Pasar al contenido principal

MODELOS COMPUTACIONALES PARA LA EVALUACION Y TRATAMIENTO DE DISECCIONES DE AORTA: DISEÑO DE DISPOSITIVOS ENDOVASCULARES

PID2021-122518OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Endovascular repair of aortic dissection with a bioresorbable patch: Computational and experimental study

  • Bracco, Marta Irene
  • Canalejo-Codina, Francesc
  • Giuliodori, Agustina
  • Montanino, Andrea
  • Martorell, Jordi
  • Soudah, Eduardo
This study introduces an experimentally-calibrated finite-element framework to predict the endovascular sealing performance of a bioresorbable patch for aortic dissection repair. The patch–aortic wall interaction was modeled using an adhesion-enabled contact formulation, with parameters derived from a custom dye-penetration test to replicate in-vivo tissue adhesion. A parametric analysis assessed the impact of tear size (10–20 mm), tear morphology (round vs. circumferential ellipse), and deployment angle (5º–20º) on patch sealing efficiency, wall compliance, and local stress distribution under physiological loading. Tear geometry was identified as the dominant determinant of sealing: large round tears reduced effective apposition, while circumferential elliptical tears promoted full wall coupling at lower deployment forces. Increasing deployment angle raised insertion forces and impaired circumferential contact. Importantly, pulsatile hemodynamic loading demonstrated that the patch preserved native wall compliance without inducing adverse stress concentrations. By integrating experimental calibration with computational modeling, this framework offers a quantitative tool to evaluate anatomical and procedural factors influencing endovascular sealing. These insights may support the design optimization and clinical translation of resorbable patch-based strategies for aortic dissection repair., info:eu-repo/semantics/publishedVersion
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Preconditioning iterative solvers via the Empirical Interscale Finite Element Method (EIFEM)

  • Rubio Serrano, Raúl|||0000-0002-1317-8153
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
This work explores the use of the Empirical Interscale Finite Element Method (EIFEM) as a novel preconditioner for iterative solvers in the linear elastic regime. Originally developed as a multiscale Reduced Order Model (ROM), EIFEM captures the kinematics of a unit cell and leverages static condensation with a reduced basis to construct a coarse approximation. We integrate EIFEM as a coarse space within a preconditioned conjugate gradient solver, incorporating pre- and post-smoothing steps. Numerical experiments confirm that EIFEM-based preconditioning significantly reduces iteration counts, particularly for near-solid structures. Although non-solid structures also benefit from reduced iteration counts, the convergence rate is lower compared to solid or nearly-solid cases. This behavior stems from the sensitivity of the solver to the accuracy of the ROM approximation, and we show discontinuous edge functions and discuss other potential strategies as a way to enhance this accuracy. In terms of scalability, the preconditioner is robust, maintaining a nearly constant iteration count as the problem size increases. This work is the first application of EIFEM for preconditioning purposes, demonstrating its potential as a scalable and efficient preconditioner for iterative solvers in 2D and 3D geometries., R.Rubio and A.Ferrer gratefully acknowledge the support of the following projects: ”Optimización topológica con compuestos y materiales flexibles” (PID2023-153213NA-I00), ”Disseny computacionalòptim de bateries amb materials compostos sostenibles per a una mobilitat més eficient” (ACE122/24/000030) and ”Design of flexible materials, structures via shape and topology optimization” (PCI2024-155060-2). J.A. Hernández expresses gratitude by the support of the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Computational model for retinal haemodynamics under gravitational and postural variations

  • Nigro, Michele
  • Montanino, Andrea
  • Soudah Prieto, Eduardo|||0000-0002-2301-4718
Spaceflight-associated neuro-ocular syndrome presents a significant risk during long-duration spaceflight, yet the retinal mechanisms underlying these visual changes remain poorly characterized. We developed a physiologically detailed lumped-parameter model coupling a five-compartment retinal vascular network with a dynamic intraocular pressure module responsive to hydrostatic shifts. Head-down tilt experiments were reproduced to emulate cephalad fluid shifts in microgravity. Model outputs are closely aligned with experimental benchmarks. Intraocular pressure increased from 16.3 mmHg (upright) to 29.5 mmHg at -30° (81% increase), while ocular perfusion pressure remained within 2 mmHg, reflecting haemodynamic responses. Retinal blood-flow predictions fell within the interquartile range of in vivo Doppler measurements, and peak systolic velocity trends in the central retinal artery agreed within 1% of ultrasound data after incorporating a microgravity-induced 4% central retinal artery constriction. These findings validate the model's ability to capture the coupled influence of systemic arterial pressure, venous drainage and intraocular pressure on retinal perfusion across gravitational states. Simulations revealed that posture-induced elevations in arterial pressure and intraocular pressure propagate non-linearly through the retinal tree, imposing the greatest mechanical stress on the central retinal artery and arteriolar segments, critical sites for flow dysregulation and potential optic nerve damage. By integrating retinal and ocular biomechanics, the model developed in this work offers mechanistic insight into the pathogenesis of neuro-ocular syndrome, establishes quantitative thresholds to inform countermeasure development, and provides a transferable tool for terrestrial disorders involving intraocular pressure and vascular dysregulation, such as glaucoma and hypertensive retinopathy., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the support of ‘Proyecto CPP2021-008546 financiado por MCIN/AEI/10.13039/501100011033’ por la Unio´n Europea NextGeneration EU/PRTR’ and ’Proyecto PID2021-122518OBI00 financiado por MCIN/AEI/10.13039/501100011033’ por FEDER Una manera de hacer Europa’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An efficient procedure for the blood flow computer simulation of patient-specific aortic dissections

  • Zorrilla Martínez, Rubén|||0000-0001-8270-7170
  • Soudah Prieto, Eduardo|||0000-0002-2301-4718
In this work we present a novel methodology for the numerical simulation of patient-specific aortic dissections. Our proposal, which targets the seamless virtual prototyping of customized scenarios, combines an innovative two-step segmentation procedure with a CutFEM technique capable of dealing with thin-walled bodies such as the intimal flap. First, we generate the fluid mesh from the outer aortic wall disregarding the intimal flap, similarly to what would be done in a healthy aorta. Second, we create a surface mesh from the approximate midline of the intimal flap. This approach allows us to decouple the segmentation of the fluid volume from that of the intimal flap, thereby bypassing the need to create a volumetric mesh around a thin-walled body, an operation widely known to be complex and error-prone. Once the two meshes are obtained, the original configuration of the dissection into true and false lumen is recovered by embedding the surface mesh into the volumetric one and calculating a level set function that implicitly represents the intimal flap in terms of the volumetric mesh entities. We then leverage the capabilities of unfitted mesh methods, specifically relying on a CutFEM technique tailored for thin-walled bodies, to impose the wall boundary conditions over the embedded intimal flap. We tested the method by simulating the flow in four patient-specific aortic dissections, all involving intricate geometrical patterns. In all cases, the preprocess is greatly simplified with no impact on the computational times. Additionally, the obtained results are consistent with clinical evidence and previous research., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S). Eduardo Soudah acknowledges the support of “Proyecto CPP2021-008546 financiado por MCIN/AEI/10.13039/501100011033 por la Unión Europea NextGenerationEU/ PRTR” and “Proyecto PID2021-122518OB-I00 financiado por MCIN/AEI/ 10.13039/501100011033 por FEDER Una manera de hacer Europa ”. Finally, the authors gratefully thank Aortyx and Mr. Yago Trias for the collaboration in the segmentation of the four patient-specific scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models

  • Bravo Martínez, José Raúl|||0000-0002-4465-7536
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Ares de Parga Regalado, Sebastian|||0000-0001-5709-4683
  • Rossi, Riccardo|||0000-0003-0528-7074
This is the peer reviewed version of the following article: Bravo JR, Hernández JA, Ares de Parga S, Rossi R. A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models. Int J Numer Methods Eng. 2024;e7590. doi: 10.1002/nme.7590, which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/nme.7590. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., This article is concerned with quadrature/cubature rules able to deal with multiple subspaces of functions, in such a way that the integration points are common for all the subspaces, yet the (nonnegative) weights are tailored to each specific subspace. These subspace-adaptive weights cubature rules can be used to accelerate computational mechanics applications requiring efficiently evaluating spatial integrals whose integrand function dynamically switches between multiple pre-computed subspaces. One of such applications is local hyperreduced-order modeling (HROM), in which the solution manifold is approximately represented as a collection of basis matrices, each basis matrix corresponding to a different region in parameter space. The proposed optimization framework is discrete in terms of the location of the integration points, in the sense that such points are selected among the Gauss points of a given finite element mesh, and the target subspaces of functions are represented by orthogonal basis matrices constructed from the values of the functions at such Gauss points, using the singular value decomposition (SVD). This discrete framework allows us to treat also problems in which the integrals are approximated as a weighted sum of the contribution of each finite element, as in the energy-conserving sampling and weighting method of C. Farhat and co-workers. Two distinct solution strategies are examined. The first one is a greedy strategy based on an enhanced version of the empirical cubature method (ECM) developed by the authors elsewhere (we call it the subspace-adaptive weights ECM, SAW-ECM for short), while the second method is based on a convexification of the cubature problem so that it can be addressed by linear programming algorithms. We show in a toy problem involving integration of polynomial functions that the SAW-ECM clearly outperforms the other method both in terms of computational cost and optimality. On the other hand, we illustrate the performance of the SAW-ECM in the construction of a local HROMs in a highly nonlinear equilibrium problem (large strains regime). We demonstrate that, provided that the subspace-transition errors are negligible, the error associated to hyperreduction using adaptive weights can be controlled by the truncation tolerances of the SVDs used for determining the basis matrices. We also show that the number of integration points decreases notably as the number of subspaces increases, and that, in the limiting case of using as many subspaces as snapshots, the SAW-ECM delivers rules with a number of integration points only dependent on the intrinsic dimensionality of the solution manifold and the degree of overlapping required to avoid subspace-transition errors. The Python source codes of the proposed SAW-ECM are openly accessible in the public repository https://github.com/Rbravo555/localECM., The authors acknowledge the support of the European High-Performance Computing Joint Undertaking (JU) under Grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway), as well as the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” J. A. Hernández expresses gratitude by the support of, on the one hand, the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00), and, on the other hand, the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 952966 (project FIBREGY). Lastly, both J. R. Bravo and S. Ares de Parga acknowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for the financial support through doctoral Grants FI-SDUR 2020 and FI SDUR-2021, respectively., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Geometrically parametrised reduced order models for studying the hysteresis of the Coanda effect in finite element-based incompressible fluid dynamics

  • Bravo Martínez, José Raúl|||0000-0002-4465-7536
  • Stabile, Giovanni
  • Hess, Martin
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Rozza, Gianluigi
This article presents a general reduced order model (ROM) framework for addressing fluid dynamics problems involving time-dependent geometric parametrisations. The framework integrates Proper Orthogonal Decomposition (POD) and Empirical Cubature Method (ECM) hyper-reduction techniques to effectively approximate incompressible computational fluid dynamics simulations. To demonstrate the applicability of this framework, we investigate the behavior of a planar contraction-expansion channel geometry exhibiting bifurcating solutions known as the Coanda effect. By introducing time-dependent deformations to the channel geometry, we observe hysteresis phenomena in the solution. The paper provides a detailed formulation of the framework, including the stabilised finite elements full order model (FOM) and ROM, with a particular focus on the considerations related to geometric parametrisation. Subsequently, we present the results obtained from the simulations, analysing the solution behavior in a phase space for the fluid velocity at a probe point, considered as the Quantity of Interest (QoI). Through qualitative and quantitative evaluations of the ROMs and hyper-reduced order models (HROMs), we demonstrate their ability to accurately reproduce the complete solution field and the QoI. While HROMs offer significant computational speedup, enabling efficient simulations, they do exhibit some errors, particularly for testing trajectories. However, their value lies in applications where the detection of the Coanda effect holds paramount importance, even if the selected bifurcation branch is incorrect. Alternatively, for more precise results, HROMs with lower speedups can be employed., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D (CEX2018-000797-S)”. This project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 955558. The JU receives support from the European Union's Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway. This publication is part of the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. J.R. Bravo acknowledges the financial support of both the Bank Santander, and the Departament de Recerca i Universitats de la Generalitat de Catalunya through the FI-SDUR 2020 scholarship. J.A Hernández also thanks the support of “MCIN/AEI/10.13039/501100011033/ y por FEDER una manera de hacer Europa (PID2021-122518OB-I00)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Endovascular repair of aortic dissection with a bioresorbable patch: Computational and experimental study

  • Bracco, Marta Irene
  • Canalejo-Codina, Francesc
  • Giuliodori, Agustina
  • Montanino, Andrea
  • Martorell, Jordi
  • Soudah, Eduardo
This study introduces an experimentally-calibrated finite-element framework to predict the endovascular sealing performance of a bioresorbable patch for aortic dissection repair. The patch–aortic wall interaction was modeled using an adhesion-enabled contact formulation, with parameters derived from a custom dye-penetration test to replicate in-vivo tissue adhesion. A parametric analysis assessed the impact of tear size (10–20 mm), tear morphology (round vs. circumferential ellipse), and deployment angle (5º–20º) on patch sealing efficiency, wall compliance, and local stress distribution under physiological loading. Tear geometry was identified as the dominant determinant of sealing: large round tears reduced effective apposition, while circumferential elliptical tears promoted full wall coupling at lower deployment forces. Increasing deployment angle raised insertion forces and impaired circumferential contact. Importantly, pulsatile hemodynamic loading demonstrated that the patch preserved native wall compliance without inducing adverse stress concentrations. By integrating experimental calibration with computational modeling, this framework offers a quantitative tool to evaluate anatomical and procedural factors influencing endovascular sealing. These insights may support the design optimization and clinical translation of resorbable patch-based strategies for aortic dissection repair., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Geometrically parametrised reduced order models for studying the hysteresis of the Coanda effect in finite element-based incompressible fluid dynamics

  • Bravo Martínez, José Raúl
  • Stabile, Giovanni
  • Hess, Martin
  • Hernández Ortega, Joaquín Alberto
  • Rossi, Riccardo
  • Rozza, Gianluigi
This article presents a general reduced order model (ROM) framework for addressing fluid dynamics problems involving time-dependent geometric parametrisations. The framework integrates Proper Orthogonal Decomposition (POD) and Empirical Cubature Method (ECM) hyper-reduction techniques to effectively approximate incompressible computational fluid dynamics simulations. To demonstrate the applicability of this framework, we investigate the behavior of a planar contraction-expansion channel geometry exhibiting bifurcating solutions known as the Coanda effect. By introducing time-dependent deformations to the channel geometry, we observe hysteresis phenomena in the solution. The paper provides a detailed formulation of the framework, including the stabilised finite elements full order model (FOM) and ROM, with a particular focus on the considerations related to geometric parametrisation. Subsequently, we present the results obtained from the simulations, analysing the solution behavior in a phase space for the fluid velocity at a probe point, considered as the Quantity of Interest (QoI). Through qualitative and quantitative evaluations of the ROMs and hyper-reduced order models (HROMs), we demonstrate their ability to accurately reproduce the complete solution field and the QoI. While HROMs offer significant computational speedup, enabling efficient simulations, they do exhibit some errors, particularly for testing trajectories. However, their value lies in applications where the detection of the Coanda effect holds paramount importance, even if the selected bifurcation branch is incorrect. Alternatively, for more precise results, HROMs with lower speedups can be employed., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D (CEX2018-000797-S)”. This project has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 955558. The JU receives support from the European Union's Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway. This publication is part of the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. J.R. Bravo acknowledges the financial support of both the Bank Santander, and the Departament de Recerca i Universitats de la Generalitat de Catalunya through the FI-SDUR 2020 scholarship. J.A Hernández also thanks the support of “MCIN/AEI/10.13039/501100011033/ y por FEDER una manera de hacer Europa (PID2021-122518OB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Preconditioning iterative solvers via the Empirical Interscale Finite Element Method (EIFEM)

