Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Insights into Ni3TeO6 calcination via in situ synchrotron X-ray diffraction

  • Wang, Shubo
  • Fernández-Catalá, Javier
  • Shu, Qifeng
  • Huttula, Marko
  • Cao, Wei
  • Singh, Harishchandra
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
The versatility of metal tellurate chemistry enables the creation of unique structures with tailored properties, opening avenues for advancements in a wide range of applications. However, precise nanoengineering of Ni3TeO6, a ceramic Ni tellurate with a broad variety of properties, like electric, magnetic, photocatalytic and multiferroic properties, demands a deep understanding of the synthesis process, which is strongly influenced by experimental parameters. This study delves into the formation mechanism of Ni3TeO6 nanoparticles during calcination of hydrothermal produced precursors, using in situ synchrotron X-ray diffraction, complemented by post-mortem TEM and XPS, and thermal analysis. The results reveal a reaction sequence involving dehydration and dehydroxylation of a stoichiometric Ni/Te oxyhydroxide coordinated by Te. This oxyhydroxide can be schematically represented by a formula of (3Ni/Te)(OOH)4·H2O. Subsequently, preferential nucleation of trigonal Ni3TeO6 occurs. Further calcination after full crystallization of Ni3TeO6 leads to the formation of a different Ni tellurate (NiTeO4) phase as impurity. These findings clarify the reactions occurring during calcination of Ni/Te mixed precursors, which have frequently been inferred from empirical and post-mortem reports but not confirmed via comprehensive and in situ guided explorations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

g-C3N4-Based Direct Z-Scheme Photocatalysts for Environmental Applications

  • Fernández-Catalá, Javier
  • Greco, Rossella
  • Navlani-García, Miriam
  • Cao, Wei
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Photocatalysis represents a promising technology that might alleviate the current environmental crisis. One of the most representative photocatalysts is graphitic carbon nitride (g-C3N4) due to its stability, cost-effectiveness, facile synthesis procedure, and absorption properties in visible light. Nevertheless, pristine g-C3N4 still exhibits low photoactivity due to the rapid recombination of photo-induced electron-hole (e−-h+) pairs. To solve this drawback, Z-scheme photocatalysts based on g-C3N4 are superior alternatives since these systems present the same band configuration but follow a different charge carrier recombination mechanism. To contextualize the topic, the main drawbacks of using g-C3N4 as a photocatalyst in environmental applications are mentioned in this review. Then, the basic concepts of the Z-scheme and the synthesis and characterization of the Z-scheme based on g-C3N4 are addressed to obtain novel systems with suitable photocatalytic activity in environmental applications (pollutant abatement, H2 production, and CO2 reduction). Focusing on the applications of the Z-scheme based on g-C3N4, the most representative examples of these systems are referred to, analyzed, and commented on in the main text. To conclude this review, an outlook of the future challenges and prospects of g-C3N4-based Z-scheme photocatalysts is addressed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cu-Based Z-Schemes Family Photocatalysts for Solar H2 Production

  • Greco, Rossella
  • Botella, Romain
  • Fernández-Catalá, Javier
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
Solar photocatalytic H2 production has drawn an increasing amount of attention from the scientific community, industry, and society due to its use of green solar energy and a photocatalyst (semiconductor material) to produce green H2. Cu-based semiconductors are interesting as photocatalysts for H2 production because Cu is earth-abundant, cheap, and the synthesis of its copper-containing semiconductors is straightforward. Moreover, Cu-based semiconductors absorb visible light and present an adequate redox potential to perform water splitting reaction. Nevertheless, pristine Cu-based semiconductors exhibit low photoactivity due to the rapid recombination of photo-induced electron-hole (e−-h+) pairs and are subject to photo corrosion. To remedy these pitfalls, the Cu semiconductor-based Z-scheme family (Z-schemes and S-schemes) presents great interest due to the charge carrier mechanism involved. Due to the interest of Z-scheme photocatalysts in this issue, the basic concepts of the Z-scheme focusing on Cu-based semiconductors are addressed to obtain novel systems with high H2 photo-catalytic activity. Focusing on H2 production using Cu-based Z-schemes photocatalyst, the most representative examples are included in the main text. To conclude, an outlook on the future challenges of this topic is addressed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

