Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 75
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Importance of the Rotational Transform for L-H Transitions in the TJ-II Stellarator

  • Van Milligen, Boudewijn Philip
  • Estrada, Teresa
  • Carreras Verdaguer, Benjamin A.
  • García Gonzalo, Luis
We study the effect of the rotational transform profile on the L-H confinement transitions in the neutral beam-heated plasmas in the TJ-II stellarator. The rotational transform profile in the vacuum is determined by the external coil currents but is modified by the plasma current, (Formula presented.). We find that L-H confinement transitions systematically occur when the configuration and plasma current are such that a low-order rational is placed in the plasma edge region, with a distribution centered around (Formula presented.). It is suggested that magnetohydrodynamic turbulence plays an important role in triggering the L-H transitions at TJ-II., Research sponsored in part by the Ministerio de Ciencia e Innovación of Spain under project Nos. PID2021-124883NB-I00, PID2021-125607NB-I00, and PID2022-137869OB-I00. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. B.A.C. gratefully acknowledges support for the research from the DOE office of Fusion Energy under US Department of Energy Contract No. DE-SC0018076.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Overview of T and D-T results in JET with ITER-like wall

  • Maggi, C.F.
  • Varela Rodríguez, Jacobo
Proceedings of: 29th IAEA Fusion Energy Conference 16th-21st October 2023 London, UK, In 2021 JET exploited its unique capabilities to operate with T and D–T fuel with an ITER-like Be/W wall (JET-ILW). This second major JET D–T campaign (DTE2), after DTE1 in 1997, represented the culmination of a series of JET enhancements—new fusion diagnostics, new T injection capabilities, refurbishment of the T plant, increased auxiliary heating, in-vessel calibration of 14 MeV neutron yield monitors—as well as significant advances in plasma theory and modelling in the fusion community. DTE2 was complemented by a sequence of isotope physics campaigns encompassing operation in pure tritium at high T-NBI power. Carefully conducted for safe operation with tritium, the new T and D–T experiments used 1 kg of T (vs 100 g in DTE1), yielding the most fusion reactor relevant D–T plasmas to date and expanding our understanding of isotopes and D–T mixture physics. Furthermore, since the JET T and DTE2 campaigns occurred almost 25 years after the last major D–T tokamak experiment, it was also a strategic goal of the European fusion programme to refresh operational experience of a nuclear tokamak to prepare staff for ITER operation. The key physics results of the JET T and DTE2 experiments, carried out within the EUROfusion JET1 work package, are reported in this paper. Progress in the technological exploitation of JET D–T operations, development and validation of nuclear codes, neutronic tools and techniques for ITER operations carried out by EUROfusion (started within the Horizon 2020 Framework Programme and continuing under the Horizon Europe FP) are reported in (Litaudon et al Nucl. Fusion accepted), while JET experience on T and D–T operations is presented in (King et al Nucl. Fusion submitted)., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Stable Deuterium-Tritium plasmas with improved confinement in the presence of energetic-ion instabilities

  • García, Jerónimo
  • Kazakov, Yevgen
  • Coelho, Rui
  • Dreval, Mykola
  • de La Luna, Elena
  • Solano, Emilia R.
  • Štancar, Žiga
  • Varela Rodríguez, Jacobo
  • Baruzzo, Matteo
  • Belli, Emily
  • Bonofiglo, Phillip J.
  • Candy, Jeff
  • Maggi, Costanza F.
  • Mailloux, Joelle
  • Mazzi, Samuele
  • Ongena, Jef
  • Ruiz, Juan R.
  • Poradzinski, Michal
  • Sharapov, Sergei
  • Zarzoso, David
Providing stable and clean energy sources is a necessity for the increasing demands of humanity. Energy produced by Deuterium (D) and Tritium (T) fusion reactions, in particular in tokamaks, is a promising path towards that goal. However, there is little experience with plasmas formed by D-T mixtures, since most of the experiments are currently performed in pure D. After more than 20 years, the Joint European Torus (JET) has carried out new D-T experiments with the aim of exploring some of the unique characteristics expected in future fusion reactors, such as the presence of highly energetic ions in low plasma rotation conditions. A new stable, high confinement and impurity-free D-T regime, with reduction of energy losses with respect to D, has been found. Multiscale physics mechanisms critically determine the thermal confinement. These crucial achievements importantly contribute to the establishment of fusion energy generation as an alternative to fossil fuels., J. Garcia would like to thank Gerardo Giruzzi for fruitful discussions. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement nos. 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. This work was supported in part by Grants FIS2017-85252-R and PID2021-127727OB-I00 funded by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13039/501100011033, by ERDF “A way of making Europe” and by ERDF/EU. An award of computer time was provided by the INCITE program and ALCC program. This research used resources from the Oak Ridge Leadership Computing Facility, which is an Office of Science User Facility supported under Contract DE-AC05-00OR22725. Computing resources were also provided by the National Energy Research Scientific Computing Center, which is an Office of Science User Facility supported under Contract DEAC02-05CH11231. This work was partially supported by the project US DOE under grant DE-FG02-04ER54742. D.Z. received financial support from the AIM4EP Project (ANR-21-CE30-0018), funded by the French National Research Agency (ANR).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Theoretical analysis of the energetic particle mode decay: Frequency down-sweeping and the role of the shear flows

  • Varela Rodríguez, Jacobo
  • García Gonzalo, Luis
Documento escrito por un elevado número de autores/as, solo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M, The present study is dedicated to the analysis of energetic particle modes (EPMs) in fusion devices. The aim of the analysis is reproducing the EPM frequency down-sweeping and the transition from energetic particle (EP)-driven to current- or pressure-gradient-driven instabilities observed in the experiments. In addition, the shear flow generation and its effect on the EPM saturation and decay phases are analyzed. Two test cases are considered: Fish-bones destabilized in a JET configuration and energetic-ion-driven resistive interchange modes (EICs) triggered in a Large Helical Device (LHD) discharge. A set of nonlinear simulations using the gyro-fluid code FAR3d are performed, removing the EP drive along the saturation phase of Fish-bones and EIC, analyzing the EPMs' decay with and without the presence of shear flows. The simulations reproduce the EPM's frequency down-sweeping along with the transition from a Fish-bone to the current-driven 1/1 internal kink in the JET case, as well as the transition from EIC to the pressure gradient-driven 1/1 resistive interchange mode in the LHD case. The simulations show the generation of shear flows and radial electric fields in the plasma location where the Fish-bone/EIC decay, linked to the energy transfer from the modes toward the thermal plasma. Linear simulations performed using the evolved profiles from nonlinear simulations highlight the key role of the shear flows in the decay of Fish-bones, pointing out the mode frequency down-sweeping can only be reproduced in simulations including the effect of the shear flows. In addition, the analysis may indicate shear flows have a regulatory effect on the Fish-bone saturation, leading to a smoother mode decay by balancing the energy extraction caused by the continuum damping. On the other hand, the role of shear flows in the EIC decay is smaller compared to the Fish-bones, explained by narrower and almost steady shear flow bands observed in the simulations., This work was supported by the EUROfusion project CfP-FSD-AWP23-TE-04-JET, the U.S. DOE under Grant No. DE-FG02-04ER54742, and the Spanish National Research Project No. PID2022-137869OB-I00. Data available on request from the authors. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. Use has been made of Uranus, a supercomputed cluster located at the Universidad Carlos III de Madrid (Spain) and funded jointly by EU FEDER funds and by the Spanish Government via national projects UNC313-4E-23612, ENE2009-12213-C03-03, ENE2012-33219, ENE2012-31753, and ENE2015-68265
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Study of runaway electron dynamics in FTU using synchrotron spectra and imaging measurements

  • Ghillardi, G.
  • Barcellona, C.
  • Esposito, B.
  • Hoppe, M.
  • Pucella, G.
  • Martín Solís, José Ramón
  • Monti, C.
  • Piergotti, V.
  • Rocchi, G.
  • Boncagni, L.
  • Causa, F.
The behavior of runaway electrons of Frascati Tokamak Upgrade (FTU) discharges is investigated through the comparison of experimental synchrotron emission spectra and visible images with their synthetic counterparts. Synchrotron spectra are measured in an unprecedented wide wavelength range (450-4000 nm) while synchrotron images are collected by a visible CCD camera. The simulated spectra and images are calculated with the synthetic synchrotron radiation diagnostic SOFT (Synchrotron-detecting Orbit Following Toolkit) code. The aim of this work is to extend the study of runaway electrons dynamics in FTU also to post-disruption phases. The runaway number, radial profile, energy and pitch angle have been evaluated during their whole time evolution, from the start-up to the post-disruption phase, assuming a given runaway electrons (RE) distribution function. The runaway number is found to increase by two orders of magnitude after the disruption, while the energy and pitch angle maintain similar values before and after the disruption. The runaway electrons are mostly distributed in the core of the plasma. The inferred maximum RE energy and pitch angle are in agreement with the results of simulations based on a runaway electron test particle model., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. Part of this work was done under financial support from Projects ENE2015-66444-R (MINECO/FEDER, UE) and PID2019-110734RB-I00 (AEI, Spain).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Rational surfaces, flows and radial structure in the TJ-II stellarator

  • Van Milligen, B.Ph.
  • Voldiner, I.
  • Carreras Verdaguer, Benjamin A.
  • Ochando, Maria A.
  • García Gonzalo, Luis
In this work, we report on the results obtained by measuring several turbulent quantities well inside the plasma edge by means of a Langmuir probe during dynamical rotational transform scans in the TJ-II stellarator, while applying a radial electric field to the edge plasma using a biasing probe. By calculating the intermittence parameter from floating potential measurements, we are able to identify a major low order rational surface and hence relate the probe measurements to the local value of the rotational transform. Based on the former, we are able to show that the poloidal plasma velocity (and hence radial electric field) has a significant radial structure that is clearly related to the rotational transform profile and in particular the lowest order rational surfaces in the range studied. The poloidal velocity is also affected by the edge biasing. The particle flux was also found to exhibit a radial pattern, as did the flow shear suppression term wExB1, but the relation of the former to the low-order rational surfaces was less clear. We surmise that this lack of direct correspondence is due to an unknown term in the turbulence evolution equation: the instability growth rate, y. We make use of a reduced Magnetohydrodynamic turbulence model to interpret the results. Overall, a picture is obtained in which the plasma self-organizes towards a state with a clear radial pattern of the radial electric field, in line with expectations from some numerical studies describing the spontaneous formation of an E x B staircase, consisting of alternating layers with fast and slow radial transport. In this state, the radial profiles of various quantities (density, temperature, pressure) will not be smooth., Research sponsored in part by the Ministerio de Ciencia e Innovación of Spain under Project Nos. PID2019-110734RB-I00 and PID2021-124883NB-I00. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200 EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. B A C gratefully acknowledges support for the research from the DOE office of Fusion Energy under U.S. Department of Energy Contract No. DE-SC0018076.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Enhanced confinement induced by pellet injection in the stellarator TJ-II

  • García Cortés, Maria Isabel
  • Mccarthy, K. J.
  • Estrada, T.
  • Tribaldos Macía, Víctor
  • Medina-Roque, D.
  • Van Milligen, B.
  • Ascasibar, E.
  • Carrasco, R.
  • Chmyga, A. A.
  • García, R.
  • Hernández Sánchez, J.
  • Hidalgo, C.
  • Kozachek, A. S.
  • Medina, F.
  • Ochando, M.A.
  • de Pablos, J.L.
  • Panadero, N.
  • Pastor, I.
Enhanced confinement is observed in neutral beam injector (NBI)-heated hydrogen discharges made in the stellarator TJ-II after the injection of a single cryogenic fuel pellet into the plasma core. In addition to the expected increase in electron density, ne, in the core after pellet injection (PI), the plasma diamagnetic energy content is seen to rise, with respect to similar discharges without PI, by up to 40%. Furthermore, the energy confinement time, sE diag, as determined using a diamagnetic loop, is enhanced when compared to predictions obtained using the International Stellarator Scaling law [H. Yamada et al., Nucl. Fusion 45, 1684 (2005)] and the triple product, ne _ Ti _ sE diag, exhibits a clear bifurcation point toward an improved confinement branch as compared to the branch product predicted by this scaling law. In general, once such a pellet-induced enhanced confinement (PiEC) phase has been established, it is characterized by steepened radial density gradients, by more negative plasma potential in the core, more negative radial electric fields, Er, across a broad plasma region, as well as by reductions in density and plasma potential fluctuations in the density gradient region. In addition, experimental observations show increased peaking of core radiation losses, this pointing to edge/core plasma decoupling. In parallel, neoclassical simulations of reference and PiEC plasmas predict increased particle and energy confinement times during a PiEC phase together with a more negative Er profile. Qualitative rather than quantitative agreement with experimental parameters is found, indicating that turbulence seems to play a significant role here. In summary, single cryogenic pellet injection facilitates the achievement of an enhanced operational regime that was previously not observed in NBIheated discharges of the TJ-II., This work is financed by grants PID2020-116599RB-I00 and PID2021-125607NB-I00, funded by MCIN/AEI/10.13039/501100011033. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No.101052200 - EUROfusion). Views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The authors acknowledge the contributions to HIBP data collection, analysis, and interpretation made by A. Melnikov, M. Drabinskiy, L. G. Eliseev, and P. Khabanov as part of the long-term trilateral collaboration between National Research Center ‘Kurchatov Institute,’ Moscow, Russia, led by S. Melnikov, the HIBP group from Kharkov Institute of Physics and Technology, Kharkov, Ukraine, leaded by L.I. Krupnik, and CIEMAT. We also acknowledge the TJ-II Team.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Additive Manufacturing of CuCrZr via Powder Bed Fusion Electron Beam (PBF-EB) as high heat flux material for nuclear fusion applications, Fabricación aditiva de CuCrZr mediante fusión por haz de electrones en lecho de polvo (PBF-EB) como material de alto flujo térmico para aplicaciones de fusión nuclear

  • Canillas Rodríguez, Francisco Javier
For decades, the pursuit of clean and sustainable electricity through nuclear fusion has stood as an elusive grail in humanity’s technological journey. We can not only witness this energy in our parent star, the Sun, but also feel it on our skin under its rays; yet replicating this complex phenomenon on Earth has always remained far beyond our grasp as a species. Today, experimental fusion devices such as ITER (International Thermonuclear Experimental Reactor) demonstrate that we are closer than ever to achieve this revolutionary breakthrough. This thesis shifts the focus beyond ITER towards DEMOnstration Power Plants (DEMO), conceptual reactors designed to prove in the future the feasibility of continuously delivering clean and safe net electricity to the grid. Among the main challenges involved in developing DEMO fusion reactors, the materials challenge is paramount. The subject matter of this work is the class of High Heat Flux (HHF) materials required to manage extreme heat loads in these devices. To date, ITER-Grade CuCrZr (IG-CuCrZr, 0.6-0.9 Cr – 0.07-0.15 Zr – Bal. Cu (wt.%)) is the baseline heat sink alloy, chosen for its combination of high thermal conductivity and relatively high mechanical strength, combined with good fracture toughness, availability, and relatively low cost. Achieving the optimal precipitate microstructure in CuCrZr, however, demands precise post‑processing, and elevated temperatures can quickly degrade its performance. The challenge intensifies during assembly, since high‑temperature joining methods such as welding, brazing or hot isostatic pressing (HIP), inevitably modify the optimised precipitate microstructure, thereby weakening the alloy’s mechanical and functional performance. Moreover, future DEMO reactors (and especially commercial fusion plants) will demand superior creep resistance, enhanced mechanical performance and robust behaviour under neutron irradiation. Under these conditions, IG‑CuCrZr is not expected to perform adequately: irradiation‑induced embrittlement below 275 °C, combined with long‑term creep requirements, further compromises its suitability. Various reinforcement strategies such as tungsten fibres or particles, and oxide‑dispersion‑strengthened (ODS) variants, are currently under investigation; however, this thesis takes Additive Manufacturing (AM) as a route by optimising advanced manufacturing processes with significant potential. Over the last decade, AM has established itself as an emerging manufacturing technology with great potential in metallic materials. AM enables the manufacture of net-shaped parts with highly intricate internal cooling structures, and has a great potential for reducing the number of joining processes that would otherwise degrade critical microstructures for the performance of the material. This is particularly relevant in nuclear fusion applications, where components not only present complex geometries but also require strict minimisation of welds and joints, especially those involving filler material. In this context, AM is not just advantageous: it may in fact be the only viable fabrication route for certain components. The approach taken in this thesis is to go beyond the geometric and manufacturing advantages of AM and explore its potential to enhance material properties. Rather than solely addressing design and assembly challenges, AM is here considered as a powerful tool to engineer improved microstructures directly during fabrication. In doing so, this work demonstrates that AM can deliver Cu alloys with superior mechanical and functional performance compared to those produced through conventional processing routes. In this thesis, the Powder Bed Fusion (PBF) AM technology has been employed, specifically the electron beam-based PBF (PBF-EB). Although this technique is less widespread than its laser-based (PBF-LB) counterparts, it is proposed here as the most suitable approach for processing Cu-based alloys for fusion applications, due to the limitations observed in PBF-LB. Issues such as excessive reflectivity, poor densification, and cracking have been consistently reported in laser-based fabrication of Cu-based materials. While near-full densification has indeed been achieved in recent studies, it has required highly optimised processing conditions and considerable effort in process development. In contrast, this work advocates for the use of the electron beam-based approach as a more appropriate route for processing Cu-based materials, particularly when high thermal conductivity, structural integrity, and microstructural control are simultaneously required. In addition, the use of PBF-EB offers several further advantages over laser-based techniques, particularly relevant for the material under investigation in this work. First, the highly vacuum environment required by an electron beam system is especially beneficial when processing powders with high oxygen affinity, such as copper. This reduces oxidation during fabrication and, consequently, minimises the formation of oxide-induced porosity. A second key advantage relates to the dominant strengthening mechanism in CuCrZr: precipitation strengthening. The intrinsic preheating applied in PBF-EB (via both electron beam pre-scanning and sustained heating of the build platform) promotes an in-situ ageing process during fabrication. This results in the direct formation of a precipitation-hardened microstructure in the as-built condition, without the need for subsequent post-processing ageing treatments. Therefore, this thesis constitutes a materials science investigation into the feasibility of the PBF-EB process for fabricating IG-CuCrZr heat sink material for nuclear fusion applications. To this end, key process parameters were systematically optimised to push final densification towards 100 %. An extensive parametric optimisation campaign was required to achieve this goal. The results obtained demonstrate that, while near-full densification and excellent microstructural quality can be reached, the process remains highly sensitive to parameter tuning and strongly dependent on the characteristics of the powder feedstock. This underlines the importance of tailoring both the powder morphology and the processing strategy to ensure consistent and reproducible results. During the optimisation campaign, it was demonstrated that employing relatively low and constant electron beam scanning speeds (on the order of a few hundred mm/s) led to the best densification results. Interestingly, this is not typical in standard PBF-EB builds, where scan speeds often vary across different regions of the part. The optimised parameter set achieved in this study falls within what can be described as a slightly overmelted regime, based on the spherical microporosity observed in the fabricated specimens and in comparison with previous reports in the literature. This parameter set promoted a consistent overlapping of melt pools and remelting of previously deposited layers throughout the entire height of the specimens. As a result, the resulting microstructure was strongly influenced by these repeated thermal cycles, which played a key role in shaping grain morphology and precipitation behaviour. Residual porosity is an inherent feature of AM and, as such, must be a central focus during process optimisation. It effectively becomes a screening criterion when assessing fabrication strategies. In this work, it has been demonstrated that the spherical and non-interconnected microporosity (and absent at the specimen surface) can be effectively removed through HIP, resulting in an average relative density level of 99.5%. While this is a very good value, it still indicates some room for further improvement. As expected, the remaining porosity has a measurable impact on thermal conductivity. However, experimental measurements conducted in this work fall within the typical variability range reported in the literature for IG-CuCrZr, namely between 320 and 380 W/m·K. These measurements were performed up to 400 °C, thus also confirming the thermal stability of the material within the operating range relevant to fusion applications. This confirms that the material, even in its current state of development, meets the thermal performance requirements for its intended application as a HHF material in nuclear fusion reactors. Additive processes like PBF inherently generate extreme thermal gradients and very rapid solidification rates, producing non‑equilibrium, hierarchical microstructures that span several orders of magnitude in scale and demand exhaustive multiscale characterisation. While this is a general feature of PBF technologies, it becomes particularly relevant in PBF-EB due to the sustained preheating applied during processing and the formation of nanoscale precipitates directly in the as-built material. In this work, macro‑ and mesoscale features were first examined by optical microscopy (OM). Field‑Emission Scanning Electron Microscopy (FE-SEM) combined with Energy‑Dispersive X‑ray Sspectroscopy (EDS) then provided detailed insights into microscale characteristics, including the distribution and chemistry of precipitates. At the finest scale, Scanning/Transmission Electron Microscopy (S/TEM) resolved nanoscale features such as precipitates and dislocation networks formed during PBF‑EB. Finally, Electron Backscattered Diffraction (EBSD) was used to assess the crystallographic texture induced by fabrication, and orientation data were post-processed using the Bishop-Hill framework to compute the material’s Taylor factor. This level of detailed characterisation is essential to understand the underlying mechanisms and dynamics that govern microstructure formation during fabrication. In this sense, the present work goes beyond validating the properties of the material obtained: it highlights how both processing parameters and post‑treatments can be used as active tools to tailor microstructures on demand for specific functional and mechanical requirements. AM is inherently anisotropic due to its layer-by-layer nature. Rather than being seen as a limitation, this anisotropy offers significant potential for designing processing strategies that promote the formation of substructures not typically accessible via conventional manufacturing methods. This opens the door to a new paradigm in which material properties can be engineered during fabrication through deliberate control of thermal histories and solidification paths. The microstructural results obtained in this work provide compelling examples of tailored features achieved through process design. Elongated grains aligned along the build direction (BD) were observed, as expected in PBF processes. Interestingly, the combination of scan strategy and process parameters used in this study resulted in the development of corrugated grain boundaries, a microstructural feature with proven potential to enhance creep resistance by suppressing grain boundary sliding. This is particularly relevant for HHF components. At a finer scale, subgrains developed a cellular-like arrangement, with dislocation-rich cell walls. Such features have previously been linked to increased mechanical strength without compromising ductility, providing an intrinsic microstructural advantage. Regarding precipitation, the as-built material already exhibited a refined distribution of strengthening precipitates (commonly known as Guinier-Preston zones), comparable in size and density to those reported in conventionally processed IG-CuCrZr. The average precipitate size was measured at ∼4.5 nm; however, a substantial population of larger precipitates in the 10-15 nm range was also identified. These larger precipitates are known to promote dislocation looping via the Orowan mechanism, which has been proposed as a promising strategy to mitigate irradiation-induced embrittlement. Therefore, this represents another tailored microstructural feature, specifically relevant for fusion environments. Finally, the presence of coarser precipitates located at grain and subgrain boundaries was also confirmed. Such a distribution plays a key role in enhancing creep resistance by reducing grain boundary sliding during prolonged thermal exposure, providing yet another example of process-driven tailoring for targeted performance. The crystallographic texture developed was also characterised and the results revealed a fibre-type texture with <110> orientations preferentially aligned along BD, consistent with the epitaxial growth typically observed under steep thermal gradients. No cylindrical symmetry around BD was detected, confirming the presence of an inclined fibre texture. Pole figure analysis further enabled the identification and quantification of specific components within this fibre texture. Their evolution was monitored through post-processing thermal treatments of varying durations. The results showed that the dominant <110> || BD texture progressively transitioned into a <100> || BD orientation, with other components emerging depending on the thermal exposure. This transition has significant implications for the mechanical behaviour of the material. To assess such implications, a novel methodology was developed in this thesis combining conventional texture analysis (such as pole figure and data orientation analysis) with Taylor factor computation based on the Bishop-Hill framework, as previously introduced. While grounded in established mathematical theories and models, its application to IG‑CuCrZr produced by PBF‑EB represents an original contribution, offering a new approach for quantifying crystallographic texture effects in additively manufactured materials. The results confirmed an initially anisotropic response, with high Taylor factors along BD averaging 3.34, compared to the 3.05 value obtained along the transverse direction. Notably, this transverse direction was aligned with the loading axis in the tensile tests. However, thermal treatments – particularly long-term (2 months) exposure at 375 °C – promoted a convergence of the Taylor factor values along BD and the transverse direction, both stabilising around ∼2.7. This trend towards mechanical isotropy is highly desirable for structural reliability in fusion components. Beyond its direct relevance to the alloy and process studied, this methodology can be extended to other materials and manufacturing routes, offering a powerful tool for designing and tailoring anisotropy in advanced structural materials. Mechanical performance was evaluated through standard uniaxial tensile tests, miniaturised Charpy V‑notch impact tests for toughness, and Vickers microhardness measurements across different annealing conditions. These techniques are routinely employed for the qualification of structural materials and are therefore essential for assessing their suitability in demanding environments. Altogether, they provide a clear and quantitative understanding of how individual PBF‑EB parameters influence energy absorption, microstructural evolution and the mechanical behaviour of IG‑CuCrZr heat‑sink material. The mechanical response obtained in this work was found to be comparable to, and in some cases even superior to, values reported in the literature for conventionally manufactured IG‑CuCrZr. These results support the initial hypothesis that not only can AM match the performance of traditional processing routes, but it also holds potential to enhance it. A comparison with recent studies on PBF-LB highlights a key distinction: in PBF-LB, the as-built microstructure tends to be a supersaturated solid solution due to the absence of powder preheating, resulting in poor mechanical performance unless a direct age-hardening (DAH) treatment is subsequently applied. Although such post-processing does lead to improved strength values (sometimes even exceeding those reported in this work) it reinforces the need for a dedicated ageing step in PBF-LB. In contrast, the preheating strategy inherent to PBF‑EB enables in-situ precipitation during fabrication, producing a strengthened microstructure directly in the as-built condition. Hardness measurements revealed values consistently above the minimum recommended for IG‑CuCrZr components in ITER applications (126 HV), as well as above the typical range reported in the literature for conventionally processed material (120-140 HV). After HIP treatment, values between 157 and 174 HV were obtained across the various conditions evaluated. These high hardness values provide indirect evidence of the well-developed precipitation microstructure present in the material, although it is important to note that hardness is not governed exclusively by precipitation. Nevertheless, its sensitivity to microstructural features and the simplicity of the test makes hardness a valuable screening tool for rapid assessment of fabrication and heat treatment quality. In terms of toughness, miniaturised Charpy impact tests confirmed a good energy absorption capacity across all specimens. However, when compared to the upper range of values reported in the literature, the results suggest some room for improvement, likely linked to the residual ∼0.5% microporosity observed in the samples. Beyond the core findings, this work also confirms and substantiates several relevant aspects regarding composition and processing that are critical for future developments. First, it has been demonstrated that a slight increase in Cr content beyond the upper limit defined for IG-CuCrZr does not lead to undesirable precipitate coarsening, suggesting a potential margin for mechanical performance enhancement without compromising thermal stability. Second, Zr has been found to have a particularly strong influence on mechanical strength. Based on the observed trends, this thesis advocates for a refined definition of allowable alloying element content (particularly Zr) within the current specification, to better align compositional choices with target performance requirements. Finally, the importance of minimising oxygen contamination throughout the entire fabrication chain was clearly confirmed. Although difficult to control, even modest increases in oxygen content were shown to impact densification and microstructural integrity, reaffirming the need for stringent powder handling and atmosphere control practices in AM of Cu-based alloys. These results establish a solid foundation for the qualification of PBF‑EB materials in nuclear fusion systems and point towards future pathways for performance enhancement through alloy and process design., Durante décadas, la búsqueda de una fuente de electricidad limpia y sostenible a través de la fusión nuclear ha sido un objetivo esquivo en el camino tecnológico de la humanidad. Sentimos esta energía de nuestra estrella madre directamente en nuestra piel, bajo sus rayos; sin embargo, replicar este complejo fenómeno en la Tierra siempre ha estado fuera de nuestro alcance como especie. Hoy en día, dispositivos experimentales como ITER (Reactor Experimental Termonuclear Internacional) demuestran que estamos más cerca que nunca de lograr este avance revolucionario. Esta tesis dirige el foco más allá de ITER, hacia las futuras plantas de demostración (DEMO), reactores conceptuales diseñados para probar la viabilidad de suministrar de forma continua electricidad limpia y segura a la red. Entre los principales desafíos para el desarrollo de reactores de fusión tipo DEMO, el reto relacionado con los materiales es fundamental. El tema central de este trabajo se centra en los materiales sometidos a flujos térmicos intensos (High Heat Flux, HHF), necesarios para gestionar las elevadas cargas térmicas en estos dispositivos. Hasta la fecha, el CuCrZr grado ITER (IG-CuCrZr, 0.6–0.9 Cr – 0.07–0.15 Zr – resto Cu en %p) se considera la aleación base para disipadores térmicos, seleccionada por su combinación de alta conductividad térmica y resistencia mecánica relativamente elevada, junto con una buena tenacidad a fractura, disponibilidad y bajo coste. Sin embargo, lograr la microestructura óptima de precipitados en CuCrZr requiere tratamientos de post-procesado muy precisos, y las altas temperaturas pueden degradar rápidamente su rendimiento. Este reto se intensifica durante el ensamblaje, ya que los métodos de unión a alta temperatura como la soldadura, el brazing o el prensado isostático en caliente (HIP) modifican inevitablemente la microestructura optimizada, debilitando así el rendimiento mecánico y funcional de la aleación. Además, los futuros reactores DEMO (y especialmente las plantas comerciales) exigirán una resistencia al creep superior, mejor comportamiento mecánico y robustez frente a la irradiación neutrónica. En estas condiciones, no se espera que IG-CuCrZr rinda adecuadamente: la fragilización inducida por irradiación por debajo de 275 °C, junto con los requisitos de resistencia al creep a largo plazo, comprometen aún más su idoneidad. Si bien se están investigando estrategias de refuerzo como fibras o partículas de tungsteno y variantes reforzadas por dispersión de óxidos (ODS), esta tesis adopta la Fabricación Aditiva (Additive Manufacturing, AM) como vía alternativa mediante la optimización de procesos avanzados con alto potencial. Durante la última década, la AM se ha consolidado como una tecnología emergente con gran potencial en la fabricación de materiales metálicos. Permite la producción de piezas con geometrías finales e intrincadas estructuras internas de refrigeración, y tiene un enorme potencial para reducir el número de uniones que, de otro modo, degradarían microestructuras críticas. Esto resulta particularmente relevante en aplicaciones de fusión nuclear, donde los componentes no solo presentan geometrías complejas, sino que además requieren una estricta minimización de uniones, especialmente aquellas con material de aporte. En este contexto, AM no solo es ventajosa, sino que podría ser la única vía viable de fabricación para ciertos componentes. El enfoque de esta tesis va más allá de las ventajas geométricas y de fabricación, explorando el potencial de la AM para mejorar directamente las propiedades del material. En lugar de limitarse a abordar los desafíos de diseño y ensamblaje, aquí se considera la AM como una herramienta poderosa para diseñar microestructuras mejoradas directamente durante la fabricación. Así, se demuestra que la AM puede producir aleaciones de Cu con propiedades mecánicas y funcionales superiores a las obtenidas por rutas convencionales. En esta tesis se emplea la tecnología de AM por fusión en lecho de polvo (Powder Bed Fusion, PBF), concretamente la variante basada en haz de electrones (PBF-EB). Aunque esta técnica es menos común que su contraparte láser (PBF-LB), se propone aquí como la más adecuada para procesar aleaciones base cobre en aplicaciones de fusión, dadas las limitaciones observadas en PBF-LB. Problemas como alta reflectividad, baja densificación y agrietamiento son frecuentes en la fabricación láser de materiales base Cu. Aunque en estudios recientes se ha alcanzado una densificación casi completa, ha sido necesario un desarrollo de proceso muy optimizado. En cambio, este trabajo aboga por el uso de PBF-EB como una ruta más adecuada, especialmente cuando se requiere alta conductividad térmica, integridad estructural y control microestructural. Además, el uso de PBF-EB presenta ventajas adicionales especialmente relevantes para el material estudiado. Primero, las condiciones de alto vacío que requiere el sistema de haz de electrones es beneficioso al procesar polvos con alta afinidad por el oxígeno, como el cobre. Esto reduce la oxidación durante la fabricación y minimiza la formación de porosidad inducida por óxidos. En segundo lugar, el mecanismo de refuerzo dominante en CuCrZr es el endurecimiento por precipitación. El precalentamiento intrínseco en PBF-EB (por escaneado previo del haz y calefacción sostenida de la base) promueve un envejecimiento in situ durante la fabricación. Esto da lugar a una microestructura endurecida por precipitación directamente en la condición as-built, sin necesidad de tratamientos de envejecimiento posteriores. Por tanto, esta tesis constituye una investigación en ciencia de materiales sobre la viabilidad del proceso PBF-EB para fabricar CuCrZr de grado ITER como material disipador de calor en aplicaciones nucleares. Para ello, se optimizaron sistemáticamente los parámetros clave del proceso para alcanzar una densificación cercana al 100 %. Esto requirió una extensa campaña de optimización paramétrica. Los resultados muestran que, aunque se puede alcanzar una densificación casi total con buena calidad microestructural, el proceso sigue siendo muy sensible al ajuste fino de parámetros y fuertemente dependiente de las características del polvo de partida. Esto subraya la importancia de adaptar tanto la morfología del polvo como la estrategia de procesado para garantizar resultados reproducibles y consistentes. Durante la optimización, se demostró que el uso de velocidades de escaneado del haz relativamente bajas y constantes (del orden de unos cientos de mm/s) condujo a los mejores resultados de densificación. Esto no es habitual en construcciones estándar por PBF-EB, donde las velocidades suelen variar según la zona. El conjunto de parámetros optimizado en este estudio se sitúa en un régimen ligeramente sobrefundido, según la microporosidad esférica observada y en comparación con estudios previos. Este conjunto favoreció una superposición coherente de las melt pools y la fusión repetida de capas previas, influyendo fuertemente en la morfología de grano y en la precipitación. La porosidad residual es una característica inherente a la AM, y por tanto debe abordarse como un criterio de evaluación central. En este trabajo, se ha demostrado que la microporosidad esférica, no conectada y ausente en la superficie puede eliminarse eficazmente mediante HIP, alcanzando una densidad relativa media del 99,5 %. Aunque es un valor excelente, aún deja cierto margen de mejora. Como era de esperar, la porosidad restante afecta a la conductividad térmica. Sin embargo, las medidas experimentales se sitúan dentro del rango típico reportado para IG-CuCrZr (320-380 W/m·K). Estas medidas, realizadas hasta 400 °C, confirman la estabilidad térmica del material en el rango operativo relevante, cumpliendo con los requisitos funcionales como material HHF para reactores de fusión nuclear. Procesos aditivos como PBF generan gradientes térmicos extremos y velocidades de solidificación muy elevadas, dando lugar a microestructuras jerárquicas fuera de equilibrio que requieren una caracterización multiescala exhaustiva. Esto es especialmente relevante en PBF-EB debido al precalentamiento sostenido y la formación directa de precipitados nanoscópicos. En este trabajo, las características macro y mesoscópicas se analizaron mediante microscopía óptica, las características microscópicas mediante FE-SEM con EDS, y las nanoscópicas mediante S/TEM. Además, se caracterizó la textura cristalográfica con EBSD y se calcularon los factores de Taylor con el marco de Bishop-Hill. Este nivel de caracterización permite comprender los mecanismos que gobiernan la formación microestructural. Más allá de validar las propiedades del material, este trabajo demuestra cómo los parámetros de fabricación y tratamientos térmicos permiten ajustar microestructuras a medida para requisitos funcionales y mecánicos específicos. La AM es inherentemente anisotrópica debido a su naturaleza capa por capa, y el mismo proceso puede ser aprovechado para inducir subestructuras no accesibles por métodos convencionales, inaugurando un nuevo paradigma en el diseño de materiales. Los resultados microestructurales de este trabajo muestran características ajustadas mediante el diseño del proceso. Se observaron granos elongados alineados con la dirección de construcción (BD) y bordes de grano corrugados, que podrían mejorar la resistencia al creep al suprimir el deslizamiento intergranular. A escala más fina, los subgranos desarrollaron estructuras celulares ricas en dislocaciones. En cuanto a los precipitados, se observaron zonas Guinier-Preston de tamaño y densidad comparables a las obtenidas por procesamiento convencional, con precipitados de ∼4,5 nm y una fracción significativa en el rango 10-15 nm (relevantes para endurecimiento Orowan). También se identificaron precipitados gruesos en bordes de grano y subgrano, lo cual favorece la resistencia al creep. La textura cristalográfica desarrollada fue de tipo fibra con orientaciones <110> alineadas con BD, sin simetría cilíndrica e inclinada un cierto ángulo. El análisis de figuras de polos permitió identificar y cuantificar componentes específicos, cuyo comportamiento ante tratamientos térmicos se estudió. Se observó una transición de <110> || BD a <100> || BD, con implicaciones mecánicas relevantes. Para evaluar estos efectos, se desarrolló una metodología que combina análisis convencional de textura con el cálculo del factor de Taylor usando el marco Bishop-Hill. Su aplicación a CuCrZr procesado por PBF-EB representa una contribución original. Inicialmente se observaron factores de Taylor más altos en BD (3.34) frente a la dirección transversal (3.05), pero tras tratamiento térmico prolongado a 375 °C, ambos convergieron hacia ∼2.7, indicando una tendencia hacia la isotropía mecánica. Las propiedades mecánicas se evaluaron mediante ensayos de tracción, impacto Charpy miniaturizado y microdureza Vickers. Estos ensayos demostraron un comportamiento comparable, e incluso superior, al de CuCrZr convencional. La comparación con PBF-LB mostró que, en ese caso, el envejecimiento post-proceso es esencial para obtener buen rendimiento, mientras que en PBF-EB se consigue directamente en estado as-built gracias al precalentamiento. Las durezas obtenidas fueron consistentemente superiores al mínimo requerido para componentes de ITER (126 HV), alcanzando entre 157 y 174 HV tras HIP. Las pruebas de impacto indicaron buena tenacidad, aunque ligeramente inferior a los valores máximos reportados, probablemente por la microporosidad residual del 0,5 %. Finalmente, este trabajo confirma varios aspectos clave para desarrollos futuros. Se ha demostrado que un ligero aumento en el contenido de Cr no conlleva engrosamiento de precipitados, abriendo margen de mejora mecánica. También se ha constatado que el Zr influye fuertemente en la resistencia, proponiendo un ajuste más fino en las especificaciones actuales. Por último, se ha confirmado la importancia crítica de minimizar el oxígeno a lo largo de toda la cadena de fabricación. Incluso incrementos moderados impactan negativamente en la densificación y la integridad microestructural, subrayando la necesidad de un control atmosférico riguroso en la AM de aleaciones base Cu. Estos resultados sientan una base sólida para la cualificación de materiales PBF-EB en sistemas de fusión nuclear y apuntan hacia futuras estrategias de mejora mediante diseño de aleación y proceso., 1. Funding Entity: Strategic Projects Oriented towards Ecological Transition and Digital Transition (State Research Plan 2021-2023, Ministry of Science and Innovation), Reference: TED2021-129825A-I00.- 2. Funding Entity: Ministry of Science and Innovation (R&D Challenges Projects 2019), Reference: PID2019-105325RB-C31. - 3. Funding Entity: Community of Madrid. R&D Technologies Program Call 2018, Reference: S2018/EMT-4437. - 4. Title: Additive Manufacturing of CuCrZr - Characterization, Subprojects (WP) under GRANT 101052200 “EUROFUSION”, FP9. - 5. Funding Entity: CDTI/AEI, Call Transmisiones 2024, Reference: MIG-20242038/PLEC2024-011150., Programa de Doctorado en Ciencia e Ingeniería de Materiales por la Universidad Carlos III de Madrid, Presidenta: Marta Serrano García.- Secretaria: Carmen María Cepeda Jiménez.- Vocal: Gerald Pintsuk
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Analysis of the linear and nonlinear stability of Alfven eigenmodes and fish-bones in JET DT discharges: mode identification and shear flows generation

