Pasar al contenido principal

DESARROLLO DE MATERIALES HIBRIDOS MEDIANTE VALORIZACION DE UN RESIDUO DEL RECICLAJE DEL ALUMINIO PARA LA CAPTURA Y CONVERSION CATALITICA DE CO2 A COMBUSTIBLES

PID2023-146935OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

How the pretreatment temperature of zeolitic catalysts can affect the reaction temperature of methanol to olefins and gasoline processes

  • Yunes, Simón
  • Rosas, Abel Gaspar
  • Gil Bravo, Antonio
The dehydration of methanol to produce light olefins and gasoline, known as MTO (methanol-to-olefins) process requires acidic catalysts that maintain their acidity at reaction temperatures. Zeolites, such as SAPOs and ZSM-5, are commonly used for this purpose due to their acidic centers. The initial step in these experiments involves the activation or pretreatment of these solids to remove physically adsorbed water from their pores. Inadequate pretreatment can lead to the destruction of the existing Brönsted sites through the dihydroxylation of surface -OH groups. Therefore, it is crucial to pretreat the zeolites properly to preserve the Brönsted sites. One method is to subject the fresh catalyst to programmed dehydration, which involves desorption at a controlled temperature while monitoring the appearance of water that results from Brönsted site dihydroxylation. The temperature at which the dehydration peak appears determines the optimal reaction temperature. The results presented in this work will demonstrate the progressive deactivation of the catalysts when the reaction temperature exceeds 400 °C., A.G. is grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through project PID2023-146935OB-C21.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Effect of the synthesis variables on the performance of Cu/Al2O3 catalysts for enhanced CO2 dry reforming and hydrogenation

  • Villarroel-Rocha, Jhonny
  • Gil Bravo, Antonio
The catalytic conversion of carbon dioxide (CO2) into value-added chemicals and fuels offers a sustainable approach to mitigating greenhouse gas emissions. Among the most promising strategies are dry reforming of methane (DRM) and CO2 hydrogenation to methanol, which yield syngas and methanol, respectively—key intermediates in synthetic fuel production. In this study, Cu/Al2O3 catalysts are synthesized by wet impregnation using γ-Al2O3 as the support, systematically varying synthesis parameters such as copper (Cu) loading (5–20 wt %), precursor salts (nitrate and acetate), solvents (water, methanol, ethanol), additives (citric acid), and additional treatments (hydrothermal and sonication), followed by thermal treatment at 300 ◦C. The catalysts are characterized by XRD, nitrogen (N2) adsorption–desorption, H2-TPR, HRTEM, and XPS to determine crystallinity, dispersion, redox behavior, and surface properties. Catalytic performance is subsequently assessed in both DRM (450–700 ◦C, 1 bar) and CO2 hydrogenation (200–325 ◦C, 30 bar). Results reveal that Cu dispersion, location, and oxidation state strongly depend on synthesis conditions and critically affect catalytic performance. The highest activities are achieved by catalysts prepared with copper nitrate precursors combined with citric acid-assisted impregnation or higher Cu loadings. These formulations demonstrate superior CuO dispersion, improved redox properties, and enhanced modification of the porous structure. This study highlights the critical influence of synthesis parameters in determining Cu/Al2O3 catalyst performance and offers valuable insights for designing multifunctional, efficient, and scalable systems for sustainable CO2 valorization., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/10.13039/ 501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21 and 0011-4387-2023- 000001. JVR thanks the Universidad Pública de Navarra for a post- doctoral María Zambrano grant, financed by the European Union-Next Generation EU.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Recent advances in the application of Ni-perovskite-based catalysts for the dry reforming of methane