One-pot hydrothermal synthesis of FeNbO4 microspheres for effective sonocatalysis

  • He, Min
  • Li, Defa
  • Liu, Yu
  • Li, Taohai
  • Li, Feng
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
FeNbO4 sonocatalysts were successfully synthesized by a simple hydrothermal route at pH conditions of 3, 5, 7, 9 and 11. The catalysts were characterized by XRD, XPS, TEM, SEM, N2 adsorption and DRS to analyse the effect of pH parameters on the physicochemical properties of the materials during hydrothermal synthesis. The sonocatalytic activity of FeNbO4 microspheres was evaluated by using acid orange 7 (AO7) as the simulated contaminant. The experimental results showed that the best sonocatalytic degradation ratio (97.45%) of organic dyes could be obtained when the conditions of initial AO7 concentration of 10 mg/L, ultrasonic power of 200W, catalyst dosage of 1.0g/L, pH=3. Moreover, the sonocatalysts demonstrated consistent durability and stability across multiple test cycles. After active species capture experiments and calculation of the energy band, a possible mechanism was proposed based on the special Fenton-like mechanism and the dissociation of H2O2. The research shows that FeNbO4 microspheres can be used as sonocatalysts for the purification of organic wastewater, which has a promising application prospect.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shape-Controlled Synthesis of Cu3TeO6 Nanoparticles with Photocatalytic Features

  • Fernández-Catalá, Javier
  • Jussila, Laura
  • Daboczi, Matyas
  • Temerov, Filipp
  • Eslava, Salvador
  • Greco, Rossella
  • Cao, Wei
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
Cu3TeO6 (CTO) has been synthesized by hydrothermal synthesis applying different pH values without any template or a calcination step to control the crystalline phase and the morphology of nanoparticles. The physicochemical properties characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, N2 adsorption, X-ray photoelectron spectroscopy, and diffuse reflectance ultraviolet–visible (DRUV–vis) spectroscopy techniques revealed that the pH values significantly influence the crystal growth. In acidic media (pH = 2), crystal growth has not been achieved. At pH = 4, the yield is low (10%), and the CTO presents irregular morphology. At pH = 6, the yield increases (up to 71%) obtaining an agglomeration of nanoparticles into spherical morphology. At basic conditions (pH = 8), the yield increases up to 90% and the morphology is the same as the sample obtained at pH = 6. At high basic conditions (pH = 10), the yield is similar (92%), although the morphology changes totally to dispersed nanoparticles. Importantly, the as-prepared CTO semiconductor presents photocatalytic activity for H2 production using triethanolamine as a sacrificial agent under visible light illumination. The results also revealed that the nanoparticles agglomerated in a spherical morphology with larger surface area presented almost double activities in H2 production compared to heterogeneously sized particles. These results highlight the suitable optoelectronic properties, including optical band gap, energy levels, and photoconductivity of CTO semiconductors for their use in photocatalytic H2 production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rapid, In Situ and Non-Destructive Analysis for the Evaluation of Microplastics Degradation in Water Via Haze Measurement

  • Greco, Rossella
  • Baxauli-Marin, Lucía
  • Fernández-Catalá, Javier
  • Pankratova, Viktorija
  • Bulbucan, Claudiu
  • Thånell, Karina
  • Cao, Wei
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
The presence of microplastics (MPs) in water represents a current problem for marine life and a future serious issue for human health. This is pushing towards new approaches for the removal of MPs and, hence, their characterization and evaluation, which up to now has represented a limit for tentative procedures for their degradation. Herein, we reported on a new facile, in situ and non-destructive approach for the qualitative analysis of polystyrene and polymethylmethacrylate MPs in water and their evaluation in photocatalytic degradation with the use of Co3O4@Co(OH)2 heterostructures. The use of haze measurements allows to see the changes in light scattering of the MPs aqueous dispersions during the photocatalytic degradation and to know in situ the degradation of the MPs in the catalytic process. Significant changes in haze values were found in photocatalysis with Co3O4@Co(OH)2, in contrast to no variations in control test using Co(OH)2 and Co3O4. Synchrotron-radiation based scanning transmission x-ray spectroscopy further denotes strong interactions between the heterostructures with MPs and oxidization of the latter. The possible comparison of different techniques suggests that haze measurements could be a valid and cost-efficient methodology for the future evaluation of photocatalytic degradation of MPs in water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly selective cathodic H2O2 electrosynthesis by a metal tellurate/carbon black composite material

