Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-phosphorescent heteroleptic silver(I) complex in long-lasting red light-emitting electrochemical cells

  • Lipinski, Sophia
  • Cavinato, Luca M.
  • Pickl, Thomas
  • Biffi, Giulia
  • Pöthig, Alexander
  • Coto, Pedro B.
  • Fernández-Cestau, Julio
  • Costa, Rubén D.
The design of red-emitting silver(I) complexes and their implementation in thin-film lighting are still challenging as (i) their high ligand-field splitting energy leads to high-energy emissions with a controversial mechanism (thermally activated delayed fluorescence vs fluorescence/phosphorescence), and (ii) their low electrochemical stability leads to the formation of silver nanoclusters, limiting device stability to a few seconds. Herein, a thoughtful complex design [Ag(xantphos)(deebq)]PF6 combining a large-bite angle diphosphine ligand (xantphos), a rigid, sterically hindered, π-extended biquinolin (deebq) is reported. In contrast to prior-art, this complex possesses (i) efficient red-emission (λem = 660 nm; photoluminescence quantum yield of 42%) assigned to a thermally equilibrated dual-phosphorescent emission based on spectroscopic/theoretical studies and (ii) stable reduction behavior without forming silver nanoclusters. This results in the first red light-emitting electrochemical cells featuring (i) improved stability of two orders of magnitude compared to prior-art (from seconds to hours) at irradiances of 20 µW cm−2, and (ii) a new degradation mechanism exclusively related to p-doping as confirmed by electrochemical impedance spectroscopy analysis. Indeed, a multi-layered architecture to decouple hole injection/transport and exciton formation enables a further 2-fold enhanced irradiance/stability. Overall, this work illustrates that deciphering the rules for silver(I) complex design for lighting is tricky, but worthwhile., S.L. and L.M.C. contributed equally. R.D.C. acknowledges the European Union's Horizon 2020 research and innovation MSCA-ITN STiBNite No. 956923., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring dielectric properties in atomistic models of amorphous boron nitride

  • Galvani, Thomas
  • Hamze, Ali K.
  • Caputo, Laura
  • Kaya, Onurcan
  • Dubois, Simon M.-M.
  • Colombo, Luigi
  • Nguyen, Viet-Hung
  • Shin, Yongwoo
  • Shin, Hyeon-Jin
  • Charlier, Jean-Christopher
  • Roche, Stephan
All data that support the findings of this study are included within the article (and any supplementary files)., We report a theoretical study of dielectric properties of models of amorphous Boron Nitride, using interatomic potentials generated by machine learning. We first perform first-principles simulations on small (about 100 atoms in the periodic cell) sample sizes to explore the emergence of mid-gap states and its correlation with structural features. Next, by using a simplified tight-binding electronic model, we analyse the dielectric functions for complex three dimensional models (containing about 10.000 atoms) embedding varying concentrations of sp1, sp2 and sp3 bonds between B and N atoms. Within the limits of these methodologies, the resulting value of the zero-frequency dielectric constant is shown to be influenced by the population density of such mid-gap states and their localization characteristics. We observe nontrivial correlations between the structure-induced electronic fluctuations and the resulting dielectric constant values. Our findings are however just a first step in the quest of accessing fully accurate dielectric properties of as-grown amorphous BN of relevance for interconnect technologies and beyond., This project has been supported by Samsung Advanced Institute of Technology. This paper reflects only the author's view and the Research Executive Agency is not responsible for any use that may be made of the information it contains. ICN2 acknowledges the Grant PCI2021-122092-2A funded by MCIN/AEI/10.13039/501100011033 and by the 'European Union NextGenerationEU/PRTR'. This work has been performed 'Amb el suport del Departament de Recerca i Universitats de la Generalitat de Catalunya' and with funding from PN: 'Proyecto PID2022-138283NB-I00 (MCIN/ AEI /10.13039/501100011033) and by FEDER. The MINERVA project is also aknowledged: Proyecto PCI2021-122092-2 financiado por MCIN/AEI /10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. This project is also funded by the European Union's Horizon 2020 Research and Innovation programme under the Marie Sklodowska-Curie entitled STiBNite (N∘ 956923), by the Fédération Wallonie-Bruxelles through the ARC on Dynamically Reconfigurable Moiré Materials (N∘ 21/26-116), by the Flag-Era JTC Project MINERVA (N∘ R.8006.21), by the EOS project 'CONNECT' (N∘ 40007563) and by the Belgium F.R.S.-FNRS through the research project (N∘ T.029.22F). Simulations were performed at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. Computational resources have also been provided by the CISM supercomputing facilities of UCLouvain and the CÉCI consortium funded by F.R.S.-FNRS of Belgium (N∘ 2.5020.11). Additional computational support was received from the King Abdullah University of Science and Technology-KAUST (Supercomputer Shaheen II Cray XC40) and Texas Advanced Computing Center (TACC) at The University of Texas at Austin. O K is supported by the REDI Program, a project that has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 101034328. S R acknowledges support from PID2019-106684GB-I00 funded by MICIU/AEI /10.13039/501100011033 and by ERDF and EU and 2021 SGR 00997, funded by Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface synthesis of B3N3-substituted two-dimensional covalent organic frameworks with distinct pore sizes and kagome band structures