  • Varela Rodríguez, Jacobo
  • García, J.
  • Mazzi, S.
  • Kazakov, Y.
  • Stancar, Z.
  • Baruzzo, M.
  • Ongena, J.
  • Spong, D. A.
  • García Gonzalo, Luis
  • Ghai, Y.
  • Zarzoso, D.
  • Ortiz Luengo, Juan
  • Poradzinski, M.
  • Sharapov, S.
  • Fitzgerald, M.
  • Breizman, B.
  • Waelbroeck, F.
  • Menmuir, S.
  • Sun, H. J.
  • Kos, D.
  • Boboc, A.
  • Hawkes, N. C.
The plasma in future nuclear fusion reactors will be heated by neutral beam injectors (NBIs) and high frequency electromagnetic waves as well as fusion born alpha particles. Energetic particles (EPs), with energies up to two orders of magnitude larger than the thermal plasma, can trigger EP driven modes and induce harmful EP losses, reducing the plasma heating efficiency and the economical viability of the reactor. The present study is dedicated to analyze the Alfven Eigenmode (AE) activity in JET D–T discharges, the closest experiment to reactor-like operation performed until now. There, EP driven modes are induced by the combined effect of tangential NBIs and ion cyclotron resonance heating (ICRH) driven EP. Linear and nonlinear simulations are performed with the gyro-fluid FAR3d code to analyze the AE activity observed in the discharge 99896. The linear simulations reproduce the unstable n = 3 to 5 toroidal AEs (TAE) at the inner plasma region observed in the experiment, triggered by highly energetic passing deuterium populations injected by the tangential NBIs, further accelerated by the effect of the ICRH up to 1 MeV. In addition, fish-bones triggered by energetic trapped hydrogen induced by the ICRH are also reproduced. On the other hand, the alpha particles density is too small to destabilize AEs in the experiment. Nonetheless, increasing artificially the alpha density by one order of magnitude, an n = 1 beta induced AE can be destabilized in the inner plasma region. Nonlinear simulations indicate the generation of zonal structures during the AE/fish-bone saturation phase. TAE and fish-bones causes a rather weak increase of the passing D and trapped H EP (around 2%), respectively. Shear flows and zonal currents are generated during the saturation of TAE and fish-bones. Nonlinear simulations performed for D–T and pure deuterium thermal plasma indicate AE/fish-bone activity is weaker and shear flows are less intense in the pure deuterium case, trends consistent with the experimental observations that also indicates a deterioration of the thermal plasma confinement. Therefore, both numerical studies and experimental evidence indicate the generation of shear flows by AE/fish-bones could be connected with an improvement of the thermal plasma confinement., The authors would like to thank the JET technical staff for their contributions in the operation and maintenance of JET. We also thanks Alex Tinguely for very productive discussions about TAE-EAE damping rates in JET plasma. This work was supported by the EUROfusion Project CfP-FSD-AWP23-TE-04-JET, the US DOE under Grant DE-FG02-04ER54742, Comunidad de Madrid under the Project 2019-T1/AMB-13648 and the Spanish National Research Project No. PID2022-137869OB-I00. Data available on request from the authors. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200–EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. Use has been made of Uranus, a supercomputed cluster located at the Universidad Carlos III de Madrid (Spain) and funded jointly by EU FEDER funds and by the Spanish Government via national Projects UNC313-4E-23612, ENE2009-12213-C03-03, ENE2012-33219, ENE2012-31753 and ENE2015-68265.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Experimental study of the isotope effect of the permeability in structural steels for fusion reactors: Eurofer and SS316

  • Urrestizala de Andrés, María
  • Azkurreta, Jon
  • Alegría Gutiérrez, Natalia
  • Peñalva Bengoa, Igor
  • Malo, Marta
  • Moreno Tejero, Carlos
  • Rapisarda, David
The transport of hydrogen isotopes through the elements that make up a fusion reactor, and their corresponding interaction with these materials, have a direct impact on its operation. Consequently, it is essential to master in advance their transport parameters in the different materials proposed to constitute the elements that will compound the fusion reactors, and, consequently, this is one of the main lines of fusion investigation. For reasons of technology, safety and viability, it would be desirable to have the possibility of experimenting only with protium and, from these values, to extrapolate those of deuterium and, above all, tritium. To do so, the classical atomic theory establishes that the ratio of these parameters is inversely proportional to square root of their mass ratio. However, discrepancies have been detected, so its verification has become fundamental. For this reason, this study presents the analysis of a series of tests of permeability carried out at the Fusion Materials Laboratory (UPV/EHU) using protium and deuterium with some samples of SS316 and EUROFER steels, in order to contrast the isotope effect, as well as the variables that could influence its adjustment. The results show that 316 steels present an isotope effect much closer to the theoretical one, while EUROFER steels differ more, increasing their isotopic ratio of permeabilities with temperature. In both cases, the trends are in line with published results., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Experimental determination of the solubility of hydrogen in a quality certified eutectic PbLi alloy

  • Peñalva Bengoa, Igor
  • Urrestizala de Andrés, María
  • Azkurreta, Jon
  • Alegría Gutiérrez, Natalia
  • Malo, Marta
  • Garcinuño, Belit
  • Patiño, Julián
  • Rapisarda, David
The efficient operation of the liquid breeding blankets relies on the correct definition of the transport parameters of protium, deuterium and tritium in PbLi liquid metals with an eutectic composition. This is the case of the DCLL blanket or the WCLL, where the solubility and diffusivity values will affect to the induced tritium flux in terms of magnitude and kinetics. However, there exists a huge band in the literature for the results obtained experimentally for the solubility of the isotopes in the mentioned liquid metal alloy, which is unacceptable from the designing point of view. Moreover, the exact content of lithium and the impurities that the PbLi alloy may contain seems to be another key issue that needs to be faced. This work shows the preliminary results obtained in a new measurement campaign carried out with samples of PbLi qualified in terms of impurities and lithium content. These samples have been tested in the Absorption-Desorption facility of the UPV/EHU that has been recently repaired and upgraded as part of EUROfusion program in collaboration with CIEMAT., his work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards a standardised methodology of radiation damage defect distributions for microstructure evolution models

  • Gutiérrez Camacho, Abel Carlos
  • Caturla, Maria J.
  • Sand, Andrea E.
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
  • Gutiérrez Camacho, Abel Carlos|||/items/2712ce55-c624-47a2-8e32-c969884ade13
We have developed a model that integrates molecular dynamics (MD) and binary collision approximation (BCA) results to reconstruct the irradiation damage caused by ions of any energy in different materials. The methodology is designed as a standardized tool for introducing defects into microstructure evolution models, such as object kinetic Monte Carlo or cluster dynamics. Our approach combines primary knock-on atom (PKA) energy and position data from the BCA code SRIM with the CascadesDB database of MD cascade debris. For energies below the database energy limit, the fer-arc-dpa model (Yang, 2021) is employed to estimate Frenkel pair production; and for energies above it, SRIM is run iteratively. The code also incorporates methods for defect and cluster identification, facilitating detailed analysis of the MD database and the reconstructed damage. We demonstrate its application by comparing defect production to displacement per atom models and analysing cluster distributions for self-ion irradiation at 1 and 5 MeV in Fe and W. While focused on ion irradiation, the framework is adaptable to neutron irradiation, provided that the PKA data are available; and it can be extended to other MD databases or BCA codes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of initial damage distribution and sinks in fusion materials: A parametric OKMC study of W vs Fe

  • Wu, Jintong
  • Balbuena, Juan Pablo
  • Jantunen, Ville
  • Caturla, Maria J.
  • Granberg, Fredric
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
Irradiation present in nuclear test reactors and power plants is known to alter the properties of structural materials. Using long-timescale Object Kinetic Monte Carlo simulations, we systematically investigated the influence of different parameters and temperature on the microstructural evolution of tungsten and iron under irradiation. Our results indicate that in tungsten, the inclusion of spherical absorbers is essential for achieving realistic vacancy saturation levels by limiting the recombination between highly mobile interstitials and vacancies. At elevated temperatures, using cascade-shaped insertion enhances local vacancy clustering, leading to a larger number of smaller vacancy clusters compared to random insertion. In contrast, for iron, the absence of spherical absorbers facilitates the growth of immobile C15 clusters and subsequent formation of (100) loops, markedly altering the defect distribution even at room temperature. Additionally, while the dose rate effect is negligible at room temperature in tungsten due to the immobile vacancies and the very fast migration of interstitials, longer relaxation times between cascades at higher temperatures promote the development of larger vacancy clusters. These insights are crucial for realistic parameterization of Kinetic Monte Carlo models and contribute to a deeper understanding of the irradiation effects in materials used in nuclear applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unveiling long-term defect evolution in fusion materials: a dynamic coupling of Molecular Dynamics with Object Kinetic Monte Carlo for iron and tungsten

  • Wu, Jintong
  • Hu, Zhiwei
  • Balbuena, Juan Pablo
  • Yang, Qigui
  • Barthe, Marie-France
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
  • Granberg, Fredric
Exposure of materials to radiation in nuclear test reactors and power plants can strongly modify the microstructure and long-term performance of structural parts. Although the primary damage event develops within pico- to nanosecond time scales, its consequences can govern defect evolution over experimentally relevant irradiation periods. Classical molecular dynamics can resolve collision cascades with atomistic detail, but its accessible time scale leads to dose rates that are far above experimental conditions. Object kinetic Monte Carlo can reach much longer time scales, but it usually represents irradiation damage through simplified defect insertion rules and therefore neglect important information on cascade morphology and cascade interaction with existing defects.&#xD;&#xD;In this work, we present a method that embeds complete molecular dynamics cascade simulations directly into object kinetic Monte Carlo, allowing irradiation to be followed at realistic dose rates while retaining the atomistic character of cascade overlap. The approach is applied to tungsten and iron, two key materials for nuclear environments. We show that explicit cascade treatment changes both the total defect populations and the resulting cluster size distributions. In tungsten, cascades enhance vacancy clustering at low temperature, whereas at elevated temperature they can also destroy and divide pre-existing voids. In iron, cascades produce a clear reduction in the size of C15 Laves-phase clusters and lead to clustering behavior that is not captured by conventional object kinetic Monte Carlo, even at room temperature. These results demonstrate that cascade overlap can introduce mechanisms that are absent from standard long time scale models, and that such mechanisms should be included as they control the microstructure evolution during irradiation.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Quantitative comparison of impurity transport in turbulence reduced and enhanced scenarios at Wendelstein 7-X

  • Alcusón, J.A.
  • Wegner, Th.
  • Dinklage, A.
  • Langenberg, A.
  • Bähner, J.P.
  • Buttenschön, B.
  • Edlund, E.M.
  • Fuchert, G.
  • García-Regaña, J.M.
  • Grulke, O.
  • Huang, Z.
  • Porkolab, M.
  • Stechow, A.V.
  • Zocco, A.
We assess the turbulent particle transport being responsible for the limitation of the confinement and, thus, the overall performance of the neoclassically optimized stellarator Wendelstein 7-X. The radial particle transport is experimentally inferred from the evaluation of impurity injection into turbulence reduced and enhanced plasma scenarios revealing a completely different confinement behavior. The impact of the density gradient on the turbulent ion transport is theoretically estimated using large-scale non-linear gyro-kinetic simulations enabling, for the first time in Wendelstein 7-X, a quantitative comparison to the experimentally assessed impurity transport properties. We demonstrate that impurity transport in most of the Wendelstein 7-X discharges, up to now impossible to cover only with neoclassical estimations, is dominated by turbulence and can be modelled via gyro-kinetic simulations.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Overview of the first Wendelstein 7-X long pulse campaign with fully water-cooled plasma facing components

  • Alcusón, J.A.
After a long device enhancement phase, scientific operation resumed in 2022. The main new device components are the water cooling of all plasma facing components and the new water-cooled high heat flux divertor units. Water cooling allowed for the first long-pulse operation campaign. A maximum discharge length of 8 min was achieved with a total heating energy of 1.3 GJ. Safe divertor operation was demonstrated in attached and detached mode. Stable detachment is readily achieved in some magnetic configurations but requires impurity seeding in configurations with small magnetic pitch angle within the edge islands. Progress was made in the characterization of transport mechanisms across edge magnetic islands: Measurement of the potential distribution and flow pattern reveals that the islands are associated with a strong poloidal drift, which leads to rapid convection of energy and particles from the last closed flux surface into the scrape-off layer. Using the upgraded plasma heating systems, advanced heating scenarios were developed, which provide improved energy confinement comparable to the scenario, in which the record triple product for stellarators was achieved in the previous operation campaign. However, a magnetic configuration-dependent critical heating power limit of the electron cyclotron resonance heating was observed. Exceeding the respective power limit leads to a degradation of the confinement.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Observation of impurity accumulation and its compatibility with high plasma performance in W7-X

  • Zhang, D.
  • Buttenschön, B.
  • Jablonski, S.
  • Kubkowska, M.
  • Ford, O.
  • Alcusón, J.A.
  • Beidler, C.D.
  • Burhenn, R.
  • Beurskens, M.N.A.
  • Langenberg, A.
  • Pablant, N.
  • Reimold, F.
  • Rahbarnia, K.
  • Smith, H.M.
  • Wegner, Th.
  • Wurden, G.
  • Bozhenkov, S.A.
  • Feng, Y.
  • Brunner, K.J.
  • Fuchert, G.
  • Gao, Y.
  • Geiger, J.
  • Giannone, L.
  • Höfel, U.
  • Hirsch, M.
  • Huang, Z.
  • Knauer, J.
  • Kremeyer, T.
  • Krychowiak, M
  • Kwak, S.
  • Laqua, H.P.
  • Laube, R.
  • Neuner, U.
  • Pasch, E.
  • Pavone, A.
  • von Stechow, A.
  • Svensson, J.
  • Thomsen, H.
  • W7-X Team
  • W7-X Team
At the W7-X stellarator, the bolometer system has measured an intensive radiation zone in the inner plasma region (at a normalized radius ρ ∼ 0.3–0.4) in the hydrogen plasma generated by electron cyclotron resonance heating; it differs from the normal plasma radiation distribution with an edge-localized emission zone. Spectroscopic diagnostics have recorded high-Z elements such as iron. This phenomenon happens in the plasma phases after gas supply turn-off, which results in all impurity relevant diagnostic signals increasing for several seconds. Despite the enhancement of the core radiation, the plasma energy confinement is improved. A transport analysis shows that this impurity radiation behavior is associated with a low diffusion coefficient (D ∼ 0.02 m2 s−1) and a reversal of the convection around the radial position of the emission peak, which, under normal conditions, separates the zones of outward convection in the central (|V| ∼ 0.1 m s−1) and inward convection in the outer region (|V| ∼ 0.3 m s−1). An impurity accumulation around this radial position has been identified. The transport coefficients obtained are comparable with the theoretical predictions of collisional impurity transport. In the plasma phases studied, both impurity and energy confinement are enhanced. The mechanism responsible for the improvement is believed to be a reduction of micro-instabilities associated with the observed steepening of the density profile, initiated by a low edge plasma density (<1.0 × 1019 m−3) after switching off the gas fueling. The normalized temperature and density gradients fulfil the condition for the suppression of ITG turbulence.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

The universal instability in optimized stellarators

  • Costello, P.
  • Proll, J.H.E.
  • Plunk, G.G.
  • Pueschel, M.J.
  • Alcusón, J.A.
In tokamaks and neoclassically optimised stellarators, like Wendelstein 7-X (W7-X) and the Helically Symmetric Experiment, turbulent transport is expected to be the dominant transport mechanism. Among the electrostatic instabilities that drive turbulence, the trapped-electron mode (TEM) has been shown both analytically and in simulations to be absent over large ranges of parameter space in quasi-isodynamic stellarator configurations with the maximum-J property. It has been proposed that the reduction of the linear TEM growth rate in such configurations may lead to the passing-electron-driven universal instability, which is often subdominant to the TEM, becoming the fastest-growing instability over some range of parameter space. Here, we show through gyrokinetic simulations using the GENE code, that the universal instability is dominant in a variety of stellarator geometries over a range of parameter space typically occupied by the TEM, but most consequentially in devices which possess beneficial TEM stability properties like W7-X, which locally satisfies the maximum-J property for deeply trapped particles in the regions of worst curvature. We find that the universal instability exists at long perpendicular wavelengths and, as a result, dominates the potential fluctuation amplitude in nonlinear simulations. In W7-X, universal modes are found to differ in parallel mode structure from trapped-particle modes, which may impact turbulence localisation in experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parametrization of embedded-atom method potential for liquid lithium and lead-lithium eutectic alloy

  • Al-Awad, Abdulrahman S.
  • Batet, Lluis
  • Sedano, Luis
Liquid lead-lithium eutectic remains as a promising candidate for various breeding-blanket designs in future nuclear-fusion technologies. The lack of a generalized theory of interatomic forces in the liquid state is reflected on the wide variety of proposed functional forms to describe interatomic interactions even in simple liquids. Computer simulations facilitate the study of liquid metal properties, due to mathematical and experimental challenges. A classical-MD EAM potential is parametrized using mechanical and non-mechanical (melting-point) properties to minimize the arbitrariness of functional forms, where the employed pair potential stems from the liquid-state theory to avoid the issue of the uniqueness of the potential. Enhanced performance is obtained for liquid density, energy, structure, diffusivity and shear viscosity of Li, and their temperature-dependencies. In a similar manner, reference experimental and ab initio MD data are used to parametrize a functional to describe Pb-Li pairwise interactions in liquid Pb-Li alloy, which is used with the derived EAM of liquid Li and a reference EAM of liquid Pb to investigate properties of liquid Pb-Li alloy. Enhanced transferability characteristics are obtained for low-in-lithium liquid Pb-Li melts, where Coulombic interactions are negligible. In specific, the exhibited behaviour of Li in liquid lead-lithium eutectic is consistent with findings from ab initio MD methods, and drastically different from predictions of previous C-MD studies which suggested a substantial segregation of Li atoms instead of dispersion. It is concluded that the functional form of the pair potential and its uniqueness influence both the pure liquid-metal properties and the validity of the potential transferability in multi-component systems, where a theoretical functional results in enhanced performance in pure and alloyed liquid systems., We thank Dr. Jordi Marti for the discussion about the NPA potential. The first author is a holder of FI AGAUR doctoral fellowship, provided by Generalitat de Catalunya and European Social Plus Fund. This work is partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe programme., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic computer experiments of the thermodynamic irreversibility of bulk nanobubbles in supersaturated and weak gas-liquid solutions