  • Muñoz Alvear, Helir Joseph
  • Korili, Sophia A.
  • Gil Bravo, Antonio
Ni-based catalysts have been reported to be very efficient in methane reforming processes, surpassing some noble metals. In the particular case of methane reforming in the presence of carbon dioxide (dry reforming of methane, DRM), modifying and controlling the initial properties of the catalyst becomes crucial to resist carbon deposition and Ni metal sintering. This is because the DRM process is carried out at high temperatures. In this sense, perovskite-based catalysts are of special interest given that they are synthesized at high temperatures and, therefore, can conserve their properties during the reaction. Perovskites are represented by the general formula ABO3 or A2BO4. The properties of these oxides depend on the nature of metals A and B and their possible partial substitution, which allows control of their redox and acid/basic properties. This review delves into the thermodynamic and kinetic aspects of the DRM, highlighting that the properties of A and B can affect catalytic performance. Following this, the focus shifts to B-cation substitution, which can increase the catalytic performance of the catalyst via synergistic effects due to the formation of Ni metal alloys. Next, in an analogous manner, the analysis will examine A-cation substitution, which allows control over the acid/basic properties and, therefore, coke formation and deposition. Given the inherently low textural properties of perovskites, methods for enhancing these properties are also summarized. These methods encompass both direct improvements and deposition of the perovskites on a support. Finally, new lines of research focused on softening DRM reaction conditions and promoting the process at lower temperatures are also highlighted., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through projects PID2020-112656RB-C21 and PID2023-146935OB-C21. HJM thanks Universidad Pública de Navarra for a pre-doctoral grant. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Process design and scale up for Al recovery from saline slags and zeolite production

  • Blanco, David
  • Jiménez Martín, Alejandro
  • Gil Bravo, Antonio
  • Vicente, Miguel Ángel
  • Martin, Mariano
This work presents the scale up and technoeconomic evaluation for waste management towards the recovery of aluminum and its use to produce a valuable adsorbent and catalyst. Experimental data for the performance of various stages, including lixiviation, basic extraction and zeolite synthesis are used for process design and scale up and a detailed process synthesis and technoeconomic evaluation is performed. The yield to product reaches 0.185 kg/kgrawmaterial and a valuable by-product, ammonia, is also obtained. For a production capacity of 212 kg/ h, the investment required is 9.4 M€ and the production costs for the zeolite add up to 5.22 €/kg. To make it competitive, a waste management fee of 0.64 €/kg is required. The effect of the scale on waste management shows an important reduction in the production costs. As a result, the process may be feasible both technically and economically if it is considered as part of the waste management strategy., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities PID2023-146231OB-I00, PID2023-146935OB-C21 and PID2023-146935OB-C22, and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through project 0011-4387-2023-000001. (MCIU/AEI/10.13039/501100011033/FEDER, EU) through projects.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Removal of heavy metals from aqueous solutions by adsorption on zeolites synthesized from aluminum saline slags

  • Jiménez, Alejandro
  • Trujillano, Raquel
  • Rives, Vicente
  • Vicente, Miguel Ángel
  • Gil Bravo, Antonio
Three heavy metals (Cu2+, Cd2+ and Pb2+) were removed from aqueous solutions using zeolites prepared from saline slags, a very important waste generated during aluminum recycling. Zeolites were characterized by powder X-ray diffraction, thermal analysis, Fourier transform infrared spectroscopy, X-ray microfluorescence, element chemical analysis, nitrogen adsorption at -196 °C and electron microscopy. The textural and structural properties of X-type faujasite zeolite convert it in a promising adsorbent in aqueous streams. Removal of the heavy metals was evaluated in batch mode, studying the adsorbent dose, the initial concentration of the heavy metal, the selectivity of the solid in case of mixtures with various metal cations and the recyclability of the solid. The kinetic and equilibrium results were evaluated using both pseudo-first- and pseudo-second-order kinetics, and Langmuir, Freundlich and Toth equation isotherms for the equilibrium. The time needed to reach equilibrium was between 10 and 20 min. Faujasite was highly effective in removing Cu2+, Cd2+ and Pb2+ from aqueous solutions, much higher than analcime and pollucite, other two zeolites recently synthesized by us from aluminum slags, and used in this work for comparison purposes. The maximum adsorption capacity was 591 mg/g for Pb2+, 304 mg/g for Cu2+ and 279 mg/g for Cd2+., This research was funded by Spanish Ministry of Science, Innovation and Universities through Spanish Research Agency (Reference PID2023-146935OB-C21 and PID2023-146935OB-C22). AG is also grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through project PID2020-112656RB-C21.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Engineering metal-based layered double hydroxide catalysts for the valorization of CO2 into value-added chemicals

