Pasar al contenido principal

Estudio sobre técnicas de micro- y nano-fabricación en de emisores de tipo ‘electrospray’ con tecnologías basadas en silicio basados en silicio para un propulsor espacial eléctrico

DIN2021-011916

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Doctorados Industriales
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario IENAI SPACE SL

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Tip Angle on the Divergence and Efficiency of Electrospray Thrusters

  • Ramos-Tomás, Raúl
  • Villegas-Prados, David
  • de Saavedra, Borja
  • Cruz, Javier
  • Sepúlveda, Borja
Electrospray propulsion has appeared as a promising technology for space applications, particularly in response to the growing demand for small spacecrafts. Its high efficiency, low power consumption, and thrust control make it an attractive option for miniaturized propulsion systems. However, challenges remain in optimizing performance and controlling emission characteristics. Here we hypothesize that extremely sharp microneedles in externally wetted emitter devices, despite offering lower onset voltages and higher currents, can produce undesirable off-axis emission due to the propellant ejection perpendicular to the surface before arriving at the microneedle tip, thereby generating broad angular emission patterns. Through a combination of simulations and experimental evaluations, we analyzed the impact of emitter sharpness on the beam divergence and angular efficiency. It is shown that very sharp emitters (20° tip half-angle) exhibit clear off-axis emission with toroidal shape angular patterns in the plume even at moderate applied voltages, indicating emission of particles from the propellant before arriving at the tip and following trajectories nearly perpendicular to the emitter surface due to the generated electric field. Such off-axis emission significantly decreases the propulsive efficiency and may result in a decreased lifetime. This effect has been mitigated by increasing the tip semiangle to 30°, recovering a beam distribution with a typical Gaussian profile. Moreover, it has been observed that increasing the fluidic impedance of the nanostructured surface can slightly narrow the angular emission distribution to improve the propulsive efficiency. These findings underscore the importance of a precise geometric design to maximize the performance of electrospray thrusters, providing valuable insights into the development of advanced, high-efficiency propulsion systems for small satellites., The authors acknowledge Agencia de Gestio\u0301n de Ayudas Universitarias y de Investigacio\u0301n (AGAUR) through Industrial PhD Grant Expedient Number 2021DI014, Ministerio de Ciencia e Innovacio\u0301n (MICINN) through Grant DIN2021-011916, support through the Maria de Maeztu Grant CEX2023-001397-M funded by MICIU/AEI/10.13039/501100011033, and the \u201CComunidad de Madrid\u201D under \u201CAyudas destinadas a la realizacio\u0301n de doctorados industriales\u201D program IND2020/TIC-17316., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Minimizing Energy Demand in the Conversion of Levulinic Acid to γ‑Valerolactone via Photothermal Catalysis Using Raney Ni