  • Al-Awad, Abdulrahman S.
  • Batet, Lluis
  • Rives, Ronny
  • Sedano, Luis A.
Spontaneous gas-bubble nucleation in weak gas-liquid solutions has been a challenging topic in theory, experimentation, and computer simulations. In analogy with recent advances in crystallization and droplet formation studies, the diffusive-shielding stabilization and thermodynamic irreversibility of bulk nanobubble (bNB) mechanisms are revisited and deployed to characterize nucleation processes in a stochastic framework of computer experiments using the large-scale atomic/molecular massively parallel simulator code. Theoretical bases, assumptions, and limitations underlying the irreversibility hypothesis of bNBs, and their computational counterparts, are extensively described and illustrated. In essence, it is established that the irreversibility hypothesis can be numerically investigated by converging the system volume (due to the finiteness of interatomic forces) and the initial dissolved-gas concentration in the solution (due to the single-bNB limitation). Helium nucleation in liquid Pb17Li alloy is selected as a representative case study, where it exhibits typical characteristics of noble-gas/liquid-metal systems. The proposed framework lays down the bases on which the stability of gas-bNBs in weak and supersaturated gas-liquid solutions can be inferred and explained from a novel perspective. In essence, it stochastically marches toward a unique irreversible state along out-of-equilibrium nucleation/growth trajectories. Moreover, it does not attempt to characterize the interface or any interface-related properties, neither theoretically nor computationally. It was concluded that bNBs of a few tens of He-atoms are irreversible when dissolved-He concentrations in the weak gas-liquid solution are at least ∼50 and ∼105 mol m-3 at 600 and 1000 K (and ∼80 MPa), respectively, whereas classical molecular dynamics -estimated solubilities are at least two orders of magnitude smaller., We thank E. Alvarez-Galera and Professor J. Marti for providing the helium solubility estimations for the deployed potentials. A.S.A. is a holder of AGAUR-FI ajuts (Grant No. 2023 FI-3) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This work was partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe program. This work was granted access to the HPC resources of the EUROfusion High Performance Computer at CINECA (Marconi-Fusion) under the project FUA37., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of n = 2 externally-applied magnetic perturbations on fast-ion confinement in MAST-U

  • Velarde, Lina
  • Rivero-Rodriguez, J.F.
  • Galdón Quiroga, Joaquín
  • Ryan, D. A.
  • Sanchís Sánchez, Lucía
  • Kabirov, D.
  • Cano Megías, Pilar
  • Rueda-Rueda, José
  • Liu, Y. Q.
  • McClements, K. G.
  • Parr, E.
  • Michael, C.
  • Henderson, S.
  • Chacartegui, Ricardo
  • EUROfusion Tokamak Exploitation Team
Experiments with externally-applied magnetic perturbations (MPs) have been carried out in MAST-U to study the effect on the fast-ion distribution. Scans performed of the current applied in the coils, the toroidal phase offset between the currents in the upper and lower coil sets, and of the absolute phase of the perturbation for two different sources of fast ions are presented and discussed for an n = 2 perturbation. The results indicate a modulation of the FILD signal with the applied perturbation, which is determined by the three scanned parameters, and also by the velocity-space of the fast-ion losses, suggesting a resonant interaction between the MP and the fast-ion orbits. To study this interaction, MARS-F has been used to compute the perturbed fields and the resulting magnetic field has been used as input in the modelling of first-orbit losses performed with ASCOT. The analysis of the fast-ion transport indicates that the resonances that overlap at the edge of the plasma may be responsible for the losses, in agreement with previous results from ASDEX Upgrade. Furthermore, simulations predict a modulation of the losses reaching FILD with the applied configuration, but with minima/maxima at phases opposite to those observed experimentally. This suggests that all non-axisymmetric field components, such as intrinsic error fields, need to be included in the MARS-F modelling, as well as all toroidal components of the perturbation., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200 - EUROfusion) and from the EPSRC Energy Programme (Grant Number EP/W006839/1). This research received funding from the Plan Andaluz de Investigación, Desarrollo e Innovación (PAIDI 2020, No. 003456/A02W), Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía and from the VII Plan Propio de Investigacion de la Universidad de Sevilla. J Galdon-Quiroga acknowledges support from the MSCA PF programme under Grant No. 101069021. P Cano-Megías acknowledges support from the Junta de Andalucía/CUII and the ESF+ (Grant Agreement No. DGP_POST_2024_00385)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and evaluation of an advanced robotic bolting tool applied to IFMIF-DONES

  • Redondo, V.
  • Barbosa, N.
  • Espinosa, P.
  • Ferre, M
Operating bolts is a key aspect in most maintenance procedures. This work focuses on IFMIF-DONES (The International Fusion Materials Irradiation Facility - DEMO Oriented Neutron Source being built in Granada), where the radiation conditions require the use of robots for the maintenance procedures and some bolts need to be tightened at high torques to warrant proper functioning during operation. The design presented in this contribution consists of a servo motor, a metallic structure, a socket wrench (as the physical interface with the bolt), a spring and a load cell between the motor and the socket wrench (to inform about the fitting of the bolt), and two slots for pins that will act both as reaction torque limiters and guiding system. For the evaluation of the tool, a set of validation tests has been carried out in a mock-up developed in the laboratory. It consists of different screws and pins placed in a horizontal plane reachable by the robotic arm. During the experiments, the forces and torques in the joints of the robot are monitored, their analysis is presented in this work., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Program (Grant Agreement No 101052200 — EUROfusion)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid kinetic-MHD simulations of ELMs with fast-ion kinetic effects in the ASDEX Upgrade tokamak

  • Dominguez-Palacios, J.
  • García-Muñoz, M.
  • Viezzer, Eleonora
  • Futatani, S.
  • Toscano-Jimenez, M.
  • González-Martín, Javier
  • Galdón Quiroga, Joaquín
  • Jansen van Vuuren, A.
  • Oyola, Pedro
  • Rueda-Rueda, José
  • Sanchís Sánchez, Lucía
  • Suzuki, Y.
  • Todo, Y.
This paper is part of the Special Collection: Papers from the 67th Annual Meeting of the APS Division of Plasma Physics, Paper NI3 4, Bull. Am. Phys. Soc. 70 (2025)., Hybrid kinetic-magnetohydrodynamic (MHD) simulations of edge-localized modes (ELMs) in the ASDEX Upgrade tokamak with the initial value code MEGA are presented in this manuscript and show that, when the fast-ion pressure becomes comparable to the MHD drive, the resulting imbalance between fast-ion and MHD forces increases the mode frequency, reaching values consistent with those observed experimentally in ELM crashes in the presence of fast-ions. First, we provide a detailed description of the numerical setup of MEGA to calculate plasma dynamics at the edge. Subsequently, the MHD module of MEGA is used to simulate the ELM crash without fast-ions, observing the plasma filaments that are ejected from the plasma region, with the consequence of the flattening of the driving sources. Next, systematic scans of the fast-ion parameter space are performed to understand fast-ion effects on ELMs. For core-localized fast-ion distributions, the ELM is unaltered and, after the ELM crash, an energetic particle mode is excited. In the presence of fast-ions at the plasma edge, the ELM crash is characterized by modes that become radially broader and with higher frequencies for increasing fast-ion birth energy., This work received funding from the Spanish Ministry of Science (Grant Nos. FPU17/05703 and PID2020-116822RB-I00). This work received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 805162). This work was supported by the NINS program of Promoting Research by Networking among Institutions. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Program (Grant Agreement No. 101052200—EUROfusion). This work was co-funded by the European Regional Development Fund (Andalusian Operational Program 2014–2020) and by the Ministry of Economic Transformation, Industry, Knowledge and Universities of the Junta de Andalucía within the framework of the PAIDI project with Ref. No. P18-FR-3812. The authors gratefully acknowledge the computer resources of the RES (Spanish Supercomputing Network) at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC), and the support from Marconi-Fusion, the High Performance Computer at the CINECA headquarters in Bologna (Italy) for its provision of supercomputer resources., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The Advanced Computing Hub at BSC: Improving fusion codes following modern software engineering standards

  • Saez Pous, Xavier|||0000-0003-1989-9485
  • Soba, Alejandro
  • Vinyals Ylla Català, Joan
  • Saxena, Gaurav
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Morales, Cristian
  • Vicente Dorca, David
  • Mantsinen, Mervi
Several dedicated High-Performance Computing (HPC) centers provide essential expertise and support in developing a suitable portfolio of EUROfusion standard codes. Barcelona Supercomputing Center (BSC) is one of these HPC hubs involved in this complex task. Several fusion codes were selected, installed and analyzed to meet the developers' requirements, ranging from portability to GPU, improving the performance, getting better data management, extending the capacity of coupling with other codes, etc. In this paper, we will describe the work developed by BSC and some of the tasks carried out in this project. We will explain briefly how the project is faced and the work required to create good quality codes, i.e. robust and trustable software capable of running efficiently in modern HPC systems., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Program (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The research group Fusion Group at Barcelona Supercomputing Center is grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya with code 2021 SGR 00908, and from the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033. This work was supported by the Ministry of Education, Youth and Sports of the Czech Republic through the e-INFRA CZ (ID:90254)., Peer Reviewed, "Article signat per 12 autors/es: Xavier Sáez, Alejandro Soba, Joan Vinyals Ylla Català, Gaurav Saxena, Marta Garcia Gasulla, Cristian Morales, David Vicente Dorca, Michael Komm, Ales Podolnik, Juri Romazanov, Edilberto Sanchez, Jose Luis Velasco and Mervi Mantsinen"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

L-H transition studies in tritium and deuterium–tritium campaigns at JET with Be wall and W divertor

  • Solano, Emilia R
  • Birkenmeier, Gregor
  • Garcia Silva, Carlos
  • Delabie, Ephrem
  • Hillesheim, J.C.
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi J.
{The recent deuterium–tritium campaign in JET-ILW (DTE2) has provided a unique opportunity to study the isotope dependence of the L-H power threshold in an ITER-like wall environment (Be wall and W divertor). Here we present results from dedicated L-H transition experiments at JET-ILW, documenting the power threshold in tritium and deuterium–tritium plasmas, comparing them with the matching deuterium and hydrogen datasets. From earlier experiments in JET-ILW it is known that as plasma isotopic composition changes from deuterium, through varying deuterium/hydrogen concentrations, to pure hydrogen, the value of the line averaged density at which the threshold is minimum, , increases, leading us to expect that (T) < (DT) < (D) < (H). The new power threshold data confirms these expectations in most cases, with the corresponding ordering of the minimum power thresholds. We present a comparison of this data to power threshold scalings, used for extrapolation to future devices such as ITER and DEMO., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme Grant Agreement No. 101052200—EUROfusion and from the EPSRC (Grant Number EP/W006839/1). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union, the European Commission or the ITER organization. Neither the European Union nor the European Commission nor the ITER organization can be held responsible for them. This work was supported in part by Spanish Grants FIS2017-85252-R and PID2021-127727OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF 'A way of making Europe'. The BSC part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033 and from the the Departament de Recerca i Universitats de la Generalitat de Catalunya with code 2021 SGR 00908. This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called 'PMW' for 2023., Peer Reviewed, "Article signat per més de 50 autors/es: E.R. Solano, G. Birkenmeier, C. Silva, E. Delabie, J.C. Hillesheim, A. Baciero, I. Balboa, M. Baruzzo, A. Boboc, M. Brix, J. Bernardo, C. Bourdelle, I.S. Carvalho, P. Carvalho, C.D. Challis, M. Chernyshova, A. Chomiczewska, R. Coelho4, I. Coffey, T. Craciunescu11, E. de la Cal, E. de la Luna, R. Dumont, P. Dumortier, M. Fontana, J.M. Fontdecaba, L. Frassinetti, D. Gallart, J. Garcia, C. Giroud, W. Gromelski, R.B. Henriques, J. Hall, A. Ho, L.D. Horton, L. Horvath, P. Jacquet, I. Jepu, E. Joffrin, A. Kappatou, D.L. Keeling, D.B. King, V.G. Kiptily, K.K. Kirov, D. Kos, E. Kowalska-Strzęciwilk, M. Lennholm, E. Lerche, E. Litherland-Smith, A. Loarte, B. Lomanowski, P.J. Lomas, C.F. Maggi, J. Mailloux, M.J. Mantsinen, M. Maslov, A.G. Meigs, I. Monakhov, R.B. Morales, A.H. Nielsen, D. Nina, C. Noble, E. Pawelec, M. Poradzinski, G. Pucella, P. Puglia, D. Réfy, J. Juul Rasmussen, E. Righi, F.G. Rimini, T. Robinson, M. Sertoli, S.A. Silburn, G. Sips, P. Sirén, Ž. Štancar, H.J. Sun, G. Szepesi, D. Taylor, E. Tholerus, B. Thomas, G. Verdoolaege, P. Vincenzi, B. Viola, N. Vianello, T. Wilson and JET Contributors"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Overview of Wendelstein 7-X high-performance operation

  • Grulke, Olaf
  • Acton, Georgia
  • Adamek, Jiri
  • Aggelis, Dorotheos
  • Alamo Calderón, Renzo Marcelo
  • Albert, Christopher
  • Aleynikov, Pavel
  • Aleynikova, Ksenia
  • Alonso de Pablo, Juan Arturo
  • Casas Pla, Josep Ramon|||0000-0003-4639-6904
The Wendelstein 7-X (W7-X) stellarator has completed two consecutive experimental campaigns OP 2.2 (Sep.-Dec. 2024) and OP 2.3 (Feb.-May 2025) under a new operational strategy enabling more than one year of uninterrupted device availability. This approach, supported by exceptionally high subsystem reliability, allowed sustained high-efficiency plasma operations with up to 80–100 discharges per day across a broad range of magnetic configurations. Several key technical upgrades-most notably the first operation of a 1.5¿MW class steady-state gyrotron, a new steady-state pellet injector, and advanced real-time feedback control systems significantly enhanced heating, fueling, and plasma control capabilities. Together, these improvements enabled major advances in long-pulse performance, high-ß (high-Beta) operation, and confinement optimization. Long-pulse discharges achieved 1.8GJ of injected energy under fully detached divertor conditions, while reduced-field scenarios facilitated record volume-averaged ß (Beta) values approaching 3%. High-performance plasmas with centrally peaked density profiles, created via neutral beam injection (NBI) or sustained pellet fueling, demonstrated strongly reduced turbulent transport and stellarator-record fusion triple products. Complementary studies of power exhaust and divertor heat loads revealed the role of scrape-off-layer drift physics in shaping strike-line patterns under attached conditions. Together, the results from OP 2.2 and OP 2.3 significantly expand the operational space of W7-X and strengthen its role as a leading platform for steady-state stellarator research and reactor-relevant plasma scenarios., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200–EUROfusion)., Peer Reviewed, Article signat per 519 autors/es: O. Grulke1,22,∗, G. Acton1, J. Adamek41, D. Aggelis42, R.-M. Alamo-Calderon70, C. Albert14, P. Aleynikov1, K. Aleynikova1, A. Alonso43, G.C. Amanekwe9, G. Anda37, T. Andreeva1, E. Andrew1, A. Arkuszewski4, S. Arnold1, M. Arranz43, M. Arvanitou19, E. Ascasibar43, M. Astrain Etxezarreta2, O. Asztalos37,63, K. Avramidis67, E. Aymerich27, A. Baciero43, J.-P. Bähner1, S.-G. Baek12, M. Balden2, J. Baldzuhn1, S. Ballinger65, M. Banduch1, S. Bannmann1, A. Bañon Navarro2, L. Baylor17, A. Benndorf1, C.D. Beidler1, D. Beiersdorf1, M. de Beij69, M. van Berkel69, N. Bertelli20, C. Biedermann1, B. Bieg62, T.M. Biewer17, G. Birkenmeier2, L. Björk1, B. Blackwell23, H. Blank2, T. Bluhm1, D. Böckenhoff1, D. Boeyaert35, D. Bold1, A. Bonciarelli1, G. Bongiovi7, M. Borchardt1, D. Borodin38, T. Bosman44, Y. Boumendjel35, H. Bouvain1, S. Bozhenkov1, T. Bräuer1, C. Brandt1, S. Brezinsek38, K.J. Brunner1, A. Buhler2, S. Buller30, L. Burton21, C. Büschel1, R. Bussiahn1, B. Buttenschön1, A. Buzás37, V. Bykov1, J. Cai38, I. Calvo43, A. Cappa43, A. Carls1, F. Carovani1, M. Carr45, D. Carralero43, T. Carroll20, B.B. de Carvalho6, J.R. Casas26, D. Castano-Bardawil9, J. Cavalier41, R. Cavazzana57, N. Chaudhary1, I. Chelis67, D. Cipciar1, G. Conway2, F. Cordella48, Y. Corre46, P. Costello1, K. Crombé9,51, G. Cseh37, B. Csillag2, H.I. Cu Castillo2, G. Czymek38, H. Damm1, R.J. Davies1, S. Degenkolbe1, W. Dekeyser47, L. Delgado-Aparicio20, A. Demby35, C. Desgranges46, C.-P. Dhard1, A. Dinklage1,29, T. Dittmar38, L. Dittrich1, S. Dräger1, M. Dreval5, M. Drevlak1, J. Droste29, R.K. Duligal44, P. Dumortier9, D. Dunai37, E. Edlund49, A. Edmondson35, P. van Eeten1, G. Ehrke1, M. Endler1, D.A. Ennis39, F.J. Escoto43, T. Estrada43, B. Faber35, F. Federici45, J. Fellinger1, Y. Feng1, D.L. Fernando2, S. Fischer1, O.P. Ford1, T. Fornal4, J. Frank1,21, H. Frerichs35, G. Fuchert1, K. Fujii17, M. Fukuyama8, J. Galdón Quiroga25, J. Gallego Llorente43, Y. Gao1, K. Garcia29, O.E. Garcia50, M. Garcia-Munoz25, J.M. García Regaña43, B. Geiger35, J. Geiger1, P. Geißler29, M. Gerard35, L. Giudicotti18, T. Gonda39, J.C. Gonzalez2, A. González Ganzábal43, A. Goodman1, A. Goriaev9,51, D. Gradic1, M. Grahl1, M. Grasser1, D. Grekov5, E. Grelier46, G. Grenfel2, M. Griener2, M. Groth13, M. Gruca4, F. Gudicotti40, J.F. Guerrero Arnaiz1, V. Haak1, M. de Haas20, A. Haeussler7, A. Hakola36, L. van Ham1, K.C. Hammond20, B. Hamstra44, X. Han35, S.K. Hansen12, A. Harris52, J.H. Harris17, D. Harting38, D. Hartmann1, D. Hathiramani1, E.V. Hausten1, S. Heinrich1, P. Helander1,29, G. Held35, P. Henderson20, F. Henke1, S.A. Henneberg12, L. Henschke1, F. Herold1, H. Hillebrecht35, E. Hinson17, M. Hirsch1, A. Hoffmeister29, A. Holtz1, S.J. Hörmann2,19, D. Höschen38, M. Houry46, J. Hromadka54, J. Hua38, X. Huang15, K. Hunger2, D. Hwangbo34, K. Ida15, Y. Igitkhanov7, S. Iglesias Fernandez43, V. Igochine2, Z. Ioannidis68, F.A. d’Isa57, S. Jablonski4, B. Jabło´ nski10, M. Jakubowski1, F. Jenko2, A. Johansson1, C. Johnson20, T.C.W. van Kaathoven44, J. Kaczmarczyk4, S. Kajita33, J.-P. Kallmeyer1, H. Kasahara15, W. Kasparek71, C. Kawan38, Ye.O. Kazakov9, S.A. Keller1, N. Kenmochi15, W. Kernbichler14, A.K. Kharwandikar1, M. Khokhlov1, C. Killer1, A. Kirschner38, R. Kleiber1, C.C. Klepper17, T. Klinger1,29, J. Knauer1, M. Knaup38, A. Knieps38, M. Kobayashi15, G. Kocsis37, M. Koelbl2, Y. Kolesnichenko3, A. Könies1, J. Kontula13, P. Kornejew1, Y. Kovtun5, M. Kozulia5, A. Krämer-Flecken38, M. Krause1, T. Kremeyer1, L. Krier1, D.M. Kriete39, T. Krings38, M. Krychowiak1, I. Ksiazek31, M. Kubkowska4, D. Kulla1, Y. Kulyk5, A. Kumar23, F. Kunkel1, T. Kurki-Suonio13, I. Kuzmych55, S. Kwak1, L. Laguardia27, A. Langenberg1, H. Laqua1, H.P. Laqua1,29, K. Leche71, B. Lee53, W. Lee1, H. Leyh1, Y. Liang38, L. Liao38, M. Licchelli1, Z. Lin28, M. Lisaj32, A. Litnovsky16,38, F. Litovoli7, J. Loizu56, B. Lomanowski17, R. Lopez Cansino25, B. Lopez Miranda43, D. Lopez-Rodriguez9, J. Lore17, A. Lorenz1, J. Louwe1, E. de la Luna43, R. Lunsford20, Y. Luo38, V. Lutsenko3, N. Maaziz1, M. Machielsen56, R. Mackenbach56, M. Madeira1, D. Makowski10, P. Manz29, E. Maragkoudakis1, O. Marchuk38, A. Marinoni12, M. Markl14, S. Marsen1, J. Martinez Fernandez43, Y. Martseniuk5, N. Marushchenko1, S. Masuzaki15, S. Matsheza21, D. Maurer39, M. Mayer2, D. Mazur31, K. McCarthy43, O. McCormack57, P. McNeely1, D. Medina Roque43, J. Meineke1, S. Meitner17, A. Menzel-Barbara1, B. van Milligen43, S. Misdanitis42, A. Mishchenko1, R. Mitteau46, E. Moeyaert47, A.I. Mohammed20, V.E. Moiseenko5,64, A. Möller1, S. Möller38, B. Molnar37, V. Moncada46, D. Morfin-Guerrero21, M.C.L. Morren44, D. Moseev1, G. Motojima15, S. Mulas43, P. Mulholland44, V. Murugesan1, M. Nagel1, D. Nagy37, V. Nair1, Y. Narbutt1, D. Naujoks1, H.G. Neilson20, F. Nespoli20, G. Neu2, R. Neu2, O. Neubauer38, U. Neuner1, S.K. Ngo46, D. Nicolai38, S.K. Nielsen22, N. Nikulsin1, T. Nishizawa8, L. Nitzsche1, C. Nührenberg1, R. Ochoukov2, G. Offermanns38, K. Ogawa15, J. Ongena9, J.W. Oosterbeek1, M. Otte1, E. Overduin1, N. Pablant20, L. Pacios43, N. Panadero43, A. Pandey1, K. Parks17, G. Partesotti1, E.A. Pasch1, S. de Pascuale17, R. Pavlichenko5, A. Pavone2, E. Pawelec31, A. de la Pena Gomez43, A. Pereira43, V. Perseo1, B. Peterson15, F. Pisano27, S. Pitcher40, B. Plaum71, G. Plunk1, L. Podavini1, N.S. Polei1, P. Poloskei1, S. Ponomarenko1, P. Pons-Villalonga29, A. Popov58, M. Porkolab12, J.H.E. Proll1,44, M.J. Pueschel69, A. Raak21, R. Ragona22, K. Rahbarnia1, M. Rasi´ nski38, J. Rasmussen22, O. Raths1, E. Rattawongnara1, D. Refy37, F. Reimold1, T. Richert1, M. Richou46, J. Ricken1, J.S. Riemann1, K. Riße1, J. de la Riva Villen43, G. Roberg-Clark1, E. Rodriguez1, C. Rogge1, V. Rohde2, J. Romazanov38, T. Romba1, D. Rondeshagen1, P. Rong1, M. Rud22, T. Rummel1, A. Runov1, N. Rust1, L. Ryc4, D. Ryndyk38, H. Sakai8, M. Salewski22, E. Sanchez43, L. Sanchis Sanchez13, S. Satake15, G. Satheeswaran38, J. Schacht1, E. Scharff1, F. Scharmer1, G. Schlisio1, K. Schmid2, B.S. Schmidt22, G.L. Schmidt20, O. Schmitz35, M. Schneider1, T. Schröder1, R. Schroeder1, M. Schülke1, B. Schweer9, S. Sereda1, B. Shanahan12, J. Shin35, S. Shiraiwa20, G. Sias27, P. Sichta20, F.B.T. Siddiki35, S. Simko35, L. Singh35, S. Sipilae13, C. Slaby1, M. ´ Sle¸czka32, B. Smith20, D.R. Smith35, H.M. Smith1, J. Smoniewski12, M. Spolaore57,66, A. Spring1, T. Stange1, A. von Stechow1, P. Steinbrunner2, I. Stepanov9, L. Stephey35, U. Stroth2,19, C. Suzuki15, Y. Suzuki59, C. Swee35, L. Syrocki4, T. Szepesi37, M. Szymanski4, H. Takahashi24, N. Tamura1, K. Tanaka15, C. Tantos7, S. Thiede1, H. Thienpondt43, H. Thomsen1, T. Thun1, S. Togo34, T. Tork1, M. Torkler29, H. Trimiño Mora1, A. Tsikouras1, D. Valougeorgis42, S. Varoutis1, M. Vavrik37, S. Vaz Mendes1, M. Vecsei1, J.L. Velasco43, L. Versemann1, M. Verstraeten9, M. Vervier9, N. Vianello60, E. Viezzer25, E.-M. Villalobos-Granados1, J. Wagner1, E. Wang38, M. Wappl1, F. Warmer1, Th. Wegner1, W. Wei38, G. Weir1, N. Wendler4, A. White12, M. Willensdorfer2, T. Windisch1, A. Winter1, V. Winters29, M. Wischmeier2, R. de Wolf47, R.C. Wolf1,21, J. Wright12, G. Wurden11, P. Xanthopoulos1, S. Xu38, H. Yamada33, X. Yan38, J. Yang38, Y. Yang38, K. Ye38, M. Yokoyama15, M. Yoshinuma15, B. Zamorski32, M. Zanini1, M. Zarnstorff20, D. Zhang1, C. Zhu61, M. Zilker2, J. Zimmermann1, A. Zocco1, H. Zohm2 and S. Zoletnik37 / 1 Max Planck Institute for Plasma Physics, Wendelsteinstr. 1, 17491 Greifswald, Germany 2 Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching, Germany 3 Institute for Nuclear Research, prospekt Nauky 47, Kyiv 03680, Ukraine 4 Institute of Plasma Physics and Laser Microfusion, 23 Hery Str., 01-497 Warsaw, Poland 5 Institute of Plasma Physics, National Science Center ‘Kharkiv Institute of Physics and Technology’, 1 Akademicheskaya St., Kharkiv 61108, Ukraine 6 Instituto de Plasmas e Fus˜ao Nuclear, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal 7 Karlsruhe Institute of Technology, Kaiserstr. 12, 76131 Karlsruhe, Germany 8 Kyushu University, 744 Motooka Nishi-ku, Fukuoka 819-0395, Japan 9 Laboratory for Plasma Physics, LPP-ERM/KMS, Av. de la Renaissance 30, 1000 Brussels, Belgium 10 Department of Microelectronics and Computer Science, Łód´zUniversity of Technology, Wolczanska 221/223, 93-005 Łód´z, Poland 11 Los Alamos National Laboratory, Los Alamos, NM 87545, United States of America 12 Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, MA 02139, United States of America 13 Aalto University, Konemiehentie 1, 02150 Espoo, Finland 14 Graz University of Technology, Rechbauerstraße 12, 8010 Graz, Austria 15 National Institute for Fusion Science, National Institutes of Natural Sciences, 322-6 Oroshi-cho, Toki, Gifu 509-5292, Japan 16 National Research Nuclear University MEPhI, Kashirskoe shosse, 31, 115409 Moscow, Russian Federation 17 Oak Ridge National Laboratory, 1 Bethel Valley Rd, Oak Ridge, TN 37831, United States of America 18 Department of Physics and Astronomy, Padova University, Via Marzolo 8, 35131 Padova, Italy 19 Physics Department, Technical University of Munich, TUM School of Natural Sciences, James-Franck-Str. 1, 85748 Garching, Germany 20 Princeton Plasma Physics Laboratory, 100 Stellarator Rd, Princeton, NJ 08543, United States of America 21 Technical University of Berlin, Straße des 17. Juni 135, 10623 Berlin, Germany 22 Department of Physics, Technical University of Denmark, Anker Engelunds Vej 1, 2800 Kgs Lyngby, Denmark 23 The Australian National University, Acton ACT 2601, Canberra, Australia 24 Tohoku University, 2-1-1 Katahira, Aoba Ward, Sendai, Miyagi 980-8577, Japan 25 Department of Atomic, Molecular and Nuclear Physics, University of Sevilla, San Fernando, 4, 41004 Sevilla, Andalucía, Spain 26 Universitat Politécnica de Catalunya. BarcelonaTech, C. Jordi Girona, 31, 08034 Barcelona, Spain 27 University of Cagliari, Via Universitá, 40, 09124 Cagliari, Italy 28 Department of Physics and Astronomy, University of California, 4129 Frederick Reines Hall, Irvine, CA92697, United States of America 29 University of Greifswald, Domstr. 11, 17489 Greifswald, Germany 30 University of Maryland, 8125 Paint Branch Drive, College Park, MA 20742, United States of America 31 University of Opole, plac Kopernika 11a, 45-040 Opole, Poland 32 University of Szczecin, Aleja Papie´za Jana Pawła II 22A, 70-453 Szczecin, Poland 33 University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chhiab 277-0882 Japan 34 University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8577, Japan 35 University of Wisconsin-Madison, Engineering Drive, Madison, WI 53706, United States of America 36 36 VTT Technical Research Centre of Finland Ltd., P. O. Box 1000, 02044 VTT, Finland 37 HUN-REN Centre for Energy Research, Institute for Atomic Energy Research, Konkoly-Thege Miklós út 29-33, 1121 Budapest, Hungary 38 Institute of Fusion Energy and Nuclear Waste Management—Plasmas Physics, Wilhelm-Johnen-Straße, 52425 Jülich, Germany 39 Auburn University, Auburn, AL 36849, United States of America 40 ITER Organization, 8 rue Jules Horowitz, 13115 Saint-Paul-lez-Durance, France 41 Institute of Plasma Physics of the Czech Academy of Science, U Slovanky 2525/1a, 182 00 Prague 8 Libeˇn, Czech Republic 42 University of Thessaly, Argonafton & Filellinon, Volos 38221, Greece 43 Laboratorio Nacional de Fusión, CIEMAT, Avenida Complutense 40, 28040 Madrid, Spain 44 Eindhoven University of Technology, 5600 MB Eindhoven, Netherlands 45 Culham Centre for Fusion Energy, Abingdon OX14 3EB, United Kingdom of Great Britain and Northern Ireland, 46 CEA Cadarache, 13115 Saint-Paul-lez-Durance, France 47 Katholieke Universiteit Leuven, Oude Markt 13, 3000 Leuven, Belgium 48 ENEA—Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Italy 49 SUNY Cortland, 21 Graham Ave, Cortland, NY 13045, United States of America 50 Department of Physics and Technology, UiT The Arctic University of Norway, Klokkargardsbakken 35, 9019 Tromsø, Norway 51 Department of Applied Physics, Ghent University, Sint-Pietersnieuwstraat 41 B4, 9000 Ghent, Belgium 52 Illinois State University, 100 North University Street, Normal, IL 61761, United States of America 53 Columbia University, 116th and Broadway, New York, NY 10027, United States of America 54 Charles University, Ovocn´ytrh 5, Prague 1, Czech Republic 55 Karazin Kharkiv National University, Svobody Square 4, Kharkiv 61022, Ukraine 56 ´ Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, Station 13, 1015 Lausanne, Switzerland 57 Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy 58 Ioffe Physical-Technical Institute of the Russian Academy of Sciences, 26 Politekhnicheskaya, St Petersburg 194021, Russian Federation 59 Hiroshima University, 1-5-1 Kagamiyama, Higashi-Hiroshima 739-8529, Japan 60 Consiglio Nazionale delle Ricerche, Piazzale Aldo Moro 7, 00185 Roma, Italy 61 University of Science and Technology of China, No.96, JinZhai Road Baohe District, Hefei, Anhui 230026, China 62 Politechnika Morska w Szczecinie, Zakład Fizyki ul. Wały Chrobrego 1-2, 70-500 Szczecin, Poland 63 Department of Nuclear Energy, Faculty of Natural Sciences, Budapest University of Technology and Economics, Mu˝egyetem rakpart 3, 1111 Budapest, Hungary 64 Uppsala University, Box 65, 75103 Uppsala, Sweden 65 Commonwealth Fusion Systems, 117 Hospital Rd, Devens, MA 01434, United States of America 66 Institute for Plasma Science and Technology, Corso Stati Uniti 4, 35127 Padova, Italy 67 Department of Physics, National and Kapodistrian University of Athens, Zografou University Campus, 15784 Athens, Greece 68 Department of Aerospace Science and Technology, National and Kapodistrian University of Athens, 34400 Psachna, Greece 69 Dutch Institute for Fundamental Energy Research, P.O. Box 6336, 5600 HH Eindhoven, Netherlands 70 Pontificia Universidad Católica del Perú, 1801 Universitaria Avenue, San Miguel Lima 32, Peru 71 Institute of Interfacial Process Engineering and Plasma Technology, Pfaffenwaldring 31, 70569 Stuttgart, Germany
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of RF waves – fast NBI ions interaction on the fusion performance in JET DTE2 campaign

