Pasar al contenido principal

OPTIMIZACION TOPOLOGICA CON COMPUESTOS Y MATERIALES FLEXIBLES

PID2023-153213NA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Preconditioning iterative solvers via the Empirical Interscale Finite Element Method (EIFEM)

  • Rubio Serrano, Raúl|||0000-0002-1317-8153
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
This work explores the use of the Empirical Interscale Finite Element Method (EIFEM) as a novel preconditioner for iterative solvers in the linear elastic regime. Originally developed as a multiscale Reduced Order Model (ROM), EIFEM captures the kinematics of a unit cell and leverages static condensation with a reduced basis to construct a coarse approximation. We integrate EIFEM as a coarse space within a preconditioned conjugate gradient solver, incorporating pre- and post-smoothing steps. Numerical experiments confirm that EIFEM-based preconditioning significantly reduces iteration counts, particularly for near-solid structures. Although non-solid structures also benefit from reduced iteration counts, the convergence rate is lower compared to solid or nearly-solid cases. This behavior stems from the sensitivity of the solver to the accuracy of the ROM approximation, and we show discontinuous edge functions and discuss other potential strategies as a way to enhance this accuracy. In terms of scalability, the preconditioner is robust, maintaining a nearly constant iteration count as the problem size increases. This work is the first application of EIFEM for preconditioning purposes, demonstrating its potential as a scalable and efficient preconditioner for iterative solvers in 2D and 3D geometries., R.Rubio and A.Ferrer gratefully acknowledge the support of the following projects: ”Optimización topológica con compuestos y materiales flexibles” (PID2023-153213NA-I00), ”Disseny computacionalòptim de bateries amb materials compostos sostenibles per a una mobilitat més eficient” (ACE122/24/000030) and ”Design of flexible materials, structures via shape and topology optimization” (PCI2024-155060-2). J.A. Hernández expresses gratitude by the support of the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On a level set and topological derivative-based strategy for connectivity constraints in topology optimization

  • Castello de Andrade, Giovanna
  • Donoso Bellón, Alberto
  • Ruiz Gracia, David
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
This work addresses a level set-based framework for connectivity constraints in shape and topology optimization, using the concept of topological derivative. By controlling the presence of disconnected material components in optimal designs, the goal is to ensure that optimal solutions are also physically realizable in terms of additive manufacturing and of its final application. The proposed strategy is an extension of the continuous spectral graph approach, originally introduced in Donoso et al. (Struct Multidisc Optim 66(4):71, 2023. https://doi.org/10.1007/s00158-023-03526-8) in the density-based framework, which identifies and enforces connectivity based on the spectrum of a two-phase differential operator. The effectiveness of the strategy is demonstrated through several benchmark problems in structural optimization, in two and three dimensions. Numerical challenges and limitations such as filtering strategies and parameter dependence are illustrated and successful simulations are obtained with either the addition of perimeter penalization or a dilation operator., Authors acknowledge financial support from the São Paulo Research Foundation (FAPESP) through grants #2021/14604- 1 and #2024/02939-7; from the Spanish Ministerio de Ciencia e Innovación through grants PID2023-153213NA-I00 (TOMAT project), PCI2024-155060-2 (FLEXION project), and PID2023-151823NB-I00; and from Junta de Comunidades de Castilla – La Mancha through grant SBPLY/23/180225/000023.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A null space algorithm for solving multiple-constrained topology optimization problems with topological derivatives

  • Torres Lerma, Jose Antonio|||0000-0002-3684-2811
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
Topology optimization is widely regarded as one of the most effective techniques for structural design. However, current algorithms used for level-set approaches often introduce fine tuning of parameters and generally exhibit low speed of convergence, specially when dealing with multiple constraints. Consequently, a fundamental aspect in topology optimization is to have access to a robust optimization scheme. Recently, the null space algorithm has exhibit solid performance when considering density and shape optimization approaches. The aim of this paper is to extend the null space approach to also consider topological derivatives for level-set methods. The idea relies on continuing the current fix-point techniques with the null space algorithm. The proposed optimizer has much less free parameters in comparison with the well-known augmented Lagrangian algorithm. Besides, we also consider box constraints in the dual computation to reduce the oscillations in the density case. The proposed method naturally handles inactive constraints, which are particularly relevant for engineering applications. Several numerical examples, including multiple constraints, show that results are obtained effectively with an adequate numerical stability., The first author would like to acknowledge the support of the Catalan Government (Agència de Gestió d’Ajuts Universitaris i de Recerca, Spain) through Joan Oró Grant 2022FI_B_00763. In addition, the third author would also like to acknowledge the support of the Catalan Government through a Serra Húnter Fellow. Overall, the present work has been financed by the TOMAT (PID2023-153213NA-I00) and FLEXION (PCI2024-155060-2) Spanish projects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Isotropic phase-field models: Linking degradation to microstructural homogenisation

