Pasar al contenido principal

Design and development of nanostructured catalysts for environmental applications

RYC2021-034199-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the synergistic effect of palladium nanoparticles and highly dispersed transition metals on carbon nitride/super-activated carbon composites for boosting electrocatalytic activity

  • Alemany Molina, Gabriel
  • Navlani-García, Miriam
  • Juan Juan, Jerónimo
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In the present work, multifunctional electrocatalysts formed by palladium nanoparticles (Pd NPs) loaded on Fe or Cu-containing composite supports, based on carbon nitride (C3N4) and super-activated carbon with a high porosity development (SBET 3180 m2/g, VDR 1.57 cm3/g, and VT 1.65 cm3/g), were synthesised. The presence of Fe or Cu sites favoured the formation of Pd NPs with small average particle size and a very narrow size distribution, which agreed with Density Functional Theory (DFT) calculations showing that the interaction of Pd clusters with C3N4 flakes is weaker than with Cu- or Fe-C3N4 sites. The electroactivity was also dependent on the composition and, as suggested by preliminary DFT calculations, the Pd-Cu catalyst showed lower overpotential for hydrogen evolution reaction (HER) while bifunctional oxygen reduction reaction/ oxygen evolution reaction (ORR/OER) behaviour was superior in Pd-Fe sample. The Pd-Fe electrocatalyst was studied in a zinc-air battery (ZAB) for 10 h, showing a performance similar to a commercial Pt/C + RuO2 catalyst with a high content of precious metal. This study demonstrates the synergistic effect between Pd species and transition metals and shows that transition metals anchored on C3N4-based composite materials promote the electroactivity of Pd NPs in HER, ORR and OER due to the interaction between both species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulating Pd/C catalysts with nitrogen and silver for formic acid dehydrogenation: Insights from XAS and DFT

  • Riquelme-García, Paula
  • Skorynina, Alina
  • Juan Juan, Jerónimo
  • Salinas-Torres, David
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Hydrogen production from formic acid is a promising route for clean energy, but it requires catalysts that are both active, selective, and stable. Here, we explore how nitrogen doping of the carbon support and interaction with silver tune the performance of Pd catalysts. Using XPS and EXAFS, we show that nitrogen groups promote the formation of Pd2+ species, decrease the Pd coordination number, and stabilize small nanoparticles that remain highly dispersed after reaction. The basic character of the doped carbon support also enhances interactions with key intermediates, contributing to the exceptional stability of these catalysts. In contrast, introducing Ag into Pd nanoparticles changes the electronic environment of Pd, as indicated by charge transfer in XPS and Pdsingle bondAg interactions detected by EXAFS, leading to a notable increase in catalytic activity. DFT calculations identify H2 desorption as the rate-limiting step and reveal that both electron density withdrawn by nitrogen atoms and the electron transfer of Ag ultimately weaken the Pdsingle bondH bond. Despite their opposite electronic effects, both modifications facilitate H2 release and boost the overall reaction rate. Taken together, our results show that nitrogen primarily enhances stability, while silver mainly increases activity, and that combining both provides a rational strategy for designing next-generation Pd catalysts for efficient hydrogen generation from formic acid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Upgrading of Lignocellulosic Biomass toward the Development of Advanced Carbon Materials for Environmental Applications

  • Navlani-García, Miriam
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Zhang, Ting
  • Bian, Zhenfeng
  • Li, Hexing
  • Yamashita, Hiromi
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
The use of biomass in the energy landscape has aroused great interest because of the diversity of high-value-added products that can be obtained. Among them, carbon materials stand out for properties such as their high chemical and thermal stability, large specific surface area, and possibility of modifying their surface properties by introducing heteroatoms, which make them ideal candidates for countless applications. The present review addresses to some of the representative works related to the preparation of advanced carbon materials prepared from biomass residues for applications of environmental interest, such as environmental remediation, catalytic processes, and energy-related devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Pd Catalysts Based on C3N4-Modified Activated Carbon Derived from Biomass Residues for the Dehydrogenation of Formic Acid"

  • Bernal-Vela, María|||/items/bc8b62c6-4a07-42d8-bb19-9badbde5f5aa
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unveiling the effect of sacrificial agent amount in the CO2 photoreduction performed in a flow reactor

  • Chávez-Caiza, Jonny
  • Fernández-Catalá, Javier
  • Navlani-García, Miriam
  • Lousada, Cláudio M.
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chávez-Caiza, Jonny|||/items/9bae10f8-0899-4355-9c51-7f655c12ef6c
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
The use of sacrificial agents in photocatalysis is a powerful resource to enhance the performance of photoactive materials. Despite its importance, the effect of the amount of sacrificial agent is not properly described in the literature. In this paper, we have focused on the role of EtOH in the photoreduction of CO2 to CH4 using Cu-P25 photocatalysts in a flow reactor. We found that the production of CH4 increased with the concentration of EtOH, achieving an outstanding CH4 production yield of 235 µmol/(g·h) for a flow of 0.25 µmol/min of EtOH in the gas stream, hinting at the important role of the sacrificial agent in the reaction. The catalytic results together with the characterization of the materials highlight the need to achieve a minimum surface coverage of EtOH on the surface of the catalyst to control the reaction pathway. The adsorption of EtOH is a key factor in boosting the catalytic activity of the best-performing catalyst and producing CH4 from CO2 photoreduction and C2H4O from the photooxidation of EtOH, obtaining two easily separable interesting products for industrial applications in one reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrogen Storage System Attained by HCOOH-CO2 Couple: Recent Developments in Pd-Based Carbon-Supported Heterogeneous Catalysts

