Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband Empirical Green’s Function Extraction With Data Adaptive Phase Correlations

  • Ventosa, Sergio
  • Schimmel, Martin
17 pages, 11 figures, 2 appendixes.-- The data used in this study were obtained from the Incorporated Research Institutions of Seismology (IRIS) and the European Integrated Data Archive (EIDA). The CPU and GPU accelerated versions of code implementing CC1b,PCC and WPCC, and the two-stage ts-PWS are open source under the LGPL v3 license and available at https://github.com/sergiventosa/FastPCC, and at https://github.com/sergiventosa/ ts-PWS.-- © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Seismic ambient noise has a strongly nonstationary time-frequency statistics that demand better interstation correlation methods to improve the balance of highly variable ambient-noise sources, reduce the influence of high-energy poorly-distributed signals, and accelerate the convergence to a robust signal or a broadband empirical Green’s function (EGF). The wavelet cross-correlation method is convenient to analyze the statistics of the cross-correlation of two signals in terms of lag time and scale/frequency. Here, we introduce wavelet phase cross-correlation (WPCC) functions better adapted to the statistics of seismic ambient noise by combining the ideas of: using only the instantaneous phase information of the phase cross-correlation (PCC) method to assess amplitude unbiasedness, and analyzing cross-correlations scale by scale of the wavelet cross-correlation to balance strong and weak frequency components. These features allow WPCC to extract clean broadband signals useful for seismic imaging and monitoring studies. Further, we analyze and discuss benefits and limitations of WPCC compared to PCC in two examples using low-frequency seismic ambient noise (hum), but results are easily extrapolated to higher frequencies. In hum autocorrelations, WPCC can correct for the baseline and extract cleaner signals, and in hum cross-correlations, can extract richer and more frequency-balanced EGFs allowing for a significant increase of Rayleigh phase- and group-velocity measurements and an improvement of their accuracy. Finally, we offset the increase in computational cost of WPCC compared to PCC by using the graphics processing unit (GPU), and show that WPCC is an efficient approach that permits processing large data volumes as commonly encountered in seismic interferometry studies, This work was supported by the SANIMS Project under Grant RTI2018-095594-B-I00. S. Ventosa was also supported in part by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and in part by the European Union Next Generation (EU/PRTR) program through the PSI Project under Grant PLEC2021-007875. M. Schimmel was also supported by European Union’s Horizon Europe research and innovation programme through the AGEMERA project under Grant 10.3030/101058178. ICM has had funding support of the “Severo Ochoa Centre of Excellence” accreditation (CEX2019-000928-S) of the Spanish Research Agency, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The Horizon Europe AGEMERA Project: Innovative Non-Invasive Geophysical Methodologies for Mineral Exploration

  • Joutsenvaara, Jari
  • Holma, Kalle
  • Kuusiniemi, P.
  • Pirttijärvi, Markku
  • Tumara, Barbara Stimac
  • Schimmel, Martin
  • Martín, David
The AGEMERA project [1], which is an acronym for Agile Exploration and Geo-Modelling for European Critical Raw Materials, employs three non-invasive survey methods for mineral exploration: a passive seismic method to assess bedrock hardness and rock type boundaries; an integrated, multi-sensing fixed-wing drone system for measuring conductivity, magnetism, and radioactivity; and a multidetector system based on muon detection for detailed 2D, 3D, and 4D density profiles of large-volume rock bodies (with the 4th dimension being time). The technologies are designed to map geological structures in scenarios where traditional methods are either environmentally unsound or socially challenging. By the project's conclusion, these methods are anticipated to achieve a Technological Readiness Level (TRL) of 5 within a three-year timeline. The technologies vary in their operational capacities, including acquisition time, depth penetration, area coverage, and volume assessment. The multi-sensing drone effectively probes to 300-500 meter depth and can survey vast areas, up to hundreds of square kilometres, in a single campaign. Muography, on the other hand, can reach depths of up to 1000 metres and cover large volumes, up to a cubic kilometre. Passive seismic analysis, meanwhile, can survey any area and depth while a larger depth usually implies a lower resolution. While these techniques, especially when combined with deep 3D muography, may require extended periods for data collection, the valuable insights they offer make them a worthwhile investment. After conducting these innovative, non-invasive geophysical surveys, the findings will be consolidated in a web-based data repository. This repository will be accessible for in-depth analysis to enhance our understanding of critical raw material distribution., The project receives funding from the Horizon Europe program (Grant agreement ID: 101058178).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sobre las dependencias funcionales entre la densidad y las velocidades de las ondas P y S para rocas del Pirineo Central, On the dependencies between density, P-wave and S-wave velocities for the Central Pyrenees rocks

