Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Software de investigación Software (Software)

Class3Dp

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] Class3Dp is a software tool developed for supervised classification of photogrammetric point clouds. It allows the selection of training samples and classification of point clouds according to different features and machine learning models. Point clouds obtained from photogrammetric algorithms (e.g., Structure from Motion) include spectral information recorded in the image acquisition process using RGB, multispectral or hyperspectral sensors. The software extracts spectral and geometric features from the point clouds to be used for point classification., The financial support for its development has been provided by the grant BES-2017-081920 and the R&D&I projects CGL2016-80705-R and PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "FSE Invierte en tu futuro".
RUA. Repositorio Institucional de la Universidad de Alicante
Software de investigación Software (Software)

ParamIni_LL_NRTL: Graphical User Interface (GUI) for the Selection of NRTL Initial Parameters for the Correlation of Ternary Liquid-Liquid Equilibrium Data (Type I, II, III and 0 (LL island), i.e. with 1, 2, 3 or 0 binary pairs partially miscible)

  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
The correlation of liquid-liquid equilibrium data is still currently a problem not fully resolved, especially for complex systems such as, those involving ionic liquid, where the high nonlinearity and non-convexity of the equations involved produce convergence problems, with a strong dependence on the initialization values used of the obtained solution. To avoid this situation, for the NRTL model, we have analyzed more than 200 LLE ternary systems (including type I, II, III and 0 or island, following the Treybal classification, Figure 1) in order to obtain a good representation of the different possible binodal curves and tie triangles that this model can reproduce satisfactorily, in a wide enough interval of values of the different parameters (taui,j, taui,j). All these systems have been parametrized regarding the main characteristics of the corresponding LLE, such as the number of binary subsystems partially miscible, the size and middle point of the binary tie-lines, the slope of the tie-lines, the location of the plate point, etc. With this parametrization, we have created a database and a new graphical user interface, GUI, that allows loading a set of liquid-liquid experimental data to obtain, using optimization algorithms and machine learning techniques, a consistent set of initial NRTL parameters that predicts a parametrized LLE near the experimental one. This set of parameters can be used now in any correlation data algorithm (using the corresponding equilibrium condition: isoactivity, minimum of the global Gibbs energy of mixing, or the Gibbs energy of mixing minor common tangent plane) to obtain the final rigorous solution. We believe that the present work can help researchers, professionals and students, in the task of correlating experimental liquid-liquid equilibrium data, in order to obtain consistent binary interaction parameters, taking into account that the correct calculation of the phase equilibrium is a key point in the optimal (efficient and sustainable) design of the corresponding processes and equipment. Related references: *Should we trust all the published LLE correlation parameters in phase equilibria? Necessity of their Assessment Prior to Publication. Fluid Phase Equilibria. 2017, 433, 243-252 (http://dx.doi.org/10.1016/j.fluid.2016.11.009). *GE Models and Algorithms for Condensed Phase Equilibrium Data Regression in Ternary Systems: Limitations and Proposals. The Open Thermodynamics Journal. 2011, 5, (Suppl 1-M5) 48-62 (http://dx.doi.org/10.2174/1874396X01105010048). * Checking Liquid-Liquid Critical Point Conditions and their Application in Ternary Systems. Industrial & Engineering Chemistry Research. 2012, 51(13), 5098-5102 (http://dx.doi.org/10.1021/ie202793r). *LLE data correlation using NRTL model for different types of binary systems: UCST, LCST and closed miscibility loops. Industrial & Engineering Chemistry Research. 2020, 59(17), 8469-8479 (https://doi.org/10.1021/acs.iecr.0c00141). * GMcal_TieLinesLL: Graphical User Interface (GUI) for Topological Analysis of Calculated GM Surfaces and Curves, including Tie-Lines, Hessian Matrix, Spinodal Curve, Plait Point Location, Miscibility Boundaries, etc. for Binary and Ternary Liquid-Liquid Equilibrium (LLE) Data. RUA 2015-2022. http://hdl.handle.net/10045/51725. *GMcal_TieLinesVL: Graphical User Interface (GUI) for the Topological Analysis of Experimental and Calculated GM Functions for Binary and Ternary (isobaric or isothermal) Vapor-Liquid Equilibrium (VLE) Data (including Tie-Lines, Derivatives, Distillation Boundaries, etc.). RUA 2022. http://hdl.handle.net/10045/122857. * Boundaries_LL_NRTL Graphical User Interface (GUI) for the Characterization of the NRTL model: Binary Spinodal Surfaces (in the tau(i,j)-tau(j,i)-xi space), LLE Maps and Miscibility Boundaries. RUA 2022 (http://hdl.handle.net/10045/121471). * What does the NRTL model look like? Determination of boundaries for different fluid phase equilibrium regions. AIChE Journal. 2022, e17805 (https://dx.doi.org/10.1002/aic.17805).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