  • Villalta i Quintana, Gerard|||0000-0003-4625-9010
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
Phase-field fracture models often employ isotropic degradation functions introduced from a phenomenological perspective, with limited mechanical interpretation. In this work, the classical phase-field formulations are adapted to enable a microstructural interpretation of such degradation laws. Drawing on homogenisation theory and topology optimisation, conventional analytical phase-field models are examined as effective representations of isotropic microstructures containing voids. Their admissibility is assessed through compliance with the Hashin–Shtrikman bounds, showing that only a subset of commonly used formulations can be consistently interpreted within a microstructural framework. Additional constraints arise during damage nucleation and the prescription of the associated critical stress, leading to an upper bound on the admissible phase-field length-scale. Building on this analysis, new phase-field degradation models are constructed directly from homogenised isotropic microstructures based on hexagonal and tetradecahedral unit cells. These models inherently satisfy the Hashin–Shtrikman bounds and naturally induce isotropic degradation behaviour without increasing constitutive complexity. The implications of whether degradation models comply with Hashin–Shtrikman bounds are illustrated through benchmark problems, including uniaxial tension and shear tests., This research was co-funded by the Department of Research and Universities of the Government of Catalonia and the European Social Fund Plus under Beca 2024 FI-2 00934. Additional support was provided by the Ministry of Science, Innovation and Universities of the Spanish Government through the project TOMAT (reference: PID2023-153213NA-I00). We gratefully acknowledge all this support., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Phase-field modeling of fracture via homogenization

  • Villalta i Quintana, Gerard|||0000-0003-4625-9010
  • Ferrer Ferré, Àlex|||0000-0003-1011-0230
  • Otero Gruer, Fermín Enrique|||0000-0002-3776-7550
This study presents a novel phase-field modeling approach for brittle fracture that incorporates computational homogenization techniques to characterize the microstructural degradation of the material. Traditional phase-field models often implement degradation and dissipation functions in terms of the phase-field variable that, despite offering satisfactory results, their physical interpretation and their extension to anisotropic fracture behavior is not always clear. To address this challenge, we develop a framework inspired by the nucleation, growth, and coalescence of microstructural voids to model macroscopic fracture. The proposed approach employs homogenization techniques to calculate the effective material properties when introducing voids of varying sizes and shapes. By solving the homogenization problem for different void geometries, we obtain degradation functions that relate the size of microstructural voids to the homogenized constitutive tensor. These degradation functions provide a direct link between microscale damage mechanisms and macroscale fracture behavior. Comparative analyses with conventional AT1 and AT2 models reveal strong correlations between their response and those obtained via homogenization techniques. This relationship highlights the ability of homogenized models to not only replicate established results but also provide a new understanding of the phase-field variable., This research was co-funded by the Ministry of Research and Universities of the Government of Catalonia and the European Social Fund Plus under Beca 2024 FI-2 00934. Additional support was provided by the Ministry of Science, Innovation and Universities of the Spanish Government through the project TOMAT (reference: PID2023-153213NAI00). We gratefully acknowledge all this support., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Phase-field modeling of fracture via homogenization

  • Villalta i Quintana, Gerard
  • Ferrer Ferré, Àlex
  • Otero Gruer, Fermín Enrique
This study presents a novel phase-field modeling approach for brittle fracture that incorporates computational homogenization techniques to characterize the microstructural degradation of the material. Traditional phase-field models often implement degradation and dissipation functions in terms of the phase-field variable that, despite offering satisfactory results, their physical interpretation and their extension to anisotropic fracture behavior is not always clear. To address this challenge, we develop a framework inspired by the nucleation, growth, and coalescence of microstructural voids to model macroscopic fracture. The proposed approach employs homogenization techniques to calculate the effective material properties when introducing voids of varying sizes and shapes. By solving the homogenization problem for different void geometries, we obtain degradation functions that relate the size of microstructural voids to the homogenized constitutive tensor. These degradation functions provide a direct link between microscale damage mechanisms and macroscale fracture behavior. Comparative analyses with conventional AT1 and AT2 models reveal strong correlations between their response and those obtained via homogenization techniques. This relationship highlights the ability of homogenized models to not only replicate established results but also provide a new understanding of the phase-field variable., This research was co-funded by the Ministry of Research and Universities of the Government of Catalonia and the European Social Fund Plus under Beca 2024 FI-2 00934. Additional support was provided by the Ministry of Science, Innovation and Universities of the Spanish Government through the project TOMAT (reference: PID2023-153213NAI00). We gratefully acknowledge all this support., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A null space algorithm for solving multiple-constrained topology optimization problems with topological derivatives