  • Boulahbal, Aziza Imene
  • Korili, Sophia A.
  • Gil Bravo, Antonio
Carbon capture and storage (CCS) and carbon capture and utilization (CCU) encompass a broad range of strategies and technologies aimed at mitigating CO₂ emissions into the atmosphere. These approaches typically involve the capture, concentration, pressurization, and injection of CO₂ from industrial facilities into deep geological formations. However, given the current limitations in sequestration capacity, chemical recycling of carbon through conversion is gaining attention as a more sustainable and economically viable alternative. This innovative approach transforms captured greenhouse gases into valuable products through specific catalytic processes designed for the synthesis of clean fuels, such as methanol and dimethyl ether, as well as key compounds such as urea, carbonates, and formic acid. Among the various technologies employed for CO₂ conversion – including electrocatalysis, photocatalysis, thermal catalysis, and hydrogenation – layered double hydroxides (LDHs) have attracted growing interest given their intrinsic CO₂ retention and transformation properties, ease of synthesis, and potential to be produced from industrial waste. Recent studies have highlighted the tunable properties of LDHs, which make them particularly suitable for applications in CO₂ valorization. However, there are still challenges to overcome in using these materials, such as: improving their chemical and thermal stability, increasing the adsorption rate and cyclic stability, as well as developing green, cheap, simple and efficient LDHs with a view to scalability and industrial production. This review provides a critical overview of synthetic methods for LDHs, with special emphasis on routes based on industrial waste, and examines the catalytic processes through which CO₂ can be transformed into valuable resources., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21 and 0011-4387-2023-000001. AIB thanks the Universidad Pública de Navarra for a doctoral grant. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optimal carbofuran degradation via CWPO in NOM-doped water by a framework Cu-doped aluminate perovskite catalyst derived from aluminum saline slags

  • Muñoz Alvear, Helir Joseph
  • Galeano, Luis Alejandro
  • Vicente, Miguel Ángel
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This study is the first to propose the synthesis of LayAl1–xCuxO3–δ perovskite catalysts using Al recovered from acid leaching of saline slags. The effect of parameters such as the La/Al molar ratio was explored during the synthetic process. A suite of characterization techniques¿including XRF, XRD, N2 adsorption, H2-TPR, FTIR, TGA-DTA, TEM, SEM, EDX, and XPS¿confirmed the successful synthesis of high-purity (up to 90 %) perovskites with La and O vacancies, and a high concentration of Cu(I) active sites dispersed within the perovskite lattice. The best catalyst was used to optimize the degradation of carbofuran (CBF) in water doped with synthetic dissolved natural organic matter (NOM) using the Fenton-like catalytic wet peroxide oxidation (CWPO) approach. The effects of catalyst concentration, H2O2 dose, and pH on catalytic performance were investigated. Degradation, mineralization (COD removal), and H2O2 consumption were maximized, while Cu leaching was minimized using a statistical desirability function for multiple responses. Optimal conditions were found to be a catalyst concentration (mg Cu/mg H2O2) of 0.234 (2.0 g L-1), an H2O2 dose of 73.3 % (0.73 times the stoichiometric dose for full COD mineralization), and a remarkable circumneutral pH of 6.2. Under these conditions, degradation reached 94.1 %, and COD mineralization was 51 % under room temperature. Notably, the perovskite catalyst exhibited remarkable stability during reuse in up to three cycles, as demonstrated by the low Cu leaching (<1.30 mg L-1)., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through projects PID2020-112656RB-C21 and PID2023-146935OB-C21. HJM thanks the Universidad Pública de Navarra for a doctoral grant. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

In situ synthesis of LaAlO3/SBA-15 from aluminum saline slags for CO2 capture at moderate temperatures