  • Riquelme-García, Paula
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
The present review revisits representative studies addressing the development of efficient Pd-based carbon-supported heterogeneous catalysts for two important reactions, namely, the production of hydrogen from formic acid and the hydrogenation of carbon dioxide into formic acid. The HCOOH-CO2 system is considered a promising couple for a hydrogen storage system involving an ideal carbon-neutral cycle. Significant advancements have been achieved in the catalysts designed to catalyze the dehydrogenation of formic acid under mild reaction conditions, while much effort is still needed to catalyze the challenging CO2 hydrogenation reaction. The design of Pd-based carbon-supported heterogeneous catalysts for these reactions encompasses both the modulation of the properties of the active phase (particle size, composition, and electronic properties) and the modification of the supports by means of the incorporation of nitrogen functional groups. These approaches are herein summarized to provide a compilation of the strategies followed in recent studies and to set the basis for a hydrogen storage system attained using the HCOOH-CO2 couple.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for: "H2 production by celulose photoreforming with TiO2-Cu photocatalysts bearing different Cu species"

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
El fichero incluye los datos obtenidos del trabajo experimental que ha dado lugar a la publicación. El resumen del contenido de la misma es: TiO2-Cu photocatalysts (1 wt% Cu) containing different copper species have been prepared and used for the generation of hydrogen by photoreforming of cellulose (the major component of biomass) in water at room temperature using UV light. A positive effect of copper has been clearly observed, and the analysis of the role of the Cu species present shows that a mixture of Cu(I) and Cu(II) favors the process. Among the TiO2-Cu photocatalysts, the one prepared by a simple impregnation method and not heat-treated, which shows small and well dispersed copper species particles, gives the highest hydrogen production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Removal of Mo(VI), Pb(II), and Cu(II) from wastewater using electrospun cellulose acetate/chitosan biopolymer fibers

  • Lopez, Esmeralda
  • Gómez, Mauricio
  • Becar, Ian
  • Zapata, Paula
  • Pizarro, Jaime
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Presser, Volker
  • Gómez, Tatiana
  • Cárdenas, Carlos
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Environmentally friendly polymers such as cellulose acetate (CA) and chitosan (CS) were used to obtain electrospun fibers for Cu2+, Pb2+, and Mo6+ capture. The solvents dichloromethane (DCM) and dimethylformamide (DMF) allowed the development of a surface area of 148 m2 g−1 for CA fibers and 113 m2 g−1 for cellulose acetate/chitosan (CA/CS) fibers. The fibers were characterized by IR-DRIFT, SEM, TEM, CO2 sorption isotherms at 273 K, Hg porosimetry, TGA, stress-strain tests, and XPS. The CA/CS fibers had a higher adsorption capacity than CA fibers without affecting their physicochemical properties. The capture capacity reached 102 mg g−1 for Cu2+, 49.3 mg g−1 for Pb2+, and 13.1 mg g−1 for Mo6+. Furthermore, optimal pH, adsorption times qt, and C0 were studied for the evaluation of kinetic models and adsorption isotherms. Finally, a proposal for adsorbate-adsorbent interactions is presented as a possible capture mechanism where, in the case of Mo6+, a computational study is presented. The results demonstrate the potential to evaluate the fibers in tailings wastewater from copper mining.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the Effects Behind the Outstanding Catalytic Performance of PdAg Catalysts Supported on Almond Shell-Derived Activated Carbon Towards the Dehydrogenation of Formic Acid

  • Riquelme-García, Paula
  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
In this work, highly efficient carbon-supported Pd-based catalysts for formic acid dehydrogenation were synthesized by a straightforward wet impregnation-reduction method. The carbon support was obtained from a biomass residue (almond shell) prepared via H3PO4-assisted hydrothermal carbonization (HTC) and thermal activation. This carbon support was doped with nitrogen groups to study the effect on the electronic properties and catalytic performance of the catalysts. Investigating the formation of PdAg alloys with varying Pd:Ag molar ratios resulted in catalysts exhibiting enhanced catalytic activity compared to monometallic Pd counterparts. Notably, the Pd1Ag0.5/NAS catalyst displayed outstanding catalytic performance, achieving an initial TOF of 1716 h-1 (calculated in the first 3 minutes of reaction and expressed per mole of Pd) and maintaining substantial activity over 6 consecutive reaction cycles. This work elucidates the successful synthesis of effective catalysts, emphasizing the influence of nitrogen doping and PdAg alloy composition on catalytic behavior and stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Exploring the Effects Behind the Outstanding Catalytic Performance of PdAg Catalysts Supported on Almond Shell-Derived Activated Carbon Towards the Dehydrogenation of Formic Acid"

