Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Penguin Hotspots at Risk: Facing Extreme Weather Events (code and files)

  • Gimeno Castells, Míriam
  • Ramírez Benítez, Francisco
  • Coll, Marta
  • Chiaradia, André
  • Artana, Camila
Code and files that support and make reproducible the findings of the manuscript *Penguin Hotspots at Risk: Facing Extreme Weather Events*, [COMING SOON], This work also acknowledges the Spanish government through the project SOSPEN (Spanish National Plan for Scientific and Technical Research and Innovation, 2021, PID2021-124831OA- I00), the project SEASentinels (Spanish National Plan for Scientific and Technical Research and Innovation, 2023, CNS2022-135631), the project ProOceans (Spanish National Plan for Scientific and Technical Research and Innovation, 2020, PID2020-118097RB-I00). This research is also part of the Integrated Marine Ecosystem Assessments (iMARES) research group funded by Agència de Gestió d'Ajuts Universitaris i de Recerca (Generalitat de Catalunya) Grant no. 2021 SGR 00435. MG was supported by the FPI-SO fellowship (PRE2022-101875)., This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

SegmentedForests: a labelled dataset of terrestrial LiDAR point clouds for semantic segmentation of forests [Dataset]

  • Laino, Diego
  • Cobo, Carlos
  • Ordóñez, Celestino
  • Bolaños, Rodolfo
  • Janvier, Romain
  • Giulioni, Federico
  • Hermannn, Miriam
  • Hudak, Andrew
  • Parsons, Russell
  • Santín, Cristina
The point clouds are stored in LAZ files. 3DFin configuration files (.INI) with the parameters used to process each point cloud are also included., SegmentedForests is a curated dataset of manually segmented ground-based point clouds from forest plots, specifically designed to facilitate the training and validation of semantic segmentation models. This publicly available dataset contains >920 million labelled points from 14 forest plots, acquired using both terrestrial laser scanning (TLS) and mobile laser scanning (MLS) technologies. It covers two hectares of broadleaf, conifer, and mixed stands from different bioclimatic regions and features >1600 trees across 16 tree species. Each point cloud is labelled into multiple vegetation classes (up to 16), such as tree stems, branches, grass, shrubs, and down wood, as well as non-vegetation elements commonly present in forest scenes, including rocks, people, and stakes. Data splits to facilitate DL model development using our dataset are provided as well., NERC Environmental Bioinformatics Centre; Advancing 3D Fuel Mapping for Wildfire Behaviour and Risk Mitigation ModellingNE/T001194/1; Ministerio de Ciencia, Innovación y Universidades Advancing carbon emission estimations from wildfires applying artificial intelligence to 3D terrestrial point cloudsPID2021-126790NB-I00; Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033; Gobierno del Principado de Asturias FIREPROsIDE/2024/000780; Strategic Environmental Research and Development Program RC20-1025; Strategic Environmental Research and Development Program RC23-7626; Strategic Environmental Research and Development Program RC20-1046, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reversible low-pressure barocaloric effect from mixed‑phase stabilization in a hybrid cadmium perovskite [Dataset]