  • Muñoz Alvear, Helir Joseph
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This study investigates the in situ synthesis of lanthanum aluminate (LaAlO₃) perovskite supported on mesoporous SBA-15 silica (SBA-15) using aluminum (Al) extracted from saline slags with 1.0 M citric acid (CA1.0). The effect of LaAlO3 loading, synthesis pathway, and thermal conditions on the structural, morphological, and textural properties of the resulting materials was systematically evaluated. X-ray diffraction (XRD) analysis shows that CA1.0-derived composites containing 25–50 wt% LaAlO3 exhibit well-defined perovskite crystallinity, with optimal phase ordering at 25 wt%. In contrast, samples with 100 wt% LaAlO3 display attenuated silica signals and reduced crystallinity. Materials synthesized using HCl or commercial precursors (PC) fail to develop a well-defined LaAlO3 perovskite phase, demonstrating that CA plays a dual role as both Al extractant and chelating agent. This dual function promotes the co-complexation of Al3+ and La3+ ions and directs perovskite nucleation within the SBA-15 framework. Nitrogen physisorption analysis reveals an inverse correlation between LaAlO3 crystallinity and surface area. Lower LaAlO3 loadings (25–50 wt%) in CA1.0-derived materials yield dense perovskite domains with reduced surface areas (17–22 m2 g− 1 ), whereas 100 wt% samples retain higher surface areas (93 m2 g− 1 ) due to the presence of poorly crystalline, dispersed LaAlO3 phases that preserves mesoporosity. In contrast, PC-derived materials exhibit significantly higher surface areas (252–720 m2 g− 1 ), depending on the hydrothermal treatment temperature (100–160 ◦C), but fail to develop the targeted perovskite structure, highlighting the importance of precursor conditioning. SEM, HRTEM, EDX, and XPS analyses further indicate that HCl-treated samples maintain the fibrous tubular morphology of SBA-15 but show limited incorporation of La and Al, whereas CA-derived materials display more compact and aggregated morphologies. Overall, the results underscore the critical roles of CA in precursor coordination and phase control, the trade-off between LaAlO3 crystallinity and porosity, and the effect of hydrothermal conditions and precursor nature on the structural integration of functional perovskite domains. The CO2 adsorption capacity was evaluated at various temperatures, between 50 and 300 ◦C, and atmospheric pressure. The results indicate that the materials have a greater adsorption capacity at low temperatures, which corroborates that the interaction is physical in nature. At the same time, the CO2 adsorption capacity corresponds to the textural properties and the crystalline or amorphous character of the material. A larger specific surface area results in greater adsorption capacity, which is also favored when the material's structure is amorphous., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21 and 0011–4387–2023–000001. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Valorization of an industrial pollutant residue as a teaching tool: extraction of AI3+ from aluminum saline slag

  • Jiménez, Alejandro
  • Trujillano, Raquel
  • Korili, Sophia A.
  • Gil Bravo, Antonio
  • Vicente, Miguel Ángel
Aluminum is the most used non–ferrous metal. It can be recycled saving several natural resources, but generates large amounts of residues with a complex composition—still containing a valuable amount of aluminum, although also including contaminant compounds. The laboratory-scale valorization of an industrial aluminum residue is here used as a powerful didactic resource in Inorganic and Analytical Chemistry and related fields such as Chemistry, Chemical Engineering, Environmental Engineering, Materials Engineering, and related university degrees, since concepts like acid-base properties (particularly amphoterism), redox reactions, speciation diagrams, or solubility–precipitation concepts are applied. The students are encouraged to look for information on the topic, to teamwork, and to elaborate a well-written laboratory report. At the same time, this laboratory work introduces them to advanced laboratory techniques and to incorporate concepts of Circular Economy and various Sustainable Development Goals, educating the students with respect to the environment. Although focused on University studies, this manuscript also contains excellent ideas for secondary teachers to motivate STEM vocations, particularly for Chemistry and Chemical and Environmental Engineering, and is also ideal for being included in the preparation of future Secondary School teachers., This research was funded by Spanish Ministry of Science, Innovation and Universities through Spanish Research Agency (Reference PID2023-146935OB-C21 and PID2023-146935OB-C22).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

The valorization of an industrial pollutant residue as a teaching tool, part II: the preparation of hydrocalumite and its application as a catalyst for ibuprofen photoremoval

