Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Potentiometric Hydrogen Sensor with 3D-Printed BaCe0.6Zr0.3Y0.1O3-α Electrolyte for High-Temperature Applications

  • Hinojo, Antonio
  • Lujan, Enric
  • Nel-lo, Marc
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future applications. Potentiometric sensors based on perovskite-structured solid-state electrolytes can be a good option for H2 monitoring. Nevertheless, the geometry of the sensor should be designed according to the specific necessities of each technological field. Conventional shaping processes need several iterations of green shaping and machining to achieve a good result. In contrast, 3D printing methods stand out from conventional ones since they simplify the creation of prototypes, reducing the cost and the number of iterations needed for the obtainment of the final design. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting electrolyte for potentiometric sensors construction. Two different shapes were tested for the sensors’ electrolyte: pellets (BCZY-Pellet) and crucibles (BCZY-Crucible). Ceramics were shaped using extrusion-based 3D printing. Finally, parameters, such as sensitivity, response time, recovery time and the limit of detection and accuracy, were evaluated for both types of sensors (BCZY-Pellet and BCZY-Crucible) at 500 °C., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

BaCe0.6Zr0.3Y0.1O3-α electrochemical hydrogen sensor for fusion applications

  • Hinojo, Antonio
  • Lujan, Enric
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Potentiometric sensors are broadening their application scope because they are affordable and scalable devices capable of being used in-field and online. In that frame, the use of proton-conducting solid-state electrolytes in these sensors architecture offers the possibility to operate at high temperatures, with high physical and chemical stabilities. A potential application for this kind of sensor is tritium monitoring in future fusion reactors. The first steps toward the development of this analytical tool will be devices capable of measuring hydrogen in high temperature applications In the present work, a potentiometric sensor based on BaCe0.6Zr0.3Y0.1O3-α (BCZY) solid-state proton-conductor was tested for hydrogen monitoring at 325 °C, 350 °C and 375 °C. BCZY was synthesized by the solid-state method and characterized using XRD. The sensor's linear range, accuracy and limit of detection were evaluated at the selected temperatures (325 °C, 350 °C and 375 °C). Moreover, sensors presented a very short response and recovery times (<100 s)., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Shaping Techniques' Influence on the Electrochemical Properties of BaCe0.6Zr0.3Y0.1O3-δ proton conductor

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen's significance as a clean and high-energy source spans various industries, driving advancements in fuel cell technology, transportation, and renewable energy storage systems. In particular, solid-state proton conductors like perovskite-type materials exhibit promising attributes for applications such as fuel cells and hydrogen sensors. However, conventional shaping techniques like uniaxial pressing impose limitations on device scalability and geometry. To address these challenges, alternative methods are gaining traction, like cold isostatic pressing or additive manufacturing. Each technique offers distinct advantages in shaping materials, impacting their structural and morphological properties. In this study, pellets of BaCe0.6Zr0.3Y0.1O3-δ (BCZY) solid-state electrolyte were fabricated using four different shaping techniques: uniaxial pressing, cold isostatic pressing, 3D extrusion, and lithography. Characterization via X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopy provided insights into changes in crystalline structure, sintering quality, and electrochemical properties, respectively., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Potentiometric Hydrogen Sensor with 3D-Printed BaCe0.6Zr0.3Y0.1O3-α Electrolyte for High-Temperature Applications

  • Hinojo, Antonio
  • Lujan, Enric
  • Nel-lo, Marc
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future applications. Potentiometric sensors based on perovskite-structured solid-state electrolytes can be a good option for H2 monitoring. Nevertheless, the geometry of the sensor should be designed according to the specific necessities of each technological field. Conventional shaping processes need several iterations of green shaping and machining to achieve a good result. In contrast, 3D printing methods stand out from conventional ones since they simplify the creation of prototypes, reducing the cost and the number of iterations needed for the obtainment of the final design. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting electrolyte for potentiometric sensors construction. Two different shapes were tested for the sensors’ electrolyte: pellets (BCZY-Pellet) and crucibles (BCZY-Crucible). Ceramics were shaped using extrusion-based 3D printing. Finally, parameters, such as sensitivity, response time, recovery time and the limit of detection and accuracy, were evaluated for both types of sensors (BCZY-Pellet and BCZY-Crucible) at 500 °C., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Shaping Techniques' Influence on the Electrochemical Properties of BaCe0.6Zr0.3Y0.1O3-δ proton conductor

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen's significance as a clean and high-energy source spans various industries, driving advancements in fuel cell technology, transportation, and renewable energy storage systems. In particular, solid-state proton conductors like perovskite-type materials exhibit promising attributes for applications such as fuel cells and hydrogen sensors. However, conventional shaping techniques like uniaxial pressing impose limitations on device scalability and geometry. To address these challenges, alternative methods are gaining traction, like cold isostatic pressing or additive manufacturing. Each technique offers distinct advantages in shaping materials, impacting their structural and morphological properties. In this study, pellets of BaCe0.6Zr0.3Y0.1O3-δ (BCZY) solid-state electrolyte were fabricated using four different shaping techniques: uniaxial pressing, cold isostatic pressing, 3D extrusion, and lithography. Characterization via X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopy provided insights into changes in crystalline structure, sintering quality, and electrochemical properties, respectively., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

BaCe0.6Zr0.3Y0.1O3-α electrochemical hydrogen sensor for fusion applications

  • Hinojo, Antonio
  • Lujan, Enric
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Potentiometric sensors are broadening their application scope because they are affordable and scalable devices capable of being used in-field and online. In that frame, the use of proton-conducting solid-state electrolytes in these sensors architecture offers the possibility to operate at high temperatures, with high physical and chemical stabilities. A potential application for this kind of sensor is tritium monitoring in future fusion reactors. The first steps toward the development of this analytical tool will be devices capable of measuring hydrogen in high temperature applications In the present work, a potentiometric sensor based on BaCe0.6Zr0.3Y0.1O3-α (BCZY) solid-state proton-conductor was tested for hydrogen monitoring at 325 °C, 350 °C and 375 °C. BCZY was synthesized by the solid-state method and characterized using XRD. The sensor's linear range, accuracy and limit of detection were evaluated at the selected temperatures (325 °C, 350 °C and 375 °C). Moreover, sensors presented a very short response and recovery times (<100 s)., info:eu-repo/semantics/acceptedVersion