  • Kirov, Krassimir K
  • Challis, Clive D
  • la Luna, Elena de
  • Eriksson, Jacob
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi
This work studies the interaction between Radio Frequency (RF) waves used for Ion Cyclotron Resonance Heating (ICRH) and the fast Deuterium (D) and Tritium (T) Neutral Beam Injected (NBI) ions in DT plasma. The focus is on the effect of this interaction, also referred to as synergistic effects, on the fusion performance in the recent JET DTE2 campaign. Experimental data from dedicated pulses at 3.43T/2.3MA heated at (i) 51.4MHz giving central minority H and n=2 D and at (ii) 32.2MHz for central minority 3He and n=2 T resonances were analyzed and conclusions were drawn and supported by modelling of the synergistic effects. TRANSP runs with and without RF kick operator predicted moderate increase, about 10%, in DT rates for the case of RF wave - fast D NBI ions interactions at n=2 harmonic of ion cyclotron resonance and negligible impact by synergistic interaction between fast T NBI ions and RF waves. JETTO modelling gives 29% enhancement of fusion rates due to RF waves – fast D NBI ions interaction and 18% enhancement for fast T NBI ions. Analysis of experimental neutron rates compared to TRANSP predictions without synergistic effects and Magnetic Proton Recoil (MPRu) neutron spectrometer indicate approximately 25-28% enhancement of fusion rates due to RF interaction with fast D ions and approximately 5-8% when RF wave – fast T NBI ions interaction is taking place. Contribution of various heating and fast ion sources have been assessed and discussed. }, This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion) and from the EPSRC [grant number EP/W006839/1]. To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.uk . Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them., Peer Reviewed, "Article signat per 23 autors/es: Krassimir K Kirov, Clive D Challis, Elena de la Luna, Jacob Eriksson, Daniel Gallart, Jeronimo Garcia, Marina Gorelenkova, Joerg Hobirk, Philippe Jacquet, Athina Kappatou, Yevgen Kazakov, David Keeling, Damian King, Ernesto A Lerche, Costanza F Maggi, Joelle Mailloux, Paola Mantica, Mervi Mantsinen, Mikhail Maslov, Sheena Menmuir, Paula Sirén, Žiga Štancar and Dirk Van Eester"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

  • Hobirk, Jörg
  • Challis, C.D.
  • Kappatou, Athina
  • Lerche, E.
  • Keeling, D.
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi M.
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challenges arising from 37 MW of injected power in the ITER like wall environment, keeping the radiation in the edge and core controlled, avoiding MHD instabilities and reaching high neutron rates. The Deuterium hybrid plasmas have been re-run in Tritium and methods have been found to keep the radiation controlled but not at high fusion performance probably due to time constraints. For the first time this scenario has been run in Deuterium-Tritium (50:50). These plasmas were re-optimised to have a radiation-stable H-mode entry phase, good impurity control through edge Ti gradient screening and optimised performance with fusion power exceeding 10 MW for longer than three alpha particle slow down times, 8.3 MW averaged over 5 s and fusion energy of 45.8 MJ., The BSC part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 and the CIEMAT part through grant PID2021-127727OB-I00, funded through MCIN/AEI/10.13039/501100011033 and ERDF "A way of making Europe". This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called 'PMW' for 2018–2023. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200 - EUROfusion) and from the EPSRC [Grant Number EP/W006839/1]. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the ITER organization., Peer Reviewed, "Article signat per més de 50 autors/es:" J. Hobirk, C.D. Challis, A. Kappatou, E. Lerche, D. Keeling, D. King, S. Aleiferis, E. Alessi, C. Angioni, F. Auriemma, M. Baruzzo, É. Belonohy, J. Bernardo, A. Boboc, I.S. Carvalho, P. Carvalho, F.J. Casson, A. Chomiczewska, J. Citrin, I.H. Coffey, N.J. Conway, D. Douai, E. Delabie, B. Eriksson, J. Eriksson, O. Ficker, A.R. Field, M. Fontana, J.M. Fontdecaba, L. Frassinetti, D. Frigione, D. Gallart, J. Garcia, M. Gelfusa, Z. Ghani, L. Giacomelli, E. Giovannozzi, C. Giroud, M. Goniche, W. Gromelski, S. Hacquin, C. Ham, N.C. Hawke, R.B. Henriques, J.C. Hillesheim, A. Ho, L. Horvath, I. Ivanova-Stanik, P. Jacquet, F. Jaulmes, E. Joffrin, H.T. Kim, V. Kiptily, K. Kirov, D. Kos, E. Kowalska-Strzeciwilk11, H. Kumpulainen24, K. Lawson2, M. Lennholm2,25, X. Litaudon14, E. Litherland-Smith2, P.J. Lomas, E. de la Luna, C.F. Maggi, J. Mailloux, M.J. Mantsinen, M. Maslov, G. Matthews, K.G. McClements, A.G. Meigs, S. Menmuir, A. Milocco, I.G. Miron, S. Moradi, R.B. Morales, S. Nowak, F. Orsitto, A. Patel, L. Piron, C. Prince, G. Pucella, E. Peluso, C. Perez von Thun, E. Rachlew, C. Reux, F. Rimini, S. Saarelma, P. A Schneider, S. Scully, M. Sertoli, S. Sharapov, A. Shaw, S. Silburn, A. Sips, P. Siren, C. Sozzi, E.R. Solano, Z. Stancar, G. Stankunas, C. Stuart, H.J. Sun, G. Szepesi, D. Valcarcel, M. Valisa, G. Verdoolaege, B. Viola, N. Wendler, M. Zerbini and JET Contributors"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The centrifuge of the Pellet Launching System for JT-60SA: initial test results

  • Ploeckl, Bernhard
  • Canchado, Manuel
  • Casalta, Joan Manel
  • Casamor Martinell, Oriol
  • Cavinato, Mario
  • Hajnal, Nandor
  • Lang, Peter
  • Martínez, Jordi
  • Nakamura, Shin
  • Olivella Martí, Guillem
  • Phillips, Guy
  • Toledo Romera, Rudolfo
  • Tretter, Joerg
  • Yamamoto, Shunya
Part of the Broader Approach, JT-60SA was established as satellite experiment supporting ITER and paving the way for a future fusion power plant. Its research plan calls for a powerful Pellet Launching System (PLS), capable for both particle fuelling and ELM pacing. These different tasks are achieved simultaneously by combining a pellet source for each purpose on a centrifuge. This stop cylinder type centrifuge provides dedicated pellet launch slots, which can be filled by the pellet sources controlled by a master programmable logic control (MasterPLC) system. Previously, centrifuges like those used at ASDEX Upgrade and JET were built by modifying a large turbomolecular pump and adding an acceleration arm. The advanced novel system reported here takes an approach that separates the drive from the arm. A ferrofluidic rotary motion feedthrough, capable of speeds up to 166 Hz, transfers the rotary motion from a commercial servomotor operating in the atmosphere to a rotor blade in the high vacuum. This system is designed to launch pellets with a velocity of up to 600 m/s when the centrifuge is rotating at 120 Hz. The factory acceptance test has almost been passed. After passing the endurance test, the system will be delivered to IPP Garching, followed by a commissioning phase in the pellet lab.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Performance Analysis and Optimizations of ERO2.0 Fusion Code

  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Vinyals Ylla Catala, Joan
  • Romazanov, Juri
  • Baumann, Christoph
  • Matveev, Dmitry
In this paper, we present a thorough performance analysis of a highly parallel Monte Carlo code for modeling global erosion and redeposition in fusion devices, ERO2.0. The study shows that the main bottleneck preventing the code from efficiently using the resources is the load imbalance at different levels. Load imbalance is inherent to the problem being solved, particle transport, and deposition. Based on the findings of the analysis, we also describe optimizations implemented on the code to improve its performance on HPC clusters. The proposed optimizations use MPI and OpenMP features, making them portable across architectures and achieving a 3.34x speedup with respect to the original code., This work has been carried out within the framework of the EURO-fusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200— EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The authors gratefully acknowledge the computing time granted by the JARA Vergabegremium and provided on the JARA Partition part of the supercomputer JURECA at Forschungszentrum Jülich., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Overview of interpretive modelling of fusion performance in JET DTE2 discharges with TRANSP

  • Štancar, Žiga
  • K. Kirov, Krassimir
  • Auriemma, Fulvio
  • Kim, Hyun-Tae
  • Poradzinski, Michal
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi J.
In the paper we present an overview of interpretive modelling of a database of JET-ILW 2021 D-T discharges using the TRANSP code. The main aim is to assess our capability of computationally reproducing the fusion performance of various D-T plasma scenarios using different external heating and D-T mixtures, and to understand the performance driving mechanisms. We find that interpretive simulations confirm a general power-law relationship between increasing external heating power and fusion output, which is supported by absolutely calibrated neutron yield measurements. A comparison of measured and computed D-T neutron rates shows that the calculations' discrepancy depends on the absolute neutron yield. The calculations are found to agree well with measurements for higher performing discharges with external heating power above ∼20 $\mathrm{MW}$, while low-neutron shots display an average discrepancy of around +40% compared to measured neutron yields. A similar trend is found for the ratio between thermal and beam-target fusion, where larger discrepancies are seen in shots with dominant beam-driven performance. We compare the observations to studies of JET-ILW D discharges, to find that on average the fusion performance is well modelled over a range of heating power, although an increased unsystematic deviation for lower-performing shots is observed. The ratio between thermal and beam-induced D-T fusion is found to be increasing weakly with growing external heating power, with a maximum value of $\gtrsim$1 achieved in a baseline scenario experiment. An evaluation of the fusion power computational uncertainty shows a strong dependence on the plasma scenario type and fusion drive characteristics, varying between ±25% and 35%. D-T fusion alpha simulations show that the ratio between volume-integrated electron and ion heating from alphas is $\lesssim$10 for the majority of analysed discharges. Alphas are computed to contribute between ∼15% and 40% to the total electron heating in the core of highest performing D-T discharges. An alternative workflow to TRANSP was employed to model JET D-T plasmas with the highest fusion yield and dominant non-thermal fusion component because of the use of fundamental radio-frequency heating of a large minority in the scenario, which is calculated to have provided ∼10% to the total fusion power., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. This work has been part-funded by the EPSRC Energy Programme with grant number EP/W006839/1. The Barcelona Supercomputing Center part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033. In addition BSC are grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya via the Research Group Fusion Group with code: 2021 SGR 00908. The Laboratorio Nacional de Fusión contribution was funded in part via the Spanish National R&D Project PID2021-127727OB-I00 funded through MCIN/AEI /10.13039/501100011033., Peer Reviewed, "Article signat per 43 autors/es: Ž. Štancar, K.K. Kirov, F. Auriemma, H.-T. Kim, M. Poradziński, R. Sharma, R. Lorenzini, Z. Ghani, M. Gorelenkova, F. Poli, A. Boboc, S. Brezinsek, P. Carvalho, F.J. Casson, C.D. Challis, E. Delabie, D. Van Eester, M. Fitzgerald, J.M. Fontdecaba, D. Gallart, J. Garcia, L. Garzotti, C. Giroud, A. Kappatou, Ye.O. Kazakov, D.B. King, V.G. Kiptily, D. Kos, E. Lerche, E. Litherland-Smith, C.F. Maggi, P. Mantica, M.J. Mantsinen, M. Maslov, S. Menmuir, M. Nocente, H.J.C. Oliver, S.E. Sharapov, P. Sirén, E.R. Solano, H.J. Sun, G. Szepesi and JET Contributors"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Influence of thermodynamic non-idealities on the interfacial properties of helium bubbles in liquid lead–lithium mixtures

  • Álvarez Galera, Edgar
  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Martí Rabassa, Jordi|||0000-0002-3721-9634
The extremely low solubility of helium in liquid metals may lead to rapid supersaturation, promoting spontaneous formation of helium bubbles by nucleation. Once nucleated, the stability of these bubbles is governed by the properties of the helium–liquid metal interface. In particular, interfacial tension between the immiscible phases controls bubble interactions and induces local pressure inhomogeneities. This work is motivated by the need of a better understanding of helium bubble formation in liquid Pbsingle bondLi alloys, which are of particular relevance for the design of breeding blankets in the future nuclear fusion reactors. We employ classical molecular dynamics simulations to investigate helium segregation in a wide range of lead–lithium systems, including the limiting cases of pure lead and pure lithium. Changes in local pressure are evaluated from direct mechanical calculations, enabling the characterization of interfacial properties. Interfacial tension and radius of the bubble are subsequently determined across multiple thermodynamic conditions, spanning temperatures starting near the melting points of the constituent metals up to 1021 K. The impact of curvature and composition of the alloy on the interfacial behaviour are also investigated., The authors thank A.S. Al-Awad for fruitful discussions. J.M. and L.B. acknowledge financial support from the EUROfusion project (HORIZON-101052200-EUROfusion). J.M. and E.A.G. thank financial support of project PID2024-157478NB-C32 funded by MCIN/AEI/ 10.13039/5011000-11033 and ERDF ‘A way of making Europe’ by the ‘European Union NextGenerationEU/PRTR’. J.M. gratefully acknowledges financial support from the Generalitat de Catalunya, Spain (Grant 2021 SGR 01411). E.A.G. was awarded a fellowship at the Polytechnic University of Catalonia (UPC) by the Spanish ‘Consejo de Seguridad Nuclear’ through the ARGOS Chair of Nuclear Safety and Radiation Protection. E.A.G. also thanks the UPC for financial support through the doctoral grant extension for the fourth year., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Henry's constant of helium in liquid lead-lithium alloys

  • Álvarez Galera, Edgar
  • Laria, Daniel Héctor
  • Mazzanti Castrillejo, Fernando Pablo|||0000-0001-6641-0609
  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Martí Rabassa, Jordi|||0000-0002-3721-9634
Information about the solubility of helium in liquid metals is of fundamental relevance in the design of the future nuclear fusion reactors, since the formation of helium bubbles inside the breeding blankets of the reactors constitutes a threat to the durability of the devices and, more importantly, to the efficiency of tritium recovery. In the present work, we report molecular dynamics simulations results of the solubility of helium in a variety of lead-lithium alloys. Simulation experiments have been combined with a classical perturbative procedure able to compute the free energy of insertion of a helium atom inside a liquid metal bath, directly related to the solubility of helium. As the most important case, the eutectic state (16%Li-84%Pb at 508 K) has been explored in full details, predicting a solubility value of (6.1 ± 1.4) × 10^(-16) Pa-1. In addition, several temperatures and atomic fractions of the solvent have been explored. For any temperature, we have found that the solubility of helium in pure lithium is lower than in pure lead. We have also studied the 1000 K isotherm and observed that there is a minimum solubility value for ~ 80%Li-20%Pb. The observed trends indicate that solubilities rise with increasing temperatures., The authors thank A.Al-Awad for fruitful discussions. J.M. and L.B. acknowledge financial support from the EUROfusion project (HORIZON-101052200-EUROfusion). J.M. and E.A. thank financial support of project PID2021-124297NB-C32 funded by MCIN/AEI/10.13039/5011000-11033 and ERDF “A way of making Europe” by the “European Union NextGenerationEU/PRTR”. F.M. and J.M. gratefully acknowledge financial support from the Generalitat de Catalunya (Grant 2021 SGR 01411). F.M. acknowledges support under project PID2023-147469NB-C21 by the Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Spain). E.A. has been awarded a fellowship at the Polytechnic University of Catalonia by the Spanish “Consejo de Seguridad Nuclear” through the ARGOS Chair of Nuclear Safety and Radiation Protection. D.L. is on leave of absence from “Departamento de Química Inorgánica, Analítica y Química-Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires” (DQIAQF-FCEN-UBA) and from “Departamento de Física de la Materia Condensada, Comisión Nacional de Energía Atómica” (DFMC-TANDAR-CNEA), Avenida Libertador 8250, Buenos Aires, 1429, Argentina., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

  • Dominguez Palacios, Jesus
  • Garcia Muñoz, Manuel
  • Toscano Jimenez, Manuel
  • Liu, Yueqiang
  • Mancini, Alessio
  • Cruz Zabala, Diego Jose
  • Berkery, John
  • Labbate, John A.
  • Parisi, Jason
  • Todo, Yasushi
  • Reyner Viñolas, Alex
  • Podestà, Mario
  • Viezzer, Eleonora
  • Oyola Dominguez, Pablo
  • Futatani, Shimpei|||0000-0001-5742-5454
Linear magnetohydrodynamic (MHD) simulations for the SMall Aspect Ratio Tokamak (SMART) have been carried out for the first time, for both positive (PT) and negative triangularity (NT) shaped plasmas using the MARS-F code. The MHD stability of projected SMART plasmas against internal kinks, infernal modes and edge peeling-ballooning modes have been analyzed for a wide range of realistic equilibria. A stabilization of internal kinks and infernal modes is observed when increasing the safety factor profile and reducing plasma beta. PT shaped plasmas are more stable against both internal kinks and infernal modes than their counterpart NT shaped plasmas. Toroidal flows have little impact on the MHD stability of the internal kinks, but they have a strong stabilizing effect on infernal modes, which can be further mitigated in NT shaped plasmas. The MHD stability of peeling-ballooning modes is reduced in NT shaped plasmas, as observed in conventional tokamaks., This work received funding from the Spanish Ministry ofScience (Grant Nos. FPU17/05703 and PID2020-116822RB-I00) and from the European Research Council (ERC) underthe European Union’s Horizon 2020 research and innov-ation programme (Grant Agreement No. 805162). Thiswork was supported by the NINS program of PromotingResearch by Networking among Institutions. This work wasco-funded by the European Regional Development Fund(Andalusian Operational Programme 2014 – 2020) and by theMinistry of Economic Transformation, Industry, Knowledgeand Universities of the Junta de Andalucía within theframework of the PAIDI project with reference P18-FR-3812. This work has been carried out within the frameworkof the EUROfusion Consortium, funded by the EuropeanUnion via the Euratom Research and Training Programme(Grant Agreement No 101052200 – EUROfusion). Viewsand opinions expressed are however those of the author(s)only and do not necessarily reflect those of the EuropeanUnion or the European Commission. Neither the EuropeanUnion nor the European Commission can be held respons-ible for them. Additional support was provided by the U.S.Department of Energy under Contract Number DE-ACO2-09CH11466 (PPPL), as well as the Science UndergraduateLaboratory Internship (SULI) program. The authors grate-fully acknowledge the computer resources of RES (Spanish13 Nucl. Fusion64(2024) 126028J. Dominguez-Palacioset alSupercomputing Network) at MareNostrum and the tech-nical support provided by Barcelona Supercomputing Center(BSC), as well as those of CICA (Centro InformáticoCientífico de Andalucía). The authors gratefully acknowledgethe help of Oak Nelson with the BALOO code.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical investigation of 3D MHD pressure drop in a prototypical fusion blanket manifold using OpenFOAM

  • Rives Sanz, Ronny|||0000-0002-9789-9926
  • Batet Miracle, Lluís|||0000-0003-1882-6313
Reliable prediction of magnetohydrodynamic (MHD) pressure losses in liquid-metal breeding blankets is essential for DEMO reactor design. In the European Dual Coolant Lead–Lithium (EU-DCLL) concept, manifold expansions and contractions are expected to dominate the total pressure drop. This work investigates the three-dimensional (3D) MHD pressure drop associated with a sudden expansion representative of the EU-DCLL bottom manifold, using a customized OpenFOAM solver. The solver is validated against analytical solutions and benchmark numerical codes, demonstrating superior stability and mesh efficiency. A set of 45 simulations is conducted for expansion ratios 4–8, Hartmann numbers 1000–5000, and Reynolds numbers 50–2000, spanning the viscous–electromagnetic (VE), inertial–electromagnetic (IE), and intermediate (IVE) regimes. The results reveal complex 3D current loops and flow reversals at high Hartmann numbers. Building on the Rhodes et al. (2018) formulation, we propose a modified correlation with a finite asymptotic term, applicable across VE, IVE, and IE regimes. The new model captures the numerical database with excellent accuracy (R^2 = 0.9914, RMSE = 0.0021) and predicts a 3D MHD pressure drop of ¿P3D = 1.50 kPa under EU-DCLL operating conditions. These findings improve the theoretical consistency of MHD pressure-loss modeling and support manifold optimization for future DEMO blanket designs., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. This work was granted access to the EUROfusion High Performance Computer facilities at CINECA (Marconi and Leonardo clusters) under projects FUA37 and FUA38. The authors gratefully acknowledge the DCLL rear-circuit data provided by F. R. Urgorri and I. Fernández (CIEMAT), as well as their valuable comments on the MHD pressure-drop calculations for the EU-DCLL blanket., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

EMWAVE: Código FEM para la simulación de ondas de radiofrecuencia en plasmas confinados magnéticamente

  • Domingo Ramos, Hernán
  • Gallart Escolà, Daniel
  • Soba Pascual, Alejandro
  • Mantsinen, Mervi Johanna
The analysis of electromagnetic (EM) wave propagation in an inhomogeneous, magnetically confined plasma is essential for nuclear fusion, particularly for ion and electron heating. This paper presents EMWAVE, a finite element code that simulates EM wave propagation in an anisotropic plasma by solving the Helmholtz equation in the frequency domain. The solver supports linear and quadratic elements and efficiently models complex domains. Various dielectric media and tokamak relevant configurations have been benchmarked, demonstrating the code’s reliability. EMWAVE incorporates the cold plasma permittivity tensor, showing excellent agreement with the well established ERMES code and theoretical predictions for tokamak cutoffs. Developed as a standalone tool and integrated into the HPC framework Alya, it aims to support reactor-scale simulations via a digital twin approach. Future work includes implementing a hot plasma permittivity tensor to capture wave particle interactions and extending the model to 3D reactor geometries., Este trabajo se ha realizado en el marco del Consorcio EUROfusion, financiado por la Unión Europea a través del Euratom Research and Training Programme (Acuerdo de subvención nº 101052200-EUROfusion). No obstante, las opiniones y puntos de vista expresados son exclusivamente los del autor y no reflejan necesariamente los de la Unión Europea o la Comisión Europea. Ni la Unión Europea ni la Comisión Europea pueden ser consideradas responsables de las mismas. Quisiéramos agradecer a FuseNet Association por su contribución económica en las etapas iniciales de este proyecto y al programa BSC AI4Science Fellowships por la financiación de mi período doctoral. Agradecemos el soporte recibido por el Departament de Recerca i Universitats de la Generalitat de Catalunya a través del grupo de investigación Fusion Group con código: 2021 SGR 00908., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Detection of alpha heating in JET-ILW DT plasmas by a study of the electron temperature response to ICRH modulation