FastPCC: software to compute phase cross-correlations

  • Ventosa, Sergio
  • Schimmel, Martin
Más información: https://github.com/sergiventosa/FastPCC, Contacto: Sergi Ventosa, sventosa@geo3bcn.csic.es, Contacto: Martin Schimmel, mschimmel@geo3bcn.csic.es, Software to compute interstation correlations, including fast implementations of geometrically-normalized (CCGN), 1-bit correlation (1-bit CCGN), and phase cross-correlations (PCC) with and without using the GPU (Ventosa et al., SRL 2019). The software packages of fast phase cross-correlation and ts-PWS stacking are basic building blocks in the design of efficient signal extraction methods from interstation correlations. Main features: Computes 3 types of correlations: The standard (geometrically) normalized cross-correlations (GNCC). The 1-bit amplitude normalization followed by the GNCC (1-bit GNCC). The phase cross-correlation (PCC). The computations of PCC are accerated in several ways: PCC is parallelized in the CPU using OpenMP 3.1 and in the GPU using CUDA (two independent codes). The computational cost of PCC with power of 2 is reduced to about twice the one of 1-bit GNCC., Ministerio de Economía, industria y competitividad, CGL2013-48601-C2-1-R; Agence Nationale de la Recherche, ANR-14-CE01-0012; EU Framework Programme Horizon 2020, ES1401, TIDES COST Actions, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

TS_PWS0_UG: a program to measure group velocity in seismic noise correlation studies based on phase coherence and resampling strategies

  • Schimmel, Martin
  • Stutzmann, E.
  • Ventosa, Sergio
Contacto: Martin Schimmel, mschimmel@geo3bcn.csic.es, Más información: http://diapiro.ictja.csic.es/gt/mschi/SCIENCE/tseries.html#software, This code is for measuring seismic group velocities in noise correlation studies. It is a semi-automated approach which employs resample strategies to determine robust group velocities and their bounds. The input data are noise cross-correlations obtained for a single station pair before stacking. The TS_PWS0_UG program stacks the data using a fast time-frequency dependent Phase Weighted Stacking approach (Ventosa et al., 2017) based on Wavelet theory. The program measures group velocities as described in Schimmel et al. (2018). The programs need the SAC library to read and write data with the SAC binary format. Program descriptions are obtained by executing the code without any flag. The package further contains Readme-files with information and simple examples to show the workflow. Programs are called through shell scripts or command line and work for Linux/Unix environments. This software was first edited in 2017 and updated in 2018., Ministerio de Economía, industria y competitividad CGL2013-48601-C2-1-R MISTERIOS, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

ts-PWS (v1.0.2): software to compute time-scale phase-weighted stack

  • Ventosa, Sergio
  • Schimmel, Martin
Más información: The ts-PWS version 1.0 is available in Ventosa (2018), DOI:10.5281/zenodo.1154588., Más información: https://github.com/sergiventosa/ts-PWS, Contacto: Sergi Ventosa, sventosa@geo3bcn.csic.es Contacto: Martin Schimmel, mschimmel@geo3bcn.csic.es, Software to compute the time-scale phase-weighted stack (ts-PWS), including the two-stage stack and the unbiased phase coherence strategies (Ventosa et al., GJI 2017). The software packages of fast phase cross-correlation and ts-PWS stacking are basic building blocks in the design of efficient signal extraction methods from interstation correlations. Main features Fast: The time-frequency expansion used in the ts-PWS is implemented using frames of wavelets (Morlet and Mexican hat wavelets are available). The most demanding operation is conventionally reading the data. Better filtering: The two-stage stacking and the unbiased phase coherence help to reduce signal attenuation and to increase noise attenation. Simple setup: All parameters are automatically set, e.g., when w0, Q or number of cycles is changed the parameters describing the frame are adapted accordingly. Resampling techniques: The bootstrap and jackknife techniques can be applied to build a pull of stacked sequences for a subsequent error analysis. The ts-PWS version 1.0 is available in Ventosa (2018), DOI:10.5281/zenodo.1154588., Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la General- itat de Catalunya; 7th European Framework Program Marie Curie COFUND contract 600385 Beatriu de Pinos Fellowship; EU Framework Programme Horizon 2020 ES1401 TIDES COST Actions; Ministerio de Economía, industria y competitividad CGL2013-48601-C2-1-R MISTERIOS; Agence Nationale de la Recherche ANR-16-C33-0005 ANR MIMOSA, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

