Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon Pujol, Francesc|||0000-0001-6201-3956
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Martínez García, Javier|||0000-0001-9178-088X
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-scale procedure for the mechanical analysis of composite laminate structures considering mixed boundary conditions

  • Turon Pujol, Francesc|||0000-0001-6201-3956
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Martínez García, Javier|||0000-0001-9178-088X
This paper presents a multi-scale procedure for the study of flat composite structures with discontinuities. In this procedure, the structure is solved using shell elements while the laminate performance and the structural discontinuities (e.g. connections or change in the laminate thickness) are analysed with a subscale model made with solid 3D elements. The kinematics of both models are coupled following the Kirchhoff–Love theory. This coupling is used during the homogenization procedure where the characteristic behavior of the different micro-models is obtained. Periodical boundary conditions are used for the laminates whereas a combination between periodical and linear boundary conditions are used for the discontinuities. The proposed procedure allows to reproduce accurately the structure elastic behaviour, as well as the stress and strain states in regions with discontinuities, which until now could only be accurately simulated by means of expensive numerical models using volumetric solid elements., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement № 101006860 (FIBRE4YARDS project) and under grant agreement № 952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed jointly with the European Union . These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Formulation of a new shell-like reduced order model finite element for layered structures

  • Turon Pujol, Francesc|||0000-0001-6201-3956
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Martínez Farré, Francesc Xavier
This paper presents a weak work-based kinematic coupling formulation between layered Reissner-Mindlin (RM) shell models and non-overlapping contiguous solid models. This approach relies on the interface definition proposed by the Mixing Dimensional Coupling (MDC) method, extending it to layered cross-sections. To achieve this, additional weak kinematic conditions are added to the work and reaction equilibrium in order to ensure deformation compatibility along the coupling interface and through the laminate in its thickness direction. The first outcome of the presented work is the development of efficient hybrid models, which employ conventional shell elements in regions with uniform lamination and solid models in areas with discontinuities. This enables accurate capture of the structural stiffness while focusing computational resources on regions where the kinematic assumptions of shell elements are insufficient. Secondly, this work introduces a procedure for defining multi-nodal Shell-Like Reduced Order Models (SLROMs) that are compatible with conventional Reissner Mindlin shell elements. These SLROMs are derived from solid model representations of regions with laminates or discontinuities, such as holes, thickness variations, or laminate transitions. Once analyzed, they enable efficient shell-only analyses while still providing detailed solid model stress distribution. Both the coupling formulation and the SLROM approach are evaluated through illustrative numerical examples., This research has been supported by the European Union’s Horizon 2020 programs under grant agreements No. 101006860 (FIBRE4YARDS project) and No. 952966 (FIBREGY project), and by the TOMAT project (PID2023-153213NA-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Furthermore, it has been carried out within the framework of an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed by the European Union. The authors appreciate these supports., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High fidelity hydroelastic analysis using modal matrix reduction

  • García-Espinosa, Julio
  • Servan-Camas, Borja
  • Calpe-Linares, Miguel
Structural assessment is a main concern when designing and operating any sort of offshore structure. This assessment is meant to ensure that the structural integrity is preserved along the lifespan of the asset, withstanding the worst sea-states that will be encountered and making sure that the accumulated fatigue damage will not jeopardize its structural integrity neither. The purpose of this paper is to present a fast and reliable hydroelastic model. This model is based on time-domain tight-coupling of a three-dimensional FEM (finite element method) linear structural model and a three-dimensional FEM seakeeping hydrodynamics model. In order to reduce the computational cost of structural dynamic simulations, the high-fidelity structural solution is projected onto the modal basis to obtain the modal matrix system and to extend the response amplitude operators (RAO) to the modal responses (MRAO). From there, the number of structural degrees of freedom can be greatly reduced by retaining only those eigenmodes preserving most of the structural elastic energy. The use MRAOs and/or the large reduction in structural degrees of freedom allows us to: first, quickly analyse the large number of loadcases required on the design stage; and second, to implement a digital twin for structural health monitoring in operational conditions. The paper also presents an application case of the developed methodology., This research was funded by the European Commission under grant agreements H2020 FibreGy (ref. 952966) and H2020 Fibre4Yards (ref. 101006860), and by the Spanish “Ministerio de Ciencia e Innovacion” under grant agreement MLAMAR (ref. PID2021-126561OB-C31)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multiscale modeling of prismatic heterogeneous structures based on a localized hyperreduced-order method