  • Jiménez, Alejandro
  • Misol, Alexander
  • Gil Bravo, Antonio
  • Vicente, Miguel Ángel
Aluminum is the most used non-ferrous metal, with a well-established recycling procedure, but this process also produces new residues. We recently proposed an integrated laboratory practice based on the recovery of aluminum from the slag generated during its recycling. Now, we expand upon this research by proposing the preparation of a layered material, namely hydrocalumite, from recovered Al3+. The synthesis of this solid, its characterization, and the use of the mixed oxides produced after its calcination for the photocatalytic removal of ibuprofen from aqueous solutions are structured as a laboratory practice for students in the last years of Chemistry, Chemical Engineering, Environmental Engineering, Materials Engineering, and related university or masters degrees. In this way, the work integrates material synthesis and characterization procedures with a practical introduction to catalysis photodegradation, incorporating key concepts of the Circular Economy and Sustainable Development Goals, and educating students with respect to the environment., This research was funded by the Spanish Ministry of Science, Innovation and Universities through the Spanish Research Agency (References PID2023-146935OB-C21 and PID2023-146935OB-C22).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Photodegradation of paracetamol on CaAlGa and ZnAlTi mixed metal oxides (MMO) synthesized via LDH from Al-saline slags

  • Jiménez, Alejandro
  • Guerra, Miguel
  • Pascual, Dana
  • Trujillano, Raquel
  • Rives, Vicente
  • Vicente, Miguel Ángel
  • Gil Bravo, Antonio
Preparation of CaAlGa and ZnAlTi mixed metal oxides (MMO) synthesized via CaAlGa–hydrocalumites and ZnAl–hydrotalcite impregnated with TiO2 using saline slags as aluminum source, is reported for the first time. The solids obtained by calcination at 750 ºC are highly crystalline and the photocatalytically active crystalline phases Ca12Al14-xGaxO33, ZnO, ZnAl2O4 and Zn2TiO4 have been identified. The MMO were used for the catalytic degradation of paracetamol under UV irradiation, obtaining good results for the removal of this emerging pollutant, reaching a removal above 90 % for the sample containing 25 % Ga3 +, under the optimum photodegradation conditions ([Paracetamol]0 = 40 mg/L and catalyst dose = 1 g/L), showing better results than the commercial photocatalyst TiO2–P25 from Degussa and other more complex catalysts based on MMO. In addition, this photocatalyst was submitted to a cyclic process study, finding that it maintained its performance after at least two cycles., This research was funded by Spanish Ministry of Science, Innovation and Universities through Spanish Research Agency (Reference PID2023-146935OB-C21 and PID2023-146935OB-C22). AG is also grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through project PID2020-112656RB-C21.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis of MOF@aluminum saline slag-based composites for CO2 capture at moderate temperatures

  • Muñoz Alvear, Helir Joseph
  • Vicente, Miguel Ángel
  • Korili, Sophia A.
  • Gil Bravo, Antonio
Combining metal–organic framework (MOF) materials and aluminum-containing saline slag residues opens a promising research avenue. This approach reduces the environmental impact of aluminum production by integrating industrial waste in the development of advanced materials that adhere to circular economy principles. It also addresses some inherent stability issues observed in pure MOFs. This study is the first to propose the use of this industrial by-product as a cost-effective and environmentally friendly modulator for controlling the phase transition between MIL-96(Al) and MIL-110(Al). For the first time, novel MOFs composites (MOF@RW1*-n; n = 25, 50, 75% waste) and saline slag waste (RW1*)—a by-product of initial aluminum extraction in an acidic medium—were synthesized in situ by preparing the MOF on RW1* via hydrothermal treatment and subsequently tested as CO2 adsorbents at up to 225 ◦C and 80 kPa. The optimized RW1* content in the composite proved critical in determining the formation of specific crystalline structures (MIL-96(Al) or MIL-110(Al)), ultimately yielding hybrid materials with enhanced textural properties and thermal stability., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, EU) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2023-146935OB-C21, PID2023-146935OB-C22 and 0011-4387-2023-000001. HJM thanks the Universidad Pública de Navarra for a doctoral grant. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Microwave-assisted rapid synthesis of CAU23 and MIL53 MOFs from an unusual aluminum source and their application in CO2 capture