  • Torres Lerma, Jose Antonio
  • Otero Gruer, Fermín Enrique
  • Ferrer Ferré, Àlex
Topology optimization is widely regarded as one of the most effective techniques for structural design. However, current algorithms used for level-set approaches often introduce fine tuning of parameters and generally exhibit low speed of convergence, specially when dealing with multiple constraints. Consequently, a fundamental aspect in topology optimization is to have access to a robust optimization scheme. Recently, the null space algorithm has exhibit solid performance when considering density and shape optimization approaches. The aim of this paper is to extend the null space approach to also consider topological derivatives for level-set methods. The idea relies on continuing the current fix-point techniques with the null space algorithm. The proposed optimizer has much less free parameters in comparison with the well-known augmented Lagrangian algorithm. Besides, we also consider box constraints in the dual computation to reduce the oscillations in the density case. The proposed method naturally handles inactive constraints, which are particularly relevant for engineering applications. Several numerical examples, including multiple constraints, show that results are obtained effectively with an adequate numerical stability., The first author would like to acknowledge the support of the Catalan Government (Agència de Gestió d’Ajuts Universitaris i de Recerca, Spain) through Joan Oró Grant 2022FI_B_00763. In addition, the third author would also like to acknowledge the support of the Catalan Government through a Serra Húnter Fellow. Overall, the present work has been financed by the TOMAT (PID2023-153213NA-I00) and FLEXION (PCI2024-155060-2) Spanish projects., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Isotropic phase-field models: Linking degradation to microstructural homogenisation

  • Villalta i Quintana, Gerard
  • Otero Gruer, Fermín Enrique
  • Ferrer Ferré, Àlex
Phase-field fracture models often employ isotropic degradation functions introduced from a phenomenological perspective, with limited mechanical interpretation. In this work, the classical phase-field formulations are adapted to enable a microstructural interpretation of such degradation laws. Drawing on homogenisation theory and topology optimisation, conventional analytical phase-field models are examined as effective representations of isotropic microstructures containing voids. Their admissibility is assessed through compliance with the Hashin–Shtrikman bounds, showing that only a subset of commonly used formulations can be consistently interpreted within a microstructural framework. Additional constraints arise during damage nucleation and the prescription of the associated critical stress, leading to an upper bound on the admissible phase-field length-scale. Building on this analysis, new phase-field degradation models are constructed directly from homogenised isotropic microstructures based on hexagonal and tetradecahedral unit cells. These models inherently satisfy the Hashin–Shtrikman bounds and naturally induce isotropic degradation behaviour without increasing constitutive complexity. The implications of whether degradation models comply with Hashin–Shtrikman bounds are illustrated through benchmark problems, including uniaxial tension and shear tests., This research was co-funded by the Department of Research and Universities of the Government of Catalonia and the European Social Fund Plus under Beca 2024 FI-2 00934. Additional support was provided by the Ministry of Science, Innovation and Universities of the Spanish Government through the project TOMAT (reference: PID2023-153213NA-I00). We gratefully acknowledge all this support., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Preconditioning iterative solvers via the Empirical Interscale Finite Element Method (EIFEM)

  • Rubio Serrano, Raúl
  • Ferrer Ferré, Àlex
  • Hernández Ortega, Joaquín Alberto
This work explores the use of the Empirical Interscale Finite Element Method (EIFEM) as a novel preconditioner for iterative solvers in the linear elastic regime. Originally developed as a multiscale Reduced Order Model (ROM), EIFEM captures the kinematics of a unit cell and leverages static condensation with a reduced basis to construct a coarse approximation. We integrate EIFEM as a coarse space within a preconditioned conjugate gradient solver, incorporating pre- and post-smoothing steps. Numerical experiments confirm that EIFEM-based preconditioning significantly reduces iteration counts, particularly for near-solid structures. Although non-solid structures also benefit from reduced iteration counts, the convergence rate is lower compared to solid or nearly-solid cases. This behavior stems from the sensitivity of the solver to the accuracy of the ROM approximation, and we show discontinuous edge functions and discuss other potential strategies as a way to enhance this accuracy. In terms of scalability, the preconditioner is robust, maintaining a nearly constant iteration count as the problem size increases. This work is the first application of EIFEM for preconditioning purposes, demonstrating its potential as a scalable and efficient preconditioner for iterative solvers in 2D and 3D geometries., R.Rubio and A.Ferrer gratefully acknowledge the support of the following projects: ”Optimización topológica con compuestos y materiales flexibles” (PID2023-153213NA-I00), ”Disseny computacionalòptim de bateries amb materials compostos sostenibles per a una mobilitat més eficient” (ACE122/24/000030) and ”Design of flexible materials, structures via shape and topology optimization” (PCI2024-155060-2). J.A. Hernández expresses gratitude by the support of the “MCIN/AEI/10.13039/501100011033/y por FEDER una manera de hacer Europa” (PID2021-122518OB-I00)., Peer Reviewed, Postprint (author's final draft)