  • Giuliodori Picco, Agustina|||0000-0002-8550-6953
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Soudah Prieto, Eduardo|||0000-0002-2301-4718
This work aims at deriving special types of one-dimensional Finite Elements (1D FE) for efficiently modeling heterogeneous prismatic structures, in the small strains regime, by means of reduced-order modeling (ROM) and domain decomposition techniques. The employed partitioning framework introduces “fictitious” interfaces between contiguous subdomains, leading to a formulation with both subdomain and interface fields. We propose a low-dimensional parameterization at both subdomain and interface levels by using reduced-order bases precomputed in an offline stage by applying the Singular Value Decomposition (SVD) on solution snapshots. In this parameterization, the amplitude of the fictitious interfaces play the role of coarse-scale displacement unknowns. We demonstrate that, with this partitioned framework, it is possible to arrive at a solution strategy that avoids solving the typical nested local/global problem of other similar methods (such as the FE method). Rather, in our approach, the coarse-grid cells can be regarded as special types of finite elements, whose nodes coincides with the centroids of the interfaces, and whose kinematics are dictated by the modes of the “fictitious” interfaces. This means that the kinematics of our coarse-scale FE are not pre-defined by the user, but extracted from the set of “training” computational experiments. Likewise, we demonstrate that the coarse-scale and fine-scale displacements are related by inter-scale operators that can be precomputed in the offline stage. Lastly, a hyperreduced scheme is considered for the evaluation of the internal forces, allowing us to deal with possible material nonlinearities., This work has received support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S)”. A. Giuliodori also gratefully acknowledges the support of “Secretaria d’Universitats i Recerca de la Generalitat de Catalunya i del Fons Social Europeu” through the FI grant (00939/2020), and J.A. Hernández the support of, on the one hand, the European High-Performance Computing Joint Undertaking (JU) under grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation program and from Spain, Germany, France, Italy, Poland, Switzerland, Norway), and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 952966 (project FIBREGY)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon, Francesc
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Martínez García, Javier|||0000-0001-9178-088X
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N.101006860 (FIBRE4YARDS project) and under grant agreement N.952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya, Spain and co-financed jointly with the European Union. These supports are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models

  • Bravo Martínez, José Raúl|||0000-0002-4465-7536
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Ares de Parga Regalado, Sebastian|||0000-0001-5709-4683
  • Rossi, Riccardo|||0000-0003-0528-7074
This is the peer reviewed version of the following article: Bravo JR, Hernández JA, Ares de Parga S, Rossi R. A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models. Int J Numer Methods Eng. 2024;e7590. doi: 10.1002/nme.7590, which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/nme.7590. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., This article is concerned with quadrature/cubature rules able to deal with multiple subspaces of functions, in such a way that the integration points are common for all the subspaces, yet the (nonnegative) weights are tailored to each specific subspace. These subspace-adaptive weights cubature rules can be used to accelerate computational mechanics applications requiring efficiently evaluating spatial integrals whose integrand function dynamically switches between multiple pre-computed subspaces. One of such applications is local hyperreduced-order modeling (HROM), in which the solution manifold is approximately represented as a collection of basis matrices, each basis matrix corresponding to a different region in parameter space. The proposed optimization framework is discrete in terms of the location of the integration points, in the sense that such points are selected among the Gauss points of a given finite element mesh, and the target subspaces of functions are represented by orthogonal basis matrices constructed from the values of the functions at such Gauss points, using the singular value decomposition (SVD). This discrete framework allows us to treat also problems in which the integrals are approximated as a weighted sum of the contribution of each finite element, as in the energy-conserving sampling and weighting method of C. Farhat and co-workers. Two distinct solution strategies are examined. The first one is a greedy strategy based on an enhanced version of the empirical cubature method (ECM) developed by the authors elsewhere (we call it the subspace-adaptive weights ECM, SAW-ECM for short), while the second method is based on a convexification of the cubature problem so that it can be addressed by linear programming algorithms. We show in a toy problem involving integration of polynomial functions that the SAW-ECM clearly outperforms the other method both in terms of computational cost and optimality. On the other hand, we illustrate the performance of the SAW-ECM in the construction of a local HROMs in a highly nonlinear equilibrium problem (large strains regime). We demonstrate that, provided that the subspace-transition errors are negligible, the error associated to hyperreduction using adaptive weights can be controlled by the truncation tolerances of the SVDs used for determining the basis matrices. We also show that the number of integration points decreases notably as the number of subspaces increases, and that, in the limiting case of using as many subspaces as snapshots, the SAW-ECM delivers rules with a number of integration points only dependent on the intrinsic dimensionality of the solution manifold and the degree of overlapping required to avoid subspace-transition errors. The Python source codes of the proposed SAW-ECM are openly accessible in the public repository https://github.com/Rbravo555/localECM., The authors acknowledge the support of the European High-Performance Computing Joint Undertaking (JU) under Grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway), as well as the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” J. A. Hernández expresses gratitude by the support of, on the one hand, the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00), and, on the other hand, the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 952966 (project FIBREGY). Lastly, both J. R. Bravo and S. Ares de Parga acknowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for the financial support through doctoral Grants FI-SDUR 2020 and FI SDUR-2021, respectively., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon Pujol, Francesc
  • Otero Gruer, Fermín Enrique
  • Martínez García, Javier
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multiscale modeling of prismatic heterogeneous structures based on a localized hyperreduced-order method

  • Giuliodori Picco, Agustina
  • Hernández Ortega, Joaquín Alberto
  • Soudah Prieto, Eduardo
This work aims at deriving special types of one-dimensional Finite Elements (1D FE) for efficiently modeling heterogeneous prismatic structures, in the small strains regime, by means of reduced-order modeling (ROM) and domain decomposition techniques. The employed partitioning framework introduces “fictitious” interfaces between contiguous subdomains, leading to a formulation with both subdomain and interface fields. We propose a low-dimensional parameterization at both subdomain and interface levels by using reduced-order bases precomputed in an offline stage by applying the Singular Value Decomposition (SVD) on solution snapshots. In this parameterization, the amplitude of the fictitious interfaces play the role of coarse-scale displacement unknowns. We demonstrate that, with this partitioned framework, it is possible to arrive at a solution strategy that avoids solving the typical nested local/global problem of other similar methods (such as the FE method). Rather, in our approach, the coarse-grid cells can be regarded as special types of finite elements, whose nodes coincides with the centroids of the interfaces, and whose kinematics are dictated by the modes of the “fictitious” interfaces. This means that the kinematics of our coarse-scale FE are not pre-defined by the user, but extracted from the set of “training” computational experiments. Likewise, we demonstrate that the coarse-scale and fine-scale displacements are related by inter-scale operators that can be precomputed in the offline stage. Lastly, a hyperreduced scheme is considered for the evaluation of the internal forces, allowing us to deal with possible material nonlinearities., This work has received support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S)”. A. Giuliodori also gratefully acknowledges the support of “Secretaria d’Universitats i Recerca de la Generalitat de Catalunya i del Fons Social Europeu” through the FI grant (00939/2020), and J.A. Hernández the support of, on the one hand, the European High-Performance Computing Joint Undertaking (JU) under grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation program and from Spain, Germany, France, Italy, Poland, Switzerland, Norway), and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 952966 (project FIBREGY)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formulation of a new shell-like reduced order model finite element for layered structures

  • Turon Pujol, Francesc
  • Otero Gruer, Fermín Enrique
  • Ferrer Ferré, Àlex
  • Martínez Farré, Francesc Xavier
This paper presents a weak work-based kinematic coupling formulation between layered Reissner-Mindlin (RM) shell models and non-overlapping contiguous solid models. This approach relies on the interface definition proposed by the Mixing Dimensional Coupling (MDC) method, extending it to layered cross-sections. To achieve this, additional weak kinematic conditions are added to the work and reaction equilibrium in order to ensure deformation compatibility along the coupling interface and through the laminate in its thickness direction. The first outcome of the presented work is the development of efficient hybrid models, which employ conventional shell elements in regions with uniform lamination and solid models in areas with discontinuities. This enables accurate capture of the structural stiffness while focusing computational resources on regions where the kinematic assumptions of shell elements are insufficient. Secondly, this work introduces a procedure for defining multi-nodal Shell-Like Reduced Order Models (SLROMs) that are compatible with conventional Reissner Mindlin shell elements. These SLROMs are derived from solid model representations of regions with laminates or discontinuities, such as holes, thickness variations, or laminate transitions. Once analyzed, they enable efficient shell-only analyses while still providing detailed solid model stress distribution. Both the coupling formulation and the SLROM approach are evaluated through illustrative numerical examples., This research has been supported by the European Union’s Horizon 2020 programs under grant agreements No. 101006860 (FIBRE4YARDS project) and No. 952966 (FIBREGY project), and by the TOMAT project (PID2023-153213NA-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Furthermore, it has been carried out within the framework of an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed by the European Union. The authors appreciate these supports., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams

  • Sorrenti, Matteo
  • Turon, Francesc
  • Otero Gruer, Fermín Enrique
  • Martínez García, Javier
  • Gherlone, Marco
This work presents a new critical overview and a numerical assessment of some advanced Finite Element (FE) approaches for the analysis of multilayered composite and sandwich beams. Firstly, the fundamental hypotheses behind the Timoshenko Beam Theory (TBT) and the Refined Zigzag Theory (RZT) are addressed, and corresponding low-order simple and efficient two-noded beam elements are recalled for 2D cylindrical bending problems. Additionally, two novel advanced FE techniques are employed for 2D bending analysis, i.e. the Multi-Scale (MS) analysis and the Beam-Like Reduced Order Model (BLROM). The proposed FE models are used to investigate the static cylindrical bending response of multilayered composite and sandwich beams under different boundary conditions. The results demonstrate the superior predictive capabilities of the RZT, MS and BLROM models compared to the TBT one. Furthermore, despite having the same kinematics as the TBT, the MS and BLROM models guarantee enhancements in axial strain and transverse shear stress distributions. In addition, the RZT confirms its superior accuracy in predicting both transverse displacements and strains across the laminate thickness. Depending on their accuracy, the RZT, MS and BLROM models are computationally more advantageous than other expensive high-fidelity FE approaches and excellent candidates for the 2D static analysis of multilayered beams., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N.101006860 (FIBRE4YARDS project) and under grant agreement N.952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya, Spain and co-financed jointly with the European Union. These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High fidelity hydroelastic analysis using modal matrix reduction

  • García-Espinosa, Julio
  • Servan-Camas, Borja
  • Calpe-Linares, Miguel
Structural assessment is a main concern when designing and operating any sort of offshore structure. This assessment is meant to ensure that the structural integrity is preserved along the lifespan of the asset, withstanding the worst sea-states that will be encountered and making sure that the accumulated fatigue damage will not jeopardize its structural integrity neither. The purpose of this paper is to present a fast and reliable hydroelastic model. This model is based on time-domain tight-coupling of a three-dimensional FEM (finite element method) linear structural model and a three-dimensional FEM seakeeping hydrodynamics model. In order to reduce the computational cost of structural dynamic simulations, the high-fidelity structural solution is projected onto the modal basis to obtain the modal matrix system and to extend the response amplitude operators (RAO) to the modal responses (MRAO). From there, the number of structural degrees of freedom can be greatly reduced by retaining only those eigenmodes preserving most of the structural elastic energy. The use MRAOs and/or the large reduction in structural degrees of freedom allows us to: first, quickly analyse the large number of loadcases required on the design stage; and second, to implement a digital twin for structural health monitoring in operational conditions. The paper also presents an application case of the developed methodology., This research was funded by the European Commission under grant agreements H2020 FibreGy (ref. 952966) and H2020 Fibre4Yards (ref. 101006860), and by the Spanish “Ministerio de Ciencia e Innovacion” under grant agreement MLAMAR (ref. PID2021-126561OB-C31)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models