  • Sena Tömekçe, Birce
  • Nazari Khodadadi, Alireza
  • Caputo, Laura
  • Piquero-Zulaica, Ignacio
  • Corso, Martina
  • Schiller, Frederik
  • Ortega, J. Enrique
  • Charlier, Jean-Christophe
  • Vaccaro, Luigi
  • Auwärter, Willi
Covalent organic frameworks (COFs) are a versatile class of materials whose structural, electronic and functional properties can be tailored by selecting the geometry and chemical composition of their linker and spacer moieties. We have synthesized single-layer B3N3-linked 2D COFs with biphenyl and quaterphenyl spacers on Ag(111) and Au(111) under ultra-high vacuum conditions. The comprehensive experimental characterization combined scanning tunneling microscopy, bond-resolved atomic force microscopy and photoemission spectroscopy. Density functional calculations revealed differences between the two BN-substituted COFs and their carbon-based analogues. The conduction bands of the COFs are primarily derived from electronic states of the spacer units. Introducing B3N3 linkers into the COFs increases the band gap and reduces frontier band dispersion, effects that can be further modulated by the length of the spacers. Additionally, the site-selective dehydrogenation of B3N3 nodes is shown to locally modify the COF's electronic properties. We thus demonstrate the effect of atomically precise B3N3 substitution on the electronic structure of two distinct kagome systems, through a comparative analysis of isostructural BN and CC substituted COFs. These results establish a new strategy for developing stable, metal-free COFs with structural diversity and programmable band structures, offering insights into the controlled BN-doping of low-dimensional carbon nanostructures., This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement No 956923 – STiBNite. L. Caputo thanks the UCLouvain Fonds Spéciaux de Recherche » (FSR 2023) for additional PhD funding. The Computational resources have been provided by the CISM supercomputing facilities of UCLouvain, the CÉCI consortium funded by F.R.S.-FNRS of Belgium (No 2.5020.11) and the Tier-1 supercomputer Lucia of the Walloon Region funded under the Grant Agreement No 1910247. I.P.-Z. acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) −531278475. The work of M. C., F.S., and J.E.O is supported by the Basque Government through the IT - 2133 - 26 research grant and PID2022-140845OB-C65 and PID2023-149158OB-C44, funded by the Spanish MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring dielectric properties in atomistic models of amorphous boron nitride

  • Galvani, Thomas|||0000-0002-5180-2367
  • Hamze, Ali K.|||0000-0002-5246-1728
  • Caputo, Laura|||0000-0003-0185-9442
  • Kaya, Onurcan|||0000-0002-5814-5486
  • Dubois, Simon M.M.|||0000-0003-2565-859X
  • Colombo, Luigi|||0000-0002-9048-3565
  • Nguyen, Viet-Hung|||0000-0001-6729-3520
  • Shin, Yongwoo|||0000-0001-7760-9883
  • Shin, Hyeon-Jin|||0000-0002-6992-6341
  • Charlier, Jean Christophe|||0000-0002-5749-1328
  • Roche, Stephan|||0000-0003-0323-4665
We report a theoretical study of dielectric properties of models of amorphous Boron Nitride, using interatomic potentials generated by machine learning. We first perform first-principles simulations on small (about 100 atoms in the periodic cell) sample sizes to explore the emergence of mid-gap states and its correlation with structural features. Next, by using a simplified tight-binding electronic model, we analyse the dielectric functions for complex three dimensional models (containing about 10.000 atoms) embedding varying concentrations of sp, sp and sp bonds between B and N atoms. Within the limits of these methodologies, the resulting value of the zero-frequency dielectric constant is shown to be influenced by the population density of such mid-gap states and their localization characteristics. We observe nontrivial correlations between the structure-induced electronic fluctuations and the resulting dielectric constant values. Our findings are however just a first step in the quest of accessing fully accurate dielectric properties of as-grown amorphous BN of relevance for interconnect technologies and beyond.