  • Rubio Serrano, Raúl
  • Ferrer Ferré, Àlex
  • Hernández Ortega, Joaquín Alberto
This work explores the use of the Empirical Interscale Finite Element Method (EIFEM) as a novel preconditioner for iterative solvers in the linear elastic regime. Originally developed as a multiscale Reduced Order Model (ROM), EIFEM captures the kinematics of a unit cell and leverages static condensation with a reduced basis to construct a coarse approximation. We integrate EIFEM as a coarse space within a preconditioned conjugate gradient solver, incorporating pre- and post-smoothing steps. Numerical experiments confirm that EIFEM-based preconditioning significantly reduces iteration counts, particularly for near-solid structures. Although non-solid structures also benefit from reduced iteration counts, the convergence rate is lower compared to solid or nearly-solid cases. This behavior stems from the sensitivity of the solver to the accuracy of the ROM approximation, and we show discontinuous edge functions and discuss other potential strategies as a way to enhance this accuracy. In terms of scalability, the preconditioner is robust, maintaining a nearly constant iteration count as the problem size increases. This work is the first application of EIFEM for preconditioning purposes, demonstrating its potential as a scalable and efficient preconditioner for iterative solvers in 2D and 3D geometries., R.Rubio and A.Ferrer gratefully acknowledge the support of the following projects: ”Optimización topológica con compuestos y materiales flexibles” (PID2023-153213NA-I00), ”Disseny computacionalòptim de bateries amb materials compostos sostenibles per a una mobilitat més eficient” (ACE122/24/000030) and ”Design of flexible materials, structures via shape and topology optimization” (PCI2024-155060-2). J.A. Hernández expresses gratitude by the support of the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient procedure for the blood flow computer simulation of patient-specific aortic dissections

  • Zorrilla Martínez, Rubén
  • Soudah Prieto, Eduardo
In this work we present a novel methodology for the numerical simulation of patient-specific aortic dissections. Our proposal, which targets the seamless virtual prototyping of customized scenarios, combines an innovative two-step segmentation procedure with a CutFEM technique capable of dealing with thin-walled bodies such as the intimal flap. First, we generate the fluid mesh from the outer aortic wall disregarding the intimal flap, similarly to what would be done in a healthy aorta. Second, we create a surface mesh from the approximate midline of the intimal flap. This approach allows us to decouple the segmentation of the fluid volume from that of the intimal flap, thereby bypassing the need to create a volumetric mesh around a thin-walled body, an operation widely known to be complex and error-prone. Once the two meshes are obtained, the original configuration of the dissection into true and false lumen is recovered by embedding the surface mesh into the volumetric one and calculating a level set function that implicitly represents the intimal flap in terms of the volumetric mesh entities. We then leverage the capabilities of unfitted mesh methods, specifically relying on a CutFEM technique tailored for thin-walled bodies, to impose the wall boundary conditions over the embedded intimal flap. We tested the method by simulating the flow in four patient-specific aortic dissections, all involving intricate geometrical patterns. In all cases, the preprocess is greatly simplified with no impact on the computational times. Additionally, the obtained results are consistent with clinical evidence and previous research., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S). Eduardo Soudah acknowledges the support of “Proyecto CPP2021-008546 financiado por MCIN/AEI/10.13039/501100011033 por la Unión Europea NextGenerationEU/ PRTR” and “Proyecto PID2021-122518OB-I00 financiado por MCIN/AEI/ 10.13039/501100011033 por FEDER Una manera de hacer Europa ”. Finally, the authors gratefully thank Aortyx and Mr. Yago Trias for the collaboration in the segmentation of the four patient-specific scenarios., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models

  • Bravo Martínez, José Raúl
  • Hernández Ortega, Joaquín Alberto
  • Ares de Parga Regalado, Sebastian
  • Rossi, Riccardo
This is the peer reviewed version of the following article: Bravo JR, Hernández JA, Ares de Parga S, Rossi R. A subspace-adaptive weights cubature method with application to the local hyperreduction of parameterized finite element models. Int J Numer Methods Eng. 2024;e7590. doi: 10.1002/nme.7590, which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/nme.7590. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., This article is concerned with quadrature/cubature rules able to deal with multiple subspaces of functions, in such a way that the integration points are common for all the subspaces, yet the (nonnegative) weights are tailored to each specific subspace. These subspace-adaptive weights cubature rules can be used to accelerate computational mechanics applications requiring efficiently evaluating spatial integrals whose integrand function dynamically switches between multiple pre-computed subspaces. One of such applications is local hyperreduced-order modeling (HROM), in which the solution manifold is approximately represented as a collection of basis matrices, each basis matrix corresponding to a different region in parameter space. The proposed optimization framework is discrete in terms of the location of the integration points, in the sense that such points are selected among the Gauss points of a given finite element mesh, and the target subspaces of functions are represented by orthogonal basis matrices constructed from the values of the functions at such Gauss points, using the singular value decomposition (SVD). This discrete framework allows us to treat also problems in which the integrals are approximated as a weighted sum of the contribution of each finite element, as in the energy-conserving sampling and weighting method of C. Farhat and co-workers. Two distinct solution strategies are examined. The first one is a greedy strategy based on an enhanced version of the empirical cubature method (ECM) developed by the authors elsewhere (we call it the subspace-adaptive weights ECM, SAW-ECM for short), while the second method is based on a convexification of the cubature problem so that it can be addressed by linear programming algorithms. We show in a toy problem involving integration of polynomial functions that the SAW-ECM clearly outperforms the other method both in terms of computational cost and optimality. On the other hand, we illustrate the performance of the SAW-ECM in the construction of a local HROMs in a highly nonlinear equilibrium problem (large strains regime). We demonstrate that, provided that the subspace-transition errors are negligible, the error associated to hyperreduction using adaptive weights can be controlled by the truncation tolerances of the SVDs used for determining the basis matrices. We also show that the number of integration points decreases notably as the number of subspaces increases, and that, in the limiting case of using as many subspaces as snapshots, the SAW-ECM delivers rules with a number of integration points only dependent on the intrinsic dimensionality of the solution manifold and the degree of overlapping required to avoid subspace-transition errors. The Python source codes of the proposed SAW-ECM are openly accessible in the public repository https://github.com/Rbravo555/localECM., The authors acknowledge the support of the European High-Performance Computing Joint Undertaking (JU) under Grant agreement No. 955558 (the JU receives, in turn, support from the European Union’s Horizon 2020 research and innovation programme and Spain, Germany, France, Italy, Poland, Switzerland, Norway), as well as the R&D project PCI2021-121944, financed by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” J. A. Hernández expresses gratitude by the support of, on the one hand, the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00), and, on the other hand, the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 952966 (project FIBREGY). Lastly, both J. R. Bravo and S. Ares de Parga acknowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for the financial support through doctoral Grants FI-SDUR 2020 and FI SDUR-2021, respectively., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Computational model for retinal haemodynamics under gravitational and postural variations

  • Nigro, Michele
  • Montanino, Andrea
  • Soudah Prieto, Eduardo
Spaceflight-associated neuro-ocular syndrome presents a significant risk during long-duration spaceflight, yet the retinal mechanisms underlying these visual changes remain poorly characterized. We developed a physiologically detailed lumped-parameter model coupling a five-compartment retinal vascular network with a dynamic intraocular pressure module responsive to hydrostatic shifts. Head-down tilt experiments were reproduced to emulate cephalad fluid shifts in microgravity. Model outputs are closely aligned with experimental benchmarks. Intraocular pressure increased from 16.3 mmHg (upright) to 29.5 mmHg at -30° (81% increase), while ocular perfusion pressure remained within 2 mmHg, reflecting haemodynamic responses. Retinal blood-flow predictions fell within the interquartile range of in vivo Doppler measurements, and peak systolic velocity trends in the central retinal artery agreed within 1% of ultrasound data after incorporating a microgravity-induced 4% central retinal artery constriction. These findings validate the model's ability to capture the coupled influence of systemic arterial pressure, venous drainage and intraocular pressure on retinal perfusion across gravitational states. Simulations revealed that posture-induced elevations in arterial pressure and intraocular pressure propagate non-linearly through the retinal tree, imposing the greatest mechanical stress on the central retinal artery and arteriolar segments, critical sites for flow dysregulation and potential optic nerve damage. By integrating retinal and ocular biomechanics, the model developed in this work offers mechanistic insight into the pathogenesis of neuro-ocular syndrome, establishes quantitative thresholds to inform countermeasure development, and provides a transferable tool for terrestrial disorders involving intraocular pressure and vascular dysregulation, such as glaucoma and hypertensive retinopathy., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the support of ‘Proyecto CPP2021-008546 financiado por MCIN/AEI/10.13039/501100011033’ por la Unio´n Europea NextGeneration EU/PRTR’ and ’Proyecto PID2021-122518OBI00 financiado por MCIN/AEI/10.13039/501100011033’ por FEDER Una manera de hacer Europa’., Peer Reviewed, Postprint (published version)