Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pass conversion of syngas to BTX/para-xylene aromatics over tandem oxide-zeolite catalysts based on large crystal size HZSM-5

  • Murciano Martínez, Raúl
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] The one-pass conversion of renewable syngas into aromatics, particularly to BTX (benzene, toluene, xylenes) and para-xylene (PX), represents a promising approach to produce high-value sustainable chemicals from non-fossil resources. In this work, a systematic study of the modification of HZSM-5 zeolite by surface silylation and incorporation of MgO was performed aiming at maximising the BTX and PX selectivity in the syngas-to-aromatics (STA) reaction using tandem Zn-ZrO2+HZSM-5 catalysts following the methanol route. A zeolite with unusually large crystal size was purposedly used to intensify the shape selectivity effect. This zeolite exhibited high BTX selectivity (53.0 % in aromatics) albeit poor stability with TOS. Generation of a proper amount of mesopores via controlled desilication improved the catalyst stability and the aromatics selectivity (from 59.2 % up to 73.2 %) at the cost of lowering the BTX selectivity. Effective passivation of the external Br & Oslash;nsted acid sites was reached by submitting the mesoporous zeolite to four silylation cycles with TEOS. The silylation treatment significantly raised the BTX selectivity to 52.1 % while maintaining high selectivity of total aromatics (67.9 %), but had only a moderate positive effect on PX selectivity. Incorporation of Mg species in the silylated zeolite produced the largest impact on PX selectivity, attaining an outstanding value of 76.8 % in xylenes (41.2 % in aromatics) upon loading 3 wt% Mg., This work has received European Union's Horizon 2020 Research and Innovation funding under grant agreement N degrees 101000790 (CO2SMOS project) . Funding by the Generalitat Valenciana through Prometeo CIPROM/2022/10 project, the MICIU/AEI of Spain through PICKET project (PID2022-13966OB-I00) , and EuropeanNextGenerationEU (PRTR-C17.11) within the Green Hydrogen and Energy Program-CSIC and CSIC Interdisciplinary Thematic Platform Transicion Energetica Sostenible+ (PTI-TRANSENER+) is acknowledged. The authors are also thankful to the Microscopy Service of the Universitat Politecnica de Valencia (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In situ high temperature X-ray diffraction and dilatometric analysis of CGO-Cu composites for solid oxide devices

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Kriele, A.
  • Stark, A.
  • Solis, C.
[EN] Understanding the thermo-mechanical compatibility of composite electrodes is essential for the long-term reliability of solid-oxide electrochemical devices. In this study, we demonstrate a combined in situ synchrotron X-ray diffraction (XRD) and simultaneous dilatometry approach as a rapid and predictive method to quantify both phase-resolved and bulk thermal expansion while tracking microstructural evolution at operational temperatures. Ce0.8Gd0.2O2-delta-Cu (CGO-Cu) composites with varying CGO: Cu ratios (39:61-70:30 vol%) were synthesized as potential anode materials compatible with CGO electrolytes up to 800 degrees C. In situ XRD confirmed only the CGO and Cu phases, with Rietveld refinement revealing a slight lattice expansion and reduced CGO crystallite size with increasing CGO content. Concurrent dilatometry indicated systematic changes in the macroscopic thermal expansion and densification behavior, which correlated with the phase and microstructural evolution observed during heating. The CGO-Cu (59:41) composite exhibited a nearly temperature-independent coefficient of thermal expansion consistent with the rule-of-mixtures predictions and minimal high-temperature shrinkage. These findings validate the combined in situ synchrotron XRD + dilatometry methodology as a powerful approach for characterizing and capturing the TEC characteristics of cermets, and for guiding the design of thermomechanically compatible oxide-metal composites for high temperature electrochemical applications., Open Access funding enabled and organized by Projekt DEAL. This research was supported by the Deutsches Elektronen-Synchrotron (DESY, Hamburg, Germany), which provided synchrotron radiation beam time (proposal I-20220786 EC); by the European Union s Horizon 2020 Research and Innovation Program under the CO2SMOS project (grant agreement N° 101000790); by the Spanish Government through the CEX2021-001230-S grant funded by MCIN/AEI/https://doi.org/10.13039/501100011033); and by the Spanish National Research Council (CSIC) under the project PIE 20238AT016.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Consorcios microbianos en aplicaciones industriales