  • Mantica, Paola
  • Auriemma, Fulvio
  • Casiraghi, I.
  • Gallart, Daniel|||0000-0003-1663-3550
  • Kirov, K.
  • Mantsinen, Mervi M.
In the JET DTE2 campaign a new method was successfully tested to detect the heating of bulk electrons by α-particles, using the dynamic response of the electron temperature T e to the modulation of ion cyclotron resonance heating (ICRH). A fundamental deuterium (D) ICRH scheme was applied to a tritium-rich hybrid plasma with D-neutral beam injection (NBI). The modulation of the ion temperature T i and of the ICRH accelerated deuterons leads to modulated α-heating with a large delay with respect to other modulated electron heating terms. A significant phase delay of ∼40° is measured between central T e and T i, which can only be explained by α-particle heating. Integrated modelling using different models for ICRH absorption and ICRH/NBI interaction reproduces the effect qualitatively. Best agreement with experiment is obtained with the European Transport Solver/Heating and Current Drive workflow., This work was carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The BSC part of this work are grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya via the Research Group Fusion Group with code: 2021 SGR 00908., Peer Reviewed, "Article signat per 31 autors/es: P. Mantica, F. Auriemma, I. Casiraghi, D. Gallart, K. Kirov, E. Lerche, A. Salmi, A. Dal Molin, E. Delabie, J. Eriksson, J. Garcia, P. Huynh, P. Jacquet, T. Jonsson, V. Kiptily, E. Litherland–Smith, C.F. Maggi, M. Mantsinen, G. Marcer, M. Maslov, S. Menmuir, M. Nocente, E. Peluso, G. Pucella, D. Rigamonti, Z. Stancar, H. Sun, G. Szepesi, M. Tardocchi, D. Van Eester and JET Contributors"
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Molecular dynamics simulations of helium nucleation in liquid lead-lithium alloys

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stochastic computer experiments of the thermodynamic irreversibility of bulk nanobubbles in supersaturated and weak gas-liquid solutions

  • Al Awad, Abdulrahman|||0000-0002-5502-0207
  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Rives Sanz, Ronny|||0000-0002-9789-9926
  • Sedano, Luis
Spontaneous gas-bubble nucleation in weak gas-liquid solutions has been a challenging topic in theory, experimentation, and computer simulations. In analogy with recent advances in crystallization and droplet formation studies, the diffusive-shielding stabilization and thermodynamic irreversibility of bNBs mechanisms are revisited and deployed to characterize nucleation processes in a stochastic framework of computer experiments using LAMMPS code. Theoretical bases, assumptions and limitations underlying the irreversibility hypothesis of bNBs, and their computational counterparts, are extensively described and illustrated. In essence, it is established that the irreversibility hypothesis can be numerically investigated by converging the system volume (due to the finiteness of interatomic forces) and the initial dissolved-gas concentration in the solution (due to the single-bNB limitation). Helium nucleation in liquid Pb17Li alloy is selected as a representative case study, where it exhibits typical characteristics of NG/LM systems. The proposed framework lays down the bases on which stability of gas-bNBs in weak and supersaturated gas-liquid solutions can be inferred and explained from a novel perspective. In essence, it stochastically marches towards a unique irreversible state along out-of-equilibrium nucleation/growth trajectories. Moreover, it does not attempt to characterize the interface or any interface related properties, neither theoretically nor computationally. It was concluded that bNBs of a few tens of He-atoms are irreversible when dissolved-He concentrations in the weak gas-liquid solution are at least ~ 50 mol.m^-3 and ~ 105 mol.m^-3 at 600 K and 1000 K (and ~ 80 MPa), respectively, whereas CMD-estimated solubilities are at least two orders of magnitude smaller., We thank E. Alvarez-Galera and Professor J. Marti for providing the helium solubility estimations for the deployed potentials. A.S.A. is a holder of AGAUR-FI ajuts (Grant No. 2023 FI-3) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This work was partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe program. This work was granted access to the HPC resources of the EUROfusion High Performance Computer at CINECA (Marconi-Fusion) under the project FUA37., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observation of alpha-particles in recent D–T experiments on JET

  • Kiptily, Vasily
  • Challis, C.D.
  • Dumont, Remi
  • Fitzgerald, M.
  • Garcia, Jeronimo
  • Mantsinen, Mervi J.
The fusion reaction between deuterium and tritium, D(T,n)4He is the main source of energy in future thermonuclear reactors. Alpha-particles (4He-ions) born with an average energy of 3.5 MeV transferring energy to the thermal plasma during their slowing down, should provide the self-sustained D–T plasma burn. The adequate confinement of α-particles is essential to provide efficient heating of the bulk plasma and steady burning of a reactor plasma. That is why the fusion-born α-particle studies have been a priority task in the second D–T experiments (DTE2) on the Joint European Torus (JET) to understand the main mechanisms of their slowing down, redistribution and losses and to develop optimal plasma scenarios. JET with Be-wall and W-divertor, enhanced auxiliary heating systems and improved energetic-particle diagnostic capabilities, producing significant population of α-particles, provided the possibility for comprehensive studying of the α-particle behaviour. Selected results of the confined and lost α-particle measurements, evidence of α-particle self-heating and assessments of the fusion performance are presented in this paper giving an opportunity for further modelling and extrapolation to the International Thermonuclear Experimental Reactor and burning plasma reactors., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200—EUROfusion) and from the RCUK Energy Programme (Grant Number EP/W006839/1). Also, this work partially supported by the U.S. Department of Energy under Contract Number DE-AC02-09CH11466, by the Polish Ministry of Science and Higher Education within the programme 'PMW' for 2022-2023, by the Grants FIS2017-85252-R and PID2021-127727OB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and ERDF 'A way of making Europe'. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.u, Peer Reviewed, "Article signat per 50 autors/es: V.G. Kiptily, C.D. Challis, R. Dumont, M. Fitzgerald, J. Garcia, L. Garzotti, Z. Ghani, J. Hobirk, P. Jacquet, A. Kappatou, D. Keeling, Ye. Kazakov, P. Mantica, M.J. Mantsinen, S.E. Sharapov, E.R. Solano, D. Van Eester, P.J. Bonofiglo, T. Craciunescu, A. Dal Molin, J. Eriksson, V. Goloborodko, M.V. Iliasova, E.M. Khilkevitch, D. King, I. Lengar, M. Nocente, S. Menmuir, M. Podestà, M. Poradzinski, D. Rigamonti, J. Rivero-Rodriguez, Z. Stancar, A.E. Shevelev, P. Siren, H. Sun, D.M. Taylor, M. Tardocchi, P. Beaumont, F. Belli, F.E. Cecil, R. Coelho, M. Curuia, M. Garcia-Munoz, E. Joffrin, C. Lowry, M. Lennholm, E. Lerche, C.F. Maggi, J. Mailloux, D. Marocco, M. Maslov, C. Perez Von Thun, F. Rimini, V. Zoita and JET Contributors"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of ICRF Heating Schemes in ITER Non-Active Plasmas Using PION+ETS Integrated Modeling

  • Bensadon, Tomas
  • Mantsinen, Mervi J.
  • Jonsson, Thomas
  • Gallart, Daniel|||0000-0003-1663-3550
  • Saez Pous, Xavier|||0000-0003-1989-9485
  • Manyer, Jordi
The PION code has been integrated into the European Transport Solver (ETS) transport workflow, and we present the first application to model Ion Cyclotron Resonance Frequency (ICRF) heating scenarios in the next-step fusion reactor ITER. We present results of predictive, self-consistent and time-dependent simulations where the resonant ion concentration is varied to study its effects on the performance, with a special emphasis on the resulting bulk ion heating and thermal ion temperature. We focus on two ICRF heating schemes, i.e., fundamental H minority heating in a 4He plasma at 2.65 T/7.5 MA and a three-ion ICRF scheme consisting of fundamental 3He heating in a H-4He plasma at 3.3 T/ 8.8 MA. The H minority heating scenario is found to result in strong absorption by resonant H ions as compared to competing absorption mechanisms and dominant background electron heating for H concentrations up to 10%. The highest H absorption of ∼80% of the applied ICRF power and highest ion temperature of ∼15 keV are obtained with an H concentration of 10%. For the three-ion scheme in 85%:15% H:4He plasma, PION+ETS predicts 3He absorption in the range of 21–65% for 3He concentrations in the range of 0.01–0.20%, with the highest 3He absorption at a 3He concentration of 0.20%., This research was funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Overview of the third JET deuterium-tritium campaign

  • Kappatou, Athina
  • Baruzzo, Matteo
  • Hakola, Antti
  • Jofrinn, Emmanuel Henri
  • Keeling, David
  • Mantsinen, Mervi J.
JET returned to deuterium-tritium operations in 2023 (DTE3 campaign), approximately two years after DTE2. DTE3 was designed as an extension of JET’s 2022-2023 deuterium campaigns, which focused on developing scenarios for ITER and DEMO, integrating in-depth physics understanding and control schemes. These scenarios were evaluated with mixed D-T fuel, using the only remaining tritium-capable tokamak until its closure in 2023. A core-edge-SOL integrated H-mode scenario was developed and tested in D-T, showing good confinement and partial divertor detachment with Ne-seeding. Stationary pulses with good performance, no tungsten accumulation, and even without ELMs were achieved in D-T. Plasmas with pedestals limited by peeling modes were studied with D, T-rich, and D-T fuel, revealing a positive correlation between pedestal electron pressure and pedestal electron density. The Quasi-Continuous Exhaust regime was successfully achieved with D-T fuel, with access criteria similar to those in D plasmas. A scenario with full detachment, the X-point radiator regime, was established in D-T, aided by the real-time control of the radiator’s position. The crucial characterisation of tritium retention continued in DTE3, using gas balance measurements and the new LID-QMS diagnostic. Nuclear technology studies were advanced during the DTE3 campaign, addressing issues such as the activation of water in cooling loops and single event effects on electronics. Building on the previous D, T and DTE2 campaigns and the lessons learned from them, DTE3 extended our understanding of D-T plasmas, particularly in scenarios relevant to next-generation devices such as ITER and DEMO., The authors acknowledge and thank the JET team for their hard work and commitment. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 10 105 2200 - EUROfusion). The Swiss contribution to this work has been funded by the Swiss State Secretariat for Education, Research and Innovation (SERI). This work was supported in part by Grant PID2021-12 7727OB-I00, funded by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13 039/50 110 0011 033, and by ERDF/EU. This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called ‘PMW’ for 2022–2024. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union, the European Commission or SERI. Neither the European Union nor the European Commission nor SERI can be held responsible for them., Peer Reviewed, "Article signat per 71 autors/es: A Kappatou*, M Baruzzo, A Hakola, E Joffrin, D Keeling, B Labit, E Tsitrone, N Vianello, M Wischmeier, I Balboa, J Bernardo, M Bernert, T Bosman, S Brezinsek, D Brida, I S Carvalho, P Carvalho, L Ceelen, C D Challis, I Coffey, T Dittmar, M Dunne, M Faitsch, A R Field, L Frassinetti, L Garzotti, Z Ghani, C Giroud, S Henderson, R B Henriques, J Hobirk, P Jacquet, I Jepu, Ye O Kazakov, D B King, K K Kirov, D Kos, K Krieger, M Lennholm, E Lerche, X Litaudon, E Litherland-Smith, P Lomas, C Lowry, J Mailloux, M J Mantsinen, M Maslov, D Matveev, A Meigs, S Menmuir, C Olde, C Perez von Thun, L Piron, G Pucella, H Reimerdes, F Rimini, O Sauter, P A Schneider, B Sieglin, S Silburn, E R Solano, H Sun, D F Valcarcel, D van Eester, R Villari, A Widdowson, S Wiesen, M Zlobinski, V K Zotta, the JET contributors and the EUROfusion Tokamak Exploitation Team"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Parametrization of embedded-atom method potential for liquid lithium and lead-lithium eutectic alloy

  • Al Awad, Abdulrahman|||0000-0002-5502-0207
  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Sedano Miguel, Luis Ángel|||0000-0002-3629-8297
Liquid lead-lithium eutectic remains as a promising candidate for various breeding-blanket designs in future nuclear-fusion technologies. The lack of a generalized theory of interatomic forces in the liquid state is reflected on the wide variety of proposed functional forms to describe interatomic interactions even in simple liquids. Computer simulations facilitate the study of liquid metal properties, due to mathematical and experimental challenges. A classical-MD EAM potential is parametrized using mechanical and non-mechanical (melting-point) properties to minimize the arbitrariness of functional forms, where the employed pair potential stems from the liquid-state theory to avoid the issue of the uniqueness of the potential. Enhanced performance is obtained for liquid density, energy, structure, diffusivity and shear viscosity of Li, and their temperature-dependencies. In a similar manner, reference experimental and ab initio MD data are used to parametrize a functional to describe Pb-Li pairwise interactions in liquid Pb-Li alloy, which is used with the derived EAM of liquid Li and a reference EAM of liquid Pb to investigate properties of liquid Pb-Li alloy. Enhanced transferability characteristics are obtained for low-in-lithium liquid Pb-Li melts, where Coulombic interactions are negligible. In specific, the exhibited behaviour of Li in liquid lead-lithium eutectic is consistent with findings from ab initio MD methods, and drastically different from predictions of previous C-MD studies which suggested a substantial segregation of Li atoms instead of dispersion. It is concluded that the functional form of the pair potential and its uniqueness influence both the pure liquid-metal properties and the validity of the potential transferability in multi-component systems, where a theoretical functional results in enhanced performance in pure and alloyed liquid systems., The first author is a holder of FI AGAUR doctoral fellowship, provided by Generalitat de Catalunya and European Social Plus Fund. This work is partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe programme., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of fusion alphas interaction with RF waves in D-T plasma at JET

  • Kirov, Krassimir K
  • Auriemma, Fulvio
  • Bonofiglo, Phillip
  • Challis, Clive D
  • de la Luna, Elena
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi M.
This work studies the influence of RF waves in ICRH range of frequency on fusion alphas during the recent JET D-T campaign. Fusion alphas from D-T reactions are born with energies of about 3.5MeV and therefore have significant Doppler shift enabling synergistic interaction between them and RF waves at broad range of frequencies including the ones foreseen for future fusion machines ITER and SPARC. Resonant interaction between RF waves and alphas, also called synergistic effects, will modify the alpha distribution and ultimately will have an impact on alpha orbit losses and heating. Data from JET 3.43T/2.3MA pulses based on the hybrid scenario during the DTE2 campaign were used for the analysis in this study. The impact of synergistic effects on alpha orbit losses and alpha heating is assessed. Conclusions are based on analysis of experimental data for fast alphas losses, i.e. measurements from neutral particle analyser, fast ion losses scintillator detector, Faraday cups, and TRANSP simulations. Experimental data and TRANSP analysis indicate that there are indeed changes in the alphas’ distribution function due to interaction with RF waves. Data from the scintillator detector and the Faraday cups were compared for pulses with and without ICRH power and versus cases with enhanced alpha losses due to MHD activities. The trends from these diagnostics consistently show no additional alpha losses due to interaction with RF waves. TRANSP predictions for the impact of the synergistic effects on alpha heating show up to 42% increase in alpha electron heating and up to 25% increase in alpha ion heating. These effects however become negligibly small, less than 1%, when alpha heating is compared to the total auxiliary hearting power in the investigated JET pulses., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them., Peer Reviewed, "Article signat per 27 autors/es: Krassimir K Kirov, Fulvio Auriemma, Phillip Bonofiglo, Clive D Challis, Elena de la Luna, Jacob Eriksson, Daniel Gallart, Jeronimo Garcia, Marina Gorelenkova, Joerg Hobirk, Philippe Jacquet, Athina Kappatou, Yevgen Kazakov, David Keeling, Damian King, Vasily Kiptily, Ernesto A Lerche, Costanza F Maggi, Joelle Mailloux, Paola Mantica, Mervi Mantsinen, Mikhail Maslov, Sheena Menmuir, Ridhima Sharma, Paula Sirén, Žiga Štancar and Dirk Van Eester"
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observation of magnetic islands in tokamak plasmas during the suppression of edge-localized modes

  • Willensdorfer, Matthias
  • Mitterauer, Verena
  • Hoelzl, Matthias
  • Suttrop, Wolfgang
  • Cianciosa, Mark
  • Dunne, Mike
  • Fischer, Rainer
  • Leuthold, Nils
  • Puchmayr, Jonas
  • Samoylov, Oleg
  • Suárez López, Guillermo
  • Wendler, Daniel
  • Futatani, Shimpei|||0000-0001-5742-5454
  • Gallart Escolà, Daniel
  • Mantsinen, Mervi Johanna
In tokamaks, a leading platform for fusion energy, periodic filamentary plasma eruptions known as edge-localized modes occur in plasmas with high-energy confinement and steep pressure profiles at the plasma edge. These edge-localized modes could damage the tokamak wall but can be suppressed using small three-dimensional magnetic perturbations. Here we demonstrate that these magnetic perturbations can change the magnetic topology just inside the steep gradient region of the plasma edge. We identify signatures of a magnetic island, and their observation is linked to the suppression of edge-localized modes. We compare high-resolution measurements of perturbed magnetic surfaces with predictions from ideal magnetohydrodynamic theory where the magnetic topology is preserved. Although ideal magnetohydrodynamics adequately describes the measurements in plasmas exhibiting edge-localized modes, it proves insufficient for plasmas where these modes are suppressed. Nonlinear resistive magnetohydrodynamic modelling supports this observation. Our study experimentally confirms the predicted role of magnetic islands in inhibiting the occurrence of edge-localized modes. This will be beneficial for physics-based predictions in future fusion devices to control these modes., This material is based upon work supported by the US Department of Energy under award DE-SC0021968. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (grant agreement no. 101052200-EUROfusion)., Peer Reviewed, Article signat per 437 autors: Max Planck Institute for Plasma Physics, Garching, Germany: Matthias Willensdorfer, Verena Mitterauer, Matthias Hoelzl, Wolfgang Suttrop, Mike Dunne, Rainer Fischer, Jonas Puchmayr, Oleg Samoylov, Daniel Wendler, C. Angioni, N. Arden, V. Artigues, M. Astrain, M. Balden, V. Bandaru, A. Banon Navarro, M. Bauer, A. Bergmann, M. Bergmann, M. Bernert, R. Bilato, G. Birkenmeier, V. Bobkov, A. Bock, L. Bock, T. Body, N. Bonanomi, B. Böswirth, A. Bottino, D. Brida, A. Buhler, A. Burckhart, P. Cano Megías, D. Carlton, A. Castillo Castillo, A. Chankin, G. Conway, D. Coster, P. David, P. de Marné, A. Di Siena, M. Dibon, M. Dunne, R. Dux, S. Elgeti, E. Fable, M. Faitsch, D. Fajardo Jimenez, U. Fantz, H. Faugel, R. Fischer, M. Fröschle, J. C. Fuchs, H. Fünfgelder, L. Giannone, O. Girka, T. Gleiter, S. Glöggler, J. C. Gonzalez, T. Görler, A. Gräter, G. Grenfell, H. Greuner, M. Griener, O. Grover, A. Gude, S. Günter, T. Happel, N. den Harder, T. Hayward-Schneider, B. Heinemann, P. Heinrich, A. Herrmann, J. Hobirk, M. Hölzl, C. Hopf, T. Höschen, K. Hunger, V. Igochine, J. Illerhaus, W. Jacob, N. Jaksic, F. Janky, F. Jenko, A. Kallenbach, J. Kalis, A. Kappatou, C.-P. Käsemann, M. Kircher, F. Klossek, M. Koleva, M. Krause, A. Kreuzeder, K. Krieger, O. Kudlacek, B. Kurzan, K. Lackner, P. T. Lang, P. Lauber, E. Lerche, O. Linder, Z. Lu, T. Luda di Cortemiglia, T. Lunt, T. Maceina, A. Magnanimo, H. Maier, O. Maj, A. Manhard, M. Maraschek, F. Matos, M. Mayer, R. McDermott, R. Merkel, M. Michelini, P. Molina Cabrera, M. Muraca, R. Neu, T. Nishizawa, I. Novikau, R. Ochoukov, O. Pan, G. Papp, G. Pautasso, M. Peglau, U. Plank, B. Plöckl, E. Poli, J. Puchmayr, T. Pütterich, G. Raupp, M. Reich, M. Reisner, B. Rettino, T. Ribeiro, R. Riedl, J. Riesch, V. Rohde, M. Rott, F. Ryter, O. Samoylov, G. Schall, A. Schlüter, K. Schmid, P. A. Schneider, M. Schubert, C. Schuster, T. Schwarz-Selinger, J. Schweinzer, F. Sciortino, O. Seibold-Benjak, M. Siccinio, B. Sieglin, A. Sigalov, D. Silvagni, M. Spacek, A. Stegmeir, D. Stieglitz, J. Stober, U. Stroth, E. Strumberger, W. Suttrop, B. Tál, G. Tardini, M. Teschke, W. Tierens, D. Told, W. Treutterer, P. Ulbl, G. Urbanczyk, M. Usoltseva, F. Vannini, T. Vierle, G. Vogel, U. von Toussaint, D. Wagner, X. Wang, M. Weiland, D. Wendler, M. Willensdorfer, B. Wiringer, M. Wischmeier, E. Wolfrum, Q. Yu, I. Zammuto, T. Zehetbauer, W. Zholobenko, M. Zilker, B. Zimmermann, A. Zito & H. Zohm // Oak Ridge National Laboratory, Oak Ridge, TN, USA: Mark Cianciosa // Columbia University, New York, NY, USA: Nils Leuthold, N. Leuthold & C. Paz-Soldan // ITER Organization, Saint-Paul-lèz-Durance, France: Guillermo Suárez López, A. Encheva, S. Jachmich, M. Lehnen, G. Suarez Lopez & S. Vanmulders // Physics Department, TUM School of Natural Sciences, Technical University of Munich, Garching, Germany: Daniel Wendler, S. Glöggler, F. Hitzler, U. Stroth & D. Wendler // Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal: D. Aguiam, J. Bernardo, P. Carvalho, R. Coelho, A. Figueredo, L. Gil, L. Guimarais, D. Hachmeister, F. Nabais, V. Plyusnin, J. Santos, E. Seliunin, A. Silva, C. Silva, P. Varela & J. Vicente // ENEA, IFP-CNR, Milan, Italy: E. Alessi, G. Croci, S. Garavaglia, G. Granucci, A. Mancini, P. Mantica, S. Nowak, D. Ricci, C. Sozzi & M. Tardocchi // Department of Applied Physics, Aalto University, Espoo, Finland: O. Asunta, M. Groth, J. Karhunen, T. Kurki-Suonio, A. Lahtinen, I. Paradela Perez, A. Salmi, S. Sipilä & A. Snicker // Léonard de Vinci Pôle Universitaire Research Center, Paris, France: A. Biancalani // MIT Plasma Science and Fusion Center, Cambridge, MA, USA: R. Bielajew, A. Hubbard, P. Rodriguez-Fernandez, B. Vanovac, A. E. White & C. Yoo // Eindhoven University of Technology, Eindhoven, the Netherlands: T. Blanken, H. van den Brand, M. de Baar, M. Kantor, E. Maljaars, G. Ronchi & J. Scholte // Consorzio RFX, Padova, Italy: T. Bolzonella, C. Cazzaniga, R. Delogu, M. Gobbin, L. Marrelli, P. Martin, C. Piron, G. Spizzo, M. Spolaore, D. Terranova, G. Trevisan, M. Valisa & N. Vianello // Princeton Plasma Physics Laboratory, Princeton, NJ, USA: A. Bortolon, F. Laggner, R. Maingi & R. Nazikian // CEA/IRFM, Saint-Paul-lèz-Durance, France: C. Bottereau, F. Clairet, L. Colas, A. Gallo & E. Joffrin // Forschungszentrum Jülich, Jülich, Germany: M. Brenzke, S. Brezinsek, J. W. Coenen, P. Denner, Y. Gao, A. Huber, A. Krämer-Flecken, L. Li, D. Reiser & D. Reiter // Institut Jean Lamour, Université de Lorraine, Nancy, France: F. Brochard, S. Heuraux & A. Houben // CCFE, Culham Science Centre, Abingdon, UK: J. Buchanan, M. Carr, C. Challis, C. Ham, J. Harrison, S. Henderson, A. Kirk, J. Mailloux, M.-L. Mayoral, H. Meyer, D. A. Ryan, S. Saarelma, S. Sharapov, J. Simpson, M. Valovic & I. Voitsekhovitch // Aix-Marseille University, CNRS, Marseille, France: Y. Camenen // Department of Electrical and Electronic Engineering, University of Cagliari, Cagliari, Italy: B. Cannas & G. Sias // ENEA, Centro Ricerche Frascati, Frascati, Italy: C. Castaldo, C. Cianfarani, B. Esposito, E. Giovannozzi & G. Rocchi // ENEA, University of Milano-Bicocca, Milano, Italy: M. Cavedon, A. Dal Molin, G. Gorini & M. Nocente // Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland: A. Chomiczewska, K. Galazka, I. Ivanova-Stanik & R. Zagorski // Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, Lausanne, Switzerland: S. Coda, B. P. Duval, F. Felici, T. Goodman, M. Kong, B. Labit, A. Merle, A. Pau, L. Porte, O. Sauter, A. Shalpegin, U. Sheikh & C. Sommariva // ÖAW, IAP, University of Innsbruck, Innsbruck, Austria: S. Costea, C. Ionita-Schrittwieser, A. Kendl & R. Schrittwieser // University of Wisconsin, Madison, WI, USA: T. Cote, B. Geiger & O. Schmitz // CFS, Fort Devens, MA, USA: A. J. Creely & T. Eich // Universidad de Sevilla, Sevilla, Spain: D. J. Cruz Zabala, J. J. Dominguez Palacios Durán, J. Galdon-Quiroga, M. Garcia Muñoz, J. Gonzalez Martin, A. Jansen van Vuuren, P. Oyola, J. F. Rivero Rodriguez, L. Sanchis Sanchez & E. Viezzer // Centre for Energy Research, Budapest, Hungary: G. Cseh, D. Dunai, G. Kocsis, G. Pokol, D. Réfy, T. Szepesi & S. Zoletnik // York Plasma Institute, University of York, York, UK: I. Cziegler, L. Horvath & B. Lipschultz // ENEA Consorzio CREATE, Naples, Italy: O. D’Arcangelo // Karlsruhe Institut für Technologie, Karlsruhe, Germany: C. Day, V. Hauer & S. Varoutis // Institute of Plasma Physics, National Science Center Kharkov Institute of Physics and Technology, Krakov, Ukraine: M. Dreval // Institute of Plasma Physics of the CAS, Praha, Czech Republic: M. Farnik, O. Ficker, F. Jaulmes & M. Komm // Max-Planck-Institut für Plasmaphysik, Greifswald, Germany: O. Ford, G. Fuchert, D. Gradic, K. Höfler, D. Kulla, F. Reimold & R. Wolf // KTH Royal Institute of Technology, Stockholm, Sweden: L. Frassinetti, P. Petersson, S. Ratynskaia, M. Rubel & E. Thorén // Barcelona Supercomputing Center, Barcelona, Spain: S. Futatani, D. Gallart Escolà & M. Mantsinen // Department of Physics, Durham University, Durham, UK: S. Gibson // VTT Technical Research Centre of Finland, Espoo, Finland: A. H. Hakola, J. Likonen & T. Tala // ÖAW, IAP, Vienna University of Technology, Vienna, Austria: G. Harrer, W. Kernbichler, P. Lainer, M. Markl & L. Radovanovic // General Atomics, San Diego, CA, USA: T. Hellsten, Y. Liu & M. van Zeeland // Laboratoire de Physique des Plasmas, Ecole Polytechnique, Palaiseau, France: P. Hennequin // ÖAW, Graz University of Technology, Graz, Austria: E. Heyn & S. Kasilov // Department of Physics, Technical University of Denmark, Lyngby, Denmark: J. H. Holm, T. Jensen, S. Kjer Hansen, J. Madsen, V. Naulin, R. D. Nem, A. H. Nielsen, S. K. Nielsen, J. Olsen, J. Rasmussen, M. Salewski, M. Stejner & T. Verdier // Ioffe Institute, St. Petersburg, Russian Federation: M. Iliasova, E. Khilkevitch & A. Shevelev // Department of Physics, Chalmers University of Technology, Gothenburg, Sweden: K. Insulander Björk // ERM/KMS, Brussels, Belgium: Y. Kazakov, A. Lyssoivan, V. Maquet, M. Tripský & G. Verdoolaege // Ghent University, Ghent, Belgium: V. Klevarova, A. Shabbir & G. Verdoolaege // Electrical and Computer Engineering, University of California, Davis, CA, USA: N. C. Luhmann // ICREA, Barcelona, Spain: M. Mantsinen // Universität Greifswald, Greifswald, Germany: P. Manz // ISC-CNR, Politecnico di Torino, Turin, Italy: C. Marchetto & D. Milanesio // School of Physics, University College Cork, Cork, Ireland: P. J. McCarthy // Technische Universität München, Garching, Germany: R. Neu // Department of Industrial Engineering, University of Rome, Rome, Italy: E. Peluso // IGVP Universität Stuttgart, Stuttgart, Germany: B. Plaum & M. Ramisch // Budapest University of Technology and Economics, Budapest, Hungary: G. Pokol // Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain: G. Ratta & E. Solano // Universitá degli Studi della Tuscia, DEIM Department, Viterbo, Italy: A. Redl // Chinese Academy of Sciences, Hefei, China: Q. Yang & W. Zhang // Consortia the ASDEX Upgrade Team: D. Aguiam, E. Alessi, C. Angioni, N. Arden, V. Artigues, M. Astrain, O. Asunta, M. Balden, V. Bandaru, A. Banon Navarro, M. Bauer, A. Bergmann, M. Bergmann, J. Bernardo, M. Bernert, A. Biancalani, R. Bielajew, R. Bilato, G. Birkenmeier, T. Blanken, V. Bobkov, A. Bock, L. Bock, T. Body, T. Bolzonella, N. Bonanomi, A. Bortolon, B. Böswirth, C. Bottereau, A. Bottino, H. van den Brand, M. Brenzke, S. Brezinsek, D. Brida, F. Brochard, J. Buchanan, A. Buhler, A. Burckhart, Y. Camenen, B. Cannas, P. Cano Megías, D. Carlton, M. Carr, P. Carvalho, C. Castaldo, A. Castillo Castillo, M. Cavedon, C. Cazzaniga, C. Challis, A. Chankin, A. Chomiczewska, C. Cianfarani, F. Clairet, S. Coda, R. Coelho, J. W. Coenen, L. Colas, G. Conway, S. Costea, D. Coster, T. Cote, A. J. Creely, G. Croci, D. J. Cruz Zabala, G. Cseh, I. Cziegler, O. D’Arcangelo, A. Dal Molin, P. David, C. Day, M. de Baar, P. de Marné, R. Delogu, P. Denner, A. Di Siena, M. Dibon, J. J. Dominguez Palacios Durán, D. Dunai, M. Dreval, M. Dunne, B. P. Duval, R. Dux, T. Eich, S. Elgeti, A. Encheva, B. Esposito, E. Fable, M. Faitsch, D. Fajardo Jimenez, U. Fantz, M. Farnik, H. Faugel, F. Felici, O. Ficker, A. Figueredo, R. Fischer, O. Ford, L. Frassinetti, M. Fröschle, G. Fuchert, J. C. Fuchs, H. Fünfgelder, S. Futatani, K. Galazka, J. Galdon-Quiroga, D. Gallart Escolà, A. Gallo, Y. Gao, S. Garavaglia, M. Garcia Muñoz, B. Geiger, L. Giannone, S. Gibson, L. Gil, E. Giovannozzi, O. Girka, T. Gleiter, S. Glöggler, M. Gobbin, J. C. Gonzalez, J. Gonzalez Martin, T. Goodman, G. Gorini, T. Görler, D. Gradic, G. Granucci, A. Gräter, G. Grenfell, H. Greuner, M. Griener, M. Groth, O. Grover, A. Gude, L. Guimarais, S. Günter, D. Hachmeister, A. H. Hakola, C. Ham, T. Happel, N. den Harder, G. Harrer, J. Harrison, V. Hauer, T. Hayward-Schneider, B. Heinemann, P. Heinrich, T. Hellsten, S. Henderson, P. Hennequin, S. Heuraux, A. Herrmann, E. Heyn, F. Hitzler, J. Hobirk, K. Höfler, J. H. Holm, M. Hölzl, C. Hopf, L. Horvath, T. Höschen, A. Houben, A. Hubbard, A. Huber, K. Hunger, V. Igochine, M. Iliasova, J. Illerhaus, K. Insulander Björk, C. Ionita-Schrittwieser, I. Ivanova-Stanik, S. Jachmich, W. Jacob, N. Jaksic, F. Janky, A. Jansen van Vuuren, F. Jaulmes, F. Jenko, T. Jensen, E. Joffrin, A. Kallenbach, J. Kalis, M. Kantor, A. Kappatou, J. Karhunen, C.-P. Käsemann, S. Kasilov, Y. Kazakov, A. Kendl, W. Kernbichler, E. Khilkevitch, M. Kircher, A. Kirk, S. Kjer Hansen, V. Klevarova, F. Klossek, G. Kocsis, M. Koleva, M. Komm, M. Kong, A. Krämer-Flecken, M. Krause, A. Kreuzeder, K. Krieger, O. Kudlacek, D. Kulla, T. Kurki-Suonio, B. Kurzan, B. Labit, K. Lackner, F. Laggner, A. Lahtinen, P. Lainer, P. T. Lang, P. Lauber, M. Lehnen, E. Lerche, N. Leuthold, L. Li, J. Likonen, O. Linder, B. Lipschultz, Y. Liu, Z. Lu, T. Luda di Cortemiglia, N. C. Luhmann, T. Lunt, A. Lyssoivan, T. Maceina, J. Madsen, A. Magnanimo, H. Maier, J. Mailloux, R. Maingi, O. Maj, E. Maljaars, V. Maquet, A. Mancini, A. Manhard, P. Mantica, M. Mantsinen, P. Manz, M. Maraschek, C. Marchetto, M. Markl, L. Marrelli, P. Martin, F. Matos, M. Mayer, M.-L. Mayoral, P. J. McCarthy, R. McDermott, R. Merkel, A. Merle, H. Meyer, M. Michelini, D. Milanesio, P. Molina Cabrera, M. Muraca, F. Nabais, V. Naulin, R. Nazikian, R. D. Nem, R. Neu, A. H. Nielsen, S. K. Nielsen, T. Nishizawa, M. Nocente, I. Novikau, S. Nowak, R. Ochoukov, J. Olsen, P. Oyola, O. Pan, G. Papp, I. Paradela Perez, A. Pau, G. Pautasso, C. Paz-Soldan, M. Peglau, E. Peluso, P. Petersson, C. Piron, U. Plank, B. Plaum, B. Plöckl, V. Plyusnin, G. Pokol, E. Poli, L. Porte, J. Puchmayr, T. Pütterich, L. Radovanovic, M. Ramisch, J. Rasmussen, G. Ratta, S. Ratynskaia, G. Raupp, A. Redl, D. Réfy, M. Reich, F. Reimold, D. Reiser, M. Reisner, D. Reiter, B. Rettino, T. Ribeiro, D. Ricci, R. Riedl, J. Riesch, J. F. Rivero Rodriguez, G. Rocchi, P. Rodriguez-Fernandez, V. Rohde, G. Ronchi, M. Rott, M. Rubel, D. A. Ryan, F. Ryter, S. Saarelma, M. Salewski, A. Salmi, O. Samoylov, L. Sanchis Sanchez, J. Santos, O. Sauter, G. Schall, A. Schlüter, J. Scholte, K. Schmid, O. Schmitz, P. A. Schneider, R. Schrittwieser, M. Schubert, C. Schuster, T. Schwarz-Selinger, J. Schweinzer, F. Sciortino, O. Seibold-Benjak, E. Seliunin, A. Shabbir, A. Shalpegin, S. Sharapov, U. Sheikh, A. Shevelev, G. Sias, M. Siccinio, B. Sieglin, A. Sigalov, A. Silva, C. Silva, D. Silvagni, J. Simpson, S. Sipilä, A. Snicker, E. Solano, C. Sommariva, C. Sozzi, M. Spacek, G. Spizzo, M. Spolaore, A. Stegmeir, M. Stejner, D. Stieglitz, J. Stober, U. Stroth, E. Strumberger, G. Suarez Lopez, W. Suttrop, T. Szepesi, B. Tál, T. Tala, G. Tardini, M. Tardocchi, D. Terranova, M. Teschke, E. Thorén, W. Tierens, D. Told, W. Treutterer, G. Trevisan, M. Tripský, P. Ulbl, G. Urbanczyk, M. Usoltseva, M. Valisa, M. Valovic, M. van Zeeland, S. Vanmulders, F. Vannini, B. Vanovac, P. Varela, S. Varoutis, T. Verdier, G. Verdoolaege, N. Vianello, J. Vicente, T. Vierle, E. Viezzer, G. Vogel, I. Voitsekhovitch, U. von Toussaint, D. Wagner, X. Wang, M. Weiland, D. Wendler, A. E. White, M. Willensdorfer, B. Wiringer, M. Wischmeier, R. Wolf, E. Wolfrum, Q. Yang, C. Yoo, Q. Yu, R. Zagorski, I. Zammuto, T. Zehetbauer, W. Zhang, W. Zholobenko, M. Zilker, B. Zimmermann, A. Zito, H. Zohm & S. Zoletnik
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The thermodynamic stability of noble-gas bulk nanobubbles in a closed and finite volume of liquid metal