  • Bravo Martínez, José Raúl
  • Hernández Ortega, Joaquín Alberto
  • Ares de Parga Regalado, Sebastian
  • Rossi, Riccardo
This is the peer reviewed version of the following article: Bravo JR, Hernández JA, Ares de Parga S, Rossi R. A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models. Int J Numer Methods Eng. 2024;e7590. doi: 10.1002/nme.7590, which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/nme.7590. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., This article is concerned with quadrature/cubature rules able to deal with multiple subspaces of functions, in such a way that the integration points are common for all the subspaces, yet the (nonnegative) weights are tailored to each specific subspace. These subspace-adaptive weights cubature rules can be used to accelerate computational mechanics applications requiring efficiently evaluating spatial integrals whose integrand function dynamically switches between multiple pre-computed subspaces. One of such applications is local hyperreduced-order modeling (HROM), in which the solution manifold is approximately represented as a collection of basis matrices, each basis matrix corresponding to a different region in parameter space. The proposed optimization framework is discrete in terms of the location of the integration points, in the sense that such points are selected among the Gauss points of a given finite element mesh, and the target subspaces of functions are represented by orthogonal basis matrices constructed from the values of the functions at such Gauss points, using the singular value decomposition (SVD). This discrete framework allows us to treat also problems in which the integrals are approximated as a weighted sum of the contribution of each finite element, as in the energy-conserving sampling and weighting method of C. Farhat and co-workers. Two distinct solution strategies are examined. The first one is a greedy strategy based on an enhanced version of the empirical cubature method (ECM) developed by the authors elsewhere (we call it the subspace-adaptive weights ECM, SAW-ECM for short), while the second method is based on a convexification of the cubature problem so that it can be addressed by linear programming algorithms. We show in a toy problem involving integration of polynomial functions that the SAW-ECM clearly outperforms the other method both in terms of computational cost and optimality. On the other hand, we illustrate the performance of the SAW-ECM in the construction of a local HROMs in a highly nonlinear equilibrium problem (large strains regime). We demonstrate that, provided that the subspace-transition errors are negligible, the error associated to hyperreduction using adaptive weights can be controlled by the truncation tolerances of the SVDs used for determining the basis matrices. We also show that the number of integration points decreases notably as the number of subspaces increases, and that, in the limiting case of using as many subspaces as snapshots, the SAW-ECM delivers rules with a number of integration points only dependent on the intrinsic dimensionality of the solution manifold and the degree of overlapping required to avoid subspace-transition errors. The Python source codes of the proposed SAW-ECM are openly accessible in the public repository https://github.com/Rbravo555/localECM., The authors acknowledge the support of the European High-Performance Computing Joint Undertaking (JU) under Grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway), as well as the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” J. A. Hernández expresses gratitude by the support of, on the one hand, the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00), and, on the other hand, the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 952966 (project FIBREGY). Lastly, both J. R. Bravo and S. Ares de Parga acknowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for the financial support through doctoral Grants FI-SDUR 2020 and FI SDUR-2021, respectively., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-scale procedure for the mechanical analysis of composite laminate structures considering mixed boundary conditions

  • Turon Pujol, Francesc
  • Otero Gruer, Fermín Enrique
  • Martínez García, Javier
This paper presents a multi-scale procedure for the study of flat composite structures with discontinuities. In this procedure, the structure is solved using shell elements while the laminate performance and the structural discontinuities (e.g. connections or change in the laminate thickness) are analysed with a subscale model made with solid 3D elements. The kinematics of both models are coupled following the Kirchhoff–Love theory. This coupling is used during the homogenization procedure where the characteristic behavior of the different micro-models is obtained. Periodical boundary conditions are used for the laminates whereas a combination between periodical and linear boundary conditions are used for the discontinuities. The proposed procedure allows to reproduce accurately the structure elastic behaviour, as well as the stress and strain states in regions with discontinuities, which until now could only be accurately simulated by means of expensive numerical models using volumetric solid elements., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement № 101006860 (FIBRE4YARDS project) and under grant agreement № 952966 (FIBREGY project). In addition, this research work is framed within an FI doctoral grant awarded by the Generalitat de Catalunya and co-financed jointly with the European Union . These supports are gratefully acknowledged., Peer Reviewed, Postprint (published version)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Numerical Framework for the Coupled Analysis of Floating Offshore Multi-Wind Turbines

  • Berdugo Parada, Irene|||0009-0002-5890-3651
  • Serván Camas, Borja|||0000-0003-3266-949X
  • García Espinosa, Julio|||0000-0003-0160-7333
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

High Fidelity Hydroelastic Analysis Using Modal Matrix Reduction

  • García Espinosa, Julio|||0000-0003-0160-7333
  • Serván Camas, Borja|||0000-0003-3266-949X
  • Calpe Linares, Miguel|||0000-0003-4500-3507
Archivo Digital UPM
Publicación Tesis doctoral (DoctoralThesis)

Numerical tools for the assessment of offshore wind platforms

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

A Digital Twin for Assessing the Remaining Useful Life of Offshore Wind Turbine Structures

  • Pacheco Blazquez, Rafael, Rafael|||0000-0002-3837-2972
  • Garcia Espinosa, Julio|||0000-0003-0160-7333
  • Di Capua, Daniel|||0000-0003-1201-8462
  • Pastor Sánchez, Andrés|||0009-0002-8683-565X
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Modal matrix reduction for fully coupled integrated load analysis of floating structures / REVISAR SEGUNDO CODIGO H2020

  • Serván Camas, Borja|||0000-0003-3266-949X
  • Berdugo Parada, Irene|||0009-0002-5890-3651
  • García Espinosa, Julio|||0000-0003-0160-7333
  • Pastor Sánchez, Andrés|||0009-0002-8683-565X