  • Rodríguez-Miguel, Pablo
  • Jiménez, Alejandro
  • Misol, Alexander
  • Trujillano, Raquel
  • Muñoz Alvear, Helir Joseph
  • Gil Bravo, Antonio
  • Vicente, Miguel Ángel
This study presents the synthesis of CAU23 and MIL53 MOFs using saline slags as an aluminum source and evaluates the effect of microwave treatment on the preparation process. The saline slags underwent chemical treatment with HCl or NaOH to produce Al3+ or AlO2 − solutions, which were used for MOF synthesis while simultaneously reducing the hazardous nature of the waste. The MOF were characterized using several techniques as powder X–ray diffraction, FT–infrared spectroscopy, thermal analysis, N2 adsorption–desorption isotherms at − 196 ◦C, laser diffraction, and electron microscopy. The results demonstrate that these MOF types can be successfully synthesized from saline slags and that microwave treatment significantly reduces synthesis times; specifically, CAU23 was obtained after 90 min of microwave treatment (compared to 3 or 6 h under reflux), while MIL53 required only 5 min. Finally, the CO2 adsorption capacity was evaluated at several temperatures from 50 to 200 ◦C and up to 80 kPa, with the CAU23 series showing the highest results, ranging from 0.80 to 1.08 mmolCO2/g., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/10.13039/501100011033/FEDER, EU) through projects PID2023-146935OB-C21 and PID2023-146935OB-C22.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

ZnAl-MMO, synthesized with Al extracted from saline slags, combined with carbon nitride and gold nanoparticles for the catalytic photodegradation of antibiotic norfloxacin

  • Santamaría Arana, Leticia
  • Korili, Sophia A.
  • Gil Bravo, Antonio
  • López de Luzuriaga Fernández, José Manuel
  • Monge Oroz, Miguel
Mixed metal oxides (MMO) formed from Zinc-Aluminum Layered Double Hydroxides (LDH), synthesized with Al extracted from saline slags, were combined with carbon nitride with a simple vapor deposition method, to form 2D/2D heterostructured photocatalysts. Two calcination temperatures were tested for the synthesis of MMO (520 and 850 ºC) and their performance was tested for the degradation of the antibiotic norfloxacin under visible light. In addition, these catalysts were impregnated with gold nanoparticles (Au NPs) in two metal weight percentages (0.5 and 1 wt%) to evaluate if there was an improvement in the composites¿ catalytic performances. Samples were characterized by PXRD, TEM, XPS, TGA, FTIR, DRS and FL. Results obtained show that the introduction of Au NPs in the composite improves the degradation efficiency of norfloxacin and that, when the catalyst is capable of adsorbing the contaminant, a lower calcination temperature outperforms the benefits of the spinel presence., J. M. L. L. and M.M. thank the DGI MICINN/FEDER (project number PID2022–139739NB-I00 (AEI/FEDER, UE)), by “ERDF A way of making Europe” and ADER 2023-IIDI-00019 PHOTOCAT-BIOHIBRID. Authors from Universidad Pública de Navarra are grateful for financial support from the Spanish Ministry of Science and Innovation (AEI/MINECO) through project PID2023–146935OB-C21. L.S. thanks the Universidad Pública de Navarra for a post-doctoral Margarita Salas grant, financed by the European Union-Next Generation EU. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at Universidad de Zaragoza and M. Martínez de Ayuso, “Servicio de espectroscopía UPS-XPS” at Universidad de Málaga.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metal or non-metal doped carbon dots as catalysts for the photodegradation of 4-nitrophenol

  • Herrera, Elisa Gabriela
  • Gil Bravo, Antonio
  • Algarra González, Manuel
Dual-metal-doped carbon dots (M@CDs) containing NiFe and RuFe were generated through a one-step hydrothermal route and systematically characterized. Their catalytic performance toward the photodegradation of 4-nitrophenol (4-NP) under UV irradiation (¿ = 365 nm) was compared with that of undoped and non-metal (N- and S-doped) CDs. Both NiFe@CDs and RuFe@CDs displayed significantly enhanced catalytic efficiency, following pseudo-first-order kinetics, with NiFe@CDs achieving up to 94% degradation. The improvement is attributed to synergistic charge-transfer interactions between metallic dopants of various oxidation states, which promote charge separation and increase the availability of reactive species during the photodegradation., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/10.13039 /501100011033/FEDER, UE) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2021-122613OB-I00, PID2023-146935OB-C21 and 0011-4387-2023-000001. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Emerging synthetic strategies, tunable properties, and multifunctional applications of metal-doped carbon dots: a review