  • Barriuso, Jorge
1 p., La actividad humana en el planeta genera un gran volumen de residuos que en muchas ocasiones son contaminantes y difíciles de gestionar, entre los más abundantes se encuentran los derivados de la agricultura (e.g. biomasa lignocelulósica) y los derivados de la industria (e.g. CO2 y plásticos). Por otra parte, nuestra actividad productiva necesita disminuir su dependencia del petróleo para obtener productos químicos, materiales y combustibles. En el marco de la economía circular los residuos agro-industriales pueden ser utilizados como sustratos renovables y transformados en productos de valor añadido, como biopolímeros y biocombustibles, utilizando herramientas biotecnológicas.El uso de microorganismos en aplicaciones industriales normalmente se restringe a monocultivos o al uso de sus enzimas de forma aislada. En nuestro laboratorio, utilizando herramientas de la biología sintética y de sistemas, explotamos el potencial de consorcios microbianos compuestos por organismos con distintas capacidades metabólicas. Aprovechamos y fomentamos las capacidades naturales de estos microorganismos para cooperar, estudiamos el comportamiento del microbioma, y diseñamos consorcios “sintéticos” con distintas aplicaciones biotecnológicas.En este trabajo se presentará como hongos saprófitos, con un amplio arsenal de enzimas degradativas,y bacterias ambientales, con un metabolismo versátil, pueden asociarse y coordinar sus actividades metabólicas utilizando mecanismos de comunicación célula a célula conocidos como mecanismos de quorum sensing. Estos consorcios pueden formar biofilms catalíticos, lo que mejora los procesos de biocatálisis degradando residuos agro-industriales y produciendo compuestos de valor añadido. Actualmente trabajamos en la modificación genética y modelado, tanto metabólico como ecológico,de estos consorcios para mejorar su eficacia., Proyectos BIO2015-73697-JIN (MINECO/FEDER), MINECO/FEDER BIO2015-68387-R, CM S2013/MAE-2907, S2018/EMT-4459, IBISBA1.0 (H2020 730976), BioSFerA (H2020 884208) and CO2SMOS (H2020 101000790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering Pseudomonas putida for the Production of 2,3-Butanediol Isomers and Acetoin

  • Cano, Irene
  • de la Torre, Isabel
  • Acedos, Miguel G.
  • Barriuso, Jorge
  • García-López, Jose L.
The strain Pseudomonas putida KT2440 has been genetically modified to synthesize 2,3-butanediol (2,3-BDO). To achieve this goal, we have used as a host the P. putida KT2440 acoB::mini-Tn5 mutant unable to mineralize acetoin and 2,3-BDO. This strain has been further engineered by overexpressing in the pIZ2 plasmid, using the inducible promoter Ptrc, the budABC operon from Klebsiella oxytoca, which encodes the three enzymes required to transform pyruvate into 2,3-BDO. Flask and bioreactor experiments were carried out for the optimization of the 2,3-BDO production using acetate or glucose as substrates, which was highly dependent on the initial substrate concentration and the optimal oxygen supply. Using glucose in a fed-batch bioreactor enabled the highest diol (i.e., 2,3-BDO stereoisomers and acetoin) yield, attaining a concentration of 16 g/L, while the maximum production of diols in a fed-batch using acetate as a substrate was 1 g/L. The recombinant P. putida KT2440 acoB::mini-Tn5 (pIZ2Bud) showed a high tolerance to furfural, a contaminant produced after lignocellulose pretreatment, which can facilitate the production of 2,3-BDO from this residue. This is the first report on P. putida for the production of 2,3-BDO, which may contribute to facilitating the use of this chassis at an industrial scale., This work has been funded by the European projects CO2SMOS (H2020 101000790) and Mi-Hy (PATHFIN DERCHALLENGES-01 EIC 101114746)., Peer reviewed, Modelo experimental alternativo-NAM, Organismos alternativos no vertebrados - Microorganismos Unicelulares - Bacterias