Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Process design and scale up for Al recovery from saline slags and zeolite production

  • Blanco, David
  • Jiménez Martín, Alejandro
  • Gil Bravo, Antonio
  • Vicente, Miguel Ángel
  • Martin, Mariano
This work presents the scale up and technoeconomic evaluation for waste management towards the recovery of aluminum and its use to produce a valuable adsorbent and catalyst. Experimental data for the performance of various stages, including lixiviation, basic extraction and zeolite synthesis are used for process design and scale up and a detailed process synthesis and technoeconomic evaluation is performed. The yield to product reaches 0.185 kg/kgrawmaterial and a valuable by-product, ammonia, is also obtained. For a production capacity of 212 kg/ h, the investment required is 9.4 M€ and the production costs for the zeolite add up to 5.22 €/kg. To make it competitive, a waste management fee of 0.64 €/kg is required. The effect of the scale on waste management shows an important reduction in the production costs. As a result, the process may be feasible both technically and economically if it is considered as part of the waste management strategy., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities PID2023-146231OB-I00, PID2023-146935OB-C21 and PID2023-146935OB-C22, and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through project 0011-4387-2023-000001. (MCIU/AEI/10.13039/501100011033/FEDER, EU) through projects.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

In situ synthesis of LaAlO3/SBA-15 from aluminum saline slags for CO2 capture at moderate temperatures

  • Muñoz Alvear, Helir Joseph
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This study investigates the in situ synthesis of lanthanum aluminate (LaAlO₃) perovskite supported on mesoporous SBA-15 silica (SBA-15) using aluminum (Al) extracted from saline slags with 1.0 M citric acid (CA1.0). The effect of LaAlO3 loading, synthesis pathway, and thermal conditions on the structural, morphological, and textural properties of the resulting materials was systematically evaluated. X-ray diffraction (XRD) analysis shows that CA1.0-derived composites containing 25–50 wt% LaAlO3 exhibit well-defined perovskite crystallinity, with optimal phase ordering at 25 wt%. In contrast, samples with 100 wt% LaAlO3 display attenuated silica signals and reduced crystallinity. Materials synthesized using HCl or commercial precursors (PC) fail to develop a well-defined LaAlO3 perovskite phase, demonstrating that CA plays a dual role as both Al extractant and chelating agent. This dual function promotes the co-complexation of Al3+ and La3+ ions and directs perovskite nucleation within the SBA-15 framework. Nitrogen physisorption analysis reveals an inverse correlation between LaAlO3 crystallinity and surface area. Lower LaAlO3 loadings (25–50 wt%) in CA1.0-derived materials yield dense perovskite domains with reduced surface areas (17–22 m2 g− 1 ), whereas 100 wt% samples retain higher surface areas (93 m2 g− 1 ) due to the presence of poorly crystalline, dispersed LaAlO3 phases that preserves mesoporosity. In contrast, PC-derived materials exhibit significantly higher surface areas (252–720 m2 g− 1 ), depending on the hydrothermal treatment temperature (100–160 ◦C), but fail to develop the targeted perovskite structure, highlighting the importance of precursor conditioning. SEM, HRTEM, EDX, and XPS analyses further indicate that HCl-treated samples maintain the fibrous tubular morphology of SBA-15 but show limited incorporation of La and Al, whereas CA-derived materials display more compact and aggregated morphologies. Overall, the results underscore the critical roles of CA in precursor coordination and phase control, the trade-off between LaAlO3 crystallinity and porosity, and the effect of hydrothermal conditions and precursor nature on the structural integration of functional perovskite domains. The CO2 adsorption capacity was evaluated at various temperatures, between 50 and 300 ◦C, and atmospheric pressure. The results indicate that the materials have a greater adsorption capacity at low temperatures, which corroborates that the interaction is physical in nature. At the same time, the CO2 adsorption capacity corresponds to the textural properties and the crystalline or amorphous character of the material. A larger specific surface area results in greater adsorption capacity, which is also favored when the material's structure is amorphous., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21 and 0011–4387–2023–000001. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis of MOF@aluminum saline slag-based composites for CO2 capture at moderate temperatures