  • Bujaldón, Roger
  • Fons, Arnau
  • García Amorós, Jaume
  • Vaca, Cristina
  • Nogués, Josep
  • Esplandiú, María J.
  • Gómez, Elvira
  • Sepúlveda, Borja
  • Serrà, Albert
The valorization of lignocellulosic wastes emerges as a prime strategy to mitigate the global carbon footprint. Among the multiple biomass derivatives, γ-valerolactone is particularly attractive as precursor of high-value chemicals, biofuel, green solvent or perfumery. γ-Valerolactone can be synthesized through a hydrogenation reaction from levulinic acid, obtained from cellulose. However, the high energy requirements of this synthetic pathway have hindered its industrial viability. To drastically reduce the reaction energy requirements, here a novel synthetic strategy, based on solvothermal-photothermal processes using cost-effective Raney-Ni as photothermal catalyst, is proposed. First, the use of hydrogen gas is avoided by selecting isopropanol as a safer and greener H-source. Second, a photothermocatalytic process is used to minimize the reaction temperature and time with respect to conventional reactions. This approach exploits the broadband optical absorption of the Raney®-Ni, due to its highly damped plasmonic behavior, to achieve fast and efficient catalyst heating inside the reactor. The photothermal reaction required less than 2 h and just 132 °C to reach over 95% conversion, thereby drastically reducing the reaction time and energy consumption compared to conventional reactions. Importantly, these conditions granted high catalyst reusability. This solvothermal-photothermal approach could offer a sustainable alternative for the industrial production of γ-valerolactone., R.B. and A.F. contributed equally to this work. Ministerio de Ciencia e Innovación (MICIN) was acknowledged through Grants DIN2021-011916, PID 2021–124568NB-I00, TED 2021–129898B-C21, and TED2021-129898B-C22, funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. The 2021-SGR-00651 grant from the Generalitat de Catalunya is also acknowledged. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB was supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Lafuente, Aritz
  • Vaca, Cristina
  • Sledzinska, Marianna
  • Novikov, Valentin
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
Nanostructures based on transition metal dichalcogenides have attracted considerable attention due to their tunable optoelectronic properties and large surface areas, showing a great potential as photocatalysts. Here, a novel supported structure based on 2D-MoS2/Cu2O nanoflakes grown on 3D mesoporous silica templates fabricated by a combination of solvothermal synthesis and e-beam deposition methods is presented. The synthesized MoS2 nanoflakes exhibited a combination of trigonal-prismatic 2H and distorted-trigonal 1T' phases, which contributed to a high density of active catalytic sites, facilitating efficient photogenerated charge transfer to analytes at the liquid interface. The deposition of Cu on the MoS2 nanoflakes enabled the formation of a semiconducting MoS2/Cu2O heterostructure with greatly enhanced photocatalytic activity. The supported MoS2/Cu2O nanoflakes showed excellent stability and an efficient generation of reactive oxygen species (ROS) with white and near infrared (NIR) light. The photocatalytic potential of the MoS2/Cu2O nanoflakes was established by the nearly complete degradation and mineralization of two organic pollutants (the antibiotic tetracycline and the biotoxin anatoxin-A) under low intensity white light, using ultralow catalyst concentration (ca. 4 μg mL-1). In addition, the use of MoS2/Cu2O nanostructures as photodynamic agents under low intensity NIR light was demonstrated. The NIR illuminated MoS2/Cu2O nanoflakes, placed at a distance of 120 μm from cultured cancer cells, enabled the complete elimination of cells via apoptosis, despite the large separation between them. These results underline the high photocatalytic activity of the supported MoS2/Cu2O nanoflakes to produce ROS with visible and NIR light, thus highlighting their suitability for environmental remediation and biomedical applications., The Ministerio de Ciencia e Innovación (MICIN) is acknowledged through Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, TED2021-132040B-C22, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. We also acknowledge funding from Generalitat de Catalunya through the 2021-SGR-00651 project. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB is supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033. Authors thank the Service of Chemical Analysis and Microscopy at the Universitat Autònoma de Barcelona, the CCiT-UB for the use of their equipment and Josep Martí for his assistance with HPLC analysis and also thank G. Sauthier (ICN2) for the support with XPS measurements. Authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic photothermal/photocatalytic activation of peroxymonosulfate using SrFe12O19@Ni-P core@shell microparticles for energy efficient water remediation

  • Bautista, Queralt
  • Rigual, Jordi
  • Lloreda, Judit
  • Fons, Arnau
  • Nogués, Josep
  • Gómez-Elvira González, José Manuel
  • Sepúlveda, Borja
  • Serrà, Albert
The urgent need for more efficient water remediation systems requires the development of new low cost and low energy strategies to remove persistent organic pollutants. This work investigates the activation of peroxymonosulfate (PMS) using Ni-P-coated SrFe<inf>12</inf>O<inf>19</inf> (SFO@Ni-P) microparticles under thermal, photothermal and photocatalytic conditions by either conventional heating or near-infrared (NIR; 915 nm) or blue (450 nm) light activation. The synergistic photothermal/photocatalytic activation using blue light (i.e., above the SFO bandgap) outperformed conventional thermal treatments or photothermal NIR activation, enhancing the PMS decomposition at moderate temperatures. The outstanding performance of SFO@Ni-P was due the combination of Ni<sup>2+</sup>/Ni<sup>3+</sup> redox cycling and the highly damped plasmonic behavior or the Ni-P shell, and the photothermal/photocatalytic activation offered by the semiconducting SFO core, leading to >99.9% degradation and 99.9–100.0% mineralization of tetracycline after 90 min under blue-light (combined photothermal/photocatalytic) activation. Moreover, the dual photothermal/photocatalytic effects under blue light enabled up to 87.4% mineralization of a 120 ppm multi-pollutant mixture in 90 min, with markedly lower electrical energy per order (EE/O) (≈4-fold) than conventional thermal activation. The catalysts maintained high activity over multiple cycles with negligible metal leaching. Remarkably, under sunlight the catalyst achieved nearly complete multi-pollutant mineralization (≈99%) within 40 min without external electrical input for heating/irradiation (excluding ancillary power). Importantly, seed germination/root elongation assays confirmed strong detoxification of the treated effluents (GI > 80%). These findings highlight the potential of SFO@Ni-P microparticles for efficient, reusable, and low-energy advanced oxidation processes, and solar-compatible wastewater treatment applications., Ministerio de Ciencia e Innovación (MICIN) is acknowledged through Grants DIN2021-011916, PID 2021-124568NB-I00, TED 2021-129898B-C21, TED2021-129898B-C22, PDC2023-145821-C21, PDC2023-145821-C22 and CNS2024-154690 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. The authors also would like to express their gratitude to the Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) for their support. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, and the IMB is supported by the Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M, both funded by MCIU/AEI/10.13039/501100011033. We acknowledge the funding from 2021-SGR-00651 project by the Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed