Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-scale procedure for the mechanical analysis of composite laminate structures considering mixed boundary conditions

  • Turon Pujol, Francesc|||0000-0001-6201-3956
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Martínez García, Javier|||0000-0001-9178-088X
This paper presents a multi-scale procedure for the study of flat composite structures with discontinuities. In this procedure, the structure is solved using shell elements while the laminate performance and the structural discontinuities (e.g. connections or change in the laminate thickness) are analysed with a subscale model made with solid 3D elements. The kinematics of both models are coupled following the Kirchhoff–Love theory. This coupling is used during the homogenization procedure where the characteristic behavior of the different micro-models is obtained. Periodical boundary conditions are used for the laminates whereas a combination between periodical and linear boundary conditions are used for the discontinuities. The proposed procedure allows to reproduce accurately the structure elastic behaviour, as well as the stress and strain states in regions with discontinuities, which until now could only be accurately simulated by means of expensive numerical models using volumetric solid elements., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement № 101006860 (FIBRE4YARDS project) and under grant agreement № 952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed jointly with the European Union . These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Formulation of a new shell-like reduced order model finite element for layered structures

  • Turon Pujol, Francesc|||0000-0001-6201-3956
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Martínez Farré, Francesc Xavier
This paper presents a weak work-based kinematic coupling formulation between layered Reissner-Mindlin (RM) shell models and non-overlapping contiguous solid models. This approach relies on the interface definition proposed by the Mixing Dimensional Coupling (MDC) method, extending it to layered cross-sections. To achieve this, additional weak kinematic conditions are added to the work and reaction equilibrium in order to ensure deformation compatibility along the coupling interface and through the laminate in its thickness direction. The first outcome of the presented work is the development of efficient hybrid models, which employ conventional shell elements in regions with uniform lamination and solid models in areas with discontinuities. This enables accurate capture of the structural stiffness while focusing computational resources on regions where the kinematic assumptions of shell elements are insufficient. Secondly, this work introduces a procedure for defining multi-nodal Shell-Like Reduced Order Models (SLROMs) that are compatible with conventional Reissner Mindlin shell elements. These SLROMs are derived from solid model representations of regions with laminates or discontinuities, such as holes, thickness variations, or laminate transitions. Once analyzed, they enable efficient shell-only analyses while still providing detailed solid model stress distribution. Both the coupling formulation and the SLROM approach are evaluated through illustrative numerical examples., This research has been supported by the European Union’s Horizon 2020 programs under grant agreements No. 101006860 (FIBRE4YARDS project) and No. 952966 (FIBREGY project), and by the TOMAT project (PID2023-153213NA-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Furthermore, it has been carried out within the framework of an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed by the European Union. The authors appreciate these supports., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

bROM: An extension of beam theory through model order reduction

  • Rubio Serrano, Raúl|||0000-0002-1317-8153
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Martínez García, Javier|||0000-0001-9178-088X
Beam analysis played a crucial role in the design of structures throughout modern history. Classical beam theories rely on analytical derivations under certain a priori kinematic assumptions (and are accurate with low computational cost), but they are not amenable to, for example, orthotropic materials and arbitrary cross sections. On the other hand, full 3D linear elasticity theory solved via the Finite Element (FE) method provides solutions for a wide range of engineering problems at the expense of a high computational cost. Reduced-order models try to provide a theory as general as 3D linear elasticity but as efficient as classical beam theories by assuming the solution to be represented in a low-dimensional basis. Among the several options available in the literature, the domain decomposition and hyperreduction via Empirical Cubature Method (ECM), which we name ddROM [1], exhibits this compelling feature. However, ddROM applied to beam structures, may provide more Degrees of Freedom (DoF) per node than most standard commercial FE codes which only consider rigid body motion of the cross section. This paper presents a methodology, called beam Reduced Order Model (bROM), to integrate ddROM in standard FE codes by means of a condensation process followed by a regression procedure. Condensation gives the stiffness matrix, required by FE commercial codes, of a super-element of a given length. This is achieved by assembling several elements and finding the relationship between applied displacements and reactions (Lagrange multipliers). The condensation process is then used to create a database of stiffness matrices as a function of the beam length over which a regression is performed. Some numerical examples are first presented to validate the proposed methodology against the classical beam theory for the case of isotropic beams, and finally, two orthotropic beam showing the utility of the method in comparison with FE.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A new computational method for the assessment of the passive fire protection applied to a composite containership

  • Pacheco Blázquez, Rafael|||0000-0002-3837-2972
  • Capua, Daniel di|||0000-0003-1201-8462
  • García Espinosa, Julio|||0000-0003-0160-7333
  • Casals, Ovidi
  • Hakkarainen, Tuula
  • Tissari, Alexandra
  • Korkealaakso, Antti
The current paradigm in ship design is focused in producing ships that are more environmental friendly. Lightweight or advanced materials are the perfect candidate to make ship transportation more efficient, however the current state-of-the-art is in demand of novel techniques that aid in the design of marine composite structures when exposed to fire. This paper aims to describe a technique that couples a fire dynamic simulator with a thermo-mechanical tool specialised in the calculus of laminated FRP structures, the application can be extended to other areas of engineering as well. An application of the technique is illustrated in the analysis of one of the decks of the superstructure of a Panamax containership where a fire has ignited and the active fire protection system is disabled. A second objective addressed in this paper is the discussion of the misconception that composites, although outperforming steel in several mechanical aspects, show a substantial lower thermo-mechanical performance. The research conducted here shows that composite are advantageous from the thermal point of view, and certainly have benefits in their thermo-structural response, specially when the life of human beings is under consideration.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Methodology and application to assess thermo-mechanical buckling in composite marine structures

  • Pacheco Blázquez, Rafael|||0000-0002-3837-2972
  • Capua, Daniel di|||0000-0003-1201-8462
  • García Espinosa, Julio|||0000-0003-0160-7333
  • Casals, Ovidi
This paper describes the research performed within the scope of H2020 project FIBRE4YARD in the development of a suitable thermo-mechanical framework to analyse composite structures under fire loads. The thermo-mechanical model uses the adiabatic temperature to obtain the through-thickness distribution of temperature of the triangular shell element, this formulation is able to predict phenomena such as pyrolysis, thermo-mechanical yielding and large displacements (non-linear buckling). An application case of a load-bearing section of a container ship is shown to demonstrate the correctness of the methodology, two type of materials are considered in the analysis, traditional materials such steel and advanced materials like fibre reinforced plastic (FRP) composites.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of composite beams using reduced order modeling

  • Rubio Serrano, Raúl|||0000-0002-1317-8153
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Martínez García, Javier|||0000-0001-9178-088X
Beam-like components help to provide structural integrity in a wide range of applications. Initially made of alloys or natural materials such as wood, today’s technologies like pultrusion make possible the manufacturing of such components with composite materials providing good quality products with high performance to weight ratio. The anisotropic nature of composite materials, though, poses a challenging framework when numerically simulating them. This work presents the integration in standard Finite Element (FE) packages of a machine learning methodology that naturally captures the behaviour of composite materials: the multiscale method for periodic structures using domain decomposition and ECM-hyper reduction. The method provides a special type of finite element that can be assembled using FE libraries. However, the kinematics of this element may be described by more Degrees of Freedom (DoF) per node than most standard FE packages consider, hence implementing it is a non-trivial task. The strategy presented here tries to tackle the limitation by means of static condensation followed by a regression procedure. Periodic boundary conditions are employed for the extra DoFs while the regression consists in a polynomial on the logarithmic space. This paper focuses on the performance of the integrated beam element through the analysis of a pultruded omega profile whose anisotropy requires the use of complex models to accurately capture its mechanical behaviour. The agreement between the results obtained with the proposed model and those given by more complex formulations validates the methodology and enables its use in regular FE codes to characterize complex composite beam structures
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High fidelity hydroelastic analysis using modal matrix reduction

  • García-Espinosa, Julio
  • Servan-Camas, Borja
  • Calpe-Linares, Miguel
Structural assessment is a main concern when designing and operating any sort of offshore structure. This assessment is meant to ensure that the structural integrity is preserved along the lifespan of the asset, withstanding the worst sea-states that will be encountered and making sure that the accumulated fatigue damage will not jeopardize its structural integrity neither. The purpose of this paper is to present a fast and reliable hydroelastic model. This model is based on time-domain tight-coupling of a three-dimensional FEM (finite element method) linear structural model and a three-dimensional FEM seakeeping hydrodynamics model. In order to reduce the computational cost of structural dynamic simulations, the high-fidelity structural solution is projected onto the modal basis to obtain the modal matrix system and to extend the response amplitude operators (RAO) to the modal responses (MRAO). From there, the number of structural degrees of freedom can be greatly reduced by retaining only those eigenmodes preserving most of the structural elastic energy. The use MRAOs and/or the large reduction in structural degrees of freedom allows us to: first, quickly analyse the large number of loadcases required on the design stage; and second, to implement a digital twin for structural health monitoring in operational conditions. The paper also presents an application case of the developed methodology., This research was funded by the European Commission under grant agreements H2020 FibreGy (ref. 952966) and H2020 Fibre4Yards (ref. 101006860), and by the Spanish “Ministerio de Ciencia e Innovacion” under grant agreement MLAMAR (ref. PID2021-126561OB-C31)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Composite materials, technologies and manufacturing: current scenario of European Union shipyards

  • Dolz Ripollés, Maria Montserrat|||0000-0001-8794-3332
  • Martínez García, Javier|||0000-0001-9178-088X
  • Sa López, Daniel
  • Silva, João
  • Jurado, Alfonso
This paper provides the results and the analysis of a study conducted on the processes and technologies currently used by European Union shipyards, and their potential interest in new advanced composite construction technologies, including Adaptive Moulds, Automated Tape Laying, Automated Fibre Placement, Curved Pultruded Profiles, Additive Manufacturing, Hot Stamping, Modular and Serialised Shipbuilding and Digitisation of Production. A new set of indexes are also introduced with the objective of facilitating the evaluation of the technological level of the shipyard, thereby allowing the understanding of the shipyard's interest in new developments. The analysis of the survey conducted shows that almost the 95% of shipyards either currently use or plan to use composite materials, being the composites made of fibreglass and polyester resin the most used. These composites are mainly manufactured by manual lamination and vacuum infusion techniques. The survey has also shown that there is a high interest in the shipyard digitisation and the use of new technologies in the shipbuilding industry, especially for new construction shipyards. The study shows that despite shipyards want to adopt digitisation in engineering and design processes, implementation of new technologies and concepts is being held back by financial cost and uncertainty regarding outcomes such as improved operational efficiency of vessels. The shipyards that do not use composites are less technologically advanced than those that use them, according to the analysis of the technological indexes. This analysis has also shown that the shipyards with a high technological index have a more varied potential market offer., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no 101006860, this support is gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon, Francesc
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Martínez García, Javier|||0000-0001-9178-088X
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N.101006860 (FIBRE4YARDS project) and under grant agreement N.952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya, Spain and co-financed jointly with the European Union. These supports are gratefully acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of composite beams using reduced order modeling

  • Rubio Serrano, Raúl
  • Ferrer Ferré, Àlex
  • Hernández Ortega, Joaquín Alberto
  • Martínez García, Javier
Beam-like components help to provide structural integrity in a wide range of applications. Initially made of alloys or natural materials such as wood, today’s technologies like pultrusion make possible the manufacturing of such components with composite materials providing good quality products with high performance to weight ratio. The anisotropic nature of composite materials, though, poses a challenging framework when numerically simulating them. This work presents the integration in standard Finite Element (FE) packages of a machine learning methodology that naturally captures the behaviour of composite materials: the multiscale method for periodic structures using domain decomposition and ECM-hyper reduction. The method provides a special type of finite element that can be assembled using FE libraries. However, the kinematics of this element may be described by more Degrees of Freedom (DoF) per node than most standard FE packages consider, hence implementing it is a non-trivial task. The strategy presented here tries to tackle the limitation by means of static condensation followed by a regression procedure. Periodic boundary conditions are employed for the extra DoFs while the regression consists in a polynomial on the logarithmic space. This paper focuses on the performance of the integrated beam element through the analysis of a pultruded omega profile whose anisotropy requires the use of complex models to accurately capture its mechanical behaviour. The agreement between the results obtained with the proposed model and those given by more complex formulations validates the methodology and enables its use in regular FE codes to characterize complex composite beam structures, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A new computational method for the assessment of the passive fire protection applied to a composite containership

  • Pacheco Blázquez, Rafael
  • Capua, Daniel di
  • García Espinosa, Julio
  • Casals, Ovidi
  • Hakkarainen, Tuula
  • Tissari, Alexandra
  • Korkealaakso, Antti
The current paradigm in ship design is focused in producing ships that are more environmental friendly. Lightweight or advanced materials are the perfect candidate to make ship transportation more efficient, however the current state-of-the-art is in demand of novel techniques that aid in the design of marine composite structures when exposed to fire. This paper aims to describe a technique that couples a fire dynamic simulator with a thermo-mechanical tool specialised in the calculus of laminated FRP structures, the application can be extended to other areas of engineering as well. An application of the technique is illustrated in the analysis of one of the decks of the superstructure of a Panamax containership where a fire has ignited and the active fire protection system is disabled. A second objective addressed in this paper is the discussion of the misconception that composites, although outperforming steel in several mechanical aspects, show a substantial lower thermo-mechanical performance. The research conducted here shows that composite are advantageous from the thermal point of view, and certainly have benefits in their thermo-structural response, specially when the life of human beings is under consideration., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

bROM: An extension of beam theory through model order reduction

  • Rubio Serrano, Raúl
  • Ferrer Ferré, Àlex
  • Hernández Ortega, Joaquín Alberto
  • Martínez García, Javier
Beam analysis played a crucial role in the design of structures throughout modern history. Classical beam theories rely on analytical derivations under certain a priori kinematic assumptions (and are accurate with low computational cost), but they are not amenable to, for example, orthotropic materials and arbitrary cross sections. On the other hand, full 3D linear elasticity theory solved via the Finite Element (FE) method provides solutions for a wide range of engineering problems at the expense of a high computational cost. Reduced-order models try to provide a theory as general as 3D linear elasticity but as efficient as classical beam theories by assuming the solution to be represented in a low-dimensional basis. Among the several options available in the literature, the domain decomposition and hyperreduction via Empirical Cubature Method (ECM), which we name ddROM [1], exhibits this compelling feature. However, ddROM applied to beam structures, may provide more Degrees of Freedom (DoF) per node than most standard commercial FE codes which only consider rigid body motion of the cross section. This paper presents a methodology, called beam Reduced Order Model (bROM), to integrate ddROM in standard FE codes by means of a condensation process followed by a regression procedure. Condensation gives the stiffness matrix, required by FE commercial codes, of a super-element of a given length. This is achieved by assembling several elements and finding the relationship between applied displacements and reactions (Lagrange multipliers). The condensation process is then used to create a database of stiffness matrices as a function of the beam length over which a regression is performed. Some numerical examples are first presented to validate the proposed methodology against the classical beam theory for the case of isotropic beams, and finally, two orthotropic beam showing the utility of the method in comparison with FE., Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formulation of a new shell-like reduced order model finite element for layered structures

  • Turon Pujol, Francesc
  • Otero Gruer, Fermín Enrique
  • Ferrer Ferré, Àlex
  • Martínez Farré, Francesc Xavier
This paper presents a weak work-based kinematic coupling formulation between layered Reissner-Mindlin (RM) shell models and non-overlapping contiguous solid models. This approach relies on the interface definition proposed by the Mixing Dimensional Coupling (MDC) method, extending it to layered cross-sections. To achieve this, additional weak kinematic conditions are added to the work and reaction equilibrium in order to ensure deformation compatibility along the coupling interface and through the laminate in its thickness direction. The first outcome of the presented work is the development of efficient hybrid models, which employ conventional shell elements in regions with uniform lamination and solid models in areas with discontinuities. This enables accurate capture of the structural stiffness while focusing computational resources on regions where the kinematic assumptions of shell elements are insufficient. Secondly, this work introduces a procedure for defining multi-nodal Shell-Like Reduced Order Models (SLROMs) that are compatible with conventional Reissner Mindlin shell elements. These SLROMs are derived from solid model representations of regions with laminates or discontinuities, such as holes, thickness variations, or laminate transitions. Once analyzed, they enable efficient shell-only analyses while still providing detailed solid model stress distribution. Both the coupling formulation and the SLROM approach are evaluated through illustrative numerical examples., This research has been supported by the European Union’s Horizon 2020 programs under grant agreements No. 101006860 (FIBRE4YARDS project) and No. 952966 (FIBREGY project), and by the TOMAT project (PID2023-153213NA-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Furthermore, it has been carried out within the framework of an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed by the European Union. The authors appreciate these supports., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon, Francesc
  • Otero Gruer, Fermín Enrique
  • Martínez García, Javier
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N.101006860 (FIBRE4YARDS project) and under grant agreement N.952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya, Spain and co-financed jointly with the European Union. These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Composite materials, technologies and manufacturing: current scenario of European Union shipyards

  • Dolz Ripollés, Maria Montserrat
  • Martínez García, Javier
  • Sa López, Daniel
  • Silva, João
  • Jurado, Alfonso
This paper provides the results and the analysis of a study conducted on the processes and technologies currently used by European Union shipyards, and their potential interest in new advanced composite construction technologies, including Adaptive Moulds, Automated Tape Laying, Automated Fibre Placement, Curved Pultruded Profiles, Additive Manufacturing, Hot Stamping, Modular and Serialised Shipbuilding and Digitisation of Production. A new set of indexes are also introduced with the objective of facilitating the evaluation of the technological level of the shipyard, thereby allowing the understanding of the shipyard's interest in new developments. The analysis of the survey conducted shows that almost the 95% of shipyards either currently use or plan to use composite materials, being the composites made of fibreglass and polyester resin the most used. These composites are mainly manufactured by manual lamination and vacuum infusion techniques. The survey has also shown that there is a high interest in the shipyard digitisation and the use of new technologies in the shipbuilding industry, especially for new construction shipyards. The study shows that despite shipyards want to adopt digitisation in engineering and design processes, implementation of new technologies and concepts is being held back by financial cost and uncertainty regarding outcomes such as improved operational efficiency of vessels. The shipyards that do not use composites are less technologically advanced than those that use them, according to the analysis of the technological indexes. This analysis has also shown that the shipyards with a high technological index have a more varied potential market offer., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no 101006860, this support is gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High fidelity hydroelastic analysis using modal matrix reduction

  • García-Espinosa, Julio
  • Servan-Camas, Borja
  • Calpe-Linares, Miguel
Structural assessment is a main concern when designing and operating any sort of offshore structure. This assessment is meant to ensure that the structural integrity is preserved along the lifespan of the asset, withstanding the worst sea-states that will be encountered and making sure that the accumulated fatigue damage will not jeopardize its structural integrity neither. The purpose of this paper is to present a fast and reliable hydroelastic model. This model is based on time-domain tight-coupling of a three-dimensional FEM (finite element method) linear structural model and a three-dimensional FEM seakeeping hydrodynamics model. In order to reduce the computational cost of structural dynamic simulations, the high-fidelity structural solution is projected onto the modal basis to obtain the modal matrix system and to extend the response amplitude operators (RAO) to the modal responses (MRAO). From there, the number of structural degrees of freedom can be greatly reduced by retaining only those eigenmodes preserving most of the structural elastic energy. The use MRAOs and/or the large reduction in structural degrees of freedom allows us to: first, quickly analyse the large number of loadcases required on the design stage; and second, to implement a digital twin for structural health monitoring in operational conditions. The paper also presents an application case of the developed methodology., This research was funded by the European Commission under grant agreements H2020 FibreGy (ref. 952966) and H2020 Fibre4Yards (ref. 101006860), and by the Spanish “Ministerio de Ciencia e Innovacion” under grant agreement MLAMAR (ref. PID2021-126561OB-C31)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Methodology and application to assess thermo-mechanical buckling in composite marine structures

  • Pacheco Blázquez, Rafael
  • Capua, Daniel di
  • García Espinosa, Julio
  • Casals, Ovidi
This paper describes the research performed within the scope of H2020 project FIBRE4YARD in the development of a suitable thermo-mechanical framework to analyse composite structures under fire loads. The thermo-mechanical model uses the adiabatic temperature to obtain the through-thickness distribution of temperature of the triangular shell element, this formulation is able to predict phenomena such as pyrolysis, thermo-mechanical yielding and large displacements (non-linear buckling). An application case of a load-bearing section of a container ship is shown to demonstrate the correctness of the methodology, two type of materials are considered in the analysis, traditional materials such steel and advanced materials like fibre reinforced plastic (FRP) composites., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-scale procedure for the mechanical analysis of composite laminate structures considering mixed boundary conditions

  • Turon Pujol, Francesc
  • Otero Gruer, Fermín Enrique
  • Martínez García, Javier
This paper presents a multi-scale procedure for the study of flat composite structures with discontinuities. In this procedure, the structure is solved using shell elements while the laminate performance and the structural discontinuities (e.g. connections or change in the laminate thickness) are analysed with a subscale model made with solid 3D elements. The kinematics of both models are coupled following the Kirchhoff–Love theory. This coupling is used during the homogenization procedure where the characteristic behavior of the different micro-models is obtained. Periodical boundary conditions are used for the laminates whereas a combination between periodical and linear boundary conditions are used for the discontinuities. The proposed procedure allows to reproduce accurately the structure elastic behaviour, as well as the stress and strain states in regions with discontinuities, which until now could only be accurately simulated by means of expensive numerical models using volumetric solid elements., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement № 101006860 (FIBRE4YARDS project) and under grant agreement № 952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed jointly with the European Union . These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Numerical Framework for the Coupled Analysis of Floating Offshore Multi-Wind Turbines

  • Berdugo Parada, Irene|||0009-0002-5890-3651
  • Serván Camas, Borja|||0000-0003-3266-949X
  • García Espinosa, Julio|||0000-0003-0160-7333
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

High Fidelity Hydroelastic Analysis Using Modal Matrix Reduction

  • García Espinosa, Julio|||0000-0003-0160-7333
  • Serván Camas, Borja|||0000-0003-3266-949X
  • Calpe Linares, Miguel|||0000-0003-4500-3507
Archivo Digital UPM
Publicación Tesis doctoral (DoctoralThesis)

Numerical tools for the assessment of offshore wind platforms

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

A Digital Twin for Assessing the Remaining Useful Life of Offshore Wind Turbine Structures

  • Pacheco Blazquez, Rafael, Rafael|||0000-0002-3837-2972
  • Garcia Espinosa, Julio|||0000-0003-0160-7333
  • Di Capua, Daniel|||0000-0003-1201-8462
  • Pastor Sánchez, Andrés|||0009-0002-8683-565X
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Modal matrix reduction for fully coupled integrated load analysis of floating structures / REVISAR SEGUNDO CODIGO H2020

  • Serván Camas, Borja|||0000-0003-3266-949X
  • Berdugo Parada, Irene|||0009-0002-5890-3651
  • García Espinosa, Julio|||0000-0003-0160-7333
  • Pastor Sánchez, Andrés|||0009-0002-8683-565X