  • Alemany Molina, Gabriel
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One sustainable alternative to the traditional anthraquinone technology to produce H2O2 is direct H2O2 electrosynthesis by oxygen reduction reaction (ORR). However, selecting electrocatalysts is a great challenge since most of the materials present selectivity towards the formation of H2O (4-electron pathway). In this work, we present a facile electrocatalyst preparation consisting of Ni3TeO6 (NTO), a metal tellurate, mixed with carbon black (Vulcan) with outstanding selectivity (2.2 transferred electrons) towards the production of H2O2 by ORR. To test the possible real application, the NTO/Vulcan catalyst was tested in a long-term stability test showing excellent faradaic efficiency and 93.5 % of the initial current. TEM and XPS measurements after reaction show that NTO/Vulcan materials are robust and durable electrocatalysts. This work opens the door of novel materials such as metal tellurates based on Ni for their application as ORR electrocatalysts in industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Highly selective cathodic H2O2 electrosynthesis by a metal tellurate/carbon black composite material"

  • Alemany Molina, Gabriel
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Facile hydrothermal synthesis and photocatalytic properties of g-C3N4/Cu3TeO6 heterostructures

  • Fernández-Catalá, Javier
  • Chávez-Caiza, Jonny
  • Greco, Rossella
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Cao, Wei
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chávez-Caiza, Jonny|||/items/9bae10f8-0899-4355-9c51-7f655c12ef6c
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In this work, we have developed, for the first time, heterostructures based on Cu3TeO6 (CTO) with a strong interaction with a well-studied g-C3N4 (GCN) semiconductor. This has been carried out to mitigate the drawbacks of CTO for its application as photocatalyst in H2 production. In this sense, the resulting heterostructure presented higher activity than the pure CTO and GCN (113, 85, and 42 µmolH2/mg, respectively). The methodology employed to synthesise the heterostructure was a hydrothermal synthesis on the surface of GCN to ensure a strong interaction between both materials by growing the CTO crystal in presence of GCN. The physicochemical characterisation of the materials by XRD TG, SEM, TEM, and FTIR revealed that the synthesis was successfully developed and that Cu3TeO6 grew on the g-C3N4 surface. Indeed, this novel synthesis of the heterostructure based on CTO has huge interest for its application in H2 production due to the redox capability of the materials, observed by UPS and UV–Vis spectroscopies. The enhancement of the catalytic activity of the heterostructure with respect to the pristine materials was associate to the strong interaction between both components, the catalytic effect of Cu species, and the improved charge transfer. Indeed, a lower e− − h+ pair recombination rate was observed by steady PL analysis with respect to the pristine GCN material. These results indicate that it is possible to synthesise heterostructures based on metal tellurates with improved catalytic activity of the mixture with respect to the pristine material in a relevant energy application such as H2 production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Experimental Ni3TeO6 synthesis condition exploration accelerated by active learning

  • Botella, Romain
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
Material synthesis is time- and chemicals-consuming due to the traditional (“brute force”) methodology. For instance, Ni3TeO6 (NTO) is a multiferroic material relevant in different applications. Herein, we used an active learning scheme to explore the different phases obtained using a complex hydrothermal synthesis procedure instead of a solid-state methodology. Different from conventional ML prediction requiring a large dataset, we show that with only 9 data points obtained through experimental endeavor, 87% of the experimental condition space is predicted. The predicted phase configuration is verified with the sample in a new synthetic work. Beside exploring the NTO species, scheme developed herein constitute a powerful tool for experimental condition optimization.