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Blasco, Javier
  • Cuartero, Vera
  • Popescu, Catalin
  • Liu, Xiaojiao
  • Subías, Gloria
  • Evangelisti, Marco
[Sample preparation and characterization] The layered hybrid organic–inorganic perovskite (C9H19NH3)2CdCl4 (C9CdCl) was synthesized following the procedure described in the associated manuscript. Phase purity was verified by powder X-ray diffraction (PXRD)., [Adiabatic calorimetry] Heat-capacity measurements were performed using an AK-6-25 adiabatic calorimeter (AOZT Termis). Measurements were carried out over the temperature range encompassing the structural phase transitions. The transition entropy and enthalpy changes were determined from the temperature dependence of the heat capacity., [Differential scanning calorimetry] Differential scanning calorimetry (DSC) measurements were conducted using a TA Instruments DSC Q2000 calorimeter equipped with a Refrigerated Cooling System (RCS90) and a standard DSC cell. Approximately 4 mg of sample was sealed in Tzero Aluminum Hermetic pans and measured under a continuous nitrogen flow. Heat-capacity measurements were calibrated using sapphire standards. Additional DSC experiments were performed at different heating and cooling rates to evaluate the kinetic dependence of the phase transitions., [Powder X-ray diffraction] Laboratory PXRD measurements were carried out using a Rigaku D-Max diffractometer with Cu Kα₁,₂ radiation over the 2θ range 2.5–50°. Temperature-dependent PXRD data were collected using a Rigaku variable-temperature stage, allowing in situ measurements between 93 and 573 K., [Synchrotron X-ray powder diffraction] High-resolution synchrotron X-ray powder diffraction (SXRPD) measurements were performed at the MSPD beamline of the ALBA Synchrotron (Spain) and at beamline I15 of Diamond Light Source (United Kingdom). Temperature-dependent and pressure-dependent diffraction patterns were collected to investigate the structural evolution across the phase transitions. At Diamond Light Source, high-pressure diffraction experiments were performed using a high-pressure jump cell enabling continuous pressure variation up to approximately 3.5 kbar. Powder samples were loaded into sealed Kapton capillaries, while pressure was transmitted hydrostatically through deionized water surrounding the capillary. Both isothermal and isobaric diffraction measurements were carried out over the ranges 278–330 K and 0.4–2.0 kbar., [High-pressure calorimetry] Barocaloric measurements were performed using a custom-built high-pressure calorimetric setup incorporating a calorimeter within a Be–Cu pressure cell. A surface-mount resistor served simultaneously as sample holder and temperature sensor, while Daphne 7373 oil was employed as the hydrostatic pressure-transmitting medium. Measurements were conducted in an Oxford Instruments OptistatDN cryostat operating between 77 and 400 K., Pressure‑driven phase transitions provide a means to modulate entropy in solids, although achieving large and reversible caloric responses remains a central challenge. The layered hybrid organic-inorganic perovskite (C9H19NH3)2CdCl4 exhibits two first-order transitions near room temperature that underpin its barocaloric response. High‑pressure calorimetry combined with synchrotron X‑ray diffraction shows that compression stabilizes a mixed‑phase region over a wide pressure-temperature range rather than inducing a complete transformation. Consequently, the effective entropy change decreases with pressure, while a substantial reversible contribution is preserved, yielding reversible entropy and temperature changes of ΔSᵣₑᵥ ≈ 136 J kg⁻1 K⁻1 and ΔTᵣₑᵥ ≈ 17 K for a pressure change of 0.8 kbar. This leads to a refrigerant capacity exceeding 4 kJ kg⁻1 with a favorable coefficient of performance in the low-pressure regime. Notably, the large reversible temperature changes achieved at comparatively low pressures and close to room temperature highlight the potential of this material for solid-state cooling. Overall, these results demonstrate that high caloric performance can be achieved without complete phase transformation, reflecting a trade-off between entropy change and reversibility in soft hybrid lattices., This work was supported by Spanish MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). This work was carried out with the support of Diamond Light Source, instrument I15 (proposal CY40151) and ALBA Synchrotron, MSPD beamline (proposal 2024098680). E.K.C. acknowledges financial support from MICIU through a doctoral fellowship (PRE2022-103760). The authors acknowledge the Servicio General de Apoyo a la Investigación from Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reactivity of Mg-stabilised zirconia porous support towards molten alkaline carbonates [Dataset]

  • Merino, R. I.
  • Sanjuán, M. L.
  • Oliete, Patricia B.
  • Peña, J. I.
  • Safarzadeh Khosrowshahi, Mobin
The present dataset compiles the source data generated for the investigation of the evolution of microstructure and phases of MgO stabilized zirconia with aligned micron sized pores, produced by directional solidification followed by acid etching, after being contacted to Li-Na-K molten eutectic carbonate mixture at temperatures from 600 to 800 °C in CO2-lean gas streams (room air), in order to elucidate failure origins. This research is relevant as the ceramic has been previously identified as a candidate support for dual ceramic - molten carbonate CO2 separation membranes. The analysis of the present dataset and additional data is part of a research work intended for publication elsewhere., - PID2021-124863OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 - CEX2023-001286-S funded by MCIN/AEI/ 10.13039/501100011033 - PRE2022-102008 funded by MCIN/AEI/ 10.13039/501100011033 and FSE+ - Financial support to the Research Group T02_23R by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Warming increases the toxicity of plastic additives in the marine copepod Centropages typicus [Dataset]

  • Aguilera Dal Grande, Paula
  • Omedes Martínez, Sergi
  • Solé, Montserrat
  • Saiz, Enric
This dataset displays biomarkers and mortality % of the tested species under different warming and pullutants treatments, PID2023-150548NB-I00 and PID2024-160452OB-C22 funded by MICIU/AEI /10.13039/501100011033 and by FEDER, and also with funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S). PRE2022-102491 funded by MCIN/AEI/10.13039/501100011033 MICIU/AEI /10.13039/501100011033 and by FSE+, Peer reviewed