  • Riquelme-García, Paula
  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

CuxO-modified inkjet printed TiO2 thin films photocatalysts for hydrogen production from water splitting

  • Chávez-Caiza, Jonny
  • Navlani-García, Miriam
  • Fernández-Catalá, Javier
  • Bhardwaj, Anand
  • Lousada, Cláudio M.
  • Belova, Lyubov M.
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chávez-Caiza, Jonny|||/items/9bae10f8-0899-4355-9c51-7f655c12ef6c
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
For the past decades, the scientific community has attempted to develop photocatalysts to obtain green hydrogen to diversify the current energy vectors, largely based on fossil fuels. In this context, many researchers have focused on modifying well-known photocatalysts such as TiO2 using other transition metals to boost photocatalytic activity in H2 production. However, powdered materials are difficult to reuse after prolonged exposure to liquid media in photocatalytic reactors. In this work, we have taken an alternative approach by developing structured catalysts based on TiO2 thin films and different Cu species. Photoluminescence analysis showed that incorporating Cu species on the TiO2 thin film decreases the e--h+ recombination rate. The photocatalytic activity of the nanostructured thin films is 298 µmol g−1 h−1 which is comparable to the reports described in the literature. Additionally, the thin films have simple and reproducible manufacturing, are easy to handle, are reusable and cost-effective. All these facts, make them a significantly more efficient technology than the counterpart powder materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pd Catalysts Based on C3N4-Modified Activated Carbon Derived from Biomass Residues for the Dehydrogenation of Formic Acid

  • Bernal-Vela, María
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Bernal-Vela, María|||/items/bc8b62c6-4a07-42d8-bb19-9badbde5f5aa
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Formic acid has recently been considered one of the most promising liquid organic hydrogen carriers (LOHCs). Its decomposition to obtain H2 has been fruitfully investigated during recent years using catalysts of a very diverse nature. Most of these catalysts lack stability, so finding stable materials under reaction conditions is highly desirable but challenging. In the present study, catalysts based on Pd nanoparticles supported on C3N4-modified activated carbon derived from biomass residues were developed, characterized, and assessed in the decomposition of formic acid in the liquid phase. These catalysts were prepared using a straightforward method that allowed different nitrogen contents to be achieved in the support and avoided the ex situ reduction in the Pd precursor. The results of the catalytic tests indicated the positive role of incorporating C3N4, leading to catalysts that displayed much better performance than the C3N4-free counterpart. The incorporation of C3N4 resulted in catalysts with small and well-distributed Pd nanoparticles, leaching resistance and modified electronic properties of the Pd species. As a result, promising catalytic activity was observed in the developed materials. Pd/AC_C3N4(19) attained an initial TOF of 2893 h−1, and it preserved most of its catalytic activity for at least six consecutive reaction cycles, which is a remarkable characteristic of the developed catalytic system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Facile hydrothermal synthesis and photocatalytic properties of g-C3N4/Cu3TeO6 heterostructures

  • Fernández-Catalá, Javier
  • Chávez-Caiza, Jonny
  • Greco, Rossella
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Cao, Wei
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chávez-Caiza, Jonny|||/items/9bae10f8-0899-4355-9c51-7f655c12ef6c
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In this work, we have developed, for the first time, heterostructures based on Cu3TeO6 (CTO) with a strong interaction with a well-studied g-C3N4 (GCN) semiconductor. This has been carried out to mitigate the drawbacks of CTO for its application as photocatalyst in H2 production. In this sense, the resulting heterostructure presented higher activity than the pure CTO and GCN (113, 85, and 42 µmolH2/mg, respectively). The methodology employed to synthesise the heterostructure was a hydrothermal synthesis on the surface of GCN to ensure a strong interaction between both materials by growing the CTO crystal in presence of GCN. The physicochemical characterisation of the materials by XRD TG, SEM, TEM, and FTIR revealed that the synthesis was successfully developed and that Cu3TeO6 grew on the g-C3N4 surface. Indeed, this novel synthesis of the heterostructure based on CTO has huge interest for its application in H2 production due to the redox capability of the materials, observed by UPS and UV–Vis spectroscopies. The enhancement of the catalytic activity of the heterostructure with respect to the pristine materials was associate to the strong interaction between both components, the catalytic effect of Cu species, and the improved charge transfer. Indeed, a lower e− − h+ pair recombination rate was observed by steady PL analysis with respect to the pristine GCN material. These results indicate that it is possible to synthesise heterostructures based on metal tellurates with improved catalytic activity of the mixture with respect to the pristine material in a relevant energy application such as H2 production.