIN) is acknowledged through Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, TED2021-132040B-C22, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. We also acknowledge funding from Generalitat de Catalunya through the 2021-SGR-00651 project. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB is supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033. Authors thank the Service of Chemical Analysis and Microscopy at the Universitat Autònoma de Barcelona, the CCiT-UB for the use of their equipment and Josep Martí for his assistance with HPLC analysis and also thank G. Sauthier (ICN2) for the support with XPS measurements. Authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic photothermal/photocatalytic activation of peroxymonosulfate using SrFe12O19@Ni-P core@shell microparticles for energy efficient water remediation

  • Bautista, Queralt
  • Rigual, Jordi
  • Lloreda, Judit
  • Fons, Arnau
  • Nogués, Josep
  • Gómez-Elvira González, José Manuel
  • Sepúlveda, Borja
  • Serrà, Albert
The urgent need for more efficient water remediation systems requires the development of new low cost and low energy strategies to remove persistent organic pollutants. This work investigates the activation of peroxymonosulfate (PMS) using Ni-P-coated SrFe<inf>12</inf>O<inf>19</inf> (SFO@Ni-P) microparticles under thermal, photothermal and photocatalytic conditions by either conventional heating or near-infrared (NIR; 915 nm) or blue (450 nm) light activation. The synergistic photothermal/photocatalytic activation using blue light (i.e., above the SFO bandgap) outperformed conventional thermal treatments or photothermal NIR activation, enhancing the PMS decomposition at moderate temperatures. The outstanding performance of SFO@Ni-P was due the combination of Ni<sup>2+</sup>/Ni<sup>3+</sup> redox cycling and the highly damped plasmonic behavior or the Ni-P shell, and the photothermal/photocatalytic activation offered by the semiconducting SFO core, leading to >99.9% degradation and 99.9–100.0% mineralization of tetracycline after 90 min under blue-light (combined photothermal/photocatalytic) activation. Moreover, the dual photothermal/photocatalytic effects under blue light enabled up to 87.4% mineralization of a 120 ppm multi-pollutant mixture in 90 min, with markedly lower electrical energy per order (EE/O) (≈4-fold) than conventional thermal activation. The catalysts maintained high activity over multiple cycles with negligible metal leaching. Remarkably, under sunlight the catalyst achieved nearly complete multi-pollutant mineralization (≈99%) within 40 min without external electrical input for heating/irradiation (excluding ancillary power). Importantly, seed germination/root elongation assays confirmed strong detoxification of the treated effluents (GI > 80%). These findings highlight the potential of SFO@Ni-P microparticles for efficient, reusable, and low-energy advanced oxidation processes, and solar-compatible wastewater treatment applications., Ministerio de Ciencia e Innovación (MICIN) is acknowledged through Grants DIN2021-011916, PID 2021-124568NB-I00, TED 2021-129898B-C21, TED2021-129898B-C22, PDC2023-145821-C21, PDC2023-145821-C22 and CNS2024-154690 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB is supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033. We acknowledge the funding from 2021-SGR-00651 project by the Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar photo-thermocatalytic valorization of biomass waste to biofuel precursors using inexpensive Ni–P/graphite catalysts

  • Rigual, Jordi
  • Fons, Arnau
  • Nogués, Josep
  • Esplandiú, María J.
  • Gómez-Elvira González, José Manuel
  • Sepúlveda, Borja
  • Serrà, Albert
Developing efficient, low-cost catalytic routes for biomass upgrading for sustainable fuel and chemical production is a crucial step toward a greener society and circular economy. Ni–P/graphite catalysts prepared by electroless deposition on graphite microflakes were used for photo-thermocatalytic transfer hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) in isopropanol, without external H<inf>2</inf> or noble metals. Graphite provides broadband optical absorption and localized heat generation; the Ni–P coating supplies the active hydrogen-transfer sites, with isopropanol serving as hydrogen donor. Under near-infrared laser irradiation at 105 °C, complete LA conversion was achieved in 120 min, 2.5-fold faster than the solvothermal process at the same temperature. Solar-driven tests using a parabolic concentrator (105 °C, 2.5 mg mL<sup>−1</sup>, 100 mL scale) yielded 99.1% GVL after 80 min; over-reduction to valeric acid became significant only at 120 min. The catalyst retained near-quantitative activity over five consecutive cycles with negligible cumulative Ni and P leaching. Tests with a synthetic biomass hydrolysate approximating wheat-derived acid hydrolysate composition (LA/furfural/formic acid, 104:1:36 M ratio) showed LA conversion exceeding 99.9% at 40 min and complete furfural conversion by 80 min. The furfural hydrogenation network yielded furfuryl alcohol, 2-methylfuran, tetrahydrofurfuryl alcohol, and 2-methyltetrahydrofuran (23.2% at 120 min). Formic acid decomposition supplemented isopropanol as hydrogen donor under mixed-feed conditions. The optimal catalyst loading of 2.5 mg mL<sup>−1</sup> was 36-fold lower than the Raney Ni dose required for comparable photo-thermocatalytic LA conversion, which additionally demanded a reaction temperature of ca. 130 °C., Financial support from the TED2021-129898B-C21, TED2021-129898B-C22 grants, funded by the Next Generation EU and the Spanish Ministry of Science and Innovation (MCIN) MICIU/AEI/10.13039/501100011033 and grant 2021-SGR-00651 from the Generalitat de Catalunya is acknowledged. The authors also acknowledge the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centers of Excellence program, Grant CEX2021-001214-S, and the IMB is supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033. The authors would like to express their gratitude to the CCiT-UB for allowing them to utilize their equipment., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bringing satellite and nanotechnologies together, unifying strengths against pollution and climate change

  • Ferral, Anabella
  • Bonansea, Matías
  • Scavuzzo, Carlos Marcelo
  • Nemiña, Francisco
  • Burgos Paci, Maximiliano
  • Ramirez, Jessica Casandra
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
Nowadays, we witness remarkable technological progress alongside unprecedented challenges that threaten the delicate balance of our planet's ecological system. Environmental contamination plays a central role in this, with rapid urbanization, industrialization, mining and agricultural practices intensifying the introduction of pollutants into the environment. This article highlights the potential synergy between two fields operating at vastly different scales: satellite technology and nanotechnology. This article delves into the offerings of each of these disciplines and examines how they can mutually contribute to the detection, prevention and mitigation of environmental pollution. Satellites play a crucial role in identifying and monitoring large-scale polluted areas, offering comprehensive insights into environmental challenges. They are indispensable in tracking air, water pollution levels, assessing land degradation, and monitoring changes in ocean health with relatively high spatial and temporal resolution. Nanotechnology leverages the unique properties of materials at sub-micron scale by offering amplified chemical reactivity and new optical, electronic, and magnetic attributes, enabling selective and sensitive sensors and rapid and efficient contaminant capture/degradation strategies. Emerging nanomaterials, along with nature-inspired and self-powered or self-sustaining designs, broaden capabilities for efficient solutions. Advanced nanocharacterization techniques deepen material understanding and quantification, while nanofabrication allows precise design of functional nano-devices. We believe the synergistic relationship between both fields can yield cooperative solutions, expediting effective measures and greatly influencing policy decisions. This article advocates for the collaboration between these two disciplines to foster impactful progress in facing global challenges.