  • Muñoz Alvear, Helir Joseph
  • Vicente, Miguel Ángel
  • Korili, Sophia A.
  • Gil Bravo, Antonio
Combining metal–organic framework (MOF) materials and aluminum-containing saline slag residues opens a promising research avenue. This approach reduces the environmental impact of aluminum production by integrating industrial waste in the development of advanced materials that adhere to circular economy principles. It also addresses some inherent stability issues observed in pure MOFs. This study is the first to propose the use of this industrial by-product as a cost-effective and environmentally friendly modulator for controlling the phase transition between MIL-96(Al) and MIL-110(Al). For the first time, novel MOFs composites (MOF@RW1*-n; n = 25, 50, 75% waste) and saline slag waste (RW1*)—a by-product of initial aluminum extraction in an acidic medium—were synthesized in situ by preparing the MOF on RW1* via hydrothermal treatment and subsequently tested as CO2 adsorbents at up to 225 ◦C and 80 kPa. The optimized RW1* content in the composite proved critical in determining the formation of specific crystalline structures (MIL-96(Al) or MIL-110(Al)), ultimately yielding hybrid materials with enhanced textural properties and thermal stability., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21, PID2023-146935OB-C22 and 0011-4387-2023-000001. HJM thanks the Universidad Pública de Navarra for a doctoral grant. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Emerging synthetic strategies, tunable properties, and multifunctional applications of metal-doped carbon dots: a review

  • Herrera, Elisa Gabriela
  • Gil Bravo, Antonio
  • Algarra González, Manuel
Because of its unique characteristics and numerous prospective uses, metal-doped carbon dots (M@CDs) are gaining more interest. Through orbital interactions between metal and carbon atoms, metal integration alters the electrical structure, nanostructure, and chemical makeup of carbon dots (CDs). These materials are extremely adaptable for a variety of applications since the addition of metal ions results in noticeable changes in optical, electrical, magnetic, and chemical behavior. The synthetic methods for creating M@CDs are outlined in this review, which also looks at the physicochemical characteristics of metal ions and provides examples of their use in biomedicine, sensing, imaging, and catalysis. Additionally, it describes the difficulties that M@CDs synthesis is currently facing and provides a prognosis for future advancements, paying special emphasis to new breakthroughs in multimodal biosensing that are aided by machine learning techniques., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/10.13039 /501100011033/FEDER, UE) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2021-122613OB-I00, PID2023-146935OB-C21 and 0011-4387-2023-000001 respectively. Open access funding provided by Universidad Pública de Navarra. EH thanks the Universidad Pública de Navarra for a post-doctoral María Zambrano grant, financed by the European Union-Next Generation EU. This article/publication is based upon work from COST Action CA21126 - Carbon molecular nanostructures in space (NanoSpace), supported by COST (European Cooperation in Science and Technology).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Recent developments in the use of carbon-based nanomaterials in cancer therapy

  • Algarra González, Manuel
  • Vinacua, Sara
  • Gil-Korilis, Adrián
  • Gil Bravo, Antonio
Cancer is one of the most complex health problems worldwide, demanding innovative approaches to achieve effective diagnosis, treatment and prevention. The field of nanomedicine, including nanomaterials and particularly carbon-based nanoparticles, has emerged as a promising candidate to transform cancer therapy. This review presents a landscape of carbon nanomaterial- and nanoparticle-based cancer interventions. First, a brief overview of the types of nanomaterials available is provided, including metal-based nanomaterials, mesoporous silicas, polymers and composites (most notably MXenes and metal-organic frameworks), proteins, and carbon-based nanomaterials, including carbon quantum dots. The latter have attracted significant attention due to their exceptional biocompatibility, tunable surface chemistry, and distinctive optical properties, making them ideal candidates for cancer diagnostic and therapeutic strategies. The second part of this review focuses on briefly presenting the various therapies developed with carbon-based nanomaterials including chemo, radio, immuno, targeted, hyperthermia, photodynamic, and photothermal therapies., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, UE) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2021-122613OB-I00, PID2023-146935OB-C21 and 0011–4387–2023–000001. Open access funding provided by Universidad Pública de Navarra. S.V. thanks Government of Navarra for technologists' recruitment (MRR-INVESTIGO Program). A.G-K. is supported by a grant from the Scientific Foundation of the Spanish Association Against Cancer (PPLAB247757GIL).