  • Herrera, Elisa Gabriela
  • Gil Bravo, Antonio
  • Algarra González, Manuel
Because of its unique characteristics and numerous prospective uses, metal-doped carbon dots (M@CDs) are gaining more interest. Through orbital interactions between metal and carbon atoms, metal integration alters the electrical structure, nanostructure, and chemical makeup of carbon dots (CDs). These materials are extremely adaptable for a variety of applications since the addition of metal ions results in noticeable changes in optical, electrical, magnetic, and chemical behavior. The synthetic methods for creating M@CDs are outlined in this review, which also looks at the physicochemical characteristics of metal ions and provides examples of their use in biomedicine, sensing, imaging, and catalysis. Additionally, it describes the difficulties that M@CDs synthesis is currently facing and provides a prognosis for future advancements, paying special emphasis to new breakthroughs in multimodal biosensing that are aided by machine learning techniques., The authors are grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/10.13039 /501100011033/FEDER, UE) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2021-122613OB-I00, PID2023-146935OB-C21 and 0011-4387-2023-000001 respectively. Open access funding provided by Universidad Pública de Navarra. EH thanks the Universidad Pública de Navarra for a post-doctoral María Zambrano grant, financed by the European Union-Next Generation EU. This article/publication is based upon work from COST Action CA21126 - Carbon molecular nanostructures in space (NanoSpace), supported by COST (European Cooperation in Science and Technology).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Surface tuning of a highly crystalline Ni/LaAlO3 perovskite catalyst obtained from aluminum saline slags using various synthesis methods for the dry reforming of methane

  • Muñoz Alvear, Helir Joseph
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This research presents the first synthesis of nickel-modified lanthanum aluminate (Ni/LaAlO3) perovskite from aluminum (Al) saline slag waste involving acid extraction. Two methods were employed to extract Al: a 2 M HCl aqueous solution (AH) and various citric acid (CA) aqueous solutions (0.5, 1.0, or 2.0 M). Three preparation methods (Pechini, modified citrate, and metal–organic gel) were evaluated to obtain the pure lanthanum aluminate (LaAlO3) phase. This study also investigated the effects of several factors, with some variations being observed depending on the methodology used. The factors analyzed were: (i) preparation method; (ii) type of Al precursor solution (either extracted using HCl or CA); (iii) ligand/cations molar ratio (La3 + + Al3+), ranging from 0.3 to 3.0; (iv) CA concentration; (v) molar ratio (La/Al), between 0.5 and 1.0; (vi) calcination temperature; and (vii) acid etching of the final materials with aqueous dilute nitric acid (HNO3). The results indicated that it is possible to obtain LaAlO3 perovskite using all three methodologies and the Al extracted from saline slags. For the Pechini and metal–organic gel methods, ligand/cations molar ratios (La3+ + Al3+) of 3.0 and between 0.3 (with CA) and 1.5 (with AH), respectively, were obtained, while a CA concentration of 1.0 M was used for the modified citrate method. The optimal molar ratio (La/Al) for obtaining the perovskite was 1.0 in all three methods. The perovskite was synthesized at low temperatures, starting from 650 °C, and was obtained in a completely pure form at between 950 and 1050 °C. Treatment with aqueous dilute acid had a marked effect, especially on the materials obtained when using the initial solution extracted with 2.0 M HCl. This treatment was particularly beneficial for the material prepared using the Pechini method, which induced a 2.5-fold increase in the specific surface area and total pore volume without affecting the crystalline structure, and allowed the specificity of the nickel (Ni) active sites incorporated to be directed, particularly towards a higher proportion of β1 reducible species. This result improved the catalytic performance in the dry reforming of methane (DRM) reaction, achieving conversions of up to 73 % in CO2 and up to 70 % in CH4, with average selectivity of 0.93 after 20 h of reaction. These outcomes even surpassed the reference catalyst, which was entirely prepared using commercial-grade reagents. Factors such as the presence of other metals in the slag and the versatility of cationic substitution contributed to enhancing the physicochemical properties of the catalysts. Ultimately, all of this led to suppression of the formation of double-walled filamentous carbon deposits, which tend to deactivate the catalyst due to sintering and deformation of the active phase., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through projects PID2020-112656RB-C21 and PID2023-146935OB-C21.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Recent developments in the use of carbon-based nanomaterials in cancer therapy