  • Cuchet, C.
  • Ayala, C.
  • Alcalde, Juan
  • Beamud, Elisabet
  • Clariana, Pilar
  • Soto, Ruth
  • Carbonell, Ramón
El conocimiento de las propiedades físicas de las rocas mediante medidas directas, ya sea en laboratorio o en sondeos, es fundamental para construir gemelos digitales precisos del ¿Sistema Tierra¿ en general y de contextos geológicos concretos, en particular. La obtención de medidas de propiedades físicas reales permite evaluar posibles relaciones entre ellas y, a partir de estas relaciones, extrapolar en zonas donde no se tengan datos. En este trabajo se presentan los primeros resultados de medidas de velocidades de las ondas P (Vp) y S (Vs) en muestras de rocas del Pirineo Central de distintas litologías realizadas con el dispositivo portátil A1220 MONOLITH 3D. Para ello se utilizaron muestras de roca, cortadas en cubos, de dos tamaños distintos (2 cm de lado y unos 10 cm de lado) donde previamente se había medido su densidad mediante el principio de Arquímedes. Ello permitió testar las posibles limitaciones del aparato en función del tamaño de las muestras y las ventajas de su uso cuando no se pueden obtener medidas directamente en el campo y/o cuando las muestras que se pretenden medir no tienen el tamaño suficiente como para utilizar instrumentos más sofisticados como el corescan. Los resultados indican una correlación lineal entre Vp y Vs para todo tipo de rocas mientras que la relación entre las velocidades de las ondas sísmicas y las densidades no es lineal, sino que muestra un rango de variación que no siempre puede ser ajustado mediante una función polinómica., Knowledge of the physical properties of rocks through direct measurements, whether in the laboratory or in drillholes, is essential to build accurate digital twins of the “Earth System” in general and of specific geological contexts, in particular. Obtaining measurements of real physical properties allows us to evaluate possible relationships between them and, from these relationships, extrapolate in areas where data are not available. This work presents the first results of the measurements of P-wave (Vp) and Swave (Vs) velocities in rock samples from the Central Pyrenees carried out with the portable measuring instrument A1220 MONOLITH 3D. For this, rock samples were used, cut into cubes, of two different sizes (2 cm on a side and about 10 cm on a side) where their density had previously been measured using Archimedes’s principle. This allowed us to test the possible limitations of the device depending on the size of the samples and the advantages of its use when measurements cannot be obtained directly in the field and/or when the samples to be measured are not large enough to use instruments more sophisticated like corescan. The results show a linear correlation between Vp and Vs for all types of rocks while the relationship between seismic wave velocities and densities is not linear, but rather shows a range of variation that cannot always be adjusted by a polynomial function., This contribution is supported by the EU project AGEMERA, funded under the European Union’s Horizon Europe research and innovation programme, grant agreement n. 101058178 and the IMAGYN project, PID2020-114273GB-C22, funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rayleigh wave ellipticity from ambient noise: A practical method for monitoring seismic velocity variations in the near-surface

  • Seivane, Helena
  • Schimmel, Martin
  • Martí, David
  • Sánchez-Pastor, Pilar
This study explores the feasibility and limitations of using Rayleigh wave (Rg) ellipticity for noise-based seismic monitoring at near-surface depths (4–70 m). We use the degree of polarization (DOP) method to extract the Rayleigh wave ellipticity from seismic noise recordings, employing normalized cross-correlation and cross-covariance coefficients to quantify ellipticity variations over time. Synthetic models and field data from three distinct case studies—Garner Valley, California; Riotinto mine, Spain; and the 2011 submarine volcanic eruption on El Hierro Island, Canary Islands—validate our approach. In these field applications, our method effectively tracks the seasonality of the shallow groundwater levels in Garner Valley, monitors pore pressure variations at the tailings dam of Riotinto mine, and detects volcanic induced changes on El Hierro, demonstrating robust performance even with variable noise sources. Our results indicate that Rayleigh wave ellipticity is a versatile tool for subsurface monitoring, capable of detecting velocity changes across a broad depth range. Our methodology represents a new independent and non-interferometric approach that enhances the detection of subsurface changes while improving resolution and exploration depth in seismic monitoring techniques., This work has received funding from the AGEMERA project, financed by the European Union's Horizon Europe research and innovation programme under grant agreement N° 101058178. H.S. acknowledges the 5 months of contract that supported the initial stage of this work and were funded by the STONE project (CPP2021-0090072), financed with funds from the Ministry of Science and Innovation through the State Agency for Innovation (MCIN/AEI/10.13039/501100011033) and the European Union-Next Generation through the Recovery, Transformation and Resilience Plan (PRTR). As well, all the authors express their gratitude to Dr. Mario Ruiz from GEO3BCN-CSIC LabSis Laboratory for his always-present support, and especially for his work with the seismic instrumentation deployed in Riotinto mine. Likewise, H.S. acknowledges Dr. Andrés Olivar Castaño from the University of Potsdam for his help in her initial stages of Python programming, which contributed to the development of this work. We are very thankful to Dr. Paolo Frattini for all work involved with handling the manuscript and two anonymous reviewers for their careful and constructive reviews.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Horizon Europe AGEMERA Project: Innovative Non-Invasive Geophysical Methodologies for Mineral Exploration

