Pasar al contenido principal

DESAROLLO DE SENSORES ELECTROQUIMICOS PARA SU APLICACION EN FUSION

PID2022-140347OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT RAMON LLULL, FUNDACIO PRIVADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part II: Dual-mode simultaneous quantification of H2 and D2 in gas mixtures

  • Lujan, Enric
  • Hinojo, Antonio
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Achieving effective fusion energy generation on Earth necessitates precise quantification of deuterium and tritium fuel. This is critical in various stages of the reaction process in Tokamak-type reactors, such as ITER or EU-DEMO. Accurate, rapid, and reliable measurement of tritium in the Tritium Extraction System (TES) and determining the proportions of deuterium and tritium in the fuel cycle system are particularly important. However, due to the significant similarities between these isotopes, current measurement tools reported in bibliography face challenges in distinguishing them when mixed. Electrochemical sensors based on proton-conducting materials exhibit high sensitivity and can operate at temperatures up to 1000°C. These materials have shown proton, deuteron, and triton conductivity, making them suitable for hydrogen quantification under the conditions of the TES and fuel cycle systems. In the present work, it is proposed a combined potentiometric and amperometric sensor to be able to quantify hydrogen and deuterium simultaneously from a mixture of both. The device was tested at 500°C in mixed hydrogen and deuterium atmospheres, demonstrating the feasibility of simultaneous isotope quantification., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

A novel solution for hydrogen monitoring in fusion processes: 3D printed BaCe0.6Zr0.3Y0.1O3-α sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Abella, Jordi
  • Colominas, Sergi
The control of tritium (3H) in liquid-based tritium breeding blankets (TBBs) is one of the key points to assure their correct performance to prove the 3H sufficiency. For that, electrochemical sensors are a good option for tritium quantification since they can perform in-situ and online measurements. One of the multiple challenges for hydrogen detection is to find suitable materials that can operate at high temperatures and in harsh environments. In this context, perovskite-type ceramics, such as BaCe0.6Zr0.3Y0.1O3-α (BCZY), have elevated proton conductivity and exceptional stability even in reducing atmospheres and at elevated temperatures, which make them strong contenders for high-temperature hydrogen sensing applications. In the present study, we describe the development of a dual-mode hydrogen sensors based on 3D-printed BCZY, which allows a high degree of design flexibility. Crucible geometries were tested and characterized using X-ray diffraction and scanning electron microscopy. Electrochemical sensors were constructed and characterized at 400, 450 and 500 °C in both, amperometric and potentiometric configuration. The results demonstrated the capability of 3D-printed BCZY sensors for hydrogen detection in fusion reactors, offering a breakthrough solution for monitoring fusion processes., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part I: Modulating isotopic detection through surface engineering with graphene

  • Lujan, Enric
  • Hinojo, Antonio
  • Sala Bascompte, Neus
  • Verdaguer, Ariadna
  • Colominas, Carles
  • Colominas, Sergi
  • Abella, Jordi
Hydrogen and its isotopes are presented as an interesting alternative to fossil fuels because it is intended to use these species in the field of nuclear fusion, and in fields such as fuel cell technology, among others. To this end, the availability of sensors that can measure these isotopes in-situ and online is a key point for the correct development of these technologies. Electrochemical sensors based on solid-state electrolytes have been proved to be able to operate at elevated temperatures, with great physical and chemical stabilities. In this work, electrochemical sensors were constructed and tested using BaCe0.6Zr0.3Y0.1O3-α electrolytes. To achieve different isotopic responses, a graphene layer was transferred onto the surface of the working electrode. The sensors (with and without graphene) were used in a potentiometric and amperometric configuration at 500 °C. Analyte concentrations in the working electrode ranged from 0.12 to 1 mbar of H2 or D2 in Ar. The presence of graphene produced different sensor responses depending on the isotope. In addition, differences in response and recovery times were also observed, being both higher for the sensors with graphene., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Development and characterization of electrochemical hydrogen sensors using different fabrication techniques

  • Hinojo, Antonio
  • Lujan, Enric
  • Abella, Jordi
  • Colominas, Sergi
Tritium Breeding Modules (TBMs) aim to demonstrate tritium self-sufficiency for future fusion reactors. These modules operate at high temperatures, requiring stable, real-time and high-temperature monitoring of the tritium production and its related safety aspects. Electrochemical sensors based on perovskite-type materials are great candidates since they present good chemical stability and mechanical strength, among others. This work describes the development of electrochemical hydrogen sensors based on perovskite-type ceramic BaCe0.6Zr0.3Y0.1O3-α (BCZY). Two different technologies were used for the ceramic shaping: Cold isostatic pressing (CIP) and 3D printing. CIP was selected as a well-established technique known for its effectiveness in ceramic shaping. On the other hand, 3D printing was chosen for its suitability in determining the desired geometry through rapid and efficient prototyping. The response of the sensors was evaluated at 400, 500 and 600 ºC using hydrogen calibration mixtures in argon in a potentiometric mode. These results suggest that both, CIP and 3D-printed BCZY sensors have the ability to detect hydrogen in these environments, enabling a game-changing solution for monitoring fusion processes which require the quantification of hydrogen isotopes., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Electrochemical response of Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ high-temperature hydrogen sensor

  • Lujan, Enric
  • Hinojo, Antonio
  • Abella, Jordi
  • Colominas, Sergi
Measuring tritium in fusion reactors like EU-DEMO is crucial for the functioning of the reactor and the helium-cooled lithium-lead (HCLL) breeding blanket breeding blanket. Electrochemical sensors can be a great option for the measurement of hydrogen and its isotopes since they have several advantages over other analytical methods, such as sensitivity, robustness, ease of operation, short-time measurement, portability, and on-site and real-time measurement. One of the main difficulties for hydrogen detection is to select materials that can withstand high temperatures and harsh conditions. In this situation, perovskite-type ceramics, such as Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ, show proton conductivity and remarkable stability under low-oxygen atmospheres and high temperatures. These characteristics make perovskite materials ideal candidates for the creation of high-temperature hydrogen sensors. In the present work, the proton-conducting perovskite Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ was synthesized by the glycine method (SCZY-gly). Then, disks of Ø13 mm were obtained by uniaxial pressure, followed by a sintering process at 1300 – 12 h The powder and the pellets were characterized using XRD and SEM analysis. The proton conductivity of the sintered elements was calculated using electrochemical impedance spectroscopy (EIS). Finally, amperometric measurements were performed at 500 °C and 600 °C using different hydrogen concentrations., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

ZnO Sintering aid effect on Proton Conductivity of BaCe0.6Zr0.3Y0.1O3-δ electrolyte for Hydrogen sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Proton-conducting solid-state electrolytes, including perovskite-type materials, hold promise for hydrogen sensor development. These sensors leverage the proton conductivity of such materials to detect hydrogen gas presence. However, achieving both high density for gas tightness and good protonic conductivity in these refractory materials can be challenging. In this study, we propose the preparation of dense pellets of BaCe0.6Zr0.3Y0.1O3-δ using ZnO as a sintering aid (BCZY-Zn). These pellets were extensively characterized using X-ray diffraction and electrochemical impedance spectroscopy and compared with pellets sintered without sintering aid (BCZY). Subsequently, BCZY-Zn electrolyte was utilized to fabricate amperometric sensors for hydrogen monitoring. Finally, amperometric measurements were conducted at 500°C while maintaining a voltage of 150 mV between electrodes. The sensors' performance was evaluated for hydrogen partial pressures ranging from 12 to 100 Pa within an argon atmosphere. Additionally, response and recovery times were calculated., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Optimization of 3D printing conditions for BaCe0.6Zr0.3Y0.1O3-δ in the construction of amperometric high-temperature H2 sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Colominas, Sergi
  • Abella, Jordi
Proton-conducting ceramics, particularly BaCe0.6Zr0.3Y0.1O3-δ (BCZY), are promising materials for hydrogen energy applications. However, traditional fabrication methods are limited in their ability to produce complex geometries. Extrusion-based 3D printing presents a promising alternative, enabling the fabrication of customized designs with the advantage of fast prototyping. This study optimized the slurry composition and 3D printing parameters for BCZY ceramics to fabricate pellets and one-end closed tubes for amperometric hydrogen sensors. Results showed that a paste with 83 % BCZY, 8.5 % water, and 8.5 % PEG400 yielded a density of 96 % after sintering at 1700 °C for 1 h. The nozzle diameter during printing was the most influential parameter affecting wall thickness. Sensors constructed from one-end closed tubes exhibited higher sensitivity (20,571 μm·mbar-1) and a broader linear range (0.010 - 0.050 mbar) compared to pellet-based sensors. 3D printing proves to be an effective method for producing BCZY ceramic components with tailored geometries for hydrogen sensing., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Shaping Techniques' Influence on the Electrochemical Properties of BaCe0.6Zr0.3Y0.1O3-δ proton conductor

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen's significance as a clean and high-energy source spans various industries, driving advancements in fuel cell technology, transportation, and renewable energy storage systems. In particular, solid-state proton conductors like perovskite-type materials exhibit promising attributes for applications such as fuel cells and hydrogen sensors. However, conventional shaping techniques like uniaxial pressing impose limitations on device scalability and geometry. To address these challenges, alternative methods are gaining traction, like cold isostatic pressing or additive manufacturing. Each technique offers distinct advantages in shaping materials, impacting their structural and morphological properties. In this study, pellets of BaCe0.6Zr0.3Y0.1O3-δ (BCZY) solid-state electrolyte were fabricated using four different shaping techniques: uniaxial pressing, cold isostatic pressing, 3D extrusion, and lithography. Characterization via X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopy provided insights into changes in crystalline structure, sintering quality, and electrochemical properties, respectively., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Garnet-type lithium sensors for the monitoring and control of Pb-Li alloys in tritium breeding modules

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
During the EU-DEMO conceptualization, eutectic Pb-Li was considered as the prime candidate liquid breeding material. Nonetheless, the conversion of lithium into tritium through the breeding reaction will result in a decrease in the lithium concentration within the alloy. Then, the monitoring of the lithium concentration in Pb-Li alloys is critical for the optimal Tritium Breeding Blanket (TBB) performance, as lithium affects dissolution of structural materials, tritium inventory and extraction rates. Garnet-like ceramics possess desirable properties for their use in lithium sensors, like high lithium-ion conductivity, good chemical stability, low thermal expansion coefficient, and great mechanical strength. For these reasons, electrochemical sensors based on garnet-type ceramics offer advantages for measuring lithium in molten Pb-Li alloys, such as high selectivity and fast response. This work presents the development of lithium sensors based on the garnet-type ceramic Li6BaLa2Ta2O12. The material was characterized by XRD and SEM, exhibiting good crystallinity and a homogeneous microstructure. The sensors were evaluated in a potentiometric configuration in molten Pb-Li alloys with lithium concentrations ranging from 3 to 35 at% Li. Potentiometric measurements were used to obtain correlations that allow the determination of the lithium activity in the lead–lithium alloys studied., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

ZnO Sintering aid effect on Proton Conductivity of BaCe0.6Zr0.3Y0.1O3-δ electrolyte for Hydrogen sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Proton-conducting solid-state electrolytes, including perovskite-type materials, hold promise for hydrogen sensor development. These sensors leverage the proton conductivity of such materials to detect hydrogen gas presence. However, achieving both high density for gas tightness and good protonic conductivity in these refractory materials can be challenging. In this study, we propose the preparation of dense pellets of BaCe0.6Zr0.3Y0.1O3-δ using ZnO as a sintering aid (BCZY-Zn). These pellets were extensively characterized using X-ray diffraction and electrochemical impedance spectroscopy and compared with pellets sintered without sintering aid (BCZY). Subsequently, BCZY-Zn electrolyte was utilized to fabricate amperometric sensors for hydrogen monitoring. Finally, amperometric measurements were conducted at 500°C while maintaining a voltage of 150 mV between electrodes. The sensors' performance was evaluated for hydrogen partial pressures ranging from 12 to 100 Pa within an argon atmosphere. Additionally, response and recovery times were calculated., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part II: Dual-mode simultaneous quantification of H2 and D2 in gas mixtures

  • Lujan, Enric
  • Hinojo, Antonio
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Achieving effective fusion energy generation on Earth necessitates precise quantification of deuterium and tritium fuel. This is critical in various stages of the reaction process in Tokamak-type reactors, such as ITER or EU-DEMO. Accurate, rapid, and reliable measurement of tritium in the Tritium Extraction System (TES) and determining the proportions of deuterium and tritium in the fuel cycle system are particularly important. However, due to the significant similarities between these isotopes, current measurement tools reported in bibliography face challenges in distinguishing them when mixed. Electrochemical sensors based on proton-conducting materials exhibit high sensitivity and can operate at temperatures up to 1000°C. These materials have shown proton, deuteron, and triton conductivity, making them suitable for hydrogen quantification under the conditions of the TES and fuel cycle systems. In the present work, it is proposed a combined potentiometric and amperometric sensor to be able to quantify hydrogen and deuterium simultaneously from a mixture of both. The device was tested at 500°C in mixed hydrogen and deuterium atmospheres, demonstrating the feasibility of simultaneous isotope quantification., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development and characterization of electrochemical hydrogen sensors using different fabrication techniques

  • Hinojo, Antonio
  • Lujan, Enric
  • Abella, Jordi
  • Colominas, Sergi
Tritium Breeding Modules (TBMs) aim to demonstrate tritium self-sufficiency for future fusion reactors. These modules operate at high temperatures, requiring stable, real-time and high-temperature monitoring of the tritium production and its related safety aspects. Electrochemical sensors based on perovskite-type materials are great candidates since they present good chemical stability and mechanical strength, among others. This work describes the development of electrochemical hydrogen sensors based on perovskite-type ceramic BaCe0.6Zr0.3Y0.1O3-α (BCZY). Two different technologies were used for the ceramic shaping: Cold isostatic pressing (CIP) and 3D printing. CIP was selected as a well-established technique known for its effectiveness in ceramic shaping. On the other hand, 3D printing was chosen for its suitability in determining the desired geometry through rapid and efficient prototyping. The response of the sensors was evaluated at 400, 500 and 600 ºC using hydrogen calibration mixtures in argon in a potentiometric mode. These results suggest that both, CIP and 3D-printed BCZY sensors have the ability to detect hydrogen in these environments, enabling a game-changing solution for monitoring fusion processes which require the quantification of hydrogen isotopes., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrochemical response of Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ high-temperature hydrogen sensor

  • Lujan, Enric
  • Hinojo, Antonio
  • Abella, Jordi
  • Colominas, Sergi
Measuring tritium in fusion reactors like EU-DEMO is crucial for the functioning of the reactor and the helium-cooled lithium-lead (HCLL) breeding blanket breeding blanket. Electrochemical sensors can be a great option for the measurement of hydrogen and its isotopes since they have several advantages over other analytical methods, such as sensitivity, robustness, ease of operation, short-time measurement, portability, and on-site and real-time measurement. One of the main difficulties for hydrogen detection is to select materials that can withstand high temperatures and harsh conditions. In this situation, perovskite-type ceramics, such as Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ, show proton conductivity and remarkable stability under low-oxygen atmospheres and high temperatures. These characteristics make perovskite materials ideal candidates for the creation of high-temperature hydrogen sensors. In the present work, the proton-conducting perovskite Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ was synthesized by the glycine method (SCZY-gly). Then, disks of Ø13 mm were obtained by uniaxial pressure, followed by a sintering process at 1300 – 12 h The powder and the pellets were characterized using XRD and SEM analysis. The proton conductivity of the sintered elements was calculated using electrochemical impedance spectroscopy (EIS). Finally, amperometric measurements were performed at 500 °C and 600 °C using different hydrogen concentrations., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part I: Modulating isotopic detection through surface engineering with graphene

  • Lujan, Enric
  • Hinojo, Antonio
  • Sala Bascompte, Neus
  • Verdaguer, Ariadna
  • Colominas, Carles
  • Colominas, Sergi
  • Abella, Jordi
Hydrogen and its isotopes are presented as an interesting alternative to fossil fuels because it is intended to use these species in the field of nuclear fusion, and in fields such as fuel cell technology, among others. To this end, the availability of sensors that can measure these isotopes in-situ and online is a key point for the correct development of these technologies. Electrochemical sensors based on solid-state electrolytes have been proved to be able to operate at elevated temperatures, with great physical and chemical stabilities. In this work, electrochemical sensors were constructed and tested using BaCe0.6Zr0.3Y0.1O3-α electrolytes. To achieve different isotopic responses, a graphene layer was transferred onto the surface of the working electrode. The sensors (with and without graphene) were used in a potentiometric and amperometric configuration at 500 °C. Analyte concentrations in the working electrode ranged from 0.12 to 1 mbar of H2 or D2 in Ar. The presence of graphene produced different sensor responses depending on the isotope. In addition, differences in response and recovery times were also observed, being both higher for the sensors with graphene., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Garnet-type lithium sensors for the monitoring and control of Pb-Li alloys in tritium breeding modules

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
During the EU-DEMO conceptualization, eutectic Pb-Li was considered as the prime candidate liquid breeding material. Nonetheless, the conversion of lithium into tritium through the breeding reaction will result in a decrease in the lithium concentration within the alloy. Then, the monitoring of the lithium concentration in Pb-Li alloys is critical for the optimal Tritium Breeding Blanket (TBB) performance, as lithium affects dissolution of structural materials, tritium inventory and extraction rates. Garnet-like ceramics possess desirable properties for their use in lithium sensors, like high lithium-ion conductivity, good chemical stability, low thermal expansion coefficient, and great mechanical strength. For these reasons, electrochemical sensors based on garnet-type ceramics offer advantages for measuring lithium in molten Pb-Li alloys, such as high selectivity and fast response. This work presents the development of lithium sensors based on the garnet-type ceramic Li6BaLa2Ta2O12. The material was characterized by XRD and SEM, exhibiting good crystallinity and a homogeneous microstructure. The sensors were evaluated in a potentiometric configuration in molten Pb-Li alloys with lithium concentrations ranging from 3 to 35 at% Li. Potentiometric measurements were used to obtain correlations that allow the determination of the lithium activity in the lead–lithium alloys studied., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Shaping Techniques' Influence on the Electrochemical Properties of BaCe0.6Zr0.3Y0.1O3-δ proton conductor

  • Hinojo, Antonio
  • Lujan, Enric
  • Verdaguer, Ariadna
  • Abella, Jordi
  • Colominas, Sergi
Hydrogen's significance as a clean and high-energy source spans various industries, driving advancements in fuel cell technology, transportation, and renewable energy storage systems. In particular, solid-state proton conductors like perovskite-type materials exhibit promising attributes for applications such as fuel cells and hydrogen sensors. However, conventional shaping techniques like uniaxial pressing impose limitations on device scalability and geometry. To address these challenges, alternative methods are gaining traction, like cold isostatic pressing or additive manufacturing. Each technique offers distinct advantages in shaping materials, impacting their structural and morphological properties. In this study, pellets of BaCe0.6Zr0.3Y0.1O3-δ (BCZY) solid-state electrolyte were fabricated using four different shaping techniques: uniaxial pressing, cold isostatic pressing, 3D extrusion, and lithography. Characterization via X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopy provided insights into changes in crystalline structure, sintering quality, and electrochemical properties, respectively., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel solution for hydrogen monitoring in fusion processes: 3D printed BaCe0.6Zr0.3Y0.1O3-α sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Abella, Jordi
  • Colominas, Sergi
The control of tritium (3H) in liquid-based tritium breeding blankets (TBBs) is one of the key points to assure their correct performance to prove the 3H sufficiency. For that, electrochemical sensors are a good option for tritium quantification since they can perform in-situ and online measurements. One of the multiple challenges for hydrogen detection is to find suitable materials that can operate at high temperatures and in harsh environments. In this context, perovskite-type ceramics, such as BaCe0.6Zr0.3Y0.1O3-α (BCZY), have elevated proton conductivity and exceptional stability even in reducing atmospheres and at elevated temperatures, which make them strong contenders for high-temperature hydrogen sensing applications. In the present study, we describe the development of a dual-mode hydrogen sensors based on 3D-printed BCZY, which allows a high degree of design flexibility. Crucible geometries were tested and characterized using X-ray diffraction and scanning electron microscopy. Electrochemical sensors were constructed and characterized at 400, 450 and 500 °C in both, amperometric and potentiometric configuration. The results demonstrated the capability of 3D-printed BCZY sensors for hydrogen detection in fusion reactors, offering a breakthrough solution for monitoring fusion processes., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization of 3D printing conditions for BaCe0.6Zr0.3Y0.1O3-δ in the construction of amperometric high-temperature H2 sensors

  • Hinojo, Antonio
  • Lujan, Enric
  • Colominas, Sergi
  • Abella, Jordi
Proton-conducting ceramics, particularly BaCe0.6Zr0.3Y0.1O3-δ (BCZY), are promising materials for hydrogen energy applications. However, traditional fabrication methods are limited in their ability to produce complex geometries. Extrusion-based 3D printing presents a promising alternative, enabling the fabrication of customized designs with the advantage of fast prototyping. This study optimized the slurry composition and 3D printing parameters for BCZY ceramics to fabricate pellets and one-end closed tubes for amperometric hydrogen sensors. Results showed that a paste with 83 % BCZY, 8.5 % water, and 8.5 % PEG400 yielded a density of 96 % after sintering at 1700 °C for 1 h. The nozzle diameter during printing was the most influential parameter affecting wall thickness. Sensors constructed from one-end closed tubes exhibited higher sensitivity (20,571 μm·mbar-1) and a broader linear range (0.010 - 0.050 mbar) compared to pellet-based sensors. 3D printing proves to be an effective method for producing BCZY ceramic components with tailored geometries for hydrogen sensing., info:eu-repo/semantics/publishedVersion