NAO: a code for reconstructing North Atlantic Oscillation from XRF data

  • Parnell, Andrew
  • Cahill, Niamh
  • Sánchez-López, Guiomar
  • Hernández, Armand
  • Giralt, Santiago
Más información: https://github.com/andrewcparnell/NAO Contacto: Andrew Parnell, andrew.parnell@mu.ie, R code for a Bayesian model for reconstructing North Atlantic Oscillation from X-Ray Fluorescence (XRF) data. This code follows a Bayesian modelling approach to produce a reconstruction of the NAO’s impact on the central Iberian Peninsula. The relationship between proxy and climate is derived from a training data set for the instrumental/proxy calibration period and is expressed through a likelihood function. This function is combined with a prior probability density function containing parameter information in order to obtain a posterior probability distribution of the reconstructed NAO values using Bayes’ theorem. Whilst Parnell et al. (2015) based their framework on reconstructing multivariate temperature and moisture measurements from raw pollen data, this method is easily adaptable to other proxies and climate variables. Indeed, Cahill et al. (2016) used a similar approach to reconstruct sea level from foraminifera. In all cases the measurements/counts of the proxy are required for a set of sediment layers (depths) in a core., Spanish Ministry of Economy and Competitiveness, CGL2010-15767/BTE PaleoNAO; Spanish Ministry of Economy and Competitiveness, CGL2013-40608-R; RapidNAO; Spanish Ministry of Economy and Competitiveness ,CGL2016-75281-C2-1-R PaleoModes; PhD JAE grant BOE 03/02/2011; Generalitat de Catalunya y European Union Horizon 2020 2016 BP 00023 Beatriu de Pinós – Marie Curie Cofund programme fellowship; Portuguese FCT project PTDC/CTA-GEO/29029/2017 HOLMODRIVE—North Atlantic Atmospheric Patterns Influence on Western Iberia Climate: From the Late Glacial to the Present; Science Foundation Ireland Career Development Award 17/CDA/4695; Science Foundation Ireland 12/RC/2289_P2, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

acoathena/aco_simuls 1.0.0, Flux sensitivity as a function of exposure time for Athena mission instruments

  • Carrera, Francisco J.
  • Martínez-Núñez, Silvia
  • Ceballos, María Teresa
  • Athena Community Office
Language: python (jupyter lab, jupyter notebook), Additional software: HEASOFT with PyXspec., Determine the flux sensitivity in a given energy band for a given instrument of the Athena X-ray mission as a function of exposure time. The simulations can be done either running the jupyter notebook from the command line or executing (cell-by-cell) the jupyter-notebook Athena_Xray_flux_vs_expTime.ipynb. The steps followed are: 1. Importing libraries 2. Defining input parameters, derived parameters and Xspec parameters 3. Gettting background count rate in the reference band normalized to the source area 4. Determining counts, flux (cgs units; erg cm-2 s-1), confusion flux (cgs), optimum extraction flux (cgs) & optimum extraction radius (arcsec) in the reference band over a loop of exposure times 5. Output file with results: the information provided by the output file comprises: Time_s, Flux_cgs, Flux_confusion_cgs, FluxOptimumExtraction cgs & RadiusOptimumExtraction_arcsec 6. Plotting limiting sensitivity vs exposure time., With funding from the Spanish government through the ‘María de Maeztu Unit of Excellence’ accreditation MDM-2017-0765 Funded by the Spanish Ministry MCIU under project RTI2018-096686-B-C21 (MCIU/AEI/FEDER, UE), co-funded by FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Ocean Data QC: Software package for quality control of hydrographic sections

  • Velo, Antón
  • Lange, Nico
  • Cacabelos, Jesús
  • Pérez, Fiz F.
  • Tanhua, Toste
1 file, New features: - App and project settings are now much more customizable. - Customized import, export, naming, precision and usage options for each parameter with [Columns] button in settings. - Capability of load and save to .xlsx files. First sheet will be the data and second one the metadata - Electron and Bokeh versions updated, This software was supported by BOCATS2 (PID2019-104279GB-C21) project funded by MCIN/AEI/10.13039/501100011033 Spanish Government and is a contribution of the CSIC Interdisciplinary Thematic Platform (PTI) WATER:iOS. European Commission, COMFORT - Our common future ocean in the Earth system – quantifying coupled cycles of carbon, oxygen, and nutrients for determining and achieving safe operating spaces with respect to tipping points, 820989 European Commission, AtlantOS - Optimizing and Enhancing the Integrated Atlantic Ocean Observing System, 633211, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

HoFa (v.0.1.0)

  • Candela Pokorna, Pablo
  • González-Sánchez, Diego
  • Szegedy, Balázs
Multiplataforma (Windows, Linux, Mac), lenguaje de programación: Python (funcionalidad principal) y ReStruturedText (documentación), Se incluye en el paquete los siguientes ficheros: full-environment.yml para crear un environment en Conda para asegurar la reproducibilidad de todos los ejemplos; environment.yml para tener una versión simplificada del anterior; requirements-full.txt con una lista exhastiva de todos los paquetes instalados en el entorno de desarrollo y prueba del software; requirements.txt para una versión simplificada de lo anterior. Licencias: Apache License 2.0 para todo el repositorio (https://www.apache.org/licenses/LICENSE-2.0), CC-BY para la documentación que los autores pondrán en la web (https://creativecommons.org/licenses/by/4.0/), This software package implements theoretical tools in higher-order Fourier analysis, developed mainly by the authors in the paper "Spectral Algorithms in Higher-Order Fourier Analysis" (arXiv: 2501.12287, to appear in Forum of Mathematics, Sigma). The tools address challenges in the spectral analysis of complex functions or signals, by extending classical Fourier methods to higher-order contexts. Key Features and Functionality: - Provides a Python implementation of the algorithms and theoretical concepts from both higher-order Fourier analysis and the aforementioned paper, including natural extensions of existing results. The main key functionalities are: 1) Methods to compute the Gowers norms of functions. 2) Denoise signals with respect to higher-order structure. 3) Decompose signals into their higher-order components. - Offers comprehensive documentation to make the theory accessible to a broad audience, including non-mathematicians, engineers, and researchers. Motivation: To our knowledge, no other software is dedicated to higher-order Fourier analysis with this algorithmic approach. Existing spectral analysis tools (e.g., FFT libraries) do not cover the higher-order properties addressed here. This package fills a gap by providing a practical toolkit to explore and apply these theoretical concepts, paving the way for future real-world applications. While the associated paper does not present specific applications, the software is designed to facilitate their development. Structure: The package is structured into two main components: on one hand, the Python code, which develops in different modules the aforementioned functionality, and on the other hand the documentation in ReStructuredText Format, which provides installation guides, introductory material, tutorials, user-guides, API-references, and mathematical background in order to use the software., This work was supported by project PID2024-156180NB-I00 funded by Spain’s MICIU/AEI. The second-named author was supported by HORIZON-MSCA-2024-PF-01, AlgHOF 101202161, funded by the European Union. The third-named author was supported by the Hungarian Ministry of Innovation and Technology NRDI Office within the framework of the Artificial Intelligence National Laboratory Program (MILAB, RRF-2.3.1-21-2022-00004)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation CEX-2023-001347-S., No, Sin experimentacion animal ni uso de NAMs
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Software de investigación Software (Software)

A package for computing the set of affine C-semigroups with fixed Frobenius element and non-consecutive small elements. 

  • Tapia Ramos, Raquel
  • Vigneron Tenorio, Alberto
This is a Mathematica package for computing the set of affine C-semigroups with fixed Frobenius element f and non-consecutive small elements