  • Al Awad, Abdulrahman|||0000-0002-5502-0207
  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Rives Sanz, Ronny|||0000-0002-9789-9926
  • Sedano Miguel, Luís A.
The existence and persistence of gas-filled bulk nanobubbles (bNBs) is usually puzzling, whether in nature or computer experiments using Molecular Dynamics (MD) methods, since the mechanical and chemical equilibrium conditions justifying their thermodynamic stability are rather vague. In the spirit of theories and experiments concerning microbubbles stability in closed and finite-volume systems, a theoretical perturbation approach of bNBs thermodynamic stability is revisited. Also, analogies with earlier theories are highlighted, and a novel counterpart computational framework is established. Under similar conditions and constraints of the system as theoretically hypothesized, a kinetic approach using classical MD to realize a proposed thermodynamically stable (or irreversible) state of bNBs is reviewed. Helium bNBs in liquid Pb17Li alloy is selected as case study, which fulfills the assumptions and approximations required by the theoretical approach that is mainly intended for noble-gas/liquid-metal systems. Several important static and dynamic properties of the system (and its components) are consistently estimated to facilitate analyses and discussions. Estimated pressure–volume relations of bNBs are used to analytically reconstruct the thermodynamic stable-state of bNBs, and agreement with results from the kinetic approach is shown. The influence of relevant properties and factors on the probed state are thoroughly discussed. It is concluded that while the theoretical perturbation is ideal, it is conservative and valid as long as the theoretical constraints and assumptions are fulfilled. Ultimately, this study resolves ambiguities about the influence of the simulation domain and time on the observed bNBs stability in computer experiments, and it relates Ward’s theory to CMD simulations., This work was partially funded by EUROfusion project (Grant Agreement No. 101052200) under Horizon Europe program. This work was granted access to HPC resources of EUROfusion High Performance Computer at CINECA (Marconi and Leonardo) under project FUA38., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Progress with applications of three-ion ICRF scenarios for fusion research: A review

  • Kazakov, Ye O.
  • Ongena, J.
  • Nocente, M.
  • Bobkov, Volodymyr
  • Garcia, J.
  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi J.
Proceedings of the 24TH TOPICAL CONFERENCE ON RADIO-FREQUENCY POWER IN PLASMAS 26–28 September 2022 Annapolis, USA, The viability of magnetic confinement fusion as an energy source depends on achieving the high ion temperatures required for D-T fusion. Among the available techniques, plasma heating with waves in the ion cyclotron range of frequencies (ICRF) is a prominent method for bulk ion heating in fusion plasmas. Furthermore, a detailed understanding of the non-linear physics of alpha heating and the complex impact of MeV-range fast ions on plasma dynamics becomes progressively more important. This paper provides a comprehensive overview of recent developments with the three-ion ICRF scenarios on Alcator C-Mod, ASDEX Upgrade and JET tokamaks. The results demonstrate the flexibility of these novel scenarios for heating bulk ions in D-T ≈ 50%-50% plasmas and efficient generation of MeV-range fast ions in multi-ion species plasmas. Several key results relevant for ITER and future fusion reactors are highlighted., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 – EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. We thank the ITPA Energetic Particle Physics Topical Group for its support. Part of this work was also carried out in the framework of projects done for the ITER Scientist Fellow Network (ISFN). ITER is the Nuclear Facility INB No. 174. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization. This publication is provided for scientific purposes only. Its contents should not be considered as commitments from the ITER Organization as a nuclear operator in the frame of the licensing process., Peer Reviewed, "Article signat per 78 autors/es: Ye. O. Kazakov; J. Ongena; M. Nocente; V. Bobkov; J. Garcia; V. G. Kiptily; M. Schneider; S. Wukitch; J. C. Wright; M. Dreval; K. K. Kirov; S. Mazzi; R. Ochoukov; S. E. Sharapov; Ž. Štancar; H. Weisen; Y. Baranov; M. Baruzzo; A. Bierwage; R. Bilato; A. Chomiczewska; R. Coelho; T. Craciunescu; K. Crombé; E. Delabie; E. de la Luna; R. Dumont; P. Dumortier; F. Durodié; J. Eriksson; M. Fitzgerald; J. Galdon-Quiroga; D. Gallart; M. Garcia-Munoz; L. Giacomelli; C. Giroud; J. Gonzalez-Martin; A. Hakola; R. Henriques; P. Jacquet; I. Jepu; T. Johnson; A. Kappatou; D. Keeling; D. King; C. Klepper; Ph. Lauber; M. Lennholm; E. Lerche; B. Lomanowski; C. Lowry; M. J. Mantsinen; M. Maslov; S. Menmuir; I. Monakhov; F. Nabais; M. F. F. Nave; C. Noble; E. Panontin; S. D. Pinches; A. R. Polevoi; D. Rigamonti; A. Sahlberg; M. Salewski; P. A. Schneider; H. Sheikh; K. Shinohara; P. Siren; S. Sumida; A. Thorman; R. A. Tinguely; D. Valcarcel; D. Van Eester; M. Van Schoor; J. Varje; M. Weiland; N. Wendler; JET Contributors, the ASDEX Upgrade Team and the EUROfusion MST1 Team"
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Progress with applications of three-ion ICRF scenarios for fusion research: A review

  • Kazakov, Ye O.
  • Ongena, J.
  • Nocente, M.
  • Bobkov, Volodymyr
  • Garcia, J.
  • Gallart, Daniel
  • Mantsinen, Mervi J.
Proceedings of the 24TH TOPICAL CONFERENCE ON RADIO-FREQUENCY POWER IN PLASMAS 26–28 September 2022 Annapolis, USA, The viability of magnetic confinement fusion as an energy source depends on achieving the high ion temperatures required for D-T fusion. Among the available techniques, plasma heating with waves in the ion cyclotron range of frequencies (ICRF) is a prominent method for bulk ion heating in fusion plasmas. Furthermore, a detailed understanding of the non-linear physics of alpha heating and the complex impact of MeV-range fast ions on plasma dynamics becomes progressively more important. This paper provides a comprehensive overview of recent developments with the three-ion ICRF scenarios on Alcator C-Mod, ASDEX Upgrade and JET tokamaks. The results demonstrate the flexibility of these novel scenarios for heating bulk ions in D-T ≈ 50%-50% plasmas and efficient generation of MeV-range fast ions in multi-ion species plasmas. Several key results relevant for ITER and future fusion reactors are highlighted., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 – EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. We thank the ITPA Energetic Particle Physics Topical Group for its support. Part of this work was also carried out in the framework of projects done for the ITER Scientist Fellow Network (ISFN). ITER is the Nuclear Facility INB No. 174. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization. This publication is provided for scientific purposes only. Its contents should not be considered as commitments from the ITER Organization as a nuclear operator in the frame of the licensing process., Peer Reviewed, "Article signat per 78 autors/es: Ye. O. Kazakov; J. Ongena; M. Nocente; V. Bobkov; J. Garcia; V. G. Kiptily; M. Schneider; S. Wukitch; J. C. Wright; M. Dreval; K. K. Kirov; S. Mazzi; R. Ochoukov; S. E. Sharapov; Ž. Štancar; H. Weisen; Y. Baranov; M. Baruzzo; A. Bierwage; R. Bilato; A. Chomiczewska; R. Coelho; T. Craciunescu; K. Crombé; E. Delabie; E. de la Luna; R. Dumont; P. Dumortier; F. Durodié; J. Eriksson; M. Fitzgerald; J. Galdon-Quiroga; D. Gallart; M. Garcia-Munoz; L. Giacomelli; C. Giroud; J. Gonzalez-Martin; A. Hakola; R. Henriques; P. Jacquet; I. Jepu; T. Johnson; A. Kappatou; D. Keeling; D. King; C. Klepper; Ph. Lauber; M. Lennholm; E. Lerche; B. Lomanowski; C. Lowry; M. J. Mantsinen; M. Maslov; S. Menmuir; I. Monakhov; F. Nabais; M. F. F. Nave; C. Noble; E. Panontin; S. D. Pinches; A. R. Polevoi; D. Rigamonti; A. Sahlberg; M. Salewski; P. A. Schneider; H. Sheikh; K. Shinohara; P. Siren; S. Sumida; A. Thorman; R. A. Tinguely; D. Valcarcel; D. Van Eester; M. Van Schoor; J. Varje; M. Weiland; N. Wendler; JET Contributors, the ASDEX Upgrade Team and the EUROfusion MST1 Team", Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Detection of alpha heating in JET-ILW DT plasmas by a study of the electron temperature response to ICRH modulation

  • Mantica, Paola
  • Auriemma, Fulvio
  • Casiraghi, I.
  • Gallart, Daniel
  • Kirov, K.
  • Mantsinen, Mervi M.
In the JET DTE2 campaign a new method was successfully tested to detect the heating of bulk electrons by α-particles, using the dynamic response of the electron temperature T e to the modulation of ion cyclotron resonance heating (ICRH). A fundamental deuterium (D) ICRH scheme was applied to a tritium-rich hybrid plasma with D-neutral beam injection (NBI). The modulation of the ion temperature T i and of the ICRH accelerated deuterons leads to modulated α-heating with a large delay with respect to other modulated electron heating terms. A significant phase delay of ∼40° is measured between central T e and T i, which can only be explained by α-particle heating. Integrated modelling using different models for ICRH absorption and ICRH/NBI interaction reproduces the effect qualitatively. Best agreement with experiment is obtained with the European Transport Solver/Heating and Current Drive workflow., This work was carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The BSC part of this work are grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya via the Research Group Fusion Group with code: 2021 SGR 00908., Peer Reviewed, "Article signat per 31 autors/es: P. Mantica, F. Auriemma, I. Casiraghi, D. Gallart, K. Kirov, E. Lerche, A. Salmi, A. Dal Molin, E. Delabie, J. Eriksson, J. Garcia, P. Huynh, P. Jacquet, T. Jonsson, V. Kiptily, E. Litherland–Smith, C.F. Maggi, M. Mantsinen, G. Marcer, M. Maslov, S. Menmuir, M. Nocente, E. Peluso, G. Pucella, D. Rigamonti, Z. Stancar, H. Sun, G. Szepesi, M. Tardocchi, D. Van Eester and JET Contributors", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Molecular dynamics simulations of helium nucleation in liquid lead-lithium alloys

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

  • Hobirk, Jörg
  • Challis, C.D.
  • Kappatou, Athina
  • Lerche, E.
  • Keeling, D.
  • Gallart, Daniel
  • Mantsinen, Mervi M.
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challenges arising from 37 MW of injected power in the ITER like wall environment, keeping the radiation in the edge and core controlled, avoiding MHD instabilities and reaching high neutron rates. The Deuterium hybrid plasmas have been re-run in Tritium and methods have been found to keep the radiation controlled but not at high fusion performance probably due to time constraints. For the first time this scenario has been run in Deuterium-Tritium (50:50). These plasmas were re-optimised to have a radiation-stable H-mode entry phase, good impurity control through edge Ti gradient screening and optimised performance with fusion power exceeding 10 MW for longer than three alpha particle slow down times, 8.3 MW averaged over 5 s and fusion energy of 45.8 MJ., The BSC part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 and the CIEMAT part through grant PID2021-127727OB-I00, funded through MCIN/AEI/10.13039/501100011033 and ERDF "A way of making Europe". This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called 'PMW' for 2018–2023. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200 - EUROfusion) and from the EPSRC [Grant Number EP/W006839/1]. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the ITER organization., Peer Reviewed, "Article signat per més de 50 autors/es:" J. Hobirk, C.D. Challis, A. Kappatou, E. Lerche, D. Keeling, D. King, S. Aleiferis, E. Alessi, C. Angioni, F. Auriemma, M. Baruzzo, É. Belonohy, J. Bernardo, A. Boboc, I.S. Carvalho, P. Carvalho, F.J. Casson, A. Chomiczewska, J. Citrin, I.H. Coffey, N.J. Conway, D. Douai, E. Delabie, B. Eriksson, J. Eriksson, O. Ficker, A.R. Field, M. Fontana, J.M. Fontdecaba, L. Frassinetti, D. Frigione, D. Gallart, J. Garcia, M. Gelfusa, Z. Ghani, L. Giacomelli, E. Giovannozzi, C. Giroud, M. Goniche, W. Gromelski, S. Hacquin, C. Ham, N.C. Hawke, R.B. Henriques, J.C. Hillesheim, A. Ho, L. Horvath, I. Ivanova-Stanik, P. Jacquet, F. Jaulmes, E. Joffrin, H.T. Kim, V. Kiptily, K. Kirov, D. Kos, E. Kowalska-Strzeciwilk11, H. Kumpulainen24, K. Lawson2, M. Lennholm2,25, X. Litaudon14, E. Litherland-Smith2, P.J. Lomas, E. de la Luna, C.F. Maggi, J. Mailloux, M.J. Mantsinen, M. Maslov, G. Matthews, K.G. McClements, A.G. Meigs, S. Menmuir, A. Milocco, I.G. Miron, S. Moradi, R.B. Morales, S. Nowak, F. Orsitto, A. Patel, L. Piron, C. Prince, G. Pucella, E. Peluso, C. Perez von Thun, E. Rachlew, C. Reux, F. Rimini, S. Saarelma, P. A Schneider, S. Scully, M. Sertoli, S. Sharapov, A. Shaw, S. Silburn, A. Sips, P. Siren, C. Sozzi, E.R. Solano, Z. Stancar, G. Stankunas, C. Stuart, H.J. Sun, G. Szepesi, D. Valcarcel, M. Valisa, G. Verdoolaege, B. Viola, N. Wendler, M. Zerbini and JET Contributors", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stochastic computer experiments of the thermodynamic irreversibility of bulk nanobubbles in supersaturated and weak gas-liquid solutions

  • Al Awad, Abdulrahman
  • Batet Miracle, Lluís
  • Rives Sanz, Ronny
  • Sedano, Luis
Spontaneous gas-bubble nucleation in weak gas-liquid solutions has been a challenging topic in theory, experimentation, and computer simulations. In analogy with recent advances in crystallization and droplet formation studies, the diffusive-shielding stabilization and thermodynamic irreversibility of bNBs mechanisms are revisited and deployed to characterize nucleation processes in a stochastic framework of computer experiments using LAMMPS code. Theoretical bases, assumptions and limitations underlying the irreversibility hypothesis of bNBs, and their computational counterparts, are extensively described and illustrated. In essence, it is established that the irreversibility hypothesis can be numerically investigated by converging the system volume (due to the finiteness of interatomic forces) and the initial dissolved-gas concentration in the solution (due to the single-bNB limitation). Helium nucleation in liquid Pb17Li alloy is selected as a representative case study, where it exhibits typical characteristics of NG/LM systems. The proposed framework lays down the bases on which stability of gas-bNBs in weak and supersaturated gas-liquid solutions can be inferred and explained from a novel perspective. In essence, it stochastically marches towards a unique irreversible state along out-of-equilibrium nucleation/growth trajectories. Moreover, it does not attempt to characterize the interface or any interface related properties, neither theoretically nor computationally. It was concluded that bNBs of a few tens of He-atoms are irreversible when dissolved-He concentrations in the weak gas-liquid solution are at least ~ 50 mol.m^-3 and ~ 105 mol.m^-3 at 600 K and 1000 K (and ~ 80 MPa), respectively, whereas CMD-estimated solubilities are at least two orders of magnitude smaller., We thank E. Alvarez-Galera and Professor J. Marti for providing the helium solubility estimations for the deployed potentials. A.S.A. is a holder of AGAUR-FI ajuts (Grant No. 2023 FI-3) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This work was partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe program. This work was granted access to the HPC resources of the EUROfusion High Performance Computer at CINECA (Marconi-Fusion) under the project FUA37., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Advanced Computing Hub at BSC: Improving fusion codes following modern software engineering standards

  • Saez Pous, Xavier
  • Soba, Alejandro
  • Vinyals Ylla Català, Joan
  • Saxena, Gaurav
  • Garcia Gasulla, Marta
  • Morales, Cristian
  • Vicente Dorca, David
  • Mantsinen, Mervi
Several dedicated High-Performance Computing (HPC) centers provide essential expertise and support in developing a suitable portfolio of EUROfusion standard codes. Barcelona Supercomputing Center (BSC) is one of these HPC hubs involved in this complex task. Several fusion codes were selected, installed and analyzed to meet the developers' requirements, ranging from portability to GPU, improving the performance, getting better data management, extending the capacity of coupling with other codes, etc. In this paper, we will describe the work developed by BSC and some of the tasks carried out in this project. We will explain briefly how the project is faced and the work required to create good quality codes, i.e. robust and trustable software capable of running efficiently in modern HPC systems., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Program (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The research group Fusion Group at Barcelona Supercomputing Center is grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya with code 2021 SGR 00908, and from the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033. This work was supported by the Ministry of Education, Youth and Sports of the Czech Republic through the e-INFRA CZ (ID:90254)., Peer Reviewed, "Article signat per 12 autors/es: Xavier Sáez, Alejandro Soba, Joan Vinyals Ylla Català, Gaurav Saxena, Marta Garcia Gasulla, Cristian Morales, David Vicente Dorca, Michael Komm, Ales Podolnik, Juri Romazanov, Edilberto Sanchez, Jose Luis Velasco and Mervi Mantsinen", Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of RF waves – fast NBI ions interaction on the fusion performance in JET DTE2 campaign

  • Kirov, Krassimir K
  • Challis, Clive D
  • la Luna, Elena de
  • Eriksson, Jacob
  • Gallart, Daniel
  • Mantsinen, Mervi
This work studies the interaction between Radio Frequency (RF) waves used for Ion Cyclotron Resonance Heating (ICRH) and the fast Deuterium (D) and Tritium (T) Neutral Beam Injected (NBI) ions in DT plasma. The focus is on the effect of this interaction, also referred to as synergistic effects, on the fusion performance in the recent JET DTE2 campaign. Experimental data from dedicated pulses at 3.43T/2.3MA heated at (i) 51.4MHz giving central minority H and n=2 D and at (ii) 32.2MHz for central minority 3He and n=2 T resonances were analyzed and conclusions were drawn and supported by modelling of the synergistic effects. TRANSP runs with and without RF kick operator predicted moderate increase, about 10%, in DT rates for the case of RF wave - fast D NBI ions interactions at n=2 harmonic of ion cyclotron resonance and negligible impact by synergistic interaction between fast T NBI ions and RF waves. JETTO modelling gives 29% enhancement of fusion rates due to RF waves – fast D NBI ions interaction and 18% enhancement for fast T NBI ions. Analysis of experimental neutron rates compared to TRANSP predictions without synergistic effects and Magnetic Proton Recoil (MPRu) neutron spectrometer indicate approximately 25-28% enhancement of fusion rates due to RF interaction with fast D ions and approximately 5-8% when RF wave – fast T NBI ions interaction is taking place. Contribution of various heating and fast ion sources have been assessed and discussed. }, This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion) and from the EPSRC [grant number EP/W006839/1]. To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.uk . Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them., Peer Reviewed, "Article signat per 23 autors/es: Krassimir K Kirov, Clive D Challis, Elena de la Luna, Jacob Eriksson, Daniel Gallart, Jeronimo Garcia, Marina Gorelenkova, Joerg Hobirk, Philippe Jacquet, Athina Kappatou, Yevgen Kazakov, David Keeling, Damian King, Ernesto A Lerche, Costanza F Maggi, Joelle Mailloux, Paola Mantica, Mervi Mantsinen, Mikhail Maslov, Sheena Menmuir, Paula Sirén, Žiga Štancar and Dirk Van Eester", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The centrifuge of the Pellet Launching System for JT-60SA: initial test results

  • Ploeckl, Bernhard
  • Canchado, Manuel
  • Casalta, Joan Manel
  • Casamor Martinell, Oriol
  • Cavinato, Mario
  • Hajnal, Nandor
  • Lang, Peter
  • Martínez, Jordi
  • Nakamura, Shin
  • Olivella Martí, Guillem
  • Phillips, Guy
  • Toledo Romera, Rudolfo
  • Tretter, Joerg
  • Yamamoto, Shunya
Part of the Broader Approach, JT-60SA was established as satellite experiment supporting ITER and paving the way for a future fusion power plant. Its research plan calls for a powerful Pellet Launching System (PLS), capable for both particle fuelling and ELM pacing. These different tasks are achieved simultaneously by combining a pellet source for each purpose on a centrifuge. This stop cylinder type centrifuge provides dedicated pellet launch slots, which can be filled by the pellet sources controlled by a master programmable logic control (MasterPLC) system. Previously, centrifuges like those used at ASDEX Upgrade and JET were built by modifying a large turbomolecular pump and adding an acceleration arm. The advanced novel system reported here takes an approach that separates the drive from the arm. A ferrofluidic rotary motion feedthrough, capable of speeds up to 166 Hz, transfers the rotary motion from a commercial servomotor operating in the atmosphere to a rotor blade in the high vacuum. This system is designed to launch pellets with a velocity of up to 600 m/s when the centrifuge is rotating at 120 Hz. The factory acceptance test has almost been passed. After passing the endurance test, the system will be delivered to IPP Garching, followed by a commissioning phase in the pellet lab., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of fusion alphas interaction with RF waves in D-T plasma at JET

  • Kirov, Krassimir K
  • Auriemma, Fulvio
  • Bonofiglo, Phillip
  • Challis, Clive D
  • de la Luna, Elena
  • Gallart, Daniel
  • Mantsinen, Mervi M.
This work studies the influence of RF waves in ICRH range of frequency on fusion alphas during the recent JET D-T campaign. Fusion alphas from D-T reactions are born with energies of about 3.5MeV and therefore have significant Doppler shift enabling synergistic interaction between them and RF waves at broad range of frequencies including the ones foreseen for future fusion machines ITER and SPARC. Resonant interaction between RF waves and alphas, also called synergistic effects, will modify the alpha distribution and ultimately will have an impact on alpha orbit losses and heating. Data from JET 3.43T/2.3MA pulses based on the hybrid scenario during the DTE2 campaign were used for the analysis in this study. The impact of synergistic effects on alpha orbit losses and alpha heating is assessed. Conclusions are based on analysis of experimental data for fast alphas losses, i.e. measurements from neutral particle analyser, fast ion losses scintillator detector, Faraday cups, and TRANSP simulations. Experimental data and TRANSP analysis indicate that there are indeed changes in the alphas’ distribution function due to interaction with RF waves. Data from the scintillator detector and the Faraday cups were compared for pulses with and without ICRH power and versus cases with enhanced alpha losses due to MHD activities. The trends from these diagnostics consistently show no additional alpha losses due to interaction with RF waves. TRANSP predictions for the impact of the synergistic effects on alpha heating show up to 42% increase in alpha electron heating and up to 25% increase in alpha ion heating. These effects however become negligibly small, less than 1%, when alpha heating is compared to the total auxiliary hearting power in the investigated JET pulses., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them., Peer Reviewed, "Article signat per 27 autors/es: Krassimir K Kirov, Fulvio Auriemma, Phillip Bonofiglo, Clive D Challis, Elena de la Luna, Jacob Eriksson, Daniel Gallart, Jeronimo Garcia, Marina Gorelenkova, Joerg Hobirk, Philippe Jacquet, Athina Kappatou, Yevgen Kazakov, David Keeling, Damian King, Vasily Kiptily, Ernesto A Lerche, Costanza F Maggi, Joelle Mailloux, Paola Mantica, Mervi Mantsinen, Mikhail Maslov, Sheena Menmuir, Ridhima Sharma, Paula Sirén, Žiga Štancar and Dirk Van Eester", Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observation of alpha-particles in recent D–T experiments on JET

  • Kiptily, Vasily
  • Challis, C.D.
  • Dumont, Remi
  • Fitzgerald, M.
  • Garcia, Jeronimo
  • Mantsinen, Mervi J.
The fusion reaction between deuterium and tritium, D(T,n)4He is the main source of energy in future thermonuclear reactors. Alpha-particles (4He-ions) born with an average energy of 3.5 MeV transferring energy to the thermal plasma during their slowing down, should provide the self-sustained D–T plasma burn. The adequate confinement of α-particles is essential to provide efficient heating of the bulk plasma and steady burning of a reactor plasma. That is why the fusion-born α-particle studies have been a priority task in the second D–T experiments (DTE2) on the Joint European Torus (JET) to understand the main mechanisms of their slowing down, redistribution and losses and to develop optimal plasma scenarios. JET with Be-wall and W-divertor, enhanced auxiliary heating systems and improved energetic-particle diagnostic capabilities, producing significant population of α-particles, provided the possibility for comprehensive studying of the α-particle behaviour. Selected results of the confined and lost α-particle measurements, evidence of α-particle self-heating and assessments of the fusion performance are presented in this paper giving an opportunity for further modelling and extrapolation to the International Thermonuclear Experimental Reactor and burning plasma reactors., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200—EUROfusion) and from the RCUK Energy Programme (Grant Number EP/W006839/1). Also, this work partially supported by the U.S. Department of Energy under Contract Number DE-AC02-09CH11466, by the Polish Ministry of Science and Higher Education within the programme 'PMW' for 2022-2023, by the Grants FIS2017-85252-R and PID2021-127727OB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and ERDF 'A way of making Europe'. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.u, Peer Reviewed, "Article signat per 50 autors/es: V.G. Kiptily, C.D. Challis, R. Dumont, M. Fitzgerald, J. Garcia, L. Garzotti, Z. Ghani, J. Hobirk, P. Jacquet, A. Kappatou, D. Keeling, Ye. Kazakov, P. Mantica, M.J. Mantsinen, S.E. Sharapov, E.R. Solano, D. Van Eester, P.J. Bonofiglo, T. Craciunescu, A. Dal Molin, J. Eriksson, V. Goloborodko, M.V. Iliasova, E.M. Khilkevitch, D. King, I. Lengar, M. Nocente, S. Menmuir, M. Podestà, M. Poradzinski, D. Rigamonti, J. Rivero-Rodriguez, Z. Stancar, A.E. Shevelev, P. Siren, H. Sun, D.M. Taylor, M. Tardocchi, P. Beaumont, F. Belli, F.E. Cecil, R. Coelho, M. Curuia, M. Garcia-Munoz, E. Joffrin, C. Lowry, M. Lennholm, E. Lerche, C.F. Maggi, J. Mailloux, D. Marocco, M. Maslov, C. Perez Von Thun, F. Rimini, V. Zoita and JET Contributors", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical investigation of 3D MHD pressure drop in a prototypical fusion blanket manifold using OpenFOAM

  • Rives Sanz, Ronny
  • Batet Miracle, Lluís
Reliable prediction of magnetohydrodynamic (MHD) pressure losses in liquid-metal breeding blankets is essential for DEMO reactor design. In the European Dual Coolant Lead–Lithium (EU-DCLL) concept, manifold expansions and contractions are expected to dominate the total pressure drop. This work investigates the three-dimensional (3D) MHD pressure drop associated with a sudden expansion representative of the EU-DCLL bottom manifold, using a customized OpenFOAM solver. The solver is validated against analytical solutions and benchmark numerical codes, demonstrating superior stability and mesh efficiency. A set of 45 simulations is conducted for expansion ratios 4–8, Hartmann numbers 1000–5000, and Reynolds numbers 50–2000, spanning the viscous–electromagnetic (VE), inertial–electromagnetic (IE), and intermediate (IVE) regimes. The results reveal complex 3D current loops and flow reversals at high Hartmann numbers. Building on the Rhodes et al. (2018) formulation, we propose a modified correlation with a finite asymptotic term, applicable across VE, IVE, and IE regimes. The new model captures the numerical database with excellent accuracy (R^2 = 0.9914, RMSE = 0.0021) and predicts a 3D MHD pressure drop of ¿P3D = 1.50 kPa under EU-DCLL operating conditions. These findings improve the theoretical consistency of MHD pressure-loss modeling and support manifold optimization for future DEMO blanket designs., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. This work was granted access to the EUROfusion High Performance Computer facilities at CINECA (Marconi and Leonardo clusters) under projects FUA37 and FUA38. The authors gratefully acknowledge the DCLL rear-circuit data provided by F. R. Urgorri and I. Fernández (CIEMAT), as well as their valuable comments on the MHD pressure-drop calculations for the EU-DCLL blanket., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The role of isotope mass and transport for H-mode access in tritium containing plasmas at JET with ITER-like wall

  • Birkenmeier, Gregor
  • Solano, Emilia R
  • Carvalho, Ivo
  • Hillesheim, J C
  • Delabie, E
  • Gallart, Daniel
  • Mantsinen, Mervi J
Special Issue Featuring the Invited Talks from the 48th EPS Conference on Plasma Physics, 27 June - 1 July 2022, The required heating power, , to access the high confinement regime (H-mode) in tritium containing plasmas is investigated in JET with ITER-like wall at a toroidal magnetic field of T and a plasma current of MA. , also referred to as the L-H power threshold, is determined in plasmas of pure tritium as well as mixtures of hydrogen with tritium (H-T) and mixtures of deuterium with tritium (D-T), and is compared to the L-H power threshold in plasmas of pure hydrogen and pure deuterium. It is found that, for otherwise constant parameters, is not the same in plasmas with the same effective isotope mass, , when they differ in their isotope composition. Thus, is not sufficient to describe the isotope effect of in a consistent manner for all considered isotopes and isotope mixtures. The electron temperature profiles measured at the L-H transition in the outer half of the radius are very similar for all isotopes and isotope mixtures, despite the fact that the L-H power threshold varies by a factor of about six. This finding, together with the observation of an offset linear relation between the L-H power threshold, , and an effective heat diffusivity, , indicates that the composition-dependent heat transport in the low confinement mode (L-mode) determines, how much power is needed to reach the necessary electron temperatures at the edge, and hence PLH., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. G Birkenmeier received funding from the Helmholtz Association under Grant No. VH-NG-1350, Peer Reviewed, "Article signat per 50 autors/es: G Birkenmeier, E R Solano, I S Carvalho, J C Hillesheim, E Delabie, E Lerche, D Taylor, D Gallart, M J Mantsinen, C Silva, C Angioni, F Ryter, P Carvalho, M Fontana, E Pawelec, S A Silburn, P Sirén, S Aleiferis, J Bernardo, A Boboc, D Douai, P Puglia, P Jacquet, E Litherland-Smith, I Jepu, D Kos, H J Sun, A Shaw, D King, B Viola, R Henriques, K K Kirov, M Baruzzo, J Garcia, A Hakola, A Huber, E Joffrin, D Keeling, A Kappatou, M Lennholm, P Lomas, E de la Luna, C F Maggi, J Mailloux, M Maslov, F G Rimini, N Vianello, G Verdoolaege, H Weisen, M Wischmeier and JET Contributors", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of ICRF Heating Schemes in ITER Non-Active Plasmas Using PION+ETS Integrated Modeling

  • Bensadon, Tomas
  • Mantsinen, Mervi J.
  • Jonsson, Thomas
  • Gallart, Daniel
  • Saez Pous, Xavier
  • Manyer, Jordi
The PION code has been integrated into the European Transport Solver (ETS) transport workflow, and we present the first application to model Ion Cyclotron Resonance Frequency (ICRF) heating scenarios in the next-step fusion reactor ITER. We present results of predictive, self-consistent and time-dependent simulations where the resonant ion concentration is varied to study its effects on the performance, with a special emphasis on the resulting bulk ion heating and thermal ion temperature. We focus on two ICRF heating schemes, i.e., fundamental H minority heating in a 4He plasma at 2.65 T/7.5 MA and a three-ion ICRF scheme consisting of fundamental 3He heating in a H-4He plasma at 3.3 T/ 8.8 MA. The H minority heating scenario is found to result in strong absorption by resonant H ions as compared to competing absorption mechanisms and dominant background electron heating for H concentrations up to 10%. The highest H absorption of ∼80% of the applied ICRF power and highest ion temperature of ∼15 keV are obtained with an H concentration of 10%. For the three-ion scheme in 85%:15% H:4He plasma, PION+ETS predicts 3He absorption in the range of 21–65% for 3He concentrations in the range of 0.01–0.20%, with the highest 3He absorption at a 3He concentration of 0.20%., This research was funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Overview of interpretive modelling of fusion performance in JET DTE2 discharges with TRANSP

  • Štancar, Žiga
  • K. Kirov, Krassimir
  • Auriemma, Fulvio
  • Kim, Hyun-Tae
  • Poradzinski, Michal
  • Gallart, Daniel
  • Mantsinen, Mervi J.
In the paper we present an overview of interpretive modelling of a database of JET-ILW 2021 D-T discharges using the TRANSP code. The main aim is to assess our capability of computationally reproducing the fusion performance of various D-T plasma scenarios using different external heating and D-T mixtures, and to understand the performance driving mechanisms. We find that interpretive simulations confirm a general power-law relationship between increasing external heating power and fusion output, which is supported by absolutely calibrated neutron yield measurements. A comparison of measured and computed D-T neutron rates shows that the calculations' discrepancy depends on the absolute neutron yield. The calculations are found to agree well with measurements for higher performing discharges with external heating power above ∼20 $\mathrm{MW}$, while low-neutron shots display an average discrepancy of around +40% compared to measured neutron yields. A similar trend is found for the ratio between thermal and beam-target fusion, where larger discrepancies are seen in shots with dominant beam-driven performance. We compare the observations to studies of JET-ILW D discharges, to find that on average the fusion performance is well modelled over a range of heating power, although an increased unsystematic deviation for lower-performing shots is observed. The ratio between thermal and beam-induced D-T fusion is found to be increasing weakly with growing external heating power, with a maximum value of $\gtrsim$1 achieved in a baseline scenario experiment. An evaluation of the fusion power computational uncertainty shows a strong dependence on the plasma scenario type and fusion drive characteristics, varying between ±25% and 35%. D-T fusion alpha simulations show that the ratio between volume-integrated electron and ion heating from alphas is $\lesssim$10 for the majority of analysed discharges. Alphas are computed to contribute between ∼15% and 40% to the total electron heating in the core of highest performing D-T discharges. An alternative workflow to TRANSP was employed to model JET D-T plasmas with the highest fusion yield and dominant non-thermal fusion component because of the use of fundamental radio-frequency heating of a large minority in the scenario, which is calculated to have provided ∼10% to the total fusion power., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No. 101052200—EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. This work has been part-funded by the EPSRC Energy Programme with grant number EP/W006839/1. The Barcelona Supercomputing Center part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033. In addition BSC are grateful for the support received from the Departament de Recerca i Universitats de la Generalitat de Catalunya via the Research Group Fusion Group with code: 2021 SGR 00908. The Laboratorio Nacional de Fusión contribution was funded in part via the Spanish National R&D Project PID2021-127727OB-I00 funded through MCIN/AEI /10.13039/501100011033., Peer Reviewed, "Article signat per 43 autors/es: Ž. Štancar, K.K. Kirov, F. Auriemma, H.-T. Kim, M. Poradziński, R. Sharma, R. Lorenzini, Z. Ghani, M. Gorelenkova, F. Poli, A. Boboc, S. Brezinsek, P. Carvalho, F.J. Casson, C.D. Challis, E. Delabie, D. Van Eester, M. Fitzgerald, J.M. Fontdecaba, D. Gallart, J. Garcia, L. Garzotti, C. Giroud, A. Kappatou, Ye.O. Kazakov, D.B. King, V.G. Kiptily, D. Kos, E. Lerche, E. Litherland-Smith, C.F. Maggi, P. Mantica, M.J. Mantsinen, M. Maslov, S. Menmuir, M. Nocente, H.J.C. Oliver, S.E. Sharapov, P. Sirén, E.R. Solano, H.J. Sun, G. Szepesi and JET Contributors", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of thermodynamic non-idealities on the interfacial properties of helium bubbles in liquid lead–lithium mixtures

  • Álvarez Galera, Edgar
  • Batet Miracle, Lluís
  • Martí Rabassa, Jordi
The extremely low solubility of helium in liquid metals may lead to rapid supersaturation, promoting spontaneous formation of helium bubbles by nucleation. Once nucleated, the stability of these bubbles is governed by the properties of the helium–liquid metal interface. In particular, interfacial tension between the immiscible phases controls bubble interactions and induces local pressure inhomogeneities. This work is motivated by the need of a better understanding of helium bubble formation in liquid Pbsingle bondLi alloys, which are of particular relevance for the design of breeding blankets in the future nuclear fusion reactors. We employ classical molecular dynamics simulations to investigate helium segregation in a wide range of lead–lithium systems, including the limiting cases of pure lead and pure lithium. Changes in local pressure are evaluated from direct mechanical calculations, enabling the characterization of interfacial properties. Interfacial tension and radius of the bubble are subsequently determined across multiple thermodynamic conditions, spanning temperatures starting near the melting points of the constituent metals up to 1021 K. The impact of curvature and composition of the alloy on the interfacial behaviour are also investigated., The authors thank A.S. Al-Awad for fruitful discussions. J.M. and L.B. acknowledge financial support from the EUROfusion project (HORIZON-101052200-EUROfusion). J.M. and E.A.G. thank financial support of project PID2024-157478NB-C32 funded by MCIN/AEI/ 10.13039/5011000-11033 and ERDF ‘A way of making Europe’ by the ‘European Union NextGenerationEU/PRTR’. J.M. gratefully acknowledges financial support from the Generalitat de Catalunya, Spain (Grant 2021 SGR 01411). E.A.G. was awarded a fellowship at the Polytechnic University of Catalonia (UPC) by the Spanish ‘Consejo de Seguridad Nuclear’ through the ARGOS Chair of Nuclear Safety and Radiation Protection. E.A.G. also thanks the UPC for financial support through the doctoral grant extension for the fourth year., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance Analysis and Optimizations of ERO2.0 Fusion Code

  • Garcia Gasulla, Marta
  • Vinyals Ylla Catala, Joan
  • Romazanov, Juri
  • Baumann, Christoph
  • Matveev, Dmitry
In this paper, we present a thorough performance analysis of a highly parallel Monte Carlo code for modeling global erosion and redeposition in fusion devices, ERO2.0. The study shows that the main bottleneck preventing the code from efficiently using the resources is the load imbalance at different levels. Load imbalance is inherent to the problem being solved, particle transport, and deposition. Based on the findings of the analysis, we also describe optimizations implemented on the code to improve its performance on HPC clusters. The proposed optimizations use MPI and OpenMP features, making them portable across architectures and achieving a 3.34x speedup with respect to the original code., This work has been carried out within the framework of the EURO-fusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200— EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. The authors gratefully acknowledge the computing time granted by the JARA Vergabegremium and provided on the JARA Partition part of the supercomputer JURECA at Forschungszentrum Jülich., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

EMWAVE: Código FEM para la simulación de ondas de radiofrecuencia en plasmas confinados magnéticamente

  • Domingo Ramos, Hernán
  • Gallart Escolà, Daniel
  • Soba Pascual, Alejandro
  • Mantsinen, Mervi Johanna
The analysis of electromagnetic (EM) wave propagation in an inhomogeneous, magnetically confined plasma is essential for nuclear fusion, particularly for ion and electron heating. This paper presents EMWAVE, a finite element code that simulates EM wave propagation in an anisotropic plasma by solving the Helmholtz equation in the frequency domain. The solver supports linear and quadratic elements and efficiently models complex domains. Various dielectric media and tokamak relevant configurations have been benchmarked, demonstrating the code’s reliability. EMWAVE incorporates the cold plasma permittivity tensor, showing excellent agreement with the well established ERMES code and theoretical predictions for tokamak cutoffs. Developed as a standalone tool and integrated into the HPC framework Alya, it aims to support reactor-scale simulations via a digital twin approach. Future work includes implementing a hot plasma permittivity tensor to capture wave particle interactions and extending the model to 3D reactor geometries., Este trabajo se ha realizado en el marco del Consorcio EUROfusion, financiado por la Unión Europea a través del Euratom Research and Training Programme (Acuerdo de subvención nº 101052200-EUROfusion). No obstante, las opiniones y puntos de vista expresados son exclusivamente los del autor y no reflejan necesariamente los de la Unión Europea o la Comisión Europea. Ni la Unión Europea ni la Comisión Europea pueden ser consideradas responsables de las mismas. Quisiéramos agradecer a FuseNet Association por su contribución económica en las etapas iniciales de este proyecto y al programa BSC AI4Science Fellowships por la financiación de mi período doctoral. Agradecemos el soporte recibido por el Departament de Recerca i Universitats de la Generalitat de Catalunya a través del grupo de investigación Fusion Group con código: 2021 SGR 00908., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Overview of the third JET deuterium-tritium campaign

  • Kappatou, Athina
  • Baruzzo, Matteo
  • Hakola, Antti
  • Jofrinn, Emmanuel Henri
  • Keeling, David
  • Mantsinen, Mervi J.
JET returned to deuterium-tritium operations in 2023 (DTE3 campaign), approximately two years after DTE2. DTE3 was designed as an extension of JET’s 2022-2023 deuterium campaigns, which focused on developing scenarios for ITER and DEMO, integrating in-depth physics understanding and control schemes. These scenarios were evaluated with mixed D-T fuel, using the only remaining tritium-capable tokamak until its closure in 2023. A core-edge-SOL integrated H-mode scenario was developed and tested in D-T, showing good confinement and partial divertor detachment with Ne-seeding. Stationary pulses with good performance, no tungsten accumulation, and even without ELMs were achieved in D-T. Plasmas with pedestals limited by peeling modes were studied with D, T-rich, and D-T fuel, revealing a positive correlation between pedestal electron pressure and pedestal electron density. The Quasi-Continuous Exhaust regime was successfully achieved with D-T fuel, with access criteria similar to those in D plasmas. A scenario with full detachment, the X-point radiator regime, was established in D-T, aided by the real-time control of the radiator’s position. The crucial characterisation of tritium retention continued in DTE3, using gas balance measurements and the new LID-QMS diagnostic. Nuclear technology studies were advanced during the DTE3 campaign, addressing issues such as the activation of water in cooling loops and single event effects on electronics. Building on the previous D, T and DTE2 campaigns and the lessons learned from them, DTE3 extended our understanding of D-T plasmas, particularly in scenarios relevant to next-generation devices such as ITER and DEMO., The authors acknowledge and thank the JET team for their hard work and commitment. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 10 105 2200 - EUROfusion). The Swiss contribution to this work has been funded by the Swiss State Secretariat for Education, Research and Innovation (SERI). This work was supported in part by Grant PID2021-12 7727OB-I00, funded by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13 039/50 110 0011 033, and by ERDF/EU. This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called ‘PMW’ for 2022–2024. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union, the European Commission or SERI. Neither the European Union nor the European Commission nor SERI can be held responsible for them., Peer Reviewed, "Article signat per 71 autors/es: A Kappatou*, M Baruzzo, A Hakola, E Joffrin, D Keeling, B Labit, E Tsitrone, N Vianello, M Wischmeier, I Balboa, J Bernardo, M Bernert, T Bosman, S Brezinsek, D Brida, I S Carvalho, P Carvalho, L Ceelen, C D Challis, I Coffey, T Dittmar, M Dunne, M Faitsch, A R Field, L Frassinetti, L Garzotti, Z Ghani, C Giroud, S Henderson, R B Henriques, J Hobirk, P Jacquet, I Jepu, Ye O Kazakov, D B King, K K Kirov, D Kos, K Krieger, M Lennholm, E Lerche, X Litaudon, E Litherland-Smith, P Lomas, C Lowry, J Mailloux, M J Mantsinen, M Maslov, D Matveev, A Meigs, S Menmuir, C Olde, C Perez von Thun, L Piron, G Pucella, H Reimerdes, F Rimini, O Sauter, P A Schneider, B Sieglin, S Silburn, E R Solano, H Sun, D F Valcarcel, D van Eester, R Villari, A Widdowson, S Wiesen, M Zlobinski, V K Zotta, the JET contributors and the EUROfusion Tokamak Exploitation Team", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

  • Dominguez Palacios, Jesus
  • Garcia Muñoz, Manuel
  • Toscano Jimenez, Manuel
  • Liu, Yueqiang
  • Mancini, Alessio
  • Cruz Zabala, Diego Jose
  • Berkery, John
  • Labbate, John A.
  • Parisi, Jason
  • Todo, Yasushi
  • Reyner Viñolas, Alex
  • Podestà, Mario
  • Viezzer, Eleonora
  • Oyola Dominguez, Pablo
  • Futatani, Shimpei
Linear magnetohydrodynamic (MHD) simulations for the SMall Aspect Ratio Tokamak (SMART) have been carried out for the first time, for both positive (PT) and negative triangularity (NT) shaped plasmas using the MARS-F code. The MHD stability of projected SMART plasmas against internal kinks, infernal modes and edge peeling-ballooning modes have been analyzed for a wide range of realistic equilibria. A stabilization of internal kinks and infernal modes is observed when increasing the safety factor profile and reducing plasma beta. PT shaped plasmas are more stable against both internal kinks and infernal modes than their counterpart NT shaped plasmas. Toroidal flows have little impact on the MHD stability of the internal kinks, but they have a strong stabilizing effect on infernal modes, which can be further mitigated in NT shaped plasmas. The MHD stability of peeling-ballooning modes is reduced in NT shaped plasmas, as observed in conventional tokamaks., This work received funding from the Spanish Ministry ofScience (Grant Nos. FPU17/05703 and PID2020-116822RB-I00) and from the European Research Council (ERC) underthe European Union’s Horizon 2020 research and innov-ation programme (Grant Agreement No. 805162). Thiswork was supported by the NINS program of PromotingResearch by Networking among Institutions. This work wasco-funded by the European Regional Development Fund(Andalusian Operational Programme 2014 – 2020) and by theMinistry of Economic Transformation, Industry, Knowledgeand Universities of the Junta de Andalucía within theframework of the PAIDI project with reference P18-FR-3812. This work has been carried out within the frameworkof the EUROfusion Consortium, funded by the EuropeanUnion via the Euratom Research and Training Programme(Grant Agreement No 101052200 – EUROfusion). Viewsand opinions expressed are however those of the author(s)only and do not necessarily reflect those of the EuropeanUnion or the European Commission. Neither the EuropeanUnion nor the European Commission can be held respons-ible for them. Additional support was provided by the U.S.Department of Energy under Contract Number DE-ACO2-09CH11466 (PPPL), as well as the Science UndergraduateLaboratory Internship (SULI) program. The authors grate-fully acknowledge the computer resources of RES (Spanish13 Nucl. Fusion64(2024) 126028J. Dominguez-Palacioset alSupercomputing Network) at MareNostrum and the tech-nical support provided by Barcelona Supercomputing Center(BSC), as well as those of CICA (Centro InformáticoCientífico de Andalucía). The authors gratefully acknowledgethe help of Oak Nelson with the BALOO code., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parametrization of embedded-atom method potential for liquid lithium and lead-lithium eutectic alloy

  • Al Awad, Abdulrahman
  • Batet Miracle, Lluís
  • Sedano Miguel, Luis Ángel
Liquid lead-lithium eutectic remains as a promising candidate for various breeding-blanket designs in future nuclear-fusion technologies. The lack of a generalized theory of interatomic forces in the liquid state is reflected on the wide variety of proposed functional forms to describe interatomic interactions even in simple liquids. Computer simulations facilitate the study of liquid metal properties, due to mathematical and experimental challenges. A classical-MD EAM potential is parametrized using mechanical and non-mechanical (melting-point) properties to minimize the arbitrariness of functional forms, where the employed pair potential stems from the liquid-state theory to avoid the issue of the uniqueness of the potential. Enhanced performance is obtained for liquid density, energy, structure, diffusivity and shear viscosity of Li, and their temperature-dependencies. In a similar manner, reference experimental and ab initio MD data are used to parametrize a functional to describe Pb-Li pairwise interactions in liquid Pb-Li alloy, which is used with the derived EAM of liquid Li and a reference EAM of liquid Pb to investigate properties of liquid Pb-Li alloy. Enhanced transferability characteristics are obtained for low-in-lithium liquid Pb-Li melts, where Coulombic interactions are negligible. In specific, the exhibited behaviour of Li in liquid lead-lithium eutectic is consistent with findings from ab initio MD methods, and drastically different from predictions of previous C-MD studies which suggested a substantial segregation of Li atoms instead of dispersion. It is concluded that the functional form of the pair potential and its uniqueness influence both the pure liquid-metal properties and the validity of the potential transferability in multi-component systems, where a theoretical functional results in enhanced performance in pure and alloyed liquid systems., The first author is a holder of FI AGAUR doctoral fellowship, provided by Generalitat de Catalunya and European Social Plus Fund. This work is partially funded by the EUROfusion project (Grant Agreement No. 101052200) under the Horizon Europe programme., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Henry's constant of helium in liquid lead-lithium alloys

  • Álvarez Galera, Edgar
  • Laria, Daniel Héctor
  • Mazzanti Castrillejo, Fernando Pablo
  • Batet Miracle, Lluís
  • Martí Rabassa, Jordi
Information about the solubility of helium in liquid metals is of fundamental relevance in the design of the future nuclear fusion reactors, since the formation of helium bubbles inside the breeding blankets of the reactors constitutes a threat to the durability of the devices and, more importantly, to the efficiency of tritium recovery. In the present work, we report molecular dynamics simulations results of the solubility of helium in a variety of lead-lithium alloys. Simulation experiments have been combined with a classical perturbative procedure able to compute the free energy of insertion of a helium atom inside a liquid metal bath, directly related to the solubility of helium. As the most important case, the eutectic state (16%Li-84%Pb at 508 K) has been explored in full details, predicting a solubility value of (6.1 ± 1.4) × 10^(-16) Pa-1. In addition, several temperatures and atomic fractions of the solvent have been explored. For any temperature, we have found that the solubility of helium in pure lithium is lower than in pure lead. We have also studied the 1000 K isotherm and observed that there is a minimum solubility value for ~ 80%Li-20%Pb. The observed trends indicate that solubilities rise with increasing temperatures., The authors thank A.Al-Awad for fruitful discussions. J.M. and L.B. acknowledge financial support from the EUROfusion project (HORIZON-101052200-EUROfusion). J.M. and E.A. thank financial support of project PID2021-124297NB-C32 funded by MCIN/AEI/10.13039/5011000-11033 and ERDF “A way of making Europe” by the “European Union NextGenerationEU/PRTR”. F.M. and J.M. gratefully acknowledge financial support from the Generalitat de Catalunya (Grant 2021 SGR 01411). F.M. acknowledges support under project PID2023-147469NB-C21 by the Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Spain). E.A. has been awarded a fellowship at the Polytechnic University of Catalonia by the Spanish “Consejo de Seguridad Nuclear” through the ARGOS Chair of Nuclear Safety and Radiation Protection. D.L. is on leave of absence from “Departamento de Química Inorgánica, Analítica y Química-Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires” (DQIAQF-FCEN-UBA) and from “Departamento de Física de la Materia Condensada, Comisión Nacional de Energía Atómica” (DFMC-TANDAR-CNEA), Avenida Libertador 8250, Buenos Aires, 1429, Argentina., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observation of magnetic islands in tokamak plasmas during the suppression of edge-localized modes

  • Willensdorfer, Matthias
  • Mitterauer, Verena
  • Hoelzl, Matthias
  • Suttrop, Wolfgang
  • Cianciosa, Mark
  • Dunne, Mike
  • Fischer, Rainer
  • Leuthold, Nils
  • Puchmayr, Jonas
  • Samoylov, Oleg
  • Suárez López, Guillermo
  • Wendler, Daniel
  • Futatani, Shimpei
  • Gallart Escolà, Daniel
  • Mantsinen, Mervi Johanna
In tokamaks, a leading platform for fusion energy, periodic filamentary plasma eruptions known as edge-localized modes occur in plasmas with high-energy confinement and steep pressure profiles at the plasma edge. These edge-localized modes could damage the tokamak wall but can be suppressed using small three-dimensional magnetic perturbations. Here we demonstrate that these magnetic perturbations can change the magnetic topology just inside the steep gradient region of the plasma edge. We identify signatures of a magnetic island, and their observation is linked to the suppression of edge-localized modes. We compare high-resolution measurements of perturbed magnetic surfaces with predictions from ideal magnetohydrodynamic theory where the magnetic topology is preserved. Although ideal magnetohydrodynamics adequately describes the measurements in plasmas exhibiting edge-localized modes, it proves insufficient for plasmas where these modes are suppressed. Nonlinear resistive magnetohydrodynamic modelling supports this observation. Our study experimentally confirms the predicted role of magnetic islands in inhibiting the occurrence of edge-localized modes. This will be beneficial for physics-based predictions in future fusion devices to control these modes., This material is based upon work supported by the US Department of Energy under award DE-SC0021968. This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (grant agreement no. 101052200-EUROfusion)., Peer Reviewed, Article signat per 437 autors: Max Planck Institute for Plasma Physics, Garching, Germany: Matthias Willensdorfer, Verena Mitterauer, Matthias Hoelzl, Wolfgang Suttrop, Mike Dunne, Rainer Fischer, Jonas Puchmayr, Oleg Samoylov, Daniel Wendler, C. Angioni, N. Arden, V. Artigues, M. Astrain, M. Balden, V. Bandaru, A. Banon Navarro, M. Bauer, A. Bergmann, M. Bergmann, M. Bernert, R. Bilato, G. Birkenmeier, V. Bobkov, A. Bock, L. Bock, T. Body, N. Bonanomi, B. Böswirth, A. Bottino, D. Brida, A. Buhler, A. Burckhart, P. Cano Megías, D. Carlton, A. Castillo Castillo, A. Chankin, G. Conway, D. Coster, P. David, P. de Marné, A. Di Siena, M. Dibon, M. Dunne, R. Dux, S. Elgeti, E. Fable, M. Faitsch, D. Fajardo Jimenez, U. Fantz, H. Faugel, R. Fischer, M. Fröschle, J. C. Fuchs, H. Fünfgelder, L. Giannone, O. Girka, T. Gleiter, S. Glöggler, J. C. Gonzalez, T. Görler, A. Gräter, G. Grenfell, H. Greuner, M. Griener, O. Grover, A. Gude, S. Günter, T. Happel, N. den Harder, T. Hayward-Schneider, B. Heinemann, P. Heinrich, A. Herrmann, J. Hobirk, M. Hölzl, C. Hopf, T. Höschen, K. Hunger, V. Igochine, J. Illerhaus, W. Jacob, N. Jaksic, F. Janky, F. Jenko, A. Kallenbach, J. Kalis, A. Kappatou, C.-P. Käsemann, M. Kircher, F. Klossek, M. Koleva, M. Krause, A. Kreuzeder, K. Krieger, O. Kudlacek, B. Kurzan, K. Lackner, P. T. Lang, P. Lauber, E. Lerche, O. Linder, Z. Lu, T. Luda di Cortemiglia, T. Lunt, T. Maceina, A. Magnanimo, H. Maier, O. Maj, A. Manhard, M. Maraschek, F. Matos, M. Mayer, R. McDermott, R. Merkel, M. Michelini, P. Molina Cabrera, M. Muraca, R. Neu, T. Nishizawa, I. Novikau, R. Ochoukov, O. Pan, G. Papp, G. Pautasso, M. Peglau, U. Plank, B. Plöckl, E. Poli, J. Puchmayr, T. Pütterich, G. Raupp, M. Reich, M. Reisner, B. Rettino, T. Ribeiro, R. Riedl, J. Riesch, V. Rohde, M. Rott, F. Ryter, O. Samoylov, G. Schall, A. Schlüter, K. Schmid, P. A. Schneider, M. Schubert, C. Schuster, T. Schwarz-Selinger, J. Schweinzer, F. Sciortino, O. Seibold-Benjak, M. Siccinio, B. Sieglin, A. Sigalov, D. Silvagni, M. Spacek, A. Stegmeir, D. Stieglitz, J. Stober, U. Stroth, E. Strumberger, W. Suttrop, B. Tál, G. Tardini, M. Teschke, W. Tierens, D. Told, W. Treutterer, P. Ulbl, G. Urbanczyk, M. Usoltseva, F. Vannini, T. Vierle, G. Vogel, U. von Toussaint, D. Wagner, X. Wang, M. Weiland, D. Wendler, M. Willensdorfer, B. Wiringer, M. Wischmeier, E. Wolfrum, Q. Yu, I. Zammuto, T. Zehetbauer, W. Zholobenko, M. Zilker, B. Zimmermann, A. Zito & H. Zohm // Oak Ridge National Laboratory, Oak Ridge, TN, USA: Mark Cianciosa // Columbia University, New York, NY, USA: Nils Leuthold, N. Leuthold & C. Paz-Soldan // ITER Organization, Saint-Paul-lèz-Durance, France: Guillermo Suárez López, A. Encheva, S. Jachmich, M. Lehnen, G. Suarez Lopez & S. Vanmulders // Physics Department, TUM School of Natural Sciences, Technical University of Munich, Garching, Germany: Daniel Wendler, S. Glöggler, F. Hitzler, U. Stroth & D. Wendler // Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal: D. Aguiam, J. Bernardo, P. Carvalho, R. Coelho, A. Figueredo, L. Gil, L. Guimarais, D. Hachmeister, F. Nabais, V. Plyusnin, J. Santos, E. Seliunin, A. Silva, C. Silva, P. Varela & J. Vicente // ENEA, IFP-CNR, Milan, Italy: E. Alessi, G. Croci, S. Garavaglia, G. Granucci, A. Mancini, P. Mantica, S. Nowak, D. Ricci, C. Sozzi & M. Tardocchi // Department of Applied Physics, Aalto University, Espoo, Finland: O. Asunta, M. Groth, J. Karhunen, T. Kurki-Suonio, A. Lahtinen, I. Paradela Perez, A. Salmi, S. Sipilä & A. Snicker // Léonard de Vinci Pôle Universitaire Research Center, Paris, France: A. Biancalani // MIT Plasma Science and Fusion Center, Cambridge, MA, USA: R. Bielajew, A. Hubbard, P. Rodriguez-Fernandez, B. Vanovac, A. E. White & C. Yoo // Eindhoven University of Technology, Eindhoven, the Netherlands: T. Blanken, H. van den Brand, M. de Baar, M. Kantor, E. Maljaars, G. Ronchi & J. Scholte // Consorzio RFX, Padova, Italy: T. Bolzonella, C. Cazzaniga, R. Delogu, M. Gobbin, L. Marrelli, P. Martin, C. Piron, G. Spizzo, M. Spolaore, D. Terranova, G. Trevisan, M. Valisa & N. Vianello // Princeton Plasma Physics Laboratory, Princeton, NJ, USA: A. Bortolon, F. Laggner, R. Maingi & R. Nazikian // CEA/IRFM, Saint-Paul-lèz-Durance, France: C. Bottereau, F. Clairet, L. Colas, A. Gallo & E. Joffrin // Forschungszentrum Jülich, Jülich, Germany: M. Brenzke, S. Brezinsek, J. W. Coenen, P. Denner, Y. Gao, A. Huber, A. Krämer-Flecken, L. Li, D. Reiser & D. Reiter // Institut Jean Lamour, Université de Lorraine, Nancy, France: F. Brochard, S. Heuraux & A. Houben // CCFE, Culham Science Centre, Abingdon, UK: J. Buchanan, M. Carr, C. Challis, C. Ham, J. Harrison, S. Henderson, A. Kirk, J. Mailloux, M.-L. Mayoral, H. Meyer, D. A. Ryan, S. Saarelma, S. Sharapov, J. Simpson, M. Valovic & I. Voitsekhovitch // Aix-Marseille University, CNRS, Marseille, France: Y. Camenen // Department of Electrical and Electronic Engineering, University of Cagliari, Cagliari, Italy: B. Cannas & G. Sias // ENEA, Centro Ricerche Frascati, Frascati, Italy: C. Castaldo, C. Cianfarani, B. Esposito, E. Giovannozzi & G. Rocchi // ENEA, University of Milano-Bicocca, Milano, Italy: M. Cavedon, A. Dal Molin, G. Gorini & M. Nocente // Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland: A. Chomiczewska, K. Galazka, I. Ivanova-Stanik & R. Zagorski // Ecole Polytechnique Fédérale de Lausanne, Swiss Plasma Center, Lausanne, Switzerland: S. Coda, B. P. Duval, F. Felici, T. Goodman, M. Kong, B. Labit, A. Merle, A. Pau, L. Porte, O. Sauter, A. Shalpegin, U. Sheikh & C. Sommariva // ÖAW, IAP, University of Innsbruck, Innsbruck, Austria: S. Costea, C. Ionita-Schrittwieser, A. Kendl & R. Schrittwieser // University of Wisconsin, Madison, WI, USA: T. Cote, B. Geiger & O. Schmitz // CFS, Fort Devens, MA, USA: A. J. Creely & T. Eich // Universidad de Sevilla, Sevilla, Spain: D. J. Cruz Zabala, J. J. Dominguez Palacios Durán, J. Galdon-Quiroga, M. Garcia Muñoz, J. Gonzalez Martin, A. Jansen van Vuuren, P. Oyola, J. F. Rivero Rodriguez, L. Sanchis Sanchez & E. Viezzer // Centre for Energy Research, Budapest, Hungary: G. Cseh, D. Dunai, G. Kocsis, G. Pokol, D. Réfy, T. Szepesi & S. Zoletnik // York Plasma Institute, University of York, York, UK: I. Cziegler, L. Horvath & B. Lipschultz // ENEA Consorzio CREATE, Naples, Italy: O. D’Arcangelo // Karlsruhe Institut für Technologie, Karlsruhe, Germany: C. Day, V. Hauer & S. Varoutis // Institute of Plasma Physics, National Science Center Kharkov Institute of Physics and Technology, Krakov, Ukraine: M. Dreval // Institute of Plasma Physics of the CAS, Praha, Czech Republic: M. Farnik, O. Ficker, F. Jaulmes & M. Komm // Max-Planck-Institut für Plasmaphysik, Greifswald, Germany: O. Ford, G. Fuchert, D. Gradic, K. Höfler, D. Kulla, F. Reimold & R. Wolf // KTH Royal Institute of Technology, Stockholm, Sweden: L. Frassinetti, P. Petersson, S. Ratynskaia, M. Rubel & E. Thorén // Barcelona Supercomputing Center, Barcelona, Spain: S. Futatani, D. Gallart Escolà & M. Mantsinen // Department of Physics, Durham University, Durham, UK: S. Gibson // VTT Technical Research Centre of Finland, Espoo, Finland: A. H. Hakola, J. Likonen & T. Tala // ÖAW, IAP, Vienna University of Technology, Vienna, Austria: G. Harrer, W. Kernbichler, P. Lainer, M. Markl & L. Radovanovic // General Atomics, San Diego, CA, USA: T. Hellsten, Y. Liu & M. van Zeeland // Laboratoire de Physique des Plasmas, Ecole Polytechnique, Palaiseau, France: P. Hennequin // ÖAW, Graz University of Technology, Graz, Austria: E. Heyn & S. Kasilov // Department of Physics, Technical University of Denmark, Lyngby, Denmark: J. H. Holm, T. Jensen, S. Kjer Hansen, J. Madsen, V. Naulin, R. D. Nem, A. H. Nielsen, S. K. Nielsen, J. Olsen, J. Rasmussen, M. Salewski, M. Stejner & T. Verdier // Ioffe Institute, St. Petersburg, Russian Federation: M. Iliasova, E. Khilkevitch & A. Shevelev // Department of Physics, Chalmers University of Technology, Gothenburg, Sweden: K. Insulander Björk // ERM/KMS, Brussels, Belgium: Y. Kazakov, A. Lyssoivan, V. Maquet, M. Tripský & G. Verdoolaege // Ghent University, Ghent, Belgium: V. Klevarova, A. Shabbir & G. Verdoolaege // Electrical and Computer Engineering, University of California, Davis, CA, USA: N. C. Luhmann // ICREA, Barcelona, Spain: M. Mantsinen // Universität Greifswald, Greifswald, Germany: P. Manz // ISC-CNR, Politecnico di Torino, Turin, Italy: C. Marchetto & D. Milanesio // School of Physics, University College Cork, Cork, Ireland: P. J. McCarthy // Technische Universität München, Garching, Germany: R. Neu // Department of Industrial Engineering, University of Rome, Rome, Italy: E. Peluso // IGVP Universität Stuttgart, Stuttgart, Germany: B. Plaum & M. Ramisch // Budapest University of Technology and Economics, Budapest, Hungary: G. Pokol // Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain: G. Ratta & E. Solano // Universitá degli Studi della Tuscia, DEIM Department, Viterbo, Italy: A. Redl // Chinese Academy of Sciences, Hefei, China: Q. Yang & W. Zhang // Consortia the ASDEX Upgrade Team: D. Aguiam, E. Alessi, C. Angioni, N. Arden, V. Artigues, M. Astrain, O. Asunta, M. Balden, V. Bandaru, A. Banon Navarro, M. Bauer, A. Bergmann, M. Bergmann, J. Bernardo, M. Bernert, A. Biancalani, R. Bielajew, R. Bilato, G. Birkenmeier, T. Blanken, V. Bobkov, A. Bock, L. Bock, T. Body, T. Bolzonella, N. Bonanomi, A. Bortolon, B. Böswirth, C. Bottereau, A. Bottino, H. van den Brand, M. Brenzke, S. Brezinsek, D. Brida, F. Brochard, J. Buchanan, A. Buhler, A. Burckhart, Y. Camenen, B. Cannas, P. Cano Megías, D. Carlton, M. Carr, P. Carvalho, C. Castaldo, A. Castillo Castillo, M. Cavedon, C. Cazzaniga, C. Challis, A. Chankin, A. Chomiczewska, C. Cianfarani, F. Clairet, S. Coda, R. Coelho, J. W. Coenen, L. Colas, G. Conway, S. Costea, D. Coster, T. Cote, A. J. Creely, G. Croci, D. J. Cruz Zabala, G. Cseh, I. Cziegler, O. D’Arcangelo, A. Dal Molin, P. David, C. Day, M. de Baar, P. de Marné, R. Delogu, P. Denner, A. Di Siena, M. Dibon, J. J. Dominguez Palacios Durán, D. Dunai, M. Dreval, M. Dunne, B. P. Duval, R. Dux, T. Eich, S. Elgeti, A. Encheva, B. Esposito, E. Fable, M. Faitsch, D. Fajardo Jimenez, U. Fantz, M. Farnik, H. Faugel, F. Felici, O. Ficker, A. Figueredo, R. Fischer, O. Ford, L. Frassinetti, M. Fröschle, G. Fuchert, J. C. Fuchs, H. Fünfgelder, S. Futatani, K. Galazka, J. Galdon-Quiroga, D. Gallart Escolà, A. Gallo, Y. Gao, S. Garavaglia, M. Garcia Muñoz, B. Geiger, L. Giannone, S. Gibson, L. Gil, E. Giovannozzi, O. Girka, T. Gleiter, S. Glöggler, M. Gobbin, J. C. Gonzalez, J. Gonzalez Martin, T. Goodman, G. Gorini, T. Görler, D. Gradic, G. Granucci, A. Gräter, G. Grenfell, H. Greuner, M. Griener, M. Groth, O. Grover, A. Gude, L. Guimarais, S. Günter, D. Hachmeister, A. H. Hakola, C. Ham, T. Happel, N. den Harder, G. Harrer, J. Harrison, V. Hauer, T. Hayward-Schneider, B. Heinemann, P. Heinrich, T. Hellsten, S. Henderson, P. Hennequin, S. Heuraux, A. Herrmann, E. Heyn, F. Hitzler, J. Hobirk, K. Höfler, J. H. Holm, M. Hölzl, C. Hopf, L. Horvath, T. Höschen, A. Houben, A. Hubbard, A. Huber, K. Hunger, V. Igochine, M. Iliasova, J. Illerhaus, K. Insulander Björk, C. Ionita-Schrittwieser, I. Ivanova-Stanik, S. Jachmich, W. Jacob, N. Jaksic, F. Janky, A. Jansen van Vuuren, F. Jaulmes, F. Jenko, T. Jensen, E. Joffrin, A. Kallenbach, J. Kalis, M. Kantor, A. Kappatou, J. Karhunen, C.-P. Käsemann, S. Kasilov, Y. Kazakov, A. Kendl, W. Kernbichler, E. Khilkevitch, M. Kircher, A. Kirk, S. Kjer Hansen, V. Klevarova, F. Klossek, G. Kocsis, M. Koleva, M. Komm, M. Kong, A. Krämer-Flecken, M. Krause, A. Kreuzeder, K. Krieger, O. Kudlacek, D. Kulla, T. Kurki-Suonio, B. Kurzan, B. Labit, K. Lackner, F. Laggner, A. Lahtinen, P. Lainer, P. T. Lang, P. Lauber, M. Lehnen, E. Lerche, N. Leuthold, L. Li, J. Likonen, O. Linder, B. Lipschultz, Y. Liu, Z. Lu, T. Luda di Cortemiglia, N. C. Luhmann, T. Lunt, A. Lyssoivan, T. Maceina, J. Madsen, A. Magnanimo, H. Maier, J. Mailloux, R. Maingi, O. Maj, E. Maljaars, V. Maquet, A. Mancini, A. Manhard, P. Mantica, M. Mantsinen, P. Manz, M. Maraschek, C. Marchetto, M. Markl, L. Marrelli, P. Martin, F. Matos, M. Mayer, M.-L. Mayoral, P. J. McCarthy, R. McDermott, R. Merkel, A. Merle, H. Meyer, M. Michelini, D. Milanesio, P. Molina Cabrera, M. Muraca, F. Nabais, V. Naulin, R. Nazikian, R. D. Nem, R. Neu, A. H. Nielsen, S. K. Nielsen, T. Nishizawa, M. Nocente, I. Novikau, S. Nowak, R. Ochoukov, J. Olsen, P. Oyola, O. Pan, G. Papp, I. Paradela Perez, A. Pau, G. Pautasso, C. Paz-Soldan, M. Peglau, E. Peluso, P. Petersson, C. Piron, U. Plank, B. Plaum, B. Plöckl, V. Plyusnin, G. Pokol, E. Poli, L. Porte, J. Puchmayr, T. Pütterich, L. Radovanovic, M. Ramisch, J. Rasmussen, G. Ratta, S. Ratynskaia, G. Raupp, A. Redl, D. Réfy, M. Reich, F. Reimold, D. Reiser, M. Reisner, D. Reiter, B. Rettino, T. Ribeiro, D. Ricci, R. Riedl, J. Riesch, J. F. Rivero Rodriguez, G. Rocchi, P. Rodriguez-Fernandez, V. Rohde, G. Ronchi, M. Rott, M. Rubel, D. A. Ryan, F. Ryter, S. Saarelma, M. Salewski, A. Salmi, O. Samoylov, L. Sanchis Sanchez, J. Santos, O. Sauter, G. Schall, A. Schlüter, J. Scholte, K. Schmid, O. Schmitz, P. A. Schneider, R. Schrittwieser, M. Schubert, C. Schuster, T. Schwarz-Selinger, J. Schweinzer, F. Sciortino, O. Seibold-Benjak, E. Seliunin, A. Shabbir, A. Shalpegin, S. Sharapov, U. Sheikh, A. Shevelev, G. Sias, M. Siccinio, B. Sieglin, A. Sigalov, A. Silva, C. Silva, D. Silvagni, J. Simpson, S. Sipilä, A. Snicker, E. Solano, C. Sommariva, C. Sozzi, M. Spacek, G. Spizzo, M. Spolaore, A. Stegmeir, M. Stejner, D. Stieglitz, J. Stober, U. Stroth, E. Strumberger, G. Suarez Lopez, W. Suttrop, T. Szepesi, B. Tál, T. Tala, G. Tardini, M. Tardocchi, D. Terranova, M. Teschke, E. Thorén, W. Tierens, D. Told, W. Treutterer, G. Trevisan, M. Tripský, P. Ulbl, G. Urbanczyk, M. Usoltseva, M. Valisa, M. Valovic, M. van Zeeland, S. Vanmulders, F. Vannini, B. Vanovac, P. Varela, S. Varoutis, T. Verdier, G. Verdoolaege, N. Vianello, J. Vicente, T. Vierle, E. Viezzer, G. Vogel, I. Voitsekhovitch, U. von Toussaint, D. Wagner, X. Wang, M. Weiland, D. Wendler, A. E. White, M. Willensdorfer, B. Wiringer, M. Wischmeier, R. Wolf, E. Wolfrum, Q. Yang, C. Yoo, Q. Yu, R. Zagorski, I. Zammuto, T. Zehetbauer, W. Zhang, W. Zholobenko, M. Zilker, B. Zimmermann, A. Zito, H. Zohm & S. Zoletnik, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

L-H transition studies in tritium and deuterium–tritium campaigns at JET with Be wall and W divertor

  • Solano, Emilia R
  • Birkenmeier, Gregor
  • Garcia Silva, Carlos
  • Delabie, Ephrem
  • Hillesheim, J.C.
  • Gallart, Daniel
  • Mantsinen, Mervi J.
{The recent deuterium–tritium campaign in JET-ILW (DTE2) has provided a unique opportunity to study the isotope dependence of the L-H power threshold in an ITER-like wall environment (Be wall and W divertor). Here we present results from dedicated L-H transition experiments at JET-ILW, documenting the power threshold in tritium and deuterium–tritium plasmas, comparing them with the matching deuterium and hydrogen datasets. From earlier experiments in JET-ILW it is known that as plasma isotopic composition changes from deuterium, through varying deuterium/hydrogen concentrations, to pure hydrogen, the value of the line averaged density at which the threshold is minimum, , increases, leading us to expect that (T) < (DT) < (D) < (H). The new power threshold data confirms these expectations in most cases, with the corresponding ordering of the minimum power thresholds. We present a comparison of this data to power threshold scalings, used for extrapolation to future devices such as ITER and DEMO., This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme Grant Agreement No. 101052200—EUROfusion and from the EPSRC (Grant Number EP/W006839/1). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union, the European Commission or the ITER organization. Neither the European Union nor the European Commission nor the ITER organization can be held responsible for them. This work was supported in part by Spanish Grants FIS2017-85252-R and PID2021-127727OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF 'A way of making Europe'. The BSC part of this work has contributed through the Spanish National R&D Project PID2019-110854RB-I00 funded through MCIN/AEI/10.13039/501100011033 and from the the Departament de Recerca i Universitats de la Generalitat de Catalunya with code 2021 SGR 00908. This scientific paper has been published as part of the international project co-financed by the Polish Ministry of Science and Higher Education within the programme called 'PMW' for 2023., Peer Reviewed, "Article signat per més de 50 autors/es: E.R. Solano, G. Birkenmeier, C. Silva, E. Delabie, J.C. Hillesheim, A. Baciero, I. Balboa, M. Baruzzo, A. Boboc, M. Brix, J. Bernardo, C. Bourdelle, I.S. Carvalho, P. Carvalho, C.D. Challis, M. Chernyshova, A. Chomiczewska, R. Coelho4, I. Coffey, T. Craciunescu11, E. de la Cal, E. de la Luna, R. Dumont, P. Dumortier, M. Fontana, J.M. Fontdecaba, L. Frassinetti, D. Gallart, J. Garcia, C. Giroud, W. Gromelski, R.B. Henriques, J. Hall, A. Ho, L.D. Horton, L. Horvath, P. Jacquet, I. Jepu, E. Joffrin, A. Kappatou, D.L. Keeling, D.B. King, V.G. Kiptily, K.K. Kirov, D. Kos, E. Kowalska-Strzęciwilk, M. Lennholm, E. Lerche, E. Litherland-Smith, A. Loarte, B. Lomanowski, P.J. Lomas, C.F. Maggi, J. Mailloux, M.J. Mantsinen, M. Maslov, A.G. Meigs, I. Monakhov, R.B. Morales, A.H. Nielsen, D. Nina, C. Noble, E. Pawelec, M. Poradzinski, G. Pucella, P. Puglia, D. Réfy, J. Juul Rasmussen, E. Righi, F.G. Rimini, T. Robinson, M. Sertoli, S.A. Silburn, G. Sips, P. Sirén, Ž. Štancar, H.J. Sun, G. Szepesi, D. Taylor, E. Tholerus, B. Thomas, G. Verdoolaege, P. Vincenzi, B. Viola, N. Vianello, T. Wilson and JET Contributors", Postprint (published version)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Acceleration of an Algorithm Based on the Maximum Likelihood Bolometric Tomography for the Determination of Uncertainties in the Radiation Emission on JET Using Heterogeneous Platforms

  • Ruiz González, Mariano|||0000-0002-1337-0110
  • Nieto Valhondo, Julián|||0000-0003-3315-7445
  • Costa Pérez, Victor|||0000-0003-2994-8420
  • Craciunescu, Teddy
  • Peluso, Emmanuele
  • Vega Sánchez, Jesús Antonio
  • Murari, Andrea|||0000-0002-3932-3865
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

An FFT based approach to account for elastic interactions in OkMC: Application to dislocation loops in iron

  • Santos Güemes, Rodrigo|||0000-0003-3190-2122
  • Ortiz, Christophe|||0000-0002-5146-0651
  • Segurado Escudero, Javier|||0000-0002-3617-2205
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Effect of Yttrium and Yttria Addition in Self-Passivating WCr SMART Material for First-Wall Application in a Fusion Power Plant

  • Chen, Jie|||0009-0000-7793-4352
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Rasinski, Marcin
  • Litnovsky, Andrey|||0000-0001-9791-4316
  • Nguyen-Manh, Duc|||0000-0001-6061-9946
  • Prestat, Eric|||0000-0003-1340-0970
  • Whitfield, Tamsin
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Bram, Martin|||0000-0002-1203-2777
  • Coenen, Jan Willem|||0000-0002-8579-908X
  • Linsmeier, Christian|||0000-0003-0404-7191
  • González-Julián, Jesús|||0000-0002-4217-8419
Archivo Digital UPM
Publicación Tesis doctoral (DoctoralThesis)

New methods for remote handling robotic procedures applied to environments under radiation

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Simulation, Structural, Thermal and Mechanical Properties of the FeTiTaVW High Entropy Alloy

  • Martins, Ricardo|||0000-0001-7768-5704
  • Gonçalves, António Pereira|||0000-0003-2640-3038
  • Correia, José Brito|||0000-0002-8314-0695
  • Galatanu, Andrei|||0000-0001-8474-8259
  • Alves, Eduardo
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Dias, Marta