Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal measurement setup for damage detection in piezoelectric plates

  • Rus, G.
  • Palma Guerrero, Roberto
  • Pérez-Aparicio, José L.
[EN] An optimization of the excitation-measurement configuration is proposed for the characterization of damage in PZT-4 piezoelectric plates, from a numerical point of view. To perform such an optimization, a numerical method to determine the location and extent of defects in piezoelectric plates is developed by combining the solution of an identification inverse problem, using genetic algorithms and gradient-based methods to minimize a cost functional, and using an optimized finite element code and meshing algorithm. In addition, a semianalytical estimate of the probability of detection is developed and validated, which provides a flexible criterion to optimize the experimental design. The experimental setup is optimized upon several criteria: maximizing the probability of detection against noise effects, ensuring robust search algorithm convergence and increasing the sensitivity to the presence of the defect. The measurement of voltage phi is concluded to provide the highest identifiability, combined with an excitation of the specimen by a mechanical traction transverse to the polarization direction. Sufficient accuracy is predicted for the damage location and sizing under realistic noise levels. (c) 2008 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Education of Spain through Grant No. FPU AP-2006-02372.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental design of dynamic model-based damage identification in piezoelectric ceramics

  • Rus, Guillermo
  • Palma, Roberto
  • Pérez-Aparicio, José L.
[EN] A model-based inverse problem strategy is proposed for damage characterization, starting from the electromechanical response measurement as input data, and incorporating a numerical model that simulates the piezoelectric response. Furthermore, a sensitivity analysis is developed to provide a rational basis to correctly design the excitation/measurement system. The model-based inverse problem is solved by minimizing a cost functional using genetic algorithms. The cost functional or discrepancy is defined as the L-2 norm of the difference between experimental and simulated measurements. The latter are obtained by solving the forward problem, using a novel 2D dynamic piezoelectric finite element. The effects of measurement noise and model uncertainties are studied in detail through a sensitivity analysis, where a sensitivity factor is defined and implemented. The proposed inverse problem strategy reconstructs the defect characteristics with sufficient precision, under realistic levels of noise. © 2011 Elsevier Ltd. All rights reserved., The authors would like to thank the Ministerio de Innovacion y Ciencia, Spain, for the FPU Grant AP-2006-02372 and also from Grants Excelencia Junta Andalucia P08-TEP-3641, MCyT DPI 2002-04472-C02-02. Authors would also like to thank Prof. Rafael Gallego for his invaluable contributions to the development of the present work.