  • Algarra González, Manuel
  • Vinacua, Sara
  • Gil-Korilis, Adrián
  • Gil Bravo, Antonio
Cancer is one of the most complex health problems worldwide, demanding innovative approaches to achieve effective diagnosis, treatment and prevention. The field of nanomedicine, including nanomaterials and particularly carbon-based nanoparticles, has emerged as a promising candidate to transform cancer therapy. This review presents a landscape of carbon nanomaterial- and nanoparticle-based cancer interventions. First, a brief overview of the types of nanomaterials available is provided, including metal-based nanomaterials, mesoporous silicas, polymers and composites (most notably MXenes and metal-organic frameworks), proteins, and carbon-based nanomaterials, including carbon quantum dots. The latter have attracted significant attention due to their exceptional biocompatibility, tunable surface chemistry, and distinctive optical properties, making them ideal candidates for cancer diagnostic and therapeutic strategies. The second part of this review focuses on briefly presenting the various therapies developed with carbon-based nanomaterials including chemo, radio, immuno, targeted, hyperthermia, photodynamic, and photothermal therapies., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIU/AEI/10.13039/501100011033/FEDER, UE) and the Government of Navarra (Department of Rural Development and Environment, Waste Fund 2023) through projects PID2021-122613OB-I00, PID2023-146935OB-C21 and 0011–4387–2023–000001. Open access funding provided by Universidad Pública de Navarra. S.V. thanks Government of Navarra for technologists' recruitment (MRR-INVESTIGO Program). A.G-K. is supported by a grant from the Scientific Foundation of the Spanish Association Against Cancer (PPLAB247757GIL).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Enhancing adsorptive performance of Cu-Al layered double hydroxides from aluminum saline slags: Insights from response surface methodology and molecular dynamic simulation

  • Boulahbal, Aziza Imene
  • Santamaría Arana, Leticia
  • Bourzami, Riahd
  • Bendrihem, Aymene Salah
  • Boutahala, Mokhtar
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This study aims to optimize the adsorption process of gallic acid (GA) on Cu-Al layered double hydroxides (LDHs) synthesized via a co-precipitation method at various pH levels. The procedure is based on the adsorption of organic pollutants from aqueous solutions, with evaluations carried out based on operational parameters such as pH, initial concentration, and adsorbent quantity. Two series of LDHs were compared: one using aluminum extracted from saline slags and the other using a commercial aluminum salt as source of aluminum. Saline slags, a by-product of aluminum recycling, are particularly hazardous due to their high toxicity and potential for environmental contamination. Extracting aluminum from these slags and using it in the synthesis of LDHs not only helps in eliminating a dangerous waste but also creates materials with beneficial environmental applications. The adsorption process was optimized using response surface methodology (RSM) coupled with Box- Behnken design (BBD) to assess the effects of key operational parameters. Besides gallic acid, other organic pollutants such as diclofenac and salicylic acid were also evaluated for removal from aqueous solution. The LDH /LDO were characterized by X-ray diffraction (XRD), ATR infrared spectroscopy (ATR-IR), scanning and transmission electron microscopy (SEM/TEM), thermogravimetric analysis (TGA), and nitrogen adsorption at -196ºC. The merit data indicate that the material synthesized at pH = 9 with extracted aluminum exhibits superior adsorption capacity for gallic acid, demonstrating the highest removal rate, nearly reaching 100 %, and achieving equilibrium more quickly than other samples. This superior adsorption performance is also notable for salicylic acid and diclofenac. After four regeneration cycles, the adsorption rate of the adsorbent remains stable, indicating that CCA9 maintains a consistent and efficient adsorption performance. This highlights the robustness of the material and its high reusability in prolonged adsorption applications. Molecular dynamics simulations (MDS) revealed that the adsorption process occurs spontaneously, driven by weak interactions: van der Waals, intermolecular, hydrogen bonding, π-interactions and short contacts., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) through projects PID2020-112656RB-C21 and PID2023-146935OB-C21. AIB thanks Universidad Pública de Navarra for a pre-doctoral grant. LS thanks the Universidad Pública de Navarra for a post-doctoral Margarita Salas grant, financed by the European Union-Next Generation EU.