  • Joutsenvaara, Jari
  • Holma, Marko
  • Kuusiniemi, Pasi
  • Korteniemi, Jarmo
  • Seivane Ramos, Helena
  • Martí, David
  • Schimmel, Martin
  • Casini, Giulio
  • Buffett, Grant
  • Pirttijärvi, Markku
  • Saartenoja, Ari
  • Tumara, Barbara Stimac
  • Kapustin, Ivan
[EN] The AGEMERA project (Agile Exploration and Geo-Modelling for European Critical Raw Materials) advances the exploration of critical raw materials in the EU by deploying innovative, non-invasive geophysical technologies. Funded by the Horizon Europe programme, it aligns with the European Critical Raw Materials Act to enhance resource security and sustainability. Utilising passive seismic methods, drone-based electromagnetic sensing, and muography, the project maps subsurface characteristics across multiple countries in Europe and Zambia. Outcomes are integrated into a dynamic web-based platform for enhanced co-visualisation of different data sets., This research has been supported by the HORIZON EUROPE Digital, Industry and Space (grant no. 101058178)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring diffuse volcanic degassing with seismic ambient noise

  • Seivane Ramos, Helena
  • Schimmel, Martin
20 pages, 8 figures, 1 appendix.-- Data availability: The seismic data used in this study are publicly available through FDSN data services for the ES network (https://doi.org/10.7914/SN/ES, Instituto Geografico Nacional, 1999) and the 9A networks (https://doi.org/10.14470/4N7576350874, Walter et al., 2021). The atmospheric data were obtained from the ERA5 database (https://cds.climate.copernicus.eu/datasets/, last access: 29 August 2025).-- Code availability: The link to the source routines for the degree of polarization method (Schimmel and Gallart, 2004) are described in Berbellini et al. (2019) and available at https://github.com/berbellini/DOP-E (Berbellini and Schimmel, 2026), Diffuse volcanic degassing is a persistent and often underestimated natural hazard, with potential impacts on air quality, ecosystem health, and volcanic risk management. Detecting and monitoring this process is challenging, especially in volcanoes lacking visible fumarolic activity, where the final stage of gas migration is jointly modulated by the shallow subsurface structure and natural pressure forcings. We present a continuous monitoring approach based on Rayleigh wave ellipticity from ambient seismic noise to track pressure-driven gas transport in the uppermost soil layers. Applied to Cumbre Vieja Volcano (La Palma, Canary Islands), the method detects subdaily seismic velocity variations linked to periodic pressure oscillations, consistent with natural forcings such as atmospheric and solid earth tides. In this work, we focus on the terdiurnal cycle, the only subdaily band at La Palma Island that reflects purely atmospheric pressure forcing. Its temporal evolution reveals long-term fluctuations that broadly coincide with reported CO<inf>2</inf> emission trends, despite differences in spatial and temporal resolution between both estimates. In addition, we identify a clear semiannual cycle in the long-term ellipticity response at the terdiurnal frequency. This seasonality coincides with the modulation by solid Earth tides and confirms their role in controlling permeability in the upper vadose zone and in the enhancement of barometric pumping efficiency across all stations analyzed. Prior to the 2021 eruption, the terdiurnal cycle reveals contrasting station responses, with TBT exhibiting the earliest and most sustained increase. Together, these observations point to the usefulness of this approach as a complementary tool in the assessment of diffuse degassing and volcanic unrest. This seismic-noise-based approach offers a cost-effective and resilient strategy for detecting hazardous gas migration, supporting early warning and mitigation efforts in volcanic regions, This research has been supported by the HORIZON EUROPE European Institute of Innovation and Technology (grant no. 101058178). The article processing charges